This is dejagnu.info, produced by makeinfo version 5.2 from
dejagnu.texi.

INFO-DIR-SECTION Programming
START-INFO-DIR-ENTRY
* DejaGnu: (dejagnu).           The GNU testing framework.
END-INFO-DIR-ENTRY


File: dejagnu.info,  Node: Top,  Next: Abstract,  Up: (dir)

DejaGnu
*******

* Menu:

* Abstract::
* Overview::
* Getting DejaGnu up and running::
* Running Tests::
* Customizing DejaGnu::
* Extending DejaGnu::
* Unit Testing::
* Reference::
* Unit Testing API::

-- The Detailed Node Listing --

Overview

* What is DejaGnu ?::
* New In This Release: Release Notes.
* Design Goals::
* A POSIX conforming test framework: A POSIX Conforming Test Framework.

Getting DejaGnu up and running

* Test your installation::
* Create a minimal project, e.g. calc: Create a minimal project; e_g_ calc.
* Our first automated tests::
* A first remote test::

Running Tests

* Make check: Make Check.
* Runtest::
* The files DejaGnu produces.: Output Files.

Customizing DejaGnu

* Local Config File::
* Global Config File::
* Board Config File::
* Remote Host Testing::
* Config File Values::

Extending DejaGnu

* Adding A New Testsuite: Adding a new Testsuite.
* Adding A New Tool::
* Adding A New Target::
* Adding A New Board::
* Board Config File Values: Board File Values.
* Writing A Test Case::
* Debugging A Test Case::
* Adding A Test Case To A Testsuite.: Adding A Test Case To A Testsuite.
* Hints On Writing A Test Case::
* Special variables used by test cases.: Test Case Variables.

Unit Testing

* What Is Unit Testing ?::
* The dejagnu.h Header File: The dejagnu_h Header File.

Reference

* Obtaining DejaGnu::
* Installation::
* Builtin Procedures::
* File Map::

Unit Testing API

* C Unit Testing API::
* C++ Unit Testing API::



File: dejagnu.info,  Node: Abstract,  Next: Overview,  Prev: Top,  Up: Top

1 Abstract
**********

This document describes the functionality of DejaGnu, the testing
framework of the GNU project.  DejaGnu is written in Expect, which uses
Tcl as a command language.  Expect acts as a very programmable shell.
As with other Unix command shells, you can run any program, but once the
program is started, your test script has programmable control over its
input and output.  This does not just apply to the programs under test;
'expect' can also run any auxiliary program, such as 'diff' or 'sh',
with full control over its input and output.

   DejaGnu itself is merely a framework for the creation of testsuites.
Testsuites are distributed with each application.


File: dejagnu.info,  Node: Overview,  Next: Getting DejaGnu up and running,  Prev: Abstract,  Up: Top

2 Overview
**********

* Menu:

* What is DejaGnu ?::
* New In This Release: Release Notes.
* Design Goals::
* A POSIX conforming test framework: A POSIX Conforming Test Framework.


File: dejagnu.info,  Node: What is DejaGnu ?,  Next: Release Notes,  Up: Overview

2.1 What is DejaGnu ?
=====================

DejaGnu is a framework for testing other programs.  Its purpose is to
provide a single front end for all tests.  Think of it as a custom
library of Tcl procedures crafted to support writing a test harness.  A
_Test Harness_ is the testing infrastructure that is created to support
a specific program or tool.  Each program can have multiple testsuites,
all supported by a single test harness.  DejaGnu is written in Expect,
which in turn uses Tcl - Tool command language.  There is more
information on Tcl at the Tcl/Tk (http://www.tcl.tk) web site and the
Expect web site is at NIST (http://expect.nist.gov).

   Julia Menapace first coined the term "DejaGnu" to describe an earlier
testing framework at Cygnus Support she had written for 'GDB'.  When we
replaced it with the Expect-based framework, it was like DejaGnu all
over again.  More importantly, it was also named after my daughter, Deja
Snow Savoye, who was a toddler during DejaGnu's beginnings.

   DejaGnu offers several advantages for testing:

   * The flexibility and consistency of the DejaGnu framework make it
     easy to write tests for any program, with either batch oriented, or
     interactive programs.

   * DejaGnu provides a layer of abstraction which allows you to write
     tests that are portable to any host or target where a program must
     be tested.  For instance, a test for 'GDB' can run from any
     supported host system on any supported target system.  DejaGnu runs
     tests on many single board computers, whose operating software
     ranges from a simple boot monitor to a real-time OS.

   * All tests have the same output format.  This makes it easy to
     integrate testing into other software development processes.
     DejaGnu's output is designed to be parsed by other filtering script
     and it is also human readable.

   * Using Tcl and Expect, it's easy to create wrappers for existing
     testsuites.  By incorporating existing tests under DejaGnu, it's
     easier to have a single set of report analyse programs..

   Running tests requires two things: the testing framework and the
testsuites themselves.  Tests are usually written in Expect using Tcl,
but you can also use a Tcl script to run a testsuite that is not based
on Expect.  Expect script filenames conventionally use _.exp_ as a
suffix; for example, the main implementation of the DejaGnu test driver
is in the file runtest.exp.)


File: dejagnu.info,  Node: Release Notes,  Next: Design Goals,  Prev: What is DejaGnu ?,  Up: Overview

2.2 New In This Release
=======================

This release has a number of substantial changes over version 1.3.  The
most visible change is that the version of Expect and Tcl included in
the release are up-to-date with the current stable net releases.  The
biggest change is years of modifications to the target configuration
system, used for cross testing.  While this greatly improved cross
testing, it has made that subsystem very complicated.  The goal is to
have this entirely rewritten using iTcl by the next release.  Other
changes are:

   * More built-in support for building target binaries with the correct
     linker flags.  Currently this only works with GCC as the cross
     compiler, preferably with a target supported by *note Libgloss::.

   * Lots of little bug fixes from years of heavy use at Cygnus
     Solutions.

   * DejaGnu now uses Automake for Makefile configuration.

   * Updated documentation, now in DocBook XML.

   * Windows support.  There is beta level support for Windows that is
     still a work in progress.  This requires the Cygwin
     (http://www.cygwin.com/) POSIX subsystem for Windows.

* Menu:

* Windows Support::


File: dejagnu.info,  Node: Windows Support,  Up: Release Notes

2.2.1 Windows Support
---------------------

To use DejaGnu on Windows, you need to first install the Cygwin
(http://www.cygwin.com/) release.  This works as of the B20.1 release.
Cygwin is a POSIX system for Windows.  This covers both utility programs
and a library that adds POSIX system calls to Windows.  Among them is
pseudo tty support for Windows that emulates the POSIX pty standard.
The latest Cygwin is always available from this location
(http://www.cygwin.com/).  This works well enough to run _"make check"_
of the GNU development tree on Windows after a native build.  But the
nature of ptys on Windows is still evolving.  Your mileage may vary.


File: dejagnu.info,  Node: Design Goals,  Next: A POSIX Conforming Test Framework,  Prev: Release Notes,  Up: Overview

2.3 Design Goals
================

DejaGnu grew out of the internal needs of Cygnus Solutions, the company
formerly known as Cygnus Support.  Cygnus maintained and enhanced a
variety of free programs in many different environments and we needed a
testing tool that:

   * was useful to developers while fixing bugs;

   * automated running many tests during a software release process;

   * was portable among a variety of host computers;

   * supported cross-development testing;

   * permitted testing interactive programs, like 'GDB'; and

   * permitted testing batch oriented programs, like 'GCC'.

   Some of the requirements proved challenging.  For example,
interactive programs do not lend themselves very well to automated
testing.  But all the requirements are important: for instance, it is
imperative to make sure that 'GDB' works as well when cross-debugging as
it does in a native configuration.

   Probably the greatest challenge was testing in a cross-development
environment.  Most cross-development environments are customized by each
developer.  Even when buying packaged boards from vendors there are many
differences.  The communication interfaces vary from a serial line to
Ethernet.  DejaGnu was designed with a modular communication setup, so
that each kind of communication can be added as required and supported
thereafter.  Once a communication procedure is coded, any test can use
it.  Currently DejaGnu can use 'rsh', 'rlogin', 'telnet', 'tip',
'kermit' and 'mondfe' for remote communications.


File: dejagnu.info,  Node: A POSIX Conforming Test Framework,  Prev: Design Goals,  Up: Overview

2.4 A POSIX conforming test framework
=====================================

DejaGnu conforms to the POSIX 1003.3 standard for test frameworks.  Rob
Savoye was a member of that committee.

   The POSIX standard 1003.3 defines what a testing framework needs to
provide, in order to permit the creation of POSIX conformance test
suites.  This standard is primarily oriented to running POSIX
conformance tests, but its requirements also support testing of features
not related to POSIX conformance.  POSIX 1003.3 does not specify a
particular testing framework, but at this time there is only one other
POSIX conforming test framework: TET. TET was created by Unisoft for a
consortium comprised of X/Open, Unix International and the Open Software
Foundation.

   The POSIX documentation refers to "assertions".  An assertion is a
description of behavior.  For example, if a standard says "The sun shall
shine", a corresponding assertion might be "The sun is shining."  A test
based on this assertion would pass or fail depending on whether it is
day or night.  It is important to note that the standard being tested is
never 1003.3; the standard being tested is some other standard, for
which the assertions were written.

   As there is no testsuite to test testing frameworks for POSIX 1003.3
conformance, verifying conformance to this standard is done by
repeatedly reading the standard and experimenting.  One of the main
things 1003.3 does specify is the set of allowed output messages and
their definitions.  Four messages are supported for a required feature
of POSIX conforming systems and a fifth for a conditional feature.
DejaGnu supports the use of all five output messages.  In this sense a
testsuite that uses exactly these messages can be considered POSIX
conforming.  These definitions specify the output of a test case:

PASS
     A test has succeeded.  That is, it demonstrated that the assertion
     is true.

XFAIL
     POSIX 1003.3 does not incorporate the notion of expected failures,
     so _PASS_, instead of _XPASS_, must also be returned for test cases
     which were expected to fail and did not.  This means that _PASS_ is
     in some sense more ambiguous than if _XPASS_ is also used.

FAIL
     A test has produced the bug it was intended to capture.  That is,
     it has demonstrated that the assertion is false.  The _FAIL_
     message is based on the test case only.  Other messages are used to
     indicate a failure of the framework.  As with _PASS_, POSIX tests
     must return _FAIL_ rather than _XFAIL_ even if a failure was
     expected.

UNRESOLVED
     A test produced indeterminate results.  Usually, this means the
     test executed in an unexpected fashion; this outcome requires that
     a human being go over results, to determine if the test should have
     passed or failed.  This message is also used for any test that
     requires human intervention because it is beyond the abilities of
     the testing framework.  Any unresolved test should resolved to
     _PASS_ or _FAIL_ before a test run can be considered finished.

     Note that for POSIX, each assertion must produce a test result
     code.  If the test isn't actually run, it must produce _UNRESOLVED_
     rather than just leaving that test out of the output.  This means
     that you have to be careful when writing tests to not carelessly
     use Tcl commands like _return_--if you alter the flow of control of
     the Tcl code you must insure that every test still produces some
     result code.

     Here are some of the ways a test may wind up _UNRESOLVED_:

   * A test's execution is interrupted.

   * A test does not produce a clear result.  This is usually because
     there was an _ERROR_ from DejaGnu while processing the test, or
     because there were three or more _WARNING_ messages.  Any _WARNING_
     or _ERROR_ messages can invalidate the output of the test.  This
     usually requires a human being to examine the output to determine
     what really happened--and to improve the test case.

   * A test depends on a previous test, which fails.

   * The test was set up incorrectly.

UNTESTED
     A test was not run.  This is a place-holder, used when there is no
     real test case yet.

   The only remaining output message left is intended to test features
that are specified by the applicable POSIX standard as conditional:

UNSUPPORTED
     There is no support for the tested case.  This may mean that a
     conditional feature of an operating system, or of a compiler, is
     not implemented.  DejaGnu also uses this message when a testing
     environment (often a "bare board" target) lacks basic support for
     compiling or running the test case.  For example, a test for the
     system subroutine _gethostname_ would never work on a target board
     running only a boot monitor.

   DejaGnu uses the same output procedures to produce these messages for
all testsuites and these procedures are already known to conform to
POSIX 1003.3.  For a DejaGnu testsuite to conform to POSIX 1003.3, you
must avoid the _setup_xfail_ procedure as described in the _PASS_
section above and you must be careful to return _UNRESOLVED_ where
appropriate, as described in the _UNRESOLVED_ section above.


File: dejagnu.info,  Node: Getting DejaGnu up and running,  Next: Running Tests,  Prev: Overview,  Up: Top

3 Getting DejaGnu up and running
********************************

This chapter was originally written by Niklaus Giger (ngiger@mus.ch)
because he lost a week to figure out how DejaGnu works and how to write
a first test.

   Follow these instructions as closely a possible in order get a good
insight into how DejaGnu works, else you might run into a lot of subtle
problems.  You have been warned.

   It should be no big problems installing DejaGnu using your package
manager or from the source code.  On the Debian GNU/Linux system just
run (as root):

     apt-get install dejagnu

   These examples were run on a primary machine with a AMD K6 and a Mac
PowerBook G3 serving as a remote target.

   The tests for Windows were run under Windows using the actual Cygwin
version (1.3.x as of October 2001).  Its target system was a PPC
embedded system running vxWorks.

* Menu:

* Test your installation::
* Create a minimal project, e.g. calc: Create a minimal project; e_g_ calc.
* Our first automated tests::
* A first remote test::


File: dejagnu.info,  Node: Test your installation,  Next: Create a minimal project; e_g_ calc,  Up: Getting DejaGnu up and running

3.1 Test your installation
==========================

Create a new user called "dgt" (DejaGnuTest), which uses bash as it
login shell.  PS1 must be set to '\u:\w\$ ' in its ~/.bashrc.  Login as
this user, create an empty directory and change the working directory to
it.  e.g


     dgt:~$ mkdir ~/dejagnu.test
     dgt:~$ cd ~/dejagnu.test

   Now you are ready to test DejaGnu's main program called runtest.  The
expected output is shown

   *Runtest output in a empty directory *


     dgt:~/dejagnu.test$ runtest
     WARNING: Couldn't find the global config file.
     WARNING: No tool specified Test
     Run By dgt on Sun Nov 25 17:07:03 2001 Native configuration is i586-pc-linux-gnu
     === tests ===
     Schedule of variations: unix
     Running target unix Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target.
     Using /usr/share/dejagnu/config/unix.exp as generic interface file for target.
     ERROR: Couldn't find tool config file for unix.
     === Summary ===

   We will show you later how to get rid of all the WARNING- and
ERROR-messages.  The files testrun.sum and testrun.log have been
created, which do not interest us at this point.  Let's remove them.

     :~/dejagnu.test$ rm testrun.sum testrun.log

* Menu:

* Windows::
* Getting the source code for the calc example::


File: dejagnu.info,  Node: Windows,  Next: Getting the source code for the calc example,  Up: Test your installation

3.1.1 Windows
-------------

On Windows systems DejaGnu is part of a port of a lot of Unix tools to
the Windows OS, called Cygwin.  Cygwin may be downloaded and installed
from a mirror of http://www.cygwin.com/.  All examples were also run on
Windows.  If nothing is said, you can assume that you should get the
same output as on a Unix system.

   You will need a telnet daemon if you want to use a Windows box as a
remote target.  There seems to be a freeware telnet daemon at
http://www.fictional.net/.


File: dejagnu.info,  Node: Getting the source code for the calc example,  Prev: Windows,  Up: Test your installation

3.1.2 Getting the source code for the calc example
--------------------------------------------------

If you are running a Debian distribution you can find the examples under
/usr/share/doc/dejagnu/examples.  These examples seem to be missing in
Red Hat's RPM. In this case download the sources of DejaGnu and adjust
the paths to the DejaGnu examples accordingly.


File: dejagnu.info,  Node: Create a minimal project; e_g_ calc,  Next: Our first automated tests,  Prev: Test your installation,  Up: Getting DejaGnu up and running

3.2 Create a minimal project, e.g. calc
=======================================

In this section you will to start a small project, using the sample
application calc, which is part of your DejaGnu distribution

* Menu:

* A simple project without the GNU autotools::
* Using autoconf/autoheader/automake::


File: dejagnu.info,  Node: A simple project without the GNU autotools,  Next: Using autoconf/autoheader/automake,  Up: Create a minimal project; e_g_ calc

3.2.1 A simple project without the GNU autotools
------------------------------------------------

The runtest program can be run stand-alone.  All the autoconf/automake
support is just cause those programs are commonly used for other GNU
applications.  The key to running runtest stand-alone is having the
local site.exp file setup correctly, which automake does.

   The generated site.exp should like like:


     set tool calc
     set srcdir .
     set objdir /home/dgt/dejagnu.test


File: dejagnu.info,  Node: Using autoconf/autoheader/automake,  Prev: A simple project without the GNU autotools,  Up: Create a minimal project; e_g_ calc

3.2.2 Using autoconf/autoheader/automake
----------------------------------------

We have to prepare some input file in order to run autoconf and
automake.  There is book "GNU autoconf, automake and libtool" by Garry
V. Vaughan, et al.  NewRider, ISBN 1-57870-190-2 which describes this
process thoroughly.

   From the calc example distributed with the DejaGnu documentation you
should copy the program file itself (calc.c) and some additional files,
which you might examine a little bit close to derive their meanings.


     dgt:~/dejagnu.test$ cp -r /usr/share/doc/dejagnu/examples/calc/\
     {configure.in,Makefile.am,calc.c,testsuite} .

   In Makefile.am note the presence of the AUTOMAKE_OPTIONS = dejagnu.
This option is needed.

   Run aclocal to generate aclocal.m4, which is a collection of macros
needed by configure.in


     dgt:~/dejagnu.test$ aclocal

   autoconf is another part of the auto-tools.  Run it to generate
configure based on information contained in configure.in.


     dgt:~/dejagnu.test$ autoconf

   autoheader is another part of the auto-tools.  Run it to generate
calc.h.in.


     dgt:~/dejagnu.test$ autoheader

   The Makefile.am of this example was developed as port of the DejaGnu
distribution.  Adapt Makefile.am for this test.  Replace the line
"#noinst_PROGRAMS = calc" to "bin_PROGRAMS = calc".  Change the
RUNTESTDEFAULTFLAGS from "$$srcdir/testsuite" to "./testsuite".

   Running automake at this point contains a series of warning in its
output as shown in the following example:

   *Sample output of automake with missing files*


     dgt:~/dejagnu.test$ automake --add-missing
     automake: configure.in: installing `./install-sh'
     automake: configure.in: installing `./mkinstalldirs'
     automake: configure.in: installing `./missing'
     automake: Makefile.am: installing `./INSTALL'
     automake: Makefile.am: required file `./NEWS' not found
     automake: Makefile.am: required file `./README' not found
     automake: Makefile.am: installing `./COPYING'
     automake: Makefile.am: required file `./AUTHORS' not found
     automake: Makefile.am: required file `./ChangeLog' not found
     configure.in: 4: required file `./calc.h.in' not found
     Makefile.am:6: required directory ./doc does not exist

   Create a empty directory doc and empty files INSTALL, NEWS, README,
AUTHORS, ChangeLog and COPYING. The default COPYING will point to the
GNU Public License (GPL). In a real project it would be time to add some
meaningful text in each file.

   Adapt calc to your environment by calling configure.

   *Sample output of configure *


     dgt:~/dejagnu.test$ ./configure
     creating cache ./config.cache
     checking whether to enable maintainer-specific portions of Makefiles... no
     checking for a BSD compatible install... /usr/bin/install -c
     checking whether build environment is sane... yes
     checking whether make sets ${MAKE}... yes
     checking for working aclocal... found
     checking for working autoconf... found
     checking for working automake... found
     checking for working autoheader... found
     checking for working makeinfo... found
     checking for gcc... gcc checking whether the C compiler (gcc ) works... yes
     checking whether the C compiler (gcc ) is a cross-compiler... no
     checking whether we are using GNU C... yes
     checking whether gcc accepts -g... yes
     checking for a BSD compatible install... /usr/bin/install -c
     checking how to run the C preprocessor... gcc -E
     checking for stdlib.h... yes
     checking for strcmp... yes
     updating cache ./config.cache
     creating ./config.status
     creating Makefile creating calc.h

   If you are familiar with GNU software, this output should not contain
any surprise to you.  Any errors should be easy to fix for such a simple
program.

   Build the calc executable:

   *Sample output building calc *


     dgt:~/dejagnu.test$ make
     gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -c calc.c
     gcc -g -O2 -o calc calc.o

   You prepared a few files and then called some commands.  Respecting
the right order assures a automatic and correctly compiled calc program.
The following example resumes the correct order.

   *Creating the calc program using the GNU autotools*


     dgt:~/dejagnu.test$ aclocal
     dgt:~/dejagnu.test$ autoconf
     dgt:~/dejagnu.test$ autoheader
     dgt:~/dejagnu.test$ automake --add-missing
     dgt:~/dejagnu.test$ ./configure
     dgt:~/dejagnu.test$ make


   Play with calc and verify whether it works correctly.  A sample
session might look like this:


     dgt:~/dejagnu.test$ ./calc
     calc: version
     Version: 1.1
     calc: add 3 4
     7
     calc: multiply 3 4
     12
     calc: multiply 2 4
     12
     calc: quit


   Look at the intentional bug that 2 times 4 equals 12.

   The tests run by DejaGnu need a file called site.exp, which is
automatically generated if we call "make site.exp".  This was the
purpose of the "AUTOMAKE_OPTIONS = dejagnu" in Makefile.am.

   *Sample output generating a site.exp*


     dgt: make site.exp
     dgt:~/dejagnu.test$ make site.exp
     Making a new site.exp file...


File: dejagnu.info,  Node: Our first automated tests,  Next: A first remote test,  Prev: Create a minimal project; e_g_ calc,  Up: Getting DejaGnu up and running

3.3 Our first automated tests
=============================

* Menu:

* Running the test for the calc example::
* The various config files or how to avoid warnings::
* When trouble strikes::
* Testing "Hello world" locally::


File: dejagnu.info,  Node: Running the test for the calc example,  Next: The various config files or how to avoid warnings,  Up: Our first automated tests

3.3.1 Running the test for the calc example
-------------------------------------------

Now we are ready to call the automated tests

   *Sample output of runtest in a configured directory*


     dgt:~/dejagnu.test$ make check
     make check-DEJAGNU
     make[1]: Entering directory `/home/dgt/dejagnu.test' srcdir=`cd . && pwd`; export srcdir; \
     EXPECT=expect; export EXPECT; \ runtest=runtest; \
     if /bin/sh -c "$runtest --version" > /dev/null 2>&1; then \
     $runtest --tool calc CALC=`pwd`/calc --srcdir ./testsuite ; \
     else echo "WARNING: could not find \`runtest'" 1>&2; :;\
     fi
     WARNING: Couldn't find the global config file.
     WARNING: Couldn't find tool init file
     Test Run By dgt on Sun Nov 25 21:42:21 2001
     Native configuration is i586-pc-linux-gnu

            === calc tests ===

     Schedule of variations:
        unix

     Running target unix
     Using /usr/share/dejagnu/baseboards/unix.exp as board description file for target.
     Using /usr/share/dejagnu/config/unix.exp as generic interface file for target.
     Using ./testsuite/config/unix.exp as tool-and-target-specific interface file.
     Running ./testsuite/calc.test/calc.exp ...
     FAIL: multiply2 (bad match)

     === calc Summary ===

     # of expected passes 5
     # of unexpected failures 1
     /home/Dgt/dejagnu.test/calc version Version: 1.1
     make[1]: *** [check-DEJAGNU] Fehler 1
     make[1]: Leaving directory `/home/Dgt/dejagnu.test' make: *** [check-am] Fehler 2

   Did you see the line "FAIL:"?  The test cases for calc catch the bug
in the calc.c file.  Fix the error in calc.c later as the following
examples assume a unchanged calc.c.

   Examine the output files calc.sum and calc.log.  Try to understand
the test cases written in ~/dejagnu.test/testsuite/calc.test/calc.exp.
To understand Expect you might take a look at the book "Exploring
Expect", which is an excellent resource for learning and using Expect.
(Pub: O'Reilly, ISBN 1-56592-090-2) The book contains hundreds of
examples and also includes a tutorial on Tcl.  Exploring Expect is 602
pages long.


