Merge "feat(SPMD): route secure interrupts to SPMC" into integration
diff --git a/Makefile b/Makefile
index e5ab324..2a1d4d8 100644
--- a/Makefile
+++ b/Makefile
@@ -1318,7 +1318,8 @@
echo " with ${CHECKPATCH_OPTS} option(s)"; \
fi
${Q}COMMON_COMMIT=$$(git merge-base HEAD ${BASE_COMMIT}); \
- for commit in `git rev-list $$COMMON_COMMIT..HEAD`; do \
+ for commit in `git rev-list --no-merges $$COMMON_COMMIT..HEAD`; \
+ do \
printf "\n[*] Checking style of '$$commit'\n\n"; \
git log --format=email "$$commit~..$$commit" \
-- ${CHECK_PATHS} | \
diff --git a/bl32/tsp/tsp_main.c b/bl32/tsp/tsp_main.c
index 01c9ec5..55e1532 100644
--- a/bl32/tsp/tsp_main.c
+++ b/bl32/tsp/tsp_main.c
@@ -5,6 +5,8 @@
*/
#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
#include <arch_features.h>
#include <arch_helpers.h>
@@ -271,7 +273,7 @@
#if LOG_LEVEL >= LOG_LEVEL_INFO
spin_lock(&console_lock);
- INFO("TSP: cpu 0x%lx resumed. maximum off power level %lld\n",
+ INFO("TSP: cpu 0x%lx resumed. maximum off power level %" PRId64 "\n",
read_mpidr(), max_off_pwrlvl);
INFO("TSP: cpu 0x%lx: %d smcs, %d erets %d cpu resume requests\n",
read_mpidr(),
@@ -375,7 +377,7 @@
#if LOG_LEVEL >= LOG_LEVEL_INFO
spin_lock(&console_lock);
- INFO("TSP: cpu 0x%lx received %s smc 0x%llx\n", read_mpidr(),
+ INFO("TSP: cpu 0x%lx received %s smc 0x%" PRIx64 "\n", read_mpidr(),
((func >> 31) & 1) == 1 ? "fast" : "yielding",
func);
INFO("TSP: cpu 0x%lx: %d smcs, %d erets\n", read_mpidr(),
diff --git a/common/fdt_fixup.c b/common/fdt_fixup.c
index 46606fb..de02b46 100644
--- a/common/fdt_fixup.c
+++ b/common/fdt_fixup.c
@@ -398,6 +398,7 @@
* fdt_adjust_gic_redist() - Adjust GICv3 redistributor size
* @dtb: Pointer to the DT blob in memory
* @nr_cores: Number of CPU cores on this system.
+ * @gicr_base: Base address of the first GICR frame, or ~0 if unchanged
* @gicr_frame_size: Size of the GICR frame per core
*
* On a GICv3 compatible interrupt controller, the redistributor provides
@@ -410,17 +411,19 @@
* A GICv4 compatible redistributor uses four 64K pages per core, whereas GICs
* without support for direct injection of virtual interrupts use two 64K pages.
* The @gicr_frame_size parameter should be 262144 and 131072, respectively.
+ * Also optionally allow adjusting the GICR frame base address, when this is
+ * different due to ITS frames between distributor and redistributor.
*
* Return: 0 on success, negative error value otherwise.
*/
int fdt_adjust_gic_redist(void *dtb, unsigned int nr_cores,
- unsigned int gicr_frame_size)
+ uintptr_t gicr_base, unsigned int gicr_frame_size)
{
int offset = fdt_node_offset_by_compatible(dtb, 0, "arm,gic-v3");
- uint64_t redist_size_64;
- uint32_t redist_size_32;
+ uint64_t reg_64;
+ uint32_t reg_32;
void *val;
- int parent;
+ int parent, ret;
int ac, sc;
if (offset < 0) {
@@ -437,13 +440,34 @@
return -EINVAL;
}
+ if (gicr_base != INVALID_BASE_ADDR) {
+ if (ac == 1) {
+ reg_32 = cpu_to_fdt32(gicr_base);
+ val = ®_32;
+ } else {
+ reg_64 = cpu_to_fdt64(gicr_base);
+ val = ®_64;
+ }
+ /*
+ * The redistributor base address is the second address in
+ * the "reg" entry, so we have to skip one address and one
+ * size cell.
+ */
+ ret = fdt_setprop_inplace_namelen_partial(dtb, offset,
+ "reg", 3,
+ (ac + sc) * 4,
+ val, ac * 4);
+ if (ret < 0) {
+ return ret;
+ }
+ }
+
if (sc == 1) {
- redist_size_32 = cpu_to_fdt32(nr_cores * gicr_frame_size);
- val = &redist_size_32;
+ reg_32 = cpu_to_fdt32(nr_cores * gicr_frame_size);
+ val = ®_32;
} else {
- redist_size_64 = cpu_to_fdt64(nr_cores *
- (uint64_t)gicr_frame_size);
- val = &redist_size_64;
+ reg_64 = cpu_to_fdt64(nr_cores * (uint64_t)gicr_frame_size);
+ val = ®_64;
}
/*
diff --git a/common/fdt_wrappers.c b/common/fdt_wrappers.c
index 64e01ea..2a9673f 100644
--- a/common/fdt_wrappers.c
+++ b/common/fdt_wrappers.c
@@ -8,6 +8,8 @@
#include <assert.h>
#include <errno.h>
+#include <inttypes.h>
+#include <stdint.h>
#include <string.h>
#include <libfdt.h>
@@ -35,7 +37,7 @@
/* Access property and obtain its length (in bytes) */
prop = fdt_getprop(dtb, node, prop_name, &value_len);
if (prop == NULL) {
- WARN("Couldn't find property %s in dtb\n", prop_name);
+ VERBOSE("Couldn't find property %s in dtb\n", prop_name);
return -FDT_ERR_NOTFOUND;
}
@@ -402,7 +404,7 @@
addr_range = fdt_read_prop_cells(value + child_addr_size +
parent_addr_size,
range_size);
- VERBOSE("DT: Address %llx mapped to %llx with range %llx\n",
+ VERBOSE("DT: Address %" PRIx64 " mapped to %" PRIx64 " with range %" PRIx64 "\n",
local_address, parent_address, addr_range);
/* Perform range check */
@@ -413,8 +415,8 @@
/* Found hit for the addr range that needs to be translated */
*translated_addr = parent_address + (base_address - local_address);
- VERBOSE("DT: child address %llx mapped to %llx in parent bus\n",
- local_address, parent_address);
+ VERBOSE("DT: child address %" PRIx64 "mapped to %" PRIx64 " in parent bus\n",
+ local_address, parent_address);
return true;
}
@@ -470,8 +472,8 @@
next_entry = next_entry + ncells_xlat;
}
- INFO("DT: No translation found for address %llx in node %s\n",
- base_address, fdt_get_name(dtb, local_bus, NULL));
+ INFO("DT: No translation found for address %" PRIx64 " in node %s\n",
+ base_address, fdt_get_name(dtb, local_bus, NULL));
return ILLEGAL_ADDR;
}
diff --git a/docs/design/cpu-specific-build-macros.rst b/docs/design/cpu-specific-build-macros.rst
index eebeaa2..9d0dd5e 100644
--- a/docs/design/cpu-specific-build-macros.rst
+++ b/docs/design/cpu-specific-build-macros.rst
@@ -288,6 +288,10 @@
CPU. This needs to be enabled for revisions r0p0, r1p0, r1p1, and r1p2. It
is still open.
+- ``ERRATA_A78_2242635``: This applies errata 2242635 workaround to Cortex-A78
+ CPU. This needs to be enabled for revisions r1p0, r1p1, and r1p2. The issue
+ is present in r0p0 but there is no workaround. It is still open.
+
For Cortex-A78 AE, the following errata build flags are defined :
- ``ERRATA_A78_AE_1941500`` : This applies errata 1941500 workaround to Cortex-A78
@@ -340,11 +344,6 @@
CPU. This needs to be enabled for revisions r3p0, r3p1, r4p0, and r4p1, for
revisions r0p0, r1p0, and r2p0 there is no workaround.
-For Neoverse N2, the following errata build flags are defined :
-
-- ``ERRATA_N2_2002655``: This applies errata 2002655 workaround to Neoverse-N2
- CPU. This needs to be enabled for revision r0p0 of the CPU, it is still open.
-
For Neoverse V1, the following errata build flags are defined :
- ``ERRATA_V1_1774420``: This applies errata 1774420 workaround to Neoverse-V1
@@ -379,6 +378,11 @@
CPU. This needs to be enabled for revisions r0p0, r1p0, and r1p1 of the CPU.
It is still open.
+- ``ERRATA_V1_2216392``: This applies errata 2216392 workaround to Neoverse-V1
+ CPU. This needs to be enabled for revisions r1p0 and r1p1 of the CPU, the
+ issue is present in r0p0 as well but there is no workaround for that
+ revision. It is still open.
+
For Cortex-A710, the following errata build flags are defined :
- ``ERRATA_A710_1987031``: This applies errata 1987031 workaround to
@@ -407,6 +411,9 @@
For Neoverse N2, the following errata build flags are defined :
+- ``ERRATA_N2_2002655``: This applies errata 2002655 workaround to Neoverse-N2
+ CPU. This needs to be enabled for revision r0p0 of the CPU, it is still open.
+
- ``ERRATA_N2_2067956``: This applies errata 2067956 workaround to Neoverse-N2
CPU. This needs to be enabled for revision r0p0 of the CPU and is still open.
@@ -422,6 +429,18 @@
- ``ERRATA_N2_2138953``: This applies errata 2138953 workaround to Neoverse-N2
CPU. This needs to be enabled for revision r0p0 of the CPU and is still open.
+- ``ERRATA_N2_2242415``: This applies errata 2242415 workaround to Neoverse-N2
+ CPU. This needs to be enabled for revision r0p0 of the CPU and is still open.
+
+- ``ERRATA_N2_2138958``: This applies errata 2138958 workaround to Neoverse-N2
+ CPU. This needs to be enabled for revision r0p0 of the CPU and is still open.
+
+- ``ERRATA_N2_2242400``: This applies errata 2242400 workaround to Neoverse-N2
+ CPU. This needs to be enabled for revision r0p0 of the CPU and is still open.
+
+- ``ERRATA_N2_2280757``: This applies errata 2280757 workaround to Neoverse-N2
+ CPU. This needs to be enabled for revision r0p0 of the CPU and is still open.
+
DSU Errata Workarounds
----------------------
diff --git a/docs/plat/arm/fvp/index.rst b/docs/plat/arm/fvp/index.rst
index d41982f..2aaf195 100644
--- a/docs/plat/arm/fvp/index.rst
+++ b/docs/plat/arm/fvp/index.rst
@@ -12,51 +12,50 @@
(64-bit host machine only).
.. note::
- The FVP models used are Version 11.15 Build 14, unless otherwise stated.
+ The FVP models used are Version 11.16 Build 16, unless otherwise stated.
-- ``FVP_Base_AEMvA``
-- ``FVP_Base_AEMv8A-AEMv8A``
+- ``Foundation_Platform``
- ``FVP_Base_AEMv8A-AEMv8A-AEMv8A-AEMv8A-CCN502``
-- ``FVP_Base_RevC-2xAEMvA``
-- ``FVP_Base_Cortex-A32x4`` (Version 11.12 build 38)
+- ``FVP_Base_AEMv8A-AEMv8A`` (For certain configurations also uses 11.14/21)
+- ``FVP_Base_AEMv8A-GIC600AE``
+- ``FVP_Base_AEMvA`` (For certain configurations also uses 0.0/6684)
+- ``FVP_Base_Cortex-A32x4`` (Version 11.12/38)
- ``FVP_Base_Cortex-A35x4``
- ``FVP_Base_Cortex-A53x4``
-- ``FVP_Base_Cortex-A55x4+Cortex-A75x4``
- ``FVP_Base_Cortex-A55x4``
+- ``FVP_Base_Cortex-A55x4+Cortex-A75x4``
- ``FVP_Base_Cortex-A57x1-A53x1``
- ``FVP_Base_Cortex-A57x2-A53x4``
- ``FVP_Base_Cortex-A57x4-A53x4``
- ``FVP_Base_Cortex-A57x4``
-- ``FVP_Base_Cortex-A65x4``
- ``FVP_Base_Cortex-A65AEx8``
+- ``FVP_Base_Cortex-A65x4``
+- ``FVP_Base_Cortex-A710x4``
- ``FVP_Base_Cortex-A72x4-A53x4``
- ``FVP_Base_Cortex-A72x4``
- ``FVP_Base_Cortex-A73x4-A53x4``
- ``FVP_Base_Cortex-A73x4``
- ``FVP_Base_Cortex-A75x4``
-- ``FVP_Base_Cortex-A76x4``
- ``FVP_Base_Cortex-A76AEx4``
- ``FVP_Base_Cortex-A76AEx8``
+- ``FVP_Base_Cortex-A76x4``
- ``FVP_Base_Cortex-A77x4``
- ``FVP_Base_Cortex-A78x4``
-- ``FVP_Base_Cortex-A710x4``
-- ``FVP_Morello`` (Version 0.10 build 542)
- ``FVP_Base_Neoverse-E1x1``
- ``FVP_Base_Neoverse-E1x2``
- ``FVP_Base_Neoverse-E1x4``
- ``FVP_Base_Neoverse-N1x4``
- ``FVP_Base_Neoverse-N2x4`` (Version 11.12 build 38)
- ``FVP_Base_Neoverse-V1x4``
-- ``FVP_CSS_SGI-575`` (Version 11.10 build 36)
-- ``FVP_CSS_SGM-775``
-- ``FVP_RD_E1_edge`` (Version 11.9 build 41)
-- ``FVP_RD_N1_edge`` (Version 11.10 build 36)
-- ``FVP_RD_N1_edge_dual`` (Version 11.10 build 36)
-- ``FVP_RD_Daniel`` (Version 11.13 build 10)
-- ``FVP_RD_N2`` (Version 11.13 build 10)
-- ``FVP_TC0`` (Version 0.0 build 6509)
-- ``FVP_Base_AEMv8A-GIC600AE`` (Version 0.0 build 6415)
-- ``Foundation_Platform``
+- ``FVP_Base_RevC-2xAEMvA`` (For certain configurations also uses 0.0/6557)
+- ``FVP_CSS_SGI-575`` (Version 11.15/26)
+- ``FVP_Morello`` (Version 0.11/19)
+- ``FVP_RD_E1_edge`` (Version 11.15/26)
+- ``FVP_RD_N1_edge_dual`` (Version 11.15/26)
+- ``FVP_RD_N1_edge`` (Version 11.15/26)
+- ``FVP_RD_V1`` (Version 11.15/26)
+- ``FVP_TC0``
+- ``FVP_TC1``
The latest version of the AArch32 build of TF-A has been tested on the
following Arm FVPs without shifted affinities, and that do not support threaded
diff --git a/drivers/arm/gic/v3/gicv3_helpers.c b/drivers/arm/gic/v3/gicv3_helpers.c
index d752013..753d995 100644
--- a/drivers/arm/gic/v3/gicv3_helpers.c
+++ b/drivers/arm/gic/v3/gicv3_helpers.c
@@ -393,3 +393,18 @@
return count;
}
+
+unsigned int gicv3_get_component_partnum(const uintptr_t gic_frame)
+{
+ unsigned int part_id;
+
+ /*
+ * The lower 8 bits of PIDR0, complemented by the lower 4 bits of
+ * PIDR1 contain a part number identifying the GIC component at a
+ * particular base address.
