Merge changes Ib9c82b85,Ib348e097,I4dc315e4,I58a8ce44,Iebc03361, ... into integration
* changes:
plat: marvell: armada: a8k: add OP-TEE OS MMU tables
drivers: marvell: add support for mapping the entire LLC to SRAM
plat: marvell: armada: add LLC SRAM CCU setup for AP806/AP807 platforms
plat: marvell: armada: reduce memory size reserved for FIP image
plat: marvell: armada: platform definitions cleanup
plat: marvell: armada: a8k: check CCU window state before loading MSS BL2
drivers: marvell: add CCU driver API for window state checking
drivers: marvell: align and extend llc macros
plat: marvell: a8k: move address config of cp1/2 to BL2
plat: marvell: armada: re-enable BL32_BASE definition
plat: marvell: a8k: extend includes to take advantage of the phy_porting_layer
marvell: comphy: initialize common phy selector for AP mode
marvell: comphy: update rx_training procedure
plat: marvell: armada: configure amb for all CPs
plat: marvell: armada: modify PLAT_FAMILY name for 37xx SoCs
diff --git a/docs/plat/marvell/armada/build.rst b/docs/plat/marvell/armada/build.rst
index 6f28721..bec0bcb 100644
--- a/docs/plat/marvell/armada/build.rst
+++ b/docs/plat/marvell/armada/build.rst
@@ -77,6 +77,13 @@
Flag defining the LLC (L3) cache state. The cache is enabled by default (``LLC_ENABLE=1``).
+- LLC_SRAM
+
+ Flag defining the LLC (L3) cache SRAM support. The feature is
+ disabled by default (``LLC_ENABLE=0``).
+ When LLC SRAM is enabled, the secure payload (BL32) is loaded into this
+ SRAM area instead of the DRAM.
+
- MARVELL_SECURE_BOOT
Build trusted(=1)/non trusted(=0) image, default is non trusted.
diff --git a/drivers/marvell/cache_llc.c b/drivers/marvell/cache_llc.c
index 3df93a4..836aae7 100644
--- a/drivers/marvell/cache_llc.c
+++ b/drivers/marvell/cache_llc.c
@@ -31,19 +31,19 @@
void llc_flush_all(int ap_index)
{
- mmio_write_32(L2X0_CLEAN_INV_WAY(ap_index), LLC_WAY_MASK);
+ mmio_write_32(LLC_CLEAN_INV_WAY(ap_index), LLC_ALL_WAYS_MASK);
llc_cache_sync(ap_index);
}
void llc_clean_all(int ap_index)
{
- mmio_write_32(L2X0_CLEAN_WAY(ap_index), LLC_WAY_MASK);
+ mmio_write_32(LLC_CLEAN_WAY(ap_index), LLC_ALL_WAYS_MASK);
llc_cache_sync(ap_index);
}
void llc_inv_all(int ap_index)
{
- mmio_write_32(L2X0_INV_WAY(ap_index), LLC_WAY_MASK);
+ mmio_write_32(LLC_INV_WAY(ap_index), LLC_ALL_WAYS_MASK);
llc_cache_sync(ap_index);
}
@@ -109,3 +109,41 @@
reg |= (0x1 << CCU_SET_POC_OFFSET);
mmio_write_32(CCU_HTC_CR(ap_index), reg);
}
+
+#if LLC_SRAM
+void llc_sram_enable(int ap_index)
+{
+ uint32_t tc, way;
+ uint32_t way_addr;
+
+ /* Lockdown all available ways for all traffic classes */
+ for (tc = 0; tc < LLC_TC_NUM; tc++)
+ mmio_write_32(LLC_TCN_LOCK(ap_index, tc), LLC_WAY_MASK);
+
+ /* Clear the high bits of SRAM address */
+ mmio_write_32(LLC_BANKED_MNT_AHR(ap_index), 0);
+
+ way_addr = PLAT_MARVELL_TRUSTED_RAM_BASE;
+ for (way = 0; way < LLC_WAYS; way++) {
+ /* Trigger allocation block command */
+ mmio_write_32(LLC_BLK_ALOC(ap_index),
+ LLC_BLK_ALOC_BASE_ADDR(way_addr) |
+ LLC_BLK_ALOC_WAY_DATA_CLR |
+ LLC_BLK_ALOC_WAY_ID(way));
+ way_addr += LLC_WAY_SIZE;
+ }
+ llc_enable(ap_index, 1);
+}
+
+void llc_sram_disable(int ap_index)
+{
+ uint32_t tc;
+
+ /* Disable the line lockings */
+ for (tc = 0; tc < LLC_TC_NUM; tc++)
+ mmio_write_32(LLC_TCN_LOCK(ap_index, tc), 0);
+
+ /* Invalidate all ways */
+ llc_inv_all(ap_index);
+}
+#endif /* LLC_SRAM */
diff --git a/drivers/marvell/ccu.c b/drivers/marvell/ccu.c
index 1e4ab44..c73516e 100644
--- a/drivers/marvell/ccu.c
+++ b/drivers/marvell/ccu.c
@@ -54,8 +54,8 @@
win_id));
start = ((uint64_t)alr << ADDRESS_SHIFT);
end = (((uint64_t)ahr + 0x10) << ADDRESS_SHIFT);
- printf("\tccu %02x 0x%016llx 0x%016llx\n",
- target_id, start, end);
+ printf("\tccu%d %02x 0x%016llx 0x%016llx\n",
+ win_id, target_id, start, end);
}
}
win_cr = mmio_read_32(CCU_WIN_GCR_OFFSET(ap_index));
@@ -81,6 +81,12 @@
}
}
+int ccu_is_win_enabled(int ap_index, uint32_t win_id)
+{
+ return mmio_read_32(CCU_WIN_CR_OFFSET(ap_index, win_id)) &
+ WIN_ENABLE_BIT;
+}
+
void ccu_enable_win(int ap_index, struct addr_map_win *win, uint32_t win_id)
{
uint32_t ccu_win_reg;
diff --git a/drivers/marvell/comphy/comphy-cp110.h b/drivers/marvell/comphy/comphy-cp110.h
index 6eb7fd0..3678c90 100644
--- a/drivers/marvell/comphy/comphy-cp110.h
+++ b/drivers/marvell/comphy/comphy-cp110.h
@@ -659,18 +659,32 @@
(0x3f << HPIPE_SAVED_DFE_VALUES_SAV_F0D_OFFSET)
#define HPIPE_CDR_CONTROL_REG 0x418
-#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET 14
-#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_MASK \
- (0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET)
-#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET 12
-#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK \
- (0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET)
-#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET 9
-#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK \
- (0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CRD_MIDPOINT_PHASE_OS_OFFSET 0
+#define HPIPE_CRD_MIDPOINT_PHASE_OS_MASK \
+ (0x3f << HPIPE_CRD_MIDPOINT_PHASE_OS_OFFSET)
#define HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET 6
#define HPIPE_CDR_MAX_DFE_ADAPT_1_MASK \
(0x7 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET 9
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK \
+ (0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET 12
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK \
+ (0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET)
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET 14
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_0_MASK \
+ (0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_0_OFFSET)
+
+
+#define HPIPE_CDR_CONTROL1_REG 0x41c
+#define HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_OFF 12
+#define HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_MASK \
+ (0xf << HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_OFF)
+
+#define HPIPE_CDR_CONTROL2_REG 0x420
+#define HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_OFF 12
+#define HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_MASK \
+ (0xf << HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_OFF)
#define HPIPE_TX_TRAIN_CTRL_11_REG 0x438
#define HPIPE_TX_STATUS_CHECK_MODE_OFFSET 6
@@ -749,6 +763,30 @@
#define HPIPE_DFE_CTRL_28_PIPE4_MASK \
(0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET)
+#define HPIPE_TRX0_REG 0x4cc /*in doc 0x133*4*/
+#define HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_OFF 2
+#define HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_MASK \
+ (0x1 << HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_OFF)
+#define HPIPE_TRX0_GAIN_TRAIN_WITH_C_OFF 0
+#define HPIPE_TRX0_GAIN_TRAIN_WITH_C_MASK \
+ (0x1 << HPIPE_TRX0_GAIN_TRAIN_WITH_C_OFF)
+
+#define HPIPE_TRX_REG1 0x4d0 /*in doc 0x134*4*/
+#define HPIPE_TRX_REG1_MIN_BOOST_MODE_OFF 3
+#define HPIPE_TRX_REG1_MIN_BOOST_MODE_MASK \
+ (0x1 << HPIPE_TRX_REG1_MIN_BOOST_MODE_OFF)
+#define HPIPE_TRX_REG1_SUMFTAP_EN_OFF 10
+#define HPIPE_TRX_REG1_SUMFTAP_EN_MASK \
+ (0x3f << HPIPE_TRX_REG1_SUMFTAP_EN_OFF)
+
+#define HPIPE_TRX_REG2 0x4d8 /*in doc 0x136*4*/
+#define HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_OFF 11
+#define HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_MASK \
+ (0x1f << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_OFF)
+#define HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_OFF 7
+#define HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_MASK \
+ (0xf << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_OFF)
+
#define HPIPE_G1_SETTING_5_REG 0x538
#define HPIPE_G1_SETTING_5_G1_ICP_OFFSET 0
#define HPIPE_G1_SETTING_5_G1_ICP_MASK \
diff --git a/drivers/marvell/comphy/phy-comphy-cp110.c b/drivers/marvell/comphy/phy-comphy-cp110.c
index b682086..2760f46 100644
--- a/drivers/marvell/comphy/phy-comphy-cp110.c
+++ b/drivers/marvell/comphy/phy-comphy-cp110.c
@@ -209,8 +209,10 @@
* as SFI1/XFI1 available only for CP115.
