| OSD32MP1-BRK |
| |
| Intro |
| ===== |
| |
| This configuration supports the OSD32MP1-BRK platform: |
| |
| https://octavosystems.com/octavo_products/osd32mp1-brk/ |
| |
| How to build |
| ============ |
| |
| $ make octavo_osd32mp1_brk_defconfig |
| $ make |
| |
| How to write the microSD card |
| ============================= |
| |
| Once the build process is finished you will have an image called |
| "sdcard.img" in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an microSD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Boot the board |
| ============== |
| |
| (1) Insert the microSD card. |
| |
| (2) Plug an USB-SERIAL cable on the RX, TX and GND pins |
| |
| (3) Plug a micro-USB cable to power-up the board. |
| |
| (4) The system will start, with the console on UART. |