+ */
+ part_id = mmio_read_32(gic_frame + GICD_PIDR0_GICV3) & 0xff;
+ part_id |= (mmio_read_32(gic_frame + GICD_PIDR1_GICV3) << 8) & 0xf00;
+
+ return part_id;
+}
diff --git a/drivers/brcm/emmc/emmc_csl_sdcard.c b/drivers/brcm/emmc/emmc_csl_sdcard.c
index d6ad4bc..9e2c618 100644
--- a/drivers/brcm/emmc/emmc_csl_sdcard.c
+++ b/drivers/brcm/emmc/emmc_csl_sdcard.c
@@ -4,9 +4,11 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <inttypes.h>
+#include <stddef.h>
+#include <stdint.h>
#include <stdlib.h>
#include <string.h>
-#include <stddef.h>
#include <arch_helpers.h>
#include <lib/mmio.h>
@@ -521,7 +523,7 @@
{
int rc = SD_OK;
- VERBOSE("XFER: dest: 0x%llx, addr: 0x%x, size: 0x%x bytes\n",
+ VERBOSE("XFER: dest: 0x%" PRIx64 ", addr: 0x%x, size: 0x%x bytes\n",
(uint64_t)base, addr, length);
if ((length / handle->device->cfg.blockSize) > 1) {
diff --git a/drivers/marvell/amb_adec.c b/drivers/marvell/amb_adec.c
index 1f67105..d78fa25 100644
--- a/drivers/marvell/amb_adec.c
+++ b/drivers/marvell/amb_adec.c
@@ -7,6 +7,9 @@
/* AXI to M-Bridge decoding unit driver for Marvell Armada 8K and 8K+ SoCs */
+#include <inttypes.h>
+#include <stdint.h>
+
#include <common/debug.h>
#include <lib/mmio.h>
@@ -44,10 +47,10 @@
/* make sure the base address is in 16-bit range */
if (win->base_addr > AMB_BASE_ADDR_MASK) {
- WARN("Window %d: base address is too big 0x%llx\n",
+ WARN("Window %d: base address is too big 0x%" PRIx64 "\n",
win_num, win->base_addr);
win->base_addr = AMB_BASE_ADDR_MASK;
- WARN("Set the base address to 0x%llx\n", win->base_addr);
+ WARN("Set the base address to 0x%" PRIx64 "\n", win->base_addr);
}
base_addr = win->base_addr << AMB_BASE_OFFSET;
@@ -57,15 +60,15 @@
win->base_addr = ALIGN_UP(base_addr, AMB_WIN_ALIGNMENT_1M);
WARN("Window %d: base address unaligned to 0x%x\n",
win_num, AMB_WIN_ALIGNMENT_1M);
- WARN("Align up the base address to 0x%llx\n", win->base_addr);
+ WARN("Align up the base address to 0x%" PRIx64 "\n", win->base_addr);
}
/* size parameter validity check */
if (!IS_POWER_OF_2(win->win_size)) {
- WARN("Window %d: window size is not power of 2 (0x%llx)\n",
+ WARN("Window %d: window size is not power of 2 (0x%" PRIx64 ")\n",
win_num, win->win_size);
win->win_size = ROUND_UP_TO_POW_OF_2(win->win_size);
- WARN("Rounding size to 0x%llx\n", win->win_size);
+ WARN("Rounding size to 0x%" PRIx64 "\n", win->win_size);
}
}
diff --git a/drivers/marvell/ccu.c b/drivers/marvell/ccu.c
index b4251f4..c206f11 100644
--- a/drivers/marvell/ccu.c
+++ b/drivers/marvell/ccu.c
@@ -7,6 +7,9 @@
/* CCU unit device driver for Marvell AP807, AP807 and AP810 SoCs */
+#include <inttypes.h>
+#include <stdint.h>
+
#include <common/debug.h>
#include <drivers/marvell/ccu.h>
#include <lib/mmio.h>
@@ -84,7 +87,7 @@
win_id));
start = ((uint64_t)alr << ADDRESS_SHIFT);
end = (((uint64_t)ahr + 0x10) << ADDRESS_SHIFT);
- printf("\tccu%d %02x 0x%016llx 0x%016llx\n",
+ printf("\tccu%d %02x 0x%016" PRIx64 " 0x%016" PRIx64 "\n",
win_id, target_id, start, end);
}
}
@@ -99,14 +102,14 @@
/* check if address is aligned to 1M */
if (IS_NOT_ALIGN(win->base_addr, CCU_WIN_ALIGNMENT)) {
win->base_addr = ALIGN_UP(win->base_addr, CCU_WIN_ALIGNMENT);
- NOTICE("%s: Align up the base address to 0x%llx\n",
+ NOTICE("%s: Align up the base address to 0x%" PRIx64 "\n",
__func__, win->base_addr);
}
/* size parameter validity check */
if (IS_NOT_ALIGN(win->win_size, CCU_WIN_ALIGNMENT)) {
win->win_size = ALIGN_UP(win->win_size, CCU_WIN_ALIGNMENT);
- NOTICE("%s: Aligning size to 0x%llx\n",
+ NOTICE("%s: Aligning size to 0x%" PRIx64 "\n",
__func__, win->win_size);
}
}
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.c b/drivers/marvell/comphy/phy-comphy-cp110.c
index e7cde75..fa9fe41 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.c
+++ b/drivers/marvell/comphy/phy-comphy-cp110.c
@@ -8,6 +8,8 @@
/* Marvell CP110 SoC COMPHY unit driver */
#include <errno.h>
+#include <inttypes.h>
+#include <stdint.h>
#include <common/debug.h>
#include <drivers/delay_timer.h>
@@ -102,7 +104,7 @@
*cp_nr = (((comphy_base & ~0xffffff) - MVEBU_AP_IO_BASE(*ap_nr)) /
MVEBU_CP_OFFSET);
- debug("cp_base 0x%llx, ap_io_base 0x%lx, cp_offset 0x%lx\n",
+ debug("cp_base 0x%" PRIx64 ", ap_io_base 0x%lx, cp_offset 0x%lx\n",
comphy_base, (unsigned long)MVEBU_AP_IO_BASE(*ap_nr),
(unsigned long)MVEBU_CP_OFFSET);
}
diff --git a/drivers/marvell/gwin.c b/drivers/marvell/gwin.c
index 9d94308..fa59cb0 100644
--- a/drivers/marvell/gwin.c
+++ b/drivers/marvell/gwin.c
@@ -7,6 +7,9 @@
/* GWIN unit device driver for Marvell AP810 SoC */
+#include <inttypes.h>
+#include <stdint.h>
+
#include <common/debug.h>
#include <drivers/marvell/gwin.h>
#include <lib/mmio.h>
@@ -49,14 +52,14 @@
/* The base is always 64M aligned */
if (IS_NOT_ALIGN(win->base_addr, GWIN_ALIGNMENT_64M)) {
win->base_addr &= ~(GWIN_ALIGNMENT_64M - 1);
- NOTICE("%s: Align the base address to 0x%llx\n",
+ NOTICE("%s: Align the base address to 0x%" PRIx64 "\n",
__func__, win->base_addr);
}
/* size parameter validity check */
if (IS_NOT_ALIGN(win->win_size, GWIN_ALIGNMENT_64M)) {
win->win_size = ALIGN_UP(win->win_size, GWIN_ALIGNMENT_64M);
- NOTICE("%s: Aligning window size to 0x%llx\n",
+ NOTICE("%s: Aligning window size to 0x%" PRIx64 "\n",
__func__, win->win_size);
}
}
@@ -167,7 +170,7 @@
alr = (alr >> ADDRESS_LSHIFT) << ADDRESS_RSHIFT;
ahr = mmio_read_32(GWIN_AHR_OFFSET(ap_index, win_num));
ahr = (ahr >> ADDRESS_LSHIFT) << ADDRESS_RSHIFT;
- printf("\tgwin %d 0x%016llx 0x%016llx\n",
+ printf("\tgwin %d 0x%016" PRIx64 " 0x%016" PRIx64 "\n",
(cr >> 8) & 0xF, alr, ahr);
}
}
diff --git a/drivers/marvell/io_win.c b/drivers/marvell/io_win.c
index c4257fa..124382a 100644
--- a/drivers/marvell/io_win.c
+++ b/drivers/marvell/io_win.c
@@ -7,6 +7,9 @@
/* IO Window unit device driver for Marvell AP807, AP807 and AP810 SoCs */
+#include <inttypes.h>
+#include <stdint.h>
+
#include <common/debug.h>
#include <drivers/marvell/io_win.h>
#include <lib/mmio.h>
@@ -44,14 +47,14 @@
/* check if address is aligned to 1M */
if (IS_NOT_ALIGN(win->base_addr, IO_WIN_ALIGNMENT_1M)) {
win->base_addr = ALIGN_UP(win->base_addr, IO_WIN_ALIGNMENT_1M);
- NOTICE("%s: Align up the base address to 0x%llx\n",
+ NOTICE("%s: Align up the base address to 0x%" PRIx64 "\n",
__func__, win->base_addr);
}
/* size parameter validity check */
if (IS_NOT_ALIGN(win->win_size, IO_WIN_ALIGNMENT_1M)) {
win->win_size = ALIGN_UP(win->win_size, IO_WIN_ALIGNMENT_1M);
- NOTICE("%s: Aligning size to 0x%llx\n",
+ NOTICE("%s: Aligning size to 0x%" PRIx64 "\n",
__func__, win->win_size);
}
}
@@ -170,7 +173,7 @@
win_id));
start = ((uint64_t)alr << ADDRESS_SHIFT);
end = (((uint64_t)ahr + 0x10) << ADDRESS_SHIFT);
- printf("\tio-win %d 0x%016llx 0x%016llx\n",
+ printf("\tio-win %d 0x%016" PRIx64 " 0x%016" PRIx64 "\n",
trgt_id, start, end);
}
}
diff --git a/drivers/marvell/iob.c b/drivers/marvell/iob.c
index 29088aa..1f39395 100644
--- a/drivers/marvell/iob.c
+++ b/drivers/marvell/iob.c
@@ -7,6 +7,9 @@
/* IOW unit device driver for Marvell CP110 and CP115 SoCs */
+#include <inttypes.h>
+#include <stdint.h>
+
#include <arch_helpers.h>
#include <common/debug.h>
#include <drivers/marvell/iob.h>
@@ -57,7 +60,7 @@
win->base_addr = ALIGN_UP(win->base_addr, IOB_WIN_ALIGNMENT);
ERROR("Window %d: base address unaligned to 0x%x\n",
win_num, IOB_WIN_ALIGNMENT);
- printf("Align up the base address to 0x%llx\n",
+ printf("Align up the base address to 0x%" PRIx64 "\n",
win->base_addr);
}
@@ -66,7 +69,7 @@
win->win_size = ALIGN_UP(win->win_size, IOB_WIN_ALIGNMENT);
ERROR("Window %d: window size unaligned to 0x%x\n", win_num,
IOB_WIN_ALIGNMENT);
- printf("Aligning size to 0x%llx\n", win->win_size);
+ printf("Aligning size to 0x%" PRIx64 "\n", win->win_size);
}
}
@@ -130,7 +133,7 @@
*/
end = start + (16 << 20);
}
- printf("iob %02d %s 0x%016llx 0x%016llx\n",
+ printf("iob %02d %s 0x%016" PRIx64 " 0x%016" PRIx64 "\n",
win_id, iob_target_name[target_id],
start, end);
}
diff --git a/drivers/marvell/mc_trustzone/mc_trustzone.c b/drivers/marvell/mc_trustzone/mc_trustzone.c
index 52b3006..648bd0e 100644
--- a/drivers/marvell/mc_trustzone/mc_trustzone.c
+++ b/drivers/marvell/mc_trustzone/mc_trustzone.c
@@ -5,6 +5,9 @@
* https://spdx.org/licenses
*/
+#include <inttypes.h>
+#include <stdint.h>
+
#include <common/debug.h>
#include <drivers/marvell/addr_map.h>
#include <lib/mmio.h>
@@ -39,7 +42,7 @@
/* map the window size to trustzone register convention */
tz_size = fls(TZ_SIZE(win->win_size));
- VERBOSE("%s: window size = 0x%llx maps to tz_size %d\n",
+ VERBOSE("%s: window size = 0x%" PRIx64 " maps to tz_size %d\n",
__func__, win->win_size, tz_size);
if (tz_size < 0 || tz_size > 31) {
ERROR("Using not allowed size for MC TrustZone window %d!\n",
@@ -49,7 +52,7 @@
if (base & 0xfff) {
base = base & ~0xfff;
- WARN("Attempt to open MC TZ win. at 0x%llx, truncate to 0x%x\n",
+ WARN("Attempt to open MC TZ win. at 0x%" PRIx64 ", truncate to 0x%x\n",
win->base_addr, base);
}
diff --git a/drivers/mtd/spi-mem/spi_mem.c b/drivers/mtd/spi-mem/spi_mem.c
index 63ea769..010e8b6 100644
--- a/drivers/mtd/spi-mem/spi_mem.c
+++ b/drivers/mtd/spi-mem/spi_mem.c
@@ -5,6 +5,8 @@
*/
#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
#include <libfdt.h>
@@ -150,7 +152,7 @@
const struct spi_bus_ops *ops = spi_slave.ops;
int ret;
- VERBOSE("%s: cmd:%x mode:%d.%d.%d.%d addqr:%llx len:%x\n",
+ VERBOSE("%s: cmd:%x mode:%d.%d.%d.%d addqr:%" PRIx64 " len:%x\n",
__func__, op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
op->dummy.buswidth, op->data.buswidth,
op->addr.val, op->data.nbytes);
diff --git a/drivers/nxp/ddr/nxp-ddr/ddr.c b/drivers/nxp/ddr/nxp-ddr/ddr.c
index 216e05c..c051b3b 100644
--- a/drivers/nxp/ddr/nxp-ddr/ddr.c
+++ b/drivers/nxp/ddr/nxp-ddr/ddr.c
@@ -5,6 +5,7 @@
*/
#include <errno.h>
+#include <inttypes.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
@@ -850,7 +851,7 @@
priv->ip_rev = ip_rev;
#ifndef CONFIG_STATIC_DDR
- INFO("time base %llu ms\n", time_base);
+ INFO("time base %" PRIu64 " ms\n", time_base);
debug("Parse DIMM SPD(s)\n");
valid_spd_mask = parse_spd(priv);
@@ -870,7 +871,7 @@
#endif
time = get_timer_val(time_base);
- INFO("Time after parsing SPD %llu ms\n", time);
+ INFO("Time after parsing SPD %" PRIu64 " ms\n", time);
debug("Synthesize configurations\n");
ret = synthesize_ctlr(priv);
if (ret != 0) {
@@ -911,7 +912,7 @@
}
time = get_timer_val(time_base);
- INFO("Time before programming controller %llu ms\n", time);
+ INFO("Time before programming controller %" PRIu64 " ms\n", time);
debug("Program controller registers\n");
ret = write_ddrc_regs(priv);
if (ret != 0) {
@@ -924,7 +925,7 @@
print_ddr_info(priv->ddr[0]);
time = get_timer_val(time_base);
- INFO("Time used by DDR driver %llu ms\n", time);
+ INFO("Time used by DDR driver %" PRIu64 " ms\n", time);
return dram_size;
}
diff --git a/drivers/usb/usb_device.c b/drivers/usb/usb_device.c
index ce02d4f..031e678 100644
--- a/drivers/usb/usb_device.c
+++ b/drivers/usb/usb_device.c
@@ -73,8 +73,7 @@
break;
case USB_DESC_TYPE_CONFIGURATION:
- pbuf = (uint8_t *)pdev->desc->get_config_desc(&len);
- pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ pbuf = pdev->desc->get_config_desc(&len);
break;
case USB_DESC_TYPE_STRING:
@@ -112,12 +111,15 @@
break;
case USB_DESC_TYPE_DEVICE_QUALIFIER:
- pbuf = (uint8_t *)pdev->desc->get_device_qualifier_desc(&len);
+ pbuf = pdev->desc->get_device_qualifier_desc(&len);
break;
case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION:
- pbuf = (uint8_t *)pdev->desc->get_config_desc(&len);
- pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION;
+ if (pdev->desc->get_other_speed_config_desc == NULL) {
+ usb_core_ctl_error(pdev);
+ return;
+ }
+ pbuf = pdev->desc->get_other_speed_config_desc(&len);
break;
default:
@@ -174,7 +176,7 @@
pdev->dev_config = cfgidx;
pdev->class->de_init(pdev, cfgidx);
} else if (cfgidx != pdev->dev_config) {
- if (pdev->class != NULL) {
+ if (pdev->class == NULL) {
usb_core_ctl_error(pdev);
return;
}
@@ -611,6 +613,17 @@
return USBD_OK;
}
+static void usb_core_start_xfer(struct usb_handle *pdev,
+ void *handle,
+ struct usbd_ep *ep)
+{
+ if (ep->num == 0U) {
+ pdev->driver->ep0_start_xfer(handle, ep);
+ } else {
+ pdev->driver->ep_start_xfer(handle, ep);
+ }
+}
+
/*
* usb_core_receive
* Receive an amount of data
@@ -640,11 +653,7 @@
ep->is_in = false;
ep->num = num;
- if (num == 0U) {
- pdev->driver->ep0_start_xfer(hpcd->instance, ep);
- } else {
- pdev->driver->ep_start_xfer(hpcd->instance, ep);
- }
+ usb_core_start_xfer(pdev, hpcd->instance, ep);
return USBD_OK;
}
@@ -678,11 +687,7 @@
ep->is_in = true;
ep->num = num;
- if (num == 0U) {
- pdev->driver->ep0_start_xfer(hpcd->instance, ep);
- } else {
- pdev->driver->ep_start_xfer(hpcd->instance, ep);
- }
+ usb_core_start_xfer(pdev, hpcd->instance, ep);
return USBD_OK;
}
diff --git a/fdts/arm_fpga.dts b/fdts/arm_fpga.dts
index b7b4f0e..c0efd09 100644
--- a/fdts/arm_fpga.dts
+++ b/fdts/arm_fpga.dts
@@ -40,7 +40,6 @@
timer {
compatible = "arm,armv8-timer";
- clock-frequency = <10000000>;
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
@@ -82,7 +81,7 @@
dbg_uart: serial@7ff80000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x0 0x7ff80000 0x0 0x00001000>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&uartclk>, <&bus_refclk>;
clock-names = "uartclk", "apb_pclk";
};
@@ -98,5 +97,12 @@
/* The GICR size will be adjusted at runtime to match the cores. */
<0x0 0x30040000 0x0 0x00020000>; /* GICR for one core */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+ its: msi-controller@30040000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0x30040000 0x0 0x40000>;
+ #msi-cells = <1>;
+ msi-controller;
+ };
};
};
diff --git a/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi b/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
index 6ca6293..c6d6434 100644
--- a/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
+++ b/fdts/stm32mp15-ddr3-1x4Gb-1066-binG.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
- * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2018-2021, STMicroelectronics - All Rights Reserved
*/
/*
diff --git a/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi b/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
index 548f69a..9614ab4 100644
--- a/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
+++ b/fdts/stm32mp15-ddr3-2x4Gb-1066-binG.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
- * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2018-2021, STMicroelectronics - All Rights Reserved
*/
/*
diff --git a/fdts/stm32mp15-pinctrl.dtsi b/fdts/stm32mp15-pinctrl.dtsi
index e8e6b9f..d74dc2b 100644
--- a/fdts/stm32mp15-pinctrl.dtsi
+++ b/fdts/stm32mp15-pinctrl.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Copyright (c) 2017-2021, STMicroelectronics - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
diff --git a/fdts/stm32mp151.dtsi b/fdts/stm32mp151.dtsi
index 3beabbb..ca93f0c 100644
--- a/fdts/stm32mp151.dtsi
+++ b/fdts/stm32mp151.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Copyright (c) 2017-2021, STMicroelectronics - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/fdts/stm32mp157c-ed1.dts b/fdts/stm32mp157c-ed1.dts
index a09c66a..11e0a61 100644
--- a/fdts/stm32mp157c-ed1.dts
+++ b/fdts/stm32mp157c-ed1.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2017-2019 - All Rights Reserved
+ * Copyright (c) 2017-2021, STMicroelectronics - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
/dts-v1/;
diff --git a/fdts/stm32mp157c-ev1.dts b/fdts/stm32mp157c-ev1.dts
index 4937514..02840a2 100644
--- a/fdts/stm32mp157c-ev1.dts
+++ b/fdts/stm32mp157c-ev1.dts
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2017-2019 - All Rights Reserved
+ * Copyright (c) 2017-2021, STMicroelectronics - All Rights Reserved
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
*/
/dts-v1/;
diff --git a/fdts/stm32mp157c-lxa-mc1.dts b/fdts/stm32mp157c-lxa-mc1.dts
index 31f1382..6f67712 100644
--- a/fdts/stm32mp157c-lxa-mc1.dts
+++ b/fdts/stm32mp157c-lxa-mc1.dts
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
/*
- * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (c) 2020-2021, STMicroelectronics - All Rights Reserved
* Copyright (C) 2020 Ahmad Fatoum, Pengutronix
*/
diff --git a/fdts/stm32mp15xx-dkx.dtsi b/fdts/stm32mp15xx-dkx.dtsi
index 69b4828..9cc5368 100644
--- a/fdts/stm32mp15xx-dkx.dtsi
+++ b/fdts/stm32mp15xx-dkx.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2019-2021, STMicroelectronics - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
diff --git a/fdts/stm32mp15xxaa-pinctrl.dtsi b/fdts/stm32mp15xxaa-pinctrl.dtsi
index 04f7a43..f1d540a 100644
--- a/fdts/stm32mp15xxaa-pinctrl.dtsi
+++ b/fdts/stm32mp15xxaa-pinctrl.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2019-2021, STMicroelectronics - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
diff --git a/fdts/stm32mp15xxab-pinctrl.dtsi b/fdts/stm32mp15xxab-pinctrl.dtsi
index 328dad1..b58c7e2 100644
--- a/fdts/stm32mp15xxab-pinctrl.dtsi
+++ b/fdts/stm32mp15xxab-pinctrl.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2019-2021, STMicroelectronics - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
diff --git a/fdts/stm32mp15xxac-pinctrl.dtsi b/fdts/stm32mp15xxac-pinctrl.dtsi
index 7eaa245..11e7e03 100644
--- a/fdts/stm32mp15xxac-pinctrl.dtsi
+++ b/fdts/stm32mp15xxac-pinctrl.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2019-2021, STMicroelectronics - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
diff --git a/fdts/stm32mp15xxad-pinctrl.dtsi b/fdts/stm32mp15xxad-pinctrl.dtsi
index b63e207..52806d6 100644
--- a/fdts/stm32mp15xxad-pinctrl.dtsi
+++ b/fdts/stm32mp15xxad-pinctrl.dtsi
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2019-2021, STMicroelectronics - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@st.com> for STMicroelectronics.
