Merge changes from topic "ck/mpmm" into integration
* changes:
docs(maintainers): add Chris Kay to AMU and MPMM
feat(tc): enable MPMM
feat(mpmm): add support for MPMM
feat(amu): enable per-core AMU auxiliary counters
docs(amu): add AMU documentation
refactor(amu): refactor enablement and context switching
refactor(amu): detect auxiliary counters at runtime
refactor(amu): detect architected counters at runtime
refactor(amu): conditionally compile auxiliary counter support
refactor(amu): factor out register accesses
refactor(amu)!: privatize unused AMU APIs
refactor(amu)!: remove `PLAT_AMU_GROUP1_COUNTERS_MASK`
build(amu): introduce `amu.mk`
build(fconf)!: clean up source collection
feat(fdt-wrappers): add CPU enumeration utility function
build(fdt-wrappers): introduce FDT wrappers makefile
build(bl2): deduplicate sources
build(bl1): deduplicate sources
diff --git a/Makefile b/Makefile
index 0caa9c0..e5ab324 100644
--- a/Makefile
+++ b/Makefile
@@ -150,8 +150,6 @@
ifeq (${USE_SPINLOCK_CAS},1)
ifneq (${ARCH},aarch64)
$(error USE_SPINLOCK_CAS requires AArch64)
-else
- $(info USE_SPINLOCK_CAS is an experimental feature)
endif
endif
@@ -525,7 +523,6 @@
endif
ifeq (${SPD},spmd)
- $(warning "SPMD is an experimental feature")
# SPMD is located in std_svc directory
SPD_DIR := std_svc
@@ -731,12 +728,7 @@
# SDEI_IN_FCONF is only supported when SDEI_SUPPORT is enabled.
ifeq ($(SDEI_SUPPORT)-$(SDEI_IN_FCONF),0-1)
-$(error "SDEI_IN_FCONF is an experimental feature and is only supported when \
- SDEI_SUPPORT is enabled")
-endif
-
-ifeq ($(COT_DESC_IN_DTB),1)
- $(info CoT in device tree is an experimental feature)
+$(error "SDEI_IN_FCONF is only supported when SDEI_SUPPORT is enabled")
endif
# If pointer authentication is used in the firmware, make sure that all the
@@ -751,24 +743,12 @@
ifeq ($(CTX_INCLUDE_PAUTH_REGS),1)
ifneq (${ARCH},aarch64)
$(error CTX_INCLUDE_PAUTH_REGS requires AArch64)
- else
- $(info CTX_INCLUDE_PAUTH_REGS is an experimental feature)
endif
endif
-ifeq ($(ENABLE_PAUTH),1)
- $(info Pointer Authentication is an experimental feature)
-endif
-
-ifeq ($(ENABLE_BTI),1)
- $(info Branch Protection is an experimental feature)
-endif
-
ifeq ($(CTX_INCLUDE_MTE_REGS),1)
ifneq (${ARCH},aarch64)
$(error CTX_INCLUDE_MTE_REGS requires AArch64)
- else
- $(info CTX_INCLUDE_MTE_REGS is an experimental feature)
endif
endif
@@ -778,8 +758,6 @@
ifeq ($(MEASURED_BOOT),1)
ifneq (${TRUSTED_BOARD_BOOT},1)
$(error MEASURED_BOOT requires TRUSTED_BOARD_BOOT=1)
- else
- $(info MEASURED_BOOT is an experimental feature)
endif
endif
@@ -796,8 +774,6 @@
ifneq (${DECRYPTION_SUPPORT},none)
ifeq (${TRUSTED_BOARD_BOOT}, 0)
$(error TRUSTED_BOARD_BOOT must be enabled for DECRYPTION_SUPPORT to be set)
- else
- $(info DECRYPTION_SUPPORT is an experimental feature)
endif
endif
diff --git a/docs/about/features.rst b/docs/about/features.rst
index f5fc1e0..4b7fbe5 100644
--- a/docs/about/features.rst
+++ b/docs/about/features.rst
@@ -74,7 +74,7 @@
loading of a hardware configuration (for example, a kernel device tree)
as part of the FIP, to be passed through the firmware stages.
This feature is now incorporated inside the firmware configuration framework
- (fconf), which is still flagged as experimental.
+ (fconf).
- Support for alternative boot flows, for example to support platforms where
the EL3 Runtime Software is loaded using other firmware or a separate
@@ -94,9 +94,7 @@
- Support for ARMv8.3 pointer authentication in the normal and secure worlds.
The use of pointer authentication in the normal world is enabled whenever
architectural support is available, without the need for additional build
- flags. Use of pointer authentication in the secure world remains an
- experimental configuration at this time and requires the
- ``BRANCH_PROTECTION`` option to be set to non-zero.
+ flags.
- Position-Independent Executable (PIE) support. Currently for BL2, BL31, and
TSP, with further support to be added in a future release.
diff --git a/docs/design/firmware-design.rst b/docs/design/firmware-design.rst
index c12e73f..ef500ff 100644
--- a/docs/design/firmware-design.rst
+++ b/docs/design/firmware-design.rst
@@ -2616,8 +2616,6 @@
``CTX_INCLUDE_PAUTH_REGS`` to 1. This enables pointer authentication in BL1,
BL2, BL31, and the TSP if it is used.
- These options are experimental features.
-
Note that Pointer Authentication is enabled for Non-secure world irrespective
of the value of these build flags if the CPU supports it.
@@ -2629,8 +2627,7 @@
~~~~~~~~~
- Branch Target Identification feature is selected by ``BRANCH_PROTECTION``
- option set to 1. This option defaults to 0 and this is an experimental
- feature.
+ option set to 1. This option defaults to 0.
- Memory Tagging Extension feature is unconditionally enabled for both worlds
(at EL0 and S-EL0) if it is only supported at EL0. If instead it is
diff --git a/docs/design/trusted-board-boot.rst b/docs/design/trusted-board-boot.rst
index 96cf24c..46177d7 100644
--- a/docs/design/trusted-board-boot.rst
+++ b/docs/design/trusted-board-boot.rst
@@ -239,9 +239,6 @@
R060_TBBR_FUNCTION as specified in the `Trusted Board Boot Requirements (TBBR)`_
document.
-Note that due to security considerations and complexity of this feature, it is
-marked as experimental.
-
Firmware Encryption Tool
------------------------
diff --git a/docs/getting_started/build-options.rst b/docs/getting_started/build-options.rst
index da8d554..04e3c0b 100644
--- a/docs/getting_started/build-options.rst
+++ b/docs/getting_started/build-options.rst
@@ -120,7 +120,7 @@
| 4 | bti | N | Y |
+-------+--------------+-------+-----+
- This option defaults to 0 and this is an experimental feature.
+ This option defaults to 0.
Note that Pointer Authentication is enabled for Non-secure world
irrespective of the value of this option if the CPU supports it.
@@ -181,7 +181,7 @@
- ``CTX_INCLUDE_PAUTH_REGS``: Boolean option that, when set to 1, enables
Pointer Authentication for Secure world. This will cause the ARMv8.3-PAuth
registers to be included when saving and restoring the CPU context as
- part of world switch. Default value is 0 and this is an experimental feature.
+ part of world switch. Default value is 0.
Note that Pointer Authentication is enabled for Non-secure world irrespective
of the value of this flag if the CPU supports it.
@@ -192,7 +192,7 @@
authenticated decryption algorithm to be used to decrypt firmware/s during
boot. It accepts 2 values: ``aes_gcm`` and ``none``. The default value of
this flag is ``none`` to disable firmware decryption which is an optional
- feature as per TBBR. Also, it is an experimental feature.
+ feature as per TBBR.
- ``DISABLE_BIN_GENERATION``: Boolean option to disable the generation
of the binary image. If set to 1, then only the ELF image is built.
@@ -330,20 +330,18 @@
component of the option ``-fstack-protector-$ENABLE_STACK_PROTECTOR``.
- ``ENCRYPT_BL31``: Binary flag to enable encryption of BL31 firmware. This
- flag depends on ``DECRYPTION_SUPPORT`` build flag which is marked as
- experimental.
+ flag depends on ``DECRYPTION_SUPPORT`` build flag.
- ``ENCRYPT_BL32``: Binary flag to enable encryption of Secure BL32 payload.