*/
if ((mode == COMPHY_SGMII_MODE ||
- mode == COMPHY_HS_SGMII_MODE ||
- mode == COMPHY_SFI_MODE || mode == COMPHY_XFI_MODE)
+ mode == COMPHY_HS_SGMII_MODE ||
+ mode == COMPHY_SFI_MODE ||
+ mode == COMPHY_XFI_MODE ||
+ mode == COMPHY_AP_MODE)
&& COMPHY_GET_ID(comphy_mode) == 1)
reg |= COMMON_SELECTOR_COMPHY4_PORT1 <<
comphy_offset;
@@ -2012,12 +2014,58 @@
return ret;
}
+static void rx_pre_train(uint64_t comphy_base, uint8_t comphy_index)
+{
+ uintptr_t hpipe_addr;
+ uint32_t mask, data;
+
+ hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
+ comphy_index);
+
+ debug("rx_training preparation\n\n");
+
+ mask = HPIPE_TRX0_GAIN_TRAIN_WITH_C_MASK;
+ data = (0x1 << HPIPE_TRX0_GAIN_TRAIN_WITH_C_OFF);
+ mask |= HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_MASK;
+ data |= (0x0 << HPIPE_TRX0_GAIN_TRAIN_WITH_SAMPLER_OFF);
+ reg_set(hpipe_addr + HPIPE_TRX0_REG, data, mask);
+
+
+ mask = HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_MASK;
+ data = (0x1e << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_OFF);
+ mask |= HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_MASK;
+ data |= (0x0 << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_K_OFF);
+ reg_set(hpipe_addr + HPIPE_TRX_REG2, data, mask);
+
+ mask = HPIPE_TRX_REG1_MIN_BOOST_MODE_MASK;
+ data = (0x1 << HPIPE_TRX_REG1_MIN_BOOST_MODE_OFF);
+ reg_set(hpipe_addr + HPIPE_TRX_REG1, data, mask);
+
+ mask = HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_MASK;
+ data = (0x8 << HPIPE_CRD2_CRD_MIDPOINT_SMALL_THRES_K_OFF);
+ reg_set(hpipe_addr + HPIPE_CDR_CONTROL1_REG, data, mask);
+
+ mask = HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_MASK;
+ data = (0x8 << HPIPE_CRD2_CRD_MIDPOINT_LARGE_THRES_K_OFF);
+ reg_set(hpipe_addr + HPIPE_CDR_CONTROL2_REG, data, mask);
+
+ mask = HPIPE_CRD_MIDPOINT_PHASE_OS_MASK;
+ data = (0x0 << HPIPE_CRD_MIDPOINT_PHASE_OS_OFFSET);
+ reg_set(hpipe_addr + HPIPE_CDR_CONTROL_REG, data, mask);
+
+ mask = HPIPE_TRX_REG1_SUMFTAP_EN_MASK;
+ data = (0x38 << HPIPE_TRX_REG1_SUMFTAP_EN_OFF);
+ mask |= HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_MASK;
+ data |= (0x1e << HPIPE_TRX_REG2_SUMF_BOOST_TARGET_C_OFF);
+ reg_set(hpipe_addr + HPIPE_TRX_REG1, data, mask);
+}
+
int mvebu_cp110_comphy_xfi_rx_training(uint64_t comphy_base,
uint8_t comphy_index)
{
uint32_t mask, data, timeout;
uint32_t g1_ffe_cap_sel, g1_ffe_res_sel, align90, g1_dfe_res;
- uintptr_t hpipe_addr, sd_ip_addr;
+ uintptr_t hpipe_addr;
uint8_t ap_nr, cp_nr;
@@ -2025,30 +2073,10 @@
hpipe_addr = HPIPE_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
comphy_index);
- sd_ip_addr = SD_ADDR(COMPHY_PIPE_FROM_COMPHY_ADDR(comphy_base),
- comphy_index);
debug_enter();
- debug("stage: RF Reset\n");
-
- /* Release from hard reset */
- mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
- data = 0x0 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
- mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
- data |= 0x0 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
- mask |= SD_EXTERNAL_CONFIG1_RF_RESET_IN_MASK;
- data |= 0x0 << SD_EXTERNAL_CONFIG1_RF_RESET_IN_OFFSET;
- reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
-
- mask = SD_EXTERNAL_CONFIG1_RESET_IN_MASK;
- data = 0x1 << SD_EXTERNAL_CONFIG1_RESET_IN_OFFSET;
- mask |= SD_EXTERNAL_CONFIG1_RESET_CORE_MASK;
- data |= 0x1 << SD_EXTERNAL_CONFIG1_RESET_CORE_OFFSET;
- reg_set(sd_ip_addr + SD_EXTERNAL_CONFIG1_REG, data, mask);
-
- /* Wait 50ms - until band gap and ref clock ready */
- mdelay(50);
+ rx_pre_train(comphy_base, comphy_index);
debug("Preparation for rx_training\n\n");
@@ -2068,34 +2096,10 @@
data = 0 << HPIPE_DFE_RES_FORCE_OFFSET;
reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
- debug("PRBS31 loppback\n\n");
-
- /* Configure PRBS counters */
- mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
- data = 0xe << HPIPE_PHY_TEST_PATTERN_SEL_OFFSET;
- reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
-
- mask = HPIPE_PHY_TEST_DATA_MASK;
- data = 0xc4 << HPIPE_PHY_TEST_DATA_OFFSET;
- reg_set(hpipe_addr + HPIPE_PHY_TEST_DATA_REG, data, mask);
-
- mask = HPIPE_PHY_TEST_EN_MASK;
- data = 0x1 << HPIPE_PHY_TEST_EN_OFFSET;
- reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
-
- mdelay(10);
- debug("Enable TX/RX training\n\n");
+ debug("Enable RX training\n\n");
mask = HPIPE_TRX_RX_TRAIN_EN_MASK;
data = 0x1 << HPIPE_TRX_RX_TRAIN_EN_OFFSET;
- mask |= HPIPE_TRX_RX_ANA_IF_CLK_ENE_MASK;
- data |= 0x1 << HPIPE_TRX_RX_ANA_IF_CLK_ENE_OFFSET;
- mask |= HPIPE_TRX_TX_CTRL_CLK_EN_MASK;
- data |= 0x1 << HPIPE_TRX_TX_CTRL_CLK_EN_OFFSET;
- mask |= HPIPE_TRX_UPDATE_THEN_HOLD_MASK;
- data |= 0x1 << HPIPE_TRX_UPDATE_THEN_HOLD_OFFSET;
- mask |= HPIPE_TRX_TX_F0T_EO_BASED_MASK;
- data |= 0x1 << HPIPE_TRX_TX_F0T_EO_BASED_OFFSET;
reg_set(hpipe_addr + HPIPE_TRX_TRAIN_CTRL_0_REG, data, mask);
/* Check the result of RX training */
@@ -2180,21 +2184,9 @@
data = 1 << HPIPE_G1_SETTINGS_3_G1_FFE_SETTING_FORCE_OFFSET;
reg_set(hpipe_addr + HPIPE_G1_SETTINGS_3_REG, data, mask);
- /* Use the value from CAL_OS_PH_EXT */
- mask = HPIPE_CAL_RXCLKALIGN_90_EXT_EN_MASK;
- data = 1 << HPIPE_CAL_RXCLKALIGN_90_EXT_EN_OFFSET;
- reg_set(hpipe_addr + HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG,
- data, mask);
-
- /* Update align90 */
- mask = HPIPE_CAL_OS_PH_EXT_MASK;
- data = align90 << HPIPE_CAL_OS_PH_EXT_OFFSET;
- reg_set(hpipe_addr + HPIPE_RX_CLK_ALIGN90_AND_TX_IDLE_CALIB_CTRL_REG,
- data, mask);
-
/* Force DFE resolution (use gen table value) */
mask = HPIPE_DFE_RES_FORCE_MASK;
- data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
+ data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
/* 0x111-G1 DFE_Setting_4 */
@@ -2202,38 +2194,6 @@
data = g1_dfe_res << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET;
reg_set(hpipe_addr + HPIPE_G1_SETTINGS_4_REG, data, mask);
- debug("PRBS31 loppback\n\n");
-
- mask = HPIPE_PHY_TEST_PT_TESTMODE_MASK;
- data = 0x1 << HPIPE_PHY_TEST_PT_TESTMODE_OFFSET;
- reg_set(hpipe_addr + HPIPE_PHY_TEST_OOB_0_REGISTER, data, mask);
-
- /* Configure PRBS counters */
- mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
- data = 0xe << HPIPE_PHY_TEST_PATTERN_SEL_OFFSET;
- reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
-
- mask = HPIPE_PHY_TEST_DATA_MASK;
- data = 0xc4 << HPIPE_PHY_TEST_DATA_OFFSET;
- reg_set(hpipe_addr + HPIPE_PHY_TEST_DATA_REG, data, mask);
-
- mask = HPIPE_PHY_TEST_EN_MASK;
- data = 0x1 << HPIPE_PHY_TEST_EN_OFFSET;
- reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
-
- /* Reset PRBS error counter */
- mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
- data = 0x1 << HPIPE_PHY_TEST_RESET_OFFSET;
- reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
-
- mask = HPIPE_PHY_TEST_PATTERN_SEL_MASK;
- data = 0x0 << HPIPE_PHY_TEST_RESET_OFFSET;
- reg_set(hpipe_addr + HPIPE_PHY_TEST_CONTROL_REG, data, mask);
-
- mask = HPIPE_PHY_TEST_PT_TESTMODE_MASK;
- data = 0x1 << HPIPE_PHY_TEST_PT_TESTMODE_OFFSET;
- reg_set(hpipe_addr + HPIPE_PHY_TEST_OOB_0_REGISTER, data, mask);
-
printf("########################################################\n");
printf("# To use trained values update the ATF sources:\n");
printf("# plat/marvell/armada/a8k/<board_type>/board/phy-porting-layer.h ");
@@ -2252,12 +2212,6 @@
printf("};\n\n");
printf("########################################################\n");
- /* check */
- debug("PRBS error counter[0x%lx] 0x%x\n\n",
- hpipe_addr + HPIPE_PHY_TEST_PRBS_ERROR_COUNTER_1_REG,
- mmio_read_32(hpipe_addr +
- HPIPE_PHY_TEST_PRBS_ERROR_COUNTER_1_REG));
-
rx_trainng_done[ap_nr][cp_nr][comphy_index] = 1;
return 0;
@@ -2273,12 +2227,16 @@
* the network registers like: MG, AP, MAC, PCS, Serdes etc.)
*/
static int mvebu_cp110_comphy_ap_power_on(uint64_t comphy_base,
- uint8_t comphy_index)
+ uint8_t comphy_index,
+ uint32_t comphy_mode)
{
uint32_t mask, data;
uintptr_t comphy_addr = comphy_addr =
COMPHY_ADDR(comphy_base, comphy_index);
+ /* configure phy selector for XFI/SFI */
+ mvebu_cp110_comphy_set_phy_selector(comphy_base, comphy_index,
+ comphy_mode);
debug_enter();
debug("stage: RFU configurations - hard reset comphy\n");
/* RFU configurations - hard reset comphy */
@@ -2371,7 +2329,8 @@
comphy_mode);
break;
case (COMPHY_AP_MODE):
- err = mvebu_cp110_comphy_ap_power_on(comphy_base, comphy_index);
+ err = mvebu_cp110_comphy_ap_power_on(comphy_base, comphy_index,
+ comphy_mode);
break;
default:
ERROR("comphy%d: unsupported comphy mode\n", comphy_index);
diff --git a/include/drivers/marvell/cache_llc.h b/include/drivers/marvell/cache_llc.h
index 85babb8..b326474 100644
--- a/include/drivers/marvell/cache_llc.h
+++ b/include/drivers/marvell/cache_llc.h
@@ -13,19 +13,35 @@
#define CACHE_LLC_H
#define LLC_CTRL(ap) (MVEBU_LLC_BASE(ap) + 0x100)
+#define LLC_SECURE_CTRL(ap) (MVEBU_LLC_BASE(ap) + 0x10C)
#define LLC_SYNC(ap) (MVEBU_LLC_BASE(ap) + 0x700)
-#define L2X0_INV_WAY(ap) (MVEBU_LLC_BASE(ap) + 0x77C)
-#define L2X0_CLEAN_WAY(ap) (MVEBU_LLC_BASE(ap) + 0x7BC)
-#define L2X0_CLEAN_INV_WAY(ap) (MVEBU_LLC_BASE(ap) + 0x7FC)
-#define LLC_TC0_LOCK(ap) (MVEBU_LLC_BASE(ap) + 0x920)
+#define LLC_BANKED_MNT_AHR(ap) (MVEBU_LLC_BASE(ap) + 0x724)
+#define LLC_INV_WAY(ap) (MVEBU_LLC_BASE(ap) + 0x77C)