*/
diff --git a/include/common/fdt_fixup.h b/include/common/fdt_fixup.h
index 2e9d49d..7a590b2 100644
--- a/include/common/fdt_fixup.h
+++ b/include/common/fdt_fixup.h
@@ -7,13 +7,15 @@
#ifndef FDT_FIXUP_H
#define FDT_FIXUP_H
+#define INVALID_BASE_ADDR ((uintptr_t)~0UL)
+
int dt_add_psci_node(void *fdt);
int dt_add_psci_cpu_enable_methods(void *fdt);
int fdt_add_reserved_memory(void *dtb, const char *node_name,
uintptr_t base, size_t size);
int fdt_add_cpus_node(void *dtb, unsigned int afflv0,
unsigned int afflv1, unsigned int afflv2);
-int fdt_adjust_gic_redist(void *dtb, unsigned int nr_cores,
+int fdt_adjust_gic_redist(void *dtb, unsigned int nr_cores, uintptr_t gicr_base,
unsigned int gicr_frame_size);
#endif /* FDT_FIXUP_H */
diff --git a/include/drivers/arm/arm_gicv3_common.h b/include/drivers/arm/arm_gicv3_common.h
index e5df311..d1e93be 100644
--- a/include/drivers/arm/arm_gicv3_common.h
+++ b/include/drivers/arm/arm_gicv3_common.h
@@ -21,4 +21,8 @@
#define IIDR_MODEL_ARM_GIC_600AE U(0x0300043b)
#define IIDR_MODEL_ARM_GIC_700 U(0x0400043b)
+#define PIDR_COMPONENT_ARM_DIST U(0x492)
+#define PIDR_COMPONENT_ARM_REDIST U(0x493)
+#define PIDR_COMPONENT_ARM_ITS U(0x494)
+
#endif /* ARM_GICV3_COMMON_H */
diff --git a/include/drivers/arm/gicv3.h b/include/drivers/arm/gicv3.h
index fa8946b..5efefb6 100644
--- a/include/drivers/arm/gicv3.h
+++ b/include/drivers/arm/gicv3.h
@@ -104,6 +104,8 @@
#define GICD_IROUTER U(0x6000)
#define GICD_IROUTERE U(0x8000)
+#define GICD_PIDR0_GICV3 U(0xffe0)
+#define GICD_PIDR1_GICV3 U(0xffe4)
#define GICD_PIDR2_GICV3 U(0xffe8)
#define IGRPMODR_SHIFT 5
@@ -301,6 +303,8 @@
#define GITS_CTLR_ENABLED_BIT BIT_32(0)
#define GITS_CTLR_QUIESCENT_BIT BIT_32(1)
+#define GITS_TYPER_VSGI BIT_64(39)
+
#ifndef __ASSEMBLER__
#include <stdbool.h>
@@ -324,6 +328,8 @@
#endif
}
+unsigned int gicv3_get_component_partnum(const uintptr_t gic_frame);
+
static inline bool gicv3_is_intr_id_special_identifier(unsigned int id)
{
return (id >= PENDING_G1S_INTID) && (id <= GIC_SPURIOUS_INTERRUPT);
diff --git a/include/drivers/usb_device.h b/include/drivers/usb_device.h
index e21e315..8fdb6ae 100644
--- a/include/drivers/usb_device.h
+++ b/include/drivers/usb_device.h
@@ -166,6 +166,8 @@
uint8_t *(*get_usr_desc)(uint8_t index, uint16_t *length);
uint8_t *(*get_config_desc)(uint16_t *length);
uint8_t *(*get_device_qualifier_desc)(uint16_t *length);
+ /* optional: high speed capable device operating at its other speed */
+ uint8_t *(*get_other_speed_config_desc)(uint16_t *length);
};
/* USB Device handle structure */
diff --git a/include/lib/cpus/aarch64/neoverse_n2.h b/include/lib/cpus/aarch64/neoverse_n2.h
index f414cb5..a1e676e 100644
--- a/include/lib/cpus/aarch64/neoverse_n2.h
+++ b/include/lib/cpus/aarch64/neoverse_n2.h
@@ -28,6 +28,7 @@
******************************************************************************/
#define NEOVERSE_N2_CPUACTLR_EL1 S3_0_C15_C1_0
#define NEOVERSE_N2_CPUACTLR_EL1_BIT_46 (ULL(1) << 46)
+#define NEOVERSE_N2_CPUACTLR_EL1_BIT_22 (ULL(1) << 22)
/*******************************************************************************
* CPU Auxiliary Control register 2 specific definitions.
@@ -40,6 +41,8 @@
******************************************************************************/
#define NEOVERSE_N2_CPUACTLR5_EL1 S3_0_C15_C8_0
#define NEOVERSE_N2_CPUACTLR5_EL1_BIT_44 (ULL(1) << 44)
+#define NEOVERSE_N2_CPUACTLR5_EL1_BIT_13 (ULL(1) << 13)
+#define NEOVERSE_N2_CPUACTLR5_EL1_BIT_17 (ULL(1) << 17)
/*******************************************************************************
* CPU Auxiliary Control register specific definitions.
diff --git a/include/lib/libc/aarch32/inttypes_.h b/include/lib/libc/aarch32/inttypes_.h
new file mode 100644
index 0000000..11d2d35
--- /dev/null
+++ b/include/lib/libc/aarch32/inttypes_.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2020 Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/*
+ * Portions copyright (c) 2020, ARM Limited and Contributors.
+ * All rights reserved.
+ */
+
+#ifndef INTTYPES__H
+#define INTTYPES__H
+
+#define PRId64 "lld" /* int64_t */
+#define PRIi64 "lli" /* int64_t */
+#define PRIo64 "llo" /* int64_t */
+#define PRIu64 "llu" /* uint64_t */
+#define PRIx64 "llx" /* uint64_t */
+#define PRIX64 "llX" /* uint64_t */
+
+#endif /* INTTYPES__H */
diff --git a/include/lib/libc/aarch32/stdint_.h b/include/lib/libc/aarch32/stdint_.h
new file mode 100644
index 0000000..dafe142
--- /dev/null
+++ b/include/lib/libc/aarch32/stdint_.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2020 Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/*
+ * Portions copyright (c) 2020, ARM Limited and Contributors.
+ * All rights reserved.
+ */
+
+#ifndef STDINT__H
+#define STDINT__H
+
+#define INT64_MAX LLONG_MAX
+#define INT64_MIN LLONG_MIN
+#define UINT64_MAX ULLONG_MAX
+
+#define INT64_C(x) x ## LL
+#define UINT64_C(x) x ## ULL
+
+typedef long long int64_t;
+typedef unsigned long long uint64_t;
+typedef long long int64_least_t;
+typedef unsigned long long uint64_least_t;
+typedef long long int64_fast_t;
+typedef unsigned long long uint64_fast_t;
+
+#endif
diff --git a/include/lib/libc/aarch64/inttypes_.h b/include/lib/libc/aarch64/inttypes_.h
new file mode 100644
index 0000000..197d627
--- /dev/null
+++ b/include/lib/libc/aarch64/inttypes_.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2020 Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/*
+ * Portions copyright (c) 2020, ARM Limited and Contributors.
+ * All rights reserved.
+ */
+
+#ifndef INTTYPES__H
+#define INTTYPES__H
+
+#define PRId64 "ld" /* int64_t */
+#define PRIi64 "li" /* int64_t */
+#define PRIo64 "lo" /* int64_t */
+#define PRIu64 "lu" /* uint64_t */
+#define PRIx64 "lx" /* uint64_t */
+#define PRIX64 "lX" /* uint64_t */
+
+#endif /* INTTYPES__H */
diff --git a/include/lib/libc/aarch64/stdint_.h b/include/lib/libc/aarch64/stdint_.h
new file mode 100644
index 0000000..56e9f1b
--- /dev/null
+++ b/include/lib/libc/aarch64/stdint_.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2020 Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/*
+ * Portions copyright (c) 2020, ARM Limited and Contributors.
+ * All rights reserved.
+ */
+
+#ifndef STDINT__H
+#define STDINT__H
+
+#define INT64_MAX LONG_MAX
+#define INT64_MIN LONG_MIN
+#define UINT64_MAX ULONG_MAX
+
+#define INT64_C(x) x ## L
+#define UINT64_C(x) x ## UL
+
+typedef long int64_t;
+typedef unsigned long uint64_t;
+typedef long int64_least_t;
+typedef unsigned long uint64_least_t;
+typedef long int64_fast_t;
+typedef unsigned long uint64_fast_t;
+
+typedef __int128 int128_t;
+typedef unsigned __int128 uint128_t;
+
+#endif
diff --git a/include/lib/libc/inttypes.h b/include/lib/libc/inttypes.h
new file mode 100644
index 0000000..0f9e8c6
--- /dev/null
+++ b/include/lib/libc/inttypes.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2020 Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/*
+ * Portions copyright (c) 2020, ARM Limited and Contributors.
+ * All rights reserved.
+ */
+
+#ifndef INTTYPES_H
+#define INTTYPES_H
+
+#include <inttypes_.h>
+#include <stdint.h>
+
+#define PRId8 "d" /* int8_t */
+#define PRId16 "d" /* int16_t */
+#define PRId32 "d" /* int32_t */
+#define PRIdPTR "d" /* intptr_t */
+
+#define PRIi8 "i" /* int8_t */
+#define PRIi16 "i" /* int16_t */
+#define PRIi32 "i" /* int32_t */
+#define PRIiPTR "i" /* intptr_t */
+
+#define PRIo8 "o" /* int8_t */
+#define PRIo16 "o" /* int16_t */
+#define PRIo32 "o" /* int32_t */
+#define PRIoPTR "o" /* intptr_t */
+
+#define PRIu8 "u" /* uint8_t */
+#define PRIu16 "u" /* uint16_t */
+#define PRIu32 "u" /* uint32_t */
+#define PRIuPTR "u" /* uintptr_t */
+
+#define PRIx8 "x" /* uint8_t */
+#define PRIx16 "x" /* uint16_t */
+#define PRIx32 "x" /* uint32_t */
+#define PRIxPTR "x" /* uintptr_t */
+
+#define PRIX8 "X" /* uint8_t */
+#define PRIX16 "X" /* uint16_t */
+#define PRIX32 "X" /* uint32_t */
+#define PRIXPTR "X" /* uintptr_t */
+
+#endif
diff --git a/include/lib/libc/stdint.h b/include/lib/libc/stdint.h
index 818870e..e96a25c 100644
--- a/include/lib/libc/stdint.h
+++ b/include/lib/libc/stdint.h
@@ -12,6 +12,7 @@
#define STDINT_H
#include <limits.h>
+#include <stdint_.h>
#define INT8_MAX CHAR_MAX
#define INT8_MIN CHAR_MIN
@@ -25,10 +26,6 @@
#define INT32_MIN INT_MIN
#define UINT32_MAX UINT_MAX
-#define INT64_MAX LLONG_MAX
-#define INT64_MIN LLONG_MIN
-#define UINT64_MAX ULLONG_MAX
-
#define INT_LEAST8_MIN INT8_MIN
#define INT_LEAST8_MAX INT8_MAX
#define UINT_LEAST8_MAX UINT8_MAX
@@ -77,12 +74,10 @@
#define INT8_C(x) x
#define INT16_C(x) x
#define INT32_C(x) x
-#define INT64_C(x) x ## LL
#define UINT8_C(x) x
#define UINT16_C(x) x
#define UINT32_C(x) x ## U
-#define UINT64_C(x) x ## ULL
#define INTMAX_C(x) x ## LL
#define UINTMAX_C(x) x ## ULL
@@ -90,32 +85,26 @@
typedef signed char int8_t;
typedef short int16_t;
typedef int int32_t;
-typedef long long int64_t;
typedef unsigned char uint8_t;
typedef unsigned short uint16_t;
typedef unsigned int uint32_t;
-typedef unsigned long long uint64_t;
typedef signed char int8_least_t;
typedef short int16_least_t;
typedef int int32_least_t;
-typedef long long int64_least_t;
typedef unsigned char uint8_least_t;
typedef unsigned short uint16_least_t;
typedef unsigned int uint32_least_t;
-typedef unsigned long long uint64_least_t;
typedef int int8_fast_t;
typedef int int16_fast_t;
typedef int int32_fast_t;
-typedef long long int64_fast_t;
typedef unsigned int uint8_fast_t;
typedef unsigned int uint16_fast_t;
typedef unsigned int uint32_fast_t;
-typedef unsigned long long uint64_fast_t;
typedef long intptr_t;
typedef unsigned long uintptr_t;
@@ -130,9 +119,4 @@
typedef long register_t;
typedef unsigned long u_register_t;
-#ifdef __aarch64__
-typedef __int128 int128_t;
-typedef unsigned __int128 uint128_t;
-#endif /* __aarch64__ */
-
#endif /* STDINT_H */
diff --git a/lib/bl_aux_params/bl_aux_params.c b/lib/bl_aux_params/bl_aux_params.c
index 7a8115c..7f357b7 100644
--- a/lib/bl_aux_params/bl_aux_params.c
+++ b/lib/bl_aux_params/bl_aux_params.c
@@ -3,6 +3,8 @@
*
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <inttypes.h>
+#include <stdint.h>
#include <common/debug.h>
#include <lib/coreboot.h>
@@ -25,7 +27,7 @@
break;
#endif
default:
- ERROR("Ignoring unknown BL aux parameter: 0x%llx",
+ ERROR("Ignoring unknown BL aux parameter: 0x%" PRIx64,
p->type);
break;
}
diff --git a/lib/cpus/aarch64/cortex_a78.S b/lib/cpus/aarch64/cortex_a78.S
index 4e8a228..a1288ba 100644
--- a/lib/cpus/aarch64/cortex_a78.S
+++ b/lib/cpus/aarch64/cortex_a78.S
@@ -227,6 +227,42 @@
b cpu_rev_var_ls
endfunc check_errata_2132060
+/* --------------------------------------------------------------------
+ * Errata Workaround for A78 Erratum 2242635.
