| # Architecture |
| BR2_arm=y |
| BR2_cortex_a5=y |
| BR2_ARM_ENABLE_VFP=y |
| BR2_ARM_INSTRUCTIONS_THUMB2=y |
| |
| # Toolchain |
| BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y |
| # Needed for some packages |
| BR2_TOOLCHAIN_BUILDROOT_WCHAR=y |
| # Needed for gdb |
| BR2_PTHREAD_DEBUG=y |
| # Needed for some packages |
| BR2_TOOLCHAIN_BUILDROOT_CXX=y |
| |
| # System Configuration |
| # Needed for usb-utils |
| BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y |
| # Creation of the SD card image |
| BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" |
| BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/atmel/sama5d3_xplained_mmc/genimage.cfg" |
| |
| # Kernel |
| BR2_LINUX_KERNEL=y |
| BR2_LINUX_KERNEL_CUSTOM_TARBALL=y |
| BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux4sam,linux-at91,linux4sam_5.8)/linux-linux4sam_5.8.tar.gz" |
| BR2_LINUX_KERNEL_DEFCONFIG="sama5" |
| BR2_LINUX_KERNEL_DTS_SUPPORT=y |
| BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d3_xplained at91-sama5d3_xplained_pda4 at91-sama5d3_xplained_pda7 at91-sama5d3_xplained_pda7b" |
| |
| # Packages |
| BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y |
| BR2_PACKAGE_ALSA_UTILS=y |
| BR2_PACKAGE_ALSA_UTILS_ALSACONF=y |
| BR2_PACKAGE_ALSA_UTILS_APLAY=y |
| BR2_PACKAGE_FFMPEG=y |
| BR2_PACKAGE_FFMPEG_GPL=y |
| BR2_PACKAGE_FFMPEG_SWSCALE=y |
| BR2_PACKAGE_MPG123=y |
| BR2_PACKAGE_BZIP2=y |
| BR2_PACKAGE_GZIP=y |
| BR2_PACKAGE_UNZIP=y |
| BR2_PACKAGE_XZ=y |
| BR2_PACKAGE_ZIP=y |
| BR2_PACKAGE_GDB=y |
| BR2_PACKAGE_LMBENCH=y |
| BR2_PACKAGE_DOSFSTOOLS=y |
| BR2_PACKAGE_DOSFSTOOLS_FATLABEL=y |
| BR2_PACKAGE_DOSFSTOOLS_FSCK_FAT=y |
| BR2_PACKAGE_DOSFSTOOLS_MKFS_FAT=y |
| BR2_PACKAGE_MMC_UTILS=y |
| BR2_PACKAGE_MTD=y |
| BR2_PACKAGE_WILC1000_FIRMWARE=y |
| BR2_PACKAGE_DEVMEM2=y |
| BR2_PACKAGE_EVTEST=y |
| BR2_PACKAGE_I2C_TOOLS=y |
| BR2_PACKAGE_SETSERIAL=y |
| BR2_PACKAGE_SPI_TOOLS=y |
| BR2_PACKAGE_USBUTILS=y |
| BR2_PACKAGE_LIBDRM=y |
| BR2_PACKAGE_LIBDRM_INSTALL_TESTS=y |
| BR2_PACKAGE_DTC=y |
| BR2_PACKAGE_DTC_PROGRAMS=y |
| BR2_PACKAGE_BLUEZ_UTILS=y |
| BR2_PACKAGE_BRIDGE_UTILS=y |
| BR2_PACKAGE_CAN_UTILS=y |
| BR2_PACKAGE_DROPBEAR=y |
| BR2_PACKAGE_ETHTOOL=y |
| BR2_PACKAGE_IPERF=y |
| BR2_PACKAGE_IPROUTE2=y |
| BR2_PACKAGE_IPTABLES=y |
| BR2_PACKAGE_IW=y |
| BR2_PACKAGE_LRZSZ=y |
| BR2_PACKAGE_MII_DIAG=y |
| BR2_PACKAGE_OPENSSH=y |
| BR2_PACKAGE_WGET=y |
| BR2_PACKAGE_WIRELESS_TOOLS=y |
| BR2_PACKAGE_WPA_SUPPLICANT=y |
| BR2_PACKAGE_BASH=y |
| BR2_PACKAGE_HTOP=y |
| BR2_PACKAGE_VIM=y |
| |
| # Filesystem |
| BR2_TARGET_ROOTFS_EXT2=y |
| BR2_TARGET_ROOTFS_EXT2_4=y |
| |
| # Bootloaders |
| BR2_TARGET_AT91BOOTSTRAP3=y |
| BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y |
| BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" |
| BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.10" |
| BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d3_xplainedsd_uboot" |
| BR2_TARGET_UBOOT=y |
| BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y |
| BR2_TARGET_UBOOT_CUSTOM_GIT=y |
| BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git" |
| BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.8" |
| BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d3_xplained_mmc" |
| BR2_TARGET_UBOOT_NEEDS_DTC=y |
| |
| # Host packages |
| # Needed to generate the SD card image |
| BR2_PACKAGE_HOST_DOSFSTOOLS=y |
| BR2_PACKAGE_HOST_GENIMAGE=y |
| BR2_PACKAGE_HOST_MTOOLS=y |