+#define LLC_BLK_ALOC(ap) (MVEBU_LLC_BASE(ap) + 0x78c)
+#define LLC_CLEAN_WAY(ap) (MVEBU_LLC_BASE(ap) + 0x7BC)
+#define LLC_CLEAN_INV_WAY(ap) (MVEBU_LLC_BASE(ap) + 0x7FC)
+#define LLC_TCN_LOCK(ap, tc) (MVEBU_LLC_BASE(ap) + 0x920 + 4 * (tc))
#define MASTER_LLC_CTRL LLC_CTRL(MVEBU_AP0)
-#define MASTER_L2X0_INV_WAY L2X0_INV_WAY(MVEBU_AP0)
-#define MASTER_LLC_TC0_LOCK LLC_TC0_LOCK(MVEBU_AP0)
+#define MASTER_LLC_INV_WAY LLC_INV_WAY(MVEBU_AP0)
+#define MASTER_LLC_TC0_LOCK LLC_TCN_LOCK(MVEBU_AP0, 0)
#define LLC_CTRL_EN 1
#define LLC_EXCLUSIVE_EN 0x100
-#define LLC_WAY_MASK 0xFFFFFFFF
+#define LLC_ALL_WAYS_MASK 0xFFFFFFFF
+
+/* AP806/AP807 - 1MB 8-ways LLC */
+#define LLC_WAYS 8
+#define LLC_WAY_MASK ((1 << LLC_WAYS) - 1)
+#define LLC_SIZE (1024 * 1024)
+#define LLC_WAY_SIZE (LLC_SIZE / LLC_WAYS)
+#define LLC_TC_NUM 15
+
+#define LLC_BLK_ALOC_WAY_ID(way) ((way) & 0x1f)
+#define LLC_BLK_ALOC_WAY_DATA_DSBL (0x0 << 6)
+#define LLC_BLK_ALOC_WAY_DATA_CLR (0x1 << 6)
+#define LLC_BLK_ALOC_WAY_DATA_SET (0x3 << 6)
+#define LLC_BLK_ALOC_BASE_ADDR(addr) ((addr) & (LLC_WAY_SIZE - 1))
#ifndef __ASSEMBLER__
void llc_cache_sync(int ap_index);
@@ -36,6 +52,10 @@
void llc_enable(int ap_index, int excl_mode);
int llc_is_exclusive(int ap_index);
void llc_runtime_enable(int ap_index);
-#endif
+#if LLC_SRAM
+void llc_sram_enable(int ap_index);
+void llc_sram_disable(int ap_index);
+#endif /* LLC_SRAM */
+#endif /* __ASSEMBLY__ */
#endif /* CACHE_LLC_H */
diff --git a/include/drivers/marvell/ccu.h b/include/drivers/marvell/ccu.h
index b0d1ec9..413ffb9 100644
--- a/include/drivers/marvell/ccu.h
+++ b/include/drivers/marvell/ccu.h
@@ -46,6 +46,7 @@
void ccu_dram_target_set(int ap_index, uint32_t target);
void ccu_save_win_all(int ap_id);
void ccu_restore_win_all(int ap_id);
+int ccu_is_win_enabled(int ap_index, uint32_t win_id);
#endif
#endif /* CCU_H */
diff --git a/include/plat/marvell/armada/a3700/common/armada_common.h b/include/plat/marvell/armada/a3k/common/armada_common.h
similarity index 100%
rename from include/plat/marvell/armada/a3700/common/armada_common.h
rename to include/plat/marvell/armada/a3k/common/armada_common.h
diff --git a/include/plat/marvell/armada/a3700/common/board_marvell_def.h b/include/plat/marvell/armada/a3k/common/board_marvell_def.h
similarity index 95%
rename from include/plat/marvell/armada/a3700/common/board_marvell_def.h
rename to include/plat/marvell/armada/a3k/common/board_marvell_def.h
index 1782596..bc3e04f 100644
--- a/include/plat/marvell/armada/a3700/common/board_marvell_def.h
+++ b/include/plat/marvell/armada/a3k/common/board_marvell_def.h
@@ -71,6 +71,4 @@
#define MAX_IO_DEVICES 3
#define MAX_IO_HANDLES 4
-#define PLAT_MARVELL_TRUSTED_SRAM_SIZE 0x80000 /* 512 KB */
-
#endif /* BOARD_MARVELL_DEF_H */
diff --git a/include/plat/marvell/armada/a3700/common/marvell_def.h b/include/plat/marvell/armada/a3k/common/marvell_def.h
similarity index 89%
rename from include/plat/marvell/armada/a3700/common/marvell_def.h
rename to include/plat/marvell/armada/a3k/common/marvell_def.h
index eb13ba8..1394c05 100644
--- a/include/plat/marvell/armada/a3700/common/marvell_def.h
+++ b/include/plat/marvell/armada/a3k/common/marvell_def.h
@@ -49,15 +49,17 @@
*/
#define MARVELL_LOCAL_STATE_OFF 2
+/* This leaves a gap between end of DRAM and start of ROM block */
+#define MARVELL_TRUSTED_DRAM_SIZE 0x80000 /* 512 KB */
+
/* The first 4KB of Trusted SRAM are used as shared memory */
-#define MARVELL_TRUSTED_SRAM_BASE PLAT_MARVELL_ATF_BASE
-#define MARVELL_SHARED_RAM_BASE MARVELL_TRUSTED_SRAM_BASE
+#define MARVELL_SHARED_RAM_BASE PLAT_MARVELL_ATF_BASE
#define MARVELL_SHARED_RAM_SIZE 0x00001000 /* 4 KB */
/* The remaining Trusted SRAM is used to load the BL images */
#define MARVELL_BL_RAM_BASE (MARVELL_SHARED_RAM_BASE + \
MARVELL_SHARED_RAM_SIZE)
-#define MARVELL_BL_RAM_SIZE (PLAT_MARVELL_TRUSTED_SRAM_SIZE - \
+#define MARVELL_BL_RAM_SIZE (MARVELL_TRUSTED_DRAM_SIZE - \
MARVELL_SHARED_RAM_SIZE)
#define MARVELL_DRAM_BASE ULL(0x0)
@@ -65,7 +67,7 @@
#define MARVELL_DRAM_END (MARVELL_DRAM_BASE + \
MARVELL_DRAM_SIZE - 1)
-#define MARVELL_IRQ_SEC_PHY_TIMER 29
+#define MARVELL_IRQ_SEC_PHY_TIMER 29
#define MARVELL_IRQ_SEC_SGI_0 8
#define MARVELL_IRQ_SEC_SGI_1 9
@@ -86,7 +88,6 @@
MARVELL_DRAM_SIZE, \
MT_MEMORY | MT_RW | MT_NS)
-
/*
* The number of regions like RO(code), coherent and data required by
* different BL stages which need to be mapped in the MMU.
@@ -173,5 +174,15 @@
#define BL31_LIMIT (MARVELL_BL_RAM_BASE + \
MARVELL_BL_RAM_SIZE)
+/*****************************************************************************
+ * BL32 specific defines.