+ * This applies to revisions r1p0, r1p1, and r1p2 of the Cortex A78
+ * processor and is still open.
+ * The issue also exists in r0p0 but there is no fix in that revision.
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0-x17
+ * --------------------------------------------------------------------
+ */
+func errata_a78_2242635_wa
+ /* Compare x0 against revisions r1p0 - r1p2 */
+ mov x17, x30
+ bl check_errata_2242635
+ cbz x0, 1f
+
+ ldr x0, =0x5
+ msr S3_6_c15_c8_0, x0 /* CPUPSELR_EL3 */
+ ldr x0, =0x10F600E000
+ msr S3_6_c15_c8_2, x0 /* CPUPOR_EL3 */
+ ldr x0, =0x10FF80E000
+ msr S3_6_c15_c8_3, x0 /* CPUPMR_EL3 */
+ ldr x0, =0x80000000003FF
+ msr S3_6_c15_c8_1, x0 /* CPUPCR_EL3 */
+
+ isb
+1:
+ ret x17
+endfunc errata_a78_2242635_wa
+
+func check_errata_2242635
+ /* Applies to revisions r1p0 through r1p2. */
+ mov x1, #CPU_REV(1, 0)
+ mov x2, #CPU_REV(1, 2)
+ b cpu_rev_var_range
+endfunc check_errata_2242635
+
/* -------------------------------------------------
* The CPU Ops reset function for Cortex-A78
* -------------------------------------------------
@@ -266,6 +302,11 @@
bl errata_a78_2132060_wa
#endif
+#if ERRATA_A78_2242635
+ mov x0, x18
+ bl errata_a78_2242635_wa
+#endif
+
#if ENABLE_AMU
/* Make sure accesses from EL0/EL1 and EL2 are not trapped to EL3 */
mrs x0, actlr_el3
@@ -326,6 +367,7 @@
report_errata ERRATA_A78_1821534, cortex_a78, 1821534
report_errata ERRATA_A78_1952683, cortex_a78, 1952683
report_errata ERRATA_A78_2132060, cortex_a78, 2132060
+ report_errata ERRATA_A78_2242635, cortex_a78, 2242635
ldp x8, x30, [sp], #16
ret
diff --git a/lib/cpus/aarch64/neoverse_n2.S b/lib/cpus/aarch64/neoverse_n2.S
index 330cc59..621aded 100644
--- a/lib/cpus/aarch64/neoverse_n2.S
+++ b/lib/cpus/aarch64/neoverse_n2.S
@@ -184,6 +184,34 @@
endfunc check_errata_2138956
/* --------------------------------------------------
+ * Errata Workaround for Neoverse N2 Erratum 2242415.
+ * This applies to revision r0p0 of Neoverse N2. it is still open.
+ * Inputs:
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0-x1, x17
+ * --------------------------------------------------
+ */
+func errata_n2_2242415_wa
+ /* Check revision. */
+ mov x17, x30
+ bl check_errata_2242415
+ cbz x0, 1f
+
+ /* Apply instruction patching sequence */
+ mrs x1, NEOVERSE_N2_CPUACTLR_EL1
+ orr x1, x1, NEOVERSE_N2_CPUACTLR_EL1_BIT_22
+ msr NEOVERSE_N2_CPUACTLR_EL1, x1
+1:
+ ret x17
+endfunc errata_n2_2242415_wa
+
+func check_errata_2242415
+ /* Applies to r0p0 */
+ mov x1, #0x00
+ b cpu_rev_var_ls
+endfunc check_errata_2242415
+
+/* --------------------------------------------------
* Errata Workaround for Neoverse N2 Erratum 2138953.
* This applies to revision r0p0 of Neoverse N2. it is still open.
* Inputs:
@@ -212,6 +240,99 @@
b cpu_rev_var_ls
endfunc check_errata_2138953
+/* --------------------------------------------------
+ * Errata Workaround for Neoverse N2 Erratum 2138958.
+ * This applies to revision r0p0 of Neoverse N2. it is still open.
+ * Inputs:
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0-x1, x17
+ * --------------------------------------------------
+ */
+func errata_n2_2138958_wa
+ /* Check revision. */
+ mov x17, x30
+ bl check_errata_2138958
+ cbz x0, 1f
+
+ /* Apply instruction patching sequence */
+ mrs x1, NEOVERSE_N2_CPUACTLR5_EL1
+ orr x1, x1, NEOVERSE_N2_CPUACTLR5_EL1_BIT_13
+ msr NEOVERSE_N2_CPUACTLR5_EL1, x1
+1:
+ ret x17
+endfunc errata_n2_2138958_wa
+
+func check_errata_2138958
+ /* Applies to r0p0 */
+ mov x1, #0x00
+ b cpu_rev_var_ls
+endfunc check_errata_2138958
+
+/* --------------------------------------------------
+ * Errata Workaround for Neoverse N2 Erratum 2242400.
+ * This applies to revision r0p0 of Neoverse N2. it is still open.
+ * Inputs:
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0-x1, x17
+ * --------------------------------------------------
+ */
+func errata_n2_2242400_wa
+ /* Check revision. */
+ mov x17, x30
+ bl check_errata_2242400
+ cbz x0, 1f
+
+ /* Apply instruction patching sequence */
+ mrs x1, NEOVERSE_N2_CPUACTLR5_EL1
+ orr x1, x1, NEOVERSE_N2_CPUACTLR5_EL1_BIT_17
+ msr NEOVERSE_N2_CPUACTLR5_EL1, x1
+ ldr x0, =0x2
+ msr S3_6_c15_c8_0, x0
+ ldr x0, =0x10F600E000
+ msr S3_6_c15_c8_2, x0
+ ldr x0, =0x10FF80E000
+ msr S3_6_c15_c8_3, x0
+ ldr x0, =0x80000000003FF
+ msr S3_6_c15_c8_1, x0
+ isb
+1:
+ ret x17
+endfunc errata_n2_2242400_wa
+
+func check_errata_2242400
+ /* Applies to r0p0 */
+ mov x1, #0x00
+ b cpu_rev_var_ls
+endfunc check_errata_2242400
+
+/* --------------------------------------------------
+ * Errata Workaround for Neoverse N2 Erratum 2280757.
+ * This applies to revision r0p0 of Neoverse N2. it is still open.
+ * Inputs:
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0-x1, x17
+ * --------------------------------------------------
+ */
+func errata_n2_2280757_wa
+ /* Check revision. */
+ mov x17, x30
+ bl check_errata_2280757
+ cbz x0, 1f
+
+ /* Apply instruction patching sequence */
+ mrs x1, NEOVERSE_N2_CPUACTLR_EL1
+ orr x1, x1, NEOVERSE_N2_CPUACTLR_EL1_BIT_22
+ msr NEOVERSE_N2_CPUACTLR_EL1, x1
+1:
+ ret x17
+endfunc errata_n2_2280757_wa
+
+func check_errata_2280757
+ /* Applies to r0p0 */
+ mov x1, #0x00
+ b cpu_rev_var_ls
+endfunc check_errata_2280757
+
/* -------------------------------------------
* The CPU Ops reset function for Neoverse N2.
* -------------------------------------------
@@ -238,13 +359,13 @@
#endif
#if ERRATA_N2_2025414
- mov x0, x18
- bl errata_n2_2025414_wa
+ mov x0, x18
+ bl errata_n2_2025414_wa
#endif
#if ERRATA_N2_2189731
- mov x0, x18
- bl errata_n2_2189731_wa
+ mov x0, x18
+ bl errata_n2_2189731_wa
#endif
@@ -258,6 +379,26 @@
bl errata_n2_2138953_wa
#endif
+#if ERRATA_N2_2242415
+ mov x0, x18
+ bl errata_n2_2242415_wa
+#endif
+
+#if ERRATA_N2_2138958
+ mov x0, x18
+ bl errata_n2_2138958_wa
+#endif
+
+#if ERRATA_N2_2242400
+ mov x0, x18
+ bl errata_n2_2242400_wa
+#endif
+
+#if ERRATA_N2_2280757
+ mov x0, x18
+ bl errata_n2_2280757_wa
+#endif
+
#if ENABLE_AMU
/* Make sure accesses from EL0/EL1 and EL2 are not trapped to EL3 */
mrs x0, cptr_el3
@@ -324,6 +465,10 @@
report_errata ERRATA_N2_2189731, neoverse_n2, 2189731
report_errata ERRATA_N2_2138956, neoverse_n2, 2138956
report_errata ERRATA_N2_2138953, neoverse_n2, 2138953
+ report_errata ERRATA_N2_2242415, neoverse_n2, 2242415
+ report_errata ERRATA_N2_2138958, neoverse_n2, 2138958
+ report_errata ERRATA_N2_2242400, neoverse_n2, 2242400
+ report_errata ERRATA_N2_2280757, neoverse_n2, 2280757
ldp x8, x30, [sp], #16
ret
diff --git a/lib/cpus/aarch64/neoverse_v1.S b/lib/cpus/aarch64/neoverse_v1.S
index 200f67d..62a7a30 100644
--- a/lib/cpus/aarch64/neoverse_v1.S
+++ b/lib/cpus/aarch64/neoverse_v1.S
@@ -288,6 +288,43 @@
b cpu_rev_var_ls
endfunc check_errata_2108267
+ /* --------------------------------------------------
+ * Errata Workaround for Neoverse V1 Errata #2216392.
+ * This applies to revisions r1p0 and r1p1 and is
+ * still open.
+ * This issue is also present in r0p0 but there is no
+ * workaround in that revision.
+ * x0: variant[4:7] and revision[0:3] of current cpu.
+ * Shall clobber: x0-x17
+ * --------------------------------------------------
+ */
+func errata_neoverse_v1_2216392_wa
+ /* Check workaround compatibility. */
+ mov x17, x30
+ bl check_errata_2216392
+ cbz x0, 1f
+
+ ldr x0, =0x5
+ msr S3_6_c15_c8_0, x0 /* CPUPSELR_EL3 */
+ ldr x0, =0x10F600E000
+ msr S3_6_c15_c8_2, x0 /* CPUPOR_EL3 */
+ ldr x0, =0x10FF80E000
+ msr S3_6_c15_c8_3, x0 /* CPUPMR_EL3 */
+ ldr x0, =0x80000000003FF
+ msr S3_6_c15_c8_1, x0 /* CPUPCR_EL3 */
+
+ isb
+1:
+ ret x17
+endfunc errata_neoverse_v1_2216392_wa
+
+func check_errata_2216392
+ /* Applies to revisions r1p0 and r1p1. */
+ mov x1, #CPU_REV(1, 0)
+ mov x2, #CPU_REV(1, 1)
+ b cpu_rev_var_range
+endfunc check_errata_2216392
+
/* ---------------------------------------------
* HW will do the cache maintenance while powering down
* ---------------------------------------------
@@ -326,6 +363,7 @@
report_errata ERRATA_V1_1966096, neoverse_v1, 1966096
report_errata ERRATA_V1_2139242, neoverse_v1, 2139242
report_errata ERRATA_V1_2108267, neoverse_v1, 2108267
+ report_errata ERRATA_V1_2216392, neoverse_v1, 2216392
ldp x8, x30, [sp], #16
ret
@@ -379,6 +417,11 @@
bl errata_neoverse_v1_2108267_wa
#endif
+#if ERRATA_V1_2216392
+ mov x0, x18
+ bl errata_neoverse_v1_2216392_wa
+#endif
+
ret x19
endfunc neoverse_v1_reset_func
diff --git a/lib/cpus/cpu-ops.mk b/lib/cpus/cpu-ops.mk
index 138f7a5..a5b8aae 100644
--- a/lib/cpus/cpu-ops.mk
+++ b/lib/cpus/cpu-ops.mk
@@ -311,6 +311,23 @@
# well but there is no workaround for that revision.
ERRATA_A78_1951500 ?=0
+# Flag to apply erratum 1821534 workaround during reset. This erratum applies
+# to revisions r0p0 and r1p0 of the A78 cpu.
+ERRATA_A78_1821534 ?=0
+
+# Flag to apply erratum 1952683 workaround during reset. This erratum applies
+# to revision r0p0 of the A78 cpu and was fixed in the revision r1p0.
+ERRATA_A78_1952683 ?=0
+
+# Flag to apply erratum 2132060 workaround during reset. This erratum applies
+# to revisions r0p0, r1p0, r1p1, and r1p2 of the A78 cpu. It is still open.
+ERRATA_A78_2132060 ?=0
+
+# Flag to apply erratum 2242635 workaround during reset. This erratum applies
+# to revisions r1p0, r1p1, and r1p2 of the A78 cpu and is open. The issue is
+# present in r0p0 as well but there is no workaround for that revision.
+ERRATA_A78_2242635 ?=0
+
# Flag to apply erratum 1941500 workaround during reset. This erratum applies
# to revisions r0p0 and r0p1 of the A78 AE cpu. It is still open.
ERRATA_A78_AE_1941500 ?=0
@@ -319,18 +336,6 @@
# to revisions r0p0 and r0p1 of the A78 AE cpu. It is still open.
ERRATA_A78_AE_1951502 ?=0
-# Flag to apply erratum 1821534 workaround during reset. This erratum applies
-# to revisions r0p0 and r1p0 of the A78 cpu.
-ERRATA_A78_1821534 ?=0
-
-# Flag to apply erratum 1952683 workaround during reset. This erratum applies
-# to revision r0p0 of the A78 cpu and was fixed in the revision r1p0.
-ERRATA_A78_1952683 ?=0
-
-# Flag to apply erratum 2132060 workaround during reset. This erratum applies
-# to revisions r0p0, r1p0, r1p1, and r1p2 of the A78 cpu. It is still open.
-ERRATA_A78_2132060 ?=0
-
# Flag to apply T32 CLREX workaround during reset. This erratum applies
# only to r0p0 and r1p0 of the Neoverse N1 cpu.
ERRATA_N1_1043202 ?=0
@@ -425,6 +430,11 @@
# to revisions r0p0, r1p0, and r1p1 of the Neoverse V1 cpu and is still open.
ERRATA_V1_2108267 ?=0
+# Flag to apply erratum 2216392 workaround during reset. This erratum applies
+# to revisions r1p0 and r1p1 of the Neoverse V1 cpu and is still open. This
+# issue exists in r0p0 as well but there is no workaround for that revision.
+ERRATA_V1_2216392 ?=0
+
# Flag to apply erratum 1987031 workaround during reset. This erratum applies
# to revisions r0p0, r1p0 and r2p0 of the Cortex-A710 cpu and is still open.
ERRATA_A710_1987031 ?=0
@@ -461,6 +471,22 @@
# to revision r0p0 of the Neoverse N2 cpu and is still open.
ERRATA_N2_2138953 ?=0
+# Flag to apply erratum 2242415 workaround during reset. This erratum applies
+# to revision r0p0 of the Neoverse N2 cpu and is still open.
+ERRATA_N2_2242415 ?=0
+
+# Flag to apply erratum 2138958 workaround during reset. This erratum applies
+# to revision r0p0 of the Neoverse N2 cpu and is still open.
+ERRATA_N2_2138958 ?=0
+
+# Flag to apply erratum 2242400 workaround during reset. This erratum applies
+# to revision r0p0 of the Neoverse N2 cpu and is still open.
+ERRATA_N2_2242400 ?=0
+
+# Flag to apply erratum 2280757 workaround during reset. This erratum applies
+# to revision r0p0 of the Neoverse N2 cpu and is still open.
+ERRATA_N2_2280757 ?=0
+
# Flag to apply erratum 2055002 workaround during reset. This erratum applies
# to revision r1p0, r2p0 of the Cortex-A710 cpu and is still open.
ERRATA_A710_2055002 ?=0
@@ -714,14 +740,6 @@
$(eval $(call assert_boolean,ERRATA_A78_1951500))
$(eval $(call add_define,ERRATA_A78_1951500))
-# Process ERRATA_A78_AE_1941500 flag
-$(eval $(call assert_boolean,ERRATA_A78_AE_1941500))
-$(eval $(call add_define,ERRATA_A78_AE_1941500))
-
-# Process ERRATA_A78_AE_1951502 flag
-$(eval $(call assert_boolean,ERRATA_A78_AE_1951502))
-$(eval $(call add_define,ERRATA_A78_AE_1951502))
-
# Process ERRATA_A78_1821534 flag
$(eval $(call assert_boolean,ERRATA_A78_1821534))
$(eval $(call add_define,ERRATA_A78_1821534))
@@ -734,6 +752,18 @@
$(eval $(call assert_boolean,ERRATA_A78_2132060))
$(eval $(call add_define,ERRATA_A78_2132060))
+# Process ERRATA_A78_2242635 flag
+$(eval $(call assert_boolean,ERRATA_A78_2242635))
+$(eval $(call add_define,ERRATA_A78_2242635))
+
+# Process ERRATA_A78_AE_1941500 flag
+$(eval $(call assert_boolean,ERRATA_A78_AE_1941500))
+$(eval $(call add_define,ERRATA_A78_AE_1941500))
+
+# Process ERRATA_A78_AE_1951502 flag
+$(eval $(call assert_boolean,ERRATA_A78_AE_1951502))
+$(eval $(call add_define,ERRATA_A78_AE_1951502))
+
# Process ERRATA_N1_1043202 flag
$(eval $(call assert_boolean,ERRATA_N1_1043202))
$(eval $(call add_define,ERRATA_N1_1043202))
@@ -826,6 +856,10 @@
$(eval $(call assert_boolean,ERRATA_V1_2108267))
$(eval $(call add_define,ERRATA_V1_2108267))
+# Process ERRATA_V1_2216392 flag
+$(eval $(call assert_boolean,ERRATA_V1_2216392))
+$(eval $(call add_define,ERRATA_V1_2216392))
+
# Process ERRATA_A710_1987031 flag
$(eval $(call assert_boolean,ERRATA_A710_1987031))
$(eval $(call add_define,ERRATA_A710_1987031))
@@ -862,6 +896,22 @@
$(eval $(call assert_boolean,ERRATA_N2_2138953))
$(eval $(call add_define,ERRATA_N2_2138953))
+# Process ERRATA_N2_2242415 flag
+$(eval $(call assert_boolean,ERRATA_N2_2242415))
+$(eval $(call add_define,ERRATA_N2_2242415))
+
+# Process ERRATA_N2_2138958 flag
+$(eval $(call assert_boolean,ERRATA_N2_2138958))
+$(eval $(call add_define,ERRATA_N2_2138958))
+
+# Process ERRATA_N2_2242400 flag
+$(eval $(call assert_boolean,ERRATA_N2_2242400))
+$(eval $(call add_define,ERRATA_N2_2242400))
+
+# Process ERRATA_N2_2280757 flag
+$(eval $(call assert_boolean,ERRATA_N2_2280757))
+$(eval $(call add_define,ERRATA_N2_2280757))
+
# Process ERRATA_A710_2055002 flag
$(eval $(call assert_boolean,ERRATA_A710_2055002))
$(eval $(call add_define,ERRATA_A710_2055002))
diff --git a/lib/extensions/amu/aarch64/amu.c b/lib/extensions/amu/aarch64/amu.c
index 35efd21..d329c3d 100644
--- a/lib/extensions/amu/aarch64/amu.c
+++ b/lib/extensions/amu/aarch64/amu.c
@@ -6,7 +6,9 @@
#include <assert.h>
#include <cdefs.h>
+#include <inttypes.h>
#include <stdbool.h>
+#include <stdint.h>
#include "../amu_private.h"
#include <arch.h>
@@ -343,7 +345,7 @@
default:
ERROR("AMU: can't set up virtual offset for unknown "
- "architected counter %llu!\n", idx);
+ "architected counter %" PRIu64 "!\n", idx);
panic();
}
diff --git a/lib/gpt_rme/gpt_rme.c b/lib/gpt_rme/gpt_rme.c
index 1f90e64..6d1ff4d 100644
--- a/lib/gpt_rme/gpt_rme.c
+++ b/lib/gpt_rme/gpt_rme.c
@@ -708,8 +708,12 @@
/* GPCCR_EL3.PGS */
gpccr_el3 |= SET_GPCCR_PGS(gpt_config.pgs);
- /* Set shareability attribute to Outher Shareable */
- gpccr_el3 |= SET_GPCCR_SH(GPCCR_SH_OS);
+ /*
+ * Since EL3 maps the L1 region as Inner shareable, use the same
+ * shareability attribute for GPC as well so that
+ * GPC fetches are visible to PEs
+ */
+ gpccr_el3 |= SET_GPCCR_SH(GPCCR_SH_IS);
/* Outer and Inner cacheability set to Normal memory, WB, RA, WA. */
gpccr_el3 |= SET_GPCCR_ORGN(GPCCR_ORGN_WB_RA_WA);
@@ -720,6 +724,7 @@
/* TODO: Configure GPCCR_EL3_GPCP for Fault control. */
write_gpccr_el3(gpccr_el3);
+ isb();
tlbipaallos();
dsb();
isb();
@@ -759,7 +764,7 @@
int ret;
uint64_t gpt_desc;
- /* Ensure that MMU and caches are enabled. */
+ /* Ensure that MMU and Data caches are enabled. */
assert((read_sctlr_el3() & SCTLR_C_BIT) != 0U);
/* Validate other parameters. */
@@ -814,7 +819,7 @@
int ret;
int l1_gpt_cnt;
- /* Ensure that MMU and caches are enabled. */
+ /* Ensure that MMU and Data caches are enabled. */
assert((read_sctlr_el3() & SCTLR_C_BIT) != 0U);
/* PGS is needed for gpt_validate_pas_mappings so check it now. */
@@ -888,6 +893,9 @@
/* Make sure that all the entries are written to the memory. */
dsbishst();
+ tlbipaallos();
+ dsb();
+ isb();
return 0;
}
@@ -907,7 +915,7 @@
{
u_register_t reg;
- /* Ensure that MMU and caches are enabled. */
+ /* Ensure that MMU and Data caches are enabled. */
assert((read_sctlr_el3() & SCTLR_C_BIT) != 0U);
/* Ensure GPC are already enabled. */
@@ -1028,6 +1036,9 @@
/* Ensure that the tables have been set up before taking requests. */
assert(gpt_config.plat_gpt_l0_base != 0U);
+ /* Ensure that MMU and data caches are enabled. */
+ assert((read_sctlr_el3() & SCTLR_C_BIT) != 0U);
+
/* Check for address range overflow. */
if ((ULONG_MAX - base) < size) {
VERBOSE("[GPT] Transition request address overflow!\n");
@@ -1093,18 +1104,18 @@
gpt_l1_desc |= ((uint64_t)target_pas << gpi_shift);
gpt_l1_addr[idx] = gpt_l1_desc;
- /* Ensure that the write operation happens before the unlock. */
- dmbishst();
+ /* Ensure that the write operation will be observed by GPC */
+ dsbishst();
/* Unlock access to the L1 tables. */
spin_unlock(&gpt_lock);
- /* Cache maintenance. */
- clean_dcache_range((uintptr_t)&gpt_l1_addr[idx],
- sizeof(uint64_t));
gpt_tlbi_by_pa(base, GPT_PGS_ACTUAL_SIZE(gpt_config.p));
dsbishst();
-
+ /*
+ * The isb() will be done as part of context
+ * synchronization when returning to lower EL
+ */
VERBOSE("[GPT] Granule 0x%llx, GPI 0x%x->0x%x\n", base, gpi,
target_pas);
diff --git a/plat/arm/board/arm_fpga/build_axf.ld.S b/plat/arm/board/arm_fpga/build_axf.ld.S
index b4bc7d8..d8254e5 100644
--- a/plat/arm/board/arm_fpga/build_axf.ld.S
+++ b/plat/arm/board/arm_fpga/build_axf.ld.S
@@ -15,11 +15,11 @@
OUTPUT_FORMAT("elf64-littleaarch64")
OUTPUT_ARCH(aarch64)
-INPUT(./bl31/bl31.elf)
INPUT(./rom_trampoline.o)
INPUT(./kernel_trampoline.o)
TARGET(binary)
+INPUT(./bl31.bin)
INPUT(./fdts/arm_fpga.dtb)
ENTRY(_start)
@@ -33,7 +33,7 @@
.bl31 (BL31_BASE): {
ASSERT(. == ALIGN(PAGE_SIZE), "BL31_BASE is not page aligned");
- *bl31.elf(.text* .data* .rodata* ro* .bss*)
+ *bl31.bin
}
.dtb (FPGA_PRELOADED_DTB_BASE): {
diff --git a/plat/arm/board/arm_fpga/fpga_bl31_setup.c b/plat/arm/board/arm_fpga/fpga_bl31_setup.c
index 2b5ca4a..e1b3abb 100644
--- a/plat/arm/board/arm_fpga/fpga_bl31_setup.c
+++ b/plat/arm/board/arm_fpga/fpga_bl31_setup.c
@@ -13,6 +13,7 @@
#include <drivers/delay_timer.h>
#include <drivers/generic_delay_timer.h>
#include <lib/extensions/spe.h>
+#include <lib/mmio.h>
#include <libfdt.h>
#include "fpga_private.h"
@@ -20,6 +21,7 @@
#include <platform_def.h>
static entry_point_info_t bl33_image_ep_info;
+static unsigned int system_freq;
volatile uint32_t secondary_core_spinlock;
uintptr_t plat_get_ns_image_entrypoint(void)
@@ -118,18 +120,187 @@
}
}
-unsigned int plat_get_syscnt_freq2(void)
-{
- const void *fdt = (void *)(uintptr_t)FPGA_PRELOADED_DTB_BASE;
- int node;
+/*
+ * Even though we sell the FPGA UART as an SBSA variant, it is actually
+ * a full fledged PL011. So the baudrate divider registers exist.
+ */
+#ifndef UARTIBRD
+#define UARTIBRD 0x024
+#define UARTFBRD 0x028
+#endif
- node = fdt_node_offset_by_compatible(fdt, 0, "arm,armv8-timer");
- if (node < 0) {
- return FPGA_DEFAULT_TIMER_FREQUENCY;
+/* Round an integer to the closest multiple of a value. */
+static unsigned int round_multiple(unsigned int x, unsigned int multiple)
+{
+ if (multiple < 2) {
+ return x;
}
- return fdt_read_uint32_default(fdt, node, "clock-frequency",
- FPGA_DEFAULT_TIMER_FREQUENCY);
+ return ((x + (multiple / 2 - 1)) / multiple) * multiple;
+}
+
+#define PL011_FRAC_SHIFT 6
+#define FPGA_DEFAULT_BAUDRATE 38400
+#define PL011_OVERSAMPLING 16
+static unsigned int pl011_freq_from_divider(unsigned int divider)
+{
+ unsigned int freq;
+
+ freq = divider * FPGA_DEFAULT_BAUDRATE * PL011_OVERSAMPLING;
+
+ return freq >> PL011_FRAC_SHIFT;
+}
+
+/*
+ * The FPGAs run most peripherals from one main clock, among them the CPUs,
+ * the arch timer, and the UART baud base clock.
+ * The SCP knows this frequency and programs the UART clock divider for a
+ * 38400 bps baudrate. Recalculate the base input clock from there.
+ */
+static unsigned int fpga_get_system_frequency(void)
+{
+ const void *fdt = (void *)(uintptr_t)FPGA_PRELOADED_DTB_BASE;
+ int node, err;
+
+ /*
+ * If the arch timer DT node has an explicit clock-frequency property
+ * set, use that, to allow people overriding auto-detection.
+ */
+ node = fdt_node_offset_by_compatible(fdt, 0, "arm,armv8-timer");
+ if (node >= 0) {
+ uint32_t freq;
+
+ err = fdt_read_uint32(fdt, node, "clock-frequency", &freq);
+ if (err >= 0) {
+ return freq;
+ }
+ }
+
+ node = fdt_node_offset_by_compatible(fdt, 0, "arm,pl011");
+ if (node >= 0) {
+ uintptr_t pl011_base;
+ unsigned int divider;
+
+ err = fdt_get_reg_props_by_index(fdt, node, 0,
+ &pl011_base, NULL);
+ if (err >= 0) {
+ divider = mmio_read_32(pl011_base + UARTIBRD);
+ divider <<= PL011_FRAC_SHIFT;
+ divider += mmio_read_32(pl011_base + UARTFBRD);
+
+ /*
+ * The result won't be exact, due to rounding errors,
+ * but the input frequency was a multiple of 250 KHz.
+ */
+ return round_multiple(pl011_freq_from_divider(divider),
+ 250000);
+ } else {
+ WARN("Cannot read PL011 MMIO base\n");
+ }
+ } else {
+ WARN("No PL011 DT node\n");
+ }
+
+ /* No PL011 DT node or calculation failed. */
+ return FPGA_DEFAULT_TIMER_FREQUENCY;
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+ if (system_freq == 0U) {
+ system_freq = fpga_get_system_frequency();
+ }
+
+ return system_freq;
+}
+
+static void fpga_dtb_update_clock(void *fdt, unsigned int freq)
+{
+ uint32_t freq_dtb = fdt32_to_cpu(freq);
+ uint32_t phandle;
+ int node, err;
+
+ node = fdt_node_offset_by_compatible(fdt, 0, "arm,pl011");
+ if (node < 0) {
+ WARN("%s(): No PL011 DT node found\n", __func__);
+
+ return;
+ }
+
+ err = fdt_read_uint32(fdt, node, "clocks", &phandle);
+ if (err != 0) {
+ WARN("Cannot find clocks property\n");
+
+ return;
+ }
+
+ node = fdt_node_offset_by_phandle(fdt, phandle);
+ if (node < 0) {
+ WARN("Cannot get phandle\n");
+
+ return;
+ }
+
+ err = fdt_setprop_inplace(fdt, node,
+ "clock-frequency",
+ &freq_dtb,
+ sizeof(freq_dtb));
+ if (err < 0) {
+ WARN("Could not update DT baud clock frequency\n");
+
+ return;
+ }
+}
+
+#define CMDLINE_SIGNATURE "CMD:"
+
+static int fpga_dtb_set_commandline(void *fdt, const char *cmdline)
+{
+ int chosen;
+ const char *eol;
+ char nul = 0;
+ int slen, err;
+
+ chosen = fdt_add_subnode(fdt, 0, "chosen");
+ if (chosen == -FDT_ERR_EXISTS) {
+ chosen = fdt_path_offset(fdt, "/chosen");
+ }
+
+ if (chosen < 0) {
+ return chosen;
+ }
+
+ /*
+ * There is most likely an EOL at the end of the
+ * command line, make sure we terminate the line there.
+ * We can't replace the EOL with a NUL byte in the
+ * source, as this is in read-only memory. So we first
+ * create the property without any termination, then
+ * append a single NUL byte.
+ */
+ eol = strchr(cmdline, '\n');
+ if (eol == NULL) {
+ eol = strchr(cmdline, 0);
+ }
+ /* Skip the signature and omit the EOL/NUL byte. */
+ slen = eol - (cmdline + strlen(CMDLINE_SIGNATURE));
+ /*
+ * Let's limit the size of the property, just in case
+ * we find the signature by accident. The Linux kernel
+ * limits to 4096 characters at most (in fact 2048 for
+ * arm64), so that sounds like a reasonable number.
+ */
+ if (slen > 4095) {
+ slen = 4095;
+ }
+
+ err = fdt_setprop(fdt, chosen, "bootargs",
+ cmdline + strlen(CMDLINE_SIGNATURE), slen);
+ if (err != 0) {
+ return err;
+ }
+
+ return fdt_appendprop(fdt, chosen, "bootargs", &nul, 1);
}
static void fpga_prepare_dtb(void)
@@ -151,55 +322,13 @@
}
/* Check for the command line signature. */
- if (!strncmp(cmdline, "CMD:", 4)) {
- int chosen;
-
- INFO("using command line at 0x%x\n", FPGA_PRELOADED_CMD_LINE);
-
- chosen = fdt_add_subnode(fdt, 0, "chosen");
- if (chosen == -FDT_ERR_EXISTS) {
- chosen = fdt_path_offset(fdt, "/chosen");
- }
- if (chosen < 0) {
- ERROR("cannot find /chosen node: %d\n", chosen);
+ if (!strncmp(cmdline, CMDLINE_SIGNATURE, strlen(CMDLINE_SIGNATURE))) {
+ err = fpga_dtb_set_commandline(fdt, cmdline);
+ if (err == 0) {
+ INFO("using command line at 0x%x\n",
+ FPGA_PRELOADED_CMD_LINE);
} else {
- const char *eol;
- char nul = 0;
- int slen;
-
- /*
- * There is most likely an EOL at the end of the
- * command line, make sure we terminate the line there.
- * We can't replace the EOL with a NUL byte in the
- * source, as this is in read-only memory. So we first
- * create the property without any termination, then
- * append a single NUL byte.