- This flag depends on ``DECRYPTION_SUPPORT`` build flag which is marked as
- experimental.
+ This flag depends on ``DECRYPTION_SUPPORT`` build flag.
- ``ENC_KEY``: A 32-byte (256-bit) symmetric key in hex string format. It could
either be SSK or BSSK depending on ``FW_ENC_STATUS`` flag. This value depends
- on ``DECRYPTION_SUPPORT`` build flag which is marked as experimental.
+ on ``DECRYPTION_SUPPORT`` build flag.
- ``ENC_NONCE``: A 12-byte (96-bit) encryption nonce or Initialization Vector
(IV) in hex string format. This value depends on ``DECRYPTION_SUPPORT``
- build flag which is marked as experimental.
+ build flag.
- ``ERROR_DEPRECATED``: This option decides whether to treat the usage of
deprecated platform APIs, helper functions or drivers within Trusted
@@ -382,8 +380,7 @@
1: Encryption is done with Binding Secret Symmetric Key (BSSK) which is
unique per device.
- This flag depends on ``DECRYPTION_SUPPORT`` build flag which is marked as
- experimental.
+ This flag depends on ``DECRYPTION_SUPPORT`` build flag.
- ``GENERATE_COT``: Boolean flag used to build and execute the ``cert_create``
tool to create certificates as per the Chain of Trust described in
@@ -502,8 +499,7 @@
in order to provide trust that the code taking the measurements and recording
them has not been tampered with.
- This option defaults to 0 and is an experimental feature in the stage of
- development.
+ This option defaults to 0.
- ``NON_TRUSTED_WORLD_KEY``: This option is used when ``GENERATE_COT=1``. It
specifies the file that contains the Non-Trusted World private key in PEM
@@ -713,26 +709,25 @@
- ``ARM_IO_IN_DTB``: This flag determines whether to use IO based on the
firmware configuration framework. This will move the io_policies into a
configuration device tree, instead of static structure in the code base.
- This is currently an experimental feature.
- ``COT_DESC_IN_DTB``: This flag determines whether to create COT descriptors
at runtime using fconf. If this flag is enabled, COT descriptors are
statically captured in tb_fw_config file in the form of device tree nodes
and properties. Currently, COT descriptors used by BL2 are moved to the
device tree and COT descriptors used by BL1 are retained in the code
- base statically. This is currently an experimental feature.
+ base statically.
- ``SDEI_IN_FCONF``: This flag determines whether to configure SDEI setup in
runtime using firmware configuration framework. The platform specific SDEI
shared and private events configuration is retrieved from device tree rather
- than static C structures at compile time. This is currently an experimental
- feature and is only supported if SDEI_SUPPORT build flag is enabled.
+ than static C structures at compile time. This is only supported if
+ SDEI_SUPPORT build flag is enabled.
- ``SEC_INT_DESC_IN_FCONF``: This flag determines whether to configure Group 0
and Group1 secure interrupts using the firmware configuration framework. The
platform specific secure interrupt property descriptor is retrieved from
device tree in runtime rather than depending on static C structure at compile
- time. This is currently an experimental feature.
+ time.
- ``USE_ROMLIB``: This flag determines whether library at ROM will be used.
This feature creates a library of functions to be placed in ROM and thus
diff --git a/docs/getting_started/porting-guide.rst b/docs/getting_started/porting-guide.rst
index 6f577f9..92ff39f 100644
--- a/docs/getting_started/porting-guide.rst
+++ b/docs/getting_started/porting-guide.rst
@@ -882,8 +882,7 @@
On success the function should return 0 and a negative error code otherwise.
-Note that this API depends on ``DECRYPTION_SUPPORT`` build flag which is
-marked as experimental.
+Note that this API depends on ``DECRYPTION_SUPPORT`` build flag.
Function : plat_fwu_set_images_source() [when PSA_FWU_SUPPORT == 1]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/drivers/arm/gic/v3/gic600_multichip.c b/drivers/arm/gic/v3/gic600_multichip.c
index fd3d8c2..5f42ad9 100644
--- a/drivers/arm/gic/v3/gic600_multichip.c
+++ b/drivers/arm/gic/v3/gic600_multichip.c
@@ -18,8 +18,6 @@
#include "../common/gic_common_private.h"
#include "gic600_multichip_private.h"
-#warning "GIC-600 Multichip driver is currently experimental and the API may change in future."