+ *****************************************************************************
+ */
+#define BL32_BASE PLAT_MARVELL_TRUSTED_RAM_BASE
+#define BL32_LIMIT (BL32_BASE + PLAT_MARVELL_TRUSTED_RAM_SIZE)
+
+#ifdef SPD_none
+#undef BL32_BASE
+#endif /* SPD_none */
#endif /* MARVELL_DEF_H */
diff --git a/include/plat/marvell/armada/a3700/common/plat_marvell.h b/include/plat/marvell/armada/a3k/common/plat_marvell.h
similarity index 100%
rename from include/plat/marvell/armada/a3700/common/plat_marvell.h
rename to include/plat/marvell/armada/a3k/common/plat_marvell.h
diff --git a/include/plat/marvell/armada/a8k/common/board_marvell_def.h b/include/plat/marvell/armada/a8k/common/board_marvell_def.h
index 0da56e7..7e90f5f 100644
--- a/include/plat/marvell/armada/a8k/common/board_marvell_def.h
+++ b/include/plat/marvell/armada/a8k/common/board_marvell_def.h
@@ -71,7 +71,4 @@
#define MAX_IO_DEVICES 3
#define MAX_IO_HANDLES 4
-#define PLAT_MARVELL_TRUSTED_SRAM_SIZE 0x80000 /* 512 KB */
-
-
#endif /* BOARD_MARVELL_DEF_H */
diff --git a/include/plat/marvell/armada/a8k/common/marvell_def.h b/include/plat/marvell/armada/a8k/common/marvell_def.h
index 4eda01f..1245b88 100644
--- a/include/plat/marvell/armada/a8k/common/marvell_def.h
+++ b/include/plat/marvell/armada/a8k/common/marvell_def.h
@@ -47,15 +47,17 @@
*/
#define MARVELL_LOCAL_STATE_OFF 2
+/* This leaves a gap between end of DRAM and start of ROM block */
+#define MARVELL_TRUSTED_DRAM_SIZE 0x80000 /* 512 KB */
+
/* The first 4KB of Trusted SRAM are used as shared memory */
-#define MARVELL_TRUSTED_SRAM_BASE PLAT_MARVELL_ATF_BASE
-#define MARVELL_SHARED_RAM_BASE MARVELL_TRUSTED_SRAM_BASE
+#define MARVELL_SHARED_RAM_BASE PLAT_MARVELL_ATF_BASE
#define MARVELL_SHARED_RAM_SIZE 0x00001000 /* 4 KB */
/* The remaining Trusted SRAM is used to load the BL images */
#define MARVELL_BL_RAM_BASE (MARVELL_SHARED_RAM_BASE + \
MARVELL_SHARED_RAM_SIZE)
-#define MARVELL_BL_RAM_SIZE (PLAT_MARVELL_TRUSTED_SRAM_SIZE - \
+#define MARVELL_BL_RAM_SIZE (MARVELL_TRUSTED_DRAM_SIZE - \
MARVELL_SHARED_RAM_SIZE)
/* Non-shared DRAM */
#define MARVELL_DRAM_BASE ULL(0x0)
@@ -75,9 +77,40 @@
#define MARVELL_IRQ_SEC_SGI_6 14
#define MARVELL_IRQ_SEC_SGI_7 15
-#define MARVELL_MAP_SHARED_RAM MAP_REGION_FLAT( \
- MARVELL_SHARED_RAM_BASE,\
- MARVELL_SHARED_RAM_SIZE,\
+#ifdef SPD_opteed
+/*
+ * BL2 needs to map 4MB at the end of TZC_DRAM1 in order to
+ * load/authenticate the trusted os extra image. The first 512KB of
+ * TZC_DRAM1 are reserved for trusted os (OPTEE). The extra image loading
+ * for OPTEE is paged image which only include the paging part using
+ * virtual memory but without "init" data. OPTEE will copy the "init" data
+ * (from pager image) to the first 512KB of TZC_DRAM, and then copy the
+ * extra image behind the "init" data.
+ */
+#define MARVELL_OPTEE_PAGEABLE_LOAD_BASE \
+ (PLAT_MARVELL_TRUSTED_RAM_BASE + \
+ PLAT_MARVELL_TRUSTED_RAM_SIZE - \
+ MARVELL_OPTEE_PAGEABLE_LOAD_SIZE)
+#define MARVELL_OPTEE_PAGEABLE_LOAD_SIZE 0x400000
+#define MARVELL_OPTEE_PAGEABLE_LOAD_MEM \
+ MAP_REGION_FLAT( \
+ MARVELL_OPTEE_PAGEABLE_LOAD_BASE, \
+ MARVELL_OPTEE_PAGEABLE_LOAD_SIZE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+
+/*
+ * Map the memory for the OP-TEE core (also known as OP-TEE pager when paging
+ * support is enabled).
+ */
+#define MARVELL_MAP_OPTEE_CORE_MEM MAP_REGION_FLAT( \
+ BL32_BASE, \
+ BL32_LIMIT - BL32_BASE, \
+ MT_MEMORY | MT_RW | MT_SECURE)
+#endif /* SPD_opteed */
+
+#define MARVELL_MAP_SECURE_RAM MAP_REGION_FLAT( \
+ MARVELL_SHARED_RAM_BASE, \
+ MARVELL_SHARED_RAM_SIZE, \
MT_MEMORY | MT_RW | MT_SECURE)
#define MARVELL_MAP_DRAM MAP_REGION_FLAT( \
@@ -85,7 +118,6 @@
MARVELL_DRAM_SIZE, \
MT_MEMORY | MT_RW | MT_NS)
-
/*
* The number of regions like RO(code), coherent and data required by
* different BL stages which need to be mapped in the MMU.
@@ -177,5 +209,14 @@
#define BL31_LIMIT (MARVELL_BL_RAM_BASE + \
MARVELL_BL_RAM_SIZE)
+/*******************************************************************************
+ * BL32 specific defines.
+ ******************************************************************************/
+#define BL32_BASE PLAT_MARVELL_TRUSTED_RAM_BASE
+#define BL32_LIMIT (BL32_BASE + PLAT_MARVELL_TRUSTED_RAM_SIZE)
+
+#ifdef SPD_none
+#undef BL32_BASE
+#endif /* SPD_none */
#endif /* MARVELL_DEF_H */
diff --git a/plat/marvell/armada/a3700/a3700/board/pm_src.c b/plat/marvell/armada/a3k/a3700/board/pm_src.c
similarity index 100%
rename from plat/marvell/armada/a3700/a3700/board/pm_src.c
rename to plat/marvell/armada/a3k/a3700/board/pm_src.c
diff --git a/plat/marvell/armada/a3700/a3700/mvebu_def.h b/plat/marvell/armada/a3k/a3700/mvebu_def.h
similarity index 100%
rename from plat/marvell/armada/a3700/a3700/mvebu_def.h
rename to plat/marvell/armada/a3k/a3700/mvebu_def.h
diff --git a/plat/marvell/armada/a3700/a3700/plat_bl31_setup.c b/plat/marvell/armada/a3k/a3700/plat_bl31_setup.c
similarity index 100%
rename from plat/marvell/armada/a3700/a3700/plat_bl31_setup.c
rename to plat/marvell/armada/a3k/a3700/plat_bl31_setup.c
diff --git a/plat/marvell/armada/a3700/a3700/platform.mk b/plat/marvell/armada/a3k/a3700/platform.mk
similarity index 75%
rename from plat/marvell/armada/a3700/a3700/platform.mk
rename to plat/marvell/armada/a3k/a3700/platform.mk
index bd9464a..050af41 100644
--- a/plat/marvell/armada/a3700/a3700/platform.mk
+++ b/plat/marvell/armada/a3k/a3700/platform.mk
@@ -5,6 +5,6 @@
# https://spdx.org/licenses
#
-include plat/marvell/armada/a3700/common/a3700_common.mk
