| 2020.11-rc2, released November 14th, 2020 |
| |
| Fixes all over the tree. |
| |
| cve-checker script dropped. Instead the pkg-stats logic has |
| been extended to be able to only generate stats for the |
| configured packages using 'make pkg-stats' |
| |
| Removed defconfigs: rock64 |
| |
| Updated/fixed packages: apparmor, asterisk, bitcoin, busybox, |
| cups-filters, cryptsetup, davfs2, domoticz, elf2flt, freetype, |
| ghostscript, glmark2, go, gst1-plugins-bad, guile, jsoncpp, |
| libcap, libexif, libnetfilter_conntrack, libpam-tacplus, |
| libsigrokdecode, linux-backports, linux-firmware, mesa3d, |
| modem-manager, mp4v2, oniguruma, openntpd, python3, |
| python-lmdb, python-m2crypto, rauc, s390-tools, slirp, |
| stress-ng, suricata, systemd, tcpdump, tmux, tor, webkitgtk, |
| wireguard-linux-compat, wpewebkit, xen |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #13281: Raspberry Pi 2: overlays folder missing in genimage-ra.. |
| #13291: BR2_DL_DIR is ignored when creating defconfig |
| #13306: wpewebkit build problem in 2020-11-rc1 |
| |
| 2020.11-rc1, released November 4th, 2020 |
| |
| Fixes all over the tree and new features. |
| |
| Architectures: Support for IBM s390x |
| |
| Toolchain: use Secure-PLT rather than BSS-PLT for PowerPC |
| 32. Binutils 2.35.1 added, now defaulting to 2.34. ARC |
| 2020.09-release toolchain. GCC 7.x dropped. RISC-V support for |
| uclibc-ng. Support for Bootlin external toolchains. |
| |
| SELinux support improvements: File security contexts are now |
| set when the file systems are created, so there is no need to |
| run restorecon on first boot / read only rootfs is supported. |
| An optimized / stripped refpolicy SELinux policy is now |
| used. Packages can enable additional refpolicy modules using |
| <pkg>_SELINUX_MODULES. |
| |
| support/scripts/cve-checker: Utility script to check for known |
| CVEs in just the packages enabled in a Buildroot configuration |
| rather than all packages, by passing the output of 'make |
| show-info' to it. |
| |
| Go: Modules handling. The module name must be specified using |
| <pkg>_GOMOD. |
| |
| BR2_EXTERNAL: Support for defining skeleton and init system |
| packages in external trees. |
| |
| meson: Correct SDK cross-compilation.conf file when |
| per-package builds were used to build SDK. |
| |
| systemd: Use /run rather than /var/run for PID files in units. |
| |
| Fakeroot scripts (BR2_ROOTFS_POST_FAKEROOT_SCRIPT) are now run |
| after all finalization hooks (including pre-rootfs) to ensure |
| they can override any late configuration done by packages. |
| |
| support/script/pycompile: Rework logic to ensure .pyc files |
| contain absolute target paths, fixing code inspection at |
| runtime when executed with cwd != '/'. |
| |
| support/scripts/setlocalversion: Correct Mercurial output to |
| match behaviour with Git. |
| |
| support/scripts/apply-patches.sh: Use patch |
| --no-backup-if-mismatch, so we no longer blindly have to |
| remove *.orig files after patching, fixing issues with |
| packages containing such files. |
| |
| New defconfigs: Acer chromebook elm, Friendlyarm nanopc-t4 and |
| nanopi-m4, Hardkernel odroid-c2, Kontron SMARC-sAL28, NXP |
| imx8mqevk, Orangepi RK3399 and zero+, PCengines APU2, Pine64 |
| rockpro64, QEMU s390x, Raxda rockpi-n8, |
| |
| New packages: altera-stapl, asn1c, babeltrace2, cukinia, |
| easyframes, environment-setup, frr, graphicsmagick, htpdate, |
| ipcalc, libbacktrace, libblockdev, libbytesize, librelp, |
| libuev, makedumpfile, meson-tools, mg, mrp, multipath-tools, |
| netcalc, odroidc2-firmware, php-xdebug, python-aiofiles, |
| python-ansicolors, python-boto3, python-botocore, |
| python-bsdiff4, python-crayons, python-iniconfig, |
| python-intelhex, python-ipdb, python-jmespath, |
| python-m2crypto, python-opcua-asyncio, python-packaging, |
| python-piexif, python-pluggy, python-pytest, |
| python-s3transfer, python-xmodem, qprint, qt5lottie, |
| qt5remoteobjects, re2, redir, s390-tools, sentry-cli, |
| sentry-native, timescaledb, tinyhttpd, uhd, uredir, watchdog, |
| wayland-utils, weston-imx |
| |
| Removed packages: amd-catalyst, bellagio, gqview, libcroco, |
| nvidia-tegra23, opencv |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11811: lsblk (util-linux) should depend on libudev if available |
| #11931: Bugs in support/scripts/apply-patches.sh |
| #12301: systemd-journal-gatewayd: config options broken |
| #12911: usb_modeswitch installation race condition |
| #13236: Can't compile linux 5.4.8 (with gcc 10 on host) |
| #13286: The system hangs in vmware workstation on the line.. |
| |
| 2020.08.2, released November 16th, 2020 |
| |
| Important / security related fixes. |
| |
| Toolchain-wrapper: Pass -fno-tree-loop-distribute-patterns to |
| fix kernel build on microblaze with gcc 10.x when |
| optimizations are enabled. |
| |
| Updated/fixed packages: apparmor, argp-standalone, asterisk, |
| bandwidthd, binutils, bitcoin, busybox, collectd, cryptsetup, |
| cups-filters, darkhttpd, davfs2, docker-cli, |
| docker-containerd, docker-engine, dovecot-pigeonhole, |
| dvb-apps, elf2flt, fastd, fbset, fbtft, freetype, gcc, |
| ghostscript, grpc, gst1-plugins-bad, jsoncpp, |
| kernel-module-imx-gpu-viv, keepalived, kmscube, libass, |
| libexif, libiqrf, libnetfilter_conntrack, libpam-tacplus, |
| libraw, linux-backports, linux-firmware, lzlib, mp4v2, |
| netsnmp, nginx, numactl, oniguruma, opencv3, openntpd, |
| patchelf, php, pistache, postgresql, python-pyqt5, qemu, |
| qt5base, rauc, redis, samba4, slirp, systemd, tcpdump, |
| tinyproxy, tmux, tor, waf, webkitgtk, wine, |
| wireguard-linux-compat, wireshark, wpewebkit, xen, xorriso, |
| xvisor, zeromq, zxing-cpp |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11931: Bugs in support/scripts/apply-patches.sh |
| |
| 2020.08.1, released October 12th, 2020 |
| |
| Important / security related fixes. |
| |
| Fixes for various compilation issues with GCC 10.x. |
| |
| meson: Correct SDK cross-compilation.conf file when |
| per-package builds were used to build SDK. |
| |
| systemd: Use /run rather than /var/run for PID files in units. |
| |
| Toolchain: use Secure-PLT rather than BSS-PLT for PowerPC 32. |
| |
| Fakeroot scripts (BR2_ROOTFS_POST_FAKEROOT_SCRIPT) are now run |
| after all finalization hooks (including pre-rootfs) to ensure |
| they can override any late configuration done by packages. |
| |
| support/script/pycompile: Rework logic to ensure .pyc files |
| contain absolute target paths, fixing code inspection at |
| runtime when executed with cwd != '/'. |
| |
| support/scripts/setlocalversion: Correct Mercurial output to |
| match behaviour with Git. |
| |
| support/scripts/apply-patches.sh: Use patch |
| --no-backup-if-mismatch, so we no longer blindly have to |
| remove *.orig files after patching, fixing issues with |
| packages containing such files. |
| |
| fs/jffs2: Now correctly handles xattrs |
| |
| Updated/fixed packages: acpica, afboot-stm32, alsa-utils, |
| apparmor, bandwidthd, barebox, bash, bison, brotli, |
| cifs-utils, cups, dhcpcd, dhcpdump, docker-cli, docker-engine, |
| ecryptfs-utils, efl, fail2ban, fbterm, ffmpeg, fontconfig, |
| freetype, gcc, gdb, ghostscript, gnupg2, gnutls, go, gqview, |
| gst1-plugins-base, gst1-plugins-ugly, ipmitool, jbig2dec, |
| kexec, lcdproc, libcamera, libhtp, libnetconf2, libraw, |
| libssh, libxml2, libxml-parser-perl, libzip, linux-headers, |
| live555, localedef, ltp-testsuite, lua, matchbox, memcached, |
| memtester, mesa3d, meson, minidlna, mongodb, mongrel2, motion, |
| mraa, mtd, musepack, neardal, netatalk, netperf, netsniff-ng, |
| nginx, nodejs, nss-pam-ldapd, open-plc-utils, openswan, |
| opentyrian, openvmtools, php, postgresql, python, |
| python-aenum, python-cycler, python-engineio, python-fire, |
| python-pymodbus, python-scapy, python-semver, |
| python-sentry-sdk, python-socketio, python-texttable, |
| python-tinyrpc, python-txtorcon, python3, qt5base, quagga, |
| read-edid, redis, rsh-redone, runc, samba4, socketcand, |
| strace, supertux, suricata, systemd, ti-utils, trinity, |
| uclibc, usb_modeswitch, vlc, vsftpd, wampcc, |
| wayland-protocols, wireguard-linux-compat, wireshark, wlroots, |
| wolfssl, w_scan, xerces, xfsprogs, xdriver-xf86-video-ati, |
| xserver_xorg-server, ympd, zeromq, zlib-ng, zstd |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12911: usb_modeswitch installation race condition |
| #13236: Can't compile linux 5.4.8 (with gcc 10 on host) |
| |
| 2020.08, released September 1st, 2020 |
| |
| Various fixes. |
| |
| Updated/fixed packages: am33x-cm3, avahi, bluez-tools, |
| busybox, chocolate-doom, collectd, dhcp, docker-cli, domoticz, |
| gobject-introspection, graphite2, haproxy, ibm-sw-tpm2, |
| imagemagick, libeXosip2, libressl, lxc, mbedtls, menu-cache, |
| mongodb, mosquitto, nvidia-driver, paho-mqtt-c, pixz, |
| postgresql, python-django, rtty, squid, stress-ng, systemd, |
| trousers, uclibc, wireshark, wolfssl, zbar |
| |
| 2020.08-rc3, released August 28th, 2020 |
| |
| Fixes all over the tree. |
| |
| Infrastructure: Ensure RPATH entries that may be needed for |
| dlopen() are not dropped by patchelf. |
| |
| Toolchain: Drop old GCC 6 based external Sourcery AMD64 |
| toolchain. |
| |
| Updated/fixed packages: assimp, davfs2, dillo, glibc, |
| gnuradio, hostapd, ibm-sw-tpm2, ipmitool, json-c, libroxml, |
| linux, mender, netopeer2, openal, openjpeg, python-matplotlib, |
| ripgrep, shadowsocks-libev, trousers, xlib_libX11, |
| xserver_xorg-server |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #13141: Target-finalize fail with "depmod: ERROR: Bad version passed" |
| |
| 2020.08-rc2, released August 24th, 2020 |
| |
| Fixes all over the tree, including a number of fixes for |
| compilation with GCC-10. |
| |
| Toolchain: Disallow building uClibc-ng for RISC-V 64-bit, |
| because of issues with a missing __riscv_flush_icache() |
| implementation. |
| |
| Defconfigs: CI20: Use mainline Linux and U-boot. Update |
| Microchip sama5d27_wlsom1_ek_mmc_dev to use bluez5-utils |
| instead of (the removed) legacy bluez-utils |
| |
| Updated/fixed packages: 18xx-ti-utils, aircrack-ng, apache, |
| atest, bandwidthd, bellagio, bind, bird, bluez-alsa, boost, |
| c-periphery, capnproto, chrony, collectd, cpio, cvs, |
| dieharder, domoticz, dovecot, dovecot-pigeonhole, drbd-utils, |
| dump1090, efl, elixir, f2fs-tools, feh, fluidsynth, fping, |
| gdbm, gdk-pixbuf, ghostscript, gst1-plugins-bad, |
| gstreamer1-editing-services, htop, ibm-sw-tpm2, ifplugd, |
| iftop, igd2-for-linux, ima-evm-utils, iprutils, iputils, |
| keepalived, kmsxx, libabseil-cpp, libcamera, libcurl, |
| libfuse3, libnss, librtlsdr, libubox, libunwind, live555, |
| lttng-tools, luabitop, mender-artifact, minizip, |
| mjpg-streamer, mpd, mpv, mtd, ncftp, open-lldp, openal, |
| opencv, opencv3, openfpgaloader, optee-os, owfs, php, |
| pistache, prosody, pulseview, python-decorator, |
| python-gunicorn, python-rpi-gpio, python-spidev, |
| python3-decorator, python3-mako, python3-pyselftools, qt5, |
| qt5webengine, rauc, redis, ripgrep, rtl8188eu, rtl8821au, |
| setools, smstools3, supertux, tftpd, tpm2-abrmd, |
| wpa_supplicant, xen, xlib_libX11, xserver_xorg-server |
| |
| New packages: python3-cython, python3-pycryptodomex |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12876: nodejs fails to build when host-icu has been built before |
| #13111: python-gunicorn: missing dependency on python-setuptools |
| #13121: wpa_supplicant fails to build without libopenssl enabled |
| #13146: raspberrypi3_defconfig: "Inappropriate ioctl for device".. |
| #13156: package live555 new license |
| #13166: python-rpi-gpio: does not work against aarch64, unint.. |
| |
| 2020.08-rc1, released August 6th, 2020 |
| |
| Toolchain: |
| |
| - GCC 10.x added, GCC 9.x is the default |
| - binutils 2.34 added, binutils 2.33 is the default, binutils |
| 2.31 removed |
| - glibc updated to 2.31 |
| - ARC toolchain components updated to 2020.03-release. |
| - Enable uClibc-ng usage for RISC-V 64-bit |
| |
| Infrastructure: |
| |
| - qmake-package was fixed to be compatible with |
| BR2_PER_PACKAGE_DIRECTORIES |
| - complete rewrite of the Gitlab CI Yaml configuration file, |
| now generated directly by the Gitlab CI pipeline itselfs |
| |
| Misc: |
| |
| - cargo and cargo-bin packages removed, as cargo is now part |
| of Rust itself |
| |
| Filesystem: ubinize configuration files can now use |
| BINARIES_DIR to refer to the $(O)/images directory. |
| |
| New packages: bitwise, earlyoom, fuse-overlayfs, gloox, |
| kodi-pvr-octonet, kodi-pvr-zattoo, libabseil-cpp, libcutl, |
| libnids, libnpupnp, libodb, libodb-boost, libodb-mysql, |
| libodb-pgsql, mbpfan, netopeer2, odb, parprouted, |
| python-colorzero, python-gpiozero, python-pybind, python-yatl, |
| python3-decorator, qt5quicktimeline, resiprocate, ttyd, |
| unclutter-xfixes, urandom-scripts, |
| |
| New defconfigs: bananapi_m2_zero, freescale_imx8mnevk, |
| globalscale_espressobin, imx6ullevk, |
| microchip_sama5d27_wlsom1_ek, rock_pi_4, rock_pi_n10 |
| |
| Removed packages: cargo, cargo-bin, |
| kodi-peripheral-steamcontroller |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12941: Python GObject fails to build when using BR2_PER_PACKAGE_DIRECTORIES |
| #12946: Grub: Decompressor is too big. |
| #12986: Mtools: Error converting to codepage 850 |
| #13001: openjdk-bin replaces libfreetype.so from host-freetype |
| #13011: Incorrect selection of gcc version |
| #13021: Minor code error when building granite-0.4.1 |
| #13026: rpi-firmware: must not rename start files |
| #13046: Optimize for fast -Ofast is not compliant |
| #13081: host-e2fsprogs attempts to create udev rules.d on build host if not exists |
| #13101: BR audit2allow support |
| |
| 2020.05.3, released October 12th, 2020 |
| |
| Important / security related fixes. |
| |
| meson: Correct SDK cross-compilation.conf file when |
| per-package builds were used to build SDK. |
| |
| systemd: Use /run rather than /var/run for PID files in units. |
| |
| Toolchain: use Secure-PLT rather than BSS-PLT for PowerPC 32. |
| |
| Fakeroot scripts (BR2_ROOTFS_POST_FAKEROOT_SCRIPT) are now run |
| after all finalization hooks (including pre-rootfs) to ensure |
| they can override any late configuration done by packages. |
| |
| support/script/pycompile: Rework logic to ensure .pyc files |
| contain absolute target paths, fixing code inspection at |
| runtime when executed with cwd != '/'. |
| |
| support/scripts/setlocalversion: Correct Mercurial output to |
| match behaviour with Git. |
| |
| support/scripts/apply-patches.sh: Use patch |
| --no-backup-if-mismatch, so we no longer blindly have to |
| remove *.orig files after patching, fixing issues with |
| packages containing such files. |
| |
| Updated/fixed packages: alsa-utils, apparmor, avahi, |
| bandwidthd, barebox, bash, bison, brotli, busybox, cifs-utils, |
| cryptsetup, cups, dhcpcd, dhcpdump, docker-cli, docker-engine, |
| ecryptfs-utils, efl, fail2ban, freetype, gcc, gdb, |
| ghostscript, gnutls, go, graphite2, gst1-plugins-base, |
| gst1-plugins-ugly, imagemagick, ipmitool, jbig2dec, libhtp, |
| libraw, libssh, libxml2, libxml-parser-perl, linux-headers, |
| localedef, lua, mbedtls, memcached, mesa3d, meson, minidlna, |
| mongodb, nginx, nodejs, nss-pam-ldapd, openvmtools, |
| paho-mqtt-c, php, postgresql, python, python-aenum, |
| python-django, python-engineio, python-fire, python-pymodbus, |
| python-scapy, python-semver, python-sentry-sdk, |
| python-socketio, python-texttable, python-tinyrpc, |
| python-txtorcon, python3, qt5base, rsh-redone, runc, samba4, |
| strace, supertux, suricata, systemd, uclibc, usb_modeswitch, |
| vlc, vsftpd, wayland-protocols, wireguard-linux-compat, |
| wireshark, wlroots, wolfssl, xserver_xorg-server, ympd, |
| zeromq, zstd |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12911: usb_modeswitch installation race condition |
| #13251: cryptsetup does not work on branch 2020.02 following.. |
| |
| 2020.05.2, released August 29th, 2020 |
| |
| Important / security related fixes. |
| |
| Infrastructure: Ensure RPATH entries that may be needed for |
| dlopen() are not dropped by patchelf. |
| |
| BR_VERSION_FULL/setlocalversion (used by make print-version |
| and /etc/os-release): Properly handle local git tags |
| |
| Updated/fixed packages: apache, assimp, at91bootstrap3, bind, |
| boost, busybox, capnproto, cegui, chrony, collectd, cpio, |
| cryptsetup, cups, cvs, dbus, docker-engine, domoticz, dovecot, |
| dovecot-pigeonhole, dropbear, efl, elixir, f2fs-tools, ffmpeg, |
| gd, gdk-pixbuf, ghostscript, glibc, gnuradio, grub2, |
| gst1-plugins-bad, gstreamer1-editing-services, hostapd, |
| ibm-sw-tpm2, iputils, jasper, json-c, libcurl, libressl, |
| libwebsockets, linux, live555, mesa3d, mongodb, mosquitto, |
| mpv, nodejs, opencv, opencv3, openfpgaloader, openjpeg, |
| patchelf, perl, php, postgresql, prosody, python-django, |
| python-gunicorn, python-matplotlib, ripgrep, rtl8188eu, |
| rtl8821au, ruby, shadowsocks-libev, squid, systemd, |
| tpm2-abrmd, tpm2-tools, trousers, uboot, webkitgtk, wireshark, |
| wolfssl, wpa_supplicant, wpewebkit, xen, xlib_libX11, |
| xserver_xorg-server |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12876: nodejs fails to build when host-icu has been built before |
| #13111: python-gunicorn: missing dependency on python-setuptools |
| #13121: wpa_supplicant fails to build without libopenssl enabled |
| #13141: Target-finalize fail with "depmod: ERROR: Bad version passed" |
| #13156: package live555 new license |
| |
| 2020.05.1, released July 25th, 2020 |
| |
| Important / security related fixes. |
| |
| Toolchain: |
| - Make external toolchain version check also work for |
| toolchains configured with --with-gcc-major-version-only |
| |
| - Do not handle SOURCE_DATE_EPOCH in toolchain wrapper if the |
| compiler supports it, fixing an issue with precompiled |
| headers |
| |
| - Ensure debug libs from external toolchains are not installed |
| into target if debugging is disabled |
| |
| Download: |
| - Correct reproducibility issue in handling of git submodules |
| for older git versions. |
| |
| - Fix file locking over NFS |
| |
| fs: Ensure cpio archive element order is reproducible |
| |
| Br2-external: Fix error reporting for invalid br2-external trees |
| |
| Per-package: |
| - Fix an issue with python3 sysconfig data not getting |
| correctly expanded |
| |
| - Fix per-package building for packages using the qmake |
| infrastructure |
| |
| Updated/fixed packages: a10disp, asterisk, bind, brltty, |
| cdrkit, clamav, cryptodev-linux, dbus, docker-cli, |
| docker-engine, dvb-apps, e2fsprogs, exim, exiv2, freerdp, gdb, |
| gdk-pixbuf, gerbera, gnutls, go, granite, grub2, gssdp, |
| gst1-plugins-good, gst1-plugins-ugly, gupnp, intel-microcode, |
| iproute2, irrlicht, iwd, jq, kodi, libcamera, libcec, |
| libconfuse, libcurl, libevdev, libhttpserver, libmicrohttpd, |
| libnss, libressl, libvncserver, libxml2, libxmlrpc, lxc, |
| mbedtls, mediastreamer, mesa3d, meson, minizip, mongodb, |
| mtools, mutt, nano, network-manager, nghttp2, ngircd, nodejs, |
| ntp, open-plc-utils, open2300, openjdk-bin, openssh, |
| oracle-mysql, paho-mqtt-c, pango, php, poco, prosody, putty, |
| python-greenlet, python-urllib3, python-validators, python3, |
| readline, redis, rpi-firmware, rtl8821au, samba4, sdl2, |
| sqlite, squid, strace, sunxi-mali-mainline-driver, syslog-ng, |
| systemd, tcpreplay, tinydtls, upmpdcli, upx, vlc, webkitgtk, |
| wireguard-linux-compat, wireshark, wpebackend-fdo, wpewebkit, |
| x11vnc, znc, zstd |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12941: Python GObject fails to build when using BR2_PER_PACKAGE_.. |
| #12946: Grub: Decompressor is too big. |