- */
- eol = strchr(cmdline, '\n');
- if (!eol) {
- eol = strchr(cmdline, 0);
- }
- /* Skip the signature and omit the EOL/NUL byte. */
- slen = eol - (cmdline + 4);
-
- /*
- * Let's limit the size of the property, just in case
- * we find the signature by accident. The Linux kernel
- * limits to 4096 characters at most (in fact 2048 for
- * arm64), so that sounds like a reasonable number.
- */
- if (slen > 4095) {
- slen = 4095;
- }
- err = fdt_setprop(fdt, chosen, "bootargs",
- cmdline + 4, slen);
- if (!err) {
- err = fdt_appendprop(fdt, chosen, "bootargs",
- &nul, 1);
- }
- if (err) {
- ERROR("Could not set command line: %d\n", err);
- }
+ ERROR("failed to put command line into DTB: %d\n", err);
}
}
@@ -224,6 +353,7 @@
INFO("Adjusting GICR DT region to cover %u cores\n",
nr_cores);
err = fdt_adjust_gic_redist(fdt, nr_cores,
+ fpga_get_redist_base(),
fpga_get_redist_size());
if (err < 0) {
ERROR("Error %d fixing up GIC DT node\n", err);
@@ -231,6 +361,8 @@
}
}
+ fpga_dtb_update_clock(fdt, system_freq);
+
/* Check whether we support the SPE PMU. Remove the DT node if not. */
if (!spe_supported()) {
int node = fdt_node_offset_by_compatible(fdt, 0,
@@ -241,6 +373,16 @@
}
}
+ /* Check whether we have an ITS. Remove the DT node if not. */
+ if (!fpga_has_its()) {
+ int node = fdt_node_offset_by_compatible(fdt, 0,
+ "arm,gic-v3-its");
+
+ if (node >= 0) {
+ fdt_del_node(fdt, node);
+ }
+ }
+
err = fdt_pack(fdt);
if (err < 0) {
ERROR("Failed to pack Device Tree at %p: error %d\n", fdt, err);
diff --git a/plat/arm/board/arm_fpga/fpga_gicv3.c b/plat/arm/board/arm_fpga/fpga_gicv3.c
index 4a97beb..e06a9da 100644
--- a/plat/arm/board/arm_fpga/fpga_gicv3.c
+++ b/plat/arm/board/arm_fpga/fpga_gicv3.c
@@ -1,13 +1,14 @@
/*
- * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2020-2021, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <common/debug.h>
#include <common/fdt_wrappers.h>
-#include <drivers/arm/gicv3.h>
+#include <drivers/arm/arm_gicv3_common.h>
#include <drivers/arm/gic_common.h>
+#include <drivers/arm/gicv3.h>
#include <lib/mmio.h>
#include <libfdt.h>
@@ -21,6 +22,7 @@
};
static uintptr_t fpga_rdistif_base_addrs[PLATFORM_CORE_COUNT];
+static int nr_itses;
static unsigned int fpga_mpidr_to_core_pos(unsigned long mpidr)
{
@@ -38,6 +40,8 @@
void plat_fpga_gic_init(void)
{
const void *fdt = (void *)(uintptr_t)FPGA_PRELOADED_DTB_BASE;
+ uintptr_t gicr_base = 0U;
+ uint32_t iidr;
int node, ret;
node = fdt_node_offset_by_compatible(fdt, 0, "arm,gic-v3");
@@ -54,11 +58,66 @@
return;
}
- ret = fdt_get_reg_props_by_index(fdt, node, 1,
- &fpga_gicv3_driver_data.gicr_base, NULL);
- if (ret < 0) {
- WARN("Could not read GIC redistributor address from DT.\n");
- return;
+ iidr = mmio_read_32(fpga_gicv3_driver_data.gicd_base + GICD_IIDR);
+ if (((iidr & IIDR_MODEL_MASK) == IIDR_MODEL_ARM_GIC_600) ||
+ ((iidr & IIDR_MODEL_MASK) == IIDR_MODEL_ARM_GIC_700)) {
+ unsigned int frame_id;
+
+ /*
+ * According to the GIC TRMs, if there are any ITSes, they
+ * start four 64K pages after the distributor. After all
+ * the ITSes then follow the redistributors.
+ */
+ gicr_base = fpga_gicv3_driver_data.gicd_base + (4U << 16);
+
+ do {
+ uint64_t its_typer;
+
+ /* Each GIC component can be identified by its ID. */
+ frame_id = gicv3_get_component_partnum(gicr_base);
+
+ if (frame_id == PIDR_COMPONENT_ARM_REDIST) {
+ INFO("Found %d ITSes, redistributors start at 0x%llx\n",
+ nr_itses, (unsigned long long)gicr_base);
+ break;
+ }
+
+ if (frame_id != PIDR_COMPONENT_ARM_ITS) {
+ WARN("GICv3: found unexpected frame 0x%x\n",
+ frame_id);
+ gicr_base = 0U;
+ break;
+ }
+
+ /*
+ * Found an ITS, now work out if it supports virtual
+ * SGIs (for direct guest injection). If yes, each
+ * ITS occupies four 64K pages, otherwise just two.
+ */
+ its_typer = mmio_read_64(gicr_base + GITS_TYPER);
+ if ((its_typer & GITS_TYPER_VSGI) != 0U) {
+ gicr_base += 4U << 16;
+ } else {
+ gicr_base += 2U << 16;
+ }
+ nr_itses++;
+ } while (true);
+ }
+
+ /*
+ * If this is not a GIC-600 or -700, or the autodetection above failed,
+ * use the base address from the device tree.
+ */
+ if (gicr_base == 0U) {
+ ret = fdt_get_reg_props_by_index(fdt, node, 1,
+ &fpga_gicv3_driver_data.gicr_base,
+ NULL);
+ if (ret < 0) {
+ WARN("Could not read GIC redistributor address from DT.\n");
+ return;
+ }
+ } else {
+ fpga_gicv3_driver_data.gicr_base = gicr_base;
}
gicv3_driver_init(&fpga_gicv3_driver_data);
@@ -91,3 +150,13 @@
return gicv3_redist_size(typer_val);
}
+
+uintptr_t fpga_get_redist_base(void)
+{
+ return fpga_gicv3_driver_data.gicr_base;
+}
+
+bool fpga_has_its(void)
+{
+ return nr_itses > 0;
+}
diff --git a/plat/arm/board/arm_fpga/fpga_private.h b/plat/arm/board/arm_fpga/fpga_private.h
index cc809c4..84d651c 100644
--- a/plat/arm/board/arm_fpga/fpga_private.h
+++ b/plat/arm/board/arm_fpga/fpga_private.h
@@ -26,6 +26,8 @@
unsigned int plat_fpga_calc_core_pos(uint32_t mpid);
unsigned int fpga_get_nr_gic_cores(void);
uintptr_t fpga_get_redist_size(void);
+uintptr_t fpga_get_redist_base(void);
+bool fpga_has_its(void);
#endif /* __ASSEMBLER__ */
diff --git a/plat/arm/board/fvp/fconf/fconf_hw_config_getter.c b/plat/arm/board/fvp/fconf/fconf_hw_config_getter.c
index 35a777b..45e3b7e 100644
--- a/plat/arm/board/fvp/fconf/fconf_hw_config_getter.c
+++ b/plat/arm/board/fvp/fconf/fconf_hw_config_getter.c
@@ -5,6 +5,9 @@
*/
#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
+
#include <common/debug.h>
#include <common/fdt_wrappers.h>
#include <fconf_hw_config_getter.h>
@@ -229,7 +232,7 @@
uart_serial_config.uart_base = translated_addr;
- VERBOSE("FCONF: UART serial device base address: %llx\n",
+ VERBOSE("FCONF: UART serial device base address: %" PRIx64 "\n",
uart_serial_config.uart_base);
/*
diff --git a/plat/arm/board/tc/fdts/tc_spmc_manifest.dts b/plat/arm/board/tc/fdts/tc_spmc_manifest.dts
index a8592f6..d3a5e1a 100644
--- a/plat/arm/board/tc/fdts/tc_spmc_manifest.dts
+++ b/plat/arm/board/tc/fdts/tc_spmc_manifest.dts
@@ -43,6 +43,13 @@
vcpu_count = <1>;
mem_size = <1048576>;
};
+ vm4 {
+ is_ffa_partition;
+ debug_name = "ivy";
+ load_address = <0xfe600000>;
+ vcpu_count = <1>;
+ mem_size = <1048576>;
+ };
};
cpus {
diff --git a/plat/arm/board/tc/fdts/tc_tb_fw_config.dts b/plat/arm/board/tc/fdts/tc_tb_fw_config.dts
index af80550..4c6ccef 100644
--- a/plat/arm/board/tc/fdts/tc_tb_fw_config.dts
+++ b/plat/arm/board/tc/fdts/tc_tb_fw_config.dts
@@ -64,6 +64,12 @@
uuid = "79b55c73-1d8c-44b9-8593-61e1770ad8d2";
load-address = <0xfe200000>;
};
+
+ ivy {
+ uuid = "eaba83d8-baaf-4eaf-8144-f7fdcbe544a7";
+ load-address = <0xfe600000>;
+ owner = "Plat";
+ };
#endif
#endif /* ARM_BL2_SP_LIST_DTS */
};
diff --git a/plat/common/aarch64/plat_common.c b/plat/common/aarch64/plat_common.c
index 345fec3..38a5786 100644
--- a/plat/common/aarch64/plat_common.c
+++ b/plat/common/aarch64/plat_common.c
@@ -5,6 +5,8 @@
*/
#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
#include <arch_helpers.h>
#include <drivers/console.h>
@@ -53,7 +55,7 @@
*/
void plat_sdei_handle_masked_trigger(uint64_t mpidr, unsigned int intr)
{
- WARN("Spurious SDEI interrupt %u on masked PE %llx\n", intr, mpidr);
+ WARN("Spurious SDEI interrupt %u on masked PE %" PRIx64 "\n", intr, mpidr);
}
/*
@@ -93,7 +95,7 @@
ERROR_NL();
ERROR("Unhandled External Abort received on 0x%lx from %s\n",
read_mpidr_el1(), get_el_str(level));
- ERROR("exception reason=%u syndrome=0x%llx\n", ea_reason, syndrome);
+ ERROR("exception reason=%u syndrome=0x%" PRIx64 "\n", ea_reason, syndrome);
#if HANDLE_EA_EL3_FIRST
/* Skip backtrace for lower EL */
if (level != MODE_EL3) {
diff --git a/plat/common/plat_spmd_manifest.c b/plat/common/plat_spmd_manifest.c
index 8f4018c..b1fc13c 100644
--- a/plat/common/plat_spmd_manifest.c
+++ b/plat/common/plat_spmd_manifest.c
@@ -6,8 +6,10 @@
#include <assert.h>
#include <errno.h>
-#include <string.h>
+#include <inttypes.h>
#include <libfdt.h>
+#include <stdint.h>
+#include <string.h>
#include <common/bl_common.h>
#include <common/debug.h>
@@ -80,8 +82,8 @@
VERBOSE(" version: %u.%u\n", attr->major_version, attr->minor_version);
VERBOSE(" spmc_id: 0x%x\n", attr->spmc_id);
VERBOSE(" binary_size: 0x%x\n", attr->binary_size);
- VERBOSE(" load_address: 0x%llx\n", attr->load_address);
- VERBOSE(" entrypoint: 0x%llx\n", attr->entrypoint);
+ VERBOSE(" load_address: 0x%" PRIx64 "\n", attr->load_address);
+ VERBOSE(" entrypoint: 0x%" PRIx64 "\n", attr->entrypoint);
return 0;
}
diff --git a/plat/hisilicon/hikey/hikey_bl1_setup.c b/plat/hisilicon/hikey/hikey_bl1_setup.c
index 01c48ec..31ff820 100644
--- a/plat/hisilicon/hikey/hikey_bl1_setup.c
+++ b/plat/hisilicon/hikey/hikey_bl1_setup.c
@@ -6,6 +6,8 @@
#include <assert.h>
#include <errno.h>
+#include <inttypes.h>
+#include <stdint.h>
#include <string.h>
#include <arch_helpers.h>
@@ -155,7 +157,7 @@
__asm__ volatile ("msr cpacr_el1, %0" : : "r"(data));
__asm__ volatile ("mrs %0, cpacr_el1" : "=r"(data));
} while ((data & (3 << 20)) != (3 << 20));
- INFO("cpacr_el1:0x%llx\n", data);
+ INFO("cpacr_el1:0x%" PRIx64 "\n", data);
ep_info->args.arg0 = 0xffff & read_mpidr();
ep_info->spsr = SPSR_64(MODE_EL1, MODE_SP_ELX,
diff --git a/plat/hisilicon/poplar/bl31_plat_setup.c b/plat/hisilicon/poplar/bl31_plat_setup.c
index a4e17ca..fe60ddc 100644
--- a/plat/hisilicon/poplar/bl31_plat_setup.c
+++ b/plat/hisilicon/poplar/bl31_plat_setup.c
@@ -6,7 +6,9 @@
#include <assert.h>
#include <errno.h>
+#include <inttypes.h>
#include <stddef.h>
+#include <stdint.h>
#include <string.h>
#include <platform_def.h>
@@ -130,6 +132,6 @@
BL_COHERENT_RAM_BASE,
BL_COHERENT_RAM_END);
- INFO("Boot BL33 from 0x%lx for %llu Bytes\n",
+ INFO("Boot BL33 from 0x%lx for %" PRIu64 " Bytes\n",
bl33_image_ep_info.pc, bl33_image_ep_info.args.arg2);
}
diff --git a/plat/imx/imx8qm/imx8qm_bl31_setup.c b/plat/imx/imx8qm/imx8qm_bl31_setup.c
index 4ca6a5d..d9c9110 100644
--- a/plat/imx/imx8qm/imx8qm_bl31_setup.c
+++ b/plat/imx/imx8qm/imx8qm_bl31_setup.c
@@ -5,6 +5,8 @@
*/
#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
#include <stdbool.h>
#include <platform_def.h>
@@ -261,14 +263,14 @@
err = sc_rm_get_memreg_info(ipc_handle, mr, &start, &end);
if (err)
ERROR("Memreg get info failed, %u\n", mr);
- NOTICE("Memreg %u 0x%llx -- 0x%llx\n", mr, start, end);
+ NOTICE("Memreg %u 0x%" PRIx64 " -- 0x%" PRIx64 "\n", mr, start, end);
if (BL31_BASE >= start && (BL31_LIMIT - 1) <= end) {
mr_record = mr; /* Record the mr for ATF running */
} else {
err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
if (err)
- ERROR("Memreg assign failed, 0x%llx -- 0x%llx, \
- err %d\n", start, end, err);
+ ERROR("Memreg assign failed, 0x%" PRIx64 " -- 0x%" PRIx64 ", \
+ err %d\n", start, end, err);
}
}
}
@@ -280,23 +282,23 @@
if ((BL31_LIMIT - 1) < end) {
err = sc_rm_memreg_alloc(ipc_handle, &mr, BL31_LIMIT, end);
if (err)
- ERROR("sc_rm_memreg_alloc failed, 0x%llx -- 0x%llx\n",
- (sc_faddr_t)BL31_LIMIT, end);
+ ERROR("sc_rm_memreg_alloc failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
+ (sc_faddr_t)BL31_LIMIT, end);
err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
if (err)
- ERROR("Memreg assign failed, 0x%llx -- 0x%llx\n",
- (sc_faddr_t)BL31_LIMIT, end);
+ ERROR("Memreg assign failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
+ (sc_faddr_t)BL31_LIMIT, end);
}
if (start < (BL31_BASE - 1)) {
err = sc_rm_memreg_alloc(ipc_handle, &mr, start, BL31_BASE - 1);
if (err)
- ERROR("sc_rm_memreg_alloc failed, 0x%llx -- 0x%llx\n",
- start, (sc_faddr_t)BL31_BASE - 1);
+ ERROR("sc_rm_memreg_alloc failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
+ start, (sc_faddr_t)BL31_BASE - 1);
err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
if (err)
- ERROR("Memreg assign failed, 0x%llx -- 0x%llx\n",
- start, (sc_faddr_t)BL31_BASE - 1);
+ ERROR("Memreg assign failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
+ start, (sc_faddr_t)BL31_BASE - 1);
}
}
diff --git a/plat/imx/imx8qx/imx8qx_bl31_setup.c b/plat/imx/imx8qx/imx8qx_bl31_setup.c
index 3ff5400..3739cd6 100644
--- a/plat/imx/imx8qx/imx8qx_bl31_setup.c
+++ b/plat/imx/imx8qx/imx8qx_bl31_setup.c
@@ -5,7 +5,9 @@
*/
#include <assert.h>
+#include <inttypes.h>
#include <stdbool.h>
+#include <stdint.h>
#include <platform_def.h>
@@ -238,14 +240,14 @@
if (err)
ERROR("Memreg get info failed, %u\n", mr);
- NOTICE("Memreg %u 0x%llx -- 0x%llx\n", mr, start, end);
+ NOTICE("Memreg %u 0x%" PRIx64 " -- 0x%" PRIx64 "\n", mr, start, end);
if (BL31_BASE >= start && (BL31_LIMIT - 1) <= end) {
mr_record = mr; /* Record the mr for ATF running */
} else {
err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
if (err)
- ERROR("Memreg assign failed, 0x%llx -- 0x%llx, \
- err %d\n", start, end, err);
+ ERROR("Memreg assign failed, 0x%" PRIx64 " -- 0x%" PRIx64 ", \
+ err %d\n", start, end, err);
}
}
}
@@ -257,23 +259,23 @@
if ((BL31_LIMIT - 1) < end) {
err = sc_rm_memreg_alloc(ipc_handle, &mr, BL31_LIMIT, end);
if (err)
- ERROR("sc_rm_memreg_alloc failed, 0x%llx -- 0x%llx\n",
- (sc_faddr_t)BL31_LIMIT, end);
+ ERROR("sc_rm_memreg_alloc failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
+ (sc_faddr_t)BL31_LIMIT, end);
err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
if (err)
- ERROR("Memreg assign failed, 0x%llx -- 0x%llx\n",
- (sc_faddr_t)BL31_LIMIT, end);
+ ERROR("Memreg assign failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
+ (sc_faddr_t)BL31_LIMIT, end);
}
if (start < (BL31_BASE - 1)) {
err = sc_rm_memreg_alloc(ipc_handle, &mr, start, BL31_BASE - 1);
if (err)
- ERROR("sc_rm_memreg_alloc failed, 0x%llx -- 0x%llx\n",
- start, (sc_faddr_t)BL31_BASE - 1);
+ ERROR("sc_rm_memreg_alloc failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
+ start, (sc_faddr_t)BL31_BASE - 1);
err = sc_rm_assign_memreg(ipc_handle, os_part, mr);
if (err)
- ERROR("Memreg assign failed, 0x%llx -- 0x%llx\n",
- start, (sc_faddr_t)BL31_BASE - 1);
+ ERROR("Memreg assign failed, 0x%" PRIx64 " -- 0x%" PRIx64 "\n",
+ start, (sc_faddr_t)BL31_BASE - 1);
}
}
diff --git a/plat/marvell/armada/a3k/common/a3700_ea.c b/plat/marvell/armada/a3k/common/a3700_ea.c
index 4a58fc6..bc12845 100644
--- a/plat/marvell/armada/a3k/common/a3700_ea.c
+++ b/plat/marvell/armada/a3k/common/a3700_ea.c
@@ -4,6 +4,10 @@
* SPDX-License-Identifier: BSD-3-Clause
* https://spdx.org/licenses
*/
+
+#include <inttypes.h>
+#include <stdint.h>
+
#include <common/bl_common.h>
#include <common/debug.h>
#include <arch_helpers.h>
@@ -72,7 +76,7 @@
syndrome == A53_SERR_INT_AXI_SLVERR_ON_EXTERNAL_ACCESS) {
ERROR_NL();
ERROR("Ignoring Asynchronous External Abort with"
- " syndrome 0x%llx received on 0x%lx from %s\n",
+ " syndrome 0x%" PRIx64 " received on 0x%lx from %s\n",
syndrome, read_mpidr_el1(), get_el_str(level));
ERROR("SError interrupt: AXI SLVERR on external access\n");
ERROR("This indicates a bug in pci-aardvark.c driver\n");
diff --git a/plat/nvidia/tegra/common/tegra_bl31_setup.c b/plat/nvidia/tegra/common/tegra_bl31_setup.c
index cb4886f..6a3eae0 100644
--- a/plat/nvidia/tegra/common/tegra_bl31_setup.c
+++ b/plat/nvidia/tegra/common/tegra_bl31_setup.c
@@ -7,6 +7,7 @@
#include <assert.h>
#include <errno.h>
+#include <inttypes.h>
#include <stddef.h>
#include <string.h>
@@ -336,7 +337,7 @@
* Sanity check the input values
*/
if ((base == 0U) || (size_in_bytes == 0U)) {
- ERROR("NS address 0x%llx (%lld bytes) is invalid\n",
+ ERROR("NS address 0x%" PRIx64 " (%" PRId64 " bytes) is invalid\n",
base, size_in_bytes);
return -EINVAL;
}
@@ -347,7 +348,7 @@
if ((base < TEGRA_DRAM_BASE) || (base >= TEGRA_DRAM_END) ||
(end > TEGRA_DRAM_END)) {
- ERROR("NS address 0x%llx is out-of-bounds!\n", base);
+ ERROR("NS address 0x%" PRIx64 " is out-of-bounds!\n", base);
return -EFAULT;
}
@@ -356,7 +357,7 @@
* to check if the NS DRAM range overlaps the TZDRAM aperture.
*/
if ((base < (uint64_t)TZDRAM_END) && (end > tegra_bl31_phys_base)) {
- ERROR("NS address 0x%llx overlaps TZDRAM!\n", base);
+ ERROR("NS address 0x%" PRIx64 " overlaps TZDRAM!\n", base);
return -ENOTSUP;
}
diff --git a/plat/nvidia/tegra/soc/t186/drivers/mce/mce.c b/plat/nvidia/tegra/soc/t186/drivers/mce/mce.c
index 54d3b2c..aebaceb 100644
--- a/plat/nvidia/tegra/soc/t186/drivers/mce/mce.c
+++ b/plat/nvidia/tegra/soc/t186/drivers/mce/mce.c
@@ -7,6 +7,8 @@
#include <assert.h>
#include <errno.h>
+#include <inttypes.h>
+#include <stdint.h>
#include <string.h>
#include <arch.h>
@@ -341,7 +343,7 @@
break;
default:
- ERROR("unknown MCE command (%llu)\n", cmd);
+ ERROR("unknown MCE command (%" PRIu64 ")\n", cmd);
ret = EINVAL;
break;
}
diff --git a/plat/nvidia/tegra/soc/t194/drivers/mce/mce.c b/plat/nvidia/tegra/soc/t194/drivers/mce/mce.c
index e3d5bd5..af1c0aa 100644
--- a/plat/nvidia/tegra/soc/t194/drivers/mce/mce.c
+++ b/plat/nvidia/tegra/soc/t194/drivers/mce/mce.c
@@ -16,8 +16,10 @@
#include <mce_private.h>
#include <platform_def.h>
#include <stdbool.h>
+#include <stdint.h>
#include <string.h>
#include <errno.h>
+#include <inttypes.h>
#include <t194_nvg.h>
#include <tegra_def.h>
#include <tegra_platform.h>
@@ -69,7 +71,7 @@
break;
default:
- ERROR("unknown MCE command (%llu)\n", cmd);
+ ERROR("unknown MCE command (%" PRIu64 ")\n", cmd);
ret = -EINVAL;
break;
}
diff --git a/plat/nvidia/tegra/soc/t194/plat_ras.c b/plat/nvidia/tegra/soc/t194/plat_ras.c
index a322403..dbd6272 100644
--- a/plat/nvidia/tegra/soc/t194/plat_ras.c
+++ b/plat/nvidia/tegra/soc/t194/plat_ras.c
@@ -4,6 +4,7 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <inttypes.h>
#include <stdbool.h>
#include <stdint.h>
@@ -54,7 +55,7 @@
ras_lock();
- ERROR("MPIDR 0x%lx: exception reason=%u syndrome=0x%llx\n",
+ ERROR("MPIDR 0x%lx: exception reason=%u syndrome=0x%" PRIx64 "\n",
read_mpidr(), ea_reason, syndrome);
/* Call RAS EA handler */
@@ -146,7 +147,7 @@
/* enable the supported errors */
err_ctrl |= err_fr;
- VERBOSE("errselr_el1:0x%x, erxfr:0x%llx, err_ctrl:0x%llx\n",
+ VERBOSE("errselr_el1:0x%x, erxfr:0x%" PRIx64 ", err_ctrl:0x%" PRIx64 "\n",
idx_start + j, err_fr, err_ctrl);
/* enable specified errors, or set to 0 if no supported error */
@@ -288,7 +289,7 @@
/* keep the log print same as linux arm64_ras driver. */
ERROR("**************************************\n");
ERROR("RAS Error in %s, ERRSELR_EL1=0x%x:\n", name, errselr);
- ERROR("\tStatus = 0x%llx\n", status);
+ ERROR("\tStatus = 0x%" PRIx64 "\n", status);
/* Print uncorrectable errror information. */
if (ERR_STATUS_GET_FIELD(status, UE) != 0U) {
diff --git a/plat/nvidia/tegra/soc/t210/plat_sip_calls.c b/plat/nvidia/tegra/soc/t210/plat_sip_calls.c
index 904f8d6..e3484be 100644
--- a/plat/nvidia/tegra/soc/t210/plat_sip_calls.c
+++ b/plat/nvidia/tegra/soc/t210/plat_sip_calls.c
@@ -5,6 +5,9 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <inttypes.h>
+#include <stdint.h>
+
#include <arch.h>
#include <arch_helpers.h>
#include <assert.h>
@@ -71,7 +74,7 @@
case PMC_CRYPTO_OP_0:
case PMC_TSC_MULT_0:
case PMC_STICKY_BIT:
- ERROR("%s: error offset=0x%llx\n", __func__, x2);
+ ERROR("%s: error offset=0x%" PRIx64 "\n", __func__, x2);
return -EFAULT;
default:
/* Valid register */
diff --git a/plat/nxp/common/setup/ls_bl31_setup.c b/plat/nxp/common/setup/ls_bl31_setup.c
index 6cf6ae3..bd0ab4f 100644
--- a/plat/nxp/common/setup/ls_bl31_setup.c
+++ b/plat/nxp/common/setup/ls_bl31_setup.c
@@ -6,6 +6,8 @@
*/
#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
#ifdef LS_EL3_INTERRUPT_HANDLER
#include <ls_interrupt_mgmt.h>
@@ -126,7 +128,7 @@
loc_dram_regions_info->num_dram_regions;
dram_regions_info.total_dram_size =
loc_dram_regions_info->total_dram_size;
- VERBOSE("Number of DRAM Regions = %llx\n",
+ VERBOSE("Number of DRAM Regions = %" PRIx64 "\n",
dram_regions_info.num_dram_regions);
for (i = 0; i < dram_regions_info.num_dram_regions;
@@ -135,7 +137,7 @@
loc_dram_regions_info->region[i].addr;
dram_regions_info.region[i].size =
loc_dram_regions_info->region[i].size;
- VERBOSE("DRAM%d Size = %llx\n", i,
+ VERBOSE("DRAM%d Size = %" PRIx64 "\n", i,
dram_regions_info.region[i].size);
}
rcw_porsr1 = bl31_image_ep_info.args.arg4;
diff --git a/plat/renesas/rcar/bl2_plat_setup.c b/plat/renesas/rcar/bl2_plat_setup.c
index e07b96f..bbfa169 100644
--- a/plat/renesas/rcar/bl2_plat_setup.c
+++ b/plat/renesas/rcar/bl2_plat_setup.c
@@ -4,6 +4,8 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <inttypes.h>
+#include <stdint.h>
#include <string.h>
#include <libfdt.h>
@@ -622,7 +624,7 @@
return;
err:
- NOTICE("BL2: Cannot add memory node [%llx - %llx] to FDT (ret=%i)\n",
+ NOTICE("BL2: Cannot add memory node [%" PRIx64 " - %" PRIx64 "] to FDT (ret=%i)\n",
start, start + size - 1, ret);
panic();
}
@@ -638,7 +640,7 @@
if (!size)
continue;
- NOTICE("BL2: CH%d: %llx - %llx, %lld %siB\n",
+ NOTICE("BL2: CH%d: %" PRIx64 " - %" PRIx64 ", %" PRId64 " %siB\n",
chan, start, start + size - 1,
(size >> 30) ? : size >> 20,
(size >> 30) ? "G" : "M");
diff --git a/plat/renesas/rzg/bl2_plat_setup.c b/plat/renesas/rzg/bl2_plat_setup.c
index ccc2562..e9dbd20 100644
--- a/plat/renesas/rzg/bl2_plat_setup.c
+++ b/plat/renesas/rzg/bl2_plat_setup.c
@@ -4,6 +4,8 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <inttypes.h>
+#include <stdint.h>
#include <string.h>
#include <arch_helpers.h>
@@ -531,7 +533,7 @@
continue;
}
- NOTICE("BL2: CH%d: %llx - %llx, %lld %siB\n",
+ NOTICE("BL2: CH%d: %" PRIx64 " - %" PRIx64 ", %" PRId64 " %siB\n",
chan, start, start + size - 1U,
(size >> 30) ? : size >> 20,
(size >> 30) ? "G" : "M");
diff --git a/plat/rpi/rpi4/rpi4_bl31_setup.c b/plat/rpi/rpi4/rpi4_bl31_setup.c
index 5259859..2fb4d3d 100644
--- a/plat/rpi/rpi4/rpi4_bl31_setup.c
+++ b/plat/rpi/rpi4/rpi4_bl31_setup.c
@@ -5,6 +5,8 @@
*/
#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
#include <libfdt.h>
@@ -234,7 +236,7 @@
fdt_del_mem_rsv(dtb, i);
return;
}
- WARN("Keeping unknown /memreserve/ region at 0, size: %lld\n",
+ WARN("Keeping unknown /memreserve/ region at 0, size: %" PRId64 "\n",
size);
}
}
diff --git a/plat/st/common/stm32cubeprogrammer_usb.c b/plat/st/common/stm32cubeprogrammer_usb.c
index 4cd210e..19a6bba 100644
--- a/plat/st/common/stm32cubeprogrammer_usb.c
+++ b/plat/st/common/stm32cubeprogrammer_usb.c
@@ -116,7 +116,7 @@
dfu->address += *len;
if (dfu->address - dfu->base > dfu->len) {
- return -EIO;
+ return -EIO;
}
return 0;
diff --git a/plat/st/stm32mp1/platform.mk b/plat/st/stm32mp1/platform.mk
index c8c2e5f..badc926 100644
--- a/plat/st/stm32mp1/platform.mk
+++ b/plat/st/stm32mp1/platform.mk
@@ -159,15 +159,17 @@
PLAT_INCLUDES := -Iplat/st/common/include/
PLAT_INCLUDES += -Iplat/st/stm32mp1/include/
+ifeq (${STM32MP_USE_STM32IMAGE},1)
include common/fdt_wrappers.mk
+else
+include lib/fconf/fconf.mk
+endif
include lib/libfdt/libfdt.mk
PLAT_BL_COMMON_SOURCES := common/uuid.c \
plat/st/common/stm32mp_common.c \
plat/st/stm32mp1/stm32mp1_private.c
-PLAT_BL_COMMON_SOURCES += ${FDT_WRAPPERS_SOURCES}
-
PLAT_BL_COMMON_SOURCES += drivers/st/uart/aarch32/stm32_console.S
ifneq (${ENABLE_STACK_PROTECTOR},0)
@@ -199,14 +201,16 @@
plat/st/stm32mp1/stm32mp1_syscfg.c
ifneq (${STM32MP_USE_STM32IMAGE},1)
+BL2_SOURCES += ${FCONF_SOURCES} ${FCONF_DYN_SOURCES}
+
BL2_SOURCES += drivers/io/io_fip.c \
- lib/fconf/fconf.c \
- lib/fconf/fconf_dyn_cfg_getter.c \
plat/st/common/bl2_io_storage.c \
plat/st/common/stm32mp_fconf_io.c \
plat/st/stm32mp1/plat_bl2_mem_params_desc.c \
plat/st/stm32mp1/stm32mp1_fconf_firewall.c
else
+BL2_SOURCES += ${FDT_WRAPPERS_SOURCES}
+
BL2_SOURCES += drivers/io/io_dummy.c \
drivers/st/io/io_stm32image.c \
plat/st/common/bl2_stm32_io_storage.c \
diff --git a/plat/st/stm32mp1/sp_min/sp_min-stm32mp1.mk b/plat/st/stm32mp1/sp_min/sp_min-stm32mp1.mk
index 4d4820a..239b60a 100644
--- a/plat/st/stm32mp1/sp_min/sp_min-stm32mp1.mk
+++ b/plat/st/stm32mp1/sp_min/sp_min-stm32mp1.mk
@@ -15,6 +15,10 @@
plat/st/stm32mp1/stm32mp1_shared_resources.c \
plat/st/stm32mp1/stm32mp1_topology.c
+# FDT wrappers
+include common/fdt_wrappers.mk
+BL32_SOURCES += ${FDT_WRAPPERS_SOURCES}
+
# Generic GIC v2
include drivers/arm/gic/v2/gicv2.mk
diff --git a/plat/st/stm32mp1/stm32mp1_usb_dfu.c b/plat/st/stm32mp1/stm32mp1_usb_dfu.c
index 051d435..70fbba6 100644
--- a/plat/st/stm32mp1/stm32mp1_usb_dfu.c
+++ b/plat/st/stm32mp1/stm32mp1_usb_dfu.c
@@ -338,6 +338,8 @@
.get_usr_desc = stm32mp1_get_usr_desc,
.get_config_desc = stm32mp1_get_config_desc,
.get_device_qualifier_desc = stm32mp1_get_qualifier_desc,
+ /* only HS is supported, as ROM code */
+ .get_other_speed_config_desc = NULL,
};
static struct usb_handle usb_core_handle;
diff --git a/plat/xilinx/common/plat_startup.c b/plat/xilinx/common/plat_startup.c
index 8c9a049..f02f41e 100644
--- a/plat/xilinx/common/plat_startup.c
+++ b/plat/xilinx/common/plat_startup.c
@@ -5,6 +5,8 @@
*/
#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
#include <arch_helpers.h>
#include <common/debug.h>
@@ -170,12 +172,12 @@
(ATFHandoffParams->magic[1] != 'L') ||
(ATFHandoffParams->magic[2] != 'N') ||
(ATFHandoffParams->magic[3] != 'X')) {
- ERROR("BL31: invalid ATF handoff structure at %llx\n",
+ ERROR("BL31: invalid ATF handoff structure at %" PRIx64 "\n",
atf_handoff_addr);
return FSBL_HANDOFF_INVAL_STRUCT;
}
- VERBOSE("BL31: ATF handoff params at:0x%llx, entries:%u\n",
+ VERBOSE("BL31: ATF handoff params at:0x%" PRIx64 ", entries:%u\n",
atf_handoff_addr, ATFHandoffParams->num_entries);
if (ATFHandoffParams->num_entries > FSBL_MAX_PARTITIONS) {
ERROR("BL31: ATF handoff params: too many partitions (%u/%u)\n",
@@ -193,7 +195,7 @@
int target_estate, target_secure;
int target_cpu, target_endianness, target_el;
- VERBOSE("BL31: %zd: entry:0x%llx, flags:0x%llx\n", i,
+ VERBOSE("BL31: %zd: entry:0x%" PRIx64 ", flags:0x%" PRIx64 "\n", i,
ATFHandoffParams->partition[i].entry_point,
ATFHandoffParams->partition[i].flags);
@@ -254,7 +256,7 @@
}
}
- VERBOSE("Setting up %s entry point to:%llx, el:%x\n",
+ VERBOSE("Setting up %s entry point to:%" PRIx64 ", el:%x\n",
target_secure == FSBL_FLAGS_SECURE ? "BL32" : "BL33",
ATFHandoffParams->partition[i].entry_point,
target_el);
diff --git a/services/spd/trusty/trusty.c b/services/spd/trusty/trusty.c
index e102b82..7daebcd 100644
--- a/services/spd/trusty/trusty.c
+++ b/services/spd/trusty/trusty.c
@@ -6,8 +6,10 @@
*/
#include <assert.h>
+#include <inttypes.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <stdbool.h>
+#include <stdint.h>
#include <string.h>
#include <arch_helpers.h>
@@ -172,7 +174,7 @@
struct trusty_cpu_ctx *ctx;
if (cpu >= (uint64_t)PLATFORM_CORE_COUNT) {
- ERROR("%s: cpu %lld >= %d\n", __func__, cpu, PLATFORM_CORE_COUNT);
+ ERROR("%s: cpu %" PRId64 " >= %d\n", __func__, cpu, PLATFORM_CORE_COUNT);
return (uint64_t)SM_ERR_INVALID_PARAMETERS;
}
@@ -204,7 +206,7 @@
ret = trusty_context_switch(NON_SECURE, SMC_FC_FIQ_EXIT, 0, 0, 0);
if (ret.r0 != 1U) {
- INFO("%s(%p) SMC_FC_FIQ_EXIT returned unexpected value, %lld\n",
+ INFO("%s(%p) SMC_FC_FIQ_EXIT returned unexpected value, %" PRId64 "\n",
__func__, handle, ret.r0);
}
@@ -356,7 +358,7 @@
ret = trusty_context_switch(NON_SECURE, SMC_FC_CPU_SUSPEND, off, 0, 0);
if (ret.r0 != 0U) {
- INFO("%s: cpu %d, SMC_FC_CPU_SUSPEND returned unexpected value, %lld\n",
+ INFO("%s: cpu %d, SMC_FC_CPU_SUSPEND returned unexpected value, %" PRId64 "\n",
__func__, plat_my_core_pos(), ret.r0);
}
}
@@ -367,7 +369,7 @@
ret = trusty_context_switch(NON_SECURE, SMC_FC_CPU_RESUME, on, 0, 0);
if (ret.r0 != 0U) {
- INFO("%s: cpu %d, SMC_FC_CPU_RESUME returned unexpected value, %lld\n",
+ INFO("%s: cpu %d, SMC_FC_CPU_RESUME returned unexpected value, %" PRId64 "\n",
__func__, plat_my_core_pos(), ret.r0);
}
}
diff --git a/services/std_svc/sdei/sdei_intr_mgmt.c b/services/std_svc/sdei/sdei_intr_mgmt.c
index 399c2ec..87a1fb7 100644
--- a/services/std_svc/sdei/sdei_intr_mgmt.c
+++ b/services/std_svc/sdei/sdei_intr_mgmt.c
@@ -5,6 +5,8 @@
*/
#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
#include <string.h>
#include <arch_helpers.h>
@@ -459,8 +461,8 @@
* Interrupts received while this PE was masked can't be
* dispatched.
*/
- SDEI_LOG("interrupt %u on %llx while PE masked\n", map->intr,
- mpidr);
+ SDEI_LOG("interrupt %u on %" PRIx64 " while PE masked\n",
+ map->intr, mpidr);
if (is_event_shared(map))
sdei_map_lock(map);
@@ -531,8 +533,8 @@
if (is_event_shared(map))
sdei_map_unlock(map);
- SDEI_LOG("ACK %llx, ev:0x%x ss:%d spsr:%lx ELR:%lx\n", mpidr, map->ev_num,
- sec_state, read_spsr_el3(), read_elr_el3());
+ SDEI_LOG("ACK %" PRIx64 ", ev:0x%x ss:%d spsr:%lx ELR:%lx\n",
+ mpidr, map->ev_num, sec_state, read_spsr_el3(), read_elr_el3());
ctx = handle;
@@ -703,7 +705,7 @@
/* Having done sanity checks, pop dispatch */
(void) pop_dispatch();
- SDEI_LOG("EOI:%lx, 0x%x spsr:%lx elr:%lx\n", read_mpidr_el1(),
+ SDEI_LOG("EOI:%lx, %d spsr:%lx elr:%lx\n", read_mpidr_el1(),
map->ev_num, read_spsr_el3(), read_elr_el3());
/*
diff --git a/services/std_svc/sdei/sdei_main.c b/services/std_svc/sdei/sdei_main.c
index 4ceaae8..1f55102 100644
--- a/services/std_svc/sdei/sdei_main.c
+++ b/services/std_svc/sdei/sdei_main.c
@@ -6,7 +6,9 @@
#include <arch_helpers.h>
#include <assert.h>
+#include <inttypes.h>
#include <stddef.h>
+#include <stdint.h>
#include <string.h>
#include <bl31/bl31.h>
@@ -961,33 +963,33 @@
case SDEI_VERSION:
SDEI_LOG("> VER\n");
ret = (int64_t) sdei_version();
- SDEI_LOG("< VER:%llx\n", ret);
+ SDEI_LOG("< VER:%" PRIx64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_EVENT_REGISTER:
x5 = SMC_GET_GP(ctx, CTX_GPREG_X5);
- SDEI_LOG("> REG(n:0x%x e:%llx a:%llx f:%x m:%llx)\n", ev_num,
+ SDEI_LOG("> REG(n:%d e:%" PRIx64 " a:%" PRIx64 " f:%x m:%" PRIx64 "\n", ev_num,
x2, x3, (int) x4, x5);
ret = sdei_event_register(ev_num, x2, x3, x4, x5);
- SDEI_LOG("< REG:%lld\n", ret);
+ SDEI_LOG("< REG:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_EVENT_ENABLE:
SDEI_LOG("> ENABLE(n:%d)\n", (int) x1);
ret = sdei_event_enable(ev_num);
- SDEI_LOG("< ENABLE:%lld\n", ret);
+ SDEI_LOG("< ENABLE:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_EVENT_DISABLE:
SDEI_LOG("> DISABLE(n:0x%x)\n", ev_num);
ret = sdei_event_disable(ev_num);
- SDEI_LOG("< DISABLE:%lld\n", ret);
+ SDEI_LOG("< DISABLE:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_EVENT_CONTEXT:
SDEI_LOG("> CTX(p:%d):%lx\n", (int) x1, read_mpidr_el1());
ret = sdei_event_context(ctx, (unsigned int) x1);
- SDEI_LOG("< CTX:%lld\n", ret);
+ SDEI_LOG("< CTX:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_EVENT_COMPLETE_AND_RESUME:
@@ -995,10 +997,10 @@
/* Fallthrough */
case SDEI_EVENT_COMPLETE:
- SDEI_LOG("> COMPLETE(r:%u sta/ep:%llx):%lx\n",
- (unsigned int) resume, x1, read_mpidr_el1());
+ SDEI_LOG("> COMPLETE(r:%u sta/ep:%" PRIx64 "):%lx\n",
+ (unsigned int) resume, x1, read_mpidr_el1());
ret = sdei_event_complete(resume, x1);
- SDEI_LOG("< COMPLETE:%llx\n", ret);
+ SDEI_LOG("< COMPLETE:%" PRIx64 "\n", ret);
/*
* Set error code only if the call failed. If the call
@@ -1015,19 +1017,19 @@
case SDEI_EVENT_STATUS:
SDEI_LOG("> STAT(n:0x%x)\n", ev_num);
ret = sdei_event_status(ev_num);
- SDEI_LOG("< STAT:%lld\n", ret);
+ SDEI_LOG("< STAT:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_EVENT_GET_INFO:
SDEI_LOG("> INFO(n:0x%x, %d)\n", ev_num, (int) x2);
ret = sdei_event_get_info(ev_num, (int) x2);
- SDEI_LOG("< INFO:%lld\n", ret);
+ SDEI_LOG("< INFO:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_EVENT_UNREGISTER:
SDEI_LOG("> UNREG(n:0x%x)\n", ev_num);
ret = sdei_event_unregister(ev_num);
- SDEI_LOG("< UNREG:%lld\n", ret);
+ SDEI_LOG("< UNREG:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_PE_UNMASK:
@@ -1039,49 +1041,49 @@
case SDEI_PE_MASK:
SDEI_LOG("> MASK:%lx\n", read_mpidr_el1());
ret = sdei_pe_mask();
- SDEI_LOG("< MASK:%lld\n", ret);
+ SDEI_LOG("< MASK:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_INTERRUPT_BIND:
SDEI_LOG("> BIND(%d)\n", (int) x1);
ret = sdei_interrupt_bind((unsigned int) x1);
- SDEI_LOG("< BIND:%lld\n", ret);
+ SDEI_LOG("< BIND:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_INTERRUPT_RELEASE:
SDEI_LOG("> REL(0x%x)\n", ev_num);
ret = sdei_interrupt_release(ev_num);
- SDEI_LOG("< REL:%lld\n", ret);
+ SDEI_LOG("< REL:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_SHARED_RESET:
SDEI_LOG("> S_RESET():%lx\n", read_mpidr_el1());
ret = sdei_shared_reset();
- SDEI_LOG("< S_RESET:%lld\n", ret);
+ SDEI_LOG("< S_RESET:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_PRIVATE_RESET:
SDEI_LOG("> P_RESET():%lx\n", read_mpidr_el1());
ret = sdei_private_reset();
- SDEI_LOG("< P_RESET:%lld\n", ret);
+ SDEI_LOG("< P_RESET:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_EVENT_ROUTING_SET:
- SDEI_LOG("> ROUTE_SET(n:0x%x f:%llx aff:%llx)\n", ev_num, x2, x3);
+ SDEI_LOG("> ROUTE_SET(n:%d f:%" PRIx64 " aff:%" PRIx64 ")\n", ev_num, x2, x3);
ret = sdei_event_routing_set(ev_num, x2, x3);
- SDEI_LOG("< ROUTE_SET:%lld\n", ret);
+ SDEI_LOG("< ROUTE_SET:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_FEATURES:
- SDEI_LOG("> FTRS(f:%llx)\n", x1);
+ SDEI_LOG("> FTRS(f:%" PRIx64 ")\n", x1);
ret = (int64_t) sdei_features((unsigned int) x1);
- SDEI_LOG("< FTRS:%llx\n", ret);
+ SDEI_LOG("< FTRS:%" PRIx64 "\n", ret);
SMC_RET1(ctx, ret);
case SDEI_EVENT_SIGNAL:
- SDEI_LOG("> SIGNAL(e:0x%x t:%llx)\n", ev_num, x2);
+ SDEI_LOG("> SIGNAL(e:%d t:%" PRIx64 ")\n", ev_num, x2);
ret = sdei_signal(ev_num, x2);
- SDEI_LOG("< SIGNAL:%lld\n", ret);
+ SDEI_LOG("< SIGNAL:%" PRId64 "\n", ret);
SMC_RET1(ctx, ret);
default:
diff --git a/services/std_svc/spmd/spmd_main.c b/services/std_svc/spmd/spmd_main.c
index 109a1bc..1390d88 100644
--- a/services/std_svc/spmd/spmd_main.c
+++ b/services/std_svc/spmd/spmd_main.c
@@ -6,6 +6,8 @@
#include <assert.h>
#include <errno.h>
+#include <inttypes.h>
+#include <stdint.h>
#include <string.h>
#include <arch_helpers.h>
@@ -50,7 +52,7 @@
int core_idx = plat_core_pos_by_mpidr(mpidr);
if (core_idx < 0) {
- ERROR("Invalid mpidr: %llx, returned ID: %d\n", mpidr, core_idx);
+ ERROR("Invalid mpidr: %" PRIx64 ", returned ID: %d\n", mpidr, core_idx);
panic();
}
@@ -157,7 +159,7 @@
rc = spmd_spm_core_sync_entry(ctx);
if (rc != 0ULL) {
- ERROR("SPMC initialisation failed 0x%llx\n", rc);
+ ERROR("SPMC initialisation failed 0x%" PRIx64 "\n", rc);
return 0;
}
@@ -506,12 +508,12 @@
/* Determine which security state this SMC originated from */
secure_origin = is_caller_secure(flags);
- VERBOSE("SPM(%u): 0x%x 0x%llx 0x%llx 0x%llx 0x%llx "
- "0x%llx 0x%llx 0x%llx\n",
- linear_id, smc_fid, x1, x2, x3, x4,
- SMC_GET_GP(handle, CTX_GPREG_X5),
- SMC_GET_GP(handle, CTX_GPREG_X6),
- SMC_GET_GP(handle, CTX_GPREG_X7));
+ VERBOSE("SPM(%u): 0x%x 0x%" PRIx64 " 0x%" PRIx64 " 0x%" PRIx64 " 0x%" PRIx64
+ " 0x%" PRIx64 " 0x%" PRIx64 " 0x%" PRIx64 "\n",
+ linear_id, smc_fid, x1, x2, x3, x4,
+ SMC_GET_GP(handle, CTX_GPREG_X5),
+ SMC_GET_GP(handle, CTX_GPREG_X6),
+ SMC_GET_GP(handle, CTX_GPREG_X7));
switch (smc_fid) {
case FFA_ERROR:
@@ -559,15 +561,6 @@
* forward to SPM Core which will handle it if implemented.
*/
- /*
- * Check if x1 holds a valid FFA fid. This is an
- * optimization.
- */
- if (!is_ffa_fid(x1)) {
- return spmd_ffa_error_return(handle,
- FFA_ERROR_NOT_SUPPORTED);
- }
-
/* Forward SMC from Normal world to the SPM Core */
if (!secure_origin) {
return spmd_smc_forward(smc_fid, secure_origin,
diff --git a/services/std_svc/spmd/spmd_pm.c b/services/std_svc/spmd/spmd_pm.c
index ac962ea..6ebafca 100644
--- a/services/std_svc/spmd/spmd_pm.c
+++ b/services/std_svc/spmd/spmd_pm.c
@@ -6,6 +6,9 @@
#include <assert.h>
#include <errno.h>
+#include <inttypes.h>
+#include <stdint.h>
+
#include <lib/el3_runtime/context_mgmt.h>
#include <lib/spinlock.h>
#include "spmd_private.h"
@@ -110,7 +113,7 @@
rc = spmd_spm_core_sync_entry(ctx);
if (rc != 0ULL) {
- ERROR("%s failed (%llu) on CPU%u\n", __func__, rc,
+ ERROR("%s failed (%" PRIu64 ") on CPU%u\n", __func__, rc,
linear_id);
ctx->state = SPMC_STATE_OFF;
return;
@@ -138,7 +141,7 @@
rc = spmd_spm_core_sync_entry(ctx);
if (rc != 0ULL) {
- ERROR("%s failed (%llu) on CPU%u\n", __func__, rc, linear_id);
+ ERROR("%s failed (%" PRIu64 ") on CPU%u\n", __func__, rc, linear_id);
}
/* Expect a direct message response from the SPMC. */