+include plat/marvell/armada/a3k/common/a3700_common.mk
include plat/marvell/armada/common/marvell_common.mk
diff --git a/plat/marvell/armada/a3700/common/a3700_common.mk b/plat/marvell/armada/a3k/common/a3700_common.mk
similarity index 99%
rename from plat/marvell/armada/a3700/common/a3700_common.mk
rename to plat/marvell/armada/a3k/common/a3700_common.mk
index 36865a8..9965567 100644
--- a/plat/marvell/armada/a3700/common/a3700_common.mk
+++ b/plat/marvell/armada/a3k/common/a3700_common.mk
@@ -7,7 +7,7 @@
MARVELL_PLAT_BASE := plat/marvell/armada
MARVELL_PLAT_INCLUDE_BASE := include/plat/marvell/armada
-PLAT_FAMILY := a3700
+PLAT_FAMILY := a3k
PLAT_FAMILY_BASE := $(MARVELL_PLAT_BASE)/$(PLAT_FAMILY)
PLAT_INCLUDE_BASE := $(MARVELL_PLAT_INCLUDE_BASE)/$(PLAT_FAMILY)
PLAT_COMMON_BASE := $(PLAT_FAMILY_BASE)/common
diff --git a/plat/marvell/armada/a3700/common/a3700_ea.c b/plat/marvell/armada/a3k/common/a3700_ea.c
similarity index 100%
rename from plat/marvell/armada/a3700/common/a3700_ea.c
rename to plat/marvell/armada/a3k/common/a3700_ea.c
diff --git a/plat/marvell/armada/a3700/common/a3700_sip_svc.c b/plat/marvell/armada/a3k/common/a3700_sip_svc.c
similarity index 100%
rename from plat/marvell/armada/a3700/common/a3700_sip_svc.c
rename to plat/marvell/armada/a3k/common/a3700_sip_svc.c
diff --git a/plat/marvell/armada/a3700/common/aarch64/a3700_common.c b/plat/marvell/armada/a3k/common/aarch64/a3700_common.c
similarity index 100%
rename from plat/marvell/armada/a3700/common/aarch64/a3700_common.c
rename to plat/marvell/armada/a3k/common/aarch64/a3700_common.c
diff --git a/plat/marvell/armada/a3700/common/aarch64/plat_helpers.S b/plat/marvell/armada/a3k/common/aarch64/plat_helpers.S
similarity index 100%
rename from plat/marvell/armada/a3700/common/aarch64/plat_helpers.S
rename to plat/marvell/armada/a3k/common/aarch64/plat_helpers.S
diff --git a/plat/marvell/armada/a3700/common/dram_win.c b/plat/marvell/armada/a3k/common/dram_win.c
similarity index 100%
rename from plat/marvell/armada/a3700/common/dram_win.c
rename to plat/marvell/armada/a3k/common/dram_win.c
diff --git a/plat/marvell/armada/a3700/common/include/a3700_plat_def.h b/plat/marvell/armada/a3k/common/include/a3700_plat_def.h
similarity index 100%
rename from plat/marvell/armada/a3700/common/include/a3700_plat_def.h
rename to plat/marvell/armada/a3k/common/include/a3700_plat_def.h
diff --git a/plat/marvell/armada/a3700/common/include/a3700_pm.h b/plat/marvell/armada/a3k/common/include/a3700_pm.h
similarity index 100%
rename from plat/marvell/armada/a3700/common/include/a3700_pm.h
rename to plat/marvell/armada/a3k/common/include/a3700_pm.h
diff --git a/plat/marvell/armada/a3700/common/include/ddr_info.h b/plat/marvell/armada/a3k/common/include/ddr_info.h
similarity index 100%
rename from plat/marvell/armada/a3700/common/include/ddr_info.h
rename to plat/marvell/armada/a3k/common/include/ddr_info.h
diff --git a/plat/marvell/armada/a3700/common/include/dram_win.h b/plat/marvell/armada/a3k/common/include/dram_win.h
similarity index 100%
rename from plat/marvell/armada/a3700/common/include/dram_win.h
rename to plat/marvell/armada/a3k/common/include/dram_win.h
diff --git a/plat/marvell/armada/a3700/common/include/io_addr_dec.h b/plat/marvell/armada/a3k/common/include/io_addr_dec.h
similarity index 100%
rename from plat/marvell/armada/a3700/common/include/io_addr_dec.h
rename to plat/marvell/armada/a3k/common/include/io_addr_dec.h
diff --git a/plat/marvell/armada/a3700/common/include/plat_macros.S b/plat/marvell/armada/a3k/common/include/plat_macros.S
similarity index 100%
rename from plat/marvell/armada/a3700/common/include/plat_macros.S
rename to plat/marvell/armada/a3k/common/include/plat_macros.S
diff --git a/plat/marvell/armada/a3700/common/include/platform_def.h b/plat/marvell/armada/a3k/common/include/platform_def.h
similarity index 93%
rename from plat/marvell/armada/a3700/common/include/platform_def.h
rename to plat/marvell/armada/a3k/common/include/platform_def.h
index e6660d4..7f8f79a 100644
--- a/plat/marvell/armada/a3700/common/include/platform_def.h
+++ b/plat/marvell/armada/a3k/common/include/platform_def.h
@@ -81,11 +81,11 @@
#define PLAT_MARVELL_CLUSTER_CORE_COUNT U(2)
/* DRAM[2MB..66MB] is used as Trusted ROM */
#define PLAT_MARVELL_TRUSTED_ROM_BASE PLAT_MARVELL_ATF_LOAD_ADDR
-/* 64 MB TODO: reduce this to minimum needed according to fip image size*/
-#define PLAT_MARVELL_TRUSTED_ROM_SIZE 0x04000000
+/* 4 MB for FIP image */
+#define PLAT_MARVELL_TRUSTED_ROM_SIZE 0x00400000
/* Reserve 16M for SCP (Secure PayLoad) Trusted DRAM */
-#define PLAT_MARVELL_TRUSTED_DRAM_BASE 0x04400000
-#define PLAT_MARVELL_TRUSTED_DRAM_SIZE 0x01000000 /* 16 MB */
+#define PLAT_MARVELL_TRUSTED_RAM_BASE 0x04400000
+#define PLAT_MARVELL_TRUSTED_RAM_SIZE 0x01000000 /* 16 MB */
/*
* PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
@@ -169,8 +169,7 @@
#define PLAT_MARVELL_NSTIMER_FRAME_ID 1
/* Mailbox base address */
-#define PLAT_MARVELL_MAILBOX_BASE \
- (MARVELL_TRUSTED_SRAM_BASE + 0x400)
+#define PLAT_MARVELL_MAILBOX_BASE (MARVELL_SHARED_RAM_BASE + 0x400)
#define PLAT_MARVELL_MAILBOX_SIZE 0x100
#define PLAT_MARVELL_MAILBOX_MAGIC_NUM 0x6D72766C /* mrvl */
@@ -221,12 +220,4 @@
/* Securities */
#define IRQ_SEC_OS_TICK_INT MARVELL_IRQ_SEC_PHY_TIMER
-#define TRUSTED_DRAM_BASE PLAT_MARVELL_TRUSTED_DRAM_BASE
-#define TRUSTED_DRAM_SIZE PLAT_MARVELL_TRUSTED_DRAM_SIZE
-
-#ifdef BL32
-#define BL32_BASE TRUSTED_DRAM_BASE
-#define BL32_LIMIT TRUSTED_DRAM_SIZE
-#endif
-
#endif /* PLATFORM_DEF_H */
diff --git a/plat/marvell/armada/a3700/common/io_addr_dec.c b/plat/marvell/armada/a3k/common/io_addr_dec.c
similarity index 100%
rename from plat/marvell/armada/a3700/common/io_addr_dec.c
rename to plat/marvell/armada/a3k/common/io_addr_dec.c
diff --git a/plat/marvell/armada/a3700/common/marvell_plat_config.c b/plat/marvell/armada/a3k/common/marvell_plat_config.c
similarity index 100%
rename from plat/marvell/armada/a3700/common/marvell_plat_config.c
rename to plat/marvell/armada/a3k/common/marvell_plat_config.c
diff --git a/plat/marvell/armada/a3700/common/plat_pm.c b/plat/marvell/armada/a3k/common/plat_pm.c
similarity index 100%
rename from plat/marvell/armada/a3700/common/plat_pm.c
rename to plat/marvell/armada/a3k/common/plat_pm.c
diff --git a/plat/marvell/armada/a8k/a70x0/board/marvell_plat_config.c b/plat/marvell/armada/a8k/a70x0/board/marvell_plat_config.c
index d126f55..7d30ebe 100644
--- a/plat/marvell/armada/a8k/a70x0/board/marvell_plat_config.c
+++ b/plat/marvell/armada/a8k/a70x0/board/marvell_plat_config.c
@@ -102,6 +102,9 @@
#ifdef IMAGE_BLE
{0x00000000f2000000, 0x4000000, IO_0_TID}, /* IO window */
#else
+#if LLC_SRAM
+ {PLAT_MARVELL_LLC_SRAM_BASE, PLAT_MARVELL_LLC_SRAM_SIZE, SRAM_TID},
+#endif
{0x00000000f2000000, 0xe000000, IO_0_TID},
{0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */
{0x0000000800000000, 0x100000000, IO_0_TID}, /* IO window */
diff --git a/plat/marvell/armada/a8k/a70x0_amc/board/marvell_plat_config.c b/plat/marvell/armada/a8k/a70x0_amc/board/marvell_plat_config.c
index f8a1c40..7fc33f1 100644
--- a/plat/marvell/armada/a8k/a70x0_amc/board/marvell_plat_config.c
+++ b/plat/marvell/armada/a8k/a70x0_amc/board/marvell_plat_config.c
@@ -93,6 +93,9 @@
#ifdef IMAGE_BLE
{0x00000000f2000000, 0x4000000, IO_0_TID}, /* IO window */
#else
+#if LLC_SRAM
+ {PLAT_MARVELL_LLC_SRAM_BASE, PLAT_MARVELL_LLC_SRAM_SIZE, SRAM_TID},
+#endif
{0x00000000f2000000, 0xe000000, IO_0_TID},
{0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */
{0x0000000800000000, 0x200000000, IO_0_TID}, /* IO window */
diff --git a/plat/marvell/armada/a8k/a80x0/board/marvell_plat_config.c b/plat/marvell/armada/a8k/a80x0/board/marvell_plat_config.c
index 7901dd2..856c07a 100644
--- a/plat/marvell/armada/a8k/a80x0/board/marvell_plat_config.c
+++ b/plat/marvell/armada/a8k/a80x0/board/marvell_plat_config.c
@@ -131,6 +131,9 @@
#ifdef IMAGE_BLE
{0x00000000f2000000, 0x4000000, IO_0_TID}, /* IO window */
#else
+#if LLC_SRAM
+ {PLAT_MARVELL_LLC_SRAM_BASE, PLAT_MARVELL_LLC_SRAM_SIZE, SRAM_TID},
+#endif
{0x00000000f2000000, 0xe000000, IO_0_TID}, /* IO window */
{0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */
{0x0000000800000000, 0x100000000, IO_0_TID}, /* IO window */
diff --git a/plat/marvell/armada/a8k/a80x0_mcbin/board/marvell_plat_config.c b/plat/marvell/armada/a8k/a80x0_mcbin/board/marvell_plat_config.c
index fa4e144..0edc977 100644
--- a/plat/marvell/armada/a8k/a80x0_mcbin/board/marvell_plat_config.c
+++ b/plat/marvell/armada/a8k/a80x0_mcbin/board/marvell_plat_config.c
@@ -165,6 +165,9 @@
#ifdef IMAGE_BLE
{0x00000000f2000000, 0x4000000, IO_0_TID}, /* IO window */
#else
+#if LLC_SRAM
+ {PLAT_MARVELL_LLC_SRAM_BASE, PLAT_MARVELL_LLC_SRAM_SIZE, SRAM_TID},
+#endif
{0x00000000f2000000, 0xe000000, IO_0_TID}, /* IO window */
{0x00000000c0000000, 0x30000000, IO_0_TID}, /* IO window */
{0x0000000800000000, 0x100000000, IO_0_TID}, /* IO window */
diff --git a/plat/marvell/armada/a8k/common/a8k_common.mk b/plat/marvell/armada/a8k/common/a8k_common.mk
index 8731aa6..dcbf9a6 100644
--- a/plat/marvell/armada/a8k/common/a8k_common.mk
+++ b/plat/marvell/armada/a8k/common/a8k_common.mk
@@ -52,6 +52,7 @@
plat/common/plat_gicv2.c
PLAT_INCLUDES := -I$(BOARD_DIR) \
+ -I$(BOARD_DIR)/board \
-I$(PLAT_COMMON_BASE)/include \
-I$(PLAT_INCLUDE_BASE)/common
diff --git a/plat/marvell/armada/a8k/common/aarch64/a8k_common.c b/plat/marvell/armada/a8k/common/aarch64/a8k_common.c
index 7c2bf31..4332a76 100644
--- a/plat/marvell/armada/a8k/common/aarch64/a8k_common.c
+++ b/plat/marvell/armada/a8k/common/aarch64/a8k_common.c
@@ -18,22 +18,27 @@
*/
#if IMAGE_BL1
const mmap_region_t plat_marvell_mmap[] = {
- MARVELL_MAP_SHARED_RAM,
+ MARVELL_MAP_SECURE_RAM,
MAP_DEVICE0,
{0}
};
#endif
#if IMAGE_BL2
const mmap_region_t plat_marvell_mmap[] = {
- MARVELL_MAP_SHARED_RAM,
+ MARVELL_MAP_SECURE_RAM,
MAP_DEVICE0,
MARVELL_MAP_DRAM,
+#ifdef SPD_opteed
+ MARVELL_MAP_OPTEE_CORE_MEM,
+ MARVELL_OPTEE_PAGEABLE_LOAD_MEM,
+#endif
{0}
};
#endif
#if IMAGE_BL2U
const mmap_region_t plat_marvell_mmap[] = {
+ MARVELL_MAP_SECURE_RAM,
MAP_DEVICE0,
{0}
};
@@ -48,7 +53,7 @@
#if IMAGE_BL31
const mmap_region_t plat_marvell_mmap[] = {
- MARVELL_MAP_SHARED_RAM,
+ MARVELL_MAP_SECURE_RAM,
MAP_DEVICE0,
MARVELL_MAP_DRAM,
{0}
@@ -56,6 +61,7 @@
#endif
#if IMAGE_BL32
const mmap_region_t plat_marvell_mmap[] = {
+ MARVELL_MAP_SECURE_RAM,
MAP_DEVICE0,
{0}
};
diff --git a/plat/marvell/armada/a8k/common/include/platform_def.h b/plat/marvell/armada/a8k/common/include/platform_def.h
index ec1c903..b26e3ea 100644
--- a/plat/marvell/armada/a8k/common/include/platform_def.h
+++ b/plat/marvell/armada/a8k/common/include/platform_def.h
@@ -92,13 +92,16 @@
#define PLAT_MARVELL_CORE_COUNT (PLAT_MARVELL_CLUSTER_COUNT * \
PLAT_MARVELL_CLUSTER_CORE_COUNT)
-/* DRAM[2MB..66MB] is used as Trusted ROM */
+/* Part of DRAM that is used as Trusted ROM */
#define PLAT_MARVELL_TRUSTED_ROM_BASE PLAT_MARVELL_ATF_LOAD_ADDR
-/* 64 MB TODO: reduce this to minimum needed according to fip image size */
-#define PLAT_MARVELL_TRUSTED_ROM_SIZE 0x04000000
-/* Reserve 16M for SCP (Secure PayLoad) Trusted DRAM */
-#define PLAT_MARVELL_TRUSTED_DRAM_BASE 0x04400000
-#define PLAT_MARVELL_TRUSTED_DRAM_SIZE 0x01000000 /* 16 MB */
+/* 4 MB for FIP image */
+#define PLAT_MARVELL_TRUSTED_ROM_SIZE 0x00400000
+/* Reserve 16M for SCP (Secure PayLoad) Trusted RAM */
+#define PLAT_MARVELL_TRUSTED_RAM_BASE 0x04400000
+#define PLAT_MARVELL_TRUSTED_RAM_SIZE 0x01000000 /* 16 MB DRAM */
+
+#define PLAT_MARVELL_LLC_SRAM_BASE PLAT_MARVELL_TRUSTED_RAM_BASE
+#define PLAT_MARVELL_LLC_SRAM_SIZE 0x00100000 /* 1 MB SRAM */
/*
* PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
@@ -182,22 +185,14 @@
/* Mailbox base address (note the lower memory space
* is reserved for BLE data)
*/
-#define PLAT_MARVELL_MAILBOX_BASE (MARVELL_TRUSTED_SRAM_BASE \
- + 0x400)
+#define PLAT_MARVELL_MAILBOX_BASE (MARVELL_SHARED_RAM_BASE \
+ + 0x400)
#define PLAT_MARVELL_MAILBOX_SIZE 0x100
#define PLAT_MARVELL_MAILBOX_MAGIC_NUM 0x6D72766C /* mrvl */
/* Securities */
#define IRQ_SEC_OS_TICK_INT MARVELL_IRQ_SEC_PHY_TIMER
-#define TRUSTED_DRAM_BASE PLAT_MARVELL_TRUSTED_DRAM_BASE
-#define TRUSTED_DRAM_SIZE PLAT_MARVELL_TRUSTED_DRAM_SIZE
-
-#ifdef BL32
-#define BL32_BASE TRUSTED_DRAM_BASE
-#define BL32_LIMIT TRUSTED_DRAM_SIZE
-#endif
-
#define MVEBU_PMU_IRQ_WA
#endif /* PLATFORM_DEF_H */
diff --git a/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c b/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c
index 09b8446..c2cd933 100644
--- a/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c
+++ b/plat/marvell/armada/a8k/common/mss/mss_bl2_setup.c
@@ -10,6 +10,7 @@
#include <common/bl_common.h>
#include <common/debug.h>
#include <drivers/marvell/ccu.h>
+#include <drivers/marvell/mochi/ap_setup.h>
#include <drivers/marvell/mochi/cp110_setup.h>
#include <lib/mmio.h>
@@ -18,9 +19,6 @@
#include "mss_scp_bootloader.h"
-/* IO windows configuration */
-#define IOW_GCR_OFFSET (0x70)
-
/* MSS windows configuration */
#define MSS_AEBR(base) (base + 0x160)
#define MSS_AIBR(base) (base + 0x164)
@@ -51,7 +49,7 @@
*/
static int bl2_plat_mmap_init(void)
{
- int cfg_num, win_id, cfg_idx;
+ int cfg_num, win_id, cfg_idx, cp;
cfg_num = ARRAY_SIZE(ccu_mem_map);
@@ -65,20 +63,29 @@
* Do not touch CCU window 0,
* it's used for the internal registers access
*/
- for (cfg_idx = 0, win_id = 1; cfg_idx < cfg_num; cfg_idx++, win_id++) {
+ for (cfg_idx = 0, win_id = 1;
+ (win_id < MVEBU_CCU_MAX_WINS) && (cfg_idx < cfg_num); win_id++) {
+ /* Skip already enabled CCU windows */
+ if (ccu_is_win_enabled(MVEBU_AP0, win_id))
+ continue;
/* Enable required CCU windows */
ccu_win_check(&ccu_mem_map[cfg_idx]);
ccu_enable_win(MVEBU_AP0, &ccu_mem_map[cfg_idx], win_id);
+ cfg_idx++;
}
- /* Set the default target id to PIDI */
- mmio_write_32(MVEBU_IO_WIN_BASE(MVEBU_AP0) + IOW_GCR_OFFSET, PIDI_TID);
+ /* Config address for each cp other than cp0 */
+ for (cp = 1; cp < CP_COUNT; cp++)
+ update_cp110_default_win(cp);
+
+ /* There is need to configure IO_WIN windows again to overwrite
+ * temporary configuration done during update_cp110_default_win
+ */
+ init_io_win(MVEBU_AP0);
/* Open AMB bridge required for MG access */
- cp110_amb_init(MVEBU_CP_REGS_BASE(0));
-
- if (CP_COUNT == 2)
- cp110_amb_init(MVEBU_CP_REGS_BASE(1));
+ for (cp = 0; cp < CP_COUNT; cp++)
+ cp110_amb_init(MVEBU_CP_REGS_BASE(cp));
return 0;
}
diff --git a/plat/marvell/armada/a8k/common/plat_bl31_setup.c b/plat/marvell/armada/a8k/common/plat_bl31_setup.c
index 621f43c..552c9b2 100644
--- a/plat/marvell/armada/a8k/common/plat_bl31_setup.c
+++ b/plat/marvell/armada/a8k/common/plat_bl31_setup.c
@@ -116,21 +116,12 @@
marvell_bl31_plat_arch_setup();
for (cp = 0; cp < CP_COUNT; cp++) {
- if (cp >= 1)
- update_cp110_default_win(cp);
-
cp110_init(MVEBU_CP_REGS_BASE(cp),
STREAM_ID_BASE + (cp * MAX_STREAM_ID_PER_CP));
marvell_bl31_mpp_init(cp);
}
- /*
- * There is need to configure IO_WIN windows again to overwrite
- * temporary configuration done during update_cp110_default_win
- */
- init_io_win(MVEBU_AP0);
-
for (cp = 1; cp < CP_COUNT; cp++)
mci_link_tune(cp - 1);
diff --git a/plat/marvell/armada/common/aarch64/marvell_helpers.S b/plat/marvell/armada/common/aarch64/marvell_helpers.S
index 6f625b9..4ddc73d 100644
--- a/plat/marvell/armada/common/aarch64/marvell_helpers.S
+++ b/plat/marvell/armada/common/aarch64/marvell_helpers.S
@@ -185,7 +185,7 @@
/* Invalidate all ways */
ldr w1, =LLC_WAY_MASK
- ldr x0, =MASTER_L2X0_INV_WAY
+ ldr x0, =MASTER_LLC_INV_WAY
str w1, [x0]
/* Finally disable LLC */
diff --git a/plat/marvell/armada/common/marvell_common.mk b/plat/marvell/armada/common/marvell_common.mk
index f5f0c41..fcc97ac 100644
--- a/plat/marvell/armada/common/marvell_common.mk
+++ b/plat/marvell/armada/common/marvell_common.mk
@@ -16,8 +16,21 @@
# flag to switch from PLL to ARO
ARO_ENABLE := 0
$(eval $(call add_define,ARO_ENABLE))
+
+# Convert LLC to secure SRAM
+LLC_SRAM := 0
+$(eval $(call add_define,LLC_SRAM))
+
# Enable/Disable LLC
+ifeq (${LLC_SRAM}, 0)
LLC_ENABLE := 1
+else
+# When LLC_SRAM=1, the entire LLC converted to SRAM and enabled at BL1.
+# All existing cases activating LLC at BL31 stage should be disabled.
+# The below assignment does not allow changing the LLC_ENABLE
+# value in the command line.
+LLC_ENABLE = 0
+endif
$(eval $(call add_define,LLC_ENABLE))
include lib/xlat_tables_v2/xlat_tables.mk
