/*
 * Copyright 2003 Digi International (www.digi.com)
 *      Scott H Kilau <Scott_Kilau at digi dot com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
 * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
 * PURPOSE.  See the GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 *	NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!!
 *
 *************************************************************************
 *
 * Driver includes
 *
 *************************************************************************/

#ifndef __DGNC_DRIVER_H
#define __DGNC_DRIVER_H

#include <linux/types.h>	/* To pick up the varions Linux types */
#include <linux/tty.h>	  /* To pick up the various tty structs/defines */
#include <linux/interrupt.h>	/* For irqreturn_t type */

#include "dgnc_types.h"		/* Additional types needed by the Digi header files */
#include "digi.h"		/* Digi specific ioctl header */
#include "dgnc_kcompat.h"	/* Kernel 2.4/2.6 compat includes */
#include "dgnc_sysfs.h"		/* Support for SYSFS */

/*************************************************************************
 *
 * Driver defines
 *
 *************************************************************************/

/*
 * Driver identification, error and debugging statments
 *
 * In theory, you can change all occurrences of "digi" in the next
 * three lines, and the driver printk's will all automagically change.
 *
 * APR((fmt, args, ...));	Always prints message
 * DPR((fmt, args, ...));	Only prints if DGNC_TRACER is defined at
 *				  compile time and dgnc_debug!=0
 */
#define	PROCSTR		"dgnc"			/* /proc entries	 */
#define	DEVSTR		"/dev/dg/dgnc"		/* /dev entries		 */
#define	DRVSTR		"dgnc"			/* Driver name string
						 * displayed by APR	 */
#define	APR(args)	do { PRINTF_TO_KMEM(args); printk(DRVSTR": "); printk args; \
			   } while (0)
#define	RAPR(args)	do { PRINTF_TO_KMEM(args); printk args; } while (0)

#define TRC_TO_CONSOLE 1

/*
 * Debugging levels can be set using debug insmod variable
 * They can also be compiled out completely.
 */

#define	DBG_INIT		(dgnc_debug & 0x01)
#define	DBG_BASIC		(dgnc_debug & 0x02)
#define	DBG_CORE		(dgnc_debug & 0x04)

#define	DBG_OPEN		(dgnc_debug & 0x08)
#define	DBG_CLOSE		(dgnc_debug & 0x10)
#define	DBG_READ		(dgnc_debug & 0x20)
#define	DBG_WRITE		(dgnc_debug & 0x40)

#define	DBG_IOCTL		(dgnc_debug & 0x80)

#define	DBG_PROC		(dgnc_debug & 0x100)
#define	DBG_PARAM		(dgnc_debug & 0x200)
#define	DBG_PSCAN		(dgnc_debug & 0x400)
#define	DBG_EVENT		(dgnc_debug & 0x800)

#define	DBG_DRAIN		(dgnc_debug & 0x1000)
#define	DBG_MSIGS		(dgnc_debug & 0x2000)

#define	DBG_MGMT		(dgnc_debug & 0x4000)
#define	DBG_INTR		(dgnc_debug & 0x8000)

#define	DBG_CARR		(dgnc_debug & 0x10000)

#define PRINTF_TO_KMEM(args)
# define TRC(ARGS)
# define DPR_INIT(ARGS)
# define DPR_BASIC(ARGS)
# define DPR_CORE(ARGS)
# define DPR_OPEN(ARGS)
# define DPR_CLOSE(ARGS)
# define DPR_READ(ARGS)
# define DPR_WRITE(ARGS)
# define DPR_IOCTL(ARGS)
# define DPR_PROC(ARGS)
# define DPR_PARAM(ARGS)
# define DPR_PSCAN(ARGS)
# define DPR_EVENT(ARGS)
# define DPR_DRAIN(ARGS)
# define DPR_CARR(ARGS)
# define DPR_MGMT(ARGS)
# define DPR_INTR(ARGS)
# define DPR_MSIGS(ARGS)

# define DPR(args)

/* Number of boards we support at once. */
#define	MAXBOARDS	20
#define	MAXPORTS	8
#define MAXTTYNAMELEN	200

/* Our 3 magic numbers for our board, channel and unit structs */
#define DGNC_BOARD_MAGIC	0x5c6df104
#define DGNC_CHANNEL_MAGIC	0x6c6df104
#define DGNC_UNIT_MAGIC		0x7c6df104

/* Serial port types */
#define DGNC_SERIAL		0
#define DGNC_PRINT		1

#define	SERIAL_TYPE_NORMAL	1

#define PORT_NUM(dev)	((dev) & 0x7f)
#define IS_PRINT(dev)	(((dev) & 0xff) >= 0x80)

/* MAX number of stop characters we will send when our read queue is getting full */
#define MAX_STOPS_SENT 5

/* 4 extra for alignment play space */
#define WRITEBUFLEN		((4096) + 4)
#define MYFLIPLEN		N_TTY_BUF_SIZE

#define dgnc_jiffies_from_ms(a) (((a) * HZ) / 1000)

/*
 * Define a local default termios struct. All ports will be created
 * with this termios initially.  This is the same structure that is defined
 * as the default in tty_io.c with the same settings overriden as in serial.c
 *
 * In short, this should match the internal serial ports' defaults.
 */
#define	DEFAULT_IFLAGS	(ICRNL | IXON)
#define	DEFAULT_OFLAGS	(OPOST | ONLCR)
#define	DEFAULT_CFLAGS	(B9600 | CS8 | CREAD | HUPCL | CLOCAL)
#define	DEFAULT_LFLAGS	(ISIG | ICANON | ECHO | ECHOE | ECHOK | \
			ECHOCTL | ECHOKE | IEXTEN)

#ifndef _POSIX_VDISABLE
#define   _POSIX_VDISABLE '\0'
#endif

#define SNIFF_MAX	65536		/* Sniff buffer size (2^n) */
#define SNIFF_MASK	(SNIFF_MAX - 1)	/* Sniff wrap mask */

/*
 * Lock function/defines.
 * Makes spotting lock/unlock locations easier.
 */
# define DGNC_SPINLOCK_INIT(x)		spin_lock_init(&(x))
# define DGNC_LOCK(x, y)		spin_lock_irqsave(&(x), y)
# define DGNC_UNLOCK(x, y)		spin_unlock_irqrestore(&(x), y)

/*
 * All the possible states the driver can be while being loaded.
 */
enum {
	DRIVER_INITIALIZED = 0,
	DRIVER_READY
};

/*
 * All the possible states the board can be while booting up.
 */
enum {
	BOARD_FAILED = 0,
	BOARD_FOUND,
	BOARD_READY
};


/*************************************************************************
 *
 * Structures and closely related defines.
 *
 *************************************************************************/

struct dgnc_board;
struct channel_t;

/************************************************************************
 * Per board operations structure				       *
 ************************************************************************/
struct board_ops {
	void (*tasklet) (unsigned long data);
	irqreturn_t (*intr) (int irq, void *voidbrd);
	void (*uart_init) (struct channel_t *ch);
	void (*uart_off) (struct channel_t *ch);
	int  (*drain) (struct tty_struct *tty, uint seconds);
	void (*param) (struct tty_struct *tty);
	void (*vpd) (struct dgnc_board *brd);
	void (*assert_modem_signals) (struct channel_t *ch);
	void (*flush_uart_write) (struct channel_t *ch);
	void (*flush_uart_read) (struct channel_t *ch);
	void (*disable_receiver) (struct channel_t *ch);
	void (*enable_receiver) (struct channel_t *ch);
	void (*send_break) (struct channel_t *ch, int);
	void (*send_start_character) (struct channel_t *ch);
	void (*send_stop_character) (struct channel_t *ch);
	void (*copy_data_from_queue_to_uart) (struct channel_t *ch);
	uint (*get_uart_bytes_left) (struct channel_t *ch);
	void (*send_immediate_char) (struct channel_t *ch, unsigned char);
};

/************************************************************************
 * Device flag definitions for bd_flags.
 ************************************************************************/
#define BD_IS_PCI_EXPRESS     0x0001	  /* Is a PCI Express board */


/*
 *	Per-board information
 */
struct dgnc_board {
	int		magic;		/* Board Magic number.  */
	int		boardnum;	/* Board number: 0-32 */

	int		type;		/* Type of board */
	char		*name;		/* Product Name */
	struct pci_dev	*pdev;		/* Pointer to the pci_dev struct */
	unsigned long	bd_flags;	/* Board flags */
	u16		vendor;		/* PCI vendor ID */
	u16		device;		/* PCI device ID */
	u16		subvendor;	/* PCI subsystem vendor ID */
	u16		subdevice;	/* PCI subsystem device ID */
	uchar		rev;		/* PCI revision ID */
	uint		pci_bus;	/* PCI bus value */
	uint		pci_slot;	/* PCI slot value */
	uint		maxports;	/* MAX ports this board can handle */
	uchar		dvid;		/* Board specific device id */
	uchar		vpd[128];	/* VPD of board, if found */
	uchar		serial_num[20];	/* Serial number of board, if found in VPD */

	spinlock_t	bd_lock;	/* Used to protect board */

	spinlock_t	bd_intr_lock;	/* Used to protect the poller tasklet and
					 * the interrupt routine from each other.
					 */

	uint		state;		/* State of card. */
	wait_queue_head_t state_wait;	/* Place to sleep on for state change */

	struct		tasklet_struct helper_tasklet; /* Poll helper tasklet */

	uint		nasync;		/* Number of ports on card */

	uint		irq;		/* Interrupt request number */
	ulong		intr_count;	/* Count of interrupts */
	ulong		intr_modem;	/* Count of interrupts */
	ulong		intr_tx;	/* Count of interrupts */
	ulong		intr_rx;	/* Count of interrupts */

	ulong		membase;	/* Start of base memory of the card */
	ulong		membase_end;	/* End of base memory of the card */

	u8 __iomem		*re_map_membase;/* Remapped memory of the card */

	ulong		iobase;		/* Start of io base of the card */
	ulong		iobase_end;	/* End of io base of the card */

	uint		bd_uart_offset;	/* Space between each UART */

	struct channel_t *channels[MAXPORTS]; /* array of pointers to our channels. */

	struct tty_driver	SerialDriver;
	char		SerialName[200];
	struct tty_driver	PrintDriver;
	char		PrintName[200];

	uint		dgnc_Major_Serial_Registered;
	uint		dgnc_Major_TransparentPrint_Registered;

	uint		dgnc_Serial_Major;
	uint		dgnc_TransparentPrint_Major;

	uint		TtyRefCnt;

	char		*flipbuf;	/* Our flip buffer, alloced if board is found */

	u16		dpatype;	/* The board "type", as defined by DPA */
	u16		dpastatus;	/* The board "status", as defined by DPA */

	/*
	 *	Mgmt data.
	 */
	char		*msgbuf_head;
	char		*msgbuf;

	uint		bd_dividend;	/* Board/UARTs specific dividend */

	struct board_ops *bd_ops;

	/* /proc/<board> entries */
	struct proc_dir_entry *proc_entry_pointer;
	struct dgnc_proc_entry *dgnc_board_table;

};


/************************************************************************
 * Unit flag definitions for un_flags.
 ************************************************************************/
#define UN_ISOPEN	0x0001		/* Device is open		*/
#define UN_CLOSING	0x0002		/* Line is being closed		*/
#define UN_IMM		0x0004		/* Service immediately		*/
#define UN_BUSY		0x0008		/* Some work this channel	*/
#define UN_BREAKI	0x0010		/* Input break received		*/
#define UN_PWAIT	0x0020		/* Printer waiting for terminal	*/
#define UN_TIME		0x0040		/* Waiting on time		*/
#define UN_EMPTY	0x0080		/* Waiting output queue empty	*/
#define UN_LOW		0x0100		/* Waiting output low water mark*/
#define UN_EXCL_OPEN	0x0200		/* Open for exclusive use	*/
#define UN_WOPEN	0x0400		/* Device waiting for open	*/
#define UN_WIOCTL	0x0800		/* Device waiting for open	*/
#define UN_HANGUP	0x8000		/* Carrier lost			*/

struct device;

/************************************************************************
 * Structure for terminal or printer unit.
 ************************************************************************/
struct un_t {
	int	magic;		/* Unit Magic Number.			*/
	struct	channel_t *un_ch;
	ulong	un_time;
	uint	un_type;
	uint	un_open_count;	/* Counter of opens to port		*/
	struct tty_struct *un_tty;/* Pointer to unit tty structure	*/
	uint	un_flags;	/* Unit flags				*/
	wait_queue_head_t un_flags_wait; /* Place to sleep to wait on unit */
	uint	un_dev;		/* Minor device number			*/
	struct device *un_sysfs;
};


/************************************************************************
 * Device flag definitions for ch_flags.
 ************************************************************************/
#define CH_PRON		0x0001		/* Printer on string		*/
#define CH_STOP		0x0002		/* Output is stopped		*/
#define CH_STOPI	0x0004		/* Input is stopped		*/
#define CH_CD		0x0008		/* Carrier is present		*/
#define CH_FCAR		0x0010		/* Carrier forced on		*/
#define CH_HANGUP       0x0020		/* Hangup received		*/

#define CH_RECEIVER_OFF	0x0040		/* Receiver is off		*/
#define CH_OPENING	0x0080		/* Port in fragile open state	*/
#define CH_CLOSING	0x0100		/* Port in fragile close state	*/
#define CH_FIFO_ENABLED 0x0200		/* Port has FIFOs enabled	*/
#define CH_TX_FIFO_EMPTY 0x0400		/* TX Fifo is completely empty	*/
#define CH_TX_FIFO_LWM  0x0800		/* TX Fifo is below Low Water	*/
#define CH_BREAK_SENDING 0x1000		/* Break is being sent		*/
#define CH_LOOPBACK 0x2000		/* Channel is in lookback mode	*/
#define CH_FLIPBUF_IN_USE 0x4000	/* Channel's flipbuf is in use	*/
#define CH_BAUD0	0x08000		/* Used for checking B0 transitions */
#define CH_FORCED_STOP  0x20000		/* Output is forcibly stopped	*/
#define CH_FORCED_STOPI 0x40000		/* Input is forcibly stopped	*/

/*
 * Definitions for ch_sniff_flags
 */
#define SNIFF_OPEN	0x1
#define SNIFF_WAIT_DATA	0x2
#define SNIFF_WAIT_SPACE 0x4


/* Our Read/Error/Write queue sizes */
#define RQUEUEMASK	0x1FFF		/* 8 K - 1 */
#define EQUEUEMASK	0x1FFF		/* 8 K - 1 */
#define WQUEUEMASK	0x0FFF		/* 4 K - 1 */
#define RQUEUESIZE	(RQUEUEMASK + 1)
#define EQUEUESIZE	RQUEUESIZE
#define WQUEUESIZE	(WQUEUEMASK + 1)


/************************************************************************
 * Channel information structure.
 ************************************************************************/
struct channel_t {
	int magic;			/* Channel Magic Number		*/
	struct dgnc_board	*ch_bd;		/* Board structure pointer      */
	struct digi_t	ch_digi;	/* Transparent Print structure  */
	struct un_t	ch_tun;		/* Terminal unit info	   */
	struct un_t	ch_pun;		/* Printer unit info	    */

	spinlock_t	ch_lock;	/* provide for serialization */
	wait_queue_head_t ch_flags_wait;

	uint		ch_portnum;	/* Port number, 0 offset.	*/
	uint		ch_open_count;	/* open count			*/
	uint		ch_flags;	/* Channel flags		*/

	ulong		ch_close_delay;	/* How long we should drop RTS/DTR for */

	ulong		ch_cpstime;	/* Time for CPS calculations    */

	tcflag_t	ch_c_iflag;	/* channel iflags	       */
	tcflag_t	ch_c_cflag;	/* channel cflags	       */
	tcflag_t	ch_c_oflag;	/* channel oflags	       */
	tcflag_t	ch_c_lflag;	/* channel lflags	       */
	uchar		ch_stopc;	/* Stop character	       */
	uchar		ch_startc;	/* Start character	      */

	uint		ch_old_baud;	/* Cache of the current baud */
	uint		ch_custom_speed;/* Custom baud, if set */

	uint		ch_wopen;	/* Waiting for open process cnt */

	uchar		ch_mostat;	/* FEP output modem status      */
	uchar		ch_mistat;	/* FEP input modem status       */

	struct neo_uart_struct __iomem *ch_neo_uart;	/* Pointer to the "mapped" UART struct */
	struct cls_uart_struct __iomem *ch_cls_uart;	/* Pointer to the "mapped" UART struct */

	uchar		ch_cached_lsr;	/* Cached value of the LSR register */

	uchar		*ch_rqueue;	/* Our read queue buffer - malloc'ed */
	ushort		ch_r_head;	/* Head location of the read queue */
	ushort		ch_r_tail;	/* Tail location of the read queue */

	uchar		*ch_equeue;	/* Our error queue buffer - malloc'ed */
	ushort		ch_e_head;	/* Head location of the error queue */
	ushort		ch_e_tail;	/* Tail location of the error queue */

	uchar		*ch_wqueue;	/* Our write queue buffer - malloc'ed */
	ushort		ch_w_head;	/* Head location of the write queue */
	ushort		ch_w_tail;	/* Tail location of the write queue */

	ulong		ch_rxcount;	/* total of data received so far */
	ulong		ch_txcount;	/* total of data transmitted so far */

	uchar		ch_r_tlevel;	/* Receive Trigger level */
	uchar		ch_t_tlevel;	/* Transmit Trigger level */

	uchar		ch_r_watermark;	/* Receive Watermark */

	ulong		ch_stop_sending_break;	/* Time we should STOP sending a break */

	uint		ch_stops_sent;	/* How many times I have sent a stop character
					 * to try to stop the other guy sending.
					 */
	ulong		ch_err_parity;	/* Count of parity errors on channel */
	ulong		ch_err_frame;	/* Count of framing errors on channel */
	ulong		ch_err_break;	/* Count of breaks on channel */
	ulong		ch_err_overrun; /* Count of overruns on channel */

	ulong		ch_xon_sends;	/* Count of xons transmitted */
	ulong		ch_xoff_sends;	/* Count of xoffs transmitted */

	ulong		ch_intr_modem;	/* Count of interrupts */
	ulong		ch_intr_tx;	/* Count of interrupts */
	ulong		ch_intr_rx;	/* Count of interrupts */


	/* /proc/<board>/<channel> entries */
	struct proc_dir_entry *proc_entry_pointer;
	struct dgnc_proc_entry *dgnc_channel_table;

	uint ch_sniff_in;
	uint ch_sniff_out;
	char *ch_sniff_buf;		/* Sniff buffer for proc */
	ulong ch_sniff_flags;		/* Channel flags		*/
	wait_queue_head_t ch_sniff_wait;
};


/*************************************************************************
 *
 * Prototypes for non-static functions used in more than one module
 *
 *************************************************************************/

extern int		dgnc_ms_sleep(ulong ms);
extern char		*dgnc_ioctl_name(int cmd);

/*
 * Our Global Variables.
 */
extern int		dgnc_driver_state;	/* The state of the driver	*/
extern uint		dgnc_Major;		/* Our driver/mgmt major	*/
extern int		dgnc_debug;		/* Debug variable		*/
extern int		dgnc_rawreadok;		/* Set if user wants rawreads	*/
extern int		dgnc_poll_tick;		/* Poll interval - 20 ms	*/
extern int		dgnc_trcbuf_size;	/* Size of the ringbuffer	*/
extern spinlock_t	dgnc_global_lock;	/* Driver global spinlock	*/
extern uint		dgnc_NumBoards;		/* Total number of boards	*/
extern struct dgnc_board	*dgnc_Board[MAXBOARDS];	/* Array of board structs	*/
extern ulong		dgnc_poll_counter;	/* Times the poller has run	*/
extern char		*dgnc_state_text[];	/* Array of state text		*/
extern char		*dgnc_driver_state_text[];/* Array of driver state text */

#endif