File: dejagnu.info,  Node: The various config files or how to avoid warnings,  Next: When trouble strikes,  Prev: Running the test for the calc example,  Up: Our first automated tests

3.3.2 The various config files or how to avoid warnings
-------------------------------------------------------

DejaGnu may be customized by each user.  It first searches for a file
called ~/.dejagnurc.  Create the file ~/.dejagnurc and insert the
following line:


     puts "I am ~/.dejagnurc"

   Rerun make check.  Test whether the output contains "I am
~/.dejagnurc".  Create ~/my_dejagnu.exp and insert the following line:


     puts "I am ~/my_dejagnu.exp"

   In a Bash-Shell enter


     dgt:~/dejagnu.test$ export DEJAGNU=~/my_dejagnu.exp

   Run "make check" again.  The output should not contain "WARNING:
Couldn't find the global config file.".  Create the sub-directory lib.
Create the file "calc.exp" in it and insert the following line:


     puts "I am lib/calc.exp"

   The last warning "WARNING: Couldn't find tool init file" should not
be part of the output of make check.  Create the directory ~/boards.
Create the file ~/boards/standard.exp and insert the following line:


     puts "I am boards/standard.exp"

   If the variable DEJAGNU is still not empty then the (abbreviated)
output of "make check" should look like this:

   *Sample output of runtest with the usual configuration files*


     dgt:~/dejagnu.test$ make check
     <...>
     fi
     I am ~/.dejagnurc
     I am ~/my_dejagnu.exp
     I am lib/calc.exp
     Test Run By dgt on Sun Nov 25 22:19:14 2001
     Native configuration is i586-pc-linux-gnu

          === calc tests ===
     Using /home/Dgt/boards/standard.exp as standard board description\
     file for build.
     I am ~/boards/standard.exp
     Using /home/Dgt/boards/standard.exp as standard board description\
      file for host.
     I am ~/boards/standard.exp

     Schedule of variations:
       unix

     Running target unix
     Using /home/Dgt/boards/standard.exp as standard board description\
      file for target.
     I am ~/boards/standard.exp
     Using /usr/share/dejagnu/baseboards/unix.exp as board description file\
     for target.
     <...>

   It is up to you to decide when and where to use any of the above
mentioned config files for customizing.  This chapters showed you where
and in which order the different config files are run.


File: dejagnu.info,  Node: When trouble strikes,  Next: Testing "Hello world" locally,  Prev: The various config files or how to avoid warnings,  Up: Our first automated tests

3.3.3 When trouble strikes
--------------------------

Calling runtest with the '-v'-flag shows you in even more details which
files are searched in which order.  Passing it several times gives more
and more details.

   *Displaying details about runtest execution*


     runtest -v -v -v --tool calc CALC=`pwd`/calc --srcdir ./testsuite

   Calling runtest with the '-debug'-flag logs a lot of details to
dbg.log where you can analyse it afterwards.

   In all test cases you can temporary adjust the verbosity of
information by adding the following Tcl command to any Tcl file that
gets loaded by dejagnu, for instance, ~/.dejagnurc:


     set verbose 9


File: dejagnu.info,  Node: Testing "Hello world" locally,  Prev: When trouble strikes,  Up: Our first automated tests

3.3.4 Testing "Hello world" locally
-----------------------------------

This test checks whether the shell command 'echo Hello world' will
really output "Hello world" to the console.  Create the file
'~/dejagnu.test/testsuite/calc.test/local_echo.exp'.  It should contain
the following lines:

   *A first (local) test case*


     set test "Local Hello World"
     spawn echo Hello World
     expect {
        "Hello World"  { pass $test }
        default { fail $test }
     }

   Run runtest again and verify the output "calc.log"


File: dejagnu.info,  Node: A first remote test,  Prev: Our first automated tests,  Up: Getting DejaGnu up and running

3.4 A first remote test
=======================

Testing remote targets is a lot trickier especially if you are using an
embedded target which has no built in support for things like a
compiler, FTP server or a Bash-shell.  Before you can test calc on a
remote target you have to acquire a few basics skills.

* Menu:

* Setup telnet to your own host::
* A test case for login via telnet::
* Remote testing "Hello world"::
* Transferring files from/to the target::
* Preparing for cross-compilation::
* Remote testing of calc::
* Using Windows as host and vxWorks as target::


File: dejagnu.info,  Node: Setup telnet to your own host,  Next: A test case for login via telnet,  Up: A first remote test

3.4.1 Setup telnet to your own host
-----------------------------------

The easiest remote host is usually the host you are working on.  In this
example we will use telnet to login in your own workstation.  For
security reasons you should never have a telnet daemon running on
machine connected on the Internet, as password and user names are
transmitted in clear text.  We assume you know how to setup your machine
for a telnet daemon.

   Next try whether you may login in your own host by issuing the
command "telnet localhost.1".  In order to be able to distinguish
between a normal session and a telnet login add the following lines to
/home/dgt/.bashrc.


     if [ "$REMOTEHOST" ]
     then
        PS1='remote:\w\$ '
     fi

   Now on the machine a "remote" login looks like this:

   *Sample log of a telnet login to localhost*


     dgt:~/dejagnu.test$ telnet localhost
     Trying 127.0.0.1...
     Connected to 127.0.0.1.
     Escape character is '^]'.
     Debian GNU/Linux testing/unstable Linux
     K6Linux login: dgt
     Password:
     Last login: Sun Nov 25 22:46:34 2001 from localhost on pts/4
     Linux K6Linux 2.4.14 #1 Fre Nov 16 19:28:25 CET 2001 i586 unknown
     No mail.
     remote:~$ exit
     logout
     Connection closed by foreign host.


File: dejagnu.info,  Node: A test case for login via telnet,  Next: Remote testing "Hello world",  Prev: Setup telnet to your own host,  Up: A first remote test

3.4.2 A test case for login via telnet
--------------------------------------

In order to define a correct setup we have add a line containing "set
target unix" either to ~/.dejagnurc or to ~/my_dejagnu.exp.  In
~/boards/standard.exp add the following four lines to define a few
patterns for the DejaGnu telnet login procedure.

   *Defining a remote target board*


     set_board_info shell_prompt    "remote:"
     set_board_info telnet_username "dgt"
     set_board_info telnet_password "top_secret"
     set_board_info hostname        "localhost"


   As DejaGnu will be parsing the telnet session output for some well
known pattern the output there are a lot of things that can go wrong.
If you have any problems verify your setup:

   * Is '/etc/motd' empty?

   * Is '/etc/issue.net' empty?

   * Exists a empty '~/.hushlogin'?

   * The LANG environment variable must be either empty or set to "C".

   To test the login via telnet write a sample test case.  Create the
file ~/dejagnu.test/testsuite/calc.test/remote_echo.exp and add the
following few lines:

   *DejaGnu script for logging in into a remote target*


     puts "this is remote_echo.exp target for $target "
     target_info $target
     #set verbose 9
     set shell_id [remote_open $target]
     set test "Remote login to $target"
     #set verbose 0
     puts "Spawn id for remote shell is $shell_id"
     if { $shell_id > 0 } {
        pass "$test"
     } else {
        fail "Remote open to $target"
     }

   In the runtest output you should find something like:


     Running ./testsuite/calc.test/local_echo.exp ...
     Running ./testsuite/calc.test/remote_echo.exp ...
     this is remote_echo.exp target is unix
     Spawn id for remote shell is exp7

   Have again a look at calc.log to get a feeling how DejaGnu and expect
parse the input.


File: dejagnu.info,  Node: Remote testing "Hello world",  Next: Transferring files from/to the target,  Prev: A test case for login via telnet,  Up: A first remote test

3.4.3 Remote testing "Hello world"
----------------------------------

Next you will transform the above "hello world" example to its remote
equivalent.  This can be done by adding the following lines to our file
remote_echo.exp.

   *A first (local) remote "Hello world" test*


     set test "Remote_send Hello World"
     set status [remote_send $target "echo \"Hello\" \"World\"\n" ]
     pass "$test"
     set test "Remote_expect Hello World"
     remote_expect $target 5 {
        -re "Hello World"  { pass "$test" }
     }

   Call make check.  The output should contain "# of expected passes 9"
and "# of unexpected failures 1".

   Have a look at the procedures in /usr/share/dejagnu/remote.exp to
have an overview of the offered procedures and their features.

   Now setup a real target.  In the following example we assume as
target a PowerBook running Debian.  As above add a test user "dgt",
install Telnet and FTP servers.  In order to distinguish it from the
host add the line

     PS1='test:>'

   to /home/dgt/.bash_profile.  Also add a corresponding entry
"powerbook" to /etc/hosts and verify that you are able to ping, telnet
and ftp to the target "powerbook".

   In order to let runtest run its test on the "powerbook" target change
the following lines in ~/boards/standard.exp:

   *Board definition for a remote target*


     set_board_info protocol        "telnet"
     set_board_info telnet_username "dgt"
     set_board_info telnet_password "top_secret"
     set_board_info shell_prompt    "test:> "
     set_board_info hostname        "powerbook"

   Now call runtest again with the same arguments and verify whether all
went okay by taking a close look at calc.log.


File: dejagnu.info,  Node: Transferring files from/to the target,  Next: Preparing for cross-compilation,  Prev: Remote testing "Hello world",  Up: A first remote test

3.4.4 Transferring files from/to the target
-------------------------------------------

A simple procedure like this will do the job for you:

   *Test script to transfer a file to a remote target*


     set test "Remote_download"
     puts "Running Remote_download"
     # set verbose 9
     set remfile /home/dgt/dejagnu2

     set status [remote_download $target /home/dgt/.dejagnurc $remfile]
     if { "$status" == "" } {
          fail "Remote download to $remfile on $target"
     } else {
        pass "$test"
     }

     puts "status of remote_download ist $status"
     # set verbose 0

   After running runtest again, check whether the file dejagnu2 exists
on the target.  This example will only work if the rcp command works
with your target.  If you have a working FTP-server on the target you
can use it by adding the following lines to ~/boards/standard.exp:

   *Defining a board to use FTP as file transport*


     set_board_info file_transfer   "ftp"
     set_board_info ftp_username    "dgt"
     set_board_info ftp_password    "1234"


File: dejagnu.info,  Node: Preparing for cross-compilation,  Next: Remote testing of calc,  Prev: Transferring files from/to the target,  Up: A first remote test

3.4.5 Preparing for cross-compilation
-------------------------------------

For cross-compilation you need working binutils, gcc and a base library
like libc or glib for your target.  It is beyond the scope of this
document to describe how to get it working.  The following examples
assume a cross compiler for PowerPC which is called linux-powerpc-gcc.

   Add AC_CANONICAL_TARGET in dejagnu.test/configure.in at the following
location.  Copy config.guess from /usr/share/automake to dejagnu.test.


     AM_CONFIG_HEADER(calc.h)
     AC_CANONICAL_TARGET([])
     AM_INIT_AUTOMAKE(calc, 1.1)

   You need to run automake 2.5 or later.  Depending on your
installation calling autoconf2.5 instead of autoconf is not needed.  The
sequence to regenerate all files is:

   *Using autotools for cross development*


     $ autoconf2.5
     $ autoheader
     $ automake
     $ ./configure --host=powerpc-linux --target=powerpc-linux
     configure: WARNING: If you wanted to set the --build type, don't use --host.
         If a cross compiler is detected then cross compile mode will be used.
     checking build system type... ./config.guess: ./config.guess: No such file or directory
     configure: error: cannot guess build type; you must specify one
     $ cp /usr/share/automake/config.guess .
     $ ./configure --host=powerpc-linux --target=powerpc-linux
     configure: WARNING: If you wanted to set the --build type, don't use --host.
     If a cross compiler is detected then cross compile mode will be used. \
     checking build system type... i586-pc-linux-gnu
     checking host system type... powerpc-unknown-linux-gnu
     <...>
     checking whether we are cross compiling... yes
     <...>
     Configuration:
     Source code location: .
     C Compiler: powerpc-linux-gcc
     C Compiler flags: -g -O2


   Everything should be ready to recompile for the target:

     $ make
     powerpc-linux-gcc -DHAVE_CONFIG_H -I. -I. -I. -g -O2 -c calc.c
     powerpc-linux-gcc -g -O2 -o calc calc.o



File: dejagnu.info,  Node: Remote testing of calc,  Next: Using Windows as host and vxWorks as target,  Prev: Preparing for cross-compilation,  Up: A first remote test

3.4.6 Remote testing of calc
----------------------------

Not yet written, as I have problem getting libc6-dev-powerpc to work.
Probably I first have to build my cross compiler.


File: dejagnu.info,  Node: Using Windows as host and vxWorks as target,  Prev: Remote testing of calc,  Up: A first remote test

3.4.7 Using Windows as host and vxWorks as target
-------------------------------------------------

A more thorough walk-through will be written in a few weeks.

   In order to test the vxWorks as a target I changed
boards/standards.exp to reflect my settings (IP, username, password).
Then I reconfigured vxWorks to include a FTP and telnet server (using
the same username/password combination ad in boards/standard.exp).

   With this setup and some minor modification (e.g.  replacing echo by
printf) in my test cases I could test my vxWorks system.  It sure does
not seem to be a correct setup by DejaGnu standard.  For instance, it
still loading /usr/share/dejagnu/baseboards/unix.exp instead of vxWorks.
In any case I found that (at least under Windows) I did not find out how
the command line would let me override settings in my personal config
files.


File: dejagnu.info,  Node: Running Tests,  Next: Customizing DejaGnu,  Prev: Getting DejaGnu up and running,  Up: Top

4 Running Tests
***************

There are two ways to execute a testsuite.  The most common way is when
there is existing support in the 'Makefile'.  This support consists of a
_check_ target.  The other way is to execute the 'runtest' program
directly.  To run 'runtest' directly from the command line requires
either all the correct options, or the *note Local Config File:: must be
setup correctly.

* Menu:

* Make check: Make Check.
* Runtest::
* The files DejaGnu produces.: Output Files.


File: dejagnu.info,  Node: Make Check,  Next: Runtest,  Up: Running Tests

4.1 Make check
==============

To run tests from an existing collection, first use 'configure' as usual
to set up the build directory.  Then try typing:


           make check


   If the _check_ target exists, it usually saves you some trouble.  For
instance, it can set up any auxiliary programs or other files needed by
the tests.  The most common file the check builds is the _site.exp_.
The site.exp file contains various variables that DejaGnu used to
determine the configuration of the program being tested.  This is mostly
for supporting remote testing.

   The _check_ target is supported by GNU Automake.  To have DejaGnu
support added to your generated 'Makefile.in', just add the keyword
dejagnu to the AUTOMAKE_OPTIONS variable in your 'Makefile.am' file.

   Once you have run _make check_ to build any auxiliary files, you can
invoke the test driver 'runtest' directly to repeat the tests.  You will
also have to execute 'runtest' directly for test collections with no
_check_ target in the 'Makefile'.


File: dejagnu.info,  Node: Runtest,  Next: Output Files,  Prev: Make Check,  Up: Running Tests

4.2 Runtest
===========

'runtest' is the executable test driver for DejaGnu.  You can specify
two kinds of things on the 'runtest' command line: command line options,
and Tcl variables for the test scripts.  The options are listed
alphabetically below.

   'runtest' returns an exit code of _1_ if any test has an unexpected
result; otherwise (if all tests pass or fail as expected) it returns _0_
as the exit code.

* Menu:

* Output States::
* Invoking Runtest::
* Common Options: Common Operations.


File: dejagnu.info,  Node: Output States,  Next: Invoking Runtest,  Up: Runtest

4.2.1 Output States
-------------------

'runtest' flags the outcome of each test as one of these cases.  *note A
POSIX Conforming Test Framework:: for a discussion of how POSIX
specifies the meanings of these cases.

PASS
     The most desirable outcome: the test succeeded, and was expected to
     succeed.

XPASS
     A pleasant kind of failure: a test was expected to fail, but
     succeeded.  This may indicate progress; inspect the test case to
     determine whether you should amend it to stop expecting failure.

FAIL
     A test failed, although it was expected to succeed.  This may
     indicate regress; inspect the test case and the failing software to
     locate the bug.

XFAIL
     A test failed, but it was expected to fail.  This result indicates
     no change in a known bug.  If a test fails because the operating
     system where the test runs lacks some facility required by the
     test, the outcome is _UNSUPPORTED_ instead.

UNRESOLVED
     Output from a test requires manual inspection; the testsuite could
     not automatically determine the outcome.  For example, your tests
     can report this outcome is when a test does not complete as
     expected.

UNTESTED
     A test case is not yet complete, and in particular cannot yet
     produce a _PASS_ or _FAIL_. You can also use this outcome in dummy
     "tests" that note explicitly the absence of a real test case for a
     particular property.

UNSUPPORTED
     A test depends on a conditionally available feature that does not
     exist (in the configured testing environment).  For example, you
     can use this outcome to report on a test case that does not work on
     a particular target because its operating system support does not
     include a required subroutine.

   runtest may also display the following messages:

ERROR
     Indicates a major problem (detected by the test case itself) in
     running the test.  This is usually an unrecoverable error, such as
     a missing file or loss of communication to the target.  (POSIX
     testsuites should not emit this message; use _UNSUPPORTED_,
     _UNTESTED_, or _UNRESOLVED_ instead, as appropriate.)

WARNING
     Indicates a possible problem in running the test.  Usually warnings
     correspond to recoverable errors, or display an important message
     about the following tests.

NOTE
     An informational message about the test case.


File: dejagnu.info,  Node: Invoking Runtest,  Next: Common Operations,  Prev: Output States,  Up: Runtest

4.2.2 Invoking Runtest
----------------------

This is the full set of command line options that 'runtest' recognizes.
Arguments may be abbreviated to the shortest unique string.

'--all' (-a)
     Display all test output.  By default, _runtest_ shows only the
     output of tests that produce unexpected results; that is, tests
     with status _FAIL_ (unexpected failure), _XPASS_ (unexpected
     success), or _ERROR_ (a severe error in the test case itself).
     Specify '--all' to see output for tests with status _PASS_
     (success, as expected) _XFAIL_ (failure, as expected), or _WARNING_
     (minor error in the test case itself).

'--build [string]'
     _string_ is a full configuration "triple" name as used by
     'configure'.  This is the type of machine DejaGnu and the tools to
     be tested are built on.  For a normal cross this is the same as the
     host, but for a Canadian cross, they are separate.

'--host [string]'
     'string' is a full configuration "triple" name as used by
     _configure_.  Use this option to override the default string
     recorded by your configuration's choice of host.  This choice does
     not change how anything is actually configured unless -build is
     also specified; it affects _only_ DejaGnu procedures that compare
     the host string with particular values.  The procedures _ishost_,
     _istarget_, _isnative_, and _setup_xfail_ are affected by '--host'.
     In this usage, _host_ refers to the machine that the tests are to
     be run on, which may not be the same as the _build_ machine.  If
     '--build' is also specified, then '--host' refers to the machine
     that the tests will be run on, not the machine DejaGnu is run on.

'--host_board [name]'
     The host board to use.

'--target [string]'
     Use this option to override the default setting (running native
     tests).  _string_ is a full configuration "triple" name of the form
     _cpu-vendor-os_ as used by 'configure'.  This option changes the
     configuration _runtest_ uses for the default tool names, and other
     setup information.

'--debug' (-de)
     Turns on the _expect_ internal debugging output.  Debugging output
     is displayed as part of the _runtest_ output, and logged to a file
     called 'dbg.log'.  The extra debugging output does _not_ appear on
     standard output, unless the verbose level is greater than 2 (for
     instance, to see debug output immediately, specify '--debug -v
     -v').  The debugging output shows all attempts at matching the test
     output of the tool with the scripted patterns describing expected
     output.  The output generated with '--strace' also goes into
     'dbg.log'.

'--help' (-he)
     Prints out a short summary of the _runtest_ options, then exits
     (even if you also specify other options).

'--ignore [name(s)] '
     The names of specific tests to ignore.

'--objdir [path]'
     Use _path_ as the top directory containing any auxiliary compiled
     test code.  This defaults to '.'.  Use this option to locate
     pre-compiled test code.  You can normally prepare any auxiliary
     files needed with _make_.

'--outdir [path]'
     Write output logs in directory 'path'.  The default is _._, the
     directory where you start _runtest_.  This option affects only the
     summary and the detailed log files 'tool.sum' and 'tool.log'.  The
     DejaGnu debug log 'dbg.log' always appears (when requested) in the
     local directory.

'--log_dialog'
     Emit Expect output to stdout.  The _expect_ output is usually only
     written to 'tool.log'.  By enabling this option, they are also be
     printed to the stdout of the _runtest_ invocation.

'--reboot [name]'
     Reboot the target board when _runtest_ initializes.  Usually, when
     running tests on a separate target board, it is safer to reboot the
     target to be certain of its state.  However, when developing test
     scripts, rebooting takes a lot of time.

'--srcdir [path]'
     Use 'path' as the top directory for test scripts to run.  _runtest_
     looks in this directory for any subdirectory whose name begins with
     the toolname (specified with '--tool').  For instance, with '--tool
     gdb', _runtest_ uses tests in subdirectories 'gdb.*' (with the
     usual shell-like filename expansion).  If you do not use
     '--srcdir', _runtest_ looks for test directories under the current
     working directory.

'--strace [number]'
     Turn on internal tracing for _expect_, to n levels deep.  By
     adjusting the level, you can control the extent to which your
     output expands multi-level Tcl statements.  This allows you to
     ignore some levels of _case_ or _if_ statements.  Each procedure
     call or control structure counts as one "level".  The output is
     recorded in the same file, 'dbg.log', used for output from
     '--debug'.

'--connect [program]'
     Connect to a target testing environment as specified by _type_, if
     the target is not the computer running _runtest_.  For example, use
     '--connect' to change the program used to connect to a "bare board"
     boot monitor.  The choices for _type_ in the DejaGnu 1.4
     distribution are _rlogin_, _telnet_, _rsh_, _tip_, _kermit_, and
     _mondfe_.

     The default for this option depends on the configuration most
     convenient communication method available, but often other
     alternatives work as well; you may find it useful to try
     alternative connect methods if you suspect a communication problem
     with your testing target.

'--baud [number]'
     Set the default baud rate to something other than 9600.  (Some
     serial interface programs, like _tip_, use a separate
     initialization file instead of this value.)

'--target_board [name(s)]'
     The list of target boards to run tests on.

'--tool[name(s)]'
     Specifies which testsuite to run, and what initialization module to
     use.  '--tool' is used _only_ for these two purposes.  It is _not_
     used to name the executable program to test.  Executable tool names
     (and paths) are recorded in 'site.exp' and you can override them by
     specifying Tcl variables on the command line.

     For example, including "'--tool' gcc" on the _runtest_ command line
     runs tests from all test subdirectories whose names match 'gcc.*',
     and uses one of the initialization modules named
     'config/*-gcc.exp'.  To specify the name of the compiler (perhaps
     as an alternative path to what _runtest_ would use by default), use
     _GCC=binname_ on the _runtest_ command line.

'--tool_exec [name]'
     The path to the tool executable to test.

'--tool_opts [options]'
     A list of additional options to pass to the tool.

'--verbose' (-v)
     Turns on more output.  Repeating this option increases the amount
     of output displayed.  Level one (_-v_) is simply test output.
     Level two (_-v -v_) shows messages on options, configuration, and
     process control.  Verbose messages appear in the detailed ('*.log')
     log file, but not in the summary ('*.sum') log file.

'--version' (-V)
     Prints out the version numbers of DejaGnu, _expect_ and Tcl, and
     exits without running any tests.

'--D[0-1]'
     Start the internal Tcl debugger.  The Tcl debugger supports
     breakpoints, single stepping, and other common debugging
     activities.  See the document "Debugger for Tcl Applications" by
     Don Libes.  (Distributed in PostScript form with _expect_ as the
     file 'expect/tcl-debug.ps.'.  If you specify _-D1_, the _expect_
     shell stops at a breakpoint as soon as DejaGnu invokes it.  If you
     specify _-D0_, DejaGnu starts as usual, but you can enter the
     debugger by sending an interrupt (e.g.  by typing <C><c>).

'testfile'.exp[=arg(s)]
     Specify the names of testsuites to run.  By default, _runtest_ runs
     all tests for the tool, but you can restrict it to particular
     testsuites by giving the names of the _.exp expect_ scripts that
     control them.  _testsuite_.exp may not include path information;
     use plain filenames.

'testfile'.exp="testfile1 ..."
     Specify a subset of tests in a suite to run.  For compiler or
     assembler tests, which often use a single _.exp_ script covering
     many different source files, this option allows you to further
     restrict the tests by listing particular source files to compile.
     Some tools even support wildcards here.  The wildcards supported
     depend upon the tool, but typically they are _?_, _*_, and
     _[chars]_.

'tclvar'=value
     You can define Tcl variables for use by your test scripts in the
     same style used with _make_ for environment variables.  For
     example, _runtest GDB=gdb.old_ defines a variable called 'GDB';
     when your scripts refer to '$GDB' in this run, they use the value
     _gdb.old_.

     The default Tcl variables used for most tools are defined in the
     main DejaGnu _Makefile_; their values are captured in the
     'site.exp' file.


File: dejagnu.info,  Node: Common Operations,  Prev: Invoking Runtest,  Up: Runtest

4.2.3 Common Options
--------------------

Typically, you don't need must to use any command-line options.
'--tool' used is only required when there are more than one testsuite in
the same directory.  The default options are in the local site.exp file,
created by "make site.exp".

   For example, if the directory 'gdb/testsuite' contains a collection
of DejaGnu tests for GDB, you can run them like this:


     	  eg$ cd gdb/testsuite
     	  eg$ runtest --tool gdb


   Test output follows, ending with:


     		=== gdb Summary ===

     		# of expected passes 508
     		# of expected failures 103
     		/usr/latest/bin/gdb version 4.14.4 -nx


   You can use the option '--srcdir' to point to some other directory
containing a collection of tests:


     	  eg$ runtest--srcdir /devo/gdb/testsuite


   By default, 'runtest' prints only the names of the tests it runs,
output from any tests that have unexpected results, and a summary
showing how many tests passed and how many failed.  To display output
from all tests (whether or not they behave as expected), use the '--all'
option.  For more verbose output about processes being run,
communication, and so on, use '--verbose'.  To see even more output, use
multiple '--verbose' options.  for a more detailed explanation of each
'runtest' option.

   Test output goes into two files in your current directory: summary
output in 'tool.sum', and detailed output in ' tool.log'.  (_tool_
refers to the collection of tests; for example, after a run with
'--tool' gdb, look for output files 'gdb.sum' and 'gdb.log'.)


File: dejagnu.info,  Node: Output Files,  Prev: Runtest,  Up: Running Tests

4.3 The files DejaGnu produces.
===============================

DejaGnu always writes two kinds of output files: summary logs and
detailed logs.  The contents of both of these are determined by your
tests.

   For troubleshooting, a third kind of output file is useful: use
'--debug' to request an output file showing details of what Expect is
doing internally.

* Menu:

* Summary File::
* Log File::
* Debug Log File::


File: dejagnu.info,  Node: Summary File,  Next: Log File,  Up: Output Files

4.3.1 Summary File
------------------

DejaGnu always produces a summary output file 'tool.sum'.  This summary
shows the names of all test files run; for each test file, one line of
output from each 'pass' command (showing status _PASS_ or _XPASS_) or
'fail' command (status _FAIL_ or _XFAIL_); trailing summary statistics
that count passing and failing tests (expected and unexpected); and the
full pathname and version number of the tool tested.  (All possible
outcomes, and all errors, are always reflected in the summary output
file, regardless of whether or not you specify '--all'.)

   If any of your tests use the procedures 'unresolved', 'unsupported',
or 'runtested', the summary output also tabulates the corresponding
outcomes.

   For example, after 'runtest --tool binutils', look for a summary log
in 'binutils.sum'.  Normally, DejaGnu writes this file in your current
working directory; use the '--outdir' option to select a different
directory.

   *Here is a short sample summary log*


     	Test Run By rob on Mon May 25 21:40:57 PDT 1992
     		 === gdb tests ===
     	Running ./gdb.t00/echo.exp ...
     	PASS:   Echo test
     	Running ./gdb.all/help.exp ...
     	PASS:   help add-symbol-file
     	PASS:   help aliases
     	PASS:   help breakpoint "bre" abbreviation
     	FAIL:   help run "r" abbreviation
     	Running ./gdb.t10/crossload.exp ...
     	PASS:   m68k-elf (elf-big) explicit format; loaded
     	XFAIL:  mips-ecoff (ecoff-bigmips) "ptype v_signed_char" signed C types
                     === gdb Summary ===
     	# of expected passes 5
     	# of expected failures 1
     	# of unexpected failures 1
     	/usr/latest/bin/gdb version 4.6.5 -q



File: dejagnu.info,  Node: Log File,  Next: Debug Log File,  Prev: Summary File,  Up: Output Files

4.3.2 Log File
--------------

DejaGnu also saves a detailed log file 'tool.log', showing any output
generated by tests as well as the summary output.  For example, after
'runtest --tool binutils', look for a detailed log in 'binutils.log'.
Normally, DejaGnu writes this file in your current working directory;
use the '--outdir' option to select a different directory.

   *Here is a brief example showing a detailed log for G++ tests*


     	Test Run By rob on Mon May 25 21:40:43 PDT 1992

                     === g++ tests ===

     	--- Running ./g++.other/t01-1.exp ---
             PASS:   operate delete

     	--- Running ./g++.other/t01-2.exp ---
             FAIL:   i960 bug EOF
     	p0000646.C: In function `int  warn_return_1 ()':
     	p0000646.C:109: warning: control reaches end of non-void function
     	p0000646.C: In function `int  warn_return_arg (int)':
     	p0000646.C:117: warning: control reaches end of non-void function
     	p0000646.C: In function `int  warn_return_sum (int, int)':
     	p0000646.C:125: warning: control reaches end of non-void function
     	p0000646.C: In function `struct foo warn_return_foo ()':
     	p0000646.C:132: warning: control reaches end of non-void function

     	--- Running ./g++.other/t01-4.exp ---
             FAIL:   abort
     	900403_04.C:8: zero width for bit-field `foo'
     	--- Running ./g++.other/t01-3.exp ---
             FAIL:   segment violation
     	900519_12.C:9: parse error before `;'
     	900519_12.C:12: Segmentation violation
     	/usr/latest/bin/gcc: Internal compiler error: program cc1plus got fatal signal

                     === g++ Summary ===

     	# of expected passes 1
     	# of expected failures 3
     	/usr/latest/bin/g++ version cygnus-2.0.1



File: dejagnu.info,  Node: Debug Log File,  Prev: Log File,  Up: Output Files

4.3.3 Debug Log File
--------------------

With the '--debug' option, you can request a log file showing the output
from Expect itself, running in debugging mode.  This file ('dbg.log', in
the directory where you start 'runtest') shows each pattern Expect
considers in analyzing test output.

   This file reflects each 'send' command, showing the string sent as
input to the tool under test; and each Expect command, showing each
pattern it compares with the tool output.

   *The log messages begin with a message of the form*


     	expect: does {tool output} (spawn_id n)
     	 match pattern {expected pattern}?


   For every unsuccessful match, Expect issues a _no_ after this
message; if other patterns are specified for the same Expect command,
they are reflected also, but without the first part of the message
(_expect...  match pattern_).

   When Expect finds a match, the log for the successful match ends with
_yes_, followed by a record of the Expect variables set to describe a
successful match.

   *Here is an excerpt from the debugging log for a GDB test:*


     	send: sent {break gdbme.c:34\n} to spawn id 6
     	expect: does {} (spawn_id 6) match pattern {Breakpoint.*at.* file
     	gdbme.c, line 34.*\(gdb\) $}? no
	     {.*\(gdb\) $}? no
     	expect: does {} (spawn_id 0) match pattern {return} ? no
	     {\(y or n\) }? no
	     {buffer_full}? no
	     {virtual}? no
	     {memory}? no
	     {exhausted}? no
	     {Undefined}? no
	     {command}? no
     	break gdbme.c:34
     	Breakpoint 8 at 0x23d8: file gdbme.c, line 34.
     	(gdb) expect: does {break gdbme.c:34\r\nBreakpoint 8 at 0x23d8:
     	file gdbme.c, line 34.\r\n(gdb) } (spawn_id 6) match pattern
	     {Breakpoint.*at.* file gdbme.c, line 34.*\(gdb\) $}? yes
     	expect: set expect_out(0,start) {18}
     	expect: set expect_out(0,end) {71}
     	expect: set expect_out(0,string) {Breakpoint 8 at 0x23d8: file
     	gdbme.c, line 34.\r\n(gdb) }
     	epect: set expect_out(spawn_id) {6}
     	expect: set expect_out(buffer) {break gdbme.c:34\r\nBreakpoint 8
     	at 0x23d8: file gdbme.c, line 34.\r\n(gdb) }
             PASS:   70      0       breakpoint line number in file


   This example exhibits three properties of Expect and DejaGnu that
might be surprising at first glance:

   * Empty output for the first attempted match.  The first set of
     attempted matches shown ran against the output _{}_ -- that is, no
     output.  Expect begins attempting to match the patterns supplied
     immediately; often, the first pass is against incomplete output (or
     completely before all output, as in this case).

   * Interspersed tool output.  The beginning of the log entry for the
     second attempted match may be hard to spot: this is because the
     prompt _{(gdb) }_ appears on the same line, just before the
     _expect:_ that marks the beginning of the log entry.

   * Fail-safe patterns.  Many of the patterns tested are fail-safe
     patterns provided by GDB testing utilities, to reduce possible
     indeterminacy.  It is useful to anticipate potential variations
     caused by extreme system conditions (GDB might issue the message
     _virtual memory exhausted_ in rare circumstances), or by changes in
     the tested program (_Undefined command_ is the likeliest outcome if
     the name of a tested command changes).

     The pattern _{return}_ is a particularly interesting fail-safe to
     notice; it checks for an unexpected <RET> prompt.  This may happen,
     for example, if the tested tool can filter output through a pager.

     These fail-safe patterns (like the debugging log itself) are
     primarily useful while developing test scripts.  Use the 'error'
     procedure to make the actions for fail-safe patterns produce
     messages starting with _ERROR_ on standard output, and in the
     detailed log file.


File: dejagnu.info,  Node: Customizing DejaGnu,  Next: Extending DejaGnu,  Prev: Running Tests,  Up: Top

5 Customizing DejaGnu
*********************

The site configuration file, 'site.exp', captures
configuration-dependent values and propagates them to the DejaGnu test
environment using Tcl variables.  This ties the DejaGnu test scripts
into the 'configure' and 'make' programs.  If this file is setup
correctly, it is possible to execute a testsuite merely by typing
'runtest'.

   DejaGnu supports two 'site.exp' files.  The multiple instances of
'site.exp' are loaded in a fixed order built into DejaGnu.  The first
file loaded is the local file 'site.exp', and then the optional global
'site.exp' file as pointed to by the 'DEJAGNU' environment variable.

   There is an optional _master_ 'site.exp', capturing configuration
values that apply to DejaGnu across the board, in each
configuration-specific subdirectory of the DejaGnu library directory.
'runtest' loads these values first.  The master 'site.exp' contains the
default values for all targets and hosts supported by DejaGnu.  This
master file is identified by setting the environment variable 'DEJAGNU'
to the name of the file.  This is also referred to as the "global"
config file.

   Any directory containing a configured testsuite also has a local
'site.exp', capturing configuration values specific to the tool under
test.  Since 'runtest' loads these values last, the individual test
configuration can either rely on and use, or override, any of the global
values from the global 'site.exp' file.

   You can usually generate or update the testsuite's local 'site.exp'
by typing 'make site.exp' in the testsuite directory, after the test
suite is configured.

   You can also have a file in your home directory called '.dejagnurc'.
This gets loaded first before the other config files.  Usually this is
used for personal stuff, like setting the 'all_flag' so all the output
gets printed, or your own verbosity levels.  This file is usually
restricted to setting command line options.

   You can further override the default values in a user-editable
section of any 'site.exp', or by setting variables on the 'runtest'
command line.

* Menu:

* Local Config File::
* Global Config File::
* Board Config File::
* Remote Host Testing::
* Config File Values::


File: dejagnu.info,  Node: Local Config File,  Next: Global Config File,  Up: Customizing DejaGnu

5.1 Local Config File
=====================

It is usually more convenient to keep these _manual overrides_ in the
'site.exp' local to each test directory, rather than in the global
'site.exp' in the installed DejaGnu library.  This file is mostly for
supplying tool specific info that is required by the testsuite.

   All local 'site.exp' files have two sections, separated by comment
text.  The first section is the part that is generated by 'make'.  It is
essentially a collection of Tcl variable definitions based on 'Makefile'
environment variables.  Since they are generated by 'make', they contain
the values as specified by 'configure'.  (You can also customize these
values by using the '--site' option to 'configure'.)  In particular,
this section contains the 'Makefile' variables for host and target
configuration data.  Do not edit this first section; if you do, your
changes are replaced next time you run 'make'.

   *The first section starts with*


     	## these variables are automatically generated by make ##
     	# Do not edit here. If you wish to override these values
     	# add them to the last section


   In the second section, you can override any default values (locally
to DejaGnu) for all the variables.  The second section can also contain
your preferred defaults for all the command line options to 'runtest'.
This allows you to easily customize 'runtest' for your preferences in
each configured test-suite tree, so that you need not type options
repeatedly on the command line.  (The second section may also be empty,
if you do not wish to override any defaults.)

   *The first section ends with this line*


     	## All variables above are generated by configure. Do Not Edit ##


   You can make any changes under this line.  If you wish to redefine a
variable in the top section, then just put a duplicate value in this
second section.  Usually the values defined in this config file are
related to the configuration of the test run.  This is the ideal place
to set the variables 'host_triplet', 'build_triplet', 'target_triplet'.
All other variables are tool dependent, i.e., for testing a compiler,
the value for 'CC' might be set to a freshly built binary, as opposed to
one in the user's path.

   Here's an example local site.exp file, as used for GCC/G++ testing.

   *Local Config File*


           ## these variables are automatically generated by make ##
           # Do not edit here. If you wish to override these values
           # add them to the last section
           set rootme "/build/devo-builds/i586-pc-linux-gnulibc1/gcc"
           set host_triplet i586-pc-linux-gnulibc1
           set build_triplet i586-pc-linux-gnulibc1
           set target_triplet i586-pc-linux-gnulibc1
           set target_alias i586-pc-linux-gnulibc1
           set CFLAGS ""
           set CXXFLAGS "-isystem /build/devo-builds/i586-pc-linux-gnulibc1/gcc/../libio -isystem $srcdir/../libg++/src -isystem $srcdir/../libio -isystem $srcdir/../libstdc++ -isystem $srcdir/../libstdc++/stl -L/build/devo-builds/i586-pc-linux-gnulibc1/gcc/../libg++ -L/build/devo-builds/i586-pc-linux-gnulibc1/gcc/../libstdc++"
           append LDFLAGS " -L/build/devo-builds/i586-pc-linux-gnulibc1/gcc/../ld"
           set tmpdir /build/devo-builds/i586-pc-linux-gnulibc1/gcc/testsuite
           set srcdir "${srcdir}/testsuite"
           ## All variables above are generated by configure. Do Not Edit ##


   This file defines the required fields for a local config file, namely
the three config triplets, and the srcdir.  It also defines several
other Tcl variables that are used exclusively by the GCC testsuite.  For
most test cases, the CXXFLAGS and LDFLAGS are supplied by DejaGnu itself
for cross testing, but to test a compiler, GCC needs to manipulate these
itself.


File: dejagnu.info,  Node: Global Config File,  Next: Board Config File,  Prev: Local Config File,  Up: Customizing DejaGnu

5.2 Global Config File
======================

The master config file is where all the target specific config variables
for a whole site get set.  The idea is that for a centralized testing
lab where people have to share a target between multiple developers.
There are settings for both remote targets and remote hosts.  Here's an
example of a Master Config File (also called the Global config file) for
a _Canadian cross_.  A Canadian cross is when you build and test a cross
compiler on a machine other than the one it's to be hosted on.

   Here we have the config settings for our California office.  Note
that all config values are site dependent.  Here we have two sets of
values that we use for testing m68k-aout cross compilers.  As both of
these target boards has a different debugging protocol, we test on both
of them in sequence.

   *Global Config file*


           # Make sure we look in the right place for the board description files.
           if ![info exists boards_dir] {
               set boards_dir {}
           }
           lappend boards_dir "/nfs/cygint/s1/cygnus/dejagnu/boards"

           verbose "Global Config File: target_triplet is $target_triplet" 2
           global target_list

           case "$target_triplet" in {
               { "native" } {
                   set target_list "unix"
               }
               { "sparc64-*elf" } {
                   set target_list "sparc64-sim"
               }
               { "mips-*elf" } {
                   set target_list "mips-sim wilma barney"
               }
               { "mips-lsi-elf" } {
                   set target_list "mips-lsi-sim{,soft-float,el}"
               }
               { "sh-*hms" } {
                   set target_list { "sh-hms-sim" "bloozy" }
               }
           }


   In this case, we have support for several cross compilers, that all
run on this host.  For testing on operating systems that don't support
Expect, DejaGnu can be run on the local build machine, and it can
connect to the remote host and run all the tests for this cross compiler
on that host.  All the remote OS requires is a working Telnet server.

   As you can see, all one does is set the variable 'target_list' to the
list of targets and options to test.  The simple settings, like for
_sparc64-elf_ only require setting the name of the single board config
file.  The _mips-elf_ target is more complicated.  Here it sets the list
to three target boards.  One is the default mips target, and both
_wilma_ _barney_ are symbolic names for other mips boards.  Symbolic
names are covered in the *note Adding A New Board:: chapter.  The more
complicated example is the one for _mips-lsi-elf_.  This one runs the
tests with multiple iterations using all possible combinations of the
'--soft-float' and the '--el' (little endian) option.  Needless to say,
this last feature is mostly compiler specific.


File: dejagnu.info,  Node: Board Config File,  Next: Remote Host Testing,  Prev: Global Config File,  Up: Customizing DejaGnu

5.3 Board Config File
=====================

The board config file is where board specific config data is stored.  A
board config file contains all the higher-level configuration settings.
There is a rough inheritance scheme, where it is possible to base a new
board description file on an existing one.  There are also collections
of custom procedures for common environments.  For more information on
adding a new board config file, go to the *note Adding A New Board::
chapter.

   An example board config file for a GNU simulator is as follows.
'set_board_info' is a procedure that sets the field name to the
specified value.  The procedures in square brackets _[]_ are _helper
procedures_.  These are used to find parts of a tool chain required to
build an executable image that may reside in various locations.  This is
mostly of use for when the startup code, the standard C libraries, or
the tool chain itself is part of your build tree.

   *Board Config File*


           # This is a list of toolchains that are supported on this board.
           set_board_info target_install {sparc64-elf}

           # Load the generic configuration for this board. This will define any
           # routines needed by the tool to communicate with the board.
           load_generic_config "sim"

           # We need this for find_gcc and *_include_flags/*_link_flags.
           load_base_board_description "basic-sim"

           # Use long64 by default.
           process_multilib_options "long64"

           setup_sim sparc64

           # We only support newlib on this target. We assume that all multilib
           # options have been specified before we get here.
           set_board_info compiler  "[find_gcc]"
           set_board_info cflags  "[libgloss_include_flags] [newlib_include_flags]"
           set_board_info ldflags  "[libgloss_link_flags] [newlib_link_flags]"
           # No linker script.
           set_board_info ldscript "";

           # Used by a few gcc.c-torture testcases to delimit how large the
           # stack can be.
           set_board_info gcc,stack_size 16384
           # The simulator doesn't return exit statuses and we need to indicate this
           # the standard GCC wrapper will work with this target.
           set_board_info needs_status_wrapper 1
           # We can't pass arguments to programs.
           set_board_info noargs 1


   There are five helper procedures used in this example.  The first
one, 'find gcc' looks for a copy of the GNU compiler in your build tree,
or it uses the one in your path.  This will also return the proper
transformed name for a cross compiler if you whole build tree is
configured for one.  The next helper procedures are
'libgloss_include_flags' & 'libgloss_link_flags'.  These return the
proper flags to compiler and link an executable image using *note
Libgloss::, the GNU BSP (Board Support Package).  The final procedures
are 'newlib_include_flag' & 'newlib_include_flag'.  These find the
Newlib C library, which is a reentrant standard C library for embedded
systems comprising of non GPL'd code.


File: dejagnu.info,  Node: Remote Host Testing,  Next: Config File Values,  Prev: Board Config File,  Up: Customizing DejaGnu

5.4 Remote Host Testing
=======================

     *Note*

     Thanks to DJ Delorie for the original paper that this section is
     based on.

   DejaGnu also supports running the tests on a remote host.  To set
this up, the remote host needs an FTP server, and a telnet server.
Currently foreign operating systems used as remote hosts are VxWorks,
VRTX, DOS/Windows 3.1, MacOS and Windows.

   The recommended source for a Windows-based FTP server is to get IIS
(either IIS 1 or Personal Web Server) from http://www.microsoft.com
(http://www.microsoft.com).  When you install it, make sure you install
the FTP server - it's not selected by default.  Go into the IIS manager
and change the FTP server so that it does not allow anonymous FTP. Set
the home directory to the root directory (i.e.  c:\) of a suitable
drive.  Allow writing via FTP.

   It will create an account like IUSR_FOOBAR where foobar is the name
of your machine.  Go into the user editor and give that account a
password that you don't mind hanging around in the clear (i.e.  not the
same as your admin or personal passwords).  Also, add it to all the
various permission groups.

   You'll also need a telnet server.  For Windows, go to the Ataman
(http://ataman.com) web site, pick up the Ataman Remote Logon Services
for Windows, and install it.  You can get started on the eval period
anyway.  Add IUSR_FOOBAR to the list of allowed users, set the HOME
directory to be the same as the FTP default directory.  Change the Mode
prompt to simple.

   Ok, now you need to pick a directory name to do all the testing in.
For the sake of this example, we'll call it piggy (i.e.  c:\piggy).
Create this directory.

   You'll need a unix machine.  Create a directory for the scripts
you'll need.  For this example, we'll use /usr/local/swamp/testing.
You'll need to have a source tree somewhere, say /usr/src/devo.  Now,
copy some files from releng's area in SV to your machine:

   *Remote host setup*


           cd /usr/local/swamp/testing
           mkdir boards
           scp darkstar.welcomehome.org:/dejagnu/cst/bin/MkTestDir .
           scp darkstar.welcomehome.org:/dejagnu/site.exp .
           scp darkstar.welcomehome.org:/dejagnu/boards/useless98r2.exp boards/foobar.exp
           export DEJAGNU=/usr/local/swamp/testing/site.exp


   You must edit the boards/foobar.exp file to reflect your machine;
change the hostname (foobar.com), username (iusr_foobar), password, and
ftp_directory (c:/piggy) to match what you selected.

   Edit the global ' site.exp' to reflect your boards directory:

   *Add The Board Directory*


     	lappend boards_dir "/usr/local/swamp/testing/boards"


   Now run MkTestDir, which is in the contrib directory.  The first
parameter is the toolchain prefix, the second is the location of your
devo tree.  If you are testing a cross compiler (ex: you have
sh-hms-gcc.exe in your PATH on the PC), do something like this:

   *Setup Cross Remote Testing*


     	./MkTestDir sh-hms /usr/dejagnu/src/devo


   If you are testing a native PC compiler (ex: you have gcc.exe in your
PATH on the PC), do this:

   *Setup Native Remote Testing*


     	./MkTestDir '' /usr/dejagnu/src/devo


   To test the setup, 'ftp' to your PC using the username (iusr_foobar)
and password you selected.  CD to the test directory.  Upload a file to
the PC. Now telnet to your PC using the same username and password.  CD
to the test directory.  Make sure the file is there.  Type "set" and/or
"gcc -v" (or sh-hms-gcc -v) and make sure the default PATH contains the
installation you want to test.

   *Run Test Remotely*


     	cd /usr/local/swamp/testing
     	make  -k -w check RUNTESTFLAGS="--host_board foobar --target_board foobar -v -v" > check.out 2>&1


   To run a specific test, use a command like this (for this example,
you'd run this from the gcc directory that MkTestDir created):

   *Run a Test Remotely*


     	make check RUNTESTFLAGS="--host_board sloth --target_board sloth -v compile.exp=921202-1.c"


   Note: if you are testing a cross-compiler, put in the correct target
board.  You'll also have to download more .exp files and modify them for
your local configuration.  The -v's are optional.


File: dejagnu.info,  Node: Config File Values,  Prev: Remote Host Testing,  Up: Customizing DejaGnu

5.5 Config File Values
======================

DejaGnu uses a named array in Tcl to hold all the info for each machine.
In the case of a Canadian cross, this means host information as well as
target information.  The named array is called 'target_info', and it has
two indices.  The following fields are part of the array.

* Menu:

* Command Line Option Variables: Option Variables.
* Personal Config File::


File: dejagnu.info,  Node: Option Variables,  Next: Personal Config File,  Up: Config File Values

5.5.1 Command Line Option Variables
-----------------------------------

In the user editable second section of the *note Personal Config File::
you can not only override the configuration variables captured in the
first section, but also specify default values for all on the 'runtest'
command line options.  Save for '--debug', '--help', and '--version',
each command line option has an associated Tcl variable.  Use the Tcl
'set' command to specify a new default value (as for the configuration
variables).  The following table describes the correspondence between
command line options and variables you can set in 'site.exp'.  *note
Invoking Runtest::, for explanations of the command-line options.

   *Tcl Variables For Command Line Options*

runtest option           Tcl variable             description
-all                     all_flag                 display all test
                                                  results if set
-baud                    baud                     set the default baud
                                                  rate to something
                                                  other than 9600.
-connect                 connectmode              'rlogin', 'telnet',
                                                  'rsh', 'kermit',
                                                  'tip', or 'mondfe'
-outdir                  outdir                   directory for
                                                  'tool.sum' and
                                                  'tool.log.'
-objdir                  objdir                   directory for
                                                  pre-compiled binaries
-reboot                  reboot                   reboot the target if
                                                  set to _"1"_; do not
                                                  reboot if set to _"0"_
                                                  (the default).
-srcdir                  srcdir                   directory of test
                                                  subdirectories
-strace                  tracelevel               a number: Tcl trace
                                                  depth
-tool                    tool                     name of tool to test;
                                                  identifies init, test
                                                  subdir
-verbose                 verbose                  verbosity level.  As
                                                  option, use multiple
                                                  times; as variable,
                                                  set a number, 0 or
                                                  greater.
-target                  target_triplet           The canonical
                                                  configuration string
                                                  for the target.
-host                    host_triplet             The canonical
                                                  configuration string
                                                  for the host.
-build                   build_triplet            The canonical
                                                  configuration string
                                                  for the build host.
-mail                    address                  Email the output log
                                                  to the specified
                                                  address.


File: dejagnu.info,  Node: Personal Config File,  Prev: Option Variables,  Up: Config File Values

5.5.2 Personal Config File
--------------------------

The personal config file is used to customize 'runtest's' behaviour for
each person.  It is typically used to set the user preferred setting for
verbosity, and any experimental Tcl procedures.  My personal
'~/.dejagnurc' file looks like:

   *Personal Config File*


     	set all_flag 1
     	set RLOGIN /usr/ucb/rlogin
     	set RSH /usr/local/sbin/ssh


   Here I set 'all_flag' so I see all the test cases that PASS along
with the ones that FAIL. I also set 'RLOGIN' to the BSD version.  I have
Kerberos installed, and when I rlogin to a target board, it usually
isn't supported.  So I use the non secure version rather than the
default that's in my path.  I also set 'RSH' to the SSH secure shell, as
rsh is mostly used to test unix machines within a local network here.


File: dejagnu.info,  Node: Extending DejaGnu,  Next: Unit Testing,  Prev: Customizing DejaGnu,  Up: Top

6 Extending DejaGnu
*******************

* Menu:

* Adding A New Testsuite: Adding a new Testsuite.
* Adding A New Tool::
* Adding A New Target::
* Adding A New Board::
* Board Config File Values: Board File Values.
* Writing A Test Case::
* Debugging A Test Case::
* Adding A Test Case To A Testsuite.: Adding A Test Case To A Testsuite.
* Hints On Writing A Test Case::
* Special variables used by test cases.: Test Case Variables.


File: dejagnu.info,  Node: Adding a new Testsuite,  Next: Adding A New Tool,  Up: Extending DejaGnu

6.1 Adding A New Testsuite
==========================

The testsuite for a new tool should always be located in that tools
source directory.  DejaGnu require the directory be named 'testsuite'.
Under this directory, the test cases go in a subdirectory whose name
begins with the tool name.  For example, for a tool named _flubber_,
each subdirectory containing testsuites must start with _"flubber."_.


File: dejagnu.info,  Node: Adding A New Tool,  Next: Adding A New Target,  Prev: Adding a new Testsuite,  Up: Extending DejaGnu

6.2 Adding A New Tool
=====================

In general, the best way to learn how to write (code or even prose) is
to read something similar.  This principle applies to test cases and to
testsuites.  Unfortunately, well-established testsuites have a way of
developing their own conventions: as test writers become more
experienced with DejaGnu and with Tcl, they accumulate more utilities,
and take advantage of more and more features of Expect and Tcl in
general.

   Inspecting such established testsuites may make the prospect of
creating an entirely new testsuite appear overwhelming.  Nevertheless,
it is quite straightforward to get a new testsuite going.

   There is one testsuite that is guaranteed not to grow more elaborate
over time: both it and the tool it tests were created expressly to
illustrate what it takes to get started with DejaGnu.  The 'example/'
directory of the DejaGnu distribution contains both an interactive tool
called 'calc', and a testsuite for it.  Reading this testsuite, and
experimenting with it, is a good way to supplement the information in
this section.  (Thanks to Robert Lupton for creating calc and its
testsuite--and also the first version of this section of the manual!)

   To help orient you further in this task, here is an outline of the
steps to begin building a testsuite for a program example.

   * Create or select a directory to contain your new collection of
     tests.  Change into that directory (shown here as 'testsuite'):

     Create a 'configure.in' file in this directory, to control
     configuration-dependent choices for your tests.  So far as DejaGnu
     is concerned, the important thing is to set a value for the
     variable 'target_abbrev'; this value is the link to the init file
     you will write soon.  (For simplicity, we assume the environment is
     Unix, and use _unix_ as the value.)

     What else is needed in 'configure.in' depends on the requirements
     of your tool, your intended test environments, and which configure
     system you use.  This example is a minimal configure.in for use
     with GNU Autoconf.

   * Create 'Makefile.in' (if you are using Autoconf), or
     'Makefile.am'(if you are using Automake), the source file used by
     configure to build your 'Makefile'.  If you are using GNU
     Automake.just add the keyword _dejagnu_ to the _AUTOMAKE_OPTIONS_
     variable in your 'Makefile.am' file.  This will add all the
     Makefile support needed to run DejaGnu, and support the *note Make
     Check:: target.

     You also need to include two targets important to DejaGnu: _check_,
     to run the tests, and _site.exp_, to set up the Tcl copies of
     configuration-dependent values.  This is called the *note Local
     Config File:: The check target must run the 'runtest' program to
     execute the tests.

     The 'site.exp' target should usually set up (among other things)
     the $tool variable for the name of your program.  If the local
     site.exp file is setup correctly, it is possible to execute the
     tests by merely typing 'runtest' on the command line.

     *Sample Makefile.in Fragment*


          	# Look for a local version of DejaGnu, otherwise use one in the path
          	RUNTEST = `if test -f $(top_srcdir)/../dejagnu/runtest; then \
          	      echo $(top_srcdir) ../dejagnu/runtest; \
          	    else \
          	       echo runtest; \
          	     fi`

          	# The flags to pass to runtest
          	RUNTESTFLAGS =

          	# Execute the tests
          	check: site.exp all
                  $(RUNTEST) $(RUNTESTFLAGS) \
                      --tool ${example} --srcdir $(srcdir)

          	# Make the local config file
          	site.exp: ./config.status Makefile
	              @echo "Making a new config file..."
                      -@rm -f ./tmp?
                      @touch site.exp

                      -@mv site.exp site.bak
                      @echo "## these variables are automatically\
           generated by make ##" > ./tmp0
	              @echo "# Do not edit here. If you wish to\
           override these values" >> ./tmp0
                      @echo "# add them to the last section" >> ./tmp0
                      @echo "set host_os ${host_os}" >> ./tmp0
                      @echo "set host_alias ${host_alias}" >> ./tmp0
                      @echo "set host_cpu ${host_cpu}" >> ./tmp0
                      @echo "set host_vendor ${host_vendor}" >> ./tmp0
                      @echo "set target_os ${target_os}" >> ./tmp0
                      @echo "set target_alias ${target_alias}" >> ./tmp0
                      @echo "set target_cpu ${target_cpu}" >> ./tmp0
                      @echo "set target_vendor ${target_vendor}" >> ./tmp0
                      @echo "set host_triplet ${host_canonical}" >> ./tmp0
                      @echo "set target_triplet ${target_canonical}">>./tmp0
                      @echo "set tool binutils" >> ./tmp0
                      @echo "set srcdir ${srcdir}" >> ./tmp0
                      @echo "set objdir `pwd`" >> ./tmp0
                      @echo "set ${examplename} ${example}" >> ./tmp0
                      @echo "## All variables above are generated by\
           configure. Do Not Edit ##" >> ./tmp0
                      @cat ./tmp0 > site.exp
                      @sed < site.bak \
                         -e '1,/^## All variables above are.*##/ d' \
                         >> site.exp
                      -@rm -f ./tmp?


   * Create a directory (in 'testsuite') called 'config'.  Make a _Tool
     Init File_ in this directory.  Its name must start with the
     'target_abbrev' value, or be named 'default.exp' so call it
     'config/unix.exp' for our Unix based example.  This is the file
     that contains the target-dependent procedures.  Fortunately, on
     Unix, most of them do not have to do very much in order for
     'runtest' to run.

     If the program being tested is not interactive, you can get away
     with this minimal 'unix.exp' to begin with:

     *Simple Batch Program Tool Init File*


          	  proc foo_exit {} {}
          	  proc foo_version {} {}


     If the program being tested is interactive, however, you might as
     well define a _start_ routine and invoke it by using an init file
     like this:

     *Simple Interactive Program Tool Init File*


          	  proc foo_exit {} {}
          	  proc foo_version {} {}

          	  proc foo_start {} {
          	    global ${examplename}
          	    spawn ${examplename}
          	    expect {
          	        -re "" {}
	              }
	            }

          	  # Start the program running we want to test
          	  foo_start


   * Create a directory whose name begins with your tool's name, to
     contain tests.  For example, if your tool's name is _gcc_, then the
     directories all need to start with _"gcc."_.

   * Create a sample test file.  Its name must end with '.exp'.  You can
     use 'first-try.exp'.  To begin with, just write there a line of Tcl
     code to issue a message.

     *Testing A New Tool Config*


          	  send_user "Testing: one, two...\n"


   * Back in the 'testsuite' (top level) directory, run 'configure'.
     Typically you do this while in the build directory.  You may have
     to specify more of a path, if a suitable configure is not available
     in your execution path.

   * You are now ready to triumphantly type 'make check' or 'runtest'.
     You should see something like this:

     *Example Test Case Run*


          	  Test Run By rhl on Fri Jan 29 16:25:44 EST 1993

                          === example tests ===

          	  Running ./example.0/first-try.exp ...
          	  Testing: one, two...

                          === example Summary ===


     There is no output in the summary, because so far the example does
     not call any of the procedures that establish a test outcome.

   * Write some real tests.  For an interactive tool, you should
     probably write a real exit routine in fairly short order.  In any
     case, you should also write a real version routine soon.


File: dejagnu.info,  Node: Adding A New Target,  Next: Adding A New Board,  Prev: Adding A New Tool,  Up: Extending DejaGnu

6.3 Adding A New Target
=======================

DejaGnu has some additional requirements for target support, beyond the
general-purpose provisions of configure.  DejaGnu must actively
communicate with the target, rather than simply generating or managing
code for the target architecture.  Therefore, each tool requires an
initialization module for each target.  For new targets, you must supply
a few Tcl procedures to adapt DejaGnu to the target.  This permits
DejaGnu itself to remain target independent.

   Usually the best way to write a new initialization module is to edit
an existing initialization module; some trial and error will be
required.  If necessary, you can use the '--debug' option to see what is
really going on.

   When you code an initialization module, be generous in printing
information controlled by the 'verbose' procedure.

   For cross targets, most of the work is in getting the communications
right.  Communications code (for several situations involving IP
networks or serial lines) is available in a DejaGnu library file.

   If you suspect a communication problem, try running the connection
interactively from Expect.  (There are three ways of running Expect as
an interactive interpreter.  You can run Expect with no arguments, and
control it completely interactively; or you can use 'expect -i' together
with other command-line options and arguments; or you can run the
command 'interpreter' from any Expect procedure.  Use 'return' to get
back to the calling procedure (if any), or 'return -tcl' to make the
calling procedure itself return to its caller; use 'exit' or end-of-file
to leave Expect altogether.)  Run the program whose name is recorded in
'$connectmode', with the arguments in '$targetname', to establish a
connection.  You should at least be able to get a prompt from any target
that is physically connected.


File: dejagnu.info,  Node: Adding A New Board,  Next: Board File Values,  Prev: Adding A New Target,  Up: Extending DejaGnu

6.4 Adding A New Board
======================

Adding a new board consists of creating a new board config file.
Examples are in 'dejagnu/baseboards'.  Usually to make a new board file,
it's easiest to copy an existing one.  It is also possible to have your
file be based on a _baseboard_ file with only one or two changes needed.
Typically, this can be as simple as just changing the linker script.
Once the new baseboard file is done, add it to the 'boards_DATA' list in
the 'dejagnu/baseboards/Makefile.am', and regenerate the Makefile.in
using automake.  Then just rebuild and install DejaGnu.  You can test it
by:

   There is a crude inheritance scheme going on with board files, so you
can include one board file into another, The two main procedures used to
do this are 'load_generic_config' and 'load_base_board_description'.
The generic config file contains other procedures used for a certain
class of target.  The board description file is where the board specific
settings go.  Commonly there are similar target environments with just
different processors.

   *Testing a New Board Config File*


           make check RUNTESTFLAGS="--target_board=newboardfile".


   Here's an example of a board config file.  There are several _helper
procedures_ used in this example.  A helper procedure is one that look
for a tool of files in commonly installed locations.  These are mostly
used when testing in the build tree, because the executables to be
tested are in the same tree as the new dejagnu files.  The helper
procedures are the ones in square braces _[]_, which is the Tcl
execution characters.

   *Example Board Config File*


           # Load the generic configuration for this board. This will define a basic
           # set of routines needed by the tool to communicate with the board.
           load_generic_config "sim"

           # basic-sim.exp is a basic description for the standard Cygnus simulator.
           load_base_board_description "basic-sim"

           # The compiler used to build for this board. This has *nothing* to do
           # with what compiler is tested if we're testing gcc.
           set_board_info compiler "[find_gcc]"

           # We only support newlib on this target.
           # However, we include libgloss so we can find the linker scripts.
           set_board_info cflags "[newlib_include_flags] [libgloss_include_flags]"
           set_board_info ldflags "[newlib_link_flags]"

           # No linker script for this board.
           set_board_info ldscript "-Tsim.ld";

           # The simulator doesn't return exit statuses and we need to indicate this.
           set_board_info needs_status_wrapper 1

           # Can't pass arguments to this target.
           set_board_info noargs 1

           # No signals.
           set_board_info gdb,nosignals 1

           # And it can't call functions.
           set_board_info gdb,cannot_call_functions 1



File: dejagnu.info,  Node: Board File Values,  Next: Writing A Test Case,  Prev: Adding A New Board,  Up: Extending DejaGnu

6.5 Board Config File Values
============================

These fields are all in the 'board_info' array.  These are all set by
using the 'set_board_info' and 'add_board_info' procedures as required.
The parameters are the field name, followed by the value that the field
is set to or is added to the field, respectively.

   *Common Board Info Fields*

Field                    Sample Value             Description
compiler                 "[find_gcc]"             The path to the
                                                  compiler to use.
cflags                   "-mca"                   Compilation flags for
                                                  the compiler.
ldflags                  "[libgloss_link_flags]   Linking flags for the
                         [newlib_link_flags]"     compiler.
ldscript                 "-Wl,-Tidt.ld"           The linker script to
                                                  use when cross
                                                  compiling.
libs                     "-lgcc"                  Any additional
                                                  libraries to link in.
shell_prompt             "cygmon>"                The command prompt of
                                                  the remote shell.
hex_startaddr            "0xa0020000"             The Starting address
                                                  as a string.
start_addr               0xa0008000               The starting address
                                                  as a value.
startaddr                "a0020000"
exit_statuses_bad        1                        Whether there is an
                                                  accurate exit status.
reboot_delay             10                       The delay between
                                                  power off and power
                                                  on.
unreliable               1                        Whether communication
                                                  with the board is
                                                  unreliable.
sim                      [find_sim]               The path to the
                                                  simulator to use.
objcopy                  $tempfil                 The path to the
                                                  'objcopy' program.
support_libs             "${prefix_dir}/i386-coff/"Support libraries
                                                  needed for cross
                                                  compiling.
addl_link_flags          "-N"                     Additional link flags,
                                                  rarely used.

   These fields are used by the GCC and GDB tests, and are mostly only
useful to somewhat trying to debug a new board file for one of these
tools.  Many of these are used only by a few testcases, and their
purpose is esoteric.  These are listed with sample values as a guide to
better guessing if you need to change any of these.

   *Board Info Fields For GCC & GDB*

Field                    Sample Value             Description
strip                    $tempfile                Strip the executable
                                                  of symbols.
gdb_load_offset          "0x40050000"
gdb_protocol             "remote"                 The GDB debugging
                                                  protocol to use.
gdb_sect_offset          "0x41000000";
gdb_stub_ldscript        "-Wl,-Teva-stub.ld"      The linker script to
                                                  use with a GDB stub.
gdb,cannot_call_functions1                        Whether GDB can call
                                                  functions on the
                                                  target,
gdb,noargs               1                        Whether the target can
                                                  take command line
                                                  arguments.
gdb,nosignals            1                        Whether there are
                                                  signals on the target.
gdb,short_int            1
gdb,start_symbol         "_start";                The starting symbol in
                                                  the executable.
gdb,target_sim_options   "-sparclite"             Special options to
                                                  pass to the simulator.
gdb,timeout              540                      Timeout value to use
                                                  for remote
                                                  communication.
gdb_init_command         "set mipsfpu none"       A single command to
                                                  send to GDB before the
                                                  program being debugged
                                                  is started.
gdb_init_commands        "print/x \$fsr = 0x0"    Same as
                                                  _gdb_init_command_,
                                                  except that this is a
                                                  list, more commands
                                                  can be added.
gdb_load_offset          "0x12020000"
gdb_opts                 "-command gdbinit"
gdb_prompt               "\\(gdb960\\)"           The prompt GDB is
                                                  using.
gdb_run_command          "jump start"
gdb_stub_offset          "0x12010000"
use_gdb_stub             1                        Whether to use a GDB
                                                  stub.
use_vma_offset           1
wrap_m68k_aout           1
gcc,no_label_values      1
gcc,no_trampolines       1
gcc,no_varargs           1
gcc,stack_size           16384                    Stack size to use with
                                                  some GCC testcases.
ieee_multilib_flags      "-mieee";
is_simulator             1
needs_status_wrapper     1
no_double                1
no_long_long             1
noargs                   1
nullstone,lib            "mips-clock.c"
nullstone,ticks_per_sec  3782018
sys_speed_value          200
target_install           {sh-hms}


File: dejagnu.info,  Node: Writing A Test Case,  Next: Debugging A Test Case,  Prev: Board File Values,  Up: Extending DejaGnu

6.6 Writing A Test Case
=======================

The easiest way to prepare a new test case is to base it on an existing
one for a similar situation.  There are two major categories of tests:
batch or interactive.  Batch oriented tests are usually easier to write.

   The GCC tests are a good example of batch oriented tests.  All GCC
tests consist primarily of a call to a single common procedure, since
all the tests either have no output, or only have a few warning messages
when successfully compiled.  Any non-warning output is a test failure.
All the C code needed is kept in the test directory.  The test driver,
written in Tcl, need only get a listing of all the C files in the
directory, and compile them all using a generic procedure.  This
procedure and a few others supporting for these tests are kept in the
library module 'lib/c-torture.exp' in the GCC test suite.  Most tests of
this kind use very few expect features, and are coded almost purely in
Tcl.

   Writing the complete suite of C tests, then, consisted of these
steps:

   * Copying all the C code into the test directory.  These tests were
     based on the C-torture test created by Torbjorn Granlund (on behalf
     of the Free Software Foundation) for GCC development.

   * Writing (and debugging) the generic Tcl procedures for compilation.

   * Writing the simple test driver: its main task is to search the
     directory (using the Tcl procedure _glob_ for filename expansion
     with wildcards) and call a Tcl procedure with each filename.  It
     also checks for a few errors from the testing procedure.

   Testing interactive programs is intrinsically more complex.  Tests
for most interactive programs require some trial and error before they
are complete.

   However, some interactive programs can be tested in a simple fashion
reminiscent of batch tests.  For example, prior to the creation of
DejaGnu, the GDB distribution already included a wide-ranging testing
procedure.  This procedure was very robust, and had already undergone
much more debugging and error checking than many recent DejaGnu test
cases.  Accordingly, the best approach was simply to encapsulate the
existing GDB tests, for reporting purposes.  Thereafter, new GDB tests
built up a family of Tcl procedures specialized for GDB testing.


File: dejagnu.info,  Node: Debugging A Test Case,  Next: Adding A Test Case To A Testsuite,  Prev: Writing A Test Case,  Up: Extending DejaGnu

6.7 Debugging A Test Case
=========================

These are the kinds of debugging information available from DejaGnu:

   * Output controlled by test scripts themselves, explicitly allowed
     for by the test author.  This kind of debugging output appears in
     the detailed output recorded in the DejaGnu log file.  To do the
     same for new tests, use the 'verbose' procedure (which in turn uses
     the variable also called _verbose_) to control how much output to
     generate.  This will make it easier for other people running the
     test to debug it if necessary.  Whenever possible, if _$verbose_ is
     _0_, there should be no output other than the output from _pass_,
     _fail_, _error_, and _warning_.  Then, to whatever extent is
     appropriate for the particular test, allow successively higher
     values of _$verbose_ to generate more information.  Be kind to
     other programmers who use your tests: provide for a lot of
     debugging information.

   * Output from the internal debugging functions of Tcl and Expect.
     There is a command line options for each; both forms of debugging
     output are recorded in the file 'dbg.log' in the current directory.

     Use '--debug' for information from the expect level; it generates
     displays of the expect attempts to match the tool output with the
     patterns specified.  This output can be very helpful while
     developing test scripts, since it shows precisely the characters
     received.  Iterating between the latest attempt at a new test
     script and the corresponding 'dbg.log' can allow you to create the
     final patterns by "cut and paste".  This is sometimes the best way
     to write a test case.

   * Use '--strace' to see more detail at the Tcl level; this shows how
     Tcl procedure definitions expand, as they execute.  The associated
     number controls the depth of definitions expanded.

   * Finally, if the value of _verbose_ is 3 or greater, DejaGnu turns
     on the expect command 'log_user'.  This command prints all expect
     actions to the expect standard output, to the detailed log file,
     and (if '--debug' is on) to 'dbg.log'.


File: dejagnu.info,  Node: Adding A Test Case To A Testsuite,  Next: Hints On Writing A Test Case,  Prev: Debugging A Test Case,  Up: Extending DejaGnu

6.8 Adding A Test Case To A Testsuite.
======================================

There are two slightly different ways to add a test case.  One is to add
the test case to an existing directory.  The other is to create a new
directory to hold your test.  The existing test directories represent
several styles of testing, all of which are slightly different; examine
the directories for the tool of interest to see which (if any) is most
suitable.

   Adding a GCC test can be very simple: just add the C code to any
directory beginning with 'gcc' and it runs on the next:

     runtest --tool gcc

   To add a test to GDB, first add any source code you will need to the
test directory.  Then you can either create a new expect file, or add
your test to an existing one (any file with a _.exp_ suffix).  Creating
a new .exp file is probably a better idea if the test is significantly
different from existing tests.  Adding it as a separate file also makes
upgrading easier.  If the C code has to be already compiled before the
test will run, then you'll have to add it to the 'Makefile.in' file for
that test directory, then run 'configure' and 'make'.

   Adding a test by creating a new directory is very similar:

   * Create the new directory.  All subdirectory names begin with the
     name of the tool to test; e.g.  G++ tests might be in a directory
     called 'g++.other'.  There can be multiple test directories that
     start with the same tool name (such as _g++_).

   * Add the new directory name to the 'configdirs' definition in the
     'configure.in' file for the testsuite directory.  This way when
     'make' and 'configure' next run, they include the new directory.

   * Add the new test case to the directory, as above.

   * To add support in the new directory for configure and make, you
     must also create a 'Makefile.in' and a 'configure.in'.


File: dejagnu.info,  Node: Hints On Writing A Test Case,  Next: Test Case Variables,  Prev: Adding A Test Case To A Testsuite,  Up: Extending DejaGnu

6.9 Hints On Writing A Test Case
================================

It is safest to write patterns that match all the output generated by
the tested program; this is called closure.  If a pattern does not match
the entire output, any output that remains will be examined by the next
'expect' command.  In this situation, the precise boundary that
determines which 'expect' command sees what is very sensitive to timing
between the Expect task and the task running the tested tool.  As a
result, the test may sometimes appear to work, but is likely to have
unpredictable results.  (This problem is particularly likely for
interactive tools, but can also affect batch tools--especially for tests
that take a long time to finish.)  The best way to ensure closure is to
use the '-re' option for the 'expect' command to write the pattern as a
full regular expressions; then you can match the end of output using a
_$_.  It is also a good idea to write patterns that match all available
output by using _.*\_ after the text of interest; this will also match
any intervening blank lines.  Sometimes an alternative is to match end
of line using _\r_ or _\n_, but this is usually too dependent on
terminal settings.

   Always escape punctuation, such as _(_ or _"_, in your patterns; for
example, write _\(_.  If you forget to escape punctuation, you will
usually see an error message like:

     extra characters after close-quote

   If you have trouble understanding why a pattern does not match the
program output, try using the '--debug' option to 'runtest', and examine
the debug log carefully.

   Be careful not to neglect output generated by setup rather than by
the interesting parts of a test case.  For example, while testing GDB, I
issue a send _set height 0\n_ command.  The purpose is simply to make
sure GDB never calls a paging program.  The _set height_ command in GDB
does not generate any output; but running any command makes GDB issue a
new _(gdb) _ prompt.  If there were no 'expect' command to match this
prompt, the output _(gdb) _ begins the text seen by the next 'expect'
command--which might make that pattern fail to match.

   To preserve basic sanity, I also recommended that no test ever pass
if there was any kind of problem in the test case.  To take an extreme
case, tests that pass even when the tool will not spawn are misleading.
Ideally, a test in this sort of situation should not fail either.
Instead, print an error message by calling one of the DejaGnu procedures
'error' or 'warning'.


File: dejagnu.info,  Node: Test Case Variables,  Prev: Hints On Writing A Test Case,  Up: Extending DejaGnu

6.10 Special variables used by test cases.
==========================================

There are special variables used by test cases.  These contain other
information from DejaGnu.  Your test cases can use these variables, with
conventional meanings (as well as the variables saved in 'site.exp'.
You can use the value of these variables, but they should never be
changed.

$prms_id
     The tracking system (e.g.  GNATS) number identifying a
     corresponding bugreport.  (_0_ if you do not specify it in the test
     script.)

$item bug_id
     An optional bug id; may reflect a bug identification from another
     organization.  (_0_ if you do not specify it.)

$subdir
     The subdirectory for the current test case.

$expect_out(buffer)
     The output from the last command.  This is an internal variable set
     by Expect.  More information can be found in the Expect manual.

$exec_output
     This is the output from a '${tool}_load' command.  This only
     applies to tools like GCC and GAS which produce an object file that
     must in turn be executed to complete a test.

$comp_output
     This is the output from a '${tool}_start' command.  This is
     conventionally used for batch oriented programs, like GCC and GAS,
     that may produce interesting output (warnings, errors) without
     further interaction.


File: dejagnu.info,  Node: Unit Testing,  Next: Reference,  Prev: Extending DejaGnu,  Up: Top

7 Unit Testing
**************

* Menu:

* What Is Unit Testing ?::
* The dejagnu.h Header File: The dejagnu_h Header File.


File: dejagnu.info,  Node: What Is Unit Testing ?,  Next: The dejagnu_h Header File,  Up: Unit Testing

7.1 What Is Unit Testing ?
==========================

Most regression testing as done by DejaGnu is system testing.  This is
the complete application is tested all at once.  Unit testing is for
testing single files, or small libraries.  In this case, each file is
linked with a test case in C or C++, and each function or class and
method is tested in series, with the test case having to check private
data or global variables to see if the function or method worked.

   This works particularly well for testing APIs and at level where it
is easier to debug them, than by needing to trace through the entire
application.  Also if there is a specification for the API to be tested,
the testcase can also function as a compliance test.


File: dejagnu.info,  Node: The dejagnu_h Header File,  Prev: What Is Unit Testing ?,  Up: Unit Testing

7.2 The dejagnu.h Header File
=============================

DejaGnu uses a single header file to assist in unit testing.  As this
file also produces its one test state output, it can be run stand-alone,
which is very useful for testing on embedded systems.  This header file
has a C and C++ API for the test states, with simple totals, and
standardized output.  Because the output has been standardized, DejaGnu
can be made to work with this test case, without writing almost any Tcl.
The library module, dejagnu.exp, will look for the output messages, and
then merge them into DejaGnu's.


File: dejagnu.info,  Node: Reference,  Next: Unit Testing API,  Prev: Unit Testing,  Up: Top

8 Reference
***********

* Menu:

* Obtaining DejaGnu::
* Installation::
* Builtin Procedures::
* File Map::


File: dejagnu.info,  Node: Obtaining DejaGnu,  Next: Installation,  Up: Reference

8.1 Obtaining DejaGnu
=====================

You can obtain DejaGnu from the DejaGnu web site at the Free Software
Foundation (http://www.gnu.org), which is at
www.gnu.org/software/dejagnu/ (http://www.gnu.org/software/dejagnu/)


File: dejagnu.info,  Node: Installation,  Next: Builtin Procedures,  Prev: Obtaining DejaGnu,  Up: Reference

8.2 Installation
================

Once you have the DejaGnu source unpacked and available, you must first
configure the software to specify where it is to run (and the associated
defaults); then you can proceed to installing it.

* Menu:

* Configuring DejaGnu::
* Installing DejaGnu::


File: dejagnu.info,  Node: Configuring DejaGnu,  Next: Installing DejaGnu,  Up: Installation

8.2.1 Configuring DejaGnu
-------------------------

It is usually best to configure in a directory separate from the source
tree, specifying where to find the source with the optional '--srcdir'
option to _configure_.  DejaGnu uses the GNU _autoconf_ to configure
itself.  For more info on using autoconf, read the GNU autoconf manual.
To configure, execute the 'configure' program, no other options are
required.  For an example, to configure in a separate tree for objects,
execute the configure script from the source tree like this:


             ../dejagnu-1.5.1/configure


   DejaGnu doesn't care at config time if it's for testing a native
system or a cross system.  That is determined at runtime by using the
config files.

   You may also want to use the 'configure' option '--prefix' to specify
where you want DejaGnu and its supporting code installed.  By default,
installation is in subdirectories of '/usr/local', but you can select
any alternate directory 'altdir' by including '--prefix altdir' on the
'configure' command line.  (This value is captured in the Makefile
variables _prefix_ and _exec_prefix_.)

   Save for a small number of example tests, the DejaGnu distribution
itself does not include any testsuites; these are available separately.
Testsuites for the GNU development tools are included in those releases.
After configuring the top-level DejaGnu directory, unpack and configure
the test directories for the tools you want to test; then, in each test
directory, run _make check_ to build auxiliary programs required by some
of the tests, and run the test suites.


File: dejagnu.info,  Node: Installing DejaGnu,  Prev: Configuring DejaGnu,  Up: Installation

8.2.2 Installing DejaGnu
------------------------

To install DejaGnu in your file system (either in '/usr/local', or as
specified by your '--prefix' option to _configure_), execute.


             eg$ make install


   _make install_does these things for DejaGnu:

   * Look in the path specified for executables '$exec_prefix') for
     directories called 'lib' and 'bin'.  If these directories do not
     exist, _make install_ creates them.

   * Create another directory in the 'share' directory, called
     'dejagnu', and copy all the library files into it.

   * Create a directory in the 'dejagnu/share' directory, called
     'config', and copy all the configuration files into it.

   * Copy the _runtest_ shell script into '$exec_prefix/bin'.

   * Copy 'runtest.exp' into '$exec_prefix/lib/dejagnu'.  This is the
     main Tcl code implementing DejaGnu.


File: dejagnu.info,  Node: Builtin Procedures,  Next: File Map,  Prev: Installation,  Up: Reference

8.3 Builtin Procedures
======================

DejaGnu provides these Tcl procedures.

* Menu:

* Core Internal Procedures::
* Procedures For Remote Communication::
* Procedures For Using Utilities to Connect: connprocs.
* Procedures For Target Boards::
* Target Database Procedures: target database library file.
* Platform Dependent Procedures: platform dependent procedures.
* Utility Procedures::
* Libgloss, A Free BSP: Libgloss.
* Procedures for debugging your Tcl code.: Debugging Procedures.


File: dejagnu.info,  Node: Core Internal Procedures,  Next: Procedures For Remote Communication,  Up: Builtin Procedures

8.3.1 Core Internal Procedures
------------------------------

* Menu:

* Mail_file Procedure: mail_file procedure.
* Open_logs Procedure: open_logs procedure.
* Close_logs Procedure: close_logs procedure.
* Isbuild Procedure: isbuild procedure.
* Is_remote Procedure: is_remote procedure.
* is3way Procedure: is3way procedure.
* Ishost Procedure: ishost procedure.
* Istarget Procedure: istarget procedure.
* Isnative Procedure: isnative procedure.
* Unknown Procedure: unknown procedure.
* Clone_output Procedure: clone_output procedure.
* Reset_vars Procedure: reset_vars procedure.
* Log_and_exit Procedure: log_and_exit procedure.
* Log_summary Procedure: log_summary procedure.
* Cleanup Procedure: cleanup procedure.
* Setup_xfail Procedure: setup_xfail procedure.
* Record_test Procedure: record_test procedure.
* Pass Procedure: pass procedure.
* Fail Procedure: fail procedure.
* Xpass Procedure: xpass procedure.
* Xfail Procedure: xfail procedure.
* Set_warning_threshold Procedure: set_warning_threshold procedure.
* Get_warning_threshold Procedure: get_warning_threshold procedure.
* Warning Procedure: warning procedure.
* Perror Procedure: perror procedure.
* Note Procedure: note procedure.
* Untested Procedure: untested procedure.
* Unresolved Procedure: unresolved procedure.
* Unsupported Procedure: unsupported procedure.
* Init_testcounts Procedure: init_testcounts procedure.
* Incr_count Procedure: incr_count procedure.
* transform Procedure: transform procedure.
* Check_conditional_xfail Procedure: check_conditional_xfail procedure.
* Clear_xfail Procedure: clear_xfail procedure.
* Verbose Procedure: verbose procedure.
* Load_lib Procedure: load_lib procedure.


File: dejagnu.info,  Node: mail_file procedure,  Next: open_logs procedure,  Up: Core Internal Procedures

8.3.1.1 Mail_file Procedure
...........................

     mail_file(file to subject);

''


File: dejagnu.info,  Node: open_logs procedure,  Next: close_logs procedure,  Prev: mail_file procedure,  Up: Core Internal Procedures

8.3.1.2 Open_logs Procedure
...........................

     open_logs();


File: dejagnu.info,  Node: close_logs procedure,  Next: isbuild procedure,  Prev: open_logs procedure,  Up: Core Internal Procedures

8.3.1.3 Close_logs Procedure
............................

     close_logs();


File: dejagnu.info,  Node: isbuild procedure,  Next: is_remote procedure,  Prev: close_logs procedure,  Up: Core Internal Procedures

8.3.1.4 Isbuild Procedure
.........................

Tests for a particular build host environment.  If the currently
configured host matches the argument string, the result is _1_;
otherwise the result is _0_.  _host_ must be a full three-part configure
host name; in particular, you may not use the shorter nicknames
supported by configure (but you can use wildcard characters, using shell
syntax, to specify sets of names).  If it is passed a NULL string, then
it returns the name of the build canonical configuration.

     isbuild(pattern);

'pattern'


File: dejagnu.info,  Node: is_remote procedure,  Next: is3way procedure,  Prev: isbuild procedure,  Up: Core Internal Procedures

8.3.1.5 Is_remote Procedure
...........................

     is_remote(board);

''


File: dejagnu.info,  Node: is3way procedure,  Next: ishost procedure,  Prev: is_remote procedure,  Up: Core Internal Procedures

8.3.1.6 is3way Procedure
........................

Tests for a Canadian cross.  This is when the tests will be run on a
remotely hosted cross compiler.  If it is a Canadian cross, then the
result is _1_; otherwise the result is _0_.

     is3way();


File: dejagnu.info,  Node: ishost procedure,  Next: istarget procedure,  Prev: is3way procedure,  Up: Core Internal Procedures

8.3.1.7 Ishost Procedure
........................

Tests for a particular host environment.  If the currently configured
host matches the argument string, the result is _1_; otherwise the
result is _0_.  _host_ must be a full three-part configure host name; in
particular, you may not use the shorter nicknames supported by configure
(but you can use wildcard characters, using shell syntax, to specify
sets of names).

     ishost(pattern);

''


File: dejagnu.info,  Node: istarget procedure,  Next: isnative procedure,  Prev: ishost procedure,  Up: Core Internal Procedures

8.3.1.8 Istarget Procedure
..........................

Tests for a particular target environment.  If the currently configured
target matches the argument string, the result is _1_ ; otherwise the
result is _0_.  target must be a full three-part configure target name;
in particular, you may not use the shorter nicknames supported by
configure (but you can use wildcard characters, using shell syntax, to
specify sets of names).  If it is passed a _NULL_ string, then it
returns the name of the build canonical configuration.

     istarget(args);

''


File: dejagnu.info,  Node: isnative procedure,  Next: unknown procedure,  Prev: istarget procedure,  Up: Core Internal Procedures

8.3.1.9 Isnative Procedure
..........................

Tests whether the current configuration has the same host and target.
When it runs in a native configuration this procedure returns a _1_;
otherwise it returns a _0_.

     isnative();


File: dejagnu.info,  Node: unknown procedure,  Next: clone_output procedure,  Prev: isnative procedure,  Up: Core Internal Procedures

8.3.1.10 Unknown Procedure
..........................

     unknown(args);

'args'


File: dejagnu.info,  Node: clone_output procedure,  Next: reset_vars procedure,  Prev: unknown procedure,  Up: Core Internal Procedures

8.3.1.11 Clone_output Procedure
...............................

     clone_output(message);

'message'


File: dejagnu.info,  Node: reset_vars procedure,  Next: log_and_exit procedure,  Prev: clone_output procedure,  Up: Core Internal Procedures

8.3.1.12 Reset_vars Procedure
.............................

     reset_vars();


File: dejagnu.info,  Node: log_and_exit procedure,  Next: log_summary procedure,  Prev: reset_vars procedure,  Up: Core Internal Procedures

8.3.1.13 Log_and_exit Procedure
...............................

     log_and_exit();


File: dejagnu.info,  Node: log_summary procedure,  Next: cleanup procedure,  Prev: log_and_exit procedure,  Up: Core Internal Procedures

8.3.1.14 Log_summary Procedure
..............................

     log_summary(args);

'args'


File: dejagnu.info,  Node: cleanup procedure,  Next: setup_xfail procedure,  Prev: log_summary procedure,  Up: Core Internal Procedures

8.3.1.15 Cleanup Procedure
..........................

     cleanup();


File: dejagnu.info,  Node: setup_xfail procedure,  Next: record_test procedure,  Prev: cleanup procedure,  Up: Core Internal Procedures

8.3.1.16 Setup_xfail Procedure
..............................

Declares that the test is expected to fail on a particular set of
configurations.  The config argument must be a list of full three-part
configure target name; in particular, you may not use the shorter
nicknames supported by configure (but you can use the common shell
wildcard characters to specify sets of names).  The _bugid_ argument is
optional, and used only in the logging file output; use it as a link to
a bug-tracking system such as GNATS.

   Once you use 'setup_xfail', the 'fail' and 'pass' procedures produce
the messages _XFAIL_ and _XPASS_ respectively, allowing you to
distinguish expected failures (and unexpected success!)  from other test
outcomes.

     *Warning*

     Warning you must clear the expected failure after using setup_xfail
     in a test case.  Any call to 'pass 'or 'fail' clears the expected
     failure implicitly; if the test has some other outcome, e.g.  an
     error, you can call 'clear_xfail' to clear the expected failure
     explicitly.  Otherwise, the expected-failure declaration applies to
     whatever test runs next, leading to surprising results.

     setup_xfail(config bugid);

'config'
     The config triplet to trigger whether this is an unexpected or
     expect failure.

'bugid'
     The optional bugid, used to tie this test case to a bug tracking
     system.


File: dejagnu.info,  Node: record_test procedure,  Next: pass procedure,  Prev: setup_xfail procedure,  Up: Core Internal Procedures

8.3.1.17 Record_test Procedure
..............................

     record_test(type message args);

'type'

'message'

'args'


File: dejagnu.info,  Node: pass procedure,  Next: fail procedure,  Prev: record_test procedure,  Up: Core Internal Procedures

8.3.1.18 Pass Procedure
.......................

Declares a test to have passed.  'pass' writes in the log files a
message beginning with _PASS_ (or _XPASS_, if failure was expected),
appending the argument 'string'.

     pass(string);

'string'
     The string to use for this PASS message.


File: dejagnu.info,  Node: fail procedure,  Next: xpass procedure,  Prev: pass procedure,  Up: Core Internal Procedures

8.3.1.19 Fail Procedure
.......................

Declares a test to have failed.  'fail' writes in the log files a
message beginning with _FAIL_ (or _XFAIL_, if failure was expected),
appending the argument 'string'.

     fail(string);

'string'
     The string to use for this FAIL message.


File: dejagnu.info,  Node: xpass procedure,  Next: xfail procedure,  Prev: fail procedure,  Up: Core Internal Procedures

8.3.1.20 Xpass Procedure
........................

Declares a test to have unexpectedly passed, when it was expected to be
a failure.  'xpass' writes in the log files a message beginning with
_XPASS_ (or _XFAIL_, if failure was expected), appending the argument
'string'.

     xpass(string);

'string'
     The string to use for this output state.


File: dejagnu.info,  Node: xfail procedure,  Next: set_warning_threshold procedure,  Prev: xpass procedure,  Up: Core Internal Procedures

8.3.1.21 Xfail Procedure
........................

Declares a test to have expectedly failed.  'xfail' writes in the log
files a message beginning with _XFAIL_ (or _PASS_, if success was
expected), appending the argument 'string'.

     xpass(string);

'string'
     The string to use for this output state.


File: dejagnu.info,  Node: set_warning_threshold procedure,  Next: get_warning_threshold procedure,  Prev: xfail procedure,  Up: Core Internal Procedures

8.3.1.22 Set_warning_threshold Procedure
........................................

Sets the value of 'warning_threshold'.  A value of _0_ disables it:
calls to 'warning' will not turn a _PASS_ or _FAIL_ into an
_UNRESOLVED_.

     set_warning_threshold(threshold);

'threshold'
     This is the value of the new warning threshold.


File: dejagnu.info,  Node: get_warning_threshold procedure,  Next: warning procedure,  Prev: set_warning_threshold procedure,  Up: Core Internal Procedures

8.3.1.23 Get_warning_threshold Procedure
........................................

Returns the current value of '{warning_threshold'.  The default value is
3.  This value controls how many 'warning' procedures can be called
before becoming _UNRESOLVED_.

     get_warning_threshold();


File: dejagnu.info,  Node: warning procedure,  Next: perror procedure,  Prev: get_warning_threshold procedure,  Up: Core Internal Procedures

8.3.1.24 Warning Procedure
..........................

Declares detection of a minor error in the test case itself.  'warning'
writes in the log files a message beginning with _WARNING_, appending
the argument 'string'.  Use 'warning' rather than 'perror' for cases
(such as communication failure to be followed by a retry) where the test
case can recover from the error.  If the optional 'number' is supplied,
then this is used to set the internal count of warnings to that value.

   As a side effect, 'warning_threshold' or more calls to warning in a
single test case also changes the effect of the next 'pass' or 'fail'
command: the test outcome becomes _UNRESOLVED_ since an automatic _PASS_
or _FAIL_ may not be trustworthy after many warnings.  If the optional
numeric value is _0_, then there are no further side effects to calling
this function, and the following test outcome doesn't become
_UNRESOLVED_. This can be used for errors with no known side effects.

     warning(string number );

'string'

'number'
     The optional number to set the error counter.  This is only used to
     fake out the counter when using the 'xfail' procedure to control
     when it flips the output over to _UNRESOLVED_ state.


File: dejagnu.info,  Node: perror procedure,  Next: note procedure,  Prev: warning procedure,  Up: Core Internal Procedures

8.3.1.25 Perror Procedure
.........................

Declares a severe error in the testing framework itself.  'perror'
writes in the log files a message beginning with _ERROR_, appending the
argument 'string'.

   As a side effect, perror also changes the effect of the next 'pass'
or 'fail' command: the test outcome becomes _UNRESOLVED_, since an
automatic _PASS_ or _FAIL_ cannot be trusted after a severe error in the
test framework.  If the optional numeric value is _0_, then there are no
further side effects to calling this function, and the following test
outcome doesn't become _UNRESOLVED_. This can be used for errors with no
known side effects.

     perror(string number );

'string'

'number'
     The optional number to set the error counter.  This is only used to
     fake out the counter when using the 'xfail' procedure to control
     when it flips the output over to _UNRESOLVED_ state.


File: dejagnu.info,  Node: note procedure,  Next: untested procedure,  Prev: perror procedure,  Up: Core Internal Procedures

8.3.1.26 Note Procedure
.......................

Appends an informational message to the log file.  'note' writes in the
log files a message beginning with _NOTE_, appending the argument
'string'.  Use 'note' sparingly.  The 'verbose' should be used for most
such messages, but in cases where a message is needed in the log file
regardless of the verbosity level use 'note'.

     note(string);

'string'
     The string to use for this note.


File: dejagnu.info,  Node: untested procedure,  Next: unresolved procedure,  Prev: note procedure,  Up: Core Internal Procedures

8.3.1.27 Untested Procedure
...........................

Declares a test was not run.  'untested' writes in the log file a
message beginning with _UNTESTED_, appending the argument _string_.  For
example, you might use this in a dummy test whose only role is to record
that a test does not yet exist for some feature.

     untested(string);

'string'
     The string to use for this output state.


File: dejagnu.info,  Node: unresolved procedure,  Next: unsupported procedure,  Prev: untested procedure,  Up: Core Internal Procedures

8.3.1.28 Unresolved Procedure
.............................

Declares a test to have an unresolved outcome.  'unresolved' writes in
the log file a message beginning with _UNRESOLVED_, appending the
argument _string_.  This usually means the test did not execute as
expected, and a human being must go over results to determine if it
passed or failed (and to improve the test case).

     unresolved(string);

'string'
     The string to use for this output state.


File: dejagnu.info,  Node: unsupported procedure,  Next: init_testcounts procedure,  Prev: unresolved procedure,  Up: Core Internal Procedures

8.3.1.29 Unsupported Procedure
..............................

Declares that a test case depends on some facility that does not exist
in the testing environment.  'unsupported' writes in the log file a
message beginning with _UNSUPPORTED_, appending the argument string.

     unsupported(string);

'string'
     The string to use for this output state.


File: dejagnu.info,  Node: init_testcounts procedure,  Next: incr_count procedure,  Prev: unsupported procedure,  Up: Core Internal Procedures

8.3.1.30 Init_testcounts Procedure
..................................

     init_testcounts();


File: dejagnu.info,  Node: incr_count procedure,  Next: transform procedure,  Prev: init_testcounts procedure,  Up: Core Internal Procedures

8.3.1.31 Incr_count Procedure
.............................

     incr_count(name args);

'name'

'args'


File: dejagnu.info,  Node: transform procedure,  Next: check_conditional_xfail procedure,  Prev: incr_count procedure,  Up: Core Internal Procedures

8.3.1.32 transform Procedure
............................

Generates a string for the name of a tool as it was configured and
installed, given its native name (as the argument 'toolname').  This
makes the assumption that all tools are installed using the same naming
conventions: For example, for a cross compiler supporting the
_m68k-vxworks_ configuration, the result of transform 'gcc' is
'm68k-vxworks-gcc'.

     transform(toolname);

'toolname'
     The name of the cross-development program to transform.


File: dejagnu.info,  Node: check_conditional_xfail procedure,  Next: clear_xfail procedure,  Prev: transform procedure,  Up: Core Internal Procedures

8.3.1.33 Check_conditional_xfail Procedure
..........................................

This procedure adds a conditional xfail, based on compiler options used
to create a test case executable.  If an include options is found in the
compiler flags, and it's the right architecture, it'll trigger an
_XFAIL_. Otherwise it'll produce an ordinary _FAIL_. You can also
specify flags to exclude.  This makes a result be a _FAIL_, even if the
included options are found.  To set the conditional, set the variable
'compiler_conditional_xfail_data' to the fields


     	  "[message string] [targets list] [includes list] [excludes list]"


   (descriptions below).  This is the checked at pass/fail decision
time, so there is no need to call the procedure yourself, unless you
wish to know if it gets triggered.  After a pass/fail, the variable is
reset, so it doesn't effect other tests.  It returns _1_ if the
conditional is true, or _0_ if the conditional is false.

     check_conditional_xfail(message targets includes excludes);

'message'
     This is the message to print with the normal test result.

'targets'
     This is a string with the list targets to activate this conditional
     on.

'includes'
     This is a list of sets of options to search for in the compiler
     options to activate this conditional.  If the list of sets of
     options is empty or if any set of the options matches, then this
     conditional is true.  (It may be useful to specify an empty list of
     include sets if the conditional is always true unless one of the
     exclude sets matches.)

'excludes'
     This is a list of sets of options to search for in the compiler
     options to activate this conditional.  If any set of the options
     matches, (regardless of whether any of the include sets match) then
     this conditional is de-activated.

   *Specifying the conditional xfail data*


     	  set compiler_conditional_xfail_data { \
     	       "I sure wish I knew why this was hosed" \
                    "sparc*-sun*-* *-pc-*-*" \
                    {"-Wall -v" "-O3"} \
                    {"-O1" "-Map"} \
               }


   What this does is it matches only for these two targets if "-Wall -v"
or "-O3" is set, but neither "-O1" or "-Map" is set.  For a set to
match, the options specified are searched for independently of each
other, so a "-Wall -v" matches either "-Wall -v" or "-v -Wall".  A space
separates the options in the string.  Glob-style regular expressions are
also permitted.


File: dejagnu.info,  Node: clear_xfail procedure,  Next: verbose procedure,  Prev: check_conditional_xfail procedure,  Up: Core Internal Procedures

8.3.1.34 Clear_xfail Procedure
..............................

Cancel an expected failure (previously declared with 'setup_xfail') for
a particular set of configurations.  The 'config' argument is a list of
configuration target names.  It is only necessary to call 'clear_xfail'
if a test case ends without calling either 'pass' or 'fail', after
calling 'setup_xfail'.

     clear_xfail(config);

'config'
     The configuration triplets to clear.


File: dejagnu.info,  Node: verbose procedure,  Next: load_lib procedure,  Prev: clear_xfail procedure,  Up: Core Internal Procedures

8.3.1.35 Verbose Procedure
..........................

Test cases can use this function to issue helpful messages depending on
the number of '--verbose' options on the runtest command line.  It
prints string if the value of the variable 'verbose' is higher than or
equal to the optional number.  The default value for number is _1_.  Use
the optional '-log' argument to cause string to always be added to the
log file, even if it won't be printed.  Use the optional '-x' argument
to log the test results into a parsable XML file.  Use the optional '-n'
argument to print string without a trailing newline.  Use the optional
'--' argument if string begins with "-".

     verbose(-log -x -n -r string number);

'-x'

'-log'

'-n'

'--'

'string'

'number'


File: dejagnu.info,  Node: load_lib procedure,  Prev: verbose procedure,  Up: Core Internal Procedures

8.3.1.36 Load_lib Procedure
...........................

Loads a DejaGnu library file by searching the default fixed paths built
into DejaGnu.  If DejaGnu has been installed, it looks in a path
starting with the installed library directory.  If you are running
DejaGnu directly from a source directory, without first running 'make
install', this path defaults to the current directory.  In either case,
it then looks in the current directory for a directory called 'lib'.  If
there are duplicate definitions, the last one loaded takes precedence
over the earlier ones.

     load_lib(filespec);

'filespec'
     The name of the DejaGnu library file to load.

   The global variable 'libdirs', handled as a list, is appended to the
default fixed paths built into DejaGnu.

   *Additional search directories for load_lib*

     # append a non-standard search path
     	    global libdirs
     	    lappend libdirs $srcdir/../../gcc/testsuite/lib
     	    # now loading $srcdir/../../gcc/testsuite/lib/foo.exp works
     	    load_lib foo.exp


File: dejagnu.info,  Node: Procedures For Remote Communication,  Next: connprocs,  Prev: Core Internal Procedures,  Up: Builtin Procedures

8.3.2 Procedures For Remote Communication
-----------------------------------------

'lib/remote.exp' defines these functions, for establishing and managing
communications.  Each of these procedures tries to establish the
connection up to three times before returning.  Warnings (if retries
will continue) or errors (if the attempt is abandoned) report on
communication failures.  The result for any of these procedures is
either _-1_, when the connection cannot be established, or the spawn ID
returned by the Expect command 'spawn'.

   It use the value of the 'connect' field in the 'target_info' array
(was 'connectmode' as the type of connection to make.  Current supported
connection types are tip, kermit, telnet, rsh, rlogin, and netdata.  If
the '--reboot' option was used on the runtest command line, then the
target is rebooted before the connection is made.

* Menu:

* Call_remote Procedure: call_remote procedure.
* Check_for_board_status Procedure: check_for_board_status procedure.
* File_on_build Procedure: file_on_build procedure.
* File_on_host Procedure: file_on_host procedure.
* Local_exec Procedure: local_exec procedure.
* Remote_binary Procedure: remote_binary procedure.
* Remote_close Procedure: remote_close procedure.
* Remote_download Procedure: remote_download procedure.
* Remote_exec Procedure: remote_exec procedure.
* Remote_expect Procedure: remote_expect procedure.
* Remote_file Procedure: remote_file procedure.
* Remote_ld Procedure: remote_ld procedure.
* Remote_load Procedure: remote_load procedure.
* Remote_open Procedure: remote_open procedure.
* Remote_pop_conn Procedure: remote_pop_conn procedure.
* Remote_push_conn Procedure: remote_push_conn procedure.
* Remote_raw_binary Procedure: remote_raw_binary procedure.
* Remote_raw_close Procedure: remote_raw_close procedure.
* Remote_raw_file Procedure: remote_raw_file procedure.
* remote_raw_ld Procedure: remote_raw_ld procedure.
* Remote_raw_load Procedure: remote_raw_load procedure.
* Remote_raw_open Procedure: remote_raw_open procedure.
* Remote_raw_send Procedure: remote_raw_send procedure.
* Remote_raw_spawn Procedure: remote_raw_spawn procedure.
* Remote_raw_transmit Procedure: remote_raw_transmit procedure.
* Remote_raw_wait Procedure: remote_raw_wait procedure.
* Remote_reboot Procedure: remote_reboot procedure.
* Remote_send Procedure: remote_send procedure.
* Remote_spawn Procedure: remote_spawn procedure.
* Remote_swap_conn Procedure: remote_swap_conn procedure.
* Remote_transmit Procedure: remote_transmit procedure.
* Remote_upload Procedure: remote_upload procedure.
* Remote_wait Procedure: remote_wait procedure.
* Standard_close Procedure: standard_close procedure.
* Standard_download Procedure: standard_download procedure.
* Standard_exec Procedure: standard_exec procedure.
* Standard_file Procedure: standard_file procedure.
* Standard_load Procedure: standard_load procedure.
* Standard_reboot Procedure: standard_reboot procedure.
* Standard_send Procedure: standard_send procedure.
* Standard_spawn Procedure: standard_spawn procedure.
* Standard_transmit Procedure: standard_transmit procedure.
* Standard_upload Procedure: standard_upload procedure.
* Standard_wait Procedure: standard_wait procedure.
* Unix_clean_filename Procedure: unix_clean_filename procedure.


File: dejagnu.info,  Node: call_remote procedure,  Next: check_for_board_status procedure,  Up: Procedures For Remote Communication

8.3.2.1 Call_remote Procedure
.............................

     call_remote(type proc dest args);

'proc'

'dest'

'args'


File: dejagnu.info,  Node: check_for_board_status procedure,  Next: file_on_build procedure,  Prev: call_remote procedure,  Up: Procedures For Remote Communication

8.3.2.2 Check_for_board_status Procedure
........................................

     check_for_board_status(variable);

'variable'


File: dejagnu.info,  Node: file_on_build procedure,  Next: file_on_host procedure,  Prev: check_for_board_status procedure,  Up: Procedures For Remote Communication

8.3.2.3 File_on_build Procedure
...............................

     file_on_build(op file args);

'op'

'file'

'args'


File: dejagnu.info,  Node: file_on_host procedure,  Next: local_exec procedure,  Prev: file_on_build procedure,  Up: Procedures For Remote Communication

8.3.2.4 File_on_host Procedure
..............................

     file_on_host(op file args);

'op'

'file'

'args'


File: dejagnu.info,  Node: local_exec procedure,  Next: remote_binary procedure,  Prev: file_on_host procedure,  Up: Procedures For Remote Communication

8.3.2.5 Local_exec Procedure
............................

     local_exec(commandline inp outp timeout);

'inp'

'outp'

'timeout'


File: dejagnu.info,  Node: remote_binary procedure,  Next: remote_close procedure,  Prev: local_exec procedure,  Up: Procedures For Remote Communication

8.3.2.6 Remote_binary Procedure
...............................

     remote_binary(host);

'host'


File: dejagnu.info,  Node: remote_close procedure,  Next: remote_download procedure,  Prev: remote_binary procedure,  Up: Procedures For Remote Communication

8.3.2.7 Remote_close Procedure
..............................

     remote_close(shellid);

'shellid'
     This is the value returned by a call to 'remote_open'.  This closes
     the connection to the target so resources can be used by others.
     This parameter can be left off if the 'fileid' field in the
     'target_info' array is set.


File: dejagnu.info,  Node: remote_download procedure,  Next: remote_exec procedure,  Prev: remote_close procedure,  Up: Procedures For Remote Communication

8.3.2.8 Remote_download Procedure
.................................

     remote_download(dest file args);

'dest'

'file'

'args'


File: dejagnu.info,  Node: remote_exec procedure,  Next: remote_expect procedure,  Prev: remote_download procedure,  Up: Procedures For Remote Communication

8.3.2.9 Remote_exec Procedure
.............................

     remote_exec(hostname program args);

'hostname'

'program'

'args'


File: dejagnu.info,  Node: remote_expect procedure,  Next: remote_file procedure,  Prev: remote_exec procedure,  Up: Procedures For Remote Communication

8.3.2.10 Remote_expect Procedure
................................

     remote_expect(board timeout args);

'board'

'timeout'

'args'


File: dejagnu.info,  Node: remote_file procedure,  Next: remote_ld procedure,  Prev: remote_expect procedure,  Up: Procedures For Remote Communication

8.3.2.11 Remote_file Procedure
..............................

     remote_file(dest args);

'dest'

'args'


File: dejagnu.info,  Node: remote_ld procedure,  Next: remote_load procedure,  Prev: remote_file procedure,  Up: Procedures For Remote Communication

8.3.2.12 Remote_ld Procedure
............................

     remote_ld(dest prog);

'dest'

'prog'


File: dejagnu.info,  Node: remote_load procedure,  Next: remote_open procedure,  Prev: remote_ld procedure,  Up: Procedures For Remote Communication

8.3.2.13 Remote_load Procedure
..............................

     remote_load(dest prog args);

'dest'

'prog'

'args'


File: dejagnu.info,  Node: remote_open procedure,  Next: remote_pop_conn procedure,  Prev: remote_load procedure,  Up: Procedures For Remote Communication

8.3.2.14 Remote_open Procedure
..............................

     remote_open(type);

'type'
     This is passed 'host' or 'target'.  Host or target refers to
     whether it is a connection to a remote target, or a remote host.
     This opens the connection to the desired target or host using the
     default values in the configuration system.  It returns that
     'spawn_id' of the process that manages the connection.  This value
     can be used in Expect or 'exp_send' statements, or passed to other
     procedures that need the connection process's id.  This also sets
     the 'fileid' field in the 'target_info' array.


File: dejagnu.info,  Node: remote_pop_conn procedure,  Next: remote_push_conn procedure,  Prev: remote_open procedure,  Up: Procedures For Remote Communication

8.3.2.15 Remote_pop_conn Procedure
..................................

     remote_pop_conn(host);

'host'


File: dejagnu.info,  Node: remote_push_conn procedure,  Next: remote_raw_binary procedure,  Prev: remote_pop_conn procedure,  Up: Procedures For Remote Communication

8.3.2.16 Remote_push_conn Procedure
...................................

     remote_push_conn(host);

'host'


File: dejagnu.info,  Node: remote_raw_binary procedure,  Next: remote_raw_close procedure,  Prev: remote_push_conn procedure,  Up: Procedures For Remote Communication

8.3.2.17 Remote_raw_binary Procedure
....................................

     remote_raw_binary(host);

'host'


File: dejagnu.info,  Node: remote_raw_close procedure,  Next: remote_raw_file procedure,  Prev: remote_raw_binary procedure,  Up: Procedures For Remote Communication

8.3.2.18 Remote_raw_close Procedure
...................................

     remote_raw_close(host);

'host'


File: dejagnu.info,  Node: remote_raw_file procedure,  Next: remote_raw_ld procedure,  Prev: remote_raw_close procedure,  Up: Procedures For Remote Communication

8.3.2.19 Remote_raw_file Procedure
..................................

     remote_raw_file(dest args);

'dest'

'args'


File: dejagnu.info,  Node: remote_raw_ld procedure,  Next: remote_raw_load procedure,  Prev: remote_raw_file procedure,  Up: Procedures For Remote Communication

8.3.2.20 remote_raw_ld Procedure
................................

     remote_raw_ld(dest prog);

'dest'

'prog'


File: dejagnu.info,  Node: remote_raw_load procedure,  Next: remote_raw_open procedure,  Prev: remote_raw_ld procedure,  Up: Procedures For Remote Communication

8.3.2.21 Remote_raw_load Procedure
..................................

     remote_raw_load(dest prog args);

'dest'

'prog'

'args'


File: dejagnu.info,  Node: remote_raw_open procedure,  Next: remote_raw_send procedure,  Prev: remote_raw_load procedure,  Up: Procedures For Remote Communication

8.3.2.22 Remote_raw_open Procedure
..................................

     remote_raw_open(args);

'args'


File: dejagnu.info,  Node: remote_raw_send procedure,  Next: remote_raw_spawn procedure,  Prev: remote_raw_open procedure,  Up: Procedures For Remote Communication

8.3.2.23 Remote_raw_send Procedure
..................................

     remote_raw_send(dest string);

'dest'

'string'


File: dejagnu.info,  Node: remote_raw_spawn procedure,  Next: remote_raw_transmit procedure,  Prev: remote_raw_send procedure,  Up: Procedures For Remote Communication

8.3.2.24 Remote_raw_spawn Procedure
...................................

     remote_raw_spawn(dest commandline);

'dest'

'commandline'


File: dejagnu.info,  Node: remote_raw_transmit procedure,  Next: remote_raw_wait procedure,  Prev: remote_raw_spawn procedure,  Up: Procedures For Remote Communication

8.3.2.25 Remote_raw_transmit Procedure
......................................

     remote_raw_transmit(dest file);

'dest'

'file'


File: dejagnu.info,  Node: remote_raw_wait procedure,  Next: remote_reboot procedure,  Prev: remote_raw_transmit procedure,  Up: Procedures For Remote Communication

8.3.2.26 Remote_raw_wait Procedure
..................................

     remote_raw_wait(dest timeout);

'dest'

'timeout'


File: dejagnu.info,  Node: remote_reboot procedure,  Next: remote_send procedure,  Prev: remote_raw_wait procedure,  Up: Procedures For Remote Communication

8.3.2.27 Remote_reboot Procedure
................................

Return value of this function depends on actual implementation of reboot
that will be used, in practice it is expected that 'remote_reboot'
returns _1_ on success and _0_ on failure.

     remote_reboot(host);

'host'


File: dejagnu.info,  Node: remote_send procedure,  Next: remote_spawn procedure,  Prev: remote_reboot procedure,  Up: Procedures For Remote Communication

8.3.2.28 Remote_send Procedure
..............................

     remote_send(dest string);

'dest'

'string'


File: dejagnu.info,  Node: remote_spawn procedure,  Next: remote_swap_conn procedure,  Prev: remote_send procedure,  Up: Procedures For Remote Communication

8.3.2.29 Remote_spawn Procedure
...............................

     remote_spawn(dest commandline args);

'dest'

'commandline'

'args'


File: dejagnu.info,  Node: remote_swap_conn procedure,  Next: remote_transmit procedure,  Prev: remote_spawn procedure,  Up: Procedures For Remote Communication

8.3.2.30 Remote_swap_conn Procedure
...................................

     remote_swap_conn(host);

''


File: dejagnu.info,  Node: remote_transmit procedure,  Next: remote_upload procedure,  Prev: remote_swap_conn procedure,  Up: Procedures For Remote Communication

8.3.2.31 Remote_transmit Procedure
..................................

     remote_transmit(dest file);

'dest'

'file'


File: dejagnu.info,  Node: remote_upload procedure,  Next: remote_wait procedure,  Prev: remote_transmit procedure,  Up: Procedures For Remote Communication

8.3.2.32 Remote_upload Procedure
................................

     remote_upload(dest srcfile arg);

'dest'

'srcfile'

'arg'


File: dejagnu.info,  Node: remote_wait procedure,  Next: standard_close procedure,  Prev: remote_upload procedure,  Up: Procedures For Remote Communication

8.3.2.33 Remote_wait Procedure
..............................

     remote_wait(dest timeout);

'dest'

'timeout'


File: dejagnu.info,  Node: standard_close procedure,  Next: standard_download procedure,  Prev: remote_wait procedure,  Up: Procedures For Remote Communication

8.3.2.34 Standard_close Procedure
.................................

     standard_close(host);

'host'


File: dejagnu.info,  Node: standard_download procedure,  Next: standard_exec procedure,  Prev: standard_close procedure,  Up: Procedures For Remote Communication

8.3.2.35 Standard_download Procedure
....................................

     standard_download(dest file destfile);

'dest'

'file'

'destfile'


File: dejagnu.info,  Node: standard_exec procedure,  Next: standard_file procedure,  Prev: standard_download procedure,  Up: Procedures For Remote Communication

8.3.2.36 Standard_exec Procedure
................................

     standard_exec(hostname args);

'hostname'

'args'


File: dejagnu.info,  Node: standard_file procedure,  Next: standard_load procedure,  Prev: standard_exec procedure,  Up: Procedures For Remote Communication

8.3.2.37 Standard_file Procedure
................................

     standard_file(dest op args);

''


File: dejagnu.info,  Node: standard_load procedure,  Next: standard_reboot procedure,  Prev: standard_file procedure,  Up: Procedures For Remote Communication

8.3.2.38 Standard_load Procedure
................................

     standard_load(dest prog args);

'dest'

'prog'

'args'


File: dejagnu.info,  Node: standard_reboot procedure,  Next: standard_send procedure,  Prev: standard_load procedure,  Up: Procedures For Remote Communication

8.3.2.39 Standard_reboot Procedure
..................................

It looks like that this procedure is never called, instead
'${board}_reboot' defined in 'base-config.exp' will be used because it
has higher priority and 'base-config.exp' is always imported by
'runtest'.

     standard_reboot(host);

'host'


File: dejagnu.info,  Node: standard_send procedure,  Next: standard_spawn procedure,  Prev: standard_reboot procedure,  Up: Procedures For Remote Communication

8.3.2.40 Standard_send Procedure
................................

     standard_send(dest string);

'dest'

'string'


File: dejagnu.info,  Node: standard_spawn procedure,  Next: standard_transmit procedure,  Prev: standard_send procedure,  Up: Procedures For Remote Communication

8.3.2.41 Standard_spawn Procedure
.................................

     standard_spawn(dest commandline);

'dest'

'commandline'


File: dejagnu.info,  Node: standard_transmit procedure,  Next: standard_upload procedure,  Prev: standard_spawn procedure,  Up: Procedures For Remote Communication

8.3.2.42 Standard_transmit Procedure
....................................

     standard_transmit(dest file);

'dest'

'file'


File: dejagnu.info,  Node: standard_upload procedure,  Next: standard_wait procedure,  Prev: standard_transmit procedure,  Up: Procedures For Remote Communication

8.3.2.43 Standard_upload Procedure
..................................

     standard_upload(dest srcfile destfile);

'dest'

'srcfile'

'destfile'


File: dejagnu.info,  Node: standard_wait procedure,  Next: unix_clean_filename procedure,  Prev: standard_upload procedure,  Up: Procedures For Remote Communication

8.3.2.44 Standard_wait Procedure
................................

     standard_wait(dest timeout);

'dest'

'timeout'


File: dejagnu.info,  Node: unix_clean_filename procedure,  Prev: standard_wait procedure,  Up: Procedures For Remote Communication

8.3.2.45 Unix_clean_filename Procedure
......................................

     unix_clean_filename(dest file);

'dest'

'file'


File: dejagnu.info,  Node: connprocs,  Next: Procedures For Target Boards,  Prev: Procedures For Remote Communication,  Up: Builtin Procedures

8.3.3 Procedures For Using Utilities to Connect
-----------------------------------------------

telnet, rsh, tip, kermit

* Menu:

* telnet Procedure: telnet procedure.
* rsh Procedure: rsh procedure.
* Tip Procedure: tip procedure.
* Kermit Procedure: kermit procedure.
* kermit_open Procedure: kermit_open procedure.
* Kermit_command Procedure: kermit_command procedure.
* Kermit_send Procedure: kermit_send procedure.
* Kermit_transmit Procedure: kermit_transmit procedure.
* Telnet_open Procedure: telnet_open procedure.
* Telnet_binary Procedure: telnet_binary procedure.
* Telnet_transmit Procedure: telnet_transmit procedure.
* Tip_open Procedure: tip_open procedure.
* Rlogin_open Procedure: rlogin_open procedure.
* Rlogin_spawn Procedure: rlogin_spawn procedure.
* Rsh_open Procedure: rsh_open procedure.
* Rsh_download Procedure: rsh_download procedure.
* Rsh_upload Procedure: rsh_upload procedure.
* Rsh_exec Procedure: rsh_exec procedure.
* Ftp_open Procedure: ftp_open procedure.
* Ftp_upload Procedure: ftp_upload procedure.
* Ftp_download Procedure: ftp_download procedure.
* Ftp_close Procedure: ftp_close procedure.
* Tip_download Procedure: tip_download procedure.


File: dejagnu.info,  Node: telnet procedure,  Next: rsh procedure,  Up: connprocs

8.3.3.1 telnet Procedure
........................

     telnet(hostname port);

     rlogin(hostname);


File: dejagnu.info,  Node: rsh procedure,  Next: tip procedure,  Prev: telnet procedure,  Up: connprocs

8.3.3.2 rsh Procedure
.....................

     rsh(hostname);

'hostname'
     This refers to the IP address or name (for example, an entry in
     '/etc/hosts') for this target.  The procedure names reflect the
     Unix utility used to establish a connection.  The optional 'port'
     is used to specify the IP port number.  The value of the 'netport'
     field in the 'target_info' array is used.  (was '$netport') This
     value has two parts, the hostname and the port number, separated by
     a _:_.  If host or target is used in the 'hostname' field, than the
     config array is used for all information.


File: dejagnu.info,  Node: tip procedure,  Next: kermit procedure,  Prev: rsh procedure,  Up: connprocs

8.3.3.3 Tip Procedure
.....................

     tip(port);

'port'
     Connect using the Unix utility 'tip'.  'Port'must be a name from
     the tip configuration file '/etc/remote'.  Often, this is called
     'hardwire', or something like 'ttya'.  This file holds all the
     configuration data for the serial port.  The value of the 'serial'
     field in the 'target_info' array is used.  (was '$serialport') If
     'host' or 'target' is used in the 'port' field, than the config
     array is used for all information.  the config array is used for
     all information.


File: dejagnu.info,  Node: kermit procedure,  Next: kermit_open procedure,  Prev: tip procedure,  Up: connprocs

8.3.3.4 Kermit Procedure
........................

     kermit(port bps);

'port'
     Connect using the program 'kermit'.  'Port' is the device name,
     e.g.  '/dev/ttyb'.

'bps'
     'bps' is the line speed to use (in its per second) for the
     connection.  The value of the 'serial' field in the 'target_info'
     array is used.  (was '$serialport') If 'host' or 'target' is used
     in the 'port' field, than the config array is used for all
     information.  the config array is used for all information.


File: dejagnu.info,  Node: kermit_open procedure,  Next: kermit_command procedure,  Prev: kermit procedure,  Up: connprocs

8.3.3.5 kermit_open Procedure
.............................

     kermit_open(dest args);

'dest'

'args'


File: dejagnu.info,  Node: kermit_command procedure,  Next: kermit_send procedure,  Prev: kermit_open procedure,  Up: connprocs

8.3.3.6 Kermit_command Procedure
................................

     kermit_command(dest args);

'dest'

'args'


File: dejagnu.info,  Node: kermit_send procedure,  Next: kermit_transmit procedure,  Prev: kermit_command procedure,  Up: connprocs

8.3.3.7 Kermit_send Procedure
.............................

     kermit_send(dest string args);

'dest'

'string'

'args'


File: dejagnu.info,  Node: kermit_transmit procedure,  Next: telnet_open procedure,  Prev: kermit_send procedure,  Up: connprocs

8.3.3.8 Kermit_transmit Procedure
.................................

     kermit_transmit(dest file args);

'dest'

'file'

'args'


File: dejagnu.info,  Node: telnet_open procedure,  Next: telnet_binary procedure,  Prev: kermit_transmit procedure,  Up: connprocs

8.3.3.9 Telnet_open Procedure
.............................

     telnet_open(hostname args);

'hostname'

'args'


File: dejagnu.info,  Node: telnet_binary procedure,  Next: telnet_transmit procedure,  Prev: telnet_open procedure,  Up: connprocs

8.3.3.10 Telnet_binary Procedure
................................

     telnet_binary(hostname);

'hostname'


File: dejagnu.info,  Node: telnet_transmit procedure,  Next: tip_open procedure,  Prev: telnet_binary procedure,  Up: connprocs

8.3.3.11 Telnet_transmit Procedure
..................................

     telnet_transmit(dest file args);

'dest'

'file'

'args'


File: dejagnu.info,  Node: tip_open procedure,  Next: rlogin_open procedure,  Prev: telnet_transmit procedure,  Up: connprocs

8.3.3.12 Tip_open Procedure
...........................

     tip_open(hostname);

'hostname'


File: dejagnu.info,  Node: rlogin_open procedure,  Next: rlogin_spawn procedure,  Prev: tip_open procedure,  Up: connprocs

8.3.3.13 Rlogin_open Procedure
..............................

     rlogin_open(arg);

'arg'


File: dejagnu.info,  Node: rlogin_spawn procedure,  Next: rsh_open procedure,  Prev: rlogin_open procedure,  Up: connprocs

8.3.3.14 Rlogin_spawn Procedure
...............................

     rlogin_spawn(dest cmdline);

'dest'

'cmdline'


File: dejagnu.info,  Node: rsh_open procedure,  Next: rsh_download procedure,  Prev: rlogin_spawn procedure,  Up: connprocs

8.3.3.15 Rsh_open Procedure
...........................

     rsh_open(hostname);

'hostname'


File: dejagnu.info,  Node: rsh_download procedure,  Next: rsh_upload procedure,  Prev: rsh_open procedure,  Up: connprocs

8.3.3.16 Rsh_download Procedure
...............................

     rsh_download(desthost srcfile destfile);

'desthost'

'srcfile'

'destfile'


File: dejagnu.info,  Node: rsh_upload procedure,  Next: rsh_exec procedure,  Prev: rsh_download procedure,  Up: connprocs

8.3.3.17 Rsh_upload Procedure
.............................

     rsh_upload(desthost srcfile destfile);

'desthost'

'srcfile'

'destfile'


File: dejagnu.info,  Node: rsh_exec procedure,  Next: ftp_open procedure,  Prev: rsh_upload procedure,  Up: connprocs

8.3.3.18 Rsh_exec Procedure
...........................

     rsh_exec(boardname cmd args);

'boardname'

'cmd'

'args'


File: dejagnu.info,  Node: ftp_open procedure,  Next: ftp_upload procedure,  Prev: rsh_exec procedure,  Up: connprocs

8.3.3.19 Ftp_open Procedure
...........................

     ftp_open(host);

'host'


File: dejagnu.info,  Node: ftp_upload procedure,  Next: ftp_download procedure,  Prev: ftp_open procedure,  Up: connprocs

8.3.3.20 Ftp_upload Procedure
.............................

     ftp_upload(host remotefile localfile);

'host'

'remotefile'

'localfile'


File: dejagnu.info,  Node: ftp_download procedure,  Next: ftp_close procedure,  Prev: ftp_upload procedure,  Up: connprocs

8.3.3.21 Ftp_download Procedure
...............................

     ftp_download(host localfile remotefile);

'host'

'localfile'

'remotefile'


File: dejagnu.info,  Node: ftp_close procedure,  Next: tip_download procedure,  Prev: ftp_download procedure,  Up: connprocs

8.3.3.22 Ftp_close Procedure
............................

     ftp_close(host);

'host'


File: dejagnu.info,  Node: tip_download procedure,  Prev: ftp_close procedure,  Up: connprocs

8.3.3.23 Tip_download Procedure
...............................

     tip_download(spawnid file);

'spawnid'
     Download 'file' to the process 'spawnid' (the value returned when
     the connection was established), using the '~put' command under
     tip.  Most often used for single board computers that require
     downloading programs in ASCII S-records.  Returns _1_ if an error
     occurs, _0_ otherwise.

'file'
     This is the filename to download.


File: dejagnu.info,  Node: Procedures For Target Boards,  Next: target database library file,  Prev: connprocs,  Up: Builtin Procedures

8.3.4 Procedures For Target Boards
----------------------------------

* Menu:

* Default_link Procedure: default_link procedure.
* Default_target_assemble Procedure: default_target_assemble procedure.
* default_target_compile Procedure: default_target_compile procedure.
* Pop_config Procedure: pop_config procedure.
* Prune_warnings Procedure: prune_warnings procedure.
* Push_build Procedure: push_build procedure.
* push_config Procedure: push_config procedure.
* Reboot_target Procedure: reboot_target procedure.
* Target_assemble Procedure: target_assemble procedure.
* Target_compile Procedure: target_compile procedure.


File: dejagnu.info,  Node: default_link procedure,  Next: default_target_assemble procedure,  Up: Procedures For Target Boards

8.3.4.1 Default_link Procedure
..............................

     default_link(board objects destfile flags);

'board'

'objects'

'destfile'

'flags'


File: dejagnu.info,  Node: default_target_assemble procedure,  Next: default_target_compile procedure,  Prev: default_link procedure,  Up: Procedures For Target Boards

8.3.4.2 Default_target_assemble Procedure
.........................................

     default_target_assemble(source destfile flags);

'source'

'destfile'

'flags'


File: dejagnu.info,  Node: default_target_compile procedure,  Next: pop_config procedure,  Prev: default_target_assemble procedure,  Up: Procedures For Target Boards

8.3.4.3 default_target_compile Procedure
........................................

     default_target_compile(source destfile type options);

'source'

'destfile'

'type'

'options'


File: dejagnu.info,  Node: pop_config procedure,  Next: prune_warnings procedure,  Prev: default_target_compile procedure,  Up: Procedures For Target Boards

8.3.4.4 Pop_config Procedure
............................

     pop_config(type);

'type'


File: dejagnu.info,  Node: prune_warnings procedure,  Next: push_build procedure,  Prev: pop_config procedure,  Up: Procedures For Target Boards

8.3.4.5 Prune_warnings Procedure
................................

     prune_warnings(text);

'text'


File: dejagnu.info,  Node: push_build procedure,  Next: push_config procedure,  Prev: prune_warnings procedure,  Up: Procedures For Target Boards

8.3.4.6 Push_build Procedure
............................

     push_build(name);

'name'


File: dejagnu.info,  Node: push_config procedure,  Next: reboot_target procedure,  Prev: push_build procedure,  Up: Procedures For Target Boards

8.3.4.7 push_config Procedure
.............................

     push_config(type name);

'type'

'name'


File: dejagnu.info,  Node: reboot_target procedure,  Next: target_assemble procedure,  Prev: push_config procedure,  Up: Procedures For Target Boards

8.3.4.8 Reboot_target Procedure
...............................

     reboot_target();


File: dejagnu.info,  Node: target_assemble procedure,  Next: target_compile procedure,  Prev: reboot_target procedure,  Up: Procedures For Target Boards

8.3.4.9 Target_assemble Procedure
.................................

     target_assemble(source destfile flags);

'source'

'destfile'

'flags'


File: dejagnu.info,  Node: target_compile procedure,  Prev: target_assemble procedure,  Up: Procedures For Target Boards

8.3.4.10 Target_compile Procedure
.................................

     target_compile(source destfile type options);

'source'

'destfile'

'type'

'options'


File: dejagnu.info,  Node: target database library file,  Next: platform dependent procedures,  Prev: Procedures For Target Boards,  Up: Builtin Procedures

8.3.5 Target Database Procedures
--------------------------------

* Menu:

* Board_info Procedure: board_info procedure.
* Host_info Procedure: host_info procedure.
* Set_board_info Procedure: set_board_info procedure.
* Add_board_info Procedure: add_board_info procedure.
* Set_currtarget_info Procedure: set_currtarget_info procedure.
* Target_info Procedure: target_info procedure.
* Unset_board_info Procedure: unset_board_info procedure.
* Unset_currtarget_info Procedure: unset_currtarget_info procedure.
* Push_target Procedure: push_target procedure.
* Pop_target Procedure: poptarget procedure.
* List_targets Procedure: list_targets procedure.
* Push_host Procedure: push_host procedure.
* Pop_host Procedure: pop_host procedure.
* Compile Procedure: compile procedure.
* Archive Procedure: archive procedure.
* Ranlib Procedure: ranlib procedure.
* Execute_anywhere Procedure: execute_anywhere procedure.


File: dejagnu.info,  Node: board_info procedure,  Next: host_info procedure,  Up: target database library file

8.3.5.1 Board_info Procedure
............................

     board_info(machine op args);

'machine'

'op'

'args'


File: dejagnu.info,  Node: host_info procedure,  Next: set_board_info procedure,  Prev: board_info procedure,  Up: target database library file

8.3.5.2 Host_info Procedure
...........................

     host_info(op args);

'op'

'args'


File: dejagnu.info,  Node: set_board_info procedure,  Next: add_board_info procedure,  Prev: host_info procedure,  Up: target database library file

8.3.5.3 Set_board_info Procedure
................................

This checks if 'board_info' array's field _entry_ has been set already
and if not, then sets it to _value_.

     set_board_info(entry value);

'entry'
     The name of a 'board_info' field to operate on.

'value'
     The value to set the field to.


File: dejagnu.info,  Node: add_board_info procedure,  Next: set_currtarget_info procedure,  Prev: set_board_info procedure,  Up: target database library file

8.3.5.4 Add_board_info Procedure
................................

This treats 'board_info' array's field _entry_ as a TCL list and adds
_value_ at the end.

     add_board_info(entry value);

'entry'
     The name of a 'board_info' field to operate on.

'value'
     The value to add to the field.


File: dejagnu.info,  Node: set_currtarget_info procedure,  Next: target_info procedure,  Prev: add_board_info procedure,  Up: target database library file

8.3.5.5 Set_currtarget_info Procedure
.....................................

     set_currtarget_info(entry value);

'entry'

'value'


File: dejagnu.info,  Node: target_info procedure,  Next: unset_board_info procedure,  Prev: set_currtarget_info procedure,  Up: target database library file

8.3.5.6 Target_info Procedure
.............................

     target_info(op args);

'op'

'args'


File: dejagnu.info,  Node: unset_board_info procedure,  Next: unset_currtarget_info procedure,  Prev: target_info procedure,  Up: target database library file

8.3.5.7 Unset_board_info Procedure
..................................

This checks if 'board_info' array's field _entry_ has been set and if
so, then removes it.

     unset_board_info(entry);

'entry'
     The name of a 'board_info' field to operate on.


File: dejagnu.info,  Node: unset_currtarget_info procedure,  Next: push_target procedure,  Prev: unset_board_info procedure,  Up: target database library file

8.3.5.8 Unset_currtarget_info Procedure
.......................................

     unset_currtarget_info(entry);

'entry'


File: dejagnu.info,  Node: push_target procedure,  Next: poptarget procedure,  Prev: unset_currtarget_info procedure,  Up: target database library file

8.3.5.9 Push_target Procedure
.............................

This makes the target named _name_ be the current target connection.
The value of _name_ is an index into the 'target_info' array and is set
in the global config file.

     push_target(name);

'name'
     The name of the target to make current connection.


File: dejagnu.info,  Node: poptarget procedure,  Next: list_targets procedure,  Prev: push_target procedure,  Up: target database library file

8.3.5.10 Pop_target Procedure
.............................

This unsets the current target connection.

     pop_target();


File: dejagnu.info,  Node: list_targets procedure,  Next: push_host procedure,  Prev: poptarget procedure,  Up: target database library file

8.3.5.11 List_targets Procedure
...............................

This lists all the supported targets for this architecture.

     list_targets();


File: dejagnu.info,  Node: push_host procedure,  Next: pop_host procedure,  Prev: list_targets procedure,  Up: target database library file

8.3.5.12 Push_host Procedure
............................

This makes the host named _name_ be the current remote host connection.
The value of _name_ is an index into the 'target_info' array and is set
in the global config file.

     push_host(name);

'name'


File: dejagnu.info,  Node: pop_host procedure,  Next: compile procedure,  Prev: push_host procedure,  Up: target database library file

8.3.5.13 Pop_host Procedure
...........................

This unsets the current host connection.

     pop_host();


File: dejagnu.info,  Node: compile procedure,  Next: archive procedure,  Prev: pop_host procedure,  Up: target database library file

8.3.5.14 Compile Procedure
..........................

This invokes the compiler as set by CC to compile the file 'file'.  The
default options for many cross compilation targets are _guessed_ by
DejaGnu, and these options can be added to by passing in more parameters
as arguments to 'compile'.  Optionally, this will also use the value of
the _cflags_ field in the target config array.  If the host is not the
same as the build machines, then then compiler is run on the remote host
using 'execute_anywhere'.

     compile(file);

'file'


File: dejagnu.info,  Node: archive procedure,  Next: ranlib procedure,  Prev: compile procedure,  Up: target database library file

8.3.5.15 Archive Procedure
..........................

This produces an archive file.  Any parameters passed to 'archive' are
used in addition to the default flags.  Optionally, this will also use
the value of the _arflags_ field in the target config array.  If the
host is not the same as the build machines, then then archiver is run on
the remote host using 'execute_anywhere'.

     archive(file);

'file'


File: dejagnu.info,  Node: ranlib procedure,  Next: execute_anywhere procedure,  Prev: archive procedure,  Up: target database library file

8.3.5.16 Ranlib Procedure
.........................

This generates an index for the archive file for systems that aren't
POSIX yet.  Any parameters passed to 'ranlib' are used in for the flags.

     ranlib(file);

'file'


File: dejagnu.info,  Node: execute_anywhere procedure,  Prev: ranlib procedure,  Up: target database library file

8.3.5.17 Execute_anywhere Procedure
...................................

This executes the _cmdline_ on the proper host.  This should be used as
a replacement for the Tcl command 'exec' as this version utilizes the
target config info to execute this command on the build machine or a
remote host.  All config information for the remote host must be setup
to have this command work.  If this is a Canadian cross (where we test a
cross compiler that runs on a different host then where DejaGnu is
running) then a connection is made to the remote host and the command is
executed there.  It returns either REMOTERROR (for an error) or the
output produced when the command was executed.  This is used for running
the tool to be tested, not a test case.

     execute_anywhere(cmdline);

'cmdline'


File: dejagnu.info,  Node: platform dependent procedures,  Next: Utility Procedures,  Prev: target database library file,  Up: Builtin Procedures

8.3.6 Platform Dependent Procedures
-----------------------------------

Each combination of target and tool requires some target-dependent
procedures.  The names of these procedures have a common form: the tool
name, followed by an underscore ___, and finally a suffix describing the
procedure's purpose.  For example, a procedure to extract the version
from GDB is called 'gdb_version'.

   'runtest' itself calls only two of these procedures, '${tool}_exit'
and '${tool}_version'; these procedures use no arguments.

   The other two procedures, '${tool}_start' and '${tool}_load', are
only called by the test suites themselves (or by testsuite-specific
initialization code); they may take arguments or not, depending on the
conventions used within each testsuite.

   The usual convention for return codes from any of these procedures
(although it is not required by 'runtest') is to return _0_ if the
procedure succeeded, _1_ if it failed, and _-1_ if there was a
communication error.

* Menu:

* ${tool}_start Procedure: ${tool}_start procedure.
* ${tool}_load Procedure: ${tool}_load procedure.
* ${tool}_exit Procedure: ${tool}_exit procedure.
* ${tool}_version Procedure: ${tool}_version procedure.


File: dejagnu.info,  Node: ${tool}_start procedure,  Next: ${tool}_load procedure,  Up: platform dependent procedures

8.3.6.1 ${tool}_start Procedure
...............................

Starts a particular tool.  For an interactive tool, '${tool}_start'
starts and initializes the tool, leaving the tool up and running for the
test cases; an example is 'gdb_start', the start function for GDB. For a
batch oriented tool, '${tool}_start' is optional; the recommended
convention is to let '${tool}_start' run the tool, leaving the output in
a variable called 'comp_output'.  Test scripts can then analyze
'$comp_output' to determine the test results.  An example of this second
kind of start function is 'gcc_start', the start function for GCC.

   DejaGnu itself does not call '${tool}_start'.  The initialization
module '${tool}_init.exp' must call '${tool}_start' for interactive
tools; for batch-oriented tools, each individual test script calls
'${tool}_start' (or makes other arrangements to run the tool).

     ${tool}_start();


File: dejagnu.info,  Node: ${tool}_load procedure,  Next: ${tool}_exit procedure,  Prev: ${tool}_start procedure,  Up: platform dependent procedures

8.3.6.2 ${tool}_load Procedure
..............................

Loads something into a tool.  For an interactive tool, this conditions
the tool for a particular test case; for example, 'gdb_load' loads a new
executable file into the debugger.  For batch oriented tools,
'${tool}_load' may do nothing--though, for example, the GCC support uses
'gcc_load' to load and run a binary on the target environment.
Conventionally, '${tool}_load' leaves the output of any program it runs
in a variable called '$exec_output'.  Writing '${tool}_load' can be the
most complex part of extending DejaGnu to a new tool or a new target, if
it requires much communication coding or file downloading.  Test scripts
call '${tool}_load'.

     ${tool}_load();


File: dejagnu.info,  Node: ${tool}_exit procedure,  Next: ${tool}_version procedure,  Prev: ${tool}_load procedure,  Up: platform dependent procedures

8.3.6.3 ${tool}_exit Procedure
..............................

Cleans up (if necessary) before DejaGnu exits.  For interactive tools,
this usually ends the interactive session.  You can also use
'${tool}_exit' to remove any temporary files left over from the tests.
'runtest' calls '${tool}_exit'.

     ${tool}_exit();


File: dejagnu.info,  Node: ${tool}_version procedure,  Prev: ${tool}_exit procedure,  Up: platform dependent procedures

8.3.6.4 ${tool}_version Procedure
.................................

Prints the version label and number for '${tool}'.  This is called by
the DejaGnu procedure that prints the final summary report.  The output
should consist of the full path name used for the tested tool, and its
version number.

     ${tool}_version();


File: dejagnu.info,  Node: Utility Procedures,  Next: Libgloss,  Prev: platform dependent procedures,  Up: Builtin Procedures

8.3.7 Utility Procedures
------------------------

* Menu:

* Getdirs Procedure: getdirs procedure.
* Find Procedure: find procedure.
* Which Procedure: which procedure.
* Grep Procedure: grep procedure.
* Prune Procedure: prune procedure.
* Slay Procedure: slay procedure.
* Absolute Procedure: absolute procedure.
* Psource Procedure: psource procedure.
* Runtest_file_p Procedure: runtest_file_p procedure.
* Diff Procedure: diff procedure.
* Setenv Procedure: setenv procedure.
* unsetenv Procedure: unsetenv procedure.
* Getenv Procedure: getenv procedure.
* Prune_system_crud Procedure: prune_system_crud procedure.


File: dejagnu.info,  Node: getdirs procedure,  Next: find procedure,  Up: Utility Procedures

8.3.7.1 Getdirs Procedure
.........................

Returns a list of all the directories in the single directory a single
directory that match an optional pattern.

     getdirs(rootdir pattern);

'args'

'pattern'
     If you do not specify 'pattern', 'Getdirs' assumes a default
     pattern of _*_.  You may use the common shell wildcard characters
     in the pattern.  If no directories match the pattern, then a NULL
     string is returned.


File: dejagnu.info,  Node: find procedure,  Next: which procedure,  Prev: getdirs procedure,  Up: Utility Procedures

8.3.7.2 Find Procedure
......................

Search for files whose names match _pattern_ (using shell wildcard
characters for filename expansion).  Search subdirectories recursively,
starting at _rootdir_.  The result is the list of files whose names
match; if no files match, the result is empty.  Filenames in the result
include all intervening subdirectory names.  If no files match the
pattern, then a NULL string is returned.

     find(rootdir pattern);

'rootdir'
     The top level directory to search the search from.

'pattern'
     A csh "glob" style regular expression representing the files to
     find.


File: dejagnu.info,  Node: which procedure,  Next: grep procedure,  Prev: find procedure,  Up: Utility Procedures

8.3.7.3 Which Procedure
.......................

Searches the execution path for an executable file _binary_, like the
BSD 'which' utility.  This procedure uses the shell environment variable
_PATH_. It returns _0_ if the binary is not in the path, or if there is
no _PATH_ environment variable.  If 'binary' is in the path, it returns
the full path to 'binary'.

     which(file);

'binary'
     The executable program or shell script to look for.


File: dejagnu.info,  Node: grep procedure,  Next: prune procedure,  Prev: which procedure,  Up: Utility Procedures

8.3.7.4 Grep Procedure
......................

Search the file called 'filename' (a fully specified path) for lines
that contain a match for regular expression _regexp_.  The result is a
list of all the lines that match.  If no lines match, the result is an
empty string.  Specify _regexp_ using the standard regular expression
style used by the Unix utility program grep.

   Use the optional third argument _line_ to start lines in the result
with the line number in 'filename'.  (This argument is simply an option
flag; type it just as shown '--line'.)

     grep(filename regexp -line);

'filename'
     The file to search.

'regexp'
     The Unix style regular expression (as used by the 'grep' Unix
     utility) to search for.

'--line'
     Prefix the line number to each line where the regexp matches.


File: dejagnu.info,  Node: prune procedure,  Next: slay procedure,  Prev: grep procedure,  Up: Utility Procedures

8.3.7.5 Prune Procedure
.......................

This procedure is deprecated and will be removed in the next release of
DejaGnu.  If a testsuite uses this procedure, a copy of the procedure
should be made and placed in the lib directory of the testsuite.


File: dejagnu.info,  Node: slay procedure,  Next: absolute procedure,  Prev: prune procedure,  Up: Utility Procedures

8.3.7.6 Slay Procedure
......................

This procedure is deprecated and will be removed in the next release of
DejaGnu.  If a testsuite uses this procedure, a copy of the procedure
should be made and placed in the lib directory of the testsuite.


File: dejagnu.info,  Node: absolute procedure,  Next: psource procedure,  Prev: slay procedure,  Up: Utility Procedures

8.3.7.7 Absolute Procedure
..........................

This procedure is deprecated and will be removed in the next release of
DejaGnu.  If a testsuite uses this procedure, a copy of the procedure
should be made and placed in the lib directory of the testsuite.


File: dejagnu.info,  Node: psource procedure,  Next: runtest_file_p procedure,  Prev: absolute procedure,  Up: Utility Procedures

8.3.7.8 Psource Procedure
.........................

This procedure is deprecated and will be removed in the next release of
DejaGnu.  If a testsuite uses this procedure, a copy of the procedure
should be made and placed in the lib directory of the testsuite.


File: dejagnu.info,  Node: runtest_file_p procedure,  Next: diff procedure,  Prev: psource procedure,  Up: Utility Procedures

8.3.7.9 Runtest_file_p Procedure
................................

Search _runtest_s for _testcase_ and return _1_ if found, _0_ if not.
_runtests_ is a list of two elements.  The first is a copy of what was
on the right side of the _=_ if

     foo.exp="..."

   was specified, or an empty string if no such argument is present.
The second is the pathname of the current testcase under consideration.
This is used by tools like compilers where each testcase is a file.

     runtest_file_p(runtests testcase);

'runtests'
     The list of patterns to compare against.

'testcase'
     The test case filename.


File: dejagnu.info,  Node: diff procedure,  Next: setenv procedure,  Prev: runtest_file_p procedure,  Up: Utility Procedures

8.3.7.10 Diff Procedure
.......................

Compares the two files and returns a _1_ if they match, or a _0_ if they
don't.  If 'verbose' is set, then it'll print the differences to the
screen.

     diff(file_1 file_2);

'file_1'
     The first file to compare.

'file_2'
     The second file to compare.


File: dejagnu.info,  Node: setenv procedure,  Next: unsetenv procedure,  Prev: diff procedure,  Up: Utility Procedures

8.3.7.11 Setenv Procedure
.........................

Sets the environment variable _var_ to the value _val_.

     setenv(var val);

'var'
     The environment variable to set.

'val'
     The value to set the variable to.


File: dejagnu.info,  Node: unsetenv procedure,  Next: getenv procedure,  Prev: setenv procedure,  Up: Utility Procedures

8.3.7.12 unsetenv Procedure
...........................

Unsets the environment variable _var_.

     unsetenv(var);

'var'
     The environment variable to unset.


File: dejagnu.info,  Node: getenv procedure,  Next: prune_system_crud procedure,  Prev: unsetenv procedure,  Up: Utility Procedures

8.3.7.13 Getenv Procedure
.........................

Returns the value of _var_ in the environment if it exists, otherwise it
returns NULL.

     getenv(var);

'var'
     The environment variable to get the value of.


File: dejagnu.info,  Node: prune_system_crud procedure,  Prev: getenv procedure,  Up: Utility Procedures

8.3.7.14 Prune_system_crud Procedure
....................................

For system _system_, delete text the host or target operating system
might issue that will interfere with pattern matching of program output
in _text_.  An example is the message that is printed if a shared
library is out of date.

     prune_system_crud(system test);

'system'
     The system error messages to look for to screen out .

'text'
     The Tcl variable containing the text.


File: dejagnu.info,  Node: Libgloss,  Next: Debugging Procedures,  Prev: Utility Procedures,  Up: Builtin Procedures

8.3.8 Libgloss, A Free BSP
--------------------------

Libgloss is a free "BSP" (Board Support Package) commonly used with GCC
and G++ to produce a fully linked executable image for an embedded
systems.

* Menu:

* Libgloss_link_flags Procedure: libgloss_link_flags procedure.
* Libgloss_include_flags Procedure: libgloss_include_flags procedure.
* Newlib_link_flags Procedure: newlib_link_flags procedure.
* Newlib_include_flags Procedure: newlib_include_flags procedure.
* Libio_include_flags Procedure: libio_include_flags procedure.
* Libio_link_flags Procedure: libio_link_flags procedure.
* G++_include_flags Procedure: g++_include_flags procedure.
* G++_link_flags Procedure: g++_link_flags procedure.
* Libstdc++_include_flags Procedure: libstdc++_include_flags procedure.
* Libstdc++_link_flags Procedure: libstdc++_link_flags procedure.
* Get_multilibs Procedure: get_multilibs procedure.
* Find_binutils_prog Procedure: find_binutils_prog procedure.
* Find_gcc Procedure: find_gcc procedure.
* Find_gcj Procedure: find_gcj procedure.
* Find_g++ Procedure: find_g++ procedure.
* Find_g77 Procedure: find_g77 procedure.
* Find_gfortran Procedure: find_gfortran procedure.
* Process_multilib_options Procedure: process_multilib_options procedure.
* Add_multilib_option Procedure: add_multilib_option procedure.
* Find_gas Procedure: find_gas procedure.
* Find_ld Procedure: find_ld procedure.
* Build_wrapper Procedure: build_wrapper procedure.
* Winsup_include_flags Procedure: winsup_include_flags procedure.
* Winsup_link_flags Procedure: winsup_link_flags procedure.


File: dejagnu.info,  Node: libgloss_link_flags procedure,  Next: libgloss_include_flags procedure,  Up: Libgloss

8.3.8.1 Libgloss_link_flags Procedure
.....................................

     libgloss_link_flags(args);

'args'


File: dejagnu.info,  Node: libgloss_include_flags procedure,  Next: newlib_link_flags procedure,  Prev: libgloss_link_flags procedure,  Up: Libgloss

8.3.8.2 Libgloss_include_flags Procedure
........................................

     libgloss_include_flags(args);

'args'


File: dejagnu.info,  Node: newlib_link_flags procedure,  Next: newlib_include_flags procedure,  Prev: libgloss_include_flags procedure,  Up: Libgloss

8.3.8.3 Newlib_link_flags Procedure
...................................

     newlib_link_flags(args);

'args'


File: dejagnu.info,  Node: newlib_include_flags procedure,  Next: libio_include_flags procedure,  Prev: newlib_link_flags procedure,  Up: Libgloss

8.3.8.4 Newlib_include_flags Procedure
......................................

     newlib_include_flags(args);

'args'


File: dejagnu.info,  Node: libio_include_flags procedure,  Next: libio_link_flags procedure,  Prev: newlib_include_flags procedure,  Up: Libgloss

8.3.8.5 Libio_include_flags Procedure
.....................................

     libio_include_flags(args);

'args'


File: dejagnu.info,  Node: libio_link_flags procedure,  Next: g++_include_flags procedure,  Prev: libio_include_flags procedure,  Up: Libgloss

8.3.8.6 Libio_link_flags Procedure
..................................

     libio_link_flags(args);

'args'


File: dejagnu.info,  Node: g++_include_flags procedure,  Next: g++_link_flags procedure,  Prev: libio_link_flags procedure,  Up: Libgloss

8.3.8.7 G++_include_flags Procedure
...................................

     g++_include_flags(args);

'args'


File: dejagnu.info,  Node: g++_link_flags procedure,  Next: libstdc++_include_flags procedure,  Prev: g++_include_flags procedure,  Up: Libgloss

8.3.8.8 G++_link_flags Procedure
................................

     g++_link_flags(args);

'args'


File: dejagnu.info,  Node: libstdc++_include_flags procedure,  Next: libstdc++_link_flags procedure,  Prev: g++_link_flags procedure,  Up: Libgloss

8.3.8.9 Libstdc++_include_flags Procedure
.........................................

     libstdc++_include_flags(args);

'args'


File: dejagnu.info,  Node: libstdc++_link_flags procedure,  Next: get_multilibs procedure,  Prev: libstdc++_include_flags procedure,  Up: Libgloss

8.3.8.10 Libstdc++_link_flags Procedure
.......................................

     libstdc++_link_flags(args);

'args'


File: dejagnu.info,  Node: get_multilibs procedure,  Next: find_binutils_prog procedure,  Prev: libstdc++_link_flags procedure,  Up: Libgloss

8.3.8.11 Get_multilibs Procedure
................................

     get_multilibs(args);

'args'


File: dejagnu.info,  Node: find_binutils_prog procedure,  Next: find_gcc procedure,  Prev: get_multilibs procedure,  Up: Libgloss

8.3.8.12 Find_binutils_prog Procedure
.....................................

     find_binutils_prog(name);

'name'


File: dejagnu.info,  Node: find_gcc procedure,  Next: find_gcj procedure,  Prev: find_binutils_prog procedure,  Up: Libgloss

8.3.8.13 Find_gcc Procedure
...........................

     find_gcc();


File: dejagnu.info,  Node: find_gcj procedure,  Next: find_g++ procedure,  Prev: find_gcc procedure,  Up: Libgloss

8.3.8.14 Find_gcj Procedure
...........................

     find_gcj();


File: dejagnu.info,  Node: find_g++ procedure,  Next: find_g77 procedure,  Prev: find_gcj procedure,  Up: Libgloss

8.3.8.15 Find_g++ Procedure
...........................

     find_g++();


File: dejagnu.info,  Node: find_g77 procedure,  Next: find_gfortran procedure,  Prev: find_g++ procedure,  Up: Libgloss

8.3.8.16 Find_g77 Procedure
...........................

     find_g77();


File: dejagnu.info,  Node: find_gfortran procedure,  Next: process_multilib_options procedure,  Prev: find_g77 procedure,  Up: Libgloss

8.3.8.17 Find_gfortran Procedure
................................

     find_gfortran();


File: dejagnu.info,  Node: process_multilib_options procedure,  Next: add_multilib_option procedure,  Prev: find_gfortran procedure,  Up: Libgloss

8.3.8.18 Process_multilib_options Procedure
...........................................

     process_multilib_options(args);

'args'


File: dejagnu.info,  Node: add_multilib_option procedure,  Next: find_gas procedure,  Prev: process_multilib_options procedure,  Up: Libgloss

8.3.8.19 Add_multilib_option Procedure
......................................

     add_multilib_option(args);

'args'


File: dejagnu.info,  Node: find_gas procedure,  Next: find_ld procedure,  Prev: add_multilib_option procedure,  Up: Libgloss

8.3.8.20 Find_gas Procedure
...........................

     find_gas();


File: dejagnu.info,  Node: find_ld procedure,  Next: build_wrapper procedure,  Prev: find_gas procedure,  Up: Libgloss

8.3.8.21 Find_ld Procedure
..........................

     find_ld();


File: dejagnu.info,  Node: build_wrapper procedure,  Next: winsup_include_flags procedure,  Prev: find_ld procedure,  Up: Libgloss

8.3.8.22 Build_wrapper Procedure
................................

     build_wrapper(gluefile);

'gluefile'


File: dejagnu.info,  Node: winsup_include_flags procedure,  Next: winsup_link_flags procedure,  Prev: build_wrapper procedure,  Up: Libgloss

8.3.8.23 Winsup_include_flags Procedure
.......................................

     winsup_include_flags(args);

'args'


File: dejagnu.info,  Node: winsup_link_flags procedure,  Prev: winsup_include_flags procedure,  Up: Libgloss

8.3.8.24 Winsup_link_flags Procedure
....................................

     winsup_link_flags(args);

'args'


File: dejagnu.info,  Node: Debugging Procedures,  Prev: Libgloss,  Up: Builtin Procedures

8.3.9 Procedures for debugging your Tcl code.
---------------------------------------------

'lib/debugger.exp'defines these utility procedures:

* Menu:

* Dumpvars Procedure: dumpvars procedure.
* Dumplocals Procedure: dumplocals procedure.
* Dumprocs Procedure: dumprocs procedure.
* Dumpwatch Procedure: dumpwatch procedure.
* Watcharray Procedure: watcharray procedure.
* Watchvar Procedure: watchvar procedure.
* Watchunset Procedure: watchunset procedure.
* Watchwrite Procedure: watchwrite procedure.
* Watchread Procedure: watchread procedure.
* Watchdel Procedure: watchdel procedure.
* Print Procedure: print procedure.
* Quit Procedure: quit procedure.


File: dejagnu.info,  Node: dumpvars procedure,  Next: dumplocals procedure,  Up: Debugging Procedures

8.3.9.1 Dumpvars Procedure
..........................

This takes a csh style regular expression (glob rules) and prints the
values of the global variable names that match.  It is abbreviated as
_dv_.

     dumpvars(vars);

'vars'
     The variables to dump.


File: dejagnu.info,  Node: dumplocals procedure,  Next: dumprocs procedure,  Prev: dumpvars procedure,  Up: Debugging Procedures

8.3.9.2 Dumplocals Procedure
............................

This takes a csh style regular expression (glob rules) and prints the
values of the local variable names that match.  It is abbreviated as
_dl_.

     dumplocals(args);

'args'


File: dejagnu.info,  Node: dumprocs procedure,  Next: dumpwatch procedure,  Prev: dumplocals procedure,  Up: Debugging Procedures

8.3.9.3 Dumprocs Procedure
..........................

This takes a csh style regular expression (glob rules) and prints the
body of all procs that match.  It is abbreviated as _dp_.

     dumprocs(pattern);

'pattern'
     The csh "glob" style pattern to look for.


File: dejagnu.info,  Node: dumpwatch procedure,  Next: watcharray procedure,  Prev: dumprocs procedure,  Up: Debugging Procedures

8.3.9.4 Dumpwatch Procedure
...........................

This takes a csh style regular expression (glob rules) and prints all
the watchpoints.  It is abbreviated as _dw_.

     dumpwatch(pattern);

'pattern'
     The csh "glob" style pattern to look for.


File: dejagnu.info,  Node: watcharray procedure,  Next: watchvar procedure,  Prev: dumpwatch procedure,  Up: Debugging Procedures

8.3.9.5 Watcharray Procedure
............................

     watcharray(element type);

'type'
     The csh "glob" style pattern to look for.


File: dejagnu.info,  Node: watchvar procedure,  Next: watchunset procedure,  Prev: watcharray procedure,  Up: Debugging Procedures

8.3.9.6 Watchvar Procedure
..........................

     watchvar(var type);

''


File: dejagnu.info,  Node: watchunset procedure,  Next: watchwrite procedure,  Prev: watchvar procedure,  Up: Debugging Procedures

8.3.9.7 Watchunset Procedure
............................

This breaks program execution when the variable 'var' is unset.  It is
abbreviated as _wu_.

     watchunset(arg);

'args'


File: dejagnu.info,  Node: watchwrite procedure,  Next: watchread procedure,  Prev: watchunset procedure,  Up: Debugging Procedures

8.3.9.8 Watchwrite Procedure
............................

This breaks program execution when the variable 'var' is written.  It is
abbreviated as _ww_.

     watchwrite(var);

'var'
     The variable to watch.


File: dejagnu.info,  Node: watchread procedure,  Next: watchdel procedure,  Prev: watchwrite procedure,  Up: Debugging Procedures

8.3.9.9 Watchread Procedure
...........................

This breaks program execution when the variable 'var' is read.  It is
abbreviated as _wr_.

     watchread(var);

'var'
     The variable to watch.


File: dejagnu.info,  Node: watchdel procedure,  Next: print procedure,  Prev: watchread procedure,  Up: Debugging Procedures

8.3.9.10 Watchdel Procedure
...........................

This deletes a watchpoint from the watch list.  It is abbreviated as
_wd_.

     watchdel(args);

'args'


File: dejagnu.info,  Node: print procedure,  Next: quit procedure,  Prev: watchdel procedure,  Up: Debugging Procedures

8.3.9.11 Print Procedure
........................

This prints the value of the variable 'var'.  It is abbreviated as _p_.

     print(var);

'var'


File: dejagnu.info,  Node: quit procedure,  Prev: print procedure,  Up: Debugging Procedures

8.3.9.12 Quit Procedure
.......................

This makes runtest exit.  It is abbreviated as _q_.

     quit();

''


File: dejagnu.info,  Node: File Map,  Prev: Builtin Procedures,  Up: Reference

8.4 File Map
============

This is a map of the files in DejaGnu.

   * runtest

   * runtest.exp

   * stub-loader.c

   * testglue.c

   * config

   * baseboards

   * lib/debugger.exp

   * lib/dg.exp

   * lib/framework.exp

   * lib/ftp.exp

   * lib/kermit.exp

   * lib/libgloss.exp

   * lib/mondfe.exp

   * lib/remote.exp

   * lib/rlogin.exp

   * lib/rsh.exp

   * lib/standard.exp

   * lib/target.exp

   * lib/targetdb.exp

   * lib/telnet.exp

   * lib/tip.exp

   * lib/util-defs.exp

   * lib/utils.exp

   * lib/xsh.exp

   * lib/dejagnu.exp


File: dejagnu.info,  Node: Unit Testing API,  Prev: Reference,  Up: Top

9 Unit Testing API
******************

* Menu:

* C Unit Testing API::
* C++ Unit Testing API::


File: dejagnu.info,  Node: C Unit Testing API,  Next: C++ Unit Testing API,  Up: Unit Testing API

9.1 C Unit Testing API
======================

All of the functions that take a 'msg' parameter use a C char * that is
the message to be displayed.  There currently is no support for variable
length arguments.

* Menu:

* Pass Function: pass function.
* Fail Function: fail function.
* Untested Function: untested function.
* Unresolved Function: unresolved function.
* Totals Function: totals function.


File: dejagnu.info,  Node: pass function,  Next: fail function,  Up: C Unit Testing API

9.1.1 Pass Function
-------------------

This prints a message for a successful test completion.

     pass(msg);


File: dejagnu.info,  Node: fail function,  Next: untested function,  Prev: pass function,  Up: C Unit Testing API

9.1.2 Fail Function
-------------------

This prints a message for an unsuccessful test completion.

     fail(msg);


File: dejagnu.info,  Node: untested function,  Next: unresolved function,  Prev: fail function,  Up: C Unit Testing API

9.1.3 Untested Function
-----------------------

This prints a message for an test case that isn't run for some technical
reason.

     untested(msg);


File: dejagnu.info,  Node: unresolved function,  Next: totals function,  Prev: untested function,  Up: C Unit Testing API

9.1.4 Unresolved Function
-------------------------

This prints a message for an test case that is run, but there is no
clear result.  These output states require a human to look over the
results to determine what happened.

     unresolved(msg);


File: dejagnu.info,  Node: totals function,  Prev: unresolved function,  Up: C Unit Testing API

9.1.5 Totals Function
---------------------

This prints out the total numbers of all the test state outputs.

     totals();


File: dejagnu.info,  Node: C++ Unit Testing API,  Prev: C Unit Testing API,  Up: Unit Testing API

9.2 C++ Unit Testing API
========================

All of the methods that take a 'msg' parameter use a C char * or STL
string, that is the message to be displayed.  There currently is no
support for variable length arguments.

* Menu:

* Pass Method: pass method.
* Fail Method: fail method.
* Untested Method: untested method.
* Unresolved Method: unresolved method.
* Totals Method: totals method.


File: dejagnu.info,  Node: pass method,  Next: fail method,  Up: C++ Unit Testing API

9.2.1 Pass Method
-----------------

This prints a message for a successful test completion.

     TestState::pass(msg);


File: dejagnu.info,  Node: fail method,  Next: untested method,  Prev: pass method,  Up: C++ Unit Testing API

9.2.2 Fail Method
-----------------

This prints a message for an unsuccessful test completion.

     TestState::fail(msg);


File: dejagnu.info,  Node: untested method,  Next: unresolved method,  Prev: fail method,  Up: C++ Unit Testing API

9.2.3 Untested Method
---------------------

This prints a message for an test case that isn't run for some technical
reason.

     TestState::untested(msg);


File: dejagnu.info,  Node: unresolved method,  Next: totals method,  Prev: untested method,  Up: C++ Unit Testing API

9.2.4 Unresolved Method
-----------------------

This prints a message for an test case that is run, but there is no
clear result.  These output states require a human to look over the
results to determine what happened.

     TestState::unresolved(msg);


File: dejagnu.info,  Node: totals method,  Prev: unresolved method,  Up: C++ Unit Testing API

9.2.5 Totals Method
-------------------

This prints out the total numbers of all the test state outputs.

     TestState::totals();



Tag Table:
Node: Top204
Node: Abstract1746
Node: Overview2509
Node: What is DejaGnu ?2796
Node: Release Notes5339
Node: Windows Support6615
Node: Design Goals7342
Node: A POSIX Conforming Test Framework8993
Node: Getting DejaGnu up and running14353
Node: Test your installation15501
Node: Windows16970
Node: Getting the source code for the calc example17597
Node: Create a minimal project; e_g_ calc18083
Node: A simple project without the GNU autotools18558
Node: Using autoconf/autoheader/automake19205
Node: Our first automated tests24528
Node: Running the test for the calc example24919
Node: The various config files or how to avoid warnings27191
Node: When trouble strikes29599
Node: Testing "Hello world" locally30437
Node: A first remote test31094
Node: Setup telnet to your own host31792
Node: A test case for login via telnet33195
Node: Remote testing "Hello world"35191
Node: Transferring files from/to the target37061
Node: Preparing for cross-compilation38291
Node: Remote testing of calc40464
Node: Using Windows as host and vxWorks as target40815
Node: Running Tests41808
Node: Make Check42426
Node: Runtest43523
Node: Output States44125
Node: Invoking Runtest46616
Ref: --tool[name[s]]52555
Node: Common Operations55746
Node: Output Files57407
Node: Summary File57909
Node: Log File59678
Node: Debug Log File61537
Node: Customizing DejaGnu65483
Node: Local Config File67817
Node: Global Config File71722
Node: Board Config File74753
Node: Remote Host Testing77983
Node: Config File Values82326
Node: Option Variables82839
Node: Personal Config File86505
Node: Extending DejaGnu87438
Node: Adding a new Testsuite87980
Node: Adding A New Tool88486
Node: Adding A New Target96781
Node: Adding A New Board98775
Node: Board File Values101832
Node: Writing A Test Case108262
Node: Debugging A Test Case110698
Node: Adding A Test Case To A Testsuite113018
Node: Hints On Writing A Test Case115047
Node: Test Case Variables117721
Node: Unit Testing119170
Node: What Is Unit Testing ?119391
Node: The dejagnu_h Header File120235
Node: Reference120932
Node: Obtaining DejaGnu121138
Node: Installation121453
Node: Configuring DejaGnu121853
Node: Installing DejaGnu123548
Node: Builtin Procedures124512
Node: Core Internal Procedures125116
Node: mail_file procedure126933
Node: open_logs procedure127137
Node: close_logs procedure127351
Node: isbuild procedure127566
Node: is_remote procedure128260
Node: is3way procedure128477
Node: ishost procedure128858
Node: istarget procedure129435
Node: isnative procedure130121
Node: unknown procedure130495
Node: clone_output procedure130716
Node: reset_vars procedure130960
Node: log_and_exit procedure131185
Node: log_summary procedure131415
Node: cleanup procedure131651
Node: setup_xfail procedure131862
Node: record_test procedure133393
Node: pass procedure133657
Node: fail procedure134080
Node: xpass procedure134497
Node: xfail procedure134971
Node: set_warning_threshold procedure135421
Node: get_warning_threshold procedure135910
Node: warning procedure136355
Node: perror procedure137723
Node: note procedure138761
Node: untested procedure139333
Node: unresolved procedure139864
Node: unsupported procedure140468
Node: init_testcounts procedure140969
Node: incr_count procedure141211
Node: transform procedure141461
Node: check_conditional_xfail procedure142126
Node: clear_xfail procedure144789
Node: verbose procedure145389
Node: load_lib procedure146281
Node: Procedures For Remote Communication147430
Node: call_remote procedure150879
Node: check_for_board_status procedure151139
Node: file_on_build procedure151441
Node: file_on_host procedure151731
Node: local_exec procedure152006
Node: remote_binary procedure152295
Node: remote_close procedure152551
Node: remote_download procedure153056
Node: remote_exec procedure153347
Node: remote_expect procedure153641
Node: remote_file procedure153933
Node: remote_ld procedure154196
Node: remote_load procedure154451
Node: remote_open procedure154725
Node: remote_pop_conn procedure155519
Node: remote_push_conn procedure155790
Node: remote_raw_binary procedure156070
Node: remote_raw_close procedure156354
Node: remote_raw_file procedure156634
Node: remote_raw_ld procedure156920
Node: remote_raw_load procedure157199
Node: remote_raw_open procedure157497
Node: remote_raw_send procedure157771
Node: remote_raw_spawn procedure158063
Node: remote_raw_transmit procedure158372
Node: remote_raw_wait procedure158676
Node: remote_reboot procedure158971
Node: remote_send procedure159417
Node: remote_spawn procedure159687
Node: remote_swap_conn procedure159986
Node: remote_transmit procedure160257
Node: remote_upload procedure160543
Node: remote_wait procedure160835
Node: standard_close procedure161109
Node: standard_download procedure161377
Node: standard_exec procedure161690
Node: standard_file procedure161977
Node: standard_load procedure162243
Node: standard_reboot procedure162533
Node: standard_send procedure163009
Node: standard_spawn procedure163291
Node: standard_transmit procedure163588
Node: standard_upload procedure163882
Node: standard_wait procedure164196
Node: unix_clean_filename procedure164485
Node: connprocs164752
Node: telnet procedure166085
Node: rsh procedure166274
Node: tip procedure167003
Node: kermit procedure167692
Node: kermit_open procedure168325
Node: kermit_command procedure168558
Node: kermit_send procedure168805
Node: kermit_transmit procedure169064
Node: telnet_open procedure169328
Node: telnet_binary procedure169577
Node: telnet_transmit procedure169821
Node: tip_open procedure170086
Node: rlogin_open procedure170310
Node: rlogin_spawn procedure170530
Node: rsh_open procedure170774
Node: rsh_download procedure170996
Node: rsh_upload procedure171268
Node: rsh_exec procedure171534
Node: ftp_open procedure171776
Node: ftp_upload procedure171984
Node: ftp_download procedure172250
Node: ftp_close procedure172523
Node: tip_download procedure172741
Node: Procedures For Target Boards173301
Node: default_link procedure174069
Node: default_target_assemble procedure174353
Node: default_target_compile procedure174694
Node: pop_config procedure175047
Node: prune_warnings procedure175298
Node: push_build procedure175549
Node: push_config procedure175789
Node: reboot_target procedure176044
Node: target_assemble procedure176285
Node: target_compile procedure176587
Node: target database library file176873
Node: board_info procedure177950
Node: host_info procedure178183
Node: set_board_info procedure178427
Node: add_board_info procedure178896
Node: set_currtarget_info procedure179357
Node: target_info procedure179650
Node: unset_board_info procedure179913
Node: unset_currtarget_info procedure180331
Node: push_target procedure180619
Node: poptarget procedure181093
Node: list_targets procedure181364
Node: push_host procedure181656
Node: pop_host procedure182061
Node: compile procedure182316
Node: archive procedure182992
Node: ranlib procedure183537
Node: execute_anywhere procedure183904
Node: platform dependent procedures184815
Node: ${tool}_start procedure186173
Node: ${tool}_load procedure187208
Node: ${tool}_exit procedure188099
Node: ${tool}_version procedure188574
Node: Utility Procedures189021
Node: getdirs procedure189773
Node: find procedure190320
Node: which procedure191062
Node: grep procedure191629
Node: prune procedure192559
Node: slay procedure192933
Node: absolute procedure193309
Node: psource procedure193695
Node: runtest_file_p procedure194089
Node: diff procedure194829
Node: setenv procedure195269
Node: unsetenv procedure195615
Node: getenv procedure195904
Node: prune_system_crud procedure196257
Node: Libgloss196830
Node: libgloss_link_flags procedure198530
Node: libgloss_include_flags procedure198764
Node: newlib_link_flags procedure199043
Node: newlib_include_flags procedure199308
Node: libio_include_flags procedure199579
Node: libio_link_flags procedure199846
Node: g++_include_flags procedure200101
Node: g++_link_flags procedure200354
Node: libstdc++_include_flags procedure200605
Node: libstdc++_link_flags procedure200886
Node: get_multilibs procedure201159
Node: find_binutils_prog procedure201406
Node: find_gcc procedure201656
Node: find_gcj procedure201859
Node: find_g++ procedure202052
Node: find_g77 procedure202245
Node: find_gfortran procedure202443
Node: process_multilib_options procedure202672
Node: add_multilib_option procedure202957
Node: find_gas procedure203222
Node: find_ld procedure203425
Node: build_wrapper procedure203619
Node: winsup_include_flags procedure203863
Node: winsup_link_flags procedure204130
Node: Debugging Procedures204356
Node: dumpvars procedure205115
Node: dumplocals procedure205480
Node: dumprocs procedure205849
Node: dumpwatch procedure206249
Node: watcharray procedure206639
Node: watchvar procedure206918
Node: watchunset procedure207137
Node: watchwrite procedure207454
Node: watchread procedure207801
Node: watchdel procedure208140
Node: print procedure208431
Node: quit procedure208703
Node: File Map208919
Node: Unit Testing API209564
Node: C Unit Testing API209736
Node: pass function210242
Node: fail function210448
Node: untested function210683
Node: unresolved function210958
Node: totals function211332
Node: C++ Unit Testing API211558
Node: pass method212061
Node: fail method212272
Node: untested method212510
Node: unresolved method212788
Node: totals method213165

End Tag Table


Local Variables:
coding: us-ascii
End: