| # @_flash.bin | bootloader |
| # @_image [_flash.bin] | image burn to nand, default is the same as bootloader |
| # @_filesystem | filesystem to burn |
| # @_kernel | kernel image |
| # @_dtb | dtb image |
| |
| # This command will be run when i.MX6/7 i.MX8MM, i.MX8MQ |
| SDP: boot -f _flash.bin |
| |
| # These commands will be run when use SPL and will be skipped if no spl |
| # SDPU will be deprecated. please use SDPV instead of SDPU |
| # { |
| SDPU: delay 1000 |
| SDPU: write -f _flash.bin -offset 0x57c00 |
| SDPU: jump |
| # } |
| |
| # These commands will be run when use SPL and will be skipped if no spl |
| # if (SPL support SDPV) |
| # { |
| SDPV: delay 1000 |
| SDPV: write -f _flash.bin -offset 0x11000 |
| SDPV: jump |
| # } |
| |
| FB: ucmd setenv fastboot_buffer ${loadaddr} |
| FB[-t 60000]: ucmd nand erase.chip |
| FB[-t 60000]: ucmd ubi part rootfs |
| FB[-t 60000]: ucmd ubi create root - |
| FB: download -f _filesystem |
| FB[-t 60000]: ucmd ubi write ${loadaddr} root ${filesize} |
| |
| FB: download -f _kernel |
| FB[-t 60000]: ucmd nand write ${loadaddr} kernel ${filesize} |
| |
| FB: download -f _dtb |
| FB[-t 8000]: ucmd nand write ${loadaddr} nanddtb ${filesize} |
| FB: ucmd setenv loadaddr 0x82000000 |
| |
| FB: done |
