| This configuration is intended as a base image. |
| It includes kernel and firmware support for the common USB WiFi hardware. |
| Packages for WiFi support are up to the user, you'll probably want |
| one or more of: hostapd, iw, wireless_tools and/or wpa_supplicant. |
| |
| It also pulls up the console on the serial port, not on TV output. |
| |
| === Output files after building ============================================== |
| |
| output/images |
| +-- boot.vfat (VFAT kernel partition image generated by genimage) |
| +-- imx23-olinuxino.dtb (device tree blob) |
| +-- rootfs.ext2 (Root file system) |
| +-- sdcard.img (Complete SD card image generated by genimage) |
| +-- u-boot.sd (U-Boot image) |
| +-- uImage (Kernel binary) |
| |
| === Use of generated SD card image =========================================== |
| |
| To determine the device associated to the SD card have a look in the |
| /proc/partitions file: |
| |
| cat /proc/partitions |
| |
| Then, run the following command as root: |
| |
| *** WARNING! The command will destroy all the card content. Use with care! *** |
| |
| sudo dd if=output/images/sdcard.img of=/dev/<your-microsd-device> |
