| BR2_arm=y |
| BR2_cortex_a7=y |
| BR2_ARM_EABIHF=y |
| BR2_ARM_FPU_NEON_VFPV4=y |
| |
| # patches |
| BR2_GLOBAL_PATCH_DIR="board/raspberrypi/patches" |
| BR2_DOWNLOAD_FORCE_CHECK_HASHES=y |
| |
| BR2_SYSTEM_DHCP="eth0" |
| |
| # Linux headers same as kernel, a 6.6 series |
| BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_6=y |
| |
| BR2_TOOLCHAIN_BUILDROOT_CXX=y |
| |
| BR2_LINUX_KERNEL=y |
| BR2_LINUX_KERNEL_CUSTOM_TARBALL=y |
| BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,576cc10e1ed50a9eacffc7a05c796051d7343ea4)/linux-576cc10e1ed50a9eacffc7a05c796051d7343ea4.tar.gz" |
| BR2_LINUX_KERNEL_DEFCONFIG="bcm2709" |
| BR2_LINUX_KERNEL_DTS_SUPPORT=y |
| BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2709-rpi-2-b broadcom/bcm2710-rpi-2-b" |
| |
| BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y |
| |
| BR2_PACKAGE_RPI_FIRMWARE=y |
| BR2_PACKAGE_RPI_FIRMWARE_BOOTCODE_BIN=y |
| BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI=y |
| BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi/config_default.txt" |
| # BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set |
| |
| # Required tools to create the SD image |
| BR2_PACKAGE_HOST_DOSFSTOOLS=y |
| BR2_PACKAGE_HOST_GENIMAGE=y |
| BR2_PACKAGE_HOST_MTOOLS=y |
| |
| # Filesystem / image |
| BR2_TARGET_ROOTFS_EXT2=y |
| BR2_TARGET_ROOTFS_EXT2_4=y |
| BR2_TARGET_ROOTFS_EXT2_SIZE="120M" |
| # BR2_TARGET_ROOTFS_TAR is not set |
| BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi2/post-build.sh" |
| BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi2/post-image.sh" |
| |
| # Enable compressed kernel module support |
| BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y |
| BR2_PACKAGE_KMOD_TOOLS=y |
| BR2_PACKAGE_XZ=y |
| BR2_PACKAGE_KMOD=y |
| BR2_PACKAGE_HOST_KMOD_XZ=y |