-
/*******************************************************************************
* GIC-600 multichip operation related helper functions
******************************************************************************/
@@ -212,8 +210,6 @@
gic600_multichip_validate_data(multichip_data);
- INFO("GIC-600 Multichip driver is experimental\n");
-
/*
* Ensure that G0/G1S/G1NS interrupts are disabled. This also ensures
* that GIC-600 Multichip configuration is done first.
diff --git a/plat/arm/board/fvp/fdts/fvp_fw_config.dts b/plat/arm/board/fvp/fdts/fvp_fw_config.dts
index cad888f..c26b519 100644
--- a/plat/arm/board/fvp/fdts/fvp_fw_config.dts
+++ b/plat/arm/board/fvp/fdts/fvp_fw_config.dts
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2019-2020, ARM Limited. All rights reserved.
+ * Copyright (c) 2019-2021, ARM Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
@@ -45,12 +45,10 @@
};
#endif
-#if !defined(SPD_spmd)
nt_fw-config {
load-address = <0x0 0x80000000>;
max-size = <0x200>;
id = <NT_FW_CONFIG_ID>;
};
-#endif
};
};
diff --git a/plat/arm/common/arm_bl31_setup.c b/plat/arm/common/arm_bl31_setup.c
index 6472590..a6f7df5 100644
--- a/plat/arm/common/arm_bl31_setup.c
+++ b/plat/arm/common/arm_bl31_setup.c
@@ -218,6 +218,10 @@
* Linux kernel tree, Linux expects the physical address of the device
* tree blob (DTB) in x0, while x1-x3 are reserved for future use and
* must be 0.
+ * Repurpose the option to load Hafnium hypervisor in the normal world.
+ * It expects its manifest address in x0. This is essentially the linux
+ * dts (passed to the primary VM) by adding 'hypervisor' and chosen
+ * nodes specifying the Hypervisor configuration.
*/
#if RESET_TO_BL31
bl33_image_ep_info.args.arg0 = (u_register_t)ARM_PRELOADED_DTB_BASE;
@@ -228,14 +232,6 @@
bl33_image_ep_info.args.arg2 = 0U;
bl33_image_ep_info.args.arg3 = 0U;
# endif
-
-#if defined(SPD_spmd)
- /*
- * Hafnium in normal world expects its manifest address in x0, In CI
- * configuration manifest is preloaded at 0x80000000(start of DRAM).
- */
- bl33_image_ep_info.args.arg0 = (u_register_t)ARM_DRAM1_BASE;
-#endif
}
void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
diff --git a/plat/arm/css/sgi/include/sgi_base_platform_def.h b/plat/arm/css/sgi/include/sgi_base_platform_def.h
index d795f25..c9c8c04 100644
--- a/plat/arm/css/sgi/include/sgi_base_platform_def.h
+++ b/plat/arm/css/sgi/include/sgi_base_platform_def.h
@@ -89,7 +89,7 @@
*
*/
#if TRUSTED_BOARD_BOOT
-# define PLAT_ARM_MAX_BL2_SIZE (0x1D000 + ((CSS_SGI_CHIP_COUNT - 1) * \
+# define PLAT_ARM_MAX_BL2_SIZE (0x20000 + ((CSS_SGI_CHIP_COUNT - 1) * \
0x2000))
#else
# define PLAT_ARM_MAX_BL2_SIZE (0x14000 + ((CSS_SGI_CHIP_COUNT - 1) * \
diff --git a/plat/imx/imx8m/imx8mm/include/platform_def.h b/plat/imx/imx8m/imx8mm/include/platform_def.h
index e86938b..6709678 100644
--- a/plat/imx/imx8m/imx8mm/include/platform_def.h
+++ b/plat/imx/imx8m/imx8mm/include/platform_def.h
@@ -4,6 +4,7 @@
* SPDX-License-Identifier: BSD-3-Clause
*/
+#include <arch.h>
#include <common/tbbr/tbbr_img_def.h>
#define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