| #12986: Mtools: Error converting to codepage 850 |
| #13001: openjdk-bin replaces libfreetype.so from host-freetype |
| #13011: Incorrect selection of gcc version |
| #13021: Minor code error when building granite-0.4.1 |
| #13026: rpi-firmware: must not rename start files |
| #13031: nodejs: RangeError at new ArrayBuffer() |
| #13046: Optimize for fast -Ofast is not compliant |
| |
| 2020.05, released June 1st, 2020 |
| |
| Various fixes. |
| |
| Updated/fixed packages: arm-trusted-firmware, gcc, mp4v2, fmc, |
| fmlib, glib-networking, libusb-compat, linux, qt5webengine, |
| sysrepo, wampcc, xen |
| |
| 2020.05-rc3, released May 29th, 2020 |
| |
| Fixes all over the tree. |
| |
| Infrastructure: Support checking download hashes for packages |
| coming from Subversion. |
| |
| Defconfigs: Increase boot partition size to 64MB for Freescale |
| boards to allow space for bigger kernels. |
| |
| Updated/fixed packages: audit, bind, dovecot, efl, erlang, |
| ffmpeg, fio, gerbera, gnupg, leveldb, lrzip, ltrace, matio, |
| mesa3d, mp4v2, prosody, qemu, qt5declarative, speexdsp, |
| systemd, tremor, uboot-tools, unbound, wireshark |
| |
| Removed packages: wiringpi |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12361: Init system (systemd) kills login on Raspberry Pi Zero |
| #12686: recipe for target 'install_dev' failed (libcrypto.so..) |
| |
| 2020.05-rc2, released May 22nd 2020 |
| |
| Fixes all over the tree. |
| |
| U-Boot: Support building with Python 3.x instead of Python |
| 2.x. Since U-Boot 2020.01, various U-Boot build scripts use |
| Python 3.x instead of Python 2.x, so add an option to pull in |
| host-python3 rather than host-python. Also fix a number of |
| defconfigs to use this new option. |
| |
| Updated/fixed packages: apparmor, binutils, bison, brltty, |
| c-icap, cegui, checkpolicy, clamav, crda, cvs, docker-cli, |
| docker-engine, domoticz, elf2flt, exfatprogs, fakeroot, |
| ffmpeg, freerdp, gcc, glibc, gnuconfig, irrlicht, kmod, |
| libexif, libpam-tacplus, libssh2, libv4l, libvncserver, |
| localedef, lrzip, mariadb, matchbox, mbuffer, mesa3d, |
| mesa3d-headers, meson, netsniff-ng, openldap, openocd, |
| optee-os, p7zip, paho-mqtt-c, php, piglit, pigz, |
| python-argon2-cffi, python-attrs, python-future, |
| python-markdown, python-pycryptodomex, python-pyqt5, qt5base, |
| rpi-firmware, rustc, squashfs, squid, stella, suricata, |
| systemd, uacme, uclibc, util-linux, vboot-utils |
| |
| New packages: python3-pyelftools |
| |
| Removed packages: ezxml, mtdev2tuio, python-pycrypto |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10551: PowerPC SPE and Musl |
| #12256: package tar is outdated (1.29 is 3 years old) |
| #12271: python-iptables runtime dependencies |
| #12321: host-generic-package: PKG_DL_OPTS not used for host package |
| #12391: CMake-based host package fails to include output/host/include |
| #12431: ethernet no detected on nanopi neo 2 |
| #12521: RISCV RV32IA selected, RV64GC output |
| #12586: avahi failure |
| #12596: host-e2fsprogs: tune2fs incompatibility on older glibc.. |
| #12611: ntp hash is not matching with upstream 4.2.8p13 |
| #12626: PHP missing header files within 2020.02 |
| #12631: glibc support Power-PC SPE |
| #12656: bison fails to relocate with relocate-sdk.sh |
| #12661: cups problems in buildroot |
| #12686: recipe for target 'install_dev' failed (libcrypto.so:.. |
| #12691: host-rust build fails |
| #12761: Buildroot fails when building GCNano binaries for the STM.. |
| #12786: Systemd spawns two getty processes when the getty port.. |
| #12806: There are multiple issues in buildroot that faults cups.. |
| #12826: nodejs-12.16.1: error: 'uv_sleep' was not declared in.. |
| #12831: RPI-firmware package: DTB-overlay dependency |
| #12836: libunwind: package does not show up in menuconfig for.. |
| #12841: util-linux/sfdisk 2.35.1 fails on sector-size header |
| #12866: should we be disabling bash executable path caching? |
| #12886: GMP built in wrong order (?) |
| #12891: QEMU, libvirt-bin, qemu-kvm Package Support required |
| #12901: GStreamer doesn't build on 2020-05 rc1 with GObject.. |
| #12906: qt PrefixPath is wrong on 2020.05-rc1 |
| #12921: nodejs-12.16.1: error: overriding 'virtual icu_65::.. |
| |
| 2020.05-rc1, released May 7th 2020 |
| |
| Addition of support for gobject-introspection: both the |
| gobject-introspection package itself, but also introspection |
| support was enabled in a number of other packages. |
| |
| Support for Qt 5.6 was dropped as its support was dropped |
| upstream, only one version of Qt is supported at the moment: |
| Qt 5.14.2. |
| |
| Addition of support for the apparmor Linux security module, by |
| adding the necessary user-space packages. |
| |
| Addition of a qmake package infrastructure, now used by most |
| Qt-related packages. |
| |
| The Luarocks package infrastructure has been extended to |
| support build host packages. |
| |
| The package infrastructure was improved to allow each package |
| to indicate the Linux kernel configuration options it needs. |
| |
| Addition of support for generating filesystem images using the |
| EROFS filesystem. |
| |
| The logic that calculates the list of files installed by each |
| package was reworked to be compatible with the top-level |
| parallel build functionality. |
| |
| Addition of a package for a pre-compiled ARM32 bare-metal |
| toolchain, which can be used to build ARM32 code in ARM64 |
| configurations, such as firmware/bootloader code. |
| |
| The Qemu defconfigs are now boot-tested in Qemu as part of the |
| Gitlab continuous integration. |
| |
| Toolchain: gcc 9.x bumped to 9.3.0, gcc 8.x bumped to 8.4.0, |
| gdb bumped to 8.3.1. |
| |
| New packages: apcupsd, apparmor, arm-gnu-a-toolchain, bearssl, |
| belle-sip, belr, cage, chartjs, erofs-utils, exfatprogs, |
| gobject-introspection, ibm-sw-tpm2, imx-seco, jbig2dec, |
| libapparmor, libiberty, libfuse3, libtextstyle, libudfread, |
| libuhttpd, libuwsc, lua-lyaml, matio, mbuffer, netdata, |
| openfpgaloader, perl-i18n, perl-locale-maketext-lexicon, |
| perl-lwp-protocol-https, |
| perl-mojolicious-plugin-authorization, |
| perl-mojolicious-plugin-cspheader, |
| perl-mojolicious-plugin-i18n, |
| perl-mojolicious-plugin-securityheader, perl-mozilla-ca, |
| perl-path-class, pistache, pkcs11-helper, prelink-cross, |
| python-argon2-cffi, python-canopen, python-cbor2, |
| python-filelock, python-flatbuffers, python-greenlet, |
| python-modbus-tk, python-pyalsa, python-pysftp, python-regex, |
| python-snappy, rtty, tinyproxy, udev-gentoo-scripts, unbound, |
| vuejs, wlroots. |
| |
| New defconfigs: freescale_imx6ullevk, freescale_imx8qmmek, |
| nanopi_neo4, nanopi_r1, nitrogen8mm, nitrogen8mn, olpc_xo1, |
| olpc_xo175, roc_rk3399_pc, stm32mp157a_dk1, zynq_qmtech |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10386: Add an option to put all compiled executables that |
| show up on target/ in staging/ as well |
| #11866: iniramfs file system fails to boot using Grub on EFI x86_64 |
| #12666: Doesn't pick up a custom bash profile |
| #12696: Uboot 2020.01 Problem loading Linux kernel on Nano PI NEO |
| #12701: [patch] wpa_supplicant must depend on openssl |
| #12711: host-localedef 2.30-20 fails to compile on fedora 32 (gcc 10.0.1) |
| #12716: bio.h not found |
| #12726: systemctl preset-all failed for ctrl-alt-del.target |
| #12731: rtl8188eu not buildung for banana pi M1 (glib, systemd, 4.18.12) |
| #12746: "sysdig" package description points to |
| http://sysdig.org, which bounces to malware site |
| #12751: OpenJdk package installation issues on target |
| #12796: Update OpenSSL to Version 1.1.1g to patch CVE-2020-1967 |
| #12811: bootstrap stuck and no login prompt |
| |
| 2020.02.8, released November 16th, 2020 |
| |
| Important / security related fixes. |
| |
| Updated/fixed packages: angularjs, argp-standalone, asterisk, |
| bandwidthd, bitcoin, busybox, cryptsetup, darkhttpd, davfs2, |
| docker-cli, docker-containerd, docker-engine, |
| dovecot-pigeonhole, fastd, fbset, fbtft, freetype, gcc, |
| ghostscript, gnuradio, grpc, gst1-plugins-bad, jsoncpp, |
| keepalived, libass, libexif, libiqrf, libpam-tacplus, libraw, |
| linux-backports, linux-firmware, lzlib, netsnmp, nginx, |
| oniguruma, opencv3, openntpd, patchelf, php, postgresql, |
| python-pyqt5, qt5base, rauc, redis, samba4, slirp, systemd, |
| tcpdump, tmux, tor, webkitgtk, wireguard-linux-compat, |
| wireshark, wpewebkit, xen, xorriso, zeromq, zxing-cpp |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11931: Bugs in support/scripts/apply-patches.sh |
| |
| 2020.02.7, released October 12th, 2020 |
| |
| Important / security related fixes. |
| |
| meson: Correct SDK cross-compilation.conf file when |
| per-package builds were used to build SDK. |
| |
| systemd: Use /run rather than /var/run for PID files in units. |
| |
| Toolchain: use Secure-PLT rather than BSS-PLT for PowerPC 32. |
| |
| support/script/pycompile: Rework logic to ensure .pyc files |
| contain absolute target paths, fixing code inspection at |
| runtime when executed with cwd != '/'. |
| |
| support/scripts/setlocalversion: Correct Mercurial output to |
| match behaviour with Git. |
| |
| support/scripts/apply-patches.sh: Use patch |
| --no-backup-if-mismatch, so we no longer blindly have to |
| remove *.orig files after patching, fixing issues with |
| packages containing such files. |
| |
| Updated/fixed packages: bandwidthd, barebox, bash, bison, |
| brotli, cifs-utils, cryptsetup, dhcpcd, dhcpdump, docker-cli, |
| docker-engine, ecryptfs-utils, efl, fail2ban, freetype, gcc, |
| gdb, ghostscript, gnutls, go, gst1-plugins-base, |
| gst1-plugins-ugly, ipmitool, libhtp, libraw, libssh, libxml2, |
| libxml-parser-perl, localedef, lua, memcached, mesa3d, meson, |
| minidlna, nginx, nodejs, nss-pam-ldapd, openvmtools, php, |
| postgresql, python, python-aenum, python-autobahn, |
| python-engineio, python-fire, python-pymodbus, python-scapy, |
| python-semver, python-sentry-sdk, python-socketio, |
| python-texttable, python-tinyrpc, python-txtorcon, python3, |
| qt5base, runc, samba4, strace, supertux, suricata, systemd, |
| vlc, wayland-protocols, wireguard-linux-compat, wireshark, |
| xserver_xorg-server, zeromq, zstd |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12911: usb_modeswitch installation race condition |
| #13251: cryptsetup does not work on branch 2020.02 following.. |
| |
| 2020.02.6, released September 5th, 2020 |
| |
| Important / security related fixes. |
| |
| Fix a 2020.02.5 build regression in busybox when systemd (and |
| not less) are enabled because of missing infrastructure. |
| |
| Updated/fixed packages: alsa-utils, avahi, busybox, cups, |
| docker-cli, graphite2, imagemagick, libeXosip2, mbedtls, |
| nvidia-driver, paho-mqtt-c, python-django, systemd, uclibc, |
| usb_modeswitch, wolfssl |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12911: usb_modeswitch installation race condition |
| |
| 2020.02.5, released August 29th, 2020 |
| |
| Important / security related fixes. |
| |
| Infrastructure: Ensure RPATH entries that may be needed for |
| dlopen() are not dropped by patchelf. |
| |
| BR_VERSION_FULL/setlocalversion (used by make print-version |
| and /etc/os-release): Properly handle local git tags |
| |
| Updated/fixed packages: apache, at91bootstrap3, bind, boost, |
| busybox, capnproto, chrony, collectd, cpio, cryptsetup, cups, |
| cvs, dbus, docker-engine, domoticz, dovecot, |
| dovecot-pigeonhole, dropbear, efl, elixir, f2fs-tools, ffmpeg, |
| gd, gdk-pixbuf, ghostscript, glibc, grub2, gst1-plugins-bad, |
| hostapd, iputils, jasper, json-c, libcurl, libwebsockets, |
| linux, live555, mesa3d, mosquitto, mpv, nodejs, opencv, |
| opencv3, openjpeg, patchelf, perl, php, postgresql, |
| python-django, python-gunicorn, python-matplotlib, ripgrep, |
| rtl8188eu, rtl8821au, ruby, shadowsocks-libev, squid, |
| tpm2-abrmd, tpm2-tools, trousers, uacme, webkitgtk, wireshark, |
| wolfssl, wpa_supplicant, wpewebkit, xen, xlib_libX11, |
| xserver_xorg-server |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12876: nodejs fails to build when host-icu has been built before |
| #13111: python-gunicorn: missing dependency on python-setuptools |
| #13121: wpa_supplicant fails to build without libopenssl enabled |
| #13141: Target-finalize fail with "depmod: ERROR: Bad version passed" |
| #13156: package live555 new license |
| |
| 2020.02.4, released July 26th, 2020 |
| |
| Important / security related fixes. |
| |
| Toolchain: |
| - Make external toolchain version check also work for |
| toolchains configured with --with-gcc-major-version-only |
| |
| - Do not handle SOURCE_DATE_EPOCH in toolchain wrapper if the |
| compiler supports it, fixing an issue with precompiled |
| headers |
| |
| - Ensure debug libs from external toolchains are not installed |
| into target if debugging is disabled |
| |
| Download: |
| - Correct reproducibility issue in handling of git submodules |
| for older git versions. |
| |
| - Fix file locking over NFS |
| |
| fs: Ensure cpio archive element order is reproducible |
| |
| Br2-external: Fix error reporting for invalid br2-external trees |
| |
| Per-package: |
| - Fix an issue with python3 sysconfig data not getting |
| correctly expanded |
| |
| - Fix per-package building for packages using the qmake |
| infrastructure |
| |
| Updated/fixed packages: a10disp, asterisk, bind, cdrkit, |
| checkpolicy, clamav, dbus, docker-cli, docker-engine, |
| dvb-apps, e2fsprogs, exim, exiv2, freerdp, gnutls, go, grub2, |
| gssdp, gst1-plugins-good, gst1-plugins-ugly, gupnp, |
| intel-microcode, iproute2, irrlicht, iwd, jq, kodi, libcamera, |
| libconfuse, libcurl, libglib2, libhttpserver, libmicrohttpd, |
| libopenssl, libvncserver, libxml2, libxmlrpc, lxc, mbedtls, |
| mesa3d, meson, mongodb, mtools, mutt, nghttp2, ngircd, nodejs, |
| ntp, open-plc-utils, open2300, openjdk-bin, openssh, |
| oracle-mysql, paho-mqtt-c, pcre, php, poco, prosody, putty, |
| python-twisted, python-urllib3, python-validators, python3, |
| qt5xmlpatterns, redis, rpi-firmware, rtl8821au, samba4, sdl2, |
| sqlite, squid, syslog-ng, systemd, tcpreplay, tinydtls, |
| upmpdcli, upx, vlc, webkitgtk, wireguard-linux-compat, |
| wireshark, wpebackend-fdo, wpewebkit, zstd |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12941: Python GObject fails to build when using BR2_PER_PACKAGE_.. |
| #12946: Grub: Decompressor is too big. |
| #12986: Mtools: Error converting to codepage 850 |
| #13001: openjdk-bin replaces libfreetype.so from host-freetype |
| #13011: Incorrect selection of gcc version |
| #13026: rpi-firmware: must not rename start files |
| #13031: nodejs: RangeError at new ArrayBuffer() |
| #13046: Optimize for fast -Ofast is not compliant |
| |
| 2020.02.3, released June 3rd, 2020 |
| |
| Important / security related fixes. |
| |
| Fix various build issues of host packages on hosts using GCC |
| 10. |
| |
| Updated/fixed packages: arm-trusted-firmware, audit, bind, |
| binutils, bison, clamav, crda, dovecot, dtc, efl, elf2flt, |
| erlang, fakeroot, ffmpeg, fmc, fmlib, freerdp, gcc, git, |
| glib-networking, gnupg, leveldb, libexif, libssh2, |
| libusb-compat, linux-headers, lrzip, ltrace, mariadb, mesa3d, |
| mp4v2, openldap, openocd, perl, php, prosody, |
| python-pycryptodomex, python-pyqt5, qemu, rpi-firmware, rustc, |
| speexdsp, sysrepo, systemd, tremor, vboot-utils, wireshark, |
| xen |
| |
| Removed packages: python-pycrypto |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12361: Init system (systemd) kills login on Raspberry Pi Zero |
| #12656: bison fails to relocate with relocate-sdk.sh |
| #12671: leveldb won't detect that snappy is present (static.. |
| #12691: host-rust build fails |
| #12831: RPI-firmware package: DTB-overlay dependency |
| |
| 2020.02.2, released May 12th, 2020 |
| |
| Important / security related fixes. |
| |
| Musl: Disallow on PPC64 cores without AltiVec support |
| (E.G. e5500). |
| |
| fs/cpio: Correctly handle booting with 'console=' |
| |
| release: Ensure temporary .br2-external.* files are not |
| included in the release tarball |
| |
| Defconfigs: Fix various mistyped config options, or config |
| options where the dependencies were no longer met. |
| |
| Updated/fixed packages: apache, azure-iot-sdk-c, binutils, |
| boinc, c-ares, cvs, docker-cli, docker-containerd, |
| docker-engine, domoticz, e2fsprogs, efl, evtest, exim, ffmpeg, |
| freerdp, gcc, gflags, glibc, gnuconfig, haproxy, imx-gpu-2d, |
| irrlicht, jpeg kodi-pvr-vuplus, libarchive, libcoap, |
| libfpm-extra, libglib2, libhtp, libid3tag, libinput, libmad, |
| libopenssl, libsepol, libssh, libv4l, libvncserver, libwpe, |
| localedef, mariadb, matchbox, mbedtls, mc, mesa3d-headers, |
| meson, midori, msgpack, netsnmp, nginx, ogre, openjdk, |
| openldap, openvpn, p7zip, paho-mqtt-c, php, polkit, python, |
| python-attrs, python-crossbar, python-dpkt, python-flask, |
| python-future, python-iptables, python-jedi, python-markdown2, |
| python3, qemu, qpdf, qt5, samba4, squashfs, squid, strongswan, |
| suricata, tzdata, util-linux, vlc, wget, webkitgtk, |
| wireguard-linux-compat, wireshark, wpebackend-fdo, wpewebkit, |
| zic |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11866: initramfs file system fails to boot using Grub on EFI x86_64 |
| #12271: python-iptables runtime dependencies |
| #12726: systemctl preset-all failed for ctrl-alt-del.target |
| #12751: OpenJdk package installation issues on target |
| #12796: Update OpenSSL to Version 1.1.1g to patch CVE-2020-1967 |
| #12811: bootstrap stuck and no login prompt |
| #12841: util-linux/sfdisk 2.35.1 fails on sector-size header |
| |
| 2020.02.1, released April 10th, 2020 |
| |
| Important / security related fixes. |
| |
| core: Also fixup /lib references in libtool .la files, similar |
| to how it is done for /usr/*. |
| |
| Various fixes for builds with per-package target/host |
| directories. |
| |
| toolchain: Fix kernel headers validation check for external |
| toolchains. Fix make 4.3+ compatibility in external toolchain |
| logic. |
| |
| fs/initramfs: fix show-info so it also shows the usual |
| rootfs-related variables. |
| |
| Updated/fixed packages: arm-trusted-firmware, barebox-aux, |
| bluez5_utils, bubblewrap, busybox, civetweb, cog, collectd, |
| ffmpeg, gcc, gnutls, gssdp, gvfs, haproxy, hiredis, hostapd, |
| kmscube, kodi-screensaver-rsxs, libical, libinput, libexif, |
| libopenssl, libsndfile, linux, linux-tools, llvm, localedef, |
| mcrypt, mesa3d, meson, monit, nftables, ntp, opencv3, |
| oprofile, php, pinentry, polkit, pure-ftpd, python-pyyaml, |
| qt5, quagga, radvd, rcw, redis, rocksdb, samba4, screen, |
| sdbusplus, swupdate, sysdig, sysklogd, syslinux, syslog-ng, |
| tor, tslib, uacme, util-linux, vala, vlc, |
| wireguard-linux-compat, wireguard-tools, wireshark, |
| wpa_supplicant, xserver_xorg-server |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12711: host-localedef 2.30-20 fails to compile on fedora 32 |
| #12746: "sysdig" package description points to http://sysdig.org, .. |
| |
| 2020.02, released March 8th, 2020 |
| |
| Various fixes. |
| |
| br2-external: Fix compatibility with make 4.3+ |
| |
| Updated/fixed packages: bash, bcm2835, binutils, cups, |
| erlang-p1-acme, fbgrab, gr-osmosdr, gst1-plugins-base, |
| gst1-validate, gstreamer1, guile, jhead, libdrm, libevdev, |
| libinput, libnss, libsndfile, libvncserver, linux-firmware, |
| mesa3d, nodejs, openjdk-bin, openvmtools, optee-test, patch, |
| php, piglit, pppd, python-django, qemu, qt5base, ruby, |
| ser2net, swupdate, thrift, zziplib |
| |
| Removed packages: classpath, jamvm |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12606: fbgrab location has changed |
| |
| 2020.02-rc3, released March 2nd, 2020 |
| |
