| ################################################################################ |
| # |
| # util-linux |
| # |
| ################################################################################ |
| |
| UTIL_LINUX_VERSION_MAJOR = 2.32 |
| UTIL_LINUX_VERSION = $(UTIL_LINUX_VERSION_MAJOR).1 |
| UTIL_LINUX_SOURCE = util-linux-$(UTIL_LINUX_VERSION).tar.xz |
| UTIL_LINUX_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/util-linux/v$(UTIL_LINUX_VERSION_MAJOR) |
| |
| # README.licensing claims that some files are GPL-2.0 only, but this is not true. |
| # Some files are GPL-3.0+ but only in tests. rfkill uses an ISC-style license. |
| UTIL_LINUX_LICENSE = GPL-2.0+, BSD-4-Clause, LGPL-2.1+ (libblkid, libfdisk, libmount), BSD-3-Clause (libuuid) ISC (rfkill) |
| UTIL_LINUX_LICENSE_FILES = README.licensing Documentation/licenses/COPYING.GPLv2 Documentation/licenses/COPYING.UCB Documentation/licenses/COPYING.LGPLv2.1 Documentation/licenses/COPYING.BSD-3 Documentation/licenses/COPYING.ISC |
| UTIL_LINUX_INSTALL_STAGING = YES |
| UTIL_LINUX_DEPENDENCIES = host-pkgconf $(TARGET_NLS_DEPENDENCIES) |
| UTIL_LINUX_CONF_OPTS += \ |
| --disable-rpath \ |
| --disable-makeinstall-chown |
| UTIL_LINUX_LIBS = $(TARGET_NLS_LIBS) |
| |
| # system depends on util-linux so we enable systemd support |
| # (which needs systemd to be installed) |
| UTIL_LINUX_CONF_OPTS += \ |
| --without-systemd \ |
| --with-systemdsystemunitdir=no |
| |
| HOST_UTIL_LINUX_DEPENDENCIES = host-pkgconf |
| |
| # We also don't want the host-python dependency |
| HOST_UTIL_LINUX_CONF_OPTS = --without-python |
| |
| # Prevent the installation from attempting to move shared libraries from |
| # ${usrlib_execdir} (/usr/lib) to ${libdir} (/lib), since both paths are |
| # the same when merged usr is in use. |
| ifeq ($(BR2_ROOTFS_MERGED_USR),y) |
| UTIL_LINUX_CONF_OPTS += --bindir=/usr/bin --sbindir=/usr/sbin --libdir=/usr/lib |
| endif |
| |
| ifeq ($(BR2_PACKAGE_NCURSES),y) |
| UTIL_LINUX_DEPENDENCIES += ncurses |
| ifeq ($(BR2_PACKAGE_NCURSES_WCHAR),y) |
| UTIL_LINUX_CONF_OPTS += --with-ncursesw |
| UTIL_LINUX_CONF_ENV += NCURSESW6_CONFIG=$(STAGING_DIR)/usr/bin/$(NCURSES_CONFIG_SCRIPTS) |
| else |
| UTIL_LINUX_CONF_OPTS += --without-ncursesw --with-ncurses --disable-widechar |
| UTIL_LINUX_CONF_ENV += NCURSES6_CONFIG=$(STAGING_DIR)/usr/bin/$(NCURSES_CONFIG_SCRIPTS) |
| endif |
| else |
| ifeq ($(BR2_USE_WCHAR),y) |
| UTIL_LINUX_CONF_OPTS += --enable-widechar |
| else |
| UTIL_LINUX_CONF_OPTS += --disable-widechar |
| endif |
| UTIL_LINUX_CONF_OPTS += --without-ncursesw --without-ncurses |
| endif |
| |
| ifeq ($(BR2_PACKAGE_LIBCAP_NG),y) |
| UTIL_LINUX_DEPENDENCIES += libcap-ng |
| endif |
| |
| # Unfortunately, the util-linux does LIBS="" at the end of its |
| # configure script. So we have to pass the proper LIBS value when |
| # calling the configure script to make configure tests pass properly, |
| # and then pass it again at build time. |
| UTIL_LINUX_CONF_ENV += LIBS="$(UTIL_LINUX_LIBS)" |
| UTIL_LINUX_MAKE_OPTS += LIBS="$(UTIL_LINUX_LIBS)" |
| |
| ifeq ($(BR2_PACKAGE_LIBSELINUX),y) |
| UTIL_LINUX_DEPENDENCIES += libselinux |
| UTIL_LINUX_CONF_OPTS += --with-selinux |
| define UTIL_LINUX_SELINUX_PAMFILES_TWEAK |
| $(foreach f,su su-l, |
| $(SED) 's/^# \(.*pam_selinux.so.*\)$$/\1/' \ |
| $(TARGET_DIR)/etc/pam.d/$(f) |
| ) |
| endef |
| else |
| UTIL_LINUX_CONF_OPTS += --without-selinux |
| endif |
| |
| # Used by cramfs utils |
| UTIL_LINUX_DEPENDENCIES += $(if $(BR2_PACKAGE_ZLIB),zlib) |
| |
| # Used by login-utils |
| UTIL_LINUX_DEPENDENCIES += $(if $(BR2_PACKAGE_LINUX_PAM),linux-pam) |
| |
| # Disable/Enable utilities |
| UTIL_LINUX_CONF_OPTS += \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_BINARIES),--enable-all-programs,--disable-all-programs) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_AGETTY),--enable-agetty,--disable-agetty) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_BFS),--enable-bfs,--disable-bfs) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_CAL),--enable-cal,--disable-cal) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_CHFN_CHSH),--enable-chfn-chsh,--disable-chfn-chsh) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_CHMEM),--enable-chmem,--disable-chmem) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_CRAMFS),--enable-cramfs,--disable-cramfs) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_EJECT),--enable-eject,--disable-eject) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_FALLOCATE),--enable-fallocate,--disable-fallocate) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_FDFORMAT),--enable-fdformat,--disable-fdformat) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_FSCK),--enable-fsck,--disable-fsck) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_HWCLOCK),--enable-hwclock,--disable-hwclock) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_IPCRM),--enable-ipcrm,--disable-ipcrm) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_IPCS),--enable-ipcs,--disable-ipcs) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_KILL),--enable-kill,--disable-kill) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_LAST),--enable-last,--disable-last) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_LIBBLKID),--enable-libblkid,--disable-libblkid) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_LIBFDISK),--enable-libfdisk,--disable-libfdisk) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_LIBMOUNT),--enable-libmount,--disable-libmount) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_LIBSMARTCOLS),--enable-libsmartcols,--disable-libsmartcols) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_LIBUUID),--enable-libuuid,--disable-libuuid) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_LINE),--enable-line,--disable-line) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_LOGGER),--enable-logger,--disable-logger) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_LOGIN),--enable-login,--disable-login) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_LOSETUP),--enable-losetup,--disable-losetup) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_LSLOGINS),--enable-lslogins,--disable-lslogins) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_LSMEM),--enable-lsmem,--disable-lsmem) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_MESG),--enable-mesg,--disable-mesg) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_MINIX),--enable-minix,--disable-minix) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_MORE),--enable-more,--disable-more) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_MOUNT),--enable-mount,--disable-mount) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_MOUNTPOINT),--enable-mountpoint,--disable-mountpoint) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_NEWGRP),--enable-newgrp,--disable-newgrp) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_NOLOGIN),--enable-nologin,--disable-nologin) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_NSENTER),--enable-nsenter,--disable-nsenter) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_PARTX),--enable-partx,--disable-partx) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_PG),--enable-pg,--disable-pg) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT),--enable-pivot_root,--disable-pivot_root) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_RAW),--enable-raw,--disable-raw) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_RENAME),--enable-rename,--disable-rename) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_RFKILL),--enable-rfkill,--disable-rfkill) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_RUNUSER),--enable-runuser,--disable-runuser) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS),--enable-schedutils,--disable-schedutils) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_SETPRIV),--enable-setpriv,--disable-setpriv) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_SETTERM),--enable-setterm,--disable-setterm) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_SU),--enable-su,--disable-su) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_SULOGIN),--enable-sulogin,--disable-sulogin) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT),--enable-switch_root,--disable-switch_root) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_TUNELP),--enable-tunelp,--disable-tunelp) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_UL),--enable-ul,--disable-ul) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_UNSHARE),--enable-unshare,--disable-unshare) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_UTMPDUMP),--enable-utmpdump,--disable-utmpdump) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_UUIDD),--enable-uuidd,--disable-uuidd) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_VIPW),--enable-vipw,--disable-vipw) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_WALL),--enable-wall,--disable-wall) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_WDCTL),--enable-wdctl,--disable-wdctl) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_WRITE),--enable-write,--disable-write) \ |
| $(if $(BR2_PACKAGE_UTIL_LINUX_ZRAMCTL),--enable-zramctl,--disable-zramctl) |
| |
| # In the host version of util-linux, we only require libuuid and |
| # libmount (plus libblkid as an indirect dependency of libmount). |
| # So disable all of the programs, unless BR2_PACKAGE_HOST_UTIL_LINUX is set |
| |
| HOST_UTIL_LINUX_CONF_OPTS += \ |
| --enable-libblkid \ |
| --enable-libmount \ |
| --enable-libuuid \ |
| --without-ncurses \ |
| --without-ncursesw \ |
| --without-tinfo |
| |
| ifeq ($(BR2_PACKAGE_HOST_UTIL_LINUX),y) |
| HOST_UTIL_LINUX_CONF_OPTS += --disable-makeinstall-chown |
| # disable commands that have ncurses dependency, as well as |
| # other ones that are useless on the host |
| HOST_UTIL_LINUX_CONF_OPTS += \ |
| --disable-agetty \ |
| --disable-chfn-chsh \ |
| --disable-chmem \ |
| --disable-login \ |
| --disable-lslogins \ |
| --disable-mesg \ |
| --disable-more \ |
| --disable-newgrp \ |
| --disable-nologin \ |
| --disable-nsenter \ |
| --disable-pg \ |
| --disable-rfkill \ |
| --disable-schedutils \ |
| --disable-setpriv \ |
| --disable-setterm \ |
| --disable-su \ |
| --disable-sulogin \ |
| --disable-tunelp \ |
| --disable-ul \ |
| --disable-unshare \ |
| --disable-uuidd \ |
| --disable-vipw \ |
| --disable-wall \ |
| --disable-wdctl \ |
| --disable-write \ |
| --disable-zramctl |
| # Used by cramfs utils |
| HOST_UTIL_LINUX_DEPENDENCIES += host-zlib |
| else |
| HOST_UTIL_LINUX_CONF_OPTS += --disable-all-programs |
| endif |
| |
| # Install libmount Python bindings |
| ifeq ($(BR2_PACKAGE_PYTHON)$(BR2_PACKAGE_PYTHON3),y) |
| UTIL_LINUX_CONF_OPTS += --with-python |
| UTIL_LINUX_DEPENDENCIES += $(if $(BR2_PACKAGE_PYTHON),python,python3) |
| ifeq ($(BR2_PACKAGE_UTIL_LINUX_LIBMOUNT),y) |
| UTIL_LINUX_CONF_OPTS += --enable-pylibmount |
| else |
| UTIL_LINUX_CONF_OPTS += --disable-pylibmount |
| endif |
| else |
| UTIL_LINUX_CONF_OPTS += --without-python |
| endif |
| |
| ifeq ($(BR2_PACKAGE_READLINE),y) |
| UTIL_LINUX_CONF_OPTS += --with-readline |
| UTIL_LINUX_LIBS += $(if $(BR2_STATIC_LIBS),-lcurses) |
| UTIL_LINUX_DEPENDENCIES += readline |
| else |
| UTIL_LINUX_CONF_OPTS += --without-readline |
| endif |
| |
| ifeq ($(BR2_PACKAGE_AUDIT),y) |
| UTIL_LINUX_CONF_OPTS += --with-audit |
| UTIL_LINUX_DEPENDENCIES += audit |
| else |
| UTIL_LINUX_CONF_OPTS += --without-audit |
| endif |
| |
| # Install PAM configuration files |
| ifeq ($(BR2_PACKAGE_UTIL_LINUX_SU)$(BR2_PACKAGE_LINUX_PAM),yy) |
| define UTIL_LINUX_INSTALL_PAMFILES |
| $(INSTALL) -m 0644 package/util-linux/su.pam \ |
| $(TARGET_DIR)/etc/pam.d/su |
| $(INSTALL) -m 0644 package/util-linux/su.pam \ |
| $(TARGET_DIR)/etc/pam.d/su-l |
| $(UTIL_LINUX_SELINUX_PAMFILES_TWEAK) |
| endef |
| UTIL_LINUX_POST_INSTALL_TARGET_HOOKS += UTIL_LINUX_INSTALL_PAMFILES |
| endif |
| |
| # Install agetty->getty symlink to avoid breakage when there's no busybox |
| ifeq ($(BR2_PACKAGE_UTIL_LINUX_AGETTY),y) |
| ifeq ($(BR2_PACKAGE_BUSYBOX),) |
| define UTIL_LINUX_GETTY_SYMLINK |
| ln -sf agetty $(TARGET_DIR)/sbin/getty |
| endef |
| endif |
| endif |
| |
| UTIL_LINUX_POST_INSTALL_TARGET_HOOKS += UTIL_LINUX_GETTY_SYMLINK |
| |
| $(eval $(autotools-package)) |
| $(eval $(host-autotools-package)) |
