This is
/tmp/dgboter/bbs/rhev-vm2--rhe6x86_64/buildbot/rhe6x86_64--aarch64-none-linux-gnu/build/build-aarch64-none-linux-gnu/obj/glibc/manual/libc.info,
produced by makeinfo version 4.13 from libc.texinfo.

INFO-DIR-SECTION Software libraries
START-INFO-DIR-ENTRY
* Libc: (libc).                 C library.
END-INFO-DIR-ENTRY

INFO-DIR-SECTION GNU C library functions and macros
START-INFO-DIR-ENTRY
* ALTWERASE: (libc)Local Modes.
* ARGP_ERR_UNKNOWN: (libc)Argp Parser Functions.
* ARG_MAX: (libc)General Limits.
* BC_BASE_MAX: (libc)Utility Limits.
* BC_DIM_MAX: (libc)Utility Limits.
* BC_SCALE_MAX: (libc)Utility Limits.
* BC_STRING_MAX: (libc)Utility Limits.
* BRKINT: (libc)Input Modes.
* BUFSIZ: (libc)Controlling Buffering.
* CCTS_OFLOW: (libc)Control Modes.
* CHAR_BIT: (libc)Width of Type.
* CHILD_MAX: (libc)General Limits.
* CIGNORE: (libc)Control Modes.
* CLK_TCK: (libc)Processor Time.
* CLOCAL: (libc)Control Modes.
* CLOCKS_PER_SEC: (libc)CPU Time.
* COLL_WEIGHTS_MAX: (libc)Utility Limits.
* CPU_CLR: (libc)CPU Affinity.
* CPU_ISSET: (libc)CPU Affinity.
* CPU_SET: (libc)CPU Affinity.
* CPU_SETSIZE: (libc)CPU Affinity.
* CPU_ZERO: (libc)CPU Affinity.
* CREAD: (libc)Control Modes.
* CRTS_IFLOW: (libc)Control Modes.
* CS5: (libc)Control Modes.
* CS6: (libc)Control Modes.
* CS7: (libc)Control Modes.
* CS8: (libc)Control Modes.
* CSIZE: (libc)Control Modes.
* CSTOPB: (libc)Control Modes.
* DTTOIF: (libc)Directory Entries.
* E2BIG: (libc)Error Codes.
* EACCES: (libc)Error Codes.
* EADDRINUSE: (libc)Error Codes.
* EADDRNOTAVAIL: (libc)Error Codes.
* EADV: (libc)Error Codes.
* EAFNOSUPPORT: (libc)Error Codes.
* EAGAIN: (libc)Error Codes.
* EALREADY: (libc)Error Codes.
* EAUTH: (libc)Error Codes.
* EBACKGROUND: (libc)Error Codes.
* EBADE: (libc)Error Codes.
* EBADF: (libc)Error Codes.
* EBADFD: (libc)Error Codes.
* EBADMSG: (libc)Error Codes.
* EBADR: (libc)Error Codes.
* EBADRPC: (libc)Error Codes.
* EBADRQC: (libc)Error Codes.
* EBADSLT: (libc)Error Codes.
* EBFONT: (libc)Error Codes.
* EBUSY: (libc)Error Codes.
* ECANCELED: (libc)Error Codes.
* ECHILD: (libc)Error Codes.
* ECHO: (libc)Local Modes.
* ECHOCTL: (libc)Local Modes.
* ECHOE: (libc)Local Modes.
* ECHOK: (libc)Local Modes.
* ECHOKE: (libc)Local Modes.
* ECHONL: (libc)Local Modes.
* ECHOPRT: (libc)Local Modes.
* ECHRNG: (libc)Error Codes.
* ECOMM: (libc)Error Codes.
* ECONNABORTED: (libc)Error Codes.
* ECONNREFUSED: (libc)Error Codes.
* ECONNRESET: (libc)Error Codes.
* ED: (libc)Error Codes.
* EDEADLK: (libc)Error Codes.
* EDEADLOCK: (libc)Error Codes.
* EDESTADDRREQ: (libc)Error Codes.
* EDIED: (libc)Error Codes.
* EDOM: (libc)Error Codes.
* EDOTDOT: (libc)Error Codes.
* EDQUOT: (libc)Error Codes.
* EEXIST: (libc)Error Codes.
* EFAULT: (libc)Error Codes.
* EFBIG: (libc)Error Codes.
* EFTYPE: (libc)Error Codes.
* EGRATUITOUS: (libc)Error Codes.
* EGREGIOUS: (libc)Error Codes.
* EHOSTDOWN: (libc)Error Codes.
* EHOSTUNREACH: (libc)Error Codes.
* EHWPOISON: (libc)Error Codes.
* EIDRM: (libc)Error Codes.
* EIEIO: (libc)Error Codes.
* EILSEQ: (libc)Error Codes.
* EINPROGRESS: (libc)Error Codes.
* EINTR: (libc)Error Codes.
* EINVAL: (libc)Error Codes.
* EIO: (libc)Error Codes.
* EISCONN: (libc)Error Codes.
* EISDIR: (libc)Error Codes.
* EISNAM: (libc)Error Codes.
* EKEYEXPIRED: (libc)Error Codes.
* EKEYREJECTED: (libc)Error Codes.
* EKEYREVOKED: (libc)Error Codes.
* EL2HLT: (libc)Error Codes.
* EL2NSYNC: (libc)Error Codes.
* EL3HLT: (libc)Error Codes.
* EL3RST: (libc)Error Codes.
* ELIBACC: (libc)Error Codes.
* ELIBBAD: (libc)Error Codes.
* ELIBEXEC: (libc)Error Codes.
* ELIBMAX: (libc)Error Codes.
* ELIBSCN: (libc)Error Codes.
* ELNRNG: (libc)Error Codes.
* ELOOP: (libc)Error Codes.
* EMEDIUMTYPE: (libc)Error Codes.
* EMFILE: (libc)Error Codes.
* EMLINK: (libc)Error Codes.
* EMSGSIZE: (libc)Error Codes.
* EMULTIHOP: (libc)Error Codes.
* ENAMETOOLONG: (libc)Error Codes.
* ENAVAIL: (libc)Error Codes.
* ENEEDAUTH: (libc)Error Codes.
* ENETDOWN: (libc)Error Codes.
* ENETRESET: (libc)Error Codes.
* ENETUNREACH: (libc)Error Codes.
* ENFILE: (libc)Error Codes.
* ENOANO: (libc)Error Codes.
* ENOBUFS: (libc)Error Codes.
* ENOCSI: (libc)Error Codes.
* ENODATA: (libc)Error Codes.
* ENODEV: (libc)Error Codes.
* ENOENT: (libc)Error Codes.
* ENOEXEC: (libc)Error Codes.
* ENOKEY: (libc)Error Codes.
* ENOLCK: (libc)Error Codes.
* ENOLINK: (libc)Error Codes.
* ENOMEDIUM: (libc)Error Codes.
* ENOMEM: (libc)Error Codes.
* ENOMSG: (libc)Error Codes.
* ENONET: (libc)Error Codes.
* ENOPKG: (libc)Error Codes.
* ENOPROTOOPT: (libc)Error Codes.
* ENOSPC: (libc)Error Codes.
* ENOSR: (libc)Error Codes.
* ENOSTR: (libc)Error Codes.
* ENOSYS: (libc)Error Codes.
* ENOTBLK: (libc)Error Codes.
* ENOTCONN: (libc)Error Codes.
* ENOTDIR: (libc)Error Codes.
* ENOTEMPTY: (libc)Error Codes.
* ENOTNAM: (libc)Error Codes.
* ENOTRECOVERABLE: (libc)Error Codes.
* ENOTSOCK: (libc)Error Codes.
* ENOTSUP: (libc)Error Codes.
* ENOTTY: (libc)Error Codes.
* ENOTUNIQ: (libc)Error Codes.
* ENXIO: (libc)Error Codes.
* EOF: (libc)EOF and Errors.
* EOPNOTSUPP: (libc)Error Codes.
* EOVERFLOW: (libc)Error Codes.
* EOWNERDEAD: (libc)Error Codes.
* EPERM: (libc)Error Codes.
* EPFNOSUPPORT: (libc)Error Codes.
* EPIPE: (libc)Error Codes.
* EPROCLIM: (libc)Error Codes.
* EPROCUNAVAIL: (libc)Error Codes.
* EPROGMISMATCH: (libc)Error Codes.
* EPROGUNAVAIL: (libc)Error Codes.
* EPROTO: (libc)Error Codes.
* EPROTONOSUPPORT: (libc)Error Codes.
* EPROTOTYPE: (libc)Error Codes.
* EQUIV_CLASS_MAX: (libc)Utility Limits.
* ERANGE: (libc)Error Codes.
* EREMCHG: (libc)Error Codes.
* EREMOTE: (libc)Error Codes.
* EREMOTEIO: (libc)Error Codes.
* ERESTART: (libc)Error Codes.
* ERFKILL: (libc)Error Codes.
* EROFS: (libc)Error Codes.
* ERPCMISMATCH: (libc)Error Codes.
* ESHUTDOWN: (libc)Error Codes.
* ESOCKTNOSUPPORT: (libc)Error Codes.
* ESPIPE: (libc)Error Codes.
* ESRCH: (libc)Error Codes.
* ESRMNT: (libc)Error Codes.
* ESTALE: (libc)Error Codes.
* ESTRPIPE: (libc)Error Codes.
* ETIME: (libc)Error Codes.
* ETIMEDOUT: (libc)Error Codes.
* ETOOMANYREFS: (libc)Error Codes.
* ETXTBSY: (libc)Error Codes.
* EUCLEAN: (libc)Error Codes.
* EUNATCH: (libc)Error Codes.
* EUSERS: (libc)Error Codes.
* EWOULDBLOCK: (libc)Error Codes.
* EXDEV: (libc)Error Codes.
* EXFULL: (libc)Error Codes.
* EXIT_FAILURE: (libc)Exit Status.
* EXIT_SUCCESS: (libc)Exit Status.
* EXPR_NEST_MAX: (libc)Utility Limits.
* FD_CLOEXEC: (libc)Descriptor Flags.
* FD_CLR: (libc)Waiting for I/O.
* FD_ISSET: (libc)Waiting for I/O.
* FD_SET: (libc)Waiting for I/O.
* FD_SETSIZE: (libc)Waiting for I/O.
* FD_ZERO: (libc)Waiting for I/O.
* FE_SNANS_ALWAYS_SIGNAL: (libc)Infinity and NaN.
* FILENAME_MAX: (libc)Limits for Files.
* FLUSHO: (libc)Local Modes.
* FOPEN_MAX: (libc)Opening Streams.
* FP_ILOGB0: (libc)Exponents and Logarithms.
* FP_ILOGBNAN: (libc)Exponents and Logarithms.
* FP_LLOGB0: (libc)Exponents and Logarithms.
* FP_LLOGBNAN: (libc)Exponents and Logarithms.
* F_DUPFD: (libc)Duplicating Descriptors.
* F_GETFD: (libc)Descriptor Flags.
* F_GETFL: (libc)Getting File Status Flags.
* F_GETLK: (libc)File Locks.
* F_GETOWN: (libc)Interrupt Input.
* F_OFD_GETLK: (libc)Open File Description Locks.
* F_OFD_SETLK: (libc)Open File Description Locks.
* F_OFD_SETLKW: (libc)Open File Description Locks.
* F_OK: (libc)Testing File Access.
* F_SETFD: (libc)Descriptor Flags.
* F_SETFL: (libc)Getting File Status Flags.
* F_SETLK: (libc)File Locks.
* F_SETLKW: (libc)File Locks.
* F_SETOWN: (libc)Interrupt Input.
* HUGE_VAL: (libc)Math Error Reporting.
* HUGE_VALF: (libc)Math Error Reporting.
* HUGE_VALL: (libc)Math Error Reporting.
* HUGE_VAL_FN: (libc)Math Error Reporting.
* HUGE_VAL_FNx: (libc)Math Error Reporting.
* HUPCL: (libc)Control Modes.
* I: (libc)Complex Numbers.
* ICANON: (libc)Local Modes.
* ICRNL: (libc)Input Modes.
* IEXTEN: (libc)Local Modes.
* IFNAMSIZ: (libc)Interface Naming.
* IFTODT: (libc)Directory Entries.
* IGNBRK: (libc)Input Modes.
* IGNCR: (libc)Input Modes.
* IGNPAR: (libc)Input Modes.
* IMAXBEL: (libc)Input Modes.
* INADDR_ANY: (libc)Host Address Data Type.
* INADDR_BROADCAST: (libc)Host Address Data Type.
* INADDR_LOOPBACK: (libc)Host Address Data Type.
* INADDR_NONE: (libc)Host Address Data Type.
* INFINITY: (libc)Infinity and NaN.
* INLCR: (libc)Input Modes.
* INPCK: (libc)Input Modes.
* IPPORT_RESERVED: (libc)Ports.
* IPPORT_USERRESERVED: (libc)Ports.
* ISIG: (libc)Local Modes.
* ISTRIP: (libc)Input Modes.
* IXANY: (libc)Input Modes.
* IXOFF: (libc)Input Modes.
* IXON: (libc)Input Modes.
* LINE_MAX: (libc)Utility Limits.
* LINK_MAX: (libc)Limits for Files.
* L_ctermid: (libc)Identifying the Terminal.
* L_cuserid: (libc)Who Logged In.
* L_tmpnam: (libc)Temporary Files.
* MAXNAMLEN: (libc)Limits for Files.
* MAXSYMLINKS: (libc)Symbolic Links.
* MAX_CANON: (libc)Limits for Files.
* MAX_INPUT: (libc)Limits for Files.
* MB_CUR_MAX: (libc)Selecting the Conversion.
* MB_LEN_MAX: (libc)Selecting the Conversion.
* MDMBUF: (libc)Control Modes.
* MSG_DONTROUTE: (libc)Socket Data Options.
* MSG_OOB: (libc)Socket Data Options.
* MSG_PEEK: (libc)Socket Data Options.
* NAME_MAX: (libc)Limits for Files.
* NAN: (libc)Infinity and NaN.
* NCCS: (libc)Mode Data Types.
* NGROUPS_MAX: (libc)General Limits.
* NOFLSH: (libc)Local Modes.
* NOKERNINFO: (libc)Local Modes.
* NSIG: (libc)Standard Signals.
* NULL: (libc)Null Pointer Constant.
* ONLCR: (libc)Output Modes.
* ONOEOT: (libc)Output Modes.
* OPEN_MAX: (libc)General Limits.
* OPOST: (libc)Output Modes.
* OXTABS: (libc)Output Modes.
* O_ACCMODE: (libc)Access Modes.
* O_APPEND: (libc)Operating Modes.
* O_ASYNC: (libc)Operating Modes.
* O_CREAT: (libc)Open-time Flags.
* O_DIRECTORY: (libc)Open-time Flags.
* O_EXCL: (libc)Open-time Flags.
* O_EXEC: (libc)Access Modes.
* O_EXLOCK: (libc)Open-time Flags.
* O_FSYNC: (libc)Operating Modes.
* O_IGNORE_CTTY: (libc)Open-time Flags.
* O_NDELAY: (libc)Operating Modes.
* O_NOATIME: (libc)Operating Modes.
* O_NOCTTY: (libc)Open-time Flags.
* O_NOLINK: (libc)Open-time Flags.
* O_NONBLOCK: (libc)Open-time Flags.
* O_NONBLOCK: (libc)Operating Modes.
* O_NOTRANS: (libc)Open-time Flags.
* O_RDONLY: (libc)Access Modes.
* O_RDWR: (libc)Access Modes.
* O_READ: (libc)Access Modes.
* O_SHLOCK: (libc)Open-time Flags.
* O_SYNC: (libc)Operating Modes.
* O_TMPFILE: (libc)Open-time Flags.
* O_TRUNC: (libc)Open-time Flags.
* O_WRITE: (libc)Access Modes.
* O_WRONLY: (libc)Access Modes.
* PARENB: (libc)Control Modes.
* PARMRK: (libc)Input Modes.
* PARODD: (libc)Control Modes.
* PATH_MAX: (libc)Limits for Files.
* PA_FLAG_MASK: (libc)Parsing a Template String.
* PENDIN: (libc)Local Modes.
* PF_FILE: (libc)Local Namespace Details.
* PF_INET6: (libc)Internet Namespace.
* PF_INET: (libc)Internet Namespace.
* PF_LOCAL: (libc)Local Namespace Details.
* PF_UNIX: (libc)Local Namespace Details.
* PIPE_BUF: (libc)Limits for Files.
* P_tmpdir: (libc)Temporary Files.
* RAND_MAX: (libc)ISO Random.
* RE_DUP_MAX: (libc)General Limits.
* RLIM_INFINITY: (libc)Limits on Resources.
* R_OK: (libc)Testing File Access.
* SA_NOCLDSTOP: (libc)Flags for Sigaction.
* SA_ONSTACK: (libc)Flags for Sigaction.
* SA_RESTART: (libc)Flags for Sigaction.
* SEEK_CUR: (libc)File Positioning.
* SEEK_END: (libc)File Positioning.
* SEEK_SET: (libc)File Positioning.
* SIGABRT: (libc)Program Error Signals.
* SIGALRM: (libc)Alarm Signals.
* SIGBUS: (libc)Program Error Signals.
* SIGCHLD: (libc)Job Control Signals.
* SIGCLD: (libc)Job Control Signals.
* SIGCONT: (libc)Job Control Signals.
* SIGEMT: (libc)Program Error Signals.
* SIGFPE: (libc)Program Error Signals.
* SIGHUP: (libc)Termination Signals.
* SIGILL: (libc)Program Error Signals.
* SIGINFO: (libc)Miscellaneous Signals.
* SIGINT: (libc)Termination Signals.
* SIGIO: (libc)Asynchronous I/O Signals.
* SIGIOT: (libc)Program Error Signals.
* SIGKILL: (libc)Termination Signals.
* SIGLOST: (libc)Operation Error Signals.
* SIGPIPE: (libc)Operation Error Signals.
* SIGPOLL: (libc)Asynchronous I/O Signals.
* SIGPROF: (libc)Alarm Signals.
* SIGQUIT: (libc)Termination Signals.
* SIGSEGV: (libc)Program Error Signals.
* SIGSTOP: (libc)Job Control Signals.
* SIGSYS: (libc)Program Error Signals.
* SIGTERM: (libc)Termination Signals.
* SIGTRAP: (libc)Program Error Signals.
* SIGTSTP: (libc)Job Control Signals.
* SIGTTIN: (libc)Job Control Signals.
* SIGTTOU: (libc)Job Control Signals.
* SIGURG: (libc)Asynchronous I/O Signals.
* SIGUSR1: (libc)Miscellaneous Signals.
* SIGUSR2: (libc)Miscellaneous Signals.
* SIGVTALRM: (libc)Alarm Signals.
* SIGWINCH: (libc)Miscellaneous Signals.
* SIGXCPU: (libc)Operation Error Signals.
* SIGXFSZ: (libc)Operation Error Signals.
* SIG_ERR: (libc)Basic Signal Handling.
* SNAN: (libc)Infinity and NaN.
* SNANF: (libc)Infinity and NaN.
* SNANFN: (libc)Infinity and NaN.
* SNANFNx: (libc)Infinity and NaN.
* SNANL: (libc)Infinity and NaN.
* SOCK_DGRAM: (libc)Communication Styles.
* SOCK_RAW: (libc)Communication Styles.
* SOCK_RDM: (libc)Communication Styles.
* SOCK_SEQPACKET: (libc)Communication Styles.
* SOCK_STREAM: (libc)Communication Styles.
* SOL_SOCKET: (libc)Socket-Level Options.
* SSIZE_MAX: (libc)General Limits.
* STREAM_MAX: (libc)General Limits.
* SUN_LEN: (libc)Local Namespace Details.
* S_IFMT: (libc)Testing File Type.
* S_ISBLK: (libc)Testing File Type.
* S_ISCHR: (libc)Testing File Type.
* S_ISDIR: (libc)Testing File Type.
* S_ISFIFO: (libc)Testing File Type.
* S_ISLNK: (libc)Testing File Type.
* S_ISREG: (libc)Testing File Type.
* S_ISSOCK: (libc)Testing File Type.
* S_TYPEISMQ: (libc)Testing File Type.
* S_TYPEISSEM: (libc)Testing File Type.
* S_TYPEISSHM: (libc)Testing File Type.
* TMP_MAX: (libc)Temporary Files.
* TOSTOP: (libc)Local Modes.
* TZNAME_MAX: (libc)General Limits.
* VDISCARD: (libc)Other Special.
* VDSUSP: (libc)Signal Characters.
* VEOF: (libc)Editing Characters.
* VEOL2: (libc)Editing Characters.
* VEOL: (libc)Editing Characters.
* VERASE: (libc)Editing Characters.
* VINTR: (libc)Signal Characters.
* VKILL: (libc)Editing Characters.
* VLNEXT: (libc)Other Special.
* VMIN: (libc)Noncanonical Input.
* VQUIT: (libc)Signal Characters.
* VREPRINT: (libc)Editing Characters.
* VSTART: (libc)Start/Stop Characters.
* VSTATUS: (libc)Other Special.
* VSTOP: (libc)Start/Stop Characters.
* VSUSP: (libc)Signal Characters.
* VTIME: (libc)Noncanonical Input.
* VWERASE: (libc)Editing Characters.
* WCHAR_MAX: (libc)Extended Char Intro.
* WCHAR_MIN: (libc)Extended Char Intro.
* WCOREDUMP: (libc)Process Completion Status.
* WEOF: (libc)EOF and Errors.
* WEOF: (libc)Extended Char Intro.
* WEXITSTATUS: (libc)Process Completion Status.
* WIFEXITED: (libc)Process Completion Status.
* WIFSIGNALED: (libc)Process Completion Status.
* WIFSTOPPED: (libc)Process Completion Status.
* WSTOPSIG: (libc)Process Completion Status.
* WTERMSIG: (libc)Process Completion Status.
* W_OK: (libc)Testing File Access.
* X_OK: (libc)Testing File Access.
* _Complex_I: (libc)Complex Numbers.
* _Exit: (libc)Termination Internals.
* _IOFBF: (libc)Controlling Buffering.
* _IOLBF: (libc)Controlling Buffering.
* _IONBF: (libc)Controlling Buffering.
* _Imaginary_I: (libc)Complex Numbers.
* _PATH_UTMP: (libc)Manipulating the Database.
* _PATH_WTMP: (libc)Manipulating the Database.
* _POSIX2_C_DEV: (libc)System Options.
* _POSIX2_C_VERSION: (libc)Version Supported.
* _POSIX2_FORT_DEV: (libc)System Options.
* _POSIX2_FORT_RUN: (libc)System Options.
* _POSIX2_LOCALEDEF: (libc)System Options.
* _POSIX2_SW_DEV: (libc)System Options.
* _POSIX_CHOWN_RESTRICTED: (libc)Options for Files.
* _POSIX_JOB_CONTROL: (libc)System Options.
* _POSIX_NO_TRUNC: (libc)Options for Files.
* _POSIX_SAVED_IDS: (libc)System Options.
* _POSIX_VDISABLE: (libc)Options for Files.