| Fixes all over the tree. |
| |
| Infrastructure: Rework file list handling to fix race |
| conditions when building with per-package target and host |
| directories and top-level parallel builds. |
| |
| Updated/fixed packages: aufs, binutils, blktrace, brltty, |
| cairo, dnsmasq, docker-compose, elf2flt, exim, exiv2, git, |
| kodi-inputstream-adaptive, libarchive, libcgroup, libgdiplus, |
| libssh2, libvncserver, libvorbis, linknx, linux-firmware, lxc, |
| lz4, mosquitto, openjpeg, openrc, poco, proftpd, pure-ftpd, |
| python3, python-multidict, python-setuptools-scm-git-archive, |
| qpdf, qt5tools, rdesktop, rocksdb, shellinabox, squid, |
| suricata, swig, systemd, taglib, util-linux, wireshark, zsh |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12571: ltp-testsuite : Build failure |
| #12576: 2020.02-RC1: error while loading shared libraries: ... |
| #12581: 2020.02-rc1 glibc failing to build on fedora 31 |
| |
| 2020.02-rc2, released February 26th, 2020 |
| |
| Fixes all over the tree. |
| |
| Toolchain: Ensure strong SSP can only be enabled if the |
| (external) toolchain supports it. |
| |
| Fix a race condition related to creating the output/staging |
| symlink on systems with coreutils < 8.27. |
| |
| Drop support for the (end of life) Qt 5.6 variant. |
| |
| Updated/fixed packages: at, armadillo, audiofile, bash, |
| busybox, erlang, fail2ban, fluidsynth, ipsec-tools, jpeg-turbo, |
| kvm-unit-tests, libftdi1, libinput, libsvgtiny, libtomcrypt, |
| libupnpp, libxml2, linux-tools, luv, mbedtls, mesa3d, minicom, |
| openvmtools, php, qt5, qt5webengine, qwt, radvd, rcw, |
| sdbusplus, systemd, tpm2-tss, vorbis-tools |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12581: 2020.02-rc1 glibc failing to build on fedora 31 |
| |
| 2020.02-rc1, released February 18th, 2020 |
| |
| Fixes all over the tree and new features. |
| |
| Add experimental support for building with a per-package |
| target and host directory. This still has some rough edges, |
| but brings a number of advantages: |
| |
| - Packages will only be able to access the explicitly listed |
| dependencies and not any other packages that happen to be |
| built before, ensuring correct dependency information in |
| Buildroot. |
| |
| - Possibility for top-level parallel builds, speeding up |
| builds on multicore machines. |
| |
| Core: Ensure package-file-lists data is correct after |
| incremental builds as well. |
| |
| Architecture: Add support for ARC-HS38 with 64bit multiplier |
| variant, allow building glibc for big endian ARC, handle 16KB |
| MMU page size for ARC in toolchain wrapper. |
| |
| Toolchain: Add binutils 2.33.1, GCC 7.5.0, Arm 9.2-2019.12 |
| toolchains, ARC 2019.09 toolchain. Allow using custom kernel |
| headers newer than what is known by Buildroot. |
| |
| pkg-stats: Support for CVE vulnerability reporting by |
| comparing to NVD database. |
| |
| Reproducible builds: The go -trimpath option is now used to |
| get rid of absolute build paths, __FILE__ and __BASE_FILE__ |
| defines are now handled in the toolchain wrapper. |
| |
| Systemd: Build host variant and use systemctl to automatically |
| enable unit files rather than manually managing symlinks. |
| |
| Util-linux: Ensure that hwclock is built without GPLv3 |
| code. Notice that builds with hwclock has contained |
| GPLv3-licensed code since util-linux 2.30 (Buildroot 2017.08+) |
| |
| New defconfigs: Beelink GS1, Raspberrypi4 64bit |
| |
| New packages: alura, avro-c, bubblewrap, cctz, cereal, |
| cpuburn-arm, elixir, erlang-base64url, erlang-idna, |
| erlang-jose, erlang-p1-acme, erlang-p1-mqtree, |
| erlang-p1-yconf, fluid-soundfont, fluidsynth, gcnano-binaries, |
| gensio, glslsandbox-player, libargon2, libmodsecurity, |
| libpam-nfc, libtelnet, lua-codegen, lua-livr, lua-livr-extra, |
| lua-rotas, lua-silva, mfoc, network-manager-openvpn, |
| nginx-modsecurity, perl-crypt-openssl-aes, |
| perl-math-prime-util, pipewire, ptm2human, python-aenum, |
| python-aiohttp-debugtoolbar, python-aiohttp-mako, |
| python-aiologstash, python-aiosignal, python-aiozipkin, |
| python-async-lru, python-avro, python-bunch, python-crontab, |
| python-dnspython, python-entrypoints, python-esptool, |
| python-frozenlist, python-future, python-gitdb, python-janus, |
| python-lockfile, python-logstash, python-nested-dict, |
| python-pbr, python-pyaes, python-pydantic, python-smmap2, |
| python-sockjs, python-zc-lockfile, raspi-gpio, rocksdb, |
| sdbusplus, spidermonkey, thermald, ti-sgx-libgbm, tinyssh, |
| tio, umtprd, weston-imx, wireguard-linux-compat, |
| wireguard-tools, xdg-dbus-proxy |
| |
| Removed packages: bluez_utils, celt051, erlang-p1-iconv, fis, |
| gadgetfs-test, libplayer, gstreamer, gst-ffmpeg, |
| gst-fsl-plugins, gst-omapfb, gst-plugins-bad, |
| gst-plugins-base, gst-plugins-good, gst-plugins-ugly, |
| perl-digest-md5, perl-mime-base64, perl-net-ping, |
| python-scapy3k, wireguard |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11906: the new version of mesa3d cannot support etnaviv when.. |
| #11996: opencv3 SIGILL on Cortex-A5 with VFPv4-D16 |
| #12121: PyQt5.QtSerialPort and other modules not being built |
| #12256: package tar is outdated (1.29 is 3 years old |
| #12286: Can't import gobject in python 3.8 |
| #12376: python-scapy3k is deprecated |
| #12386: carriage return issue when "make menuconfig" |
| #12441: qt5webengine build error: asm/errno.h: No such file or.. |
| #12446: Buildroot fails to finish installing packages |
| #12456: qtvirtualkeyboard: No such file or directory |
| #12461: libglib2 build files with deep directory structure |
| #12481: minicom fails when output directory path contains "m4" |
| #12501: libnss-3.49.1: ld error: multiple definition of `gcm_.. |
| #12526: host-nodejs 12.14.1: configure fail: AttributeError: .. |
| #12536: Linux-Headers extracting failure |
| #12546: Ninja 1.10 build Error |
| |
| 2019.11.3, released April 10th, 2020 |
| |
| Important / security related fixes. |
| |
| core: Fix compatibility with make 4.3+. Also fixup /lib |
| references in libtool .la files, similar to how it is done for |
| /usr/*. |
| |
| toolchain: Fix kernel headers validation check for external |
| toolchains. |
| |
| fs/initramfs: fix show-info so it also shows the usual |
| rootfs-related variables. |
| |
| Updated/fixed packages: barebox-aux, bluez5_utils, busybox, |
| civetweb, cog, collectd, ffmpeg, gcc, gnutls, gssdp, gvfs, haproxy, |
| hiredis, hostapd, kmscube, libical, libopenssl, libsndfile, |
| linux-tools, llvm, monit, ntp, php, pure-ftpd, radvd, redis, |
| samba4, screen, sysdig, syslinux, syslog-ng, tor, uacme, |
| util-linux, vala, vlc, wpa_supplicant, xserver_xorg-server |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12746: "sysdig" package description points to http://sysdig.org, .. |
| |
| 2019.11.2, released March 16th, 2020 |
| |
| Important / security related fixes. |
| |
| Core: Ensure package-file-lists data is correct after |
| incremental builds as well. |
| |
| Fix a race condition related to creating the output/staging |
| symlink on systems with coreutils < 8.27. |
| |
| Toolchain: ARC tools bumped to arc-2019.09. |
| |
| Br2-external: Fix patch handling when external linux-extension |
| packages are used. Fix compatibility with make 4.3+ |
| |
| Util-linux: Ensure that hwclock is built without GPLv3 |
| code. Notice that builds with hwclock has contained |
| GPLv3-licensed code since util-linux 2.30 (Buildroot 2017.08+) |
| |
| Updated/fixed packages: armadillo, at, bcm2835, binutils, |
| blktrace, bluez-alsa, bootstrap, brltty, busybox, cairo, |
| clamav, cog, cups, czmq, dnsmasq, docker-containerd, dovecot, |
| dovecot-pigeonhole, e2fsprogs, elf2flt, eudev, exim, exiv2, |
| fbgrab, gettext-tiny, glibc, go, grep, gst1-validate, guile, |
| imagemagick, jhead, jpeg-turbo, kvm-unit-tests, lapack, |
| libarchive, libcgroup, libdrm, libevent, libexif, libftdi1, |
| libgdiplus, libjpeg, libsigrok, libsndfile, libssh2, |
| libsvgtiny, libvncserver, libvorbis, libxml2, libxslt, linknx, |
| lxc, lz4, mariadb, mbedtls, meson, mongoose, mosquitto, musl, |
| ncurses, nodejs, ntfs-3g, ogre, opencv3, openjdk, openjpeg, |
| openrc, openswan, openvmtools, optee-test, patch, php, piglet, |
| postgresql, pppd, proftpd, pure-ftpd, python-django, |
| python-pyqt5, python-setuptools-scm-git-archive, python3, |
| qemu, qt5base, qt5tools, qt5virtualkeyboard, qt5webengine, |
| qwt, rdesktop, ruby, runc, samba4, shellinabox, |
| skeleton-init-openrc, smartmontools, spdlog, sqlcipher, squid, |
| suricata, swig, swupdate, sysklogd, taglib, thrift, |
| ti-cgt-pru, uclibc, util-linux, vorbis-tools, webkitgtk, |
| wireshark, wpebackend-fdo, wpewebkit, xen, |
| xserver_xorg-server, zeromq, zsh, zziplib |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11996: opencv3 SIGILL on Cortex-A5 with VFPv4-D16 |
| #12331: meson issue |
| #12456: qtvirtualkeyboard: No such file or directory |
| #12461: libglib2 build files with deep directory structure |
| #12481: minicom fails when output directory path contains "m4" |
| #12606: fbgrab location has changed |
| |
| 2019.11.1, released January 12th, 2020 |
| |
| Important / security related fixes. |
| |
| Infrastructure: kconfig: Fix reconfigure logic, python: Ensure |
| correct compiler and linker flags are used for compiled code |
| |
| utils/scanpypi: Remind users to update DEVELOPERS |
| |
| Defconfigs: imx6-sabresd: Fix the Qt5 display names, |
| imx8: Drop extra copy of U-Boot DTB |
| |
| Updated/fixed packages: acsccid, bitcoin, boost, busybox, |
| cc-tool, cmocka, cpio, cups, dante, dialog, dillo, docker-cli, |
| docker-containerd, docker-engine, easy-rsa, ebtables, |
| ecryptfs-utils, efl, ffmpeg, gdb, git, glibc, gnupg2, go, |
| gpsd, grpc, gst1-plugins-bad, iputils, jasper, |
| kf5-kcoreaddons, leveldb, libarchive, libfribi, libgit2, |
| libkrb5, libp11, librsvg, libssh, libtomcrypt, libuio, libv4l, |
| lirc-tools, log4cplus, lrzip, lvm2, mali-t76x, |
| matchbox-desktop, mender-grubenv, mmc-utils, mosquitto, |
| nodejs, ntp, openipmi, opencv3, openpowerlink, openrc, pango, |
| perl-sys-cpu, pimd, postgresql, pulseaudio, python-brotli, |
| python-coherence, python-crc16, python-django, python-dpkt, |
| python-gobject, python-pyasn-modules, python-pypcap, |
| python-pyqt5, python-subprocess32, python3, qpdf, |
| qt-webkit-kiosk, qt5virtualkeyboard, qt5webengine, quota, |
| rabbitmq-c, rauc, rpcbind, rtl8821au, runc, rygel, samba4, |
| sdl2, setserial, snort, spidev_test, |
| sunxi-mali-mainline-driver, syslog-ng, sysrepo, tcllib, tftpd, |
| usbmount, w_scan, wavpack, wsapi, wsapi-fcgi, wsapi-xavante, |
| x265, xserver_xorg-server, ytree, zip |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12121: PyQt5.QtSerialPort and other modules not being built |
| #12286: Can't import gobject in python 3.8 |
| |
| 2019.11, released December 1st, 2019 |
| |
| Various fixes. |
| |
| Infrastructure: Make HOST_<pkg>_DL_OPTS inherit from |
| <pkg>_DL_OPTS by default, just like it is done for a number of |
| other package variables. |
| |
| Add <pkg>_KEEP_PY_FILES to exclude specific python .py files |
| from the removal done by BR2_PACKAGE_PYTHON{,3}_PYC_ONLY for |
| the (rare) case where the .py files are needed at runtime |
| rather than .pyc. |
| |
| Updated/fixed packages: am33x-cm3, bind, collectd, go, gob2, |
| gst1-plugins-bad, haproxy, jasper, jpeg-turbo, libdrm, |
| libftdi, libftdi1, libnss, libselinux, libstrophe, lzma, |
| minicom, network-manager, nodejs, oniguruma, opencv3, |
| openvmtools, perl-gdgraph, perl-gdtextutil, prosody, |
| python-cchardet, systemd, tiff, wolfssl, |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11416: check-uniq-files staging issue |
| #12146: Oprofile runtime issue |
| #12166: Compiling nodejs for SAMA5D3 always crash with illegal inst.. |
| #12171: Python-opencv needs config.py and config-3.7.py to run.. |
| #12196: duma package |
| #12211: host-nodejs 10.15.3 package fail to build |
| #12316: tzdata fails to install with empty "default local time" |
| #12326: network-manager build fails with missing glib error |
| #12366: Gstreamer1 gst1-plugins-bad do not compile with RPI-Userland |
| |
| 2019.11-rc3, released November 24th, 2019 |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: asterisk, clamav, domoticz, faifa, |
| gerbera, kmod, kvm-unit-tests, libupnp18, linux-serial-test, |
| lsof, ltp-testsuite, lxc, mesa3d, mesa3d-headers, perl, php, |
| postgresql, qemu, rauc, redis, rpcbind, spice, spice-protocol, |
| systemd, tftpd, waylandpp, webkitgtk, zip |
| |
| 2019.11-rc2, released November 16th, 2019 |
| |
| Fixes all over the tree. |
| |
| Toolchain: ARC tools bumped to arc-2019.09-rc1, ensure |
| external toolchain kernel headers version check correctly stop |
| the build on mismatch |
| |
| Meson: Fix generation of global cross-compilation.conf |
| |
| Download: Also use the package download method for extra |
| downloads from the same site, so it does not get confused by |
| URLs containing '+' |
| |
| Defconfigs: Fix boot issue for beaglebone |
| |
| Updated/fixed packages: bird, chrony, connman, dhcp, domoticz, |
| dropwatch, dtc, elf2flt, gettext-tiny, glog, intel-microcode, |
| ipsec-tools, jailhouse, kodi, libfribi, libmbim, libressl, |
| libsigrokdecode, libsvgtiny, linux-serial-test, ltp-testsuite, |
| lvm2, lxc, mariadb, mesa3d, minizip, ndisc6, neardal, ninja, |
| ofono, openvmtools, oracle-mysql, qt5wayland, safeclib, socat, |
| sudo, systemd, wpewebkit, xserver_xorg-server |
| |
| 2019.11-rc1, released November 5th, 2019 |
| |
| Fixes all over the tree and new features. |
| |
| Dependencies: Gcc/g++ 4.8 or newer is now required on the |
| build host. |
| Ensure host has JSON::PP perl module installed if |
| webkitgtk/wpewebkit packages are enabled as it is needed |
| during their build process. |
| |
| Toolchain: Add support for the D programming language (GCC |
| 9.x, Glibc). |
| GCC 9.x updated to 9.2.0, Glibc updated to 2.30, Musl updated |
| to 1.1.24, uClibc-ng updated to 1.0.32, ARC toolchain updated |
| to arc-2019.09-eng002. |
| Musl: Add a patch to add support for |
| sched_{get,set}scheduler() and sched_{get,set}param() for |
| compatibility. |
| Generate check-headers program under BUILD_DIR rather than |
| /tmp to fix issues with distributions mounting /tmp noexec. |
| Also copy libssp.so for external toolchains if SSP |
| to handle toolchains providing SSP support in libssp rather |
| than in the C library |
| |
| New defconfigs: Beaglebone AI, FriendlyARM Nanopi NEO Plus2, |
| Libre Computer "La Frite", QEMU Armv7-A with trustzone/OP-TEE, |
| STM32MP157 Discovery Kit |
| |
| Arch: RISC-V: Default to a sensible floating point ABI based |
| on the selected ISA extensions rather than always defaulting |
| to ILP32/64 |
| |
| Graph-size: Package sizes are now shown in human readable form |
| (Kib/Mib/Gib) rather than always in Kib. Binary (KB/MB/GB) |
| format can be selected using the --binary option. The cut-off |
| limit for classifying packages as "other" is now configurable |
| using the --size-limit option. |
| |
| Br2-external: Linux kernel extensions can now also be provided |
| in an external tree by adding packages under |
| linux/linux-ext-*.mk. See the manual for details. |
| |
| Fakeroot now works correctly under Microsoft Windows 10 |
| Services for Linux, which does not provide SYSV IPC support |
| |
| The check-uniq-files logic which would complain if multiple |
| packages would touch the same files has been removed as it |
| causes issues in certain situations (when packages are |
| rebuilt) and the issue is no longer considered a problem for |
| toplevel parallel builds as those will use a per-package |
| staging/target directory. |
| With this removed, Python is no longer required for a basic |
| build (only for optional scripts). |
| |
| support/scripts/genimage.sh will no longer make a copy of |
| TARGET_DIR, speeding up post-build/image scripts. |
| |
| The runtime test logic now uses Python 3.x. |
| |
| A 'v' prefix has been dropped from the <pkg>_SOURCE variable |
| for a number of packages to match the version numbers used by |
| https://release-monitoring.org |
| |
| New packages: caps, collectl, dav1d, fstrcmp, ima-evm-utils, |
| jitterentropy-library, kodi-vfs-rar, kodi-vfs-sftp, libavl, |
| libhttpserver, libmspack, libnetconf2, libolm, libyang, |
| linux-serial-test, lrzip, mdevd, minimodem, musl-fts, netifrc, |
| ogre, openlayers, python-aioredis, python-asgiref, |
| python-backports-functools-lru-cache, python-bluezero, |
| python-brotli, python-channels, python-channels-redis, |
| python-colorlog, python-daphne, python-django-enumfields, |
| python-jaraco-functools, python-kiwisolver, python-msgfy, |
| python-rpi-ws281x, python-setuptools-scm-git-archive, |
| python-simplelogging, python-soupsieve, python-sqliteschema, |
| python-sqlparse, python-tqdm, python-webencodings, qt5webview, |
| restclient-cpp, ripgrep, snmpclitools, sunwait, sysrepo, |
| uacme, utf8proc, uvw, ytree |
| |
| Removed packages: alljoyn, alljoyn-base, alljoyn-tcl-base, |
| devmem2, eventlog, kodi-audiodecoder-opus, |
| kodi-screensaver-planestate, kodi-visualisation-waveforhue, |
| python-pysnmp-apps, riscv-pk, ustr |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #9881: systemd-resolved not setting resolv.conf link |
| #10171: devmem2 w (word) is 8 bytes in x86 64 systems |
| #10586: musl gcc has ifunc enabled when musl doesn't support it |
| #10806: Allow nfs-utils to use ipv6 |
| #11366: [2018.08] SysV IPC not available for fakeroot on WSL |
| #11411: check-uniq-files target issue |
| #11766: Console (getty) issues with systemd |
| #11781: mariadb build error |
| #12031: Build of cups-filters fails while linking, apparently due.. |
| #12116: console prompt does not appear after login |
| #12141: eudev package is missing "render" and "kvm" groups |
| #12181: dropbear: norootlogin (-w) no longer works when PAM is enabled |
| #12186: Raspberry Pi Zero-W build fails on newer kernel versions |
| #12191: cmake BUILDDIR |
| #12241: Permission denied while running "make" |
| #12261: sudo versions prior to 1.8.28 are affected. |
| #12276: make clean/distclean does not remove BR2_DL_DIR and BR2_HOST_DIR |
| #12281: Custom configuration fails to build (based on raspberrypi3_.. |
| |
| 2019.08.3, released December 7th, 2019 |
| |
| Important / security related fixes. |
| |
| Infrastructure: Make HOST_<pkg>_DL_OPTS inherit from |
| <pkg>_DL_OPTS by default, just like it is done for a number of |
| other package variables |
| |
| Add <pkg>_KEEP_PY_FILES to exclude specific python .py files |
| from the removal done by BR2_PACKAGE_PYTHON{,3}_PYC_ONLY for |
| the (rare) case where the .py files are needed at runtime |
| rather than .pyc. |
| |
| Fix <pkg>-reconfigure handling for packages using the kconfig |
| infrastructure. |
| |
| Toolchain: ensure external toolchain kernel headers version |
| check correctly stop the build on mismatch |
| |
| Deconfigs: beaglebone: fix boot issue |
| |
| Updated/fixed packages: am33x-cm3, asterisk, bind, chrony, |
| clamav, cmocka, collectd, connman, dhcp, dropwatch, faifa, |
| gettext-tiny, gob2, haproxy, intel-microcode, ipsec-tools, |
| jailhouse, jasper, jpeg-turbo, kodi, kvm-unit-tests, libftdi, |
| libftdi1, libnss, libressl, libstrophe, libsvgtiny, lvm2, |
| lzma, mariadb, minicom, mosquitto, neardal, ninja, nodejs, |
| oniguruma, openvmtools, oracle-mysql, perl-gdgraph, |
| perl-gdtextutil, php, postgresql, prosody, python-cchardet, |
| python-django, qt5wayland, rabbitmq, rauc, redis, rpcbind, |
| socat, spice, spice-protocol, tftpd, tiff, webkitgtk |
| |
| New packages: libmspack |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12166: Compiling nodejs for SAMA5D3 always crash with illegal inst.. |
| #12171: Python-opencv needs config.py and config-3.7.py to run.. |
| #12211: host-nodejs 10.15.3 package fail to build |
| #12316: tzdata fails to install with empty "default local time" |
| |
| 2019.08.2, released November 9th, 2019 |
| |
| Important / security related fixes. |
| |
| Toolchain: Also copy libssp.so for external toolchains if SSP |
| to handle toolchains providing SSP support in libssp rather |
| than in the C library |
| |
| Download: Also use the package download method for extra |
| downloads from the same site, so it does not get confused by |
| URLs containing '+' |
| |
| Fakeroot now works correctly under Microsoft Windows 10 |
| Services for Linux, which does not provide SYSV IPC support |
| |
| utils/test-pkg: ensure to exit with an error upon failure |
| |
| Updated/fixed packages: asterisk, azmq, binutils, |
| cups-filters, domoticz, dtc, duma, elf2flt, eudev, exfat, |
| exfat-utils, fakeroot, fdk-aac, file, freerdp, gcc, gd, |
| ghostscript, go, gpsd, grpc, gst1-plugins-base, gvfs, icu, |
| intel-microcode, kvm-unit-tests, libfribidi, libnspr, libnss, |
| libopenssl, libpcap, libpciaccess, librsvg, libseccomp, |
| libsigrok, libtorrent, libunwind, libva, linux-tools, |
| lua-sdl2, lxc, minizip, mjpegtools, mongoose, mono, nbd, |
| nfs-utils, php, piglit, python, python-autobahn, |
| python-pysnmp-apps, python-tornado, python3, qemu, qt5base, |
| ruby, safeclib, samba4, sdl_mixer, sox, sudo, suricata, |
| systemd, tcpdump, unscd, util-linux, vdr-plugin-vnsiserver, |
| vtun, wireshark, xvisor, yaffs2utils |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11366: [2018.08] SysV IPC not available for fakeroot on WSL |
| #12261: sudo versions prior to 1.8.28 are affected |
| |
| 2019.08.1, released October 3rd, 2019 |
| |
| Important / security related fixes. |
| |
| Defconfigs: AArch64-efi: Fix grub configuration, Beaglebone: |
| Use default console settings |
| |
| Dependencies: Ensure host has JSON::PP perl module installed |
| if webkitgtk/wpewebkit packages are enabled as it is needed |
| during their build process. |
| |
| Toolchain: Generate check-headers program under BUILD_DIR |
| rather than /tmp to fix issues with distributions mounting |
| /tmp noexec. |
| |
| Updated/fixed packages: asterisk, augeas, axel, bind, bwm-ng, |
| cups, cups-filters, docker-cli, docker-engine, docker-proxy, |
| e2fsprogs, eudev, exim, expat, gcc, go, haveged, ifplugd, joe, |
| kf5-extra-cmake-modules, kf5-modemmanager-qt, |
| kf5-networkmanager-qt, libcamera, libcurl, libgcrypt, |
| libglib2, libgpg-error, libnspr, libnss, libopenssl, |
| logrotate, luksmeta, mariadb, mbedtls, mongodb, mosquitto, |
| ncurses, nfs-utils, nghttp2, nodejs, openvmtools, php, |
| protobuf, putty, qemu, samba4, snort, swupdate, |
| systemd-bootchart, thttpd, uclibc, unzip, util-linux, |
| wireshark |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10806: Allow nfs-utils to use ipv6 |
| #11781: mariadb build error |
| #12031: Build of cups-filters fails while linking, apparently due.. |
| #12141: eudev package is missing "render" and "kvm" groups |
| #12241: Permission denied while running "make" |
| |
| 2019.08, released September 1st, 2019 |
| |
| Various fixes. |
| |
| Defconfigs: Removed nanopc t4, nanopi m4 and neo4, pine64 |
| rockpro64 and raxda rock pi4 as they rely on a ARM32 toolchain |
| on the build host to build ATF. These defconfigs will be added |
| back once a package providing such toolchain is |
| available. Also dropped ts4800 defconfig as it does not build |
| with GCC >= 8.x. |
| |
| Updated/fixed packages: libxcb, php, python-numpy, webkitgtk, |
| wpewebkit, xfont_font-util |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12156: buildroot-2019.08-rc3 does not build for Pi Zero W |
| |
| 2019.08-rc3, released August 28th, 2019 |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: clamav, dovecot, dovecot-pigeonhole, |
| gcc, intel-microcode, libmicrohttpd, libmodplug, mpg123, |
| nginx, openldap, python, qemu, samba4, squid, strace, vlc |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11686: fbdev_drv.so: undefined symbol: shadowUpdatePackedWeak,.. |
| |
| 2019.08-rc2, released August 20th, 2019 |
| |
| Fixes all over the tree. |
| |
| Compile fixes for a number of defconfigs. |
| |
| Updated/fixed packages: apache, autofs, batctl, batman-adv, |
| bind, collectd, cwiid, dahdi-linux, dahdi-tools, daq, |
| dehydrated, dhcp, dtc, efl, enlightenment, evtest, giflib, |
| gnutls, go, gst-plugins-bad, gst-plugins-base, |
| gst1-plugins-bad, gst1-plugins-base, gst1-rtsp-server, gtkmm3, |
| gupnp, harfbuzz, imagemagick, lftp, libbsd, libcpprestsdk, |
| libdnet, libfm, libgit2, libgtk2, libgtk3, libpri, librsvg, |
| libss7, libssh2, libwpe, lua-cqueues, metacity, micropython, |
| mpd, mpg123, musl, mpv, openblas, openbox, opencv, pango, |
| pcmanfm, piglit, pigpio, pinentry, postgresql, qemu, qt5base, |
| qt5enginio, qt5multimedia, qt5serialbus, quagga, quazip, |
| rrdtool, rygel, samba4, stellarium, tcpreplay, ti-gfx, vte, |
| wampcc, wilink-bt-firmware, wireless-regdb, wpebackend-fdo, |
| xscreensaver |
| |
| Removed packages: libamcodec, odroid-mali, odroid-scripts |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #9481: NetworkManager/Ping unable to resolve domains |
| #10566: php.mk is missing option --with-pgsql |
| #10861: Package batman_adv Makefile is missing include header direct.. |
| #11641: linux kernel .config timestamp always out of date fixed with.. |
| #11671: russian locale ru_RU:145: LC_TIME: syntax error |
| #11701: recuuring of usr and in bin shortcuts are created |
| #11741: pigpio does not build host-pigpio |
| #11876: automount using host mount/umount |
| #11881: Build breaks with lftp package enabled and libexpat1-dev inst.. |
| #11921: dahdi fails to build |
| #11936: libcpprestsdk should install to staging |
| #11946: wilink-bt-firmware: moved from github to http://git.ti.com/ti-bt |
| #11961: libpri build failure |
| #12086: dhcp shared libraries not installed to target |
| #12096: tcpreplay: build fails if libdumbnet-dev is installed in the.. |
| #12106: daq: build fails if libdumbnet-dev is installed in the host |
| #12126: vc4 has neon as hard dependency |
| |
| 2019.08-rc1, released August 9th, 2019 |
| |
| Fixes all over the tree and new features. |
| |
| toolchain: ARC toolchain updated to 2019.03 (binutils 2.32.51 |
| / GCC 8.3.1 / glibc 2.29), ARM AAarch64/ARM toolchains updated |
| to 2019.03. Add GCC 9.1.0, remove GCC 4.9 and 6.5, add GDB |
| 8.3, remove GDB 7.12 and 8.0.1, default to GDB 8.2, GCC |
| 8.3.0. Musl updated to 1.1.23, bringing support for RISC-V 64. |
| |
| Architectures: Internal toolchain support for C-SKY, support |
| for ARC HS48 v3.1 and HS38 with Quad MAC & FPU, support for |
| ARM A76, A76/A55 big.LITTLE, emag, neoverse-N1, phecda and |
| tsv110. |
| |
| Filesystems: Pass extra pax options to tar for binary |
| reproducibility. Build host-cpio for the --reproducible option |
| support when BR2_REPRODUCIBLE is enabled. Genimage updated to |
| version 11, bringing GPT support. |
| |
| Br2-external: Add support for injecting additional options to |
| the list of preconfigured external toolchains and libjpeg and |
| openssl providers using files under provides/. See the manual |
| for details. |
| |
| Ensure custom <pkg>_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS are |
| passed before the standard exclusions so they are not ignored |
| by rsync when using override-srcdir. |
| |
| Gnuconfig updated to 2019-05-28, adding C-SKY support. |
| |
| test-pkg: Correct long option handling and clean output dir |
| after a successful build to save disk space. |
| |
| support/testing: Emulate a machine with 256MB RAM to fix |
| issues with certain tests running out of memory, use |
| virtio-rng to provide needed entrophy. |
| |
| pkg-stats: support outputting in JSON format with --json for |
| easier post processing. The classic HTML output is still |
| available with --html. Parallelize access to |
| release-monitoring.org to speed up runtime. |
| |
| Drop non-conventional version prefix/suffix/separators for |
| packages for better compatibility with release-monitoring.org |
| |
| Packages: |
| Init systems: Add basic openrc support and |
| <pkg>_INSTALL_INIT_OPENRC variable in the infrastructure to |
| install openrc service scripts if enabled. |
| |
| busybox: Build each applet as a separate binary when SELinux |
| is enabled for more finegrained policy control. Use daemon |
| mode for mdev rather than legacy hotplug. |
| |
| linux: Workaround -Werror related build failure on powerpc, |
| by forcing CONFIG_PPC_DISABLE_WERROR on. |
| |
| Defconfigs: QEMU: use 'rootwait' kernel option to ensure root |
| partition is available before mounting. |
| |
| New defconfigs: HiFive Unleashed, I.MX8MM EVK and Pico, Nanopi |
| m4 and neo4, Nanopc t4, Olimex A33 olinuxino, Pine64 |
| Rockpro64, PowerPC mac99, QEMU C-SKY 610/807/810/860 virt, |
| Raspberry Pi 4, Raxda rock pi4, Solidrun Clearfog GT-8K |
| |
| Removed defconfigs: Odroid C2 |
| |
| New packages: bitcoin, c-capnproto, fatcat, ifmetric, jack1, |
| jailhouse, libubootenv, luasyslog, mender-grubenv, |
| murata-cyw-fw, openrc, piglit, python-colorama, python-cycler, |
| python-hiredis, python-ifaddr, python-inflection, |
| python-iptables, python-matplotlib, python-periphery, |
| python-pycairo, python-redis, python-termcolor, |
| python-tinyrpc, python-txdbus, skeleton-init-openrc, spdlog, |
| sshguard, stellarium, zziplib |
| |
| Removed packages: xapp_mkfontdir |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11096: Upgrade from glibc 2.26 to 2.27 broke some locales... |
| #11271: utils/check-package fails with exception depending on.. |
| #11991: [numpy] segfault when compiling for RPi3 64bits |
| #12016: Grub fails to boot bzImage after upgrade to 2019.05 |
| #12046: Can’t login as root user after upgrading to buildroot.. |
| #12051: package/dhcp installs libtool wrapper scripts on tar... |
| #12076: Patchelf can link against an incompatible libc++ ver... |
| |
| 2019.05.3, Released October 3rd, 2019 |
| |
| Important / security related fixes. |
| |
| Defconfigs: AArch64-efi: Fix grub configuration, Beaglebone: |
| Use default console settings |
| |
| Dependencies: Ensure host has JSON::PP perl module installed |
| if webkitgtk/wpewebkit packages are enabled as it is needed |
| during their build process. |
| |
| Toolchain: Generate check-headers program under BUILD_DIR |
| rather than /tmp to fix issues with distributions mounting |
| /tmp noexec. |
| |
| Updated/fixed packages: asterisk, augeas, bind, bwm-ng, cups, |
| cups-filters, docker-cli, docker-engine, docker-proxy, |
| e2fsprogs, eudev, exim, expat, gcc, go, haveged, ifplugd, |
| iptables, joe, kf5-extra-cmake-modules, kf5-modemmanager-qt, |
| kf5-networkmanager-qtlibcamera, libcurl, libgcrypt, |
| libgpg-error, libnftl, libnspr, libnss, libopenssl, |
| libtorrent-rasterbar, luksmeta, mariadb, mbedtls, mongodb, |
| mosquitto, ncurses, nfs-utils, nghttp2, nodejs, openvmtools, |
| php, protobuf, putty, qemu, samba4, swupdate, |
| systemd-bootchart, thttpd, uclibc, unzip, util-linux, |
| wireshark |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10806: Allow nfs-utils to use ipv6 |
| #11781: mariadb build error |
| #12031: Build of cups-filters fails while linking, apparently due.. |
| #12141: eudev package is missing "render" and "kvm" groups |
| #12241: Permission denied while running "make" |
| |
| 2019.05.2, Released September 3rd, 2019 |
| |
| Important / security related fixes. |
| |
| Filesystems: Pass extra pax options to tar for binary |
| reproducibility. |
| |
| Updated/fixed packages: apache, arm-trusted-firmware, |
| asterisk, atk, autofs, batctl, batman-adv, berkeleydb, |
| busybox, bzip2, clamav, cloop, cmake, collectd, connman-gtk, |
| dahdi-linux, dahdi-tools, daq, dehydrated, dhcp, dovecot, |
| dovecot-pigeonhole,, elfutils, evtest, exim, expect, giflib, |
| git, glib-networking, glibc, gnupg2, gnutls, go, |
| gst1-rtsp-server, gtkperf, gupnp-tools, gvfs, imagemagick, |
| imx-uuc, intel-microcode, json-glib, lftp, libbsd, libcurl, |
| libgit2, libgtk2, libgtk3, libmodplug, libnss, libpri, |
| libshout, libss7, libssh2, libvips, libxcb, linux-headers, |
| mdadm, mesa3d, metacity, mpg123, mosquitto, musl, nginx, |
| oniguruma, openblas, opencv3, openjdk, openjdk-bin, openldap, |
| openvmtools, pcmanfm, php, pigpio, postgresql, prboom, |
| proftpd, proj, python, python-django, python-idna, |
| python-numpy, python-urllib3, python3, qemu, qt5, qt5base, |
| qt5enginio, quagga, rygel, squid, subversion, tcpreplay, |
| unzip, vlc, vte, webkitgtk, wireless-regdb, xen, |
| xfont_font-util, xlib_libICE, xlib_libXfont, xlib_libXfont2, |
| yad, zeromq |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11741: pigpio does not build host-pigpio |
| #11876: automount using host mount/umount |
| #11881: Build breaks with lftp package enabled and libexpat1-dev inst.. |
| #11921: dahdi fails to build |
| #11961: libpri build failure |
| #12086: (dhcpd-missing-libs) - dhcp shared libraries not installed to.. |
| #12096: tcpreplay: build fails if libdumbnet-dev is installed in the.. |
| #12106: daq: build fails if libdumbnet-dev is installed in the host |
| #12126: vc4 has neon as hard dependency |
| |
| 2019.05.1, Released July 7th, 2019 |
| |
| Important / security related fixes. |
| |
| arch: x86: Fix typo breaking 'core-avx2' variant |
| |
| linux: Workaround -Werror related build failure on powerpc, |
| by forcing CONFIG_PPC_DISABLE_WERROR on. |
| |
| support/testing: Emulate a machine with 256MB RAM to fix |
| issues with certain tests running out of memory. |
| |
| test-pkg: Correct long option handling and clean output dir |
| after a successful build to save disk space. |
| |
| Defconfigs: QEMU: use 'rootwait' kernel option to ensure root |
| partition is available before mounting. |
| |
| Updated/fixed packages: barebox, busybox, bzip2, davfs2, |
| dialog, docker-cli, docker-engine, exim, expat, faad2, |
| haveged, irssi, libcamera, libcdaudio, libcurl, libglib2, |
| libressl, libsecret, lmbench, meson, monit, php, postgresql, |
| psplash, python-django, qt5base, tvheadend, webkitgtk, |
| xserver_xorg-server, znc |
| |
| 2019.05, released June 2nd, 2019 |
| |
| Various fixes. |
| |
| Toolchain: Ensure pre-built Andes toolchains can only be |
| selected when x86 32bit support is available on the host. |
| Disallow PowerPC SPE ABI for GCC >= 8.x, as it is no longer |
| supported. |
| |
| Infra: pkg-config: Use a dedicated timestamp file rather than |
| .config as that gets touched by linux-4.19+, causing repeated |
| builds. |
| |
| Add C-SKY support to our config.sub (gnuconfig) |
| |
| Updated/fixed packages: dosfstools, botan, brotli, dropbear, |
| flare-engine, gst1-plugins-bad, libhtp, libnss, libopenssl, |
| linuxptp, matchbox-panel, mender, mutt, netsurf, |
| network-manager, opencv3, openjdk, openmpi, php, |
| python-cython, qt5multimedia, qtwayland, qt5webkit-examples, |
| supertux, suricata, tpm2-totp, v4l2loopback, wireshark, |
| wpewebkit |
| |
| 2019.05-rc3, released May 25th, 2019 |
| |
| Fixes all over the tree. |
| |
| check-bin-arch: Ignore /usr/lib/grub, similar to how /lib/grub |
| is ignored. |
| |
| check-package: Warn about utf-8 characters in .mk files |
| |
| Linux: Default to 5.1.x series |
| |
| Updated/fixed packages: assimp, atop, chocolate-doom, cjson, |
| ddrescue, dhcp, ffmpeg, gerbera, glibmm, gpsd, gst-ffmpeg, |
| intel-microcode, jasper, keepalived, kismet, libcpprestsdk, |
| libcurl, libssh2, libupnp18, luarocks, mono-gtksharp3, opus, |
| postgresql, pcsc-lite, python, tslib, webkitgtk, |
| wpebackend-fdo, wpewebkit |
| |
| 2019.05-rc2, released May 15th, 2019 |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: bind, bullet, ca-certificates, |
| collectd, cracklib, dhcp, gdb, libinput, libtorrent-rasterbar, |
| linknx, lynx, mono, netsurf, optee-os, postgresql, qt5enginio, |
| qt5multimedia, rpm, samba4, sqlite, strace, uclibc, woff2 |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11841: grub-efi.cfg not used when building EFI disk image |
| |
| 2019.05-rc1, Released May 8th, 2019 |
| |
| Fixes all over the tree and new features. |
| |
| Architecture: Andes 32-bit (nds32) support added. |
| |
| Only build host-lzip / host-xz when really needed by packages, |
| not just when not available on the build host. |
| |
| Toolchain: Glibc bumped to 2.29, musl bumped to 1.1.22, |
| binutils 2.32 added, 2.28/2.29 removed, default changed to |
| 2.31.1. |
| |
| fs: Set FAKEROOTDONTTRYCHOWN environment variable to not |
| forward {f,l,}chown calls to libc when running under fakeroot |
| to fix issues when building in restricted environments |
| (E.G. user namespace with bubblewrap). |
| |
| Linux: Also build default make target to ensure extra files |
| like the gdb scripts enabled by CONFIG_GDB_SCRIPTS are also |
| built. Notice: This may mean that extra host utilities like |
| uboot-mkimage are needed. |
| |
| Infrastructure: show-info and <pkg>-show-info make targets |
| added to output package metadata in JSON format for external |
| use. |
| |
| pkg-generic: Only tweak .la files needing it to ensure they |
| are not included in subsequent package file lists. |
| |
| test-pkg: Generate a basic package config if none is |
| specified. |
| |
| Gettext-tiny package added as an lightweight replacement for |
| GNU gettext for situations where NLS support is not needed. |
| |
| New defconfigs: Andes AE3XX, Freescale imx8mpico / imx8qxpmek |
| / T2080 QDS RDB, Licheepi zero, Orangepi R1 |
| |
| Removed defconfigs: Olimx A20 Olinuxino Lime legacy |
| |
| New packages: bats-core, bayer2rgb-neon, brickd, cog, dacapo, |
| enet, gettext-tiny, gli, gst1-plugins-bayer2rgb-neon, |
| imx-sc-firmware, intel-mediadriver, intel-mediasdk, libcamera, |
| libhtp, libp11, libwpe, lua-binaryheap, lua-gd, lua-lunitx, |
| mender-artifact, most, oniguruma, openjdk, openjdk-bin, |
| opensbi, optee-benchmark, optee-client, optee-examples, |
| optee-os, optee-test, paho-mqtt-cpp, python-aioblescan, |
| python-aioconsole, python-aiohttp-cors, python-aiomonitor, |
| python-backcall, python-jedi, python-parso, python-pyjwt, |
| python-terminaltables, suricata, tpm2-totp, uftp, |
| wpebackend-fdo, wpewebkit |
| |
| Removed packages: libump, lunit, sunxi-mali |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11716: Typo on website, saying latest release is 2018.2.11 |
| #11756: package/syslinux: MBR's don't fit because of binutils.. |
| #11761: Building custom kernel 5.1-rc3 or later breaks on objtool |
| #11816: Only selected coreutils binaries are installed |
| |
| 2019.02.11, released April 9th, 2020 |
| |
| Important / security related fixes. |
| |
| core: Fix compatibility with make 4.3+. Also fixup /lib |
| references in libtool .la files, similar to how it is done for |
| /usr/*. |
| |
| toolchain: Fix kernel headers validation check for external |
| toolchains. |
| |
| Updated/fixed packages: barebox-aux, bluez5_utils, busybox, |
| civetweb, collectd, ffmpeg, gcc, gnutls, gvfs, haproxy, |
| hiredis, kmscube, libical, libopenssl, libsndfile, |
| linux-tools, ntp, php, pure-ftpd, screen, sysdig, tor, |
| util-linux, vala, vlc, xserver_xorg-server |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12746: "sysdig" package description points to http://sysdig.org, .. |
| |
| 2019.02.10, released March 16th, 2020 |
| |
| Important / security related fixes. |
| |
| Core: Ensure package-file-lists data is correct after |
| incremental builds as well. |
| |
| Fix a race condition related to creating the output/staging |
| symlink on systems with coreutils < 8.27. |
| |
| Br2-external: Fix compatibility with make 4.3+ |
| |
| Util-linux: Ensure that hwclock is built without GPLv3 |
| code. Notice that builds with hwclock has contained |
| GPLv3-licensed code since util-linux 2.30 (Buildroot 2017.08+) |
| |
| Updated/fixed packages: armadillo, at, binutils, blktrace, |
| bootstrap, busybox, cairo, cups, czmq, dnsmasq, |
| docker-containerd, dovecot, dovecot-pigeonhole, e2fsprogs, |
| eudev, exim, exiv2, fbgrab, grep, gst1-validate, guile, |
| imagemagick, jhead, kvm-unit-tests, lapack, libcgroup, |
| libftdi1, libjpeg, libsigrok, libsndfile, libssh2, libsvgtiny, |
| libvncserver, libvorbis, libxml2, libxslt, linux, lz4, |
| mariadb, mbedtls, meson, mfgtools, mongoose, ncurses, ntfs-3g, |
| opencv3, openjpeg, openswan, openvmtools, patch, php, |
| postgresql, pppd, proftpd, pure-ftpd, python-django, |
| python-pyqt5, python3, qemu, qt5base, qt5webengine, qwt, |
| rdesktop, ruby, runc, samba4, shellinabox, smartmontools, |
| sqlcipher, squid, swupdate, sysklogd, taglib, thrift, |
| ti-cgt-pru, uboot, util-linux, vorbis-tools, webkitgtk, |
| wireshark, xen, xserver_xorg-server, zeromq, zsh |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11996: opencv3 SIGILL on Cortex-A5 with VFPv4-D16 |
| #12331: meson issue |
| #12461: libglib2 build files with deep directory structure |
| #12606: fbgrab location has changed |
| |
| 2019.02.9, released January 12th, 2020 |
| |
| Important / security related fixes. |
| |
| pkg-python infrastructure: Ensure correct compiler and linker |
| flags are used for compiled code |
| |
| utils/scanpypi: Remind users to update DEVELOPERS |
| |
| Updated/fixed packages: busybox, cc-tool, cpio, cups, dante, |
| dillo, docker-cli, docker-containerd, docker-engine, easy-rsa, |
| ecryptfs-utils, efl, git, glibc, gnupg2, gst1-plugins-bad, |
| kf5-kcoreaddons, libarchive, libgit2, libkrb5, librsvg, |
| libssh, libtomcrypt, libuio, lirc-tools, lvm2, |
| matchbox-desktop, nodejs, ntp, opencv3, openpowerlink, |
| python-django, python-ecdsa, python-pyasn-modules, |
| python-pyqt5, python-subprocess32, python3, qpdf, runc, rygel, |
| samba4, sdl2, wavpack, xserver_xorg-server, zip |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12121: PyQt5.QtSerialPort and other modules not being built |
| |
| 2019.02.8, released December 7th, 2019 |
| |
| Important / security related fixes. |
| |
| Infrastructure: Make HOST_<pkg>_DL_OPTS inherit from |
| <pkg>_DL_OPTS by default, just like it is done for a number of |
| other package variables |
| |
| Add <pkg>_KEEP_PY_FILES to exclude specific python .py files |
| from the removal done by BR2_PACKAGE_PYTHON{,3}_PYC_ONLY for |
| the (rare) case where the .py files are needed at runtime |
| rather than .pyc. |
| |
| Fix <pkg>-reconfigure handling for packages using the kconfig |
| infrastructure. |
| |
| Toolchain: ensure external toolchain kernel headers version |
| check correctly stop the build on mismatch |
| |
| Deconfigs: beaglebone: fix boot issue |
| |
| Updated/fixed packages: am33x-cm3, asterisk, bind, chrony, |
| clamav, collectd, connman, faifa, gob2, haproxy, |
| intel-microcode, ipsec-tools, jasper, jpeg-turbo, kodi, |
| kvm-unit-tests, libftdi, libftdi1, libnss, libstrophe, |
| libsvgtiny, lvm2, lzma, mariadb, minicom, neardal, nodejs, |
| opencv3, openvmtools, oracle-mysql, perl-gdgraph, |
| perl-gdtextutil, php, postgresql, prosody, python-django, |
| rabbitmq-c, rauc, redis, rpcbind, socat, spice, |
| spice-protocol, tftpd, tiff, webkitgtk |
| |
| New packages: libmspack |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #12166: Compiling nodejs for SAMA5D3 always crash with illegal inst.. |
| #12171: Python-opencv needs config.py and config-3.7.py to run.. |
| #12211: host-nodejs 10.15.3 package fail to build |
| #12316: tzdata fails to install with empty "default local time" |
| |
| 2019.02.7, Released November 10th, 2019 |
| |
| Important / security related fixes. |
| |
| support/testing: use a kernel with HW_RANDOM_VIRTIO to work |
| around issues with lack of entrophy |
| |
| Toolchain: Also copy libssp.so for external toolchains if SSP |
| is enabled to handle toolchains providing SSP support in |
| libssp rather than in the C library |
| |
| Download: Also use the package download method for extra |
| downloads from the same site, so it does not get confused by |
| URLs containing '+' |
| |
| Fakeroot now works correctly under Microsoft Windows 10 |
| Services for Linux, which does not provide SYSV IPC support |
| |
| utils/test-pkg: ensure to exit with an error upon failure |
| |
| Updated/fixed packages: asterisk, azmq, cups-filters, |
| domoticz, duma, elf2flt, eudev, exfat, exfat-utils, fakeroot, |
| file, freerdp, gd, ghostscript, go, gvfs, intel-microcode, |
| kvm-unit-tests, libarchive, libnspr, libnss, libopenssl, |
| libpcap, libpciaccess, librsvg, libseccomp, libsigrok, |
| libtorrent, libunwind, linux-tools, lua-sdl2, lxc, minizip, |
| mjpegtools, mongoose, php, python, python-pysnmp-apps, |
| python3, qemu, qt5base, ruby, safeclib, samba4, sdl_mixer, |
| sox, sudo, systemd, tcpdump, unscd, util-lkinux, vtun, xvisor, |
| yaffs2utils |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11366: [2018.08] SysV IPC not available for fakeroot on WSL |
| #12261: sudo versions prior to 1.8.28 are affected |
| |
| 2019.02.6, Released October 3rd, 2019 |
| |
| Important / security related fixes. |
| |
| Defconfigs: AArch64-efi: Fix grub configuration, Beaglebone: |
| Use default console settings |
| |
| Dependencies: Ensure host has JSON::PP perl module installed |
| if webkitgtk/wpewebkit packages are enabled as it is needed |
| during their build process. |
| |
| Toolchain: Generate check-headers program under BUILD_DIR |
| rather than /tmp to fix issues with distributions mounting |
| /tmp noexec. |
| |
| Updated/fixed packages: asterisk, augeas, bind, bwm-ng, cups, |
| cups-filters, docker-cli, docker-engine, docker-proxy, |
| dropbear, e2fsprogs, eudev, exim, expat, gcc, go, ifplugd, |
| haveged, iptables, joe, kf5-extra-cmake-modules, |
| kf5-modemmanager-qt, kf5-networkmanager-qt, libcurl, |
| libgcrypt, libgpg-error, libnftl, libnspr, libnss, libopenssl, |
| luksmeta, mariadb, mbedtls, mongodb, mosquitto, ncurses, |
| nfs-utils, nghttp2, nodejs, openvmtools, php, protobuf, putty, |
| qemu, qt5base, samba4, swupdate, systemd-bootchart, thttpd, |
| uclibc, unzip, util-linux, wireshark |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10806: Allow nfs-utils to use ipv6 |
| #11781: mariadb build error |
| #12031: Build of cups-filters fails while linking, apparently due.. |
| #12141: eudev package is missing "render" and "kvm" groups |
| #12181: dropbear: norootlogin (-w) no longer works when PAM is enabled |
| #12241: Permission denied while running "make" |
| |
| 2019.02.5, Released September 2nd, 2019 |
| |
| Important / security related fixes. |
| |
| Filesystems: Pass extra pax options to tar for binary |
| reproducibility. |
| |
| Updated/fixed packages: apache, arm-trusted-firmware, |
| asterisk, atk, autofs, batctl, batman-adv, berkeleydb, brotli, |
| busybox, bzip2, clamav, cloop, cmake, collectd, connman-gtk, |
| cryptopp, dahdi-linux, dahdi-tools, daq, dehydrated, dovecot, |
| dovecot-pigeonhole,, elfutils, evtest, exim, expect, giflib, |
| git, glib-networking, glibc, gnupg2, gnutls, go, |
| gst1-rtsp-server, gtkperf, gupnp-tools, gvfs, imagemagick, |
| imx-uuc, intel-microcode, json-glib, lftp, libbsd, libcurl, |
| libgit2, libgtk3, libmodplug, libnss, libpri, libshout, |
| libss7, libssh2, libvips, libxcb, linux-headers, mdadm, |
| mesa3d, metacity, mpg123, mosquitto, musl, nginx, openblas, |
| opencv3, openldap, openvmtools, pcmanfm, php, pigpio, |
| postgresql, prboom, proftpd, proj, python, python-django, |
| python-idna, python-numpy, python-urllib3, python3, qemu, qt5, |
| qt5base, qt5enginio, quagga, rygel, squid, subversion, |
| tcpreplay, unzip, vlc, vte, webkitgtk, weston, wireless-regdb, |
| xen, xfont_font-util, xlib_libICE, xlib_libXfont, |
| xlib_libXfont2, yad, zeromq |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11741: pigpio does not build host-pigpio |
| #11876: automount using host mount/umount |
| #11881: Build breaks with lftp package enabled and libexpat1-dev inst.. |
| #11921: dahdi fails to build |
| #11961: libpri build failure |
| #12096: tcpreplay: build fails if libdumbnet-dev is installed in the.. |
| #12106: daq: build fails if libdumbnet-dev is installed in the host |
| #12126: vc4 has neon as hard dependency |
| |
| 2019.02.4, Released July 10th, 2019 |
| |
| Important / security related fixes. |
| |
| arch: x86: Fix typo breaking 'core-avx2' variant, add Westmere |
| variant. |
| |
| linux: Workaround -Werror related build failure on powerpc, |
| by forcing CONFIG_PPC_DISABLE_WERROR on. |
| |
| support/testing: Emulate a machine with 256MB RAM to fix |
| issues with certain tests running out of memory. |
| |
| test-pkg: Correct long option handling and clean output dir |
| after a successful build to save disk space. |
| |
| Ensure custom <pkg>_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS are |
| passed before the standard exclusions so they are not ignored |
| by rsync when using override-srcdir. |
| |
| Defconfigs: QEMU: use 'rootwait' kernel option to ensure root |
| partition is available before mounting. |
| |
| Updated/fixed packages: barebox, bzip2, davfs2, dbus, dialog, |
| docker-cli, docker-engine, expat, faad2, ffmpeg, freeswitch, |
| gerbera, haveged, irssi, libcdadio, libgit2, libglib2, |
| libsecret, libvncserver, lmbench, logrotate, mariadb, meson, |
| mongoose, monit, mpd, openblas, php, postgresql, psplash, |
| python, python-django, python3, qt5base, samba4, taglib, |
| tvheadend, vlc, webkitgtk, xserver_xorg-server, znc |
| |
| 2019.02.3, Released June 7th, 2019 |
| |
| Important / security related fixes. |
| |
| Infra: pkg-config: Use a dedicated timestamp file rather than |
| .config as that gets touched by linux-4.19+, causing repeated |
| builds. |
| |
| check-bin-arch: Also ignore /usr/lib/grub to support merged |
| /usr setups, similar to how /lib/grub is ignored. |
| |
| gnuconfig/config.sub: Add C-SKY architecture support. |
| |
| Updated/fixed packages: assimp, atftp, atop, botan, busybox, |
| ca-certificates, chocolate-doom, cjson, coreutils, cracklib, |
| ddrescue, dhcp, docker-cli, docker-containerd, docker-engine, |
| dosfstools, dovecot, dovecot-pigeonhole, dropbear, exim, |
| ffmpeg, flare-engine, gcc, gdb, gerbera, glibmm, go, gpsd, |
| gst-ffmpeg, gst1-plugins-bad, gst1-plugins-base, imagemagick, |
| intel-microcode, jasper, kf5-kcoreaddons, kismet, libcurl, |
| libglib2, libnss, libopenssl, libsigrok, libssh2, libupnp18, |
| linuxptp, luajit, lynx, matchbox-panel, mender, |
| netcat-openbsd, netsurf, nfs-utils, opus, orc, owfs, |
| pcsc-lite, php, popt, postgresql, python, python-cython, |
| python-django, python-ply, qt5enginio, rpm, runc, samba4, |
| sqlite, subversion, supertux, systemd, tslib, uclibc, |
| v4l2loopback, webkitgtk, woff2 |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11816: Only selected coreutils binaries are installed |
| #11841: grub-efi.cfg not used when building EFI disk image |
| #11911: systemd v240 memory leak in systemd-journald |
| |
| 2019.02.2, Released April 29th, 2019 |
| |
| Important / security related fixes. |
| |
| Only build host-lzip / host-xz when really needed by packages, |
| not just when not available on the build host. |
| |
| fs: Set FAKEROOTDONTTRYCHOWN environment variable to not |
| forward {f,l,}chown calls to libc when running under fakeroot |
| to fix issues when building in restricted environments |
| (E.G. user namespace with bubblewrap). |
| |
| Linux: Also build default make target to ensure extra files |
| like the gdb scripts enabled by CONFIG_GDB_SCRIPTS are also |
| built. Notice: This may mean that extra host utilities like |
| uboot-mkimage are needed. |
| |
| Defconfigs: ASUS tinker and Amarula vyasa rk3822: Support |
| larger kernel images, Atmel SAM5D27, SAM5D2,3,4 xplained: |
| Increase rootfs size to fit utilities, Raspberry Pi 64bit: |
| Include overlays in sdcard image |
| |
| Updated/fixed packages: android-tools, apache, bind, binutils, |
| busybox, civetweb, cjson, copas, davfs2, docker-cli, |
| docker-containerd, docker-engine, dovecot, dovecot-pigeonhole, |
| freerdp, gerbera, ghostscript, git, gnutls, go, gst-omx, |
| gst1-plugins-base, gst1-plugins-ugly, haproxy, hostapd, |
| ipsec-tools, libfreefare, libfuse, libkrb5, libpng, libxml2, |
| libxslt, linknx, linux, linux-firmware, linux-tools, live555, |
| lldp, lrzsz, lynx, madplay, make, minicom, mongodb, msmtp, |
| musl, mutt, neon, netsnmp, numactl, opus, perl, php, |
| postgresql, pure-ftpd, python-urllib3, python3, qt5base, |
| rapidxml, rpm, rsyslog, ruby, runc, samba4, sane-backends, |
| softether, stunnel, sysklogd, syslinux, syslog-ng, |
| systemd-bootchart, thttpd, thrift, tiff, tor, tpm2-tools, |
| tpm2-tss, webkitgtk, yaffs2utils, wget, wpa_supplicant, wsapi, |
| xapp_xfd, xapp_xload, xlib_libXpm, xserver_xorg-server, xz, |
| znc |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11756: package/syslinux: MBR's don't fit because of binutils.. |
| #11761: Building custom kernel 5.1-rc3 or later breaks on objtool |
| |
| 2019.02.1, Released March 29th, 2019 |
| |
| Important / security related fixes. |
| |
| pkg-generic: Only tweak .la files needing it to ensure they |
| are not included in subsequent package file lists. |
| |
| test-pkg: Generate a basic package config if none is |
| specified. |
| |
| Updated/fixed packages: asterisk, avahi, bash, beecrypt, |
| binutils, busybox, clamav, cups, efl, eigen, fetchmail, file, |
| flashrom, fltk, gerbera, git, glibc, gnuradio, go, |
| gst-plugins-bad, intel-gmmlib, jq, kexec, kf5-modemmanager-qt, |
| leveldb, libcurl, libdrm, libftdi1, libglib2, libiio, libpcap, |
| libseccomp, libssh2, log4cplus, lvm2, mariadb, mender, |
| mongodb, mosquitto, musl, nodejs, ntp, openjpeg, owfs, php, |
| pure-ftpd, putty, python-aiojobs, qt5webkit, rdesktop, samba4, |
| sunxi-tools, supertux, swupdate, tpm2-abrmd, tpm2-tss, |
| wavemon, wireshark, vsftpd, xapp_xdm, xen, |
| xdriver_xf86-video-fbdev, xlib_libXdmcp |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11716: Typo on website, saying latest release is 2018.2.11 |
| |
| 2019.02, released March 4th, 2019 |
| |
| Minor fixes. |
| |
| Libressl support added for Qt 5.6 as a replacement for |
| openssl, as 5.6 is not compatible with openssl 1.1.x. |
| |
| Updated/fixed packages: cutelyst, devmem2, gqrx, |
| gst-plugins-bad, libraw, libsoxr, qt5base, runc, systemd, tor |
| |
| 2019.02-rc3, released March 1st, 2019 |
| |
| Fixes all over the tree. |
| |
| Openssl support dropped from Qt 5.6, as it isn't compatible |
| with openssl 1.1.x. |
| |
| Toolchain: GCC 8.x updated to 8.3.0, fixing a number of |
| issues. |
| |
| Dependencies: Require CMake 3.8 or newer to fix compilation |
| issue with certain packages. If not available, host-cmake will |
| instead be built. |
| |
| Printvars: Fix performance regression since 2018.02 |
| |
| Scanypi: Correctly handle underscores in python package names. |
| |
| Updated/fixed packages: botan, clamav, cryptopp, i2pd, |
| ibrcommon, iproute2, libcpprestsdk, libssh, lua-curl, |
| luaexpat, qt5base, runc, stress-ng, syslinux, systemd, |
| upmpdcli, zbar |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #9966: util-linux-2.30/.stamp_built' failed |
| #11696: possible typo in board/pc/post-build.sh |
| |
| 2019.02-rc2, released February 23th, 2019 |
| |
| Fixes all over the tree. |
| |
| Removed zynq_zybo defconfig, as it hasn't seen any update |
| since it was added in 2016, and uses a U-Boot version not |
| compatible with openssl-1.1.x. |
| |
| Linux: Ignore user supplied downloadable hashes, as no hash |
| checksums are available for those. |
| |
| Updated/fixed packages: bind, cryptopp, docker-containerd, |
| dtc, efivar, gdb, imagemagick, ipmiutil, libcpprestsdk, |
| libcurl, libgpiod, libid3tag, libv4l, log4cplus, luvi, |
| madplay, mender, mosquitto, poco, postgresql, proftpd, |
| pulseaudio, python-django, qemu, qt5base, qwt, rabbitmq-c, |
| reaver, safeclip, stress-ng, swupdate, syslog-ng, systemd, |
| tor, unzip, xenomai |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11501: compile sdl2 with enable wayland |
| #11681: .. unable to initialize decompress status for section.. |
| |
| 2019.02-rc1, released February 13th, 2019 |
| |
| Fixes all over the tree and new features. |
| |
| |
| Dependencies: |
| |
| Require Python >= 2.7 as it is needed for E.G. building |
| libglib2. |
| |
| Ensure GNU gzip is used for reproducible tarballs (instead of |
| pigz) |
| |
| |
| Infrastucture: |
| |
| Ensure the PLATFORM and OS environment variables are not set, |
| as they cause build issues for some packages. |
| |
| The package list infrastructure now correctly handles packages |
| installing files with old mtime. |
| |
| Add a config option to force all optional host utilities to be |
| built, even if suitable versions are available on the build |
| machine. |
| |
| graph-build-time: Also show time spent downloading |
| |
| Download: fixes for SSH/SCP support |
| |
| Ensure user provided permissions override permissions from |
| packages. |
| |
| SDK: Fix handling of relative symlinks (targets starting with |
| '.' or '..') |
| |
| BR2_SYSTEM_DEFAULT_PATH setting to customize the default path |
| for processes. |
| |
| The custom skeleton logic will now populate the needed /bin, |
| /lib, /sbin directories/symlinks if not present. Merged /usr |
| can now be used with a custom skeleton. |
| |
| Rootfs overlays can now override symbolic links from |
| packages. This was disabled to ensure the correct symbolic |
| links are present when merged /usr is used. Instead validate |
| that the rootfs overlays do not include invalid /bin, /sbin |
| and /lib entries. |
| |
| The waf infrastructure now support the <pkg>_SUBDIR variable, |
| similar to the other package types. |
| |
| cmake: Also set CMAKE_SYSTEM_VERSION in toolchainfile.cmake |
| |
| Various improvements to the meson infrastructure. |
| |
| Luarocks: A Buildroot addon has been added to automate |
| creating a Buildroot package from luarocks, similar to |
| scancpan and scanpypi. |
| |
| scanpypi: protect against zip-slip vulnerability in zip/tar |
| handling |
| |
| check-package: fix Python 3 support |
| |
| get-developers: Fix behaviour when called from elsewhere than |
| the toplevel directory. |
| |
| pkg-stats: Show latest upstream version of each package, based |
| on data from release-monitoring.org |
| |
| kconfig: Fix for make linux-menuconfig / uboot-menuconfig from |
| a clean tree when ccache is enabled. |
| |
| Default to sha256 password encoding, drop md5 support. |
| |
| |
| Architecture: |
| |
| Support for RISC-V 32bit architecture, ARM A55, 75 and Saphira |
| variants, MIPS support for mips32r3, mips64r3 and Marvell |
| Octeon II/III variants. |
| |
| |
| Toolchain: |
| |
| ARC toolchain 2018.09, ARM 8.2-2018.11, Codescape IMG/MTI MIPS |
| 2018.09-02, MUSL 1.1.21, GCC 6.5.0 / 7.4.0, GDB 8.2.1 |
| |
| |
| Packages: |
| |
| openssl: Bump to 1.1.1x series, bringing TLSv1.3 support and |
| long term support. |
| |
| fftw: Split into fftw-{single,double,long-double,quad} |
| packages for the different data precision options. |
| |
| libcurl: Now has explicit TLS backend selection options. |
| |
| linux: Support building device tree blobs with the -@ option |
| for device tree overlays. |
| |
| weston: The weston-imx i.MX variant is now used when |
| imx-gpu-viv is enabled |
| |
| pkgconf: Update to 1.5.3, which brings support for |
| --define-prefix (used by GStreamer) |
| |
| Add host-python3-setuptools package to handle host python |
| packages needing python3 with setuptools support. |
| |
| |
| New defconfigs: Aarch64 EFI, Orangepi one plus, Orangepi lite |
| 2, QEMU RISC-V 32bit virt, Rock64 |
| |
| |
| New packages: brcm-patchram-plus, clinfo, cunit, docker-cli, |
| erlang-p1-eimp, exempi, fail2ban, fftw-double, |
| fftw-double-long, fftw-quad, fftw-single, gerbera, grpc, |
| gst1-shark, intel-gmmlib, iwd, kf5-kcoreaddons, libeastl, |
| libpackagekite, libtorrent-rasterbar, lua-std-debug, |
| lua-std-normalize, mini-snmpd, netsurf, pamtester, pcm-tools, |
| python-aiodns, python-aiohttp, python-aiohttp-jinja2, |
| python-aiohttp-remotes, python-aiohttp-security, |
| python-aiohttp-session, python-aiohttpd-sse, python-aiojobs, |
| python-cchardet, python-pycares, python-sentry-sdk, |
| python-wtforms, python3-setuptools, rcw, rtc-tools, shim, |
| utp_com, vmtouch, websocketpp |
| |
| Removed packages: fftw, lua 5.2.x, luacrypto, perl-time-hires, |
| python-pyqt, qt, qtuio, tn5250 |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10851: Patch to handle numpad Enter key properly |
| #11066: x11r7 X11 S40xorg leads to a black screen on QEMU x86.. |
| #11126: Bash Shell Programming using Buildroot |
| #11426: pps-tools bash dependency |
| #11476: stdio2.h error invalid use of __builtin_va_arg_pack |
| #11536: dt-utils building fails with glibc 2.28 |
| #11546: open-vm-tools with glibc 2.28 |
| #11566: Fix init script |
| #11576: Unable to start apache with event MPM on raspberry pi 3 |
| #11591: [pkgconf 1.5.3] xserver OpenGL support is missing |
| #11606: libjpeg has no Config.in |
| #11616: 2018.02.09 fails to build libzlib with full RELRO.. |
| #11656: Custom device tree and u-boot boot.scr not integrated.. |
| #11666: Touchscreen with (Py)Qt5 should use tslib instead of evdev |
| |
| 2018.11.4, Released March 28th, 2019 |
| |
| Important / security related fixes. |
| |
| Updated/fixed packages: avahi, beecrypt, binutils, botan, |
| busybox, clamav, cups, devmem2, efl, fetchmail, file, fltk, |
| gcc, gdb, git, go, gst-plugins-bad, iproute2, jq, |
| kf5-modemmanager-qt, leveldb, libopenssl, libraw, libseccomp, |
| libsoxr, libssh2, mariadb, mosquitto, nodejs, ntp, openjpeg, |
| perl, php, putty, qt5webkit, rdesktop, runc, samba4, swupdate, |
| systemd, tor, vsftpd, wireshark, xapp_xdm, xen, xlib_libXdmcp |
| |
| 2018.11.3, Released February 23th, 2019 |
| |
| Important / security related fixes. |
| |
| Ensure the PLATFORM and OS environment variables are not set, |
| as they cause build issues for some packages. |
| |
| The package list infrastructure now correctly handles packages |
| installing files with old mtime. |
| |
| Linux: Skip hash checks for user supplied downloadable |
| patches, as no hash checksums are available for those. |
| |
| scanpypi: protect against zip-slip vulnerability in zip/tar |
| handling |
| |
| Download: fixes for SSH/SCP support |
| |
| SDK: Fix handling of relative symlinks (targets starting with |
| '.' or '..') |
| |
| Updated/fixed packages: bind, dhcpcd, docker-compose, |
| docker-containerd, docker-engine, dovecot, dovecot-pigeonhole, |
| dtc, efivar, ghostscript, gnuradio, imagemagick, jpeg-turbo, |
| libarchive, libb64, libcurl, libgeotiff, libgpiod, libid3tag, |
| libupnp18, log4cplus, madplay, meson, mosquitto, openssh, php, |
| poco, postgresql, proftpd, pulseaudio, python, python-django, |
| python3, qt5base, reaver, runc, sg3_utils, sqlcipher, |
| swupdate, systemd, unzip, webkitgtk, xenomai |
| |
| 2018.11.2, Released January 30th, 2019 |
| |
| Important / security related fixes. |
| |
| Defconfigs: Fixes for imx6slevk, imx7dsabresd, imx8mqevk, Lego |
| EV3, QEMU AArch64-virt |
| |
| Download: Fix scp download handling |
| |
| check-package: fix Python 3 support |
| |
| get-developers: Fix behaviour when called from elsewhere than |
| the toplevel directory. |
| |
| kconfig: Fix for make linux-menuconfig / uboot-menuconfig from |
| a clean tree when ccache is enabled. |
| |
| cmake: Also set CMAKE_SYSTEM_VERSION in toolchainfile.cmake |
| |
| Updated/fixed packages: acpica, apache, apr, avrdude, cargo, |
| cc-tool, dash, dhcpdump, dmalloc, docker-containerd, efivar, |
| fwts, glibc, gnuchess, gnupg2, go, leveldb, libarchive, |
| libassuan, libftdi1, libgpg-error, libhttpparser, libkcapi, |
| libmad, libsndfile, libsquish, liburiparser, libwebsock, |
| libxml2, lighttpd, llvm, lm-sensors, lua-msgpack-native, lxc, |
| mariadb, mbedtls, meson, mosquitto, netatalk, nodejs, odhcp6c, |
| openresolv, openssh, pango, patchelf, php, python-django, |
| python-numpy, python-pyyaml, rauc, rp-pppoe, s6-networking, |
| samba4, sdl_sound, shairport-sync, sqlite, subversion, |
| sunxi-cedarx, swupdate, systemd, tcpreplay, tekui, tmp2-abrmd, |
| tpm2-tools, tpm2-tss, udisks, unixodbc, usb_modeswitch, |
| webkitgtk, wireshark, wolfssl, xapp_rgb, xenomai, xerces |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11576: Unable to start apache with event MPM on raspberry pi 3 |
| |
| 2018.11.1, Released December 20th, 2018 |
| |
| Important / security related fixes. |
| |
| defconfigs: Fixes for bananapi m2 ultra, ci20 |
| |
| Download wrapper: Fix for urlencode handling |
| |
| Updated/fixed packages: asterisk, docker-compose, |
| docker-engine, dt-utils, gnutls, go, grub, libbsd, libcurl, |
| libpgpme, libiscsi, liblo, libmpd, libopenssl, liboping, |
| libpam-tacplus, libpjsip, linux-firmware, liquid-dsp, |
| lua-cqueue, luvi, lxc, lynx, nginx, nodejs, openzwave, php, |
| pps-tools, proftpd, prosody, sdl2_net, squashfs, swupdate, |
| uclibc, vtu, webkitgtk, wine, xen |
| |
| New packages: docker-cli |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11426: pps-tools bash dependency |
| #11536: dt-utils building fails with glibc 2.28 |
| |
| 2018.11, Released December 1st, 2018 |
| |
| Minor fixes. |
| |
| Updated/fixed packages: c-ares, quagga, squid |
| |
| 2018.11-rc3, released November 30th, 2018 |
| |
| Fixes all over the tree. |
| |
| Defconfigs: Fixes for Armadeus APF27, imx6sabre, Olimex A20 |
| olinuxino lime legacy, Orangepi zero plus 2, PC, Riotboard. |
| |
| graph-depends: Fix for package names starting with a non-alpha |
| character. |
| |
| Updated/fixed packages: alsa-utils, botan, dante, domoticz, |
| dtc, freetype, gauche, gcc, gdb, ghostscript, glibc, |
| imx-usb-loader, libbsd, libid3tag, libkrb5, libmicrohttpd, |
| libopenssl, libsoxr, linux, motion, msgpack, mtd, |
| perl-net-ssleay, php, popt, python-numpy, qt5declarative, |
| samba4, shadowsocks-libev, stress-ng, systemd, usb_modeswitch, |
| webkitgtk, valgrind, weston, xfsprogs |
| |
| 2018.11-rc2, released November 21th, 2018 |
| |
| Fixes all over the tree. |
| |
| fs: Drop intermediate tarball from the filesystem handling to |
| fix an issue with xattrs handling related to fakeroot. Ensure |
| tarball target includes xattrs. |
| |
| download: Fix confusion in git submodule handling if dl/ is a |
| symlink. |
| |
| genrandconfig: Fix missing newline in BR2_WGET handling, |
| causing the following line to be ignored. This would affect |
| BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX, BR2_INIT_SYSTEMD, |
| BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV, BR2_STATIC_LIBS or |
| BR2_PACKAGE_PYTHON_PY_ONLY depending on the randomization. |
| |
| show-build-order: Also include the dependencies of |
| rootfs-common. |
| |
| Fix a number of build issues in packages for the recently |
| merged RISC-V architecture support. |
| |
| Updated/fixed packages: dt-utils, easydbus, elfutils, |
| flare-engine, flatcc, glibc, gstreamer, gstreamer1, imx-uuc, |
| libassuan, libcorrect, libiscsi, libkrb5, libmicrohttpd, |
| libnftnl, libnspr, libnss, libsemanage, libsigsegv, libv4l, |
| ltp-testsuite, luv, luvi, make, ncmpc, netplug, openocd, |
| prosody, qemu, rpm, sconeserver, shadowsocks-libev, |
| supertuxcart, syslinux, systemd, trace-cmd, uclibc, |
| uclibc-ng-test, vtun, webkitgtk, weston, wireshark, xen, |
| xlib_libfontenc |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11086: download/git submodule breaks on symlinked dl folder |
| #11216: Capabilities not applied to filesystem |
| |
| 2018.11-rc1, released November 9th, 2018 |
| |
| Fixes all over the tree and new features. |
| |
| Architecture: RISC-V support (64bit) added. |
| |
| Toolchain: Glibc bumped to 2.28. Fortran support for external |
| toolchains. ARM (Linaro) toolchains updated to 8.2-2018.08. |
| |
| Hardening flags (RELRO) are now handled by the toolchain |
| wrapper instead of explicitly through CFLAGS/LDFLAGS, fixing a |
| number of issues. |
| |
| Filesystems: Support for creating btrfs and f2fs filesystems |
| added. |
| |
| Add a number of patches to fix build errors for host utilities |
| on modern distributions using glibc-2.28. |
| |
| mkusers: Ensure existing group members are preserved when a |
| group is reprocessed. |
| |
| printvars: Fix issue with exceeding shell command line length |
| limits for certain setups. |
| |
| Workaround added for incompatibility issues between host-dtc |
| and older U-Boot and Linux kernel versions. |
| |
| Detect and reject build paths containing '@', as this confuses |
| a number of packages, including GCC. |
| |
| utils/diffconfig: Make it work for (non-Buildroot) config |
| files not using the BR2_ prefix. |
| |
| New defconfigs: Amarula a64-relic, Bananapi m2 ultra, Embest |
| riotboard, Hardkernel Odroid XU-4, QEMU riscv64-virt. |
| olimex_a20_olinuxion_lime_mali is renamed to _legacy. |
| |
| OpenCL infrastructure support added, similar to how OpenGL is |
| handled. |
| |
| Linux-headers: Support for kernel headers from a custom |
| tarball / git repo added. |
| |
| New packages: bird, bluez5_utils-headers, btrfs-progs, |
| checksec, davici, duktape, ell, haproxy, libclc, libcorrect, |
| libopencl, libopenresolv, nss-myhostname, |
| perl-apache-logformat-compiler, perl-appconfig, |
| perl-astro-suntime, perl-class-inspector, perl-class-load, |
| perl-class-method-modifiers, perl-class-std, |
| perl-class-std-fast, perl-cookie-baker, perl-data-dump, |
| perl-data-optlist, perl-data-uuid, perl-data-manip, |
| perl-dbd-mysql, perl-dbi, perl-devel-globaldestruction, |
| perl-devel-stacktrace, perl-devel-stacktrace-ashtml, |
| perl-device-serialport, perl-dist-checkconflicts, |
| perl-exporter-tiny, perl-file-sharedir, perl-file-slurp, |
| perl-filesys-notify-simple, perl-hash-multivalue, |
| perl-http-entity-parser, perl-http-headers-fast, |
| perl-http-multipartparser, perl-io-interface, |
| perl-io-socket-multicast, perl-json-maybexs, perl-mime-tools, |
| perl-module-implementation, perl-module-runtime, perl-moo, |
| perl-number-bytes-human, perl-package-stash, perl-params-util, |
| perl-plack, perl-posix-strftime-compiler, perl-role-tiny, |
| perl-streams-buffered, perl-sub-exporter-progressive, |
| perl-sub-install, perl-sub-quote, perl-sys-cpu, |
| perl-sys-meminfo, perl-sys-mmap, perl-time-parsedate, |
| perl-type-tiny, perl-www-form-urlencoded, perl-x10, pigpio, |
| python-async-timeout, python-falcon, python-fire, |
| python-mimeparse, python-multidict, python-passlib, |
| python-pigpio, python-pip, python-ply, python-py, |
| python-pyasn1, python-pyasn1-modules, python-pycryptodomex, |
| python-pyhamcrest, python-pysmi, python-scapy, python-semver, |
| python-serial-asyncio, python-typing, python-uvloop, |
| pythonwrapt, python-yarl, python-zeroconf, riscv-pk, sedutil, |
| spandsp, tini, waffle, xapian |
| |
| Removed packages: bootutils, dsp-tools, expedite, gst-dsp, |
| xloader |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11116: Buildroot should set PYTHON_EGG_CACHE instead of writing .. |
| #11156: In python3 module 'socket' has no attribute 'AF_BLUETOOTH' |
| #11166: Erlang bad argument on valid uint64 when crosscompiled on.. |
| #11206: zlib: fails to build with Linaro toolchain, BR2_RELRO_FULL.. |
| #11241: ACPID shouldn't depend on BR2_x86_64 || BR2_i386 |
| #11251: Util scanpypi failes when package change - to _ in tar file |
| #11266: qt5base-5.11.1 does not compile with musl, complains about.. |
| #11286: python-rpi-gpio only should depend on BR2_arm || BR2_aarch64 |
| #11321: Latest master fails to build readline with RELRO FULL |
| #11326: sysvinit fails to build in latest GIT master |
| #11331: Internal application no longer builds with latest GIT master |
| #11336: nfs-utils fails to build in latest GIT master |
| #11351: build root-2018-08, linaro aarch64 compile error |
| #11376: mdmon binary missing |
| #11391: Valgind availability on ARM |
| #11396: uboot environment image checksum invalid if target is big endian |
| #11421: GCC error message for ARM Cortex-A9/ARM.V7 |
| #11451: Can't find libmpfr.so.4 when using external toolchain on ubuntu.. |
| #11481: Docs: Is external.desc required? |
| |
| 2018.08.4, Released December 20th, 2018 |
| |
| Important / security related fixes. |
| |
| Defconfigs: Fixes for ci20, orangepi zero plus 2 |
| |
| Download wrapper: Fix for urlencode handling |
| |
| Updated/fixed packages: c-ares, dante, docker-compose, |
| domoticz, freetype, ghostscript, gnutls, libcurl, libgpgme, |
| libid3tag, libiscsi, libmpd, libopenssl, liboping, libpjsip, |
| linux-firmware, liquid-dsp, luvi, lynx, msgpack, nginx, |
| nodejs, php, popt, pps-tools, prosody, python-numpy, |
| python-requests, samba4, sdl2_net, squashfs, swupdate, |
| systemd, uclibc, vte, webkitgtk, wine, xfsprogs |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11426: pps-tools bash dependency |
| |
| 2018.08.3, Released November 26th, 2018 |
| |
| Important / security related fixes. |
| |
| fs: Drop intermediate tarball from the filesystem handling to |
| fix an issue with xattrs handling related to fakeroot. Ensure |
| tarball target includes xattrs. |
| |
| download: Fix confusion in git submodule handling if dl/ is a |
| symlink. |
| |
| toolchain: Only allow enabling stack protection on |
| architectures with control flow integrity (CFI) support. Only |
| allow FORTIFY_SOURCE support on gcc >= 6. |
| |
| genrandconfig: Fix missing newline in BR2_WGET handling, |
| causing the following line to be ignored. This would affect |
| BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX, BR2_INIT_SYSTEMD, |
| BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV, BR2_STATIC_LIBS or |
| BR2_PACKAGE_PYTHON_PY_ONLY depending on the randomization. |
| |
| show-build-order: Also include the dependencies of |
| rootfs-common. |
| |
| Defconfigs: Fixes for Armadeus APF27, imx6sabre, Olimex A20 |
| olinuxino lime legacy, Orangepi zero plus 2. |
| |
| graph-depends: Fix for package names starting with a non-alpha |
| character. |
| |
| Updated/fixed packages: attr, audit, bind, brotli, busybox, |
| dtc, easydbus, elfutils, flare-engine, flatcc, gauche, gcc, |
| giflib, gpsd, lcdproc, libcurl, libiscsi, libkcapi, libnfs, |
| libnspr, libnss, libsemanage, liburiparser, lighttpd, |
| lua-curl, mariadb, mmc, mosquitto, mysql, ncmpc, neardal, |
| netplug, network-manager, nfs-utils, nginx, openocd, openswan, |
| p11-kit, postgresql, prosody, qemu, qt, rpm, ruby, samba4, |
| squid, supertuxkart, systemd, tar, trace-cmd, traceroute, |
| twolame, uclibc, usb_modeswitch, vtun, webkitgtk, weston, |
| xdriver_xf86-video-geode, xlib_libfontenc, xserver_xorg-server |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11086: download/git submodule breaks on symlinked dl folder |
| #11481: Docs: Is external.desc required? |
| |
| 2018.08.2, Released October 25th, 2018 |
| |
| Important / security related fixes. |
| |
| Workaround added for incompatibility issues between host-dtc |
| and older U-Boot and Linux kernel versions. |
| |
| Detect and reject build paths containing '@', as this confuses |
| a number of packages, including GCC. |
| |
| utils/get-developers: Add -e option for use with git |
| send-email. |
| |
| utils/diffconfig: Make it work for (non-Buildroot) config |
| files not using the BR2_ prefix. |
| |
| u-boot: Fix for environment image handling on big endian |
| systems. |
| |
| Updated/fixed packages: binutils, ca-certificates, |
| cups-filters, dtc, erlang, file, freetype, gcc, git, gvfs, |
| jasper, leveldb, libarchive, libssh, live555, ljlinenoise, |
| mariadb, mongoose, netsnmp, nmap, nodejs, ntp, open-plc-utils, |
| poco, psmisc, ptpd2, python-enum34, qemu, qt, qt5base, |
| setools, spice, spice-protocol, tinc, ustr, wireshark, |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11396: uboot environment image checksum invalid if target is big endian |
| |
| 2018.08.1, Released October 7th, 2018 |
| |
| Important / security related fixes. |
| |
| Add a number of patches to fix build errors for host utilities |
| on modern distributions using glibc-2.28. |
| |
| mkusers: Ensure existing group members are preserved when a |
| group is reprocessed. |
| |
| printvars: Fix issue with exceeding shell command line length |
| limits for certain setups. |
| |
| Updated/fixed packages: acpid, android-tools, apache, |
| arp-scan, bandwidthd, bind, brltty, clamav, connman, cppcms, |
| domoticz, dtc, fio, gcc, gdb, ghostscript, gnupg, httpping, |
| igmpproxy, imlib2, ipsec-tools, libesmtp, libnfs, libxslt, |
| links, lua, mosquitto, nilfs-utils, ocrad, parted, php, |
| python-django, screen, shairport-sync, strongswan, |
| vboot-utils, webkitgtk, wireguard, x265 xen, xlib_libXdmcp, |
| xlib_libXfont, xlib_libXft, xlib_libxshmfence, |
| xutil_makedepend, zeromq |
| |
| 2018.08, Released September 6th, 2018 |
| |
| Minor fixes. |
| |
| Known issues: |
| |
| - Glibc 2.28 on the build host breaks compilation of a number |
| of host packages. 2018.08 contains fixes for some of these |
| packages, but not all. Consider building on hosts (or in |
| containers) using older Glibc versions. |
| |
| - host-dtc 1.4.7 breaks compilation of older U-Boot and Linux |
| kernel configurations using FDT/DTC. Consider updating the |
| Linux kernel to >= 4.17 and U-Boot to >= 2018.07 or |
| backporting commit 9130ba8846 (scripts/dtc: Update to |
| upstream version v1.4.6-9-gaadd0b65c987) for the Linux |
| kernel / commit db405d1980 for U-Boot. |
| Alternatively revert commit 7b929ddcf0 (dtc: bump version to |
| 1.4.7) and ensure your build host does not have the libfdt |
| development headers installed. |
| |
| Updated/fixed packages: busybox, chipmunk, cutelyst, |
| domoticz, gcc, imagemagick, lcms2, libcurl, mediastreamer, |
| moarvm, php, qt, qt5virtualkeyboard, qt5webengine, screen, |
| sdl2, squashfs, uboot, xen |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11261: ccache using wrong cached objects |
| #11276: Understanding the patch for kernel-4.9 and other.. |
| |
| 2018.08-rc3, Released August 31th, 2018 |
| |
| Fixes all over the tree. |
| |
| linux: additional improvements to the flex / bison dependency |
| handling, use system provided variant if available. Ensure |
| toolchain is available when configuring for 4.18+ support. |
| |
| Download: Fix handling of primary sites using file:// |
| |
| Toolchain: Correct external toolchain musl detection for |
| static toolchains. |
| |
| Updated/fixed packages: aircrack-ng, bison, brltty, busybox, |
| cutelyst, dropbear, gr-osmosdr, i2c-tools, json-c, libconfuse, |
| libkcapi, libsoup, libssh, liburiparser, mbedtls, mender, |
| mesa3d, minicom, mjpegtools, mutt, openpowerlink, openssh, |
| oracle-mysql, php, postgresql, pv, qt5base, qt5quickcontrols, |
| rauc, shairport-sync, systemd, xlib_libX11, zeromq, |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11091: BR2_PRIMARY_SITE doesn't work (wget is selected... |
| #11141: WF111 package no longer available |
| #11211: Internal compiler error: Killed (program cc1plus).. |
| #11236: util-linux fails to build on Travis CI when python.. |
| #11246: Glibc 2.28 - fails to build host-bison and host-m4 |
| #11256: Add python-falcon and python-mimeparse packages |
| |
| 2018.08-rc2, Released August 20th, 2018 |
| |
| Fixes all over the tree. |
| |
| pkg-kconfig: Support dependencies needed to run the |
| configurator, E.G. recent Linux kernel versions needing flex |
| and bison. |
| |
| Defconfigs: ARM Juno: Bump ATF to fix a build |
| issue. Raspberrypi2: Bump rootfs size. Snps_archs38_vdk: |
| Correct /etc/inittab. Technologic ts7680: Correct genimage |
| configuration. Orange PI PC / Zero, Sheevaplug: Bump U-boot to |
| 2018.07 to fix build issue. Ensure host-openssl is pulled in |
| for kernel builds where needed. |
| |
| Updated/fixed packages: aircrack-ng, bind, boost, |
| boot-wrapper-aarch64, bzip2, busybox, chrony, cryptsetup, |
| dahdi-tools, dbus, domoticz, eigen, ipsec-tools, libarchive, |
| libfuse, libgit2, libopenssl, libselinux, lighttpd, lvm2, m4, |
| makedevs, mariadb, mesa3d-headers, mono, ncmpc, ncurses, |
| nodejs, php, python-django, python-pyqt5, qt5base, |
| qt5serialbus, ruby, samba4, uboot-tools, uclibc, vlc, |
| waylandpp, wireless_tools, wireshark, wpa_supplicant, mtd, |
| xdriver_xf86-video-ati, xserver_xorg-server |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10781: cryptsetup luksOpen container_file container causes.. |
| #10996: bogus musl ARM toolchain |
| #11191: xattr and check-package issue |
| |
| 2018.08-rc1, Released August 5th, 2018 |
| |
| Toolchain: |
| |
| - add support for gcc 8.x, switch to gcc 7.x as the default |
| version |
| - add support for gdb 8.1, switch to gdb 8.0 as the default |
| and remove gdb 7.10/7.11 |
| - add support for binutils 2.31 |
| - NIOSII CodeSourcery toolchain updated |
| - Linaro AArch64 BE toolchain added, and other Linaro |
| toolchains updated |
| - Synopsys ARC pre-built toolchain updated |
| |
| Architecture: add support for ARM Cortex-M7 |
| |
| Major updates: |
| |
| - systemd bumped to 239 |
| - Qt5 bumped to 5.11.1 |
| - Rust bumped to 1.27 |
| - GStreamer stack bumped to 1.14.2 |
| - X.org server bumped to 1.20, and all X.org proto packages |
| replaced by the single xorgproto package |
| - i.MX6 support packages bumped to 6.2.4 |
| - i.MX Vivante graphics version bumped to 6.2.4.p1.2, |
| adding support for Wayland and i.MX8MQ platforms |
| |
| Linux: bumped to 4.17 by default. |
| |
| Infrastructure: new package infrastructure added for packages |
| using the Meson build system |
| |
| New packages: at-spi2-atk, at-spi2-core, capnproto, cmocka, |
| corkscrew, cutelyst, davfs2, flatcc, libidn2, libgit2, |
| libopusenc, mender, nghttp2, perl-convert-asn1, perl-crypt-blowfish, |
| perl-crypt-cbc, perl-digest-md5, perl-mime-base64-urlsafe, |
| perl-mojolicious-plugin-authentication, perl-net-ping, |
| perl-net-snmp, perl-net-ssh2, perl-net-telnet, pigz, |
| python-reentry, python-request-id, python-validators, |
| python-webob, shadowsocks-libev, speexdsp, xorgproto, wampcc |
| |
| New defconfigs: NXP i.MX7D SDB, Boundary Devices Nitrogen 8M, |
| Olimex A10 OLinuxino, ZynqMP ZCU106 |
| |
| Removed packages: all xproto_* have been removed and replaced |
| by xorgproto |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #9411: MUSL build with RT Error relocating /lib/libgcc_s.so.1: |
| __cpu_indicator_init: symbol not found |
| #9921: lockfile module within python-daemon not available |
| #10341: gdb install of py files when using buildroot toolchain |
| includes build path |
| #10661: /etc/init.d/S29netplug starts multiple instances of netplugd |
| #10751: Missing dependency in pulseaudio package |
| #10811: kodi-17.6-Krypton does not compile for freescale_* devices |
| #10856: openblas on qemu_x86_64_defconfig fails with |
| "sgemm_kernel.o: No such file or directory" |
| #11056: Compiling a file that uses libdrm headers fails with: |
| fatal error: drm.h: No such file or directory |
| #11061: support/download: git version=master broken |
| #11071: Building postgresql package on Debian 9.4 x64 for armel target fails |
| #11076: Docker containerd installed to incorrect path |
| #11101: host-patchelf Endian Issue with relative RPATH |
| #11111: raspberry pi 3 b+: missing BSP for 64-bit kernel |
| #11121: statfs call corrupts memory struct statfs too small |
| #11181: Switching toolchain does not work |
| |
| 2018.05.3, Released October 6th, 2018 |
| |
| Important / security related fixes. |
| |
| Add a number of patches to fix build errors for host utilities |
| on modern distributions using glibc-2.28. |
| |
| mkusers: Ensure existing group members are preserved when a |
| group is reprocessed. |
| |
| printvars: Fix issue with exceeding shell command line length |
| limits for certain setups. |
| |
| Updated/fixed packages: acpid, android-tools, apache, |
| arp-scan, bandwidthd, bind, bison, brltty, chipmunk, connman, |
| cppcms, fio, gcc, ghostscript, gnupg, httping, igmpproxy, |
| imagemagick, imlib2, ipsec-tools, lcm2, libcurl, libesmtp, |
| libnfs, libssh, libxslt, links, mediastreamer, minicom, |
| moarvm, nilfs-utils, ocrad, parted, php, postgresql, pv, |
| python-django, qt, qt5quickcontrols, qt5webengine, screen, |
| sdl2, shairport-sync, squashfs, strongswan, vboot-utils, |
| webkitgtk, wireguard, x265, xen, xlib_libXfont, xlib_libXft, |
| xlib_libxshmfence, zeromq |
| |
| 2018.05.2, Released August 28th, 2018 |
| |
| Important / security related fixes. |
| |
| Defconfigs: Raspberrypi2: Bump rootfs size, T7680: Fix |
| genimage.cfg issue, ARM Juno: Bump ATF to v1.3 to fix build |
| issue. |
| |
| Updated/fixed packages: acl, attr, apache, bind, |
| boot-wrapper-aarch64, brltty, bzip2, chrony, crda, cryptsetup, |
| dahdi-tools, dmidecode, dropbear, eigen, ffmpeg, gawk, gcc, |
| ghostscript, gnutls, imx-gpu-viv, ipsec-tools, libarchive, |
| libfuse, libglib2, libopenssl, libselinux, libsoup, lighttpd, |
| linuxptp, lttng-modules, lttng-tools, lua-flu, lvm2, m4, |
| makedevs, mariadb, mbedtls, mesa3d-heders, mtd, ncurses, |
| nodejs, openssh, php, python-django, rauc, ruby, samba4, |
| stress-ng, ti-utils, uboot-tools, uclibc, vim, waylandpp, |
| wireless_tools, wireless-regdb, wireshark, wpa_supplicant, |
| xorriso, znc |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10781: cryptsetup luksOpen container_file container causes.. |
| #10986: Installing package attr when already supplied by.. |
| #11191: xattr and check-package issue |
| |
| 2018.05.1, Released July 20th, 2018 |
| |
| Important / security related fixes. |
| |
| U-Boot: Ensure host version of ncurses is picked up and not |
| host-ncurses built by buildroot, as that otherwise causes |
| widechar/non-widechar conflicts and corrupted menuconfig |
| menus. |
| |
| Linux: Enable CONFIG_PERF_EVENTS when perf is enabled. |
| |
| Toolchain: ARC tools updated to arc-2018.03. |
| |
| pkg-stats: Fix python 3.x compatibility. |
| |
| dl-wrapper: Fix support for URIs containing '+', fix |
| no-check-hash for inferred site method. |
| |
| Defconfigs: Raspberrypi3: Bump rootfs size, Minnowboard-max: |
| Support ethernet on Turbot variant. |
| |
| Updated/fixed packages: audit, bind, btrfs-progs, cifs-utils, |
| clamav, collectd, coreutils, docker-containerd, dos2unix, |
| edid-decode, file, gcc, gdb, gnupg, gnupg2, heimdal, hidapi, |
| imagemagick, libcurl, libgcrypt, libglib2, liblogging, |
| libostree, libressl, libsoup, libv4l, libvncserver, libvorbis, |
| libwebsockets, libxslt, lm-sensors, mariadb, mpg123, ncurses, |
| network-manager, nodejs, patchelf, perl, php-amqp, pinentry, |
| pixiewps, qpdf, qt53d, qt5base, qt5charts, qt5script, redis, |
| systemd, triggerhappy, uboot, wireguard, wireless-regdb, |
| wireshark |
| |
| 2018.05, Released June 1st, 2018 |
| |
| Minor fixes. |
| |
| Download: Work around for hanging connections for packages |
| from CVS, by adding a 10 minute max timeout. |
| |
| Updated/fixed packages: binutils, clang, dash, expect, git, |
| glibc, jpeg-turbo, libjpeg, log4cplus, openvmtools, xen, |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11051: runtime issue on STM32 with usage of binutils 2.29.x |
| |
| 2018.05-rc3, Released May 28th, 2018 |
| |
| Fixes all over the tree. |
| |
| Toolchain: ARC tools updated to arc-2018.03-rc2. |
| |
| Fs: Ensure hard links in TARGET_DIR are correctly copied for |
| filesystem input. With the recent changes to the file system |
| generation logic, hard links were "expanded" in file system |
| images leading to bloated rootfs images for setups with hard |
| links. |
| |
| Infrastructure: Error out for packages using the 'local' |
| method but forgetting to specify <pkg>_SITE. |
| |
| Build rpcgen for the host when needed to support distributions |
| no longer shipping rpcgen with glibc (E.G. recent Fedora). |
| |
| Updated/fixed packages: autofs, bash-completion, binutils, |
| busybox, cjson, elf2flt, libcoap, libcurl, libtirpc, lrzsz, |
| poppler, procps-ng, qt-webkit-kiosk, quota, samba4, xfsprogs |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11031: ld-elf2flt: host/bin/ld.real': execvp: No such file.. |
| #11036: C compiler cannot create executables |
| #11046: Git package binaries are ~180MB (compared to ~20MB in.. |
| |
| 2018.05-rc2, Released May 22nd, 2018 |
| |
| Fixes all over the tree. |
| |
| Dependencies: Check that the current working directory (.) |
| isn't listed in PATH as that causes various build issues. |
| |
| Manual: Clarify that git branch names may not be used as |
| version identifiers. This has never been supported, but was |
| kind of working (with some limitations) before the git |
| download rework - Now it does not work at all. |
| |
| Linux: Ensure host version of ncurses is picked up and not |
| host-ncurses built by buildroot, as that otherwise causes |
| widechar/non-widechar conflicts and corrupted menuconfig |
| menus. |
| |
| Packages: Renamed a number of package options not prefixed |
| with BR2_PACKAGE_<pkg> for consstency. |
| |
| Download infrastructure: Fix file:// protocol handling after |
| download rework. |
| |
| Updated/fixed packages: acl, apr-util, asterisk, attr, |
| bluez5_utils, cifs-utils, clamav, clang, cups-filters, |
| dahdi-linux, exim, faketime, gdb, go, gst1-plugins-bad, |
| imx-mkimage, ipsec-tools, jamvm, janus-gateway, |
| jquery-ui-themes, libcap, libcurl, libftdi, libkcapi, libkrb5, |
| libmediaart, libmodbus, libmodplug, libmpd, |
| libnetfilter_cthelper, libnetfilter_cttimeout, libnfc, |
| libnfnetlink, libnss, liboauth, libogg, libosip2, |
| libpam-radius-auth, libpcap, libpciaccess, llvm, log4cplus, |
| ltrace, lynx, mbedtls, modem-manager, nfs-utils, |
| python-cython, python-websockets, qt5cinex, qt5wayland, rauc, |
| snort, strace, ti-sgx-km, transmission, wavpack, wget, woff2, |
| xen, zmqpp, znc, zstd |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10986: Installing package attr when already supplied by... |
| #11011: BUildroot for Raspberry Pi 2 |
| #11016: Wrong compiler used for external user host packages |
| |
| 2018.05-rc1, Released May 9th, 2018 |
| |
| Toolchain: glibc bumped to 2.27, musl bumped to 1.1.19, |
| uClibc-ng 1.0.30, Linux kernel headers bumped to 4.16.x. |
| |
| Architecture: support for the Blackfin architecture has been |
| removed, as it was removed from Linux upstream, poorly |
| maintained in binutils/gdb, and abandoned by Analog Devices. |
| |
| Numerous packages updated to have hashes for their license |
| files. |
| |
| Systemd can now be built with uClibc toolchains. |
| |
| Linux: addition of BR2_LINUX_KERNEL_NEEDS_HOST_LIBELF and |
| BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL to support building Linux |
| kernel configurations that need libelf on the host or openssl |
| on the host. |
| |
| Coding style: |
| - all Python scripts are now verified with flake8 |
| - check-package extended to check all Config.in and .mk files |
| in tree, not only the ones in package/ |
| |
| Infrastructure: |
| |
| - The download infrastructure has seen a major overhaul, with |
| the main visible new feature being Git caching: a package |
| fetched from Git no longer needs to be re-cloned entirely |
| everytime its version is changed. Anoter visible change is |
| that the download folder now has subfolders per package. See |
| http://lists.busybox.net/pipermail/buildroot/2018-April/217923.html |
| for more details about those changes. |
| |
| - The logic that generates the root filesystem images has been |
| reworked, with the main goal of allowing several filesystem |
| images to be produced in parallel, also a requirement for |
| top-level parallel build. Now, a .tar filesystem image is |
| always created, and re-extracted in a private directory to |
| create each format-specific filesystem image. |
| |
| - A new package infrastructure was introduced for Go-based |
| packages: golang-package. |
| |
| - Dependencies on extraction tools are now handled as proper |
| per-package dependencies, using |
| <pkg>_EXTRACT_DEPENDENCIES. Beyond a cleanup, this is also a |
| preparation step for top-level parallel build support. |
| |
| - When a file being downloaded is part of a package with a |
| .hash file, but there is no hash listed for this file, the |
| file is now preserved in the download directory rather than |
| removed. This helps when updating a package, as it gives the |
| ability to easily calculate the hash of the file. |
| |
| - Addition of '<pkg>-show-recursive-depends' and |
| '<pkg>-show-recursive-rdepends' make targets, to |
| respectively display the recursive list of dependencies and |
| the recursive list of reverse dependencies of a given |
| package. |
| |
| - The /etc/shells file is now automatically generated with the |
| list of shell programs installed on the system. |
| |
| - Addition of -Ofast optimization level as an available |
| option. |
| |
| Major updates: Go updated to 1.10, Erlang bumped to 20.3, Qt5 |
| bumped to 5.10.1. |
| |
| New packages: 18xx-ti-utils, abootimg, bluez-alsa, brotli, |
| chipmunk, clang, docker-compose, docker-proxy, flare-engine, |
| flare-game, gst1-interpipe, gstreamer1-editing-services, |
| hackrf, i2pd, imx-alsa-plugins, imx-mkimage, libcdio-paranoia, |
| libkrb5, llvm, pixiewps, python-backports-ssl-match-hostname, |
| python-cached-property, python-cython, python-docker, |
| python-dockerpty, python-docker-pycreds, |
| python-flask-sqlalchemy, python-functools32, python-influxdb, |
| python-json-models, python-libusb1, python-networkx, |
| python-psycopg2, python-pymodbus, python-sqlalchemy, |
| python-subprocess32, python-texttable, |
| python-websocket-client, python-yieldfrom, quotatool, reaver, |
| snort, sunxi-mali-mainline, sunxi-mali-mainline-driver, tk, |
| tpm2-abrmd, tpm2-tools, tpm2-tss, udftools, vte, woff2. |
| |
| New defconfigs: ARC HS Development Kit, Arcturus ucls1012a, |
| Freescale i.MX6UL EVK (with vendor kernel), Freescale i.MX6 |
| SoloLite EVK (with vendor kernel), Freescale i.MX31 3Stack, |
| Freescale i.MX8Q EVK Freescale p1025twr, Freescale t1040d4rdb, |
| Qemu PPC64 E5500, SolidRun ClearFog Base, Tinker RK3288, Vyasa |
| RK3288, |
| |
| Removed packages: iqvlinux, kodi-adsp-*, mplayer |
| |
| Removed defconfigs: ci40, firefly_rk3288, |
| freescale_p1010rdb_pa, freescale_mpc8315erdb, riotboard, |
| teliv_evk_pro3 |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10151: toolchain eclipse register : fails with a custom |
| BR2_HOST_DIR |
| #10511: Packages get downloaded uncompressed with wget |
| #10531: QtWebengine doesn't build if the host hasn't a 32 bits |
| C++ compiler working |
| #10846: error in compiling gnutls |
| #10886: openssl-1.0.2n fails to build |
| #10896: /bin/sh not in /etc/shells |
| #10961: Grub2 fails to build for x86_64 when BR2_SSP_ALL is |
| enabled |
| |
| 2018.02.12, Released March 29th, 2019 |
| |
| Important / security related fixes. |
| |
| Updated/fixed packages: avahi, beecrypt, busybox, clamav, |
| cups, devmem2, fetchmail, file, fltk, gcc, gdb, git, jq, |
| leveldb, libopenssl, libraw, libseccomp, libssh2, |
| libunistring, mariadb, mosquitto, nodejs, ntp, openjpeg, perl, |
| php, putty, qt5webkit, rdesktop, systemd, wireshark, vsftpd, |
| xapp_xdm, xlib_libXdmcp |
| |
| 2018.02.11, Released February 23th, 2019 |
| |
| Important / security related fixes. |
| |
| Ensure the PLATFORM and OS environment variables are not set, |
| as they cause build issues for some packages. |
| |
| The package list infrastructure now correctly handles packages |
| installing files with old mtime. |
| |
| Linux: Skip hash checks for user supplied downloadable |
| patches, as no hash checksums are available for those. |
| |
| scanpypi: protect against zip-slip vulnerability in zip/tar |
| handling |
| |
| Updated/fixed packages: bind, dhcpcd, dovecot, ghostscript, |
| gnuradio, imagemagick, jpeg-turbo, libarchive, libb64, |
| libcurl, libid3tag, madplay, mosquitto, openssh, php, |
| postgresql, proftpd, python, python-django, python3, qt5base, |
| sqlcipher, swupdate, systemd, unzip, webkitgtk |
| |
| 2018.02.10, Released January 31th, 2019 |
| |
| Important / security related fixes. |
| |
| Defconfigs: Fixes for Lego EV3, QEMU AArch64-virt |
| |
| check-package: fix Python 3 support |
| |
| get-developers: Fix behaviour when called from elsewhere than |
| the toplevel directory. |
| |
| cmake: Also set CMAKE_SYSTEM_VERSION in toolchainfile.cmake |
| |
| Updated/fixed packages: acpica, apache, apr, asterisk, |
| avrdude, cargo, cc-tool, dash, dhcpdump, dmalloc, gnuchess, |
| gnupg2, leveldb, libarchive, libassuan, libftdi1, |
| libgpg-error, libhttpparser, libmad, libsndfile, libsquish, |
| liburiparser, libwebsock, libxml2, lighttpd, lm-sensors, |
| lua-msgpack-native, mbedtls, mosquitto, netatalk, nodejs, |
| openssh, pango, patchelf, php, python-django, python-pyyaml, |
| rauc, rp-pppoe, s6-networking, samba4, sdl_sound, |
| shairport-sync, sqlite, subversion, sunxi-cedarx, tcpreplay, |
| tekui, usb_modeswitch, webkitgtk, wireshark, wolfssl, |
| xapp_rgb, xenomai, xerces |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11576: Unable to start apache with event MPM on raspberry pi 3 |
| |
| 2018.02.9, Released December 20th, 2018 |
| |
| Important / security related fixes. |
| |
| defconfigs: Fixes for ci20 |
| |
| Updated/fixed packages: c-ares, dante, freetype, ghostscript, |
| glibc, gnutls, go, libcurl, libgpgme, libid3tag, libiscsi, |
| libmpd, libopenssl, libpjsip, linux, liquid-dsp, luvi, lynx, |
| msgpack, nginx, nodejs, php, popt, pps-tools, python-numpy, |
| python-requests, samba4, sdl2_net, squashfs, swupdate, uclibc, |
| wine, webkitgtk, xfsprogs |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11426: pps-tools bash dependency |
| |
| 2018.02.8, Released November 26th, 2018 |
| |
| Important / security related fixes. |
| |
| fs: Drop intermediate tarball from the filesystem handling to |
| fix an issue with xattrs handling related to fakeroot. Ensure |
| tarball target includes xattrs. |
| |
| download: Fix confusion in git submodule handling if dl/ is a |
| symlink. |
| |
| toolchain: Only allow enabling stack protection on |
| architectures with control flow integrity (CFI) support. Only |
| allow FORTIFY_SOURCE support on gcc >= 6. |
| |
| genrandconfig: Fix missing newline in BR2_WGET handling, |
| causing the following line to be ignored. This would affect |
| BR2_ENABLE_DEBUG, BR2_INIT_BUSYBOX, BR2_INIT_SYSTEMD, |
| BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV, BR2_STATIC_LIBS or |
| BR2_PACKAGE_PYTHON_PY_ONLY depending on the randomization. |
| |
| show-build-order: Also include the dependencies of |
| rootfs-common. |
| |
| Defconfigs: Fixes for Armadeus APF27, imx6sabre. |
| |
| graph-depends: Fix for package names starting with a non-alpha |
| character. |
| |
| Updated/fixed packages: attr, audit, bind, brotli, easydbus, |
| elfutils, gauche, gcc, giflib, gpsd, lcdproc, libcurl, |
| libiscsi, libnfs, libnspr, libnss, libkcapi, libsemanage, |
| liburiparser, lighttpd, linux, lua-curl, mariadb, mmc-utils, |
| mosquitto, mysql, neardal, netplug, network-manager, |
| nfs-utils, nginx, openocd, openswan, p11-kit, postgresql, |
| prosody, qemu, qt, rpm, ruby, samba4, squid, supertuxkart, |
| systemd, tar, trace-cmd, traceroute, twolame, uclibc, |
| usb_modeswitch, vtun, webkitgtk, xdriver_xf86-video-geode, |
| xlib_libfontenc, xproto_inputproto, xserver_xorg-server |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11086: download/git submodule breaks on symlinked dl folder |
| #11251: Util scanpypi failes when package change - to _ in.. |
| #11476: stdio2.h error invalid use of __builtin_va_arg_pack |
| #11481: Docs: Is external.desc required? |
| |
| 2018.02.7, Released October 25th, 2018 |
| |
| Important / security related fixes. |
| |
| Detect and reject build paths containing '@', as this confuses |
| a number of packages, including GCC. |
| |
| utils/get-developers: Add -e option for use with git |
| send-email. |
| |
| utils/diffconfig: Make it work for (non-Buildroot) config |
| files not using the BR2_ prefix. |
| |
| u-boot: Fix for environment image handling on big endian |
| systems. |
| |
| Updated/fixed packages: binutils, ca-certificates, |
| cups-filters, erlang, file, freetype, gcc, git, gvfs, leveldb, |
| libarchive, libcurl, libssh, live555, ljlinenoise, mariadb, |
| mongoose, netsnmp, nmap, nodejs, ntp, open-plc-utils, poco, |
| psmisc, ptpd2, python-enum34, qemu, qt, qt5base, setools, |
| spice, spice-protocol, tinc, ustr, wireshark |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11396: uboot environment image checksum invalid if target is big endian |
| |
| 2018.02.6, Released October 7th, 2018 |
| |
| Important / security related fixes. |
| |
| Add a number of patches to fix build errors for host utilities |
| on modern distributions using glibc-2.28. |
| |
| mkusers: Ensure existing group members are preserved when a |
| group is reprocessed. |
| |
| printvars: Fix issue with exceeding shell command line length |
| limits for certain setups. |
| |
| Updated/fixes packages: acpid, android-tools, apache, |
| arp-scan, bandwidthd, bind, bison, clamav, connman, cppcms, |
| cramfs, fio, gcc, ghostscript, glibc, gnupg, httping, |
| igmpproxy, imagemagick, imlib2, ipsec-tools, lcms2, libcurl, |
| libesmtp, libnfs, libssh, libxslt, links, linuxptp, |
| mediastreamer, minicom, moarvm, nilfs-utils, ocrad, parted, |
| php, pv, python-django, qt, qt5quickcontrols, qt5webengine, |
| screen, sdl2, shairport-sync, squashfs, strongswan, |
| vboot-utils, webkitgtk, wireguard, x265, xen, xlib_libXfont, |
| xlib_libXft |
| |
| New packages: brotli, woff2 |
| |
| 2018.02.5, Released August 29th, 2018 |
| |
| Important / security related fixes. |
| |
| Defconfigs: Raspberrypi2: Bump rootfs size, T7680: Fix |
| genimage.cfg issue, ARM Juno: Bump ATF to v1.3 to fix build |
| issue. |
| |
| Updated/fixed packages: acl, apache, attr, bind, |
| boot-wrapper-aarch64, brltty, bzip2, chrony, crda, cryptsetup, |
| dahdi-tools, dmidecode, dropbear, eigen, erlang, ffmpeg, gawk, |
| gcc, ghostscript, gnutls, ipsec-tools, libarchive, libfuse, |
| libopenssl, libselinux, libsoup, lighttpd, linuxptp, |
| lttng-modules, lttng-tools, lua-flu, lvm2, m4, makedevs, |
| mariadb, mbedtls, mesa3d-headers, mtd, ncurses, nodejs, |
| openssh, php, postgresql, python-django, qt5xmlpatterns, ruby, |
| samba4, shairport-sync, stress-ng, ti-utils, uboot-tools, vim, |
| waylandpp, wireless_tools, wireshark, wpa_supplicant, xorriso, |
| znc |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10781: cryptsetup luksOpen container_file container causes.. |
| #10986: Installing package attr when already supplied by.. |
| #11191: xattr and check-package issue |
| |
| 2018.02.4, Released July 21th, 2018 |
| |
| Important / security related fixes. |
| |
| U-Boot: Ensure host version of ncurses is picked up and not |
| host-ncurses built by buildroot, as that otherwise causes |
| widechar/non-widechar conflicts and corrupted menuconfig |
| menus. |
| |
| Linux: Enable CONFIG_PERF_EVENTS when perf is enabled. |
| |
| Defconfigs: Raspberrypi3: Bump rootfs size, Minnowboard-max: |
| Support ethernet on Turbot variant. |
| |
| Updated/fixed packages: bind, clamav, collectd, dos2unix, |
| edid-decode, gcc, gdb, heimdal, hidapi, imx-gpu-viv, libcurl, |
| libglib2, liblogging, libostree, libsoup, libv4l, lm-sensors, |
| ncurses, network-manager, patchelf, pinentry, procps-ng, qpdf, |
| qt5, qt53d, qt5base, qt5charts, qt5script, qt5serialport, |
| systemd, wireguard, wireless-regdb |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #11101: host-patchelf Endian Issue with relative RPATH |
| |
| 2018.02.3, Released June 18th, 2018 |
| |
| Important / security related fixes. |
| |
| Various fixes for building on modern distributions (GCC 8.x, |
| no rpcgen utility). |
| |
| ARM: Default to binutils 2.28 and warn about newer binutils |
| versions, which are known to cause boot failures for Linux |
| kernels built in thumb mode. |
| |
| Busybox/mdev: Fix module autoloading. |
| |
| Busybox/sysvinit: inittab: Add /dev/{stdin,stdout,stderr} |
| symlinks, call swapon -a to activate any configured swap |
| devices. |
| |
| Dependencies: Check that PATH does not contain current working |
| directory, which triggers a number of build failures. |
| |
| Infrastructure: Error out for packages erroneously using the |
| 'local' site method but not defining a _SITE. |
| |
| Linux: Fix cuImage.<dtb> / simpleImage.<dtb> handling. Ensure |
| kconfig uses ncurses from the host to fix a ncurses/ncursesw |
| mixup, causing menuconfig display corruption. |
| |
| Toolchain: Workarounds for fix-rpath issues with binutils and |
| elf2flt. |
| |
| Util-linux: Fix blocking on getrandom() issue with recent |
| kernels. |
| |
| Remove broken freescale_imx31_3stack, |
| freescale_imx6sololiteevk and freescale_imx6ulevk defconfigs. |
| |
| Updated/fixed packages: apr-util, asterisk, attr, audit, |
| autofs, binutils, busybox, cifs-utils, cups-filters, dash, |
| ebtables, exim, expect, f2fs-tools, faketime, file, gdb, git, |
| glibc, gnupg, gnupg2, gst1-plugins-bad, imagemagick, jamvm, |
| jpeg-turbo, libcap, libcoap, libcurl, libgcrypt, libjpeg, |
| libnss, libressl, libtirpc, libvncserver, libvorbis, libxslt, |
| log4cplus, lrzsz, ltrace, lynx, mariadb, mbedtls, mpg123, |
| nasm, netplug, network-manager, nfs-utils, nodejs, |
| openvmtools, patch, perl, php-amqp, poppler, procps-ng, |
| python, python-websockets, quota, redis, samba4, sysvinit, |
| transmission, triggerhappy, util-linux, wavpack, wget, |
| wireshark, xen, zmqpp |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10986: Installing package attr when already supplied by busybox.. |
| #11031: ld-elf2flt: host/bin/ld.real': execvp: No such file or.. |
| |
| 2018.02.2, Released May 4th, 2018 |
| |
| Important / security related fixes. |
| |
| Tweak package size/file instrumentation to better handle |
| package rebuilds. |
| |
| Revert /etc/shells creation when bash is enabled. |
| |
| Exclude /lib/firmware from the rpath fixup logic, as it may |
| contain non-native ELF files. |
| |
| Scanpypi: Support the new PyPi infrastructure. |
| |
| Handle GCC 8.x on the host. |
| |
| Ensure timestamp of /usr is updated to support the systemd |
| ConditionNeedsUpdate option. |
| |
| Updated/fixed packages: bluez5_utils, flann, gdb, gnupg2, |
| grub2, libcec, libcgi, libglib2, libgpg-error, libgpgme, |
| libtomcrypt, mbedtls, mkpasswd, php, python, python-requests, |
| python-watchdog, qt53d, qt5websockets, sdl2, sdl2_image, |
| syslog-ng, systemd, tcl, tcllib, uclibc, usb_modeswitch, |
| wireguard, wmctrl |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10896: /bin/sh not in /etc/shells |
| #10961: Grub2 fails to build for x86_64 when BR2_SSP_ALL is enabled |
| |
| 2018.02.1, Released April 9th, 2018 |
| |
| Important / security related fixes. |
| |
| Removed unmaintained defconfigs: Creator Ci40, Firefly rk3288, |
| Freescale mpc8315erdb / p1010rdb_pa, Riotboard, Teliv EVK |
| Pro3. |
| |
| Infrastructure: Speed up instrumentation for package size by |
| comparing timestamps instead of md5 checksums, as doing |
| checksums could lead to up to 25% longer build time for big |
| configurations. |
| |
| Rename the internal <pkg>_BASE_NAME variable to <pkg>_NASENAME |
| to avoid name clashes with packages ending on '-base'. |
| |
| Add a better fix for build issues for autotools based packages |
| checking for C++ support on toolchains without C++ support. |
| |
| Build host-tar if tar is older than 1.27 on the build machine |
| to work around reproducibility issues with git archives |
| containing long paths. |
| |
| check-unique-files: Fix for filenames not representable in the |
| users' locale. |
| |
| Check-bin-arch: Add support for per-package ignore paths |
| (<pkg>_BIN_ARCH_EXCLUDE). |
| |
| Toolchain: Fix SSP support detection for external toolchains. |
| |
| linux: Add _NEEDS_HOST_OPENSSL / LIBELF options to ensure |
| these dependencies are available for Linux configurations |
| needed these dependencies, similar to how it is done for |
| U-Boot. |
| |
| Support custom (not in tree) device tree files in addition to |
| in-tree ones. |
| |
| U-Boot / uboot-tools: Fix header conflict with libfdt-devel |
| installed on host. |
| |
| Updated/fixed packages: apache, busybox, c-ares, cmake, |
| docker-engine, enlightenment, eudev, fbgrab, freescale-imx, |
| gtest, imagemagick, intel-microcode, irssi, jimtcl, kmod, |
| kodi, ktap, libcoap, libcurl, libfcgi, libhttpparser, |
| libminiupnpc, libopenssl, libpjsip, libss7, libssh2, libupnp |
| libupnpp, libuv, libvorbis, memcached, motion, musl, nodejs, |
| ntp, openblas, opencv3, openocd, opus-tools, patch, php, |
| pkgconf, postgresql, powerpc-utils, python-jsonschema, |
| python-webpy, qemu, qt5bsae, qt5script, qt5webkit, rapidjson, |
| rauc, sam-ba, samba4, sngrep, systemd, tremor, uboot-tools, |
| uclibc-ng-test, upmpdcli, wireshark, xerces, xterm, zstd |
| |
| New packages: docker-proxy, python-functools32 |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10766: upmpdcli: Segmentation fault |
| #10776: ktap fails to build |
| #10846: error in compiling gnutls |
| #10856: openblas on qemu_x86_64_defconfig fails with "sgemm_.. |
| |
| 2018.02, Released March 4th, 2018 |
| |
| Fixes all over the tree. |
| |
| Issues with systemd with a readonly rootfs and DBus fixed. |
| |
| Instructure: |
| - check-uniq-files: fix Python 2.6 compatibility. |
| - dependencies.sh: check for external argparse module for |
| Python 2.6. |
| - Add infrastructure to detect and use a UTF-8 locale on the |
| host, needed by systemd. |
| |
| Update/fixed packages: clamav, dash, dhcp, dovecot, efl, |
| ffmpeg, libv4l, mono, mosquitto, php, postgresql, qt, |
| scanpypi, sdl2, systemd, tor, tvheadend, uboot, wavpack |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10831: qemu_x86_64_defconfig build fails on linux-headers.. |
| |
| 2018.02-rc3, Released February 27th, 2018 |
| |
| Fixes all over the tree. |
| |
| check-bin-arch: skip /lib/modules to allow 32-bit userland |
| with 64bit kernel. |
| |
| dependencies: Blacklist tar 1.30+ and build our own host-tar |
| if needed as tar 1.30+ changed the --numeric-owner output for |
| long path names. Build host-tar before other host-dependencies |
| as they need it to extract their source tarballs. |
| |
| Update/fixed packages: asterisk, azmq, bluez5_utils, domoticz, |
| e2fsprogs, erlang, exim, glibc, gpsd, jq, libglib2, libvorbis, |
| mariadb, mbedtls, mesa3d, mesa3d-headers, mpv, patch, pcre2, |
| php, qt5, qt5multimedia, qt5wayland, qt5webengine, qt5webkit, |
| systemd, quagga, rustc, uboot, wireguard, zic, zlib-ng |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10726: Current libglib2.mk creates broken libglib2 binary... |
| #10786: Linux fails to build unless make linux-menuconfig... |
| #10796: Cannot generate cpio image without selecting CON... |
| |
| 2018.02-rc2, Released February 15th, 2018 |
| |
| Fixes all over the tree. |
| |
| Dependencies: Ensure C++ support is available like for C |
| support for packages needing 32bit host support. |
| |
| utils/genrandconfig: Check host dependencies for config. |
| |
| Updated/fixed packages: busybox, dnsmasq, dropbear, ffmpeg, |
| glibc, keepalived, libcpprestsdk, libgpiod, libmaxminddb, |
| librsvg, libtasn1, libv4l, libxml2, lightning, ltp-testsuite, |
| mesa3d, mesa3d-demos, mesa3d-headers, nftables, open-lldp, |
| php, postgresql, python-crossbar, qt5, qt53d, qt5enginio, |
| qt5tools, qt5webengine, qt5webkit, rsync, rust-bin, rustc, |
| systemd |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #9781: ti-sgx-km build on kernel >4.1 |
| #10141: Squashfs extended attribute failures |
| |
| 2018.02-rc1, Released February 5th, 2018 |
| |
| The global source-check and per-package <pkg>-source-check |
| targets have been removed. |
| |
| Architecture: Add x86 Silvermont variant. Add several new ARM |
| variants, rework MIPS NaN logic. Support mainline binutils/gcc |
| for ARC. |
| |
| Toolchains: Linaro toolchains upgraded to 2017.11 release, ARC |
| external toolchains upgraded to arc-2017.09. Libatomic is now |
| also copied for external musl based toolchains. |
| Add binutils 2.30.x and switch to binutils 2.29.x by default. |
| |
| Added hardening options to build with RELRO and FORTITY. |
| |
| New defconfigs: Bananapi M64, FriendlyARM Nanopi A64 & NEO2, |
| imx6slevk, imx6sx-sdb, imx6ulevk, Olimex A64-OLinuXino, |
| Orangepi lite / pc plus / pc / prime / win / win plus / zero |
| plus2, Pine64, Solidrun MacchiatoBin. Sopine. |
| |
| Add utils/diffconfig, a simple utility for comparing |
| configuration files - Adapted from the version in the |
| Linux kernel. |
| |
| Infrastructure: Check that the same file is not touched by |
| multiple packages, as a preparation for toplevel parallel |
| builds. |
| |
| Hashes for the license files for a large number of packages |
| have been added, ensuring that license changes will not be |
| missed when packages are bumped. |
| |
| Fix build issue for autotools based packages checking for C++ |
| support on toolchains without C++ support and on a distro |
| lacking /lib/cpp (E.G. Arch Linux). |
| |
| Support for the meson build system. |
| |
| Pie charts generated by 'graph-build' or 'graph-size' are now |
| sorted according to the size of each piece. |
| |
| System: Only show getty options when busybox init or sysvinit |
| are used. |
| |
| ARM-trusted-firmware: Support ATF bundled in U-Boot as |
| well as U-Boot bundled in ATF. |
| |
| Zlib is now a virtual package, provided by either libzlib or |
| zlib-ng, similar to openssl. |
| |
| Support for the Rust programming language. |
| |
| New packages: aoetools, armbian-firmware, binaries-marvell, |
| brltty, cargo, cargo-bin, cups-filters, curlpp, daq, |
| flatbuffers, gconf, glorytun, gstreamer1-mm, imx-m4fwloader, |
| imx-gpu-g2d, json-for-modern-cpp, libcpprestsdk, libgta, |
| libostree, libupnp18, luadbi, luadbi-sqlite3, lua-utf8, lynx, |
| meson, mv-ddr-marvell, nilfs-utils, opentracing-cpp, |
| open-lldp, pimd, proj, python-flask-cors, |
| python-jaraco-classes, python-more-itertools, python-oauthlib, |
| python-raven, python-remi, python-requests-oauthlib, |
| python-schedule, python-secretstorage, python-see, |
| python-tabledata, python-txtorcon, python-xlib, qt5charts, |
| rtl8189fs, rtl8723bu, rust, rustc, rust-bin, rygel, safeclib, |
| solatus, tcf-agent, traceroute, waylandpp, wolfssl, |
| zisofs-tools, zlib-ng |
| |
| Removed packages: eeprog |
| |
| 2017.11.2, Released January 21st, 2018 |
| |
| Important / security related fixes. |
| |
| External toolchain: libatomic is now also copied for musl |
| based toolchains. |
| |
| nconfig: Fix for ncurses/ncursesw linking issue causing crashes. |
| |
| System: Only show getty options when busybox init or sysvinit |
| are used. |
| |
| Infrastructure: Fix build issue for autotools based packages |
| checking for C++ support on toolchains without C++ support and |
| on a distro lacking /lib/cpp (E.G. Arch Linux). |
| |
| Pie charts generated by 'graph-build' or 'graph-size' are now |
| sorted according to the size of each piece. |
| |
| Updated/fixed packages: asterisk, avahi, bind, busybox, |
| coreutils, eeprog, intel-microcode, iputils, irssi, kmsxx, |
| libiio, linux-firmware, lz4, mariadb, matchbox-lib, mcookie, |
| ntp, php, pound, rpcbind, tar, ti-cgt-pru, webkitgtk, xen, |
| xlib_libXpm |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9996: lz4 package does not install lz4 binaries in target |
| #10176: Rsyslog's S01logging is deleted by Busybox.mk from... |
| #10216: package/x11r7/mcookie/mcookie.c:207: bad size ? |
| #10301: systemd/getty unused options |
| #10331: kmsxx, host installation fails with BR2_SHARED_... |
| #10556: Building ntp package with SSL library libressl... |
| #10641: avahi-autoipd not starting when using systemd-tmpfiles |
| |
| 2017.11.1, Released December 31th, 2017 |
| |
| Important / security related fixes. |
| |
| Updated/fixed packages: asterisk, checkpolicy, dhcp, flann, |
| gdb, glibc, heimdal, kodi-pvr-mediaportal-tvserver, |
| kodi-pvr-stalker, libcue, libopenssl, libpqxx, libsoxr, |
| linknx, linux-tools, lldpd, ltp-testsuite, mariadb, mfgtools, |
| nodejs, nut, pulseaudio, python-cffi, qemu, rsync, tor, uboot, |
| uboot-tools, vlc, webkitgtk, weston, wireguard, wireshark, |
| xenomai, xfsprogs |
| |
| 2017.11, Released November 30, 2017 |
| |
| Fixes all over the tree. |
| |
| Toolchain: Use github mirror for Glibc. |
| |
| Defconfigs: Correct boot.cmd for bananapi-m1. |
| |
| Makefiles: Workaround include order issues for certain make |
| versions by explicitly sorting the result of wildcard where it |
| matters. |
| |
| Download: Ensure subversion runs in non-interactive mode. |
| |
| Updated/fixed packages: asterisk, boost, chrony, dovecot, |
| dvb-apps, exim, feh, freerdp, fwup, google-breakpad, jose, |
| kvm-unit-test, lftp, libcurl, libevent, libfastjson, libpjsip, |
| libupnp, linphone, localedef, lttng-tools, mp4v2, mtools, |
| ndisc6, oracle-mysql, parted, pdbg, qt, qt5connectivity, |
| qt5declarative, qt5webkit, rauc, runc, samba4, shairport-sync, |
| systemd-bootchart, webkitgtk, wireguard, xlib_libXcursor, |
| xlib_libXfont, xlib_libXfont2, |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| 10501: host-localedef fails to compile on Ubuntu 17.10 |
| 10506: Changed kernel image type (e.g. zImage to uImage)... |
| |
| 2017.11-rc2, Released November 13th, 2017 |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: collectd, ffmpeg, freerdp, |
| go-bootstrap, imagemagick, jimtcl, libpjsip, libplist, libuv, |
| mesa3d, nodejs, ntp, openjpeg, postgresql, python-numpy, ruby, |
| snmp++, usb_modeswitch, util-linux, vboot-utils, webkitgtk, |
| wireshark, wpa_supplicant, xapp_xdriinfo |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #10326: mesa3d package fails to build when BR2_SHARED_STATIC_LIBS=y |
| #10491: Cannot output security warning when compiled with buildroot.. |
| |
| 2017.11-rc1, Released November 6th, 2017 |
| |
| Fixes all over the tree and new features. |
| |
| Openssl is now a virtual package, which may be provided by |
| OpenSSL (now renamed to libopenssl) or LibreSSL. |
| |
| libssh2: there is now an explicit choice of the backend to use |
| (mbedtls, gnutls or openssl). Previously, the choice was implicit |
| based on the TLS library that was selected. Now, it is possible to |
| choose the backend, which is important if several TLS libraries are |
| selected. |
| |
| netsnmp: all MIB files are now installed, making the target filesystem a |
| bit bigger than before. To remove unneeded MIBS, you should use a |
| post-build script. |
| |
| Toolchain: Linaro toolchains updated to 2017.08, ARC toolchