| OrangePi Plus/Plus2 |
| |
| Intro |
| ===== |
| |
| This default configuration will allow you to start experimenting with the |
| buildroot environment for the OrangePi Plus/Plus2. With the current configuration |
| it will bring-up the board, and allow access through the serial console. |
| |
| How to build it |
| =============== |
| |
| Configure Buildroot: |
| |
| $ make orangepi_plus_defconfig |
| |
| Compile everything and build the SD card image: |
| |
| $ make |
| |
| How to write the SD card |
| ======================== |
| |
| Once the build process is finished you will have an image called "sdcard.img" |
| in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an SD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
