| CircuitCo BeagleBone |
| Texas Instuments AM335x Evaluation Module (TMDXEVM3358) |
| |
| Description |
| =========== |
| |
| This configuration will build a complete image for the beaglebone and |
| the TI AM335x-EVM, the board type is identified by the on-board |
| EEPROM. The configuration is based on the |
| ti-processor-sdk-02.00.00.00. Device tree blobs for beaglebone |
| variants and the evm-sk are built too. |
| |
| For Qt5 support support use the beaglebone_qt5_defconfig. |
| |
| How to build it |
| =============== |
| |
| Select the default configuration for the target: |
| $ make beaglebone_defconfig |
| |
| Optional: modify the configuration: |
| $ make menuconfig |
| |
| Build: |
| $ make |
| |
| Result of the build |
| =================== |
| output/images/ |
| ├── am335x-boneblack.dtb |
| ├── am335x-bone.dtb |
| ├── am335x-evm.dtb |
| ├── am335x-evmsk.dtb |
| ├── boot.vfat |
| ├── MLO |
| ├── rootfs.ext2 |
| ├── rootfs.tar |
| ├── sdcard.img |
| ├── u-boot.img |
| ├── uEnv.txt |
| └── zImage |
| |
| To copy the image file to the sdcard use dd: |
| $ dd if=output/images/sdcard.img of=/dev/XXX |
| |
| Tested hardware |
| =============== |
| am335x-evm (rev. 1.1A) |
| beagleboneblack (rev. A5A) |
| beaglebone (rev. A6) |
| |
| 2016, Lothar Felten <lothar.felten@gmail.com> |