* _POSIX_VERSION: (libc)Version Supported.
* __fbufsize: (libc)Controlling Buffering.
* __flbf: (libc)Controlling Buffering.
* __fpending: (libc)Controlling Buffering.
* __fpurge: (libc)Flushing Buffers.
* __freadable: (libc)Opening Streams.
* __freading: (libc)Opening Streams.
* __fsetlocking: (libc)Streams and Threads.
* __fwritable: (libc)Opening Streams.
* __fwriting: (libc)Opening Streams.
* __gconv_end_fct: (libc)glibc iconv Implementation.
* __gconv_fct: (libc)glibc iconv Implementation.
* __gconv_init_fct: (libc)glibc iconv Implementation.
* __ppc_get_timebase: (libc)PowerPC.
* __ppc_get_timebase_freq: (libc)PowerPC.
* __ppc_mdoio: (libc)PowerPC.
* __ppc_mdoom: (libc)PowerPC.
* __ppc_set_ppr_low: (libc)PowerPC.
* __ppc_set_ppr_med: (libc)PowerPC.
* __ppc_set_ppr_med_high: (libc)PowerPC.
* __ppc_set_ppr_med_low: (libc)PowerPC.
* __ppc_set_ppr_very_low: (libc)PowerPC.
* __ppc_yield: (libc)PowerPC.
* __riscv_flush_icache: (libc)RISC-V.
* __va_copy: (libc)Argument Macros.
* _exit: (libc)Termination Internals.
* _flushlbf: (libc)Flushing Buffers.
* _tolower: (libc)Case Conversion.
* _toupper: (libc)Case Conversion.
* a64l: (libc)Encode Binary Data.
* abort: (libc)Aborting a Program.
* abs: (libc)Absolute Value.
* accept: (libc)Accepting Connections.
* access: (libc)Testing File Access.
* acos: (libc)Inverse Trig Functions.
* acosf: (libc)Inverse Trig Functions.
* acosfN: (libc)Inverse Trig Functions.
* acosfNx: (libc)Inverse Trig Functions.
* acosh: (libc)Hyperbolic Functions.
* acoshf: (libc)Hyperbolic Functions.
* acoshfN: (libc)Hyperbolic Functions.
* acoshfNx: (libc)Hyperbolic Functions.
* acoshl: (libc)Hyperbolic Functions.
* acosl: (libc)Inverse Trig Functions.
* addmntent: (libc)mtab.
* addseverity: (libc)Adding Severity Classes.
* adjtime: (libc)High-Resolution Calendar.
* adjtimex: (libc)High-Resolution Calendar.
* aio_cancel64: (libc)Cancel AIO Operations.
* aio_cancel: (libc)Cancel AIO Operations.
* aio_error64: (libc)Status of AIO Operations.
* aio_error: (libc)Status of AIO Operations.
* aio_fsync64: (libc)Synchronizing AIO Operations.
* aio_fsync: (libc)Synchronizing AIO Operations.
* aio_init: (libc)Configuration of AIO.
* aio_read64: (libc)Asynchronous Reads/Writes.
* aio_read: (libc)Asynchronous Reads/Writes.
* aio_return64: (libc)Status of AIO Operations.
* aio_return: (libc)Status of AIO Operations.
* aio_suspend64: (libc)Synchronizing AIO Operations.
* aio_suspend: (libc)Synchronizing AIO Operations.
* aio_write64: (libc)Asynchronous Reads/Writes.
* aio_write: (libc)Asynchronous Reads/Writes.
* alarm: (libc)Setting an Alarm.
* aligned_alloc: (libc)Aligned Memory Blocks.
* alloca: (libc)Variable Size Automatic.
* alphasort64: (libc)Scanning Directory Content.
* alphasort: (libc)Scanning Directory Content.
* argp_error: (libc)Argp Helper Functions.
* argp_failure: (libc)Argp Helper Functions.
* argp_help: (libc)Argp Help.
* argp_parse: (libc)Argp.
* argp_state_help: (libc)Argp Helper Functions.
* argp_usage: (libc)Argp Helper Functions.
* argz_add: (libc)Argz Functions.
* argz_add_sep: (libc)Argz Functions.
* argz_append: (libc)Argz Functions.
* argz_count: (libc)Argz Functions.
* argz_create: (libc)Argz Functions.
* argz_create_sep: (libc)Argz Functions.
* argz_delete: (libc)Argz Functions.
* argz_extract: (libc)Argz Functions.
* argz_insert: (libc)Argz Functions.
* argz_next: (libc)Argz Functions.
* argz_replace: (libc)Argz Functions.
* argz_stringify: (libc)Argz Functions.
* asctime: (libc)Formatting Calendar Time.
* asctime_r: (libc)Formatting Calendar Time.
* asin: (libc)Inverse Trig Functions.
* asinf: (libc)Inverse Trig Functions.
* asinfN: (libc)Inverse Trig Functions.
* asinfNx: (libc)Inverse Trig Functions.
* asinh: (libc)Hyperbolic Functions.
* asinhf: (libc)Hyperbolic Functions.
* asinhfN: (libc)Hyperbolic Functions.
* asinhfNx: (libc)Hyperbolic Functions.
* asinhl: (libc)Hyperbolic Functions.
* asinl: (libc)Inverse Trig Functions.
* asprintf: (libc)Dynamic Output.
* assert: (libc)Consistency Checking.
* assert_perror: (libc)Consistency Checking.
* atan2: (libc)Inverse Trig Functions.
* atan2f: (libc)Inverse Trig Functions.
* atan2fN: (libc)Inverse Trig Functions.
* atan2fNx: (libc)Inverse Trig Functions.
* atan2l: (libc)Inverse Trig Functions.
* atan: (libc)Inverse Trig Functions.
* atanf: (libc)Inverse Trig Functions.
* atanfN: (libc)Inverse Trig Functions.
* atanfNx: (libc)Inverse Trig Functions.
* atanh: (libc)Hyperbolic Functions.
* atanhf: (libc)Hyperbolic Functions.
* atanhfN: (libc)Hyperbolic Functions.
* atanhfNx: (libc)Hyperbolic Functions.
* atanhl: (libc)Hyperbolic Functions.
* atanl: (libc)Inverse Trig Functions.
* atexit: (libc)Cleanups on Exit.
* atof: (libc)Parsing of Floats.
* atoi: (libc)Parsing of Integers.
* atol: (libc)Parsing of Integers.
* atoll: (libc)Parsing of Integers.
* backtrace: (libc)Backtraces.
* backtrace_symbols: (libc)Backtraces.
* backtrace_symbols_fd: (libc)Backtraces.
* basename: (libc)Finding Tokens in a String.
* basename: (libc)Finding Tokens in a String.
* bcmp: (libc)String/Array Comparison.
* bcopy: (libc)Copying Strings and Arrays.
* bind: (libc)Setting Address.
* bind_textdomain_codeset: (libc)Charset conversion in gettext.
* bindtextdomain: (libc)Locating gettext catalog.
* brk: (libc)Resizing the Data Segment.
* bsearch: (libc)Array Search Function.
* btowc: (libc)Converting a Character.
* bzero: (libc)Copying Strings and Arrays.
* cabs: (libc)Absolute Value.
* cabsf: (libc)Absolute Value.
* cabsfN: (libc)Absolute Value.
* cabsfNx: (libc)Absolute Value.
* cabsl: (libc)Absolute Value.
* cacos: (libc)Inverse Trig Functions.
* cacosf: (libc)Inverse Trig Functions.
* cacosfN: (libc)Inverse Trig Functions.
* cacosfNx: (libc)Inverse Trig Functions.
* cacosh: (libc)Hyperbolic Functions.
* cacoshf: (libc)Hyperbolic Functions.
* cacoshfN: (libc)Hyperbolic Functions.
* cacoshfNx: (libc)Hyperbolic Functions.
* cacoshl: (libc)Hyperbolic Functions.
* cacosl: (libc)Inverse Trig Functions.
* call_once: (libc)Call Once.
* calloc: (libc)Allocating Cleared Space.
* canonicalize: (libc)FP Bit Twiddling.
* canonicalize_file_name: (libc)Symbolic Links.
* canonicalizef: (libc)FP Bit Twiddling.
* canonicalizefN: (libc)FP Bit Twiddling.
* canonicalizefNx: (libc)FP Bit Twiddling.
* canonicalizel: (libc)FP Bit Twiddling.
* carg: (libc)Operations on Complex.
* cargf: (libc)Operations on Complex.
* cargfN: (libc)Operations on Complex.
* cargfNx: (libc)Operations on Complex.
* cargl: (libc)Operations on Complex.
* casin: (libc)Inverse Trig Functions.
* casinf: (libc)Inverse Trig Functions.
* casinfN: (libc)Inverse Trig Functions.
* casinfNx: (libc)Inverse Trig Functions.
* casinh: (libc)Hyperbolic Functions.
* casinhf: (libc)Hyperbolic Functions.
* casinhfN: (libc)Hyperbolic Functions.
* casinhfNx: (libc)Hyperbolic Functions.
* casinhl: (libc)Hyperbolic Functions.
* casinl: (libc)Inverse Trig Functions.
* catan: (libc)Inverse Trig Functions.
* catanf: (libc)Inverse Trig Functions.
* catanfN: (libc)Inverse Trig Functions.
* catanfNx: (libc)Inverse Trig Functions.
* catanh: (libc)Hyperbolic Functions.
* catanhf: (libc)Hyperbolic Functions.
* catanhfN: (libc)Hyperbolic Functions.
* catanhfNx: (libc)Hyperbolic Functions.
* catanhl: (libc)Hyperbolic Functions.
* catanl: (libc)Inverse Trig Functions.
* catclose: (libc)The catgets Functions.
* catgets: (libc)The catgets Functions.
* catopen: (libc)The catgets Functions.
* cbrt: (libc)Exponents and Logarithms.
* cbrtf: (libc)Exponents and Logarithms.
* cbrtfN: (libc)Exponents and Logarithms.
* cbrtfNx: (libc)Exponents and Logarithms.
* cbrtl: (libc)Exponents and Logarithms.
* ccos: (libc)Trig Functions.
* ccosf: (libc)Trig Functions.
* ccosfN: (libc)Trig Functions.
* ccosfNx: (libc)Trig Functions.
* ccosh: (libc)Hyperbolic Functions.
* ccoshf: (libc)Hyperbolic Functions.
* ccoshfN: (libc)Hyperbolic Functions.
* ccoshfNx: (libc)Hyperbolic Functions.
* ccoshl: (libc)Hyperbolic Functions.
* ccosl: (libc)Trig Functions.
* ceil: (libc)Rounding Functions.
* ceilf: (libc)Rounding Functions.
* ceilfN: (libc)Rounding Functions.
* ceilfNx: (libc)Rounding Functions.
* ceill: (libc)Rounding Functions.
* cexp: (libc)Exponents and Logarithms.
* cexpf: (libc)Exponents and Logarithms.
* cexpfN: (libc)Exponents and Logarithms.
* cexpfNx: (libc)Exponents and Logarithms.
* cexpl: (libc)Exponents and Logarithms.
* cfgetispeed: (libc)Line Speed.
* cfgetospeed: (libc)Line Speed.
* cfmakeraw: (libc)Noncanonical Input.
* cfsetispeed: (libc)Line Speed.
* cfsetospeed: (libc)Line Speed.
* cfsetspeed: (libc)Line Speed.
* chdir: (libc)Working Directory.
* chmod: (libc)Setting Permissions.
* chown: (libc)File Owner.
* cimag: (libc)Operations on Complex.
* cimagf: (libc)Operations on Complex.
* cimagfN: (libc)Operations on Complex.
* cimagfNx: (libc)Operations on Complex.
* cimagl: (libc)Operations on Complex.
* clearenv: (libc)Environment Access.
* clearerr: (libc)Error Recovery.
* clearerr_unlocked: (libc)Error Recovery.
* clock: (libc)CPU Time.
* clog10: (libc)Exponents and Logarithms.
* clog10f: (libc)Exponents and Logarithms.
* clog10fN: (libc)Exponents and Logarithms.
* clog10fNx: (libc)Exponents and Logarithms.
* clog10l: (libc)Exponents and Logarithms.
* clog: (libc)Exponents and Logarithms.
* clogf: (libc)Exponents and Logarithms.
* clogfN: (libc)Exponents and Logarithms.
* clogfNx: (libc)Exponents and Logarithms.
* clogl: (libc)Exponents and Logarithms.
* close: (libc)Opening and Closing Files.
* closedir: (libc)Reading/Closing Directory.
* closelog: (libc)closelog.
* cnd_broadcast: (libc)ISO C Condition Variables.
* cnd_destroy: (libc)ISO C Condition Variables.
* cnd_init: (libc)ISO C Condition Variables.
* cnd_signal: (libc)ISO C Condition Variables.
* cnd_timedwait: (libc)ISO C Condition Variables.
* cnd_wait: (libc)ISO C Condition Variables.
* confstr: (libc)String Parameters.
* conj: (libc)Operations on Complex.
* conjf: (libc)Operations on Complex.
* conjfN: (libc)Operations on Complex.
* conjfNx: (libc)Operations on Complex.
* conjl: (libc)Operations on Complex.
* connect: (libc)Connecting.
* copy_file_range: (libc)Copying File Data.
* copysign: (libc)FP Bit Twiddling.
* copysignf: (libc)FP Bit Twiddling.
* copysignfN: (libc)FP Bit Twiddling.
* copysignfNx: (libc)FP Bit Twiddling.
* copysignl: (libc)FP Bit Twiddling.
* cos: (libc)Trig Functions.
* cosf: (libc)Trig Functions.
* cosfN: (libc)Trig Functions.
* cosfNx: (libc)Trig Functions.
* cosh: (libc)Hyperbolic Functions.
* coshf: (libc)Hyperbolic Functions.
* coshfN: (libc)Hyperbolic Functions.
* coshfNx: (libc)Hyperbolic Functions.
* coshl: (libc)Hyperbolic Functions.
* cosl: (libc)Trig Functions.
* cpow: (libc)Exponents and Logarithms.
* cpowf: (libc)Exponents and Logarithms.
* cpowfN: (libc)Exponents and Logarithms.
* cpowfNx: (libc)Exponents and Logarithms.
* cpowl: (libc)Exponents and Logarithms.
* cproj: (libc)Operations on Complex.
* cprojf: (libc)Operations on Complex.
* cprojfN: (libc)Operations on Complex.
* cprojfNx: (libc)Operations on Complex.
* cprojl: (libc)Operations on Complex.
* creal: (libc)Operations on Complex.
* crealf: (libc)Operations on Complex.
* crealfN: (libc)Operations on Complex.
* crealfNx: (libc)Operations on Complex.
* creall: (libc)Operations on Complex.
* creat64: (libc)Opening and Closing Files.
* creat: (libc)Opening and Closing Files.
* crypt: (libc)Passphrase Storage.
* crypt_r: (libc)Passphrase Storage.
* csin: (libc)Trig Functions.
* csinf: (libc)Trig Functions.
* csinfN: (libc)Trig Functions.
* csinfNx: (libc)Trig Functions.
* csinh: (libc)Hyperbolic Functions.
* csinhf: (libc)Hyperbolic Functions.
* csinhfN: (libc)Hyperbolic Functions.
* csinhfNx: (libc)Hyperbolic Functions.
* csinhl: (libc)Hyperbolic Functions.
* csinl: (libc)Trig Functions.
* csqrt: (libc)Exponents and Logarithms.
* csqrtf: (libc)Exponents and Logarithms.
* csqrtfN: (libc)Exponents and Logarithms.
* csqrtfNx: (libc)Exponents and Logarithms.
* csqrtl: (libc)Exponents and Logarithms.
* ctan: (libc)Trig Functions.
* ctanf: (libc)Trig Functions.
* ctanfN: (libc)Trig Functions.
* ctanfNx: (libc)Trig Functions.
* ctanh: (libc)Hyperbolic Functions.
* ctanhf: (libc)Hyperbolic Functions.
* ctanhfN: (libc)Hyperbolic Functions.
* ctanhfNx: (libc)Hyperbolic Functions.
* ctanhl: (libc)Hyperbolic Functions.
* ctanl: (libc)Trig Functions.
* ctermid: (libc)Identifying the Terminal.
* ctime: (libc)Formatting Calendar Time.
* ctime_r: (libc)Formatting Calendar Time.
* cuserid: (libc)Who Logged In.
* daddl: (libc)Misc FP Arithmetic.
* dcgettext: (libc)Translation with gettext.
* dcngettext: (libc)Advanced gettext functions.
* ddivl: (libc)Misc FP Arithmetic.
* dgettext: (libc)Translation with gettext.
* difftime: (libc)Elapsed Time.
* dirfd: (libc)Opening a Directory.
* dirname: (libc)Finding Tokens in a String.
* div: (libc)Integer Division.
* dmull: (libc)Misc FP Arithmetic.
* dngettext: (libc)Advanced gettext functions.
* drand48: (libc)SVID Random.
* drand48_r: (libc)SVID Random.
* drem: (libc)Remainder Functions.
* dremf: (libc)Remainder Functions.
* dreml: (libc)Remainder Functions.
* dsubl: (libc)Misc FP Arithmetic.
* dup2: (libc)Duplicating Descriptors.
* dup: (libc)Duplicating Descriptors.
* ecvt: (libc)System V Number Conversion.
* ecvt_r: (libc)System V Number Conversion.
* endfsent: (libc)fstab.
* endgrent: (libc)Scanning All Groups.
* endhostent: (libc)Host Names.
* endmntent: (libc)mtab.
* endnetent: (libc)Networks Database.
* endnetgrent: (libc)Lookup Netgroup.
* endprotoent: (libc)Protocols Database.
* endpwent: (libc)Scanning All Users.
* endservent: (libc)Services Database.
* endutent: (libc)Manipulating the Database.
* endutxent: (libc)XPG Functions.
* envz_add: (libc)Envz Functions.
* envz_entry: (libc)Envz Functions.
* envz_get: (libc)Envz Functions.
* envz_merge: (libc)Envz Functions.
* envz_remove: (libc)Envz Functions.
* envz_strip: (libc)Envz Functions.
* erand48: (libc)SVID Random.
* erand48_r: (libc)SVID Random.
* erf: (libc)Special Functions.
* erfc: (libc)Special Functions.
* erfcf: (libc)Special Functions.
* erfcfN: (libc)Special Functions.
* erfcfNx: (libc)Special Functions.
* erfcl: (libc)Special Functions.
* erff: (libc)Special Functions.
* erffN: (libc)Special Functions.
* erffNx: (libc)Special Functions.
* erfl: (libc)Special Functions.
* err: (libc)Error Messages.
* errno: (libc)Checking for Errors.
* error: (libc)Error Messages.
* error_at_line: (libc)Error Messages.
* errx: (libc)Error Messages.
* execl: (libc)Executing a File.
* execle: (libc)Executing a File.
* execlp: (libc)Executing a File.
* execv: (libc)Executing a File.
* execve: (libc)Executing a File.
* execvp: (libc)Executing a File.
* exit: (libc)Normal Termination.
* exp10: (libc)Exponents and Logarithms.
* exp10f: (libc)Exponents and Logarithms.
* exp10fN: (libc)Exponents and Logarithms.
* exp10fNx: (libc)Exponents and Logarithms.
* exp10l: (libc)Exponents and Logarithms.
* exp2: (libc)Exponents and Logarithms.
* exp2f: (libc)Exponents and Logarithms.
* exp2fN: (libc)Exponents and Logarithms.
* exp2fNx: (libc)Exponents and Logarithms.
* exp2l: (libc)Exponents and Logarithms.
* exp: (libc)Exponents and Logarithms.
* expf: (libc)Exponents and Logarithms.
* expfN: (libc)Exponents and Logarithms.
* expfNx: (libc)Exponents and Logarithms.
* expl: (libc)Exponents and Logarithms.
* explicit_bzero: (libc)Erasing Sensitive Data.
* expm1: (libc)Exponents and Logarithms.
* expm1f: (libc)Exponents and Logarithms.
* expm1fN: (libc)Exponents and Logarithms.
* expm1fNx: (libc)Exponents and Logarithms.
* expm1l: (libc)Exponents and Logarithms.
* fMaddfN: (libc)Misc FP Arithmetic.
* fMaddfNx: (libc)Misc FP Arithmetic.
* fMdivfN: (libc)Misc FP Arithmetic.
* fMdivfNx: (libc)Misc FP Arithmetic.
* fMmulfN: (libc)Misc FP Arithmetic.
* fMmulfNx: (libc)Misc FP Arithmetic.
* fMsubfN: (libc)Misc FP Arithmetic.
* fMsubfNx: (libc)Misc FP Arithmetic.
* fMxaddfN: (libc)Misc FP Arithmetic.
* fMxaddfNx: (libc)Misc FP Arithmetic.
* fMxdivfN: (libc)Misc FP Arithmetic.
* fMxdivfNx: (libc)Misc FP Arithmetic.
* fMxmulfN: (libc)Misc FP Arithmetic.
* fMxmulfNx: (libc)Misc FP Arithmetic.
* fMxsubfN: (libc)Misc FP Arithmetic.
* fMxsubfNx: (libc)Misc FP Arithmetic.
* fabs: (libc)Absolute Value.
* fabsf: (libc)Absolute Value.
* fabsfN: (libc)Absolute Value.
* fabsfNx: (libc)Absolute Value.
* fabsl: (libc)Absolute Value.
* fadd: (libc)Misc FP Arithmetic.
* faddl: (libc)Misc FP Arithmetic.
* fchdir: (libc)Working Directory.
* fchmod: (libc)Setting Permissions.
* fchown: (libc)File Owner.
* fclose: (libc)Closing Streams.
* fcloseall: (libc)Closing Streams.
* fcntl: (libc)Control Operations.
* fcvt: (libc)System V Number Conversion.
* fcvt_r: (libc)System V Number Conversion.
* fdatasync: (libc)Synchronizing I/O.
* fdim: (libc)Misc FP Arithmetic.
* fdimf: (libc)Misc FP Arithmetic.
* fdimfN: (libc)Misc FP Arithmetic.
* fdimfNx: (libc)Misc FP Arithmetic.
* fdiml: (libc)Misc FP Arithmetic.
* fdiv: (libc)Misc FP Arithmetic.
* fdivl: (libc)Misc FP Arithmetic.
* fdopen: (libc)Descriptors and Streams.
* fdopendir: (libc)Opening a Directory.
* feclearexcept: (libc)Status bit operations.
* fedisableexcept: (libc)Control Functions.
* feenableexcept: (libc)Control Functions.
* fegetenv: (libc)Control Functions.
* fegetexcept: (libc)Control Functions.
* fegetexceptflag: (libc)Status bit operations.
* fegetmode: (libc)Control Functions.
* fegetround: (libc)Rounding.
* feholdexcept: (libc)Control Functions.
* feof: (libc)EOF and Errors.
* feof_unlocked: (libc)EOF and Errors.
* feraiseexcept: (libc)Status bit operations.
* ferror: (libc)EOF and Errors.
* ferror_unlocked: (libc)EOF and Errors.
* fesetenv: (libc)Control Functions.
* fesetexcept: (libc)Status bit operations.
* fesetexceptflag: (libc)Status bit operations.
* fesetmode: (libc)Control Functions.
* fesetround: (libc)Rounding.
* fetestexcept: (libc)Status bit operations.
* fetestexceptflag: (libc)Status bit operations.
* feupdateenv: (libc)Control Functions.
* fflush: (libc)Flushing Buffers.
* fflush_unlocked: (libc)Flushing Buffers.
* fgetc: (libc)Character Input.
* fgetc_unlocked: (libc)Character Input.
* fgetgrent: (libc)Scanning All Groups.
* fgetgrent_r: (libc)Scanning All Groups.
* fgetpos64: (libc)Portable Positioning.
* fgetpos: (libc)Portable Positioning.
* fgetpwent: (libc)Scanning All Users.
* fgetpwent_r: (libc)Scanning All Users.
* fgets: (libc)Line Input.
* fgets_unlocked: (libc)Line Input.
* fgetwc: (libc)Character Input.
* fgetwc_unlocked: (libc)Character Input.
* fgetws: (libc)Line Input.
* fgetws_unlocked: (libc)Line Input.
* fileno: (libc)Descriptors and Streams.
* fileno_unlocked: (libc)Descriptors and Streams.
* finite: (libc)Floating Point Classes.
* finitef: (libc)Floating Point Classes.
* finitel: (libc)Floating Point Classes.
* flockfile: (libc)Streams and Threads.
* floor: (libc)Rounding Functions.
* floorf: (libc)Rounding Functions.
* floorfN: (libc)Rounding Functions.
* floorfNx: (libc)Rounding Functions.
* floorl: (libc)Rounding Functions.
* fma: (libc)Misc FP Arithmetic.
* fmaf: (libc)Misc FP Arithmetic.
* fmafN: (libc)Misc FP Arithmetic.
* fmafNx: (libc)Misc FP Arithmetic.
* fmal: (libc)Misc FP Arithmetic.
* fmax: (libc)Misc FP Arithmetic.
* fmaxf: (libc)Misc FP Arithmetic.
* fmaxfN: (libc)Misc FP Arithmetic.
* fmaxfNx: (libc)Misc FP Arithmetic.
* fmaxl: (libc)Misc FP Arithmetic.
* fmaxmag: (libc)Misc FP Arithmetic.
* fmaxmagf: (libc)Misc FP Arithmetic.
* fmaxmagfN: (libc)Misc FP Arithmetic.
* fmaxmagfNx: (libc)Misc FP Arithmetic.
* fmaxmagl: (libc)Misc FP Arithmetic.
* fmemopen: (libc)String Streams.
* fmin: (libc)Misc FP Arithmetic.
* fminf: (libc)Misc FP Arithmetic.
* fminfN: (libc)Misc FP Arithmetic.
* fminfNx: (libc)Misc FP Arithmetic.
* fminl: (libc)Misc FP Arithmetic.
* fminmag: (libc)Misc FP Arithmetic.
* fminmagf: (libc)Misc FP Arithmetic.
* fminmagfN: (libc)Misc FP Arithmetic.
* fminmagfNx: (libc)Misc FP Arithmetic.
* fminmagl: (libc)Misc FP Arithmetic.
* fmod: (libc)Remainder Functions.
* fmodf: (libc)Remainder Functions.
* fmodfN: (libc)Remainder Functions.
* fmodfNx: (libc)Remainder Functions.
* fmodl: (libc)Remainder Functions.
* fmtmsg: (libc)Printing Formatted Messages.
* fmul: (libc)Misc FP Arithmetic.
* fmull: (libc)Misc FP Arithmetic.
* fnmatch: (libc)Wildcard Matching.
* fopen64: (libc)Opening Streams.
* fopen: (libc)Opening Streams.
* fopencookie: (libc)Streams and Cookies.
* fork: (libc)Creating a Process.
* forkpty: (libc)Pseudo-Terminal Pairs.
* fpathconf: (libc)Pathconf.
* fpclassify: (libc)Floating Point Classes.
* fprintf: (libc)Formatted Output Functions.
* fputc: (libc)Simple Output.
* fputc_unlocked: (libc)Simple Output.
* fputs: (libc)Simple Output.
* fputs_unlocked: (libc)Simple Output.
* fputwc: (libc)Simple Output.
* fputwc_unlocked: (libc)Simple Output.
* fputws: (libc)Simple Output.
* fputws_unlocked: (libc)Simple Output.
* fread: (libc)Block Input/Output.
* fread_unlocked: (libc)Block Input/Output.
* free: (libc)Freeing after Malloc.
* freopen64: (libc)Opening Streams.
* freopen: (libc)Opening Streams.
* frexp: (libc)Normalization Functions.
* frexpf: (libc)Normalization Functions.
* frexpfN: (libc)Normalization Functions.
* frexpfNx: (libc)Normalization Functions.
* frexpl: (libc)Normalization Functions.
* fromfp: (libc)Rounding Functions.
* fromfpf: (libc)Rounding Functions.
* fromfpfN: (libc)Rounding Functions.
* fromfpfNx: (libc)Rounding Functions.
* fromfpl: (libc)Rounding Functions.
* fromfpx: (libc)Rounding Functions.
* fromfpxf: (libc)Rounding Functions.
* fromfpxfN: (libc)Rounding Functions.
* fromfpxfNx: (libc)Rounding Functions.
* fromfpxl: (libc)Rounding Functions.
* fscanf: (libc)Formatted Input Functions.
* fseek: (libc)File Positioning.
* fseeko64: (libc)File Positioning.
* fseeko: (libc)File Positioning.
* fsetpos64: (libc)Portable Positioning.
* fsetpos: (libc)Portable Positioning.
* fstat64: (libc)Reading Attributes.
* fstat: (libc)Reading Attributes.
* fsub: (libc)Misc FP Arithmetic.
* fsubl: (libc)Misc FP Arithmetic.
* fsync: (libc)Synchronizing I/O.
* ftell: (libc)File Positioning.
* ftello64: (libc)File Positioning.
* ftello: (libc)File Positioning.
* ftruncate64: (libc)File Size.
* ftruncate: (libc)File Size.
* ftrylockfile: (libc)Streams and Threads.
* ftw64: (libc)Working with Directory Trees.
* ftw: (libc)Working with Directory Trees.
* funlockfile: (libc)Streams and Threads.
* futimes: (libc)File Times.
* fwide: (libc)Streams and I18N.
* fwprintf: (libc)Formatted Output Functions.
* fwrite: (libc)Block Input/Output.
* fwrite_unlocked: (libc)Block Input/Output.
* fwscanf: (libc)Formatted Input Functions.
* gamma: (libc)Special Functions.
* gammaf: (libc)Special Functions.
* gammal: (libc)Special Functions.
* gcvt: (libc)System V Number Conversion.
* get_avphys_pages: (libc)Query Memory Parameters.
* get_current_dir_name: (libc)Working Directory.
* get_nprocs: (libc)Processor Resources.
* get_nprocs_conf: (libc)Processor Resources.
* get_phys_pages: (libc)Query Memory Parameters.
* getauxval: (libc)Auxiliary Vector.
* getc: (libc)Character Input.
* getc_unlocked: (libc)Character Input.
* getchar: (libc)Character Input.
* getchar_unlocked: (libc)Character Input.
* getcontext: (libc)System V contexts.
* getcpu: (libc)CPU Affinity.
* getcwd: (libc)Working Directory.
* getdate: (libc)General Time String Parsing.
* getdate_r: (libc)General Time String Parsing.
* getdelim: (libc)Line Input.
* getdents64: (libc)Low-level Directory Access.
* getdomainnname: (libc)Host Identification.
* getegid: (libc)Reading Persona.
* getentropy: (libc)Unpredictable Bytes.
* getenv: (libc)Environment Access.
* geteuid: (libc)Reading Persona.
* getfsent: (libc)fstab.
* getfsfile: (libc)fstab.
* getfsspec: (libc)fstab.
* getgid: (libc)Reading Persona.
* getgrent: (libc)Scanning All Groups.
* getgrent_r: (libc)Scanning All Groups.
* getgrgid: (libc)Lookup Group.
* getgrgid_r: (libc)Lookup Group.
* getgrnam: (libc)Lookup Group.
* getgrnam_r: (libc)Lookup Group.
* getgrouplist: (libc)Setting Groups.
* getgroups: (libc)Reading Persona.
* gethostbyaddr: (libc)Host Names.
* gethostbyaddr_r: (libc)Host Names.
* gethostbyname2: (libc)Host Names.
* gethostbyname2_r: (libc)Host Names.
* gethostbyname: (libc)Host Names.
* gethostbyname_r: (libc)Host Names.
* gethostent: (libc)Host Names.
* gethostid: (libc)Host Identification.
* gethostname: (libc)Host Identification.
* getitimer: (libc)Setting an Alarm.
* getline: (libc)Line Input.
* getloadavg: (libc)Processor Resources.
* getlogin: (libc)Who Logged In.
* getmntent: (libc)mtab.
* getmntent_r: (libc)mtab.
* getnetbyaddr: (libc)Networks Database.
* getnetbyname: (libc)Networks Database.
* getnetent: (libc)Networks Database.
* getnetgrent: (libc)Lookup Netgroup.
* getnetgrent_r: (libc)Lookup Netgroup.
* getopt: (libc)Using Getopt.
* getopt_long: (libc)Getopt Long Options.
* getopt_long_only: (libc)Getopt Long Options.
* getpagesize: (libc)Query Memory Parameters.
* getpass: (libc)getpass.
* getpayload: (libc)FP Bit Twiddling.
* getpayloadf: (libc)FP Bit Twiddling.
* getpayloadfN: (libc)FP Bit Twiddling.
* getpayloadfNx: (libc)FP Bit Twiddling.
* getpayloadl: (libc)FP Bit Twiddling.
* getpeername: (libc)Who is Connected.
* getpgid: (libc)Process Group Functions.
* getpgrp: (libc)Process Group Functions.
* getpid: (libc)Process Identification.
* getppid: (libc)Process Identification.
* getpriority: (libc)Traditional Scheduling Functions.
* getprotobyname: (libc)Protocols Database.
* getprotobynumber: (libc)Protocols Database.
* getprotoent: (libc)Protocols Database.
* getpt: (libc)Allocation.
* getpwent: (libc)Scanning All Users.
* getpwent_r: (libc)Scanning All Users.
* getpwnam: (libc)Lookup User.
* getpwnam_r: (libc)Lookup User.
* getpwuid: (libc)Lookup User.
* getpwuid_r: (libc)Lookup User.
* getrandom: (libc)Unpredictable Bytes.
* getrlimit64: (libc)Limits on Resources.
* getrlimit: (libc)Limits on Resources.
* getrusage: (libc)Resource Usage.
* gets: (libc)Line Input.
* getservbyname: (libc)Services Database.
* getservbyport: (libc)Services Database.
* getservent: (libc)Services Database.
* getsid: (libc)Process Group Functions.
* getsockname: (libc)Reading Address.
* getsockopt: (libc)Socket Option Functions.
* getsubopt: (libc)Suboptions.
* gettext: (libc)Translation with gettext.
* gettid: (libc)Process Identification.
* gettimeofday: (libc)High-Resolution Calendar.
* getuid: (libc)Reading Persona.
* getumask: (libc)Setting Permissions.
* getutent: (libc)Manipulating the Database.
* getutent_r: (libc)Manipulating the Database.
* getutid: (libc)Manipulating the Database.
* getutid_r: (libc)Manipulating the Database.
* getutline: (libc)Manipulating the Database.
* getutline_r: (libc)Manipulating the Database.
* getutmp: (libc)XPG Functions.
* getutmpx: (libc)XPG Functions.
* getutxent: (libc)XPG Functions.
* getutxid: (libc)XPG Functions.
* getutxline: (libc)XPG Functions.
* getw: (libc)Character Input.
* getwc: (libc)Character Input.
* getwc_unlocked: (libc)Character Input.
* getwchar: (libc)Character Input.
* getwchar_unlocked: (libc)Character Input.
* getwd: (libc)Working Directory.
* glob64: (libc)Calling Glob.
* glob: (libc)Calling Glob.
* globfree64: (libc)More Flags for Globbing.
* globfree: (libc)More Flags for Globbing.
* gmtime: (libc)Broken-down Time.
* gmtime_r: (libc)Broken-down Time.
* grantpt: (libc)Allocation.
* gsignal: (libc)Signaling Yourself.
* gtty: (libc)BSD Terminal Modes.
* hasmntopt: (libc)mtab.
* hcreate: (libc)Hash Search Function.
* hcreate_r: (libc)Hash Search Function.
* hdestroy: (libc)Hash Search Function.
* hdestroy_r: (libc)Hash Search Function.
* hsearch: (libc)Hash Search Function.
* hsearch_r: (libc)Hash Search Function.
* htonl: (libc)Byte Order.
* htons: (libc)Byte Order.
* hypot: (libc)Exponents and Logarithms.
* hypotf: (libc)Exponents and Logarithms.
* hypotfN: (libc)Exponents and Logarithms.
* hypotfNx: (libc)Exponents and Logarithms.
* hypotl: (libc)Exponents and Logarithms.
* iconv: (libc)Generic Conversion Interface.
* iconv_close: (libc)Generic Conversion Interface.
* iconv_open: (libc)Generic Conversion Interface.
* if_freenameindex: (libc)Interface Naming.
* if_indextoname: (libc)Interface Naming.
* if_nameindex: (libc)Interface Naming.
* if_nametoindex: (libc)Interface Naming.
* ilogb: (libc)Exponents and Logarithms.
* ilogbf: (libc)Exponents and Logarithms.
* ilogbfN: (libc)Exponents and Logarithms.
* ilogbfNx: (libc)Exponents and Logarithms.
* ilogbl: (libc)Exponents and Logarithms.
* imaxabs: (libc)Absolute Value.
* imaxdiv: (libc)Integer Division.
* in6addr_any: (libc)Host Address Data Type.
* in6addr_loopback: (libc)Host Address Data Type.
* index: (libc)Search Functions.
* inet_addr: (libc)Host Address Functions.
* inet_aton: (libc)Host Address Functions.
* inet_lnaof: (libc)Host Address Functions.
* inet_makeaddr: (libc)Host Address Functions.
* inet_netof: (libc)Host Address Functions.
* inet_network: (libc)Host Address Functions.
* inet_ntoa: (libc)Host Address Functions.
* inet_ntop: (libc)Host Address Functions.
* inet_pton: (libc)Host Address Functions.
* initgroups: (libc)Setting Groups.
* initstate: (libc)BSD Random.
* initstate_r: (libc)BSD Random.
* innetgr: (libc)Netgroup Membership.
* ioctl: (libc)IOCTLs.
* isalnum: (libc)Classification of Characters.
* isalpha: (libc)Classification of Characters.
* isascii: (libc)Classification of Characters.
* isatty: (libc)Is It a Terminal.
* isblank: (libc)Classification of Characters.
* iscanonical: (libc)Floating Point Classes.
* iscntrl: (libc)Classification of Characters.
* isdigit: (libc)Classification of Characters.
* iseqsig: (libc)FP Comparison Functions.
* isfinite: (libc)Floating Point Classes.
* isgraph: (libc)Classification of Characters.
* isgreater: (libc)FP Comparison Functions.
* isgreaterequal: (libc)FP Comparison Functions.
* isinf: (libc)Floating Point Classes.
* isinff: (libc)Floating Point Classes.
* isinfl: (libc)Floating Point Classes.
* isless: (libc)FP Comparison Functions.
* islessequal: (libc)FP Comparison Functions.
* islessgreater: (libc)FP Comparison Functions.
* islower: (libc)Classification of Characters.
* isnan: (libc)Floating Point Classes.
* isnan: (libc)Floating Point Classes.
* isnanf: (libc)Floating Point Classes.
* isnanl: (libc)Floating Point Classes.
* isnormal: (libc)Floating Point Classes.
* isprint: (libc)Classification of Characters.
* ispunct: (libc)Classification of Characters.
* issignaling: (libc)Floating Point Classes.
* isspace: (libc)Classification of Characters.
* issubnormal: (libc)Floating Point Classes.
* isunordered: (libc)FP Comparison Functions.
* isupper: (libc)Classification of Characters.
* iswalnum: (libc)Classification of Wide Characters.
* iswalpha: (libc)Classification of Wide Characters.
* iswblank: (libc)Classification of Wide Characters.
* iswcntrl: (libc)Classification of Wide Characters.
* iswctype: (libc)Classification of Wide Characters.
* iswdigit: (libc)Classification of Wide Characters.
* iswgraph: (libc)Classification of Wide Characters.
* iswlower: (libc)Classification of Wide Characters.
* iswprint: (libc)Classification of Wide Characters.
* iswpunct: (libc)Classification of Wide Characters.
* iswspace: (libc)Classification of Wide Characters.
* iswupper: (libc)Classification of Wide Characters.
* iswxdigit: (libc)Classification of Wide Characters.
* isxdigit: (libc)Classification of Characters.
* iszero: (libc)Floating Point Classes.
* j0: (libc)Special Functions.
* j0f: (libc)Special Functions.
* j0fN: (libc)Special Functions.
* j0fNx: (libc)Special Functions.
* j0l: (libc)Special Functions.
* j1: (libc)Special Functions.
* j1f: (libc)Special Functions.
* j1fN: (libc)Special Functions.
* j1fNx: (libc)Special Functions.
* j1l: (libc)Special Functions.
* jn: (libc)Special Functions.
* jnf: (libc)Special Functions.
* jnfN: (libc)Special Functions.
* jnfNx: (libc)Special Functions.
* jnl: (libc)Special Functions.
* jrand48: (libc)SVID Random.
* jrand48_r: (libc)SVID Random.
* kill: (libc)Signaling Another Process.
* killpg: (libc)Signaling Another Process.
* l64a: (libc)Encode Binary Data.
* labs: (libc)Absolute Value.
* lcong48: (libc)SVID Random.
* lcong48_r: (libc)SVID Random.
* ldexp: (libc)Normalization Functions.
* ldexpf: (libc)Normalization Functions.
* ldexpfN: (libc)Normalization Functions.
* ldexpfNx: (libc)Normalization Functions.
* ldexpl: (libc)Normalization Functions.
* ldiv: (libc)Integer Division.
* lfind: (libc)Array Search Function.
* lgamma: (libc)Special Functions.
* lgamma_r: (libc)Special Functions.
* lgammaf: (libc)Special Functions.
* lgammafN: (libc)Special Functions.
* lgammafN_r: (libc)Special Functions.
* lgammafNx: (libc)Special Functions.
* lgammafNx_r: (libc)Special Functions.
* lgammaf_r: (libc)Special Functions.
* lgammal: (libc)Special Functions.
* lgammal_r: (libc)Special Functions.
* link: (libc)Hard Links.
* linkat: (libc)Hard Links.
* lio_listio64: (libc)Asynchronous Reads/Writes.
* lio_listio: (libc)Asynchronous Reads/Writes.
* listen: (libc)Listening.
* llabs: (libc)Absolute Value.
* lldiv: (libc)Integer Division.
* llogb: (libc)Exponents and Logarithms.
* llogbf: (libc)Exponents and Logarithms.
* llogbfN: (libc)Exponents and Logarithms.
* llogbfNx: (libc)Exponents and Logarithms.
* llogbl: (libc)Exponents and Logarithms.
* llrint: (libc)Rounding Functions.
* llrintf: (libc)Rounding Functions.
* llrintfN: (libc)Rounding Functions.
* llrintfNx: (libc)Rounding Functions.
* llrintl: (libc)Rounding Functions.
* llround: (libc)Rounding Functions.
* llroundf: (libc)Rounding Functions.
* llroundfN: (libc)Rounding Functions.
* llroundfNx: (libc)Rounding Functions.
* llroundl: (libc)Rounding Functions.
* localeconv: (libc)The Lame Way to Locale Data.
* localtime: (libc)Broken-down Time.
* localtime_r: (libc)Broken-down Time.
* log10: (libc)Exponents and Logarithms.
* log10f: (libc)Exponents and Logarithms.
* log10fN: (libc)Exponents and Logarithms.
* log10fNx: (libc)Exponents and Logarithms.
* log10l: (libc)Exponents and Logarithms.
* log1p: (libc)Exponents and Logarithms.
* log1pf: (libc)Exponents and Logarithms.
* log1pfN: (libc)Exponents and Logarithms.
* log1pfNx: (libc)Exponents and Logarithms.
* log1pl: (libc)Exponents and Logarithms.
* log2: (libc)Exponents and Logarithms.
* log2f: (libc)Exponents and Logarithms.
* log2fN: (libc)Exponents and Logarithms.
* log2fNx: (libc)Exponents and Logarithms.
* log2l: (libc)Exponents and Logarithms.
* log: (libc)Exponents and Logarithms.
* logb: (libc)Exponents and Logarithms.
* logbf: (libc)Exponents and Logarithms.
* logbfN: (libc)Exponents and Logarithms.
* logbfNx: (libc)Exponents and Logarithms.
* logbl: (libc)Exponents and Logarithms.
* logf: (libc)Exponents and Logarithms.
* logfN: (libc)Exponents and Logarithms.
* logfNx: (libc)Exponents and Logarithms.
* login: (libc)Logging In and Out.
* login_tty: (libc)Logging In and Out.
* logl: (libc)Exponents and Logarithms.
* logout: (libc)Logging In and Out.
* logwtmp: (libc)Logging In and Out.
* longjmp: (libc)Non-Local Details.
* lrand48: (libc)SVID Random.
* lrand48_r: (libc)SVID Random.
* lrint: (libc)Rounding Functions.
* lrintf: (libc)Rounding Functions.
* lrintfN: (libc)Rounding Functions.
* lrintfNx: (libc)Rounding Functions.
* lrintl: (libc)Rounding Functions.
* lround: (libc)Rounding Functions.
* lroundf: (libc)Rounding Functions.
* lroundfN: (libc)Rounding Functions.
* lroundfNx: (libc)Rounding Functions.
* lroundl: (libc)Rounding Functions.
* lsearch: (libc)Array Search Function.
* lseek64: (libc)File Position Primitive.
* lseek: (libc)File Position Primitive.
* lstat64: (libc)Reading Attributes.
* lstat: (libc)Reading Attributes.
* lutimes: (libc)File Times.
* madvise: (libc)Memory-mapped I/O.
* makecontext: (libc)System V contexts.
* mallinfo: (libc)Statistics of Malloc.
* malloc: (libc)Basic Allocation.
* mallopt: (libc)Malloc Tunable Parameters.
* mblen: (libc)Non-reentrant Character Conversion.
* mbrlen: (libc)Converting a Character.
* mbrtowc: (libc)Converting a Character.
* mbsinit: (libc)Keeping the state.
* mbsnrtowcs: (libc)Converting Strings.
* mbsrtowcs: (libc)Converting Strings.
* mbstowcs: (libc)Non-reentrant String Conversion.
* mbtowc: (libc)Non-reentrant Character Conversion.
* mcheck: (libc)Heap Consistency Checking.
* memalign: (libc)Aligned Memory Blocks.
* memccpy: (libc)Copying Strings and Arrays.
* memchr: (libc)Search Functions.
* memcmp: (libc)String/Array Comparison.
* memcpy: (libc)Copying Strings and Arrays.
* memfd_create: (libc)Memory-mapped I/O.
* memfrob: (libc)Obfuscating Data.
* memmem: (libc)Search Functions.
* memmove: (libc)Copying Strings and Arrays.
* mempcpy: (libc)Copying Strings and Arrays.
* memrchr: (libc)Search Functions.
* memset: (libc)Copying Strings and Arrays.
* mkdir: (libc)Creating Directories.
* mkdtemp: (libc)Temporary Files.
* mkfifo: (libc)FIFO Special Files.
* mknod: (libc)Making Special Files.
* mkstemp: (libc)Temporary Files.
* mktemp: (libc)Temporary Files.
* mktime: (libc)Broken-down Time.
* mlock2: (libc)Page Lock Functions.
* mlock: (libc)Page Lock Functions.
* mlockall: (libc)Page Lock Functions.
* mmap64: (libc)Memory-mapped I/O.
* mmap: (libc)Memory-mapped I/O.
* modf: (libc)Rounding Functions.
* modff: (libc)Rounding Functions.
* modffN: (libc)Rounding Functions.
* modffNx: (libc)Rounding Functions.
* modfl: (libc)Rounding Functions.
* mount: (libc)Mount-Unmount-Remount.
* mprobe: (libc)Heap Consistency Checking.
* mprotect: (libc)Memory Protection.
* mrand48: (libc)SVID Random.
* mrand48_r: (libc)SVID Random.
* mremap: (libc)Memory-mapped I/O.
* msync: (libc)Memory-mapped I/O.
* mtrace: (libc)Tracing malloc.
* mtx_destroy: (libc)ISO C Mutexes.
* mtx_init: (libc)ISO C Mutexes.
* mtx_lock: (libc)ISO C Mutexes.
* mtx_timedlock: (libc)ISO C Mutexes.
* mtx_trylock: (libc)ISO C Mutexes.
* mtx_unlock: (libc)ISO C Mutexes.
* munlock: (libc)Page Lock Functions.
* munlockall: (libc)Page Lock Functions.
* munmap: (libc)Memory-mapped I/O.
* muntrace: (libc)Tracing malloc.
* nan: (libc)FP Bit Twiddling.
* nanf: (libc)FP Bit Twiddling.
* nanfN: (libc)FP Bit Twiddling.
* nanfNx: (libc)FP Bit Twiddling.
* nanl: (libc)FP Bit Twiddling.
* nanosleep: (libc)Sleeping.
* nearbyint: (libc)Rounding Functions.
* nearbyintf: (libc)Rounding Functions.
* nearbyintfN: (libc)Rounding Functions.
* nearbyintfNx: (libc)Rounding Functions.
* nearbyintl: (libc)Rounding Functions.
* nextafter: (libc)FP Bit Twiddling.
* nextafterf: (libc)FP Bit Twiddling.
* nextafterfN: (libc)FP Bit Twiddling.
* nextafterfNx: (libc)FP Bit Twiddling.
* nextafterl: (libc)FP Bit Twiddling.
* nextdown: (libc)FP Bit Twiddling.
* nextdownf: (libc)FP Bit Twiddling.
* nextdownfN: (libc)FP Bit Twiddling.
* nextdownfNx: (libc)FP Bit Twiddling.
* nextdownl: (libc)FP Bit Twiddling.
* nexttoward: (libc)FP Bit Twiddling.
* nexttowardf: (libc)FP Bit Twiddling.
* nexttowardl: (libc)FP Bit Twiddling.
* nextup: (libc)FP Bit Twiddling.
* nextupf: (libc)FP Bit Twiddling.
* nextupfN: (libc)FP Bit Twiddling.
* nextupfNx: (libc)FP Bit Twiddling.
* nextupl: (libc)FP Bit Twiddling.
* nftw64: (libc)Working with Directory Trees.
* nftw: (libc)Working with Directory Trees.
* ngettext: (libc)Advanced gettext functions.
* nice: (libc)Traditional Scheduling Functions.
* nl_langinfo: (libc)The Elegant and Fast Way.
* nrand48: (libc)SVID Random.
* nrand48_r: (libc)SVID Random.
* ntohl: (libc)Byte Order.
* ntohs: (libc)Byte Order.
* ntp_adjtime: (libc)High Accuracy Clock.
* ntp_gettime: (libc)High Accuracy Clock.
* obstack_1grow: (libc)Growing Objects.
* obstack_1grow_fast: (libc)Extra Fast Growing.
* obstack_alignment_mask: (libc)Obstacks Data Alignment.
* obstack_alloc: (libc)Allocation in an Obstack.
* obstack_base: (libc)Status of an Obstack.
* obstack_blank: (libc)Growing Objects.
* obstack_blank_fast: (libc)Extra Fast Growing.
* obstack_chunk_size: (libc)Obstack Chunks.
* obstack_copy0: (libc)Allocation in an Obstack.
* obstack_copy: (libc)Allocation in an Obstack.
* obstack_finish: (libc)Growing Objects.
* obstack_free: (libc)Freeing Obstack Objects.
* obstack_grow0: (libc)Growing Objects.
* obstack_grow: (libc)Growing Objects.
* obstack_init: (libc)Preparing for Obstacks.
* obstack_int_grow: (libc)Growing Objects.
* obstack_int_grow_fast: (libc)Extra Fast Growing.
* obstack_next_free: (libc)Status of an Obstack.
* obstack_object_size: (libc)Growing Objects.
* obstack_object_size: (libc)Status of an Obstack.
* obstack_printf: (libc)Dynamic Output.
* obstack_ptr_grow: (libc)Growing Objects.
* obstack_ptr_grow_fast: (libc)Extra Fast Growing.
* obstack_room: (libc)Extra Fast Growing.
* obstack_vprintf: (libc)Variable Arguments Output.
* offsetof: (libc)Structure Measurement.
* on_exit: (libc)Cleanups on Exit.
* open64: (libc)Opening and Closing Files.
* open: (libc)Opening and Closing Files.
* open_memstream: (libc)String Streams.
* opendir: (libc)Opening a Directory.
* openlog: (libc)openlog.
* openpty: (libc)Pseudo-Terminal Pairs.
* parse_printf_format: (libc)Parsing a Template String.
* pathconf: (libc)Pathconf.
* pause: (libc)Using Pause.
* pclose: (libc)Pipe to a Subprocess.
* perror: (libc)Error Messages.
* pipe: (libc)Creating a Pipe.
* pkey_alloc: (libc)Memory Protection.
* pkey_free: (libc)Memory Protection.
* pkey_get: (libc)Memory Protection.
* pkey_mprotect: (libc)Memory Protection.
* pkey_set: (libc)Memory Protection.
* popen: (libc)Pipe to a Subprocess.
* posix_fallocate64: (libc)Storage Allocation.
* posix_fallocate: (libc)Storage Allocation.
* posix_memalign: (libc)Aligned Memory Blocks.
* pow: (libc)Exponents and Logarithms.
* powf: (libc)Exponents and Logarithms.
* powfN: (libc)Exponents and Logarithms.
* powfNx: (libc)Exponents and Logarithms.
* powl: (libc)Exponents and Logarithms.
* pread64: (libc)I/O Primitives.
* pread: (libc)I/O Primitives.
* preadv2: (libc)Scatter-Gather.
* preadv64: (libc)Scatter-Gather.
* preadv64v2: (libc)Scatter-Gather.
* preadv: (libc)Scatter-Gather.
* printf: (libc)Formatted Output Functions.
* printf_size: (libc)Predefined Printf Handlers.
* printf_size_info: (libc)Predefined Printf Handlers.
* psignal: (libc)Signal Messages.
* pthread_cond_clockwait: (libc)Default Thread Attributes.
* pthread_getattr_default_np: (libc)Default Thread Attributes.
* pthread_getspecific: (libc)Thread-specific Data.
* pthread_key_create: (libc)Thread-specific Data.
* pthread_key_delete: (libc)Thread-specific Data.
* pthread_rwlock_clockrdlock: (libc)Default Thread Attributes.
* pthread_rwlock_clockwrlock: (libc)Default Thread Attributes.
* pthread_setattr_default_np: (libc)Default Thread Attributes.
* pthread_setspecific: (libc)Thread-specific Data.
* ptsname: (libc)Allocation.
* ptsname_r: (libc)Allocation.
* putc: (libc)Simple Output.
* putc_unlocked: (libc)Simple Output.
* putchar: (libc)Simple Output.
* putchar_unlocked: (libc)Simple Output.
* putenv: (libc)Environment Access.
* putpwent: (libc)Writing a User Entry.
* puts: (libc)Simple Output.
* pututline: (libc)Manipulating the Database.
* pututxline: (libc)XPG Functions.
* putw: (libc)Simple Output.
* putwc: (libc)Simple Output.
* putwc_unlocked: (libc)Simple Output.
* putwchar: (libc)Simple Output.
* putwchar_unlocked: (libc)Simple Output.
* pwrite64: (libc)I/O Primitives.
* pwrite: (libc)I/O Primitives.
* pwritev2: (libc)Scatter-Gather.
* pwritev64: (libc)Scatter-Gather.
* pwritev64v2: (libc)Scatter-Gather.
* pwritev: (libc)Scatter-Gather.
* qecvt: (libc)System V Number Conversion.
* qecvt_r: (libc)System V Number Conversion.
* qfcvt: (libc)System V Number Conversion.
* qfcvt_r: (libc)System V Number Conversion.
* qgcvt: (libc)System V Number Conversion.
* qsort: (libc)Array Sort Function.
* raise: (libc)Signaling Yourself.
* rand: (libc)ISO Random.
* rand_r: (libc)ISO Random.
* random: (libc)BSD Random.
* random_r: (libc)BSD Random.
* rawmemchr: (libc)Search Functions.
* read: (libc)I/O Primitives.
* readdir64: (libc)Reading/Closing Directory.
* readdir64_r: (libc)Reading/Closing Directory.
* readdir: (libc)Reading/Closing Directory.
* readdir_r: (libc)Reading/Closing Directory.
* readlink: (libc)Symbolic Links.
* readv: (libc)Scatter-Gather.
* realloc: (libc)Changing Block Size.
* reallocarray: (libc)Changing Block Size.
* realpath: (libc)Symbolic Links.
* recv: (libc)Receiving Data.
* recvfrom: (libc)Receiving Datagrams.
* recvmsg: (libc)Receiving Datagrams.
* regcomp: (libc)POSIX Regexp Compilation.
* regerror: (libc)Regexp Cleanup.
* regexec: (libc)Matching POSIX Regexps.
* regfree: (libc)Regexp Cleanup.
* register_printf_function: (libc)Registering New Conversions.
* remainder: (libc)Remainder Functions.
* remainderf: (libc)Remainder Functions.
* remainderfN: (libc)Remainder Functions.
* remainderfNx: (libc)Remainder Functions.
* remainderl: (libc)Remainder Functions.
* remove: (libc)Deleting Files.
* rename: (libc)Renaming Files.
* rewind: (libc)File Positioning.
* rewinddir: (libc)Random Access Directory.
* rindex: (libc)Search Functions.
* rint: (libc)Rounding Functions.
* rintf: (libc)Rounding Functions.
* rintfN: (libc)Rounding Functions.
* rintfNx: (libc)Rounding Functions.
* rintl: (libc)Rounding Functions.
* rmdir: (libc)Deleting Files.
* round: (libc)Rounding Functions.
* roundeven: (libc)Rounding Functions.
* roundevenf: (libc)Rounding Functions.
* roundevenfN: (libc)Rounding Functions.
* roundevenfNx: (libc)Rounding Functions.
* roundevenl: (libc)Rounding Functions.
* roundf: (libc)Rounding Functions.
* roundfN: (libc)Rounding Functions.
* roundfNx: (libc)Rounding Functions.
* roundl: (libc)Rounding Functions.
* rpmatch: (libc)Yes-or-No Questions.
* sbrk: (libc)Resizing the Data Segment.
* scalb: (libc)Normalization Functions.
* scalbf: (libc)Normalization Functions.
* scalbl: (libc)Normalization Functions.
* scalbln: (libc)Normalization Functions.
* scalblnf: (libc)Normalization Functions.
* scalblnfN: (libc)Normalization Functions.
* scalblnfNx: (libc)Normalization Functions.
* scalblnl: (libc)Normalization Functions.
* scalbn: (libc)Normalization Functions.
* scalbnf: (libc)Normalization Functions.
* scalbnfN: (libc)Normalization Functions.
* scalbnfNx: (libc)Normalization Functions.
* scalbnl: (libc)Normalization Functions.
* scandir64: (libc)Scanning Directory Content.
* scandir: (libc)Scanning Directory Content.
* scanf: (libc)Formatted Input Functions.
* sched_get_priority_max: (libc)Basic Scheduling Functions.
* sched_get_priority_min: (libc)Basic Scheduling Functions.
* sched_getaffinity: (libc)CPU Affinity.
* sched_getparam: (libc)Basic Scheduling Functions.
* sched_getscheduler: (libc)Basic Scheduling Functions.
* sched_rr_get_interval: (libc)Basic Scheduling Functions.
* sched_setaffinity: (libc)CPU Affinity.
* sched_setparam: (libc)Basic Scheduling Functions.
* sched_setscheduler: (libc)Basic Scheduling Functions.
* sched_yield: (libc)Basic Scheduling Functions.
* secure_getenv: (libc)Environment Access.
* seed48: (libc)SVID Random.
* seed48_r: (libc)SVID Random.
* seekdir: (libc)Random Access Directory.
* select: (libc)Waiting for I/O.
* sem_clockwait: (libc)Default Thread Attributes.
* sem_close: (libc)Semaphores.
* sem_destroy: (libc)Semaphores.
* sem_getvalue: (libc)Semaphores.
* sem_init: (libc)Semaphores.
* sem_open: (libc)Semaphores.
* sem_post: (libc)Semaphores.
* sem_timedwait: (libc)Semaphores.
* sem_trywait: (libc)Semaphores.
* sem_unlink: (libc)Semaphores.
* sem_wait: (libc)Semaphores.
* semctl: (libc)Semaphores.
* semget: (libc)Semaphores.
* semop: (libc)Semaphores.
* semtimedop: (libc)Semaphores.
* send: (libc)Sending Data.
* sendmsg: (libc)Receiving Datagrams.
* sendto: (libc)Sending Datagrams.
* setbuf: (libc)Controlling Buffering.
* setbuffer: (libc)Controlling Buffering.
* setcontext: (libc)System V contexts.
* setdomainname: (libc)Host Identification.
* setegid: (libc)Setting Groups.
* setenv: (libc)Environment Access.
* seteuid: (libc)Setting User ID.
* setfsent: (libc)fstab.
* setgid: (libc)Setting Groups.
* setgrent: (libc)Scanning All Groups.
* setgroups: (libc)Setting Groups.
* sethostent: (libc)Host Names.
* sethostid: (libc)Host Identification.
* sethostname: (libc)Host Identification.
* setitimer: (libc)Setting an Alarm.
* setjmp: (libc)Non-Local Details.
* setlinebuf: (libc)Controlling Buffering.
* setlocale: (libc)Setting the Locale.
* setlogmask: (libc)setlogmask.
* setmntent: (libc)mtab.
* setnetent: (libc)Networks Database.
* setnetgrent: (libc)Lookup Netgroup.
* setpayload: (libc)FP Bit Twiddling.
* setpayloadf: (libc)FP Bit Twiddling.
* setpayloadfN: (libc)FP Bit Twiddling.
* setpayloadfNx: (libc)FP Bit Twiddling.
* setpayloadl: (libc)FP Bit Twiddling.
* setpayloadsig: (libc)FP Bit Twiddling.
* setpayloadsigf: (libc)FP Bit Twiddling.
* setpayloadsigfN: (libc)FP Bit Twiddling.
* setpayloadsigfNx: (libc)FP Bit Twiddling.
* setpayloadsigl: (libc)FP Bit Twiddling.
* setpgid: (libc)Process Group Functions.
* setpgrp: (libc)Process Group Functions.
* setpriority: (libc)Traditional Scheduling Functions.
* setprotoent: (libc)Protocols Database.
* setpwent: (libc)Scanning All Users.
* setregid: (libc)Setting Groups.
* setreuid: (libc)Setting User ID.
* setrlimit64: (libc)Limits on Resources.
* setrlimit: (libc)Limits on Resources.
* setservent: (libc)Services Database.
* setsid: (libc)Process Group Functions.
* setsockopt: (libc)Socket Option Functions.
* setstate: (libc)BSD Random.
* setstate_r: (libc)BSD Random.
* settimeofday: (libc)High-Resolution Calendar.
* setuid: (libc)Setting User ID.
* setutent: (libc)Manipulating the Database.
* setutxent: (libc)XPG Functions.
* setvbuf: (libc)Controlling Buffering.
* shm_open: (libc)Memory-mapped I/O.
* shm_unlink: (libc)Memory-mapped I/O.
* shutdown: (libc)Closing a Socket.
* sigaction: (libc)Advanced Signal Handling.
* sigaddset: (libc)Signal Sets.
* sigaltstack: (libc)Signal Stack.
* sigblock: (libc)BSD Signal Handling.
* sigdelset: (libc)Signal Sets.
* sigemptyset: (libc)Signal Sets.
* sigfillset: (libc)Signal Sets.
* siginterrupt: (libc)BSD Signal Handling.
* sigismember: (libc)Signal Sets.
* siglongjmp: (libc)Non-Local Exits and Signals.
* sigmask: (libc)BSD Signal Handling.
* signal: (libc)Basic Signal Handling.
* signbit: (libc)FP Bit Twiddling.
* significand: (libc)Normalization Functions.
* significandf: (libc)Normalization Functions.
* significandl: (libc)Normalization Functions.
* sigpause: (libc)BSD Signal Handling.
* sigpending: (libc)Checking for Pending Signals.
* sigprocmask: (libc)Process Signal Mask.
* sigsetjmp: (libc)Non-Local Exits and Signals.
* sigsetmask: (libc)BSD Signal Handling.
* sigstack: (libc)Signal Stack.
* sigsuspend: (libc)Sigsuspend.
* sin: (libc)Trig Functions.
* sincos: (libc)Trig Functions.
* sincosf: (libc)Trig Functions.
* sincosfN: (libc)Trig Functions.
* sincosfNx: (libc)Trig Functions.
* sincosl: (libc)Trig Functions.
* sinf: (libc)Trig Functions.
* sinfN: (libc)Trig Functions.
* sinfNx: (libc)Trig Functions.
* sinh: (libc)Hyperbolic Functions.
* sinhf: (libc)Hyperbolic Functions.
* sinhfN: (libc)Hyperbolic Functions.
* sinhfNx: (libc)Hyperbolic Functions.
* sinhl: (libc)Hyperbolic Functions.
* sinl: (libc)Trig Functions.
* sleep: (libc)Sleeping.
* snprintf: (libc)Formatted Output Functions.
* socket: (libc)Creating a Socket.
* socketpair: (libc)Socket Pairs.
* sprintf: (libc)Formatted Output Functions.
* sqrt: (libc)Exponents and Logarithms.
* sqrtf: (libc)Exponents and Logarithms.
* sqrtfN: (libc)Exponents and Logarithms.
* sqrtfNx: (libc)Exponents and Logarithms.
* sqrtl: (libc)Exponents and Logarithms.
* srand48: (libc)SVID Random.
* srand48_r: (libc)SVID Random.
* srand: (libc)ISO Random.
* srandom: (libc)BSD Random.
* srandom_r: (libc)BSD Random.
* sscanf: (libc)Formatted Input Functions.
* ssignal: (libc)Basic Signal Handling.
* stat64: (libc)Reading Attributes.
* stat: (libc)Reading Attributes.
* stime: (libc)Simple Calendar Time.
* stpcpy: (libc)Copying Strings and Arrays.
* stpncpy: (libc)Truncating Strings.
* strcasecmp: (libc)String/Array Comparison.
* strcasestr: (libc)Search Functions.
* strcat: (libc)Concatenating Strings.
* strchr: (libc)Search Functions.
* strchrnul: (libc)Search Functions.
* strcmp: (libc)String/Array Comparison.
* strcoll: (libc)Collation Functions.
* strcpy: (libc)Copying Strings and Arrays.
* strcspn: (libc)Search Functions.
* strdup: (libc)Copying Strings and Arrays.
* strdupa: (libc)Copying Strings and Arrays.
* strerror: (libc)Error Messages.
* strerror_r: (libc)Error Messages.
* strfmon: (libc)Formatting Numbers.
* strfromd: (libc)Printing of Floats.
* strfromf: (libc)Printing of Floats.
* strfromfN: (libc)Printing of Floats.
* strfromfNx: (libc)Printing of Floats.
* strfroml: (libc)Printing of Floats.
* strfry: (libc)Shuffling Bytes.
* strftime: (libc)Formatting Calendar Time.
* strlen: (libc)String Length.
* strncasecmp: (libc)String/Array Comparison.
* strncat: (libc)Truncating Strings.
* strncmp: (libc)String/Array Comparison.
* strncpy: (libc)Truncating Strings.
* strndup: (libc)Truncating Strings.
* strndupa: (libc)Truncating Strings.
* strnlen: (libc)String Length.
* strpbrk: (libc)Search Functions.
* strptime: (libc)Low-Level Time String Parsing.
* strrchr: (libc)Search Functions.
* strsep: (libc)Finding Tokens in a String.
* strsignal: (libc)Signal Messages.
* strspn: (libc)Search Functions.
* strstr: (libc)Search Functions.
* strtod: (libc)Parsing of Floats.
* strtof: (libc)Parsing of Floats.
* strtofN: (libc)Parsing of Floats.
* strtofNx: (libc)Parsing of Floats.
* strtoimax: (libc)Parsing of Integers.
* strtok: (libc)Finding Tokens in a String.
* strtok_r: (libc)Finding Tokens in a String.
* strtol: (libc)Parsing of Integers.
* strtold: (libc)Parsing of Floats.
* strtoll: (libc)Parsing of Integers.
* strtoq: (libc)Parsing of Integers.
* strtoul: (libc)Parsing of Integers.
* strtoull: (libc)Parsing of Integers.
* strtoumax: (libc)Parsing of Integers.
* strtouq: (libc)Parsing of Integers.
* strverscmp: (libc)String/Array Comparison.
* strxfrm: (libc)Collation Functions.
* stty: (libc)BSD Terminal Modes.
* swapcontext: (libc)System V contexts.
* swprintf: (libc)Formatted Output Functions.
* swscanf: (libc)Formatted Input Functions.
* symlink: (libc)Symbolic Links.
* sync: (libc)Synchronizing I/O.
* syscall: (libc)System Calls.
* sysconf: (libc)Sysconf Definition.
* sysctl: (libc)System Parameters.
* syslog: (libc)syslog; vsyslog.
* system: (libc)Running a Command.
* sysv_signal: (libc)Basic Signal Handling.
* tan: (libc)Trig Functions.
* tanf: (libc)Trig Functions.
* tanfN: (libc)Trig Functions.
* tanfNx: (libc)Trig Functions.
* tanh: (libc)Hyperbolic Functions.
* tanhf: (libc)Hyperbolic Functions.
* tanhfN: (libc)Hyperbolic Functions.
* tanhfNx: (libc)Hyperbolic Functions.
* tanhl: (libc)Hyperbolic Functions.
* tanl: (libc)Trig Functions.
* tcdrain: (libc)Line Control.
* tcflow: (libc)Line Control.
* tcflush: (libc)Line Control.
* tcgetattr: (libc)Mode Functions.
* tcgetpgrp: (libc)Terminal Access Functions.
* tcgetsid: (libc)Terminal Access Functions.
* tcsendbreak: (libc)Line Control.
* tcsetattr: (libc)Mode Functions.
* tcsetpgrp: (libc)Terminal Access Functions.
* tdelete: (libc)Tree Search Function.
* tdestroy: (libc)Tree Search Function.
* telldir: (libc)Random Access Directory.
* tempnam: (libc)Temporary Files.
* textdomain: (libc)Locating gettext catalog.
* tfind: (libc)Tree Search Function.
* tgamma: (libc)Special Functions.
* tgammaf: (libc)Special Functions.
* tgammafN: (libc)Special Functions.
* tgammafNx: (libc)Special Functions.
* tgammal: (libc)Special Functions.
* tgkill: (libc)Signaling Another Process.
* thrd_create: (libc)ISO C Thread Management.
* thrd_current: (libc)ISO C Thread Management.
* thrd_detach: (libc)ISO C Thread Management.
* thrd_equal: (libc)ISO C Thread Management.
* thrd_exit: (libc)ISO C Thread Management.
* thrd_join: (libc)ISO C Thread Management.
* thrd_sleep: (libc)ISO C Thread Management.
* thrd_yield: (libc)ISO C Thread Management.
* time: (libc)Simple Calendar Time.
* timegm: (libc)Broken-down Time.
* timelocal: (libc)Broken-down Time.
* times: (libc)Processor Time.
* tmpfile64: (libc)Temporary Files.
* tmpfile: (libc)Temporary Files.
* tmpnam: (libc)Temporary Files.
* tmpnam_r: (libc)Temporary Files.
* toascii: (libc)Case Conversion.
* tolower: (libc)Case Conversion.
* totalorder: (libc)FP Comparison Functions.
* totalorderf: (libc)FP Comparison Functions.
* totalorderfN: (libc)FP Comparison Functions.
* totalorderfNx: (libc)FP Comparison Functions.
* totalorderl: (libc)FP Comparison Functions.
* totalordermag: (libc)FP Comparison Functions.
* totalordermagf: (libc)FP Comparison Functions.
* totalordermagfN: (libc)FP Comparison Functions.
* totalordermagfNx: (libc)FP Comparison Functions.
* totalordermagl: (libc)FP Comparison Functions.
* toupper: (libc)Case Conversion.
* towctrans: (libc)Wide Character Case Conversion.
* towlower: (libc)Wide Character Case Conversion.
* towupper: (libc)Wide Character Case Conversion.
* trunc: (libc)Rounding Functions.
* truncate64: (libc)File Size.
* truncate: (libc)File Size.
* truncf: (libc)Rounding Functions.
* truncfN: (libc)Rounding Functions.
* truncfNx: (libc)Rounding Functions.
* truncl: (libc)Rounding Functions.
* tsearch: (libc)Tree Search Function.
* tss_create: (libc)ISO C Thread-local Storage.
* tss_delete: (libc)ISO C Thread-local Storage.
* tss_get: (libc)ISO C Thread-local Storage.
* tss_set: (libc)ISO C Thread-local Storage.
* ttyname: (libc)Is It a Terminal.
* ttyname_r: (libc)Is It a Terminal.
* twalk: (libc)Tree Search Function.
* twalk_r: (libc)Tree Search Function.
* tzset: (libc)Time Zone Functions.
* ufromfp: (libc)Rounding Functions.
* ufromfpf: (libc)Rounding Functions.
* ufromfpfN: (libc)Rounding Functions.
* ufromfpfNx: (libc)Rounding Functions.
* ufromfpl: (libc)Rounding Functions.
* ufromfpx: (libc)Rounding Functions.
* ufromfpxf: (libc)Rounding Functions.
* ufromfpxfN: (libc)Rounding Functions.
* ufromfpxfNx: (libc)Rounding Functions.
* ufromfpxl: (libc)Rounding Functions.
* ulimit: (libc)Limits on Resources.
* umask: (libc)Setting Permissions.
* umount2: (libc)Mount-Unmount-Remount.
* umount: (libc)Mount-Unmount-Remount.
* uname: (libc)Platform Type.
* ungetc: (libc)How Unread.
* ungetwc: (libc)How Unread.
* unlink: (libc)Deleting Files.
* unlockpt: (libc)Allocation.
* unsetenv: (libc)Environment Access.
* updwtmp: (libc)Manipulating the Database.
* utime: (libc)File Times.
* utimes: (libc)File Times.
* utmpname: (libc)Manipulating the Database.
* utmpxname: (libc)XPG Functions.
* va_arg: (libc)Argument Macros.
* va_copy: (libc)Argument Macros.
* va_end: (libc)Argument Macros.
* va_start: (libc)Argument Macros.
* valloc: (libc)Aligned Memory Blocks.
* vasprintf: (libc)Variable Arguments Output.
* verr: (libc)Error Messages.
* verrx: (libc)Error Messages.
* versionsort64: (libc)Scanning Directory Content.
* versionsort: (libc)Scanning Directory Content.
* vfork: (libc)Creating a Process.
* vfprintf: (libc)Variable Arguments Output.
* vfscanf: (libc)Variable Arguments Input.
* vfwprintf: (libc)Variable Arguments Output.
* vfwscanf: (libc)Variable Arguments Input.
* vlimit: (libc)Limits on Resources.
* vprintf: (libc)Variable Arguments Output.
* vscanf: (libc)Variable Arguments Input.
* vsnprintf: (libc)Variable Arguments Output.
* vsprintf: (libc)Variable Arguments Output.
* vsscanf: (libc)Variable Arguments Input.
* vswprintf: (libc)Variable Arguments Output.
* vswscanf: (libc)Variable Arguments Input.
* vsyslog: (libc)syslog; vsyslog.
* vtimes: (libc)Resource Usage.
* vwarn: (libc)Error Messages.
* vwarnx: (libc)Error Messages.
* vwprintf: (libc)Variable Arguments Output.
* vwscanf: (libc)Variable Arguments Input.
* wait3: (libc)BSD Wait Functions.
* wait4: (libc)Process Completion.
* wait: (libc)Process Completion.
* waitpid: (libc)Process Completion.
* warn: (libc)Error Messages.
* warnx: (libc)Error Messages.
* wcpcpy: (libc)Copying Strings and Arrays.
* wcpncpy: (libc)Truncating Strings.
* wcrtomb: (libc)Converting a Character.
* wcscasecmp: (libc)String/Array Comparison.
* wcscat: (libc)Concatenating Strings.
* wcschr: (libc)Search Functions.
* wcschrnul: (libc)Search Functions.
* wcscmp: (libc)String/Array Comparison.
* wcscoll: (libc)Collation Functions.
* wcscpy: (libc)Copying Strings and Arrays.
* wcscspn: (libc)Search Functions.
* wcsdup: (libc)Copying Strings and Arrays.
* wcsftime: (libc)Formatting Calendar Time.
* wcslen: (libc)String Length.
* wcsncasecmp: (libc)String/Array Comparison.
* wcsncat: (libc)Truncating Strings.
* wcsncmp: (libc)String/Array Comparison.
* wcsncpy: (libc)Truncating Strings.
* wcsnlen: (libc)String Length.
* wcsnrtombs: (libc)Converting Strings.
* wcspbrk: (libc)Search Functions.
* wcsrchr: (libc)Search Functions.
* wcsrtombs: (libc)Converting Strings.
* wcsspn: (libc)Search Functions.
* wcsstr: (libc)Search Functions.
* wcstod: (libc)Parsing of Floats.
* wcstof: (libc)Parsing of Floats.
* wcstofN: (libc)Parsing of Floats.
* wcstofNx: (libc)Parsing of Floats.
* wcstoimax: (libc)Parsing of Integers.
* wcstok: (libc)Finding Tokens in a String.
* wcstol: (libc)Parsing of Integers.
* wcstold: (libc)Parsing of Floats.
* wcstoll: (libc)Parsing of Integers.
* wcstombs: (libc)Non-reentrant String Conversion.
* wcstoq: (libc)Parsing of Integers.
* wcstoul: (libc)Parsing of Integers.
* wcstoull: (libc)Parsing of Integers.
* wcstoumax: (libc)Parsing of Integers.
* wcstouq: (libc)Parsing of Integers.
* wcswcs: (libc)Search Functions.
* wcsxfrm: (libc)Collation Functions.
* wctob: (libc)Converting a Character.
* wctomb: (libc)Non-reentrant Character Conversion.
* wctrans: (libc)Wide Character Case Conversion.
* wctype: (libc)Classification of Wide Characters.
* wmemchr: (libc)Search Functions.
* wmemcmp: (libc)String/Array Comparison.
* wmemcpy: (libc)Copying Strings and Arrays.
* wmemmove: (libc)Copying Strings and Arrays.
* wmempcpy: (libc)Copying Strings and Arrays.
* wmemset: (libc)Copying Strings and Arrays.
* wordexp: (libc)Calling Wordexp.
* wordfree: (libc)Calling Wordexp.
* wprintf: (libc)Formatted Output Functions.
* write: (libc)I/O Primitives.
* writev: (libc)Scatter-Gather.
* wscanf: (libc)Formatted Input Functions.
* y0: (libc)Special Functions.
* y0f: (libc)Special Functions.
* y0fN: (libc)Special Functions.
* y0fNx: (libc)Special Functions.
* y0l: (libc)Special Functions.
* y1: (libc)Special Functions.
* y1f: (libc)Special Functions.
* y1fN: (libc)Special Functions.
* y1fNx: (libc)Special Functions.
* y1l: (libc)Special Functions.
* yn: (libc)Special Functions.
* ynf: (libc)Special Functions.
* ynfN: (libc)Special Functions.
* ynfNx: (libc)Special Functions.
* ynl: (libc)Special Functions.
END-INFO-DIR-ENTRY

   This file documents the GNU C Library.

   This is `The GNU C Library Reference Manual', for version 2.30
(GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)).

   Copyright (C) 1993-2019 Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version
1.3 or any later version published by the Free Software Foundation;
with the Invariant Sections being "Free Software Needs Free
Documentation" and "GNU Lesser General Public License", the Front-Cover
texts being "A GNU Manual", and with the Back-Cover Texts as in (a)
below.  A copy of the license is included in the section entitled "GNU
Free Documentation License".

   (a) The FSF's Back-Cover Text is: "You have the freedom to copy and
modify this GNU manual.  Buying copies from the FSF supports it in
developing GNU and promoting software freedom."


File: libc.info,  Node: Memory Allocation Tunables,  Next: Elision Tunables,  Prev: Tunable names,  Up: Tunables

37.2 Memory Allocation Tunables
===============================

 -- Tunable namespace: glibc.malloc
     Memory allocation behavior can be modified by setting any of the
     following tunables in the `malloc' namespace:

 -- Tunable: glibc.malloc.check
     This tunable supersedes the `MALLOC_CHECK_' environment variable
     and is identical in features.

     Setting this tunable to a non-zero value enables a special (less
     efficient) memory allocator for the malloc family of functions
     that is designed to be tolerant against simple errors such as
     double calls of free with the same argument, or overruns of a
     single byte (off-by-one bugs). Not all such errors can be
     protected against, however, and memory leaks can result.  Any
     detected heap corruption results in immediate termination of the
     process.

     Like `MALLOC_CHECK_', `glibc.malloc.check' has a problem in that it
     diverges from normal program behavior by writing to `stderr',
     which could by exploited in SUID and SGID binaries.  Therefore,
     `glibc.malloc.check' is disabled by default for SUID and SGID
     binaries.  This can be enabled again by the system administrator
     by adding a file `/etc/suid-debug'; the content of the file could
     be anything or even empty.

 -- Tunable: glibc.malloc.top_pad
     This tunable supersedes the `MALLOC_TOP_PAD_' environment variable
     and is identical in features.

     This tunable determines the amount of extra memory in bytes to
     obtain from the system when any of the arenas need to be extended.
     It also specifies the number of bytes to retain when shrinking any
     of the arenas.  This provides the necessary hysteresis in heap
     size such that excessive amounts of system calls can be avoided.

     The default value of this tunable is `0'.

 -- Tunable: glibc.malloc.perturb
     This tunable supersedes the `MALLOC_PERTURB_' environment variable
     and is identical in features.

     If set to a non-zero value, memory blocks are initialized with
     values depending on some low order bits of this tunable when they
     are allocated (except when allocated by calloc) and freed.  This
     can be used to debug the use of uninitialized or freed heap
     memory. Note that this option does not guarantee that the freed
     block will have any specific values. It only guarantees that the
     content the block had before it was freed will be overwritten.

     The default value of this tunable is `0'.

 -- Tunable: glibc.malloc.mmap_threshold
     This tunable supersedes the `MALLOC_MMAP_THRESHOLD_' environment
     variable and is identical in features.

     When this tunable is set, all chunks larger than this value in
     bytes are allocated outside the normal heap, using the `mmap'
     system call. This way it is guaranteed that the memory for these
     chunks can be returned to the system on `free'. Note that requests
     smaller than this threshold might still be allocated via `mmap'.

     If this tunable is not set, the default value is set to `131072'
     bytes and the threshold is adjusted dynamically to suit the
     allocation patterns of the program.  If the tunable is set, the
     dynamic adjustment is disabled and the value is set as static.

 -- Tunable: glibc.malloc.trim_threshold
     This tunable supersedes the `MALLOC_TRIM_THRESHOLD_' environment
     variable and is identical in features.

     The value of this tunable is the minimum size (in bytes) of the
     top-most, releasable chunk in an arena that will trigger a system
     call in order to return memory to the system from that arena.

     If this tunable is not set, the default value is set as 128 KB and
     the threshold is adjusted dynamically to suit the allocation
     patterns of the program.  If the tunable is set, the dynamic
     adjustment is disabled and the value is set as static.

 -- Tunable: glibc.malloc.mmap_max
     This tunable supersedes the `MALLOC_MMAP_MAX_' environment
     variable and is identical in features.

     The value of this tunable is maximum number of chunks to allocate
     with `mmap'.  Setting this to zero disables all use of `mmap'.

     The default value of this tunable is `65536'.

 -- Tunable: glibc.malloc.arena_test
     This tunable supersedes the `MALLOC_ARENA_TEST' environment
     variable and is identical in features.

     The `glibc.malloc.arena_test' tunable specifies the number of
     arenas that can be created before the test on the limit to the
     number of arenas is conducted.  The value is ignored if
     `glibc.malloc.arena_max' is set.

     The default value of this tunable is 2 for 32-bit systems and 8
     for 64-bit systems.

 -- Tunable: glibc.malloc.arena_max
     This tunable supersedes the `MALLOC_ARENA_MAX' environment
     variable and is identical in features.

     This tunable sets the number of arenas to use in a process
     regardless of the number of cores in the system.

     The default value of this tunable is `0', meaning that the limit
     on the number of arenas is determined by the number of CPU cores
     online.  For 32-bit systems the limit is twice the number of cores
     online and on 64-bit systems, it is 8 times the number of cores
     online.

 -- Tunable: glibc.malloc.tcache_max
     The maximum size of a request (in bytes) which may be met via the
     per-thread cache.  The default (and maximum) value is 1032 bytes on
     64-bit systems and 516 bytes on 32-bit systems.

 -- Tunable: glibc.malloc.tcache_count
     The maximum number of chunks of each size to cache. The default is
     7.  The upper limit is 65535.  If set to zero, the per-thread
     cache is effectively disabled.

     The approximate maximum overhead of the per-thread cache is thus
     equal to the number of bins times the chunk count in each bin
     times the size of each chunk.  With defaults, the approximate
     maximum overhead of the per-thread cache is approximately 236 KB
     on 64-bit systems and 118 KB on 32-bit systems.

 -- Tunable: glibc.malloc.tcache_unsorted_limit
     When the user requests memory and the request cannot be met via the
     per-thread cache, the arenas are used to meet the request.  At this
     time, additional chunks will be moved from existing arena lists to
     pre-fill the corresponding cache.  While copies from the fastbins,
     smallbins, and regular bins are bounded and predictable due to the
     bin sizes, copies from the unsorted bin are not bounded, and incur
     additional time penalties as they need to be sorted as they're
     scanned.  To make scanning the unsorted list more predictable and
     bounded, the user may set this tunable to limit the number of
     chunks that are scanned from the unsorted list while searching for
     chunks to pre-fill the per-thread cache with.  The default, or
     when set to zero, is no limit.

 -- Tunable: glibc.malloc.mxfast
     One of the optimizations malloc uses is to maintain a series of
     "fast bins" that hold chunks up to a specific size.  The default
     and maximum size which may be held this way is 80 bytes on 32-bit
     systems or 160 bytes on 64-bit systems.  Applications which value
     size over speed may choose to reduce the size of requests which
     are serviced from fast bins with this tunable.  Note that the
     value specified includes malloc's internal overhead, which is
     normally the size of one pointer, so add 4 on 32-bit systems or 8
     on 64-bit systems to the size passed to `malloc' for the largest
     bin size to enable.


File: libc.info,  Node: Elision Tunables,  Next: POSIX Thread Tunables,  Prev: Memory Allocation Tunables,  Up: Tunables

37.3 Elision Tunables
=====================

 -- Tunable namespace: glibc.elision
     Contended locks are usually slow and can lead to performance and
     scalability issues in multithread code. Lock elision will use
     memory transactions to under certain conditions, to elide locks
     and improve performance.  Elision behavior can be modified by
     setting the following tunables in the `elision' namespace:

 -- Tunable: glibc.elision.enable
     The `glibc.elision.enable' tunable enables lock elision if the
     feature is supported by the hardware.  If elision is not supported
     by the hardware this tunable has no effect.

     Elision tunables are supported for 64-bit Intel, IBM POWER, and z
     System architectures.

 -- Tunable: glibc.elision.skip_lock_busy
     The `glibc.elision.skip_lock_busy' tunable sets how many times to
     use a non-transactional lock after a transactional failure has
     occurred because the lock is already acquired.  Expressed in
     number of lock acquisition attempts.

     The default value of this tunable is `3'.

 -- Tunable: glibc.elision.skip_lock_internal_abort
     The `glibc.elision.skip_lock_internal_abort' tunable sets how many
     times the thread should avoid using elision if a transaction
     aborted for any reason other than a different thread's memory
     accesses.  Expressed in number of lock acquisition attempts.

     The default value of this tunable is `3'.

 -- Tunable: glibc.elision.skip_lock_after_retries
     The `glibc.elision.skip_lock_after_retries' tunable sets how many
     times to try to elide a lock with transactions, that only failed
     due to a different thread's memory accesses, before falling back
     to regular lock.  Expressed in number of lock elision attempts.

     This tunable is supported only on IBM POWER, and z System
     architectures.

     The default value of this tunable is `3'.

 -- Tunable: glibc.elision.tries
     The `glibc.elision.tries' sets how many times to retry elision if
     there is chance for the transaction to finish execution e.g., it
     wasn't aborted due to the lock being already acquired.  If elision
     is not supported by the hardware this tunable is set to `0' to
     avoid retries.

     The default value of this tunable is `3'.

 -- Tunable: glibc.elision.skip_trylock_internal_abort
     The `glibc.elision.skip_trylock_internal_abort' tunable sets how
     many times the thread should avoid trying the lock if a
     transaction aborted due to reasons other than a different thread's
     memory accesses.  Expressed in number of try lock attempts.

     The default value of this tunable is `3'.


File: libc.info,  Node: POSIX Thread Tunables,  Next: Hardware Capability Tunables,  Prev: Elision Tunables,  Up: Tunables

37.4 POSIX Thread Tunables
==========================

 -- Tunable namespace: glibc.pthread
     The behavior of POSIX threads can be tuned to gain performance
     improvements according to specific hardware capabilities and
     workload characteristics by setting the following tunables in the
     `pthread' namespace:

 -- Tunable: glibc.pthread.mutex_spin_count
     The `glibc.pthread.mutex_spin_count' tunable sets the maximum
     number of times a thread should spin on the lock before calling
     into the kernel to block.  Adaptive spin is used for mutexes
     initialized with the `PTHREAD_MUTEX_ADAPTIVE_NP' GNU extension.
     It affects both `pthread_mutex_lock' and `pthread_mutex_timedlock'.

     The thread spins until either the maximum spin count is reached or
     the lock is acquired.

     The default value of this tunable is `100'.


File: libc.info,  Node: Hardware Capability Tunables,  Prev: POSIX Thread Tunables,  Up: Tunables

37.5 Hardware Capability Tunables
=================================

 -- Tunable namespace: glibc.cpu
     Behavior of the GNU C Library can be tuned to assume specific
     hardware capabilities by setting the following tunables in the
     `cpu' namespace:

 -- Tunable: glibc.cpu.hwcap_mask
     This tunable supersedes the `LD_HWCAP_MASK' environment variable
     and is identical in features.

     The `AT_HWCAP' key in the Auxiliary Vector specifies instruction
     set extensions available in the processor at runtime for some
     architectures.  The `glibc.cpu.hwcap_mask' tunable allows the user
     to mask out those capabilities at runtime, thus disabling use of
     those extensions.

 -- Tunable: glibc.cpu.hwcaps
     The `glibc.cpu.hwcaps=-xxx,yyy,-zzz...' tunable allows the user to
     enable CPU/ARCH feature `yyy', disable CPU/ARCH feature `xxx' and
     `zzz' where the feature name is case-sensitive and has to match
     the ones in `sysdeps/x86/cpu-features.h'.

     This tunable is specific to i386 and x86-64.

 -- Tunable: glibc.cpu.cached_memopt
     The `glibc.cpu.cached_memopt=[0|1]' tunable allows the user to
     enable optimizations recommended for cacheable memory.  If set to
     `1', the GNU C Library assumes that the process memory image
     consists of cacheable (non-device) memory only.  The default, `0',
     indicates that the process may use device memory.

     This tunable is specific to powerpc, powerpc64 and powerpc64le.

 -- Tunable: glibc.cpu.name
     The `glibc.cpu.name=xxx' tunable allows the user to tell the GNU C
     Library to assume that the CPU is `xxx' where xxx may have one of
     these values: `generic', `falkor', `thunderxt88', `thunderx2t99',
     `thunderx2t99p1', `ares', `emag'.

     This tunable is specific to aarch64.

 -- Tunable: glibc.cpu.x86_data_cache_size
     The `glibc.cpu.x86_data_cache_size' tunable allows the user to set
     data cache size in bytes for use in memory and string routines.

     This tunable is specific to i386 and x86-64.

 -- Tunable: glibc.cpu.x86_shared_cache_size
     The `glibc.cpu.x86_shared_cache_size' tunable allows the user to
     set shared cache size in bytes for use in memory and string
     routines.

 -- Tunable: glibc.cpu.x86_non_temporal_threshold
     The `glibc.cpu.x86_non_temporal_threshold' tunable allows the user
     to set threshold in bytes for non temporal store.

     This tunable is specific to i386 and x86-64.

 -- Tunable: glibc.cpu.x86_ibt
     The `glibc.cpu.x86_ibt' tunable allows the user to control how
     indirect branch tracking (IBT) should be enabled.  Accepted values
     are `on', `off', and `permissive'.  `on' always turns on IBT
     regardless of whether IBT is enabled in the executable and its
     dependent shared libraries.  `off' always turns off IBT regardless
     of whether IBT is enabled in the executable and its dependent
     shared libraries.  `permissive' is the same as the default which
     disables IBT on non-CET executables and shared libraries.

     This tunable is specific to i386 and x86-64.

 -- Tunable: glibc.cpu.x86_shstk
     The `glibc.cpu.x86_shstk' tunable allows the user to control how
     the shadow stack (SHSTK) should be enabled.  Accepted values are
     `on', `off', and `permissive'.  `on' always turns on SHSTK
     regardless of whether SHSTK is enabled in the executable and its
     dependent shared libraries.  `off' always turns off SHSTK
     regardless of whether SHSTK is enabled in the executable and its
     dependent shared libraries.  `permissive' changes how dlopen works
     on non-CET shared libraries.  By default, when SHSTK is enabled,
     dlopening a non-CET shared library returns an error.  With
     `permissive', it turns off SHSTK instead.

     This tunable is specific to i386 and x86-64.


File: libc.info,  Node: Language Features,  Next: Library Summary,  Prev: Tunables,  Up: Top

Appendix A C Language Facilities in the Library
***********************************************

Some of the facilities implemented by the C library really should be
thought of as parts of the C language itself.  These facilities ought to
be documented in the C Language Manual, not in the library manual; but
since we don't have the language manual yet, and documentation for these
features has been written, we are publishing it here.

* Menu:

* Consistency Checking::        Using `assert' to abort if
				 something ``impossible'' happens.
* Variadic Functions::          Defining functions with varying numbers
                                 of args.
* Null Pointer Constant::       The macro `NULL'.
* Important Data Types::        Data types for object sizes.
* Data Type Measurements::      Parameters of data type representations.


File: libc.info,  Node: Consistency Checking,  Next: Variadic Functions,  Up: Language Features

A.1 Explicitly Checking Internal Consistency
============================================

When you're writing a program, it's often a good idea to put in checks
at strategic places for "impossible" errors or violations of basic
assumptions.  These kinds of checks are helpful in debugging problems
with the interfaces between different parts of the program, for example.

   The `assert' macro, defined in the header file `assert.h', provides
a convenient way to abort the program while printing a message about
where in the program the error was detected.

   Once you think your program is debugged, you can disable the error
checks performed by the `assert' macro by recompiling with the macro
`NDEBUG' defined.  This means you don't actually have to change the
program source code to disable these checks.

   But disabling these consistency checks is undesirable unless they
make the program significantly slower.  All else being equal, more error
checking is good no matter who is running the program.  A wise user
would rather have a program crash, visibly, than have it return nonsense
without indicating anything might be wrong.

 -- Macro: void assert (int EXPRESSION)
     Preliminary: | MT-Safe | AS-Unsafe heap corrupt | AC-Unsafe mem
     lock corrupt | *Note POSIX Safety Concepts::.

     Verify the programmer's belief that EXPRESSION is nonzero at this
     point in the program.

     If `NDEBUG' is not defined, `assert' tests the value of
     EXPRESSION.  If it is false (zero), `assert' aborts the program
     (*note Aborting a Program::) after printing a message of the form:

          `FILE':LINENUM: FUNCTION: Assertion `EXPRESSION' failed.

     on the standard error stream `stderr' (*note Standard Streams::).
     The filename and line number are taken from the C preprocessor
     macros `__FILE__' and `__LINE__' and specify where the call to
     `assert' was made.  When using the GNU C compiler, the name of the
     function which calls `assert' is taken from the built-in variable
     `__PRETTY_FUNCTION__'; with older compilers, the function name and
     following colon are omitted.

     If the preprocessor macro `NDEBUG' is defined before `assert.h' is
     included, the `assert' macro is defined to do absolutely nothing.

     *Warning:* Even the argument expression EXPRESSION is not
     evaluated if `NDEBUG' is in effect.  So never use `assert' with
     arguments that involve side effects.  For example, `assert (++i >
     0);' is a bad idea, because `i' will not be incremented if
     `NDEBUG' is defined.

   Sometimes the "impossible" condition you want to check for is an
error return from an operating system function.  Then it is useful to
display not only where the program crashes, but also what error was
returned.  The `assert_perror' macro makes this easy.

 -- Macro: void assert_perror (int ERRNUM)
     Preliminary: | MT-Safe | AS-Unsafe heap corrupt | AC-Unsafe mem
     lock corrupt | *Note POSIX Safety Concepts::.

     Similar to `assert', but verifies that ERRNUM is zero.

     If `NDEBUG' is not defined, `assert_perror' tests the value of
     ERRNUM.  If it is nonzero, `assert_perror' aborts the program
     after printing a message of the form:

          `FILE':LINENUM: FUNCTION: ERROR TEXT

     on the standard error stream.  The file name, line number, and
     function name are as for `assert'.  The error text is the result of
     `strerror (ERRNUM)'.  *Note Error Messages::.

     Like `assert', if `NDEBUG' is defined before `assert.h' is
     included, the `assert_perror' macro does absolutely nothing.  It
     does not evaluate the argument, so ERRNUM should not have any side
     effects.  It is best for ERRNUM to be just a simple variable
     reference; often it will be `errno'.

     This macro is a GNU extension.

   *Usage note:* The `assert' facility is designed for detecting
_internal inconsistency_; it is not suitable for reporting invalid
input or improper usage by the _user_ of the program.

   The information in the diagnostic messages printed by the `assert'
and `assert_perror' macro is intended to help you, the programmer,
track down the cause of a bug, but is not really useful for telling a
user of your program why his or her input was invalid or why a command
could not be carried out.  What's more, your program should not abort
when given invalid input, as `assert' would do--it should exit with
nonzero status (*note Exit Status::) after printing its error messages,
or perhaps read another command or move on to the next input file.

   *Note Error Messages::, for information on printing error messages
for problems that _do not_ represent bugs in the program.


File: libc.info,  Node: Variadic Functions,  Next: Null Pointer Constant,  Prev: Consistency Checking,  Up: Language Features

A.2 Variadic Functions
======================

ISO C defines a syntax for declaring a function to take a variable
number or type of arguments.  (Such functions are referred to as
"varargs functions" or "variadic functions".)  However, the language
itself provides no mechanism for such functions to access their
non-required arguments; instead, you use the variable arguments macros
defined in `stdarg.h'.

   This section describes how to declare variadic functions, how to
write them, and how to call them properly.

   *Compatibility Note:* Many older C dialects provide a similar, but
incompatible, mechanism for defining functions with variable numbers of
arguments, using `varargs.h'.

* Menu:

* Why Variadic::                Reasons for making functions take
                                 variable arguments.
* How Variadic::                How to define and call variadic functions.
* Variadic Example::            A complete example.


File: libc.info,  Node: Why Variadic,  Next: How Variadic,  Up: Variadic Functions

A.2.1 Why Variadic Functions are Used
-------------------------------------

Ordinary C functions take a fixed number of arguments.  When you define
a function, you specify the data type for each argument.  Every call to
the function should supply the expected number of arguments, with types
that can be converted to the specified ones.  Thus, if the function
`foo' is declared with `int foo (int, char *);' then you must call it
with two arguments, a number (any kind will do) and a string pointer.

   But some functions perform operations that can meaningfully accept an
unlimited number of arguments.

   In some cases a function can handle any number of values by
operating on all of them as a block.  For example, consider a function
that allocates a one-dimensional array with `malloc' to hold a
specified set of values.  This operation makes sense for any number of
values, as long as the length of the array corresponds to that number.
Without facilities for variable arguments, you would have to define a
separate function for each possible array size.

   The library function `printf' (*note Formatted Output::) is an
example of another class of function where variable arguments are
useful.  This function prints its arguments (which can vary in type as
well as number) under the control of a format template string.

   These are good reasons to define a "variadic" function which can
handle as many arguments as the caller chooses to pass.

   Some functions such as `open' take a fixed set of arguments, but
occasionally ignore the last few.  Strict adherence to ISO C requires
these functions to be defined as variadic; in practice, however, the GNU
C compiler and most other C compilers let you define such a function to
take a fixed set of arguments--the most it can ever use--and then only
_declare_ the function as variadic (or not declare its arguments at
all!).


File: libc.info,  Node: How Variadic,  Next: Variadic Example,  Prev: Why Variadic,  Up: Variadic Functions

A.2.2 How Variadic Functions are Defined and Used
-------------------------------------------------

Defining and using a variadic function involves three steps:

   * _Define_ the function as variadic, using an ellipsis (`...') in
     the argument list, and using special macros to access the variable
     arguments.  *Note Receiving Arguments::.

   * _Declare_ the function as variadic, using a prototype with an
     ellipsis (`...'), in all the files which call it.  *Note Variadic
     Prototypes::.

   * _Call_ the function by writing the fixed arguments followed by the
     additional variable arguments.  *Note Calling Variadics::.

* Menu:

* Variadic Prototypes::  How to make a prototype for a function
			  with variable arguments.
* Receiving Arguments::  Steps you must follow to access the
			  optional argument values.
* How Many Arguments::   How to decide whether there are more arguments.
* Calling Variadics::    Things you need to know about calling
			  variable arguments functions.
* Argument Macros::      Detailed specification of the macros
        		  for accessing variable arguments.


File: libc.info,  Node: Variadic Prototypes,  Next: Receiving Arguments,  Up: How Variadic

A.2.2.1 Syntax for Variable Arguments
.....................................

A function that accepts a variable number of arguments must be declared
with a prototype that says so.   You write the fixed arguments as usual,
and then tack on `...' to indicate the possibility of additional
arguments.  The syntax of ISO C requires at least one fixed argument
before the `...'.  For example,

     int
     func (const char *a, int b, ...)
     {
       ...
     }

defines a function `func' which returns an `int' and takes two required
arguments, a `const char *' and an `int'.  These are followed by any
number of anonymous arguments.

   *Portability note:* For some C compilers, the last required argument
must not be declared `register' in the function definition.
Furthermore, this argument's type must be "self-promoting": that is,
the default promotions must not change its type.  This rules out array
and function types, as well as `float', `char' (whether signed or not)
and `short int' (whether signed or not).  This is actually an ISO C
requirement.


File: libc.info,  Node: Receiving Arguments,  Next: How Many Arguments,  Prev: Variadic Prototypes,  Up: How Variadic

A.2.2.2 Receiving the Argument Values
.....................................

Ordinary fixed arguments have individual names, and you can use these
names to access their values.  But optional arguments have no
names--nothing but `...'.  How can you access them?

   The only way to access them is sequentially, in the order they were
written, and you must use special macros from `stdarg.h' in the
following three step process:

  1. You initialize an argument pointer variable of type `va_list' using
     `va_start'.  The argument pointer when initialized points to the
     first optional argument.

  2. You access the optional arguments by successive calls to `va_arg'.
     The first call to `va_arg' gives you the first optional argument,
     the next call gives you the second, and so on.

     You can stop at any time if you wish to ignore any remaining
     optional arguments.  It is perfectly all right for a function to
     access fewer arguments than were supplied in the call, but you
     will get garbage values if you try to access too many arguments.

  3. You indicate that you are finished with the argument pointer
     variable by calling `va_end'.

     (In practice, with most C compilers, calling `va_end' does nothing.
     This is always true in the GNU C compiler.  But you might as well
     call `va_end' just in case your program is someday compiled with a
     peculiar compiler.)

   *Note Argument Macros::, for the full definitions of `va_start',
`va_arg' and `va_end'.

   Steps 1 and 3 must be performed in the function that accepts the
optional arguments.  However, you can pass the `va_list' variable as an
argument to another function and perform all or part of step 2 there.

   You can perform the entire sequence of three steps multiple times
within a single function invocation.  If you want to ignore the optional
arguments, you can do these steps zero times.

   You can have more than one argument pointer variable if you like.
You can initialize each variable with `va_start' when you wish, and
then you can fetch arguments with each argument pointer as you wish.
Each argument pointer variable will sequence through the same set of
argument values, but at its own pace.

   *Portability note:* With some compilers, once you pass an argument
pointer value to a subroutine, you must not keep using the same
argument pointer value after that subroutine returns.  For full
portability, you should just pass it to `va_end'.  This is actually an
ISO C requirement, but most ANSI C compilers work happily regardless.


File: libc.info,  Node: How Many Arguments,  Next: Calling Variadics,  Prev: Receiving Arguments,  Up: How Variadic

A.2.2.3 How Many Arguments Were Supplied
........................................

There is no general way for a function to determine the number and type
of the optional arguments it was called with.  So whoever designs the
function typically designs a convention for the caller to specify the
number and type of arguments.  It is up to you to define an appropriate
calling convention for each variadic function, and write all calls
accordingly.

   One kind of calling convention is to pass the number of optional
arguments as one of the fixed arguments.  This convention works provided
all of the optional arguments are of the same type.

   A similar alternative is to have one of the required arguments be a
bit mask, with a bit for each possible purpose for which an optional
argument might be supplied.  You would test the bits in a predefined
sequence; if the bit is set, fetch the value of the next argument,
otherwise use a default value.

   A required argument can be used as a pattern to specify both the
number and types of the optional arguments.  The format string argument
to `printf' is one example of this (*note Formatted Output Functions::).

   Another possibility is to pass an "end marker" value as the last
optional argument.  For example, for a function that manipulates an
arbitrary number of pointer arguments, a null pointer might indicate the
end of the argument list.  (This assumes that a null pointer isn't
otherwise meaningful to the function.)  The `execl' function works in
just this way; see *note Executing a File::.


File: libc.info,  Node: Calling Variadics,  Next: Argument Macros,  Prev: How Many Arguments,  Up: How Variadic

A.2.2.4 Calling Variadic Functions
..................................

You don't have to do anything special to call a variadic function.
Just put the arguments (required arguments, followed by optional ones)
inside parentheses, separated by commas, as usual.  But you must declare
the function with a prototype and know how the argument values are
converted.

   In principle, functions that are _defined_ to be variadic must also
be _declared_ to be variadic using a function prototype whenever you
call them.  (*Note Variadic Prototypes::, for how.)  This is because
some C compilers use a different calling convention to pass the same set
of argument values to a function depending on whether that function
takes variable arguments or fixed arguments.

   In practice, the GNU C compiler always passes a given set of argument
types in the same way regardless of whether they are optional or
required.  So, as long as the argument types are self-promoting, you can
safely omit declaring them.  Usually it is a good idea to declare the
argument types for variadic functions, and indeed for all functions.
But there are a few functions which it is extremely convenient not to
have to declare as variadic--for example, `open' and `printf'.

   Since the prototype doesn't specify types for optional arguments, in
a call to a variadic function the "default argument promotions" are
performed on the optional argument values.  This means the objects of
type `char' or `short int' (whether signed or not) are promoted to
either `int' or `unsigned int', as appropriate; and that objects of
type `float' are promoted to type `double'.  So, if the caller passes a
`char' as an optional argument, it is promoted to an `int', and the
function can access it with `va_arg (AP, int)'.

   Conversion of the required arguments is controlled by the function
prototype in the usual way: the argument expression is converted to the
declared argument type as if it were being assigned to a variable of
that type.


File: libc.info,  Node: Argument Macros,  Prev: Calling Variadics,  Up: How Variadic

A.2.2.5 Argument Access Macros
..............................

Here are descriptions of the macros used to retrieve variable arguments.
These macros are defined in the header file `stdarg.h'.  

 -- Data Type: va_list
     The type `va_list' is used for argument pointer variables.

 -- Macro: void va_start (va_list AP, LAST-REQUIRED)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This macro initializes the argument pointer variable AP to point
     to the first of the optional arguments of the current function;
     LAST-REQUIRED must be the last required argument to the function.

 -- Macro: TYPE va_arg (va_list AP, TYPE)
     Preliminary: | MT-Safe race:ap | AS-Safe | AC-Unsafe corrupt |
     *Note POSIX Safety Concepts::.

     The `va_arg' macro returns the value of the next optional argument,
     and modifies the value of AP to point to the subsequent argument.
     Thus, successive uses of `va_arg' return successive optional
     arguments.

     The type of the value returned by `va_arg' is TYPE as specified in
     the call.  TYPE must be a self-promoting type (not `char' or
     `short int' or `float') that matches the type of the actual
     argument.

 -- Macro: void va_end (va_list AP)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This ends the use of AP.  After a `va_end' call, further `va_arg'
     calls with the same AP may not work.  You should invoke `va_end'
     before returning from the function in which `va_start' was invoked
     with the same AP argument.

     In the GNU C Library, `va_end' does nothing, and you need not ever
     use it except for reasons of portability.


   Sometimes it is necessary to parse the list of parameters more than
once or one wants to remember a certain position in the parameter list.
To do this, one will have to make a copy of the current value of the
argument.  But `va_list' is an opaque type and one cannot necessarily
assign the value of one variable of type `va_list' to another variable
of the same type.

 -- Macro: void va_copy (va_list DEST, va_list SRC)
 -- Macro: void __va_copy (va_list DEST, va_list SRC)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     The `va_copy' macro allows copying of objects of type `va_list'
     even if this is not an integral type.  The argument pointer in
     DEST is initialized to point to the same argument as the pointer
     in SRC.

     `va_copy' was added in ISO C99.  When building for strict
     conformance to ISO C90 (`gcc -std=c90'), it is not available.  GCC
     provides `__va_copy', as an extension, in any standards mode;
     before GCC 3.0, it was the only macro for this functionality.

     These macros are no longer provided by the GNU C Library, but
     rather by the compiler.

   If you want to use `va_copy' and be portable to pre-C99 systems, you
should always be prepared for the possibility that this macro will not
be available.  On architectures where a simple assignment is invalid,
hopefully `va_copy' _will_ be available, so one should always write
something like this if concerned about pre-C99 portability:

     {
       va_list ap, save;
       ...
     #ifdef va_copy
       va_copy (save, ap);
     #else
       save = ap;
     #endif
       ...
     }


File: libc.info,  Node: Variadic Example,  Prev: How Variadic,  Up: Variadic Functions

A.2.3 Example of a Variadic Function
------------------------------------

Here is a complete sample function that accepts a variable number of
arguments.  The first argument to the function is the count of remaining
arguments, which are added up and the result returned.  While trivial,
this function is sufficient to illustrate how to use the variable
arguments facility.


     #include <stdarg.h>
     #include <stdio.h>

     int
     add_em_up (int count,...)
     {
       va_list ap;
       int i, sum;

       va_start (ap, count);         /* Initialize the argument list. */

       sum = 0;
       for (i = 0; i < count; i++)
         sum += va_arg (ap, int);    /* Get the next argument value. */

       va_end (ap);                  /* Clean up. */
       return sum;
     }

     int
     main (void)
     {
       /* This call prints 16. */
       printf ("%d\n", add_em_up (3, 5, 5, 6));

       /* This call prints 55. */
       printf ("%d\n", add_em_up (10, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10));

       return 0;
     }


File: libc.info,  Node: Null Pointer Constant,  Next: Important Data Types,  Prev: Variadic Functions,  Up: Language Features

A.3 Null Pointer Constant
=========================

The null pointer constant is guaranteed not to point to any real object.
You can assign it to any pointer variable since it has type `void *'.
The preferred way to write a null pointer constant is with `NULL'.

 -- Macro: void * NULL
     This is a null pointer constant.

   You can also use `0' or `(void *)0' as a null pointer constant, but
using `NULL' is cleaner because it makes the purpose of the constant
more evident.

   If you use the null pointer constant as a function argument, then for
complete portability you should make sure that the function has a
prototype declaration.  Otherwise, if the target machine has two
different pointer representations, the compiler won't know which
representation to use for that argument.  You can avoid the problem by
explicitly casting the constant to the proper pointer type, but we
recommend instead adding a prototype for the function you are calling.


File: libc.info,  Node: Important Data Types,  Next: Data Type Measurements,  Prev: Null Pointer Constant,  Up: Language Features

A.4 Important Data Types
========================

The result of subtracting two pointers in C is always an integer, but
the precise data type varies from C compiler to C compiler.  Likewise,
the data type of the result of `sizeof' also varies between compilers.
ISO C defines standard aliases for these two types, so you can refer to
them in a portable fashion.  They are defined in the header file
`stddef.h'.  

 -- Data Type: ptrdiff_t
     This is the signed integer type of the result of subtracting two
     pointers.  For example, with the declaration `char *p1, *p2;', the
     expression `p2 - p1' is of type `ptrdiff_t'.  This will probably
     be one of the standard signed integer types (`short int', `int' or
     `long int'), but might be a nonstandard type that exists only for
     this purpose.

 -- Data Type: size_t
     This is an unsigned integer type used to represent the sizes of
     objects.  The result of the `sizeof' operator is of this type, and
     functions such as `malloc' (*note Unconstrained Allocation::) and
     `memcpy' (*note Copying Strings and Arrays::) accept arguments of
     this type to specify object sizes.  On systems using the GNU C
     Library, this will be `unsigned int' or `unsigned long int'.

     *Usage Note:* `size_t' is the preferred way to declare any
     arguments or variables that hold the size of an object.

   *Compatibility Note:* Implementations of C before the advent of
ISO C generally used `unsigned int' for representing object sizes and
`int' for pointer subtraction results.  They did not necessarily define
either `size_t' or `ptrdiff_t'.  Unix systems did define `size_t', in
`sys/types.h', but the definition was usually a signed type.


File: libc.info,  Node: Data Type Measurements,  Prev: Important Data Types,  Up: Language Features

A.5 Data Type Measurements
==========================

Most of the time, if you choose the proper C data type for each object
in your program, you need not be concerned with just how it is
represented or how many bits it uses.  When you do need such
information, the C language itself does not provide a way to get it.
The header files `limits.h' and `float.h' contain macros which give you
this information in full detail.

* Menu:

* Width of Type::           How many bits does an integer type hold?
* Range of Type::           What are the largest and smallest values
			     that an integer type can hold?
* Floating Type Macros::    Parameters that measure the floating point types.
* Structure Measurement::   Getting measurements on structure types.


File: libc.info,  Node: Width of Type,  Next: Range of Type,  Up: Data Type Measurements

A.5.1 Width of an Integer Type
------------------------------

TS 18661-1:2014 defines macros for the width of integer types (the
number of value and sign bits).  One benefit of these macros is they
can be used in `#if' preprocessor directives, whereas `sizeof' cannot.
The following macros are defined in `limits.h'.

`CHAR_WIDTH'
`SCHAR_WIDTH'
`UCHAR_WIDTH'
`SHRT_WIDTH'
`USHRT_WIDTH'
`INT_WIDTH'
`UINT_WIDTH'
`LONG_WIDTH'
`ULONG_WIDTH'
`LLONG_WIDTH'
`ULLONG_WIDTH'
     These are the widths of the types `char', `signed char', `unsigned
     char', `short int', `unsigned short int', `int', `unsigned int',
     `long int', `unsigned long int', `long long int' and `unsigned
     long long int', respectively.

   Further such macros are defined in `stdint.h'.  Apart from those for
types specified by width (*note Integers::), the following are defined:

`INTPTR_WIDTH'
`UINTPTR_WIDTH'
`PTRDIFF_WIDTH'
`SIG_ATOMIC_WIDTH'
`SIZE_WIDTH'
`WCHAR_WIDTH'
`WINT_WIDTH'
     These are the widths of the types `intptr_t', `uintptr_t',
     `ptrdiff_t', `sig_atomic_t', `size_t', `wchar_t' and `wint_t',
     respectively.

   A common reason that a program needs to know how many bits are in an
integer type is for using an array of `unsigned long int' as a bit
vector.  You can access the bit at index N with:

     vector[N / ULONG_WIDTH] & (1UL << (N % ULONG_WIDTH))

   Before `ULONG_WIDTH' was a part of the C language, `CHAR_BIT' was
used to compute the number of bits in an integer data type.

 -- Macro: int CHAR_BIT
     This is the number of bits in a `char'.  POSIX.1-2001 requires
     this to be 8.

   The number of bits in any data type TYPE can be computed like this:

     sizeof (TYPE) * CHAR_BIT

   That expression includes padding bits as well as value and sign bits.
On all systems supported by the GNU C Library, standard integer types
other than `_Bool' do not have any padding bits.

   *Portability Note:* One cannot actually easily compute the number of
usable bits in a portable manner.


File: libc.info,  Node: Range of Type,  Next: Floating Type Macros,  Prev: Width of Type,  Up: Data Type Measurements

A.5.2 Range of an Integer Type
------------------------------

Suppose you need to store an integer value which can range from zero to
one million.  Which is the smallest type you can use?  There is no
general rule; it depends on the C compiler and target machine.  You can
use the `MIN' and `MAX' macros in `limits.h' to determine which type
will work.

   Each signed integer type has a pair of macros which give the smallest
and largest values that it can hold.  Each unsigned integer type has one
such macro, for the maximum value; the minimum value is, of course,
zero.

   The values of these macros are all integer constant expressions.  The
`MAX' and `MIN' macros for `char' and `short int' types have values of
type `int'.  The `MAX' and `MIN' macros for the other types have values
of the same type described by the macro--thus, `ULONG_MAX' has type
`unsigned long int'.

`SCHAR_MIN'
     This is the minimum value that can be represented by a
     `signed char'.

`SCHAR_MAX'
`UCHAR_MAX'
     These are the maximum values that can be represented by a
     `signed char' and `unsigned char', respectively.

`CHAR_MIN'
     This is the minimum value that can be represented by a `char'.
     It's equal to `SCHAR_MIN' if `char' is signed, or zero otherwise.

`CHAR_MAX'
     This is the maximum value that can be represented by a `char'.
     It's equal to `SCHAR_MAX' if `char' is signed, or `UCHAR_MAX'
     otherwise.

`SHRT_MIN'
     This is the minimum value that can be represented by a
     `signed short int'.  On most machines that the GNU C Library runs
     on, `short' integers are 16-bit quantities.

`SHRT_MAX'
`USHRT_MAX'
     These are the maximum values that can be represented by a
     `signed short int' and `unsigned short int', respectively.

`INT_MIN'
     This is the minimum value that can be represented by a
     `signed int'.  On most machines that the GNU C Library runs on, an
     `int' is a 32-bit quantity.

`INT_MAX'
`UINT_MAX'
     These are the maximum values that can be represented by,
     respectively, the type `signed int' and the type `unsigned int'.

`LONG_MIN'
     This is the minimum value that can be represented by a
     `signed long int'.  On most machines that the GNU C Library runs
     on, `long' integers are 32-bit quantities, the same size as `int'.

`LONG_MAX'
`ULONG_MAX'
     These are the maximum values that can be represented by a
     `signed long int' and `unsigned long int', respectively.

`LLONG_MIN'
     This is the minimum value that can be represented by a
     `signed long long int'.  On most machines that the GNU C Library
     runs on, `long long' integers are 64-bit quantities.

`LLONG_MAX'
`ULLONG_MAX'
     These are the maximum values that can be represented by a `signed
     long long int' and `unsigned long long int', respectively.

`LONG_LONG_MIN'
`LONG_LONG_MAX'
`ULONG_LONG_MAX'
     These are obsolete names for `LLONG_MIN', `LLONG_MAX', and
     `ULLONG_MAX'.  They are only available if `_GNU_SOURCE' is defined
     (*note Feature Test Macros::).  In GCC versions prior to 3.0,
     these were the only names available.

`WCHAR_MAX'
     This is the maximum value that can be represented by a `wchar_t'.
     *Note Extended Char Intro::.

   The header file `limits.h' also defines some additional constants
that parameterize various operating system and file system limits.
These constants are described in *note System Configuration::.


File: libc.info,  Node: Floating Type Macros,  Next: Structure Measurement,  Prev: Range of Type,  Up: Data Type Measurements

A.5.3 Floating Type Macros
--------------------------

The specific representation of floating point numbers varies from
machine to machine.  Because floating point numbers are represented
internally as approximate quantities, algorithms for manipulating
floating point data often need to take account of the precise details of
the machine's floating point representation.

   Some of the functions in the C library itself need this information;
for example, the algorithms for printing and reading floating point
numbers (*note I/O on Streams::) and for calculating trigonometric and
irrational functions (*note Mathematics::) use it to avoid round-off
error and loss of accuracy.  User programs that implement numerical
analysis techniques also often need this information in order to
minimize or compute error bounds.

   The header file `float.h' describes the format used by your machine.

* Menu:

* Floating Point Concepts::     Definitions of terminology.
* Floating Point Parameters::   Details of specific macros.
* IEEE Floating Point::         The measurements for one common
                                 representation.


File: libc.info,  Node: Floating Point Concepts,  Next: Floating Point Parameters,  Up: Floating Type Macros

A.5.3.1 Floating Point Representation Concepts
..............................................

This section introduces the terminology for describing floating point
representations.

   You are probably already familiar with most of these concepts in
terms of scientific or exponential notation for floating point numbers.
For example, the number `123456.0' could be expressed in exponential
notation as `1.23456e+05', a shorthand notation indicating that the
mantissa `1.23456' is multiplied by the base `10' raised to power `5'.

   More formally, the internal representation of a floating point number
can be characterized in terms of the following parameters:

   * The "sign" is either `-1' or `1'.

   * The "base" or "radix" for exponentiation, an integer greater than
     `1'.  This is a constant for a particular representation.

   * The "exponent" to which the base is raised.  The upper and lower
     bounds of the exponent value are constants for a particular
     representation.

     Sometimes, in the actual bits representing the floating point
     number, the exponent is "biased" by adding a constant to it, to
     make it always be represented as an unsigned quantity.  This is
     only important if you have some reason to pick apart the bit
     fields making up the floating point number by hand, which is
     something for which the GNU C Library provides no support.  So
     this is ignored in the discussion that follows.

   * The "mantissa" or "significand" is an unsigned integer which is a
     part of each floating point number.

   * The "precision" of the mantissa.  If the base of the representation
     is B, then the precision is the number of base-B digits in the
     mantissa.  This is a constant for a particular representation.

     Many floating point representations have an implicit "hidden bit"
     in the mantissa.  This is a bit which is present virtually in the
     mantissa, but not stored in memory because its value is always 1
     in a normalized number.  The precision figure (see above) includes
     any hidden bits.

     Again, the GNU C Library provides no facilities for dealing with
     such low-level aspects of the representation.

   The mantissa of a floating point number represents an implicit
fraction whose denominator is the base raised to the power of the
precision.  Since the largest representable mantissa is one less than
this denominator, the value of the fraction is always strictly less
than `1'.  The mathematical value of a floating point number is then
the product of this fraction, the sign, and the base raised to the
exponent.

   We say that the floating point number is "normalized" if the
fraction is at least `1/B', where B is the base.  In other words, the
mantissa would be too large to fit if it were multiplied by the base.
Non-normalized numbers are sometimes called "denormal"; they contain
less precision than the representation normally can hold.

   If the number is not normalized, then you can subtract `1' from the
exponent while multiplying the mantissa by the base, and get another
floating point number with the same value.  "Normalization" consists of
doing this repeatedly until the number is normalized.  Two distinct
normalized floating point numbers cannot be equal in value.

   (There is an exception to this rule: if the mantissa is zero, it is
considered normalized.  Another exception happens on certain machines
where the exponent is as small as the representation can hold.  Then it
is impossible to subtract `1' from the exponent, so a number may be
normalized even if its fraction is less than `1/B'.)


File: libc.info,  Node: Floating Point Parameters,  Next: IEEE Floating Point,  Prev: Floating Point Concepts,  Up: Floating Type Macros

A.5.3.2 Floating Point Parameters
.................................

These macro definitions can be accessed by including the header file
`float.h' in your program.

   Macro names starting with `FLT_' refer to the `float' type, while
names beginning with `DBL_' refer to the `double' type and names
beginning with `LDBL_' refer to the `long double' type.  (If GCC does
not support `long double' as a distinct data type on a target machine
then the values for the `LDBL_' constants are equal to the
corresponding constants for the `double' type.)

   Of these macros, only `FLT_RADIX' is guaranteed to be a constant
expression.  The other macros listed here cannot be reliably used in
places that require constant expressions, such as `#if' preprocessing
directives or in the dimensions of static arrays.

   Although the ISO C standard specifies minimum and maximum values for
most of these parameters, the GNU C implementation uses whatever values
describe the floating point representation of the target machine.  So in
principle GNU C actually satisfies the ISO C requirements only if the
target machine is suitable.  In practice, all the machines currently
supported are suitable.

`FLT_ROUNDS'
     This value characterizes the rounding mode for floating point
     addition.  The following values indicate standard rounding modes:

    `-1'
          The mode is indeterminable.

    `0'
          Rounding is towards zero.

    `1'
          Rounding is to the nearest number.

    `2'
          Rounding is towards positive infinity.

    `3'
          Rounding is towards negative infinity.

     Any other value represents a machine-dependent nonstandard rounding
     mode.

     On most machines, the value is `1', in accordance with the IEEE
     standard for floating point.

     Here is a table showing how certain values round for each possible
     value of `FLT_ROUNDS', if the other aspects of the representation
     match the IEEE single-precision standard.

                          0      1             2             3
           1.00000003    1.0    1.0           1.00000012    1.0
           1.00000007    1.0    1.00000012    1.00000012    1.0
          -1.00000003   -1.0   -1.0          -1.0          -1.00000012
          -1.00000007   -1.0   -1.00000012   -1.0          -1.00000012

`FLT_RADIX'
     This is the value of the base, or radix, of the exponent
     representation.  This is guaranteed to be a constant expression,
     unlike the other macros described in this section.  The value is 2
     on all machines we know of except the IBM 360 and derivatives.

`FLT_MANT_DIG'
     This is the number of base-`FLT_RADIX' digits in the floating point
     mantissa for the `float' data type.  The following expression
     yields `1.0' (even though mathematically it should not) due to the
     limited number of mantissa digits:

          float radix = FLT_RADIX;

          1.0f + 1.0f / radix / radix / ... / radix

     where `radix' appears `FLT_MANT_DIG' times.

`DBL_MANT_DIG'
`LDBL_MANT_DIG'
     This is the number of base-`FLT_RADIX' digits in the floating point
     mantissa for the data types `double' and `long double',
     respectively.

`FLT_DIG'
     This is the number of decimal digits of precision for the `float'
     data type.  Technically, if P and B are the precision and base
     (respectively) for the representation, then the decimal precision
     Q is the maximum number of decimal digits such that any floating
     point number with Q base 10 digits can be rounded to a floating
     point number with P base B digits and back again, without change
     to the Q decimal digits.

     The value of this macro is supposed to be at least `6', to satisfy
     ISO C.

`DBL_DIG'
`LDBL_DIG'
     These are similar to `FLT_DIG', but for the data types `double'
     and `long double', respectively.  The values of these macros are
     supposed to be at least `10'.

`FLT_MIN_EXP'
     This is the smallest possible exponent value for type `float'.
     More precisely, it is the minimum negative integer such that the
     value `FLT_RADIX' raised to this power minus 1 can be represented
     as a normalized floating point number of type `float'.

`DBL_MIN_EXP'
`LDBL_MIN_EXP'
     These are similar to `FLT_MIN_EXP', but for the data types
     `double' and `long double', respectively.

`FLT_MIN_10_EXP'
     This is the minimum negative integer such that `10' raised to this
     power minus 1 can be represented as a normalized floating point
     number of type `float'.  This is supposed to be `-37' or even less.

`DBL_MIN_10_EXP'
`LDBL_MIN_10_EXP'
     These are similar to `FLT_MIN_10_EXP', but for the data types
     `double' and `long double', respectively.

`FLT_MAX_EXP'
     This is the largest possible exponent value for type `float'.  More
     precisely, this is the maximum positive integer such that value
     `FLT_RADIX' raised to this power minus 1 can be represented as a
     floating point number of type `float'.

`DBL_MAX_EXP'
`LDBL_MAX_EXP'
     These are similar to `FLT_MAX_EXP', but for the data types
     `double' and `long double', respectively.

`FLT_MAX_10_EXP'
     This is the maximum positive integer such that `10' raised to this
     power minus 1 can be represented as a normalized floating point
     number of type `float'.  This is supposed to be at least `37'.

`DBL_MAX_10_EXP'
`LDBL_MAX_10_EXP'
     These are similar to `FLT_MAX_10_EXP', but for the data types
     `double' and `long double', respectively.

`FLT_MAX'
     The value of this macro is the maximum number representable in type
     `float'.  It is supposed to be at least `1E+37'.  The value has
     type `float'.

     The smallest representable number is `- FLT_MAX'.

`DBL_MAX'
`LDBL_MAX'
     These are similar to `FLT_MAX', but for the data types `double'
     and `long double', respectively.  The type of the macro's value is
     the same as the type it describes.

`FLT_MIN'
     The value of this macro is the minimum normalized positive floating
     point number that is representable in type `float'.  It is supposed
     to be no more than `1E-37'.

`DBL_MIN'
`LDBL_MIN'
     These are similar to `FLT_MIN', but for the data types `double'
     and `long double', respectively.  The type of the macro's value is
     the same as the type it describes.

`FLT_EPSILON'
     This is the difference between 1 and the smallest floating point
     number of type `float' that is greater than 1.  It's supposed to
     be no greater than `1E-5'.

`DBL_EPSILON'
`LDBL_EPSILON'
     These are similar to `FLT_EPSILON', but for the data types
     `double' and `long double', respectively.  The type of the macro's
     value is the same as the type it describes.  The values are not
     supposed to be greater than `1E-9'.


File: libc.info,  Node: IEEE Floating Point,  Prev: Floating Point Parameters,  Up: Floating Type Macros

A.5.3.3 IEEE Floating Point
...........................

Here is an example showing how the floating type measurements come out
for the most common floating point representation, specified by the
`IEEE Standard for Binary Floating Point Arithmetic (ANSI/IEEE Std
754-1985)'.  Nearly all computers designed since the 1980s use this
format.

   The IEEE single-precision float representation uses a base of 2.
There is a sign bit, a mantissa with 23 bits plus one hidden bit (so
the total precision is 24 base-2 digits), and an 8-bit exponent that
can represent values in the range -125 to 128, inclusive.

   So, for an implementation that uses this representation for the
`float' data type, appropriate values for the corresponding parameters
are:

     FLT_RADIX                             2
     FLT_MANT_DIG                         24
     FLT_DIG                               6
     FLT_MIN_EXP                        -125
     FLT_MIN_10_EXP                      -37
     FLT_MAX_EXP                         128
     FLT_MAX_10_EXP                      +38
     FLT_MIN                 1.17549435E-38F
     FLT_MAX                 3.40282347E+38F
     FLT_EPSILON             1.19209290E-07F

   Here are the values for the `double' data type:

     DBL_MANT_DIG                         53
     DBL_DIG                              15
     DBL_MIN_EXP                       -1021
     DBL_MIN_10_EXP                     -307
     DBL_MAX_EXP                        1024
     DBL_MAX_10_EXP                      308
     DBL_MAX         1.7976931348623157E+308
     DBL_MIN         2.2250738585072014E-308
     DBL_EPSILON     2.2204460492503131E-016


File: libc.info,  Node: Structure Measurement,  Prev: Floating Type Macros,  Up: Data Type Measurements

A.5.4 Structure Field Offset Measurement
----------------------------------------

You can use `offsetof' to measure the location within a structure type
of a particular structure member.

 -- Macro: size_t offsetof (TYPE, MEMBER)
     Preliminary: | MT-Safe | AS-Safe | AC-Safe | *Note POSIX Safety
     Concepts::.

     This expands to an integer constant expression that is the offset
     of the structure member named MEMBER in the structure type TYPE.
     For example, `offsetof (struct s, elem)' is the offset, in bytes,
     of the member `elem' in a `struct s'.

     This macro won't work if MEMBER is a bit field; you get an error
     from the C compiler in that case.



Local Variables:
coding: utf-8
End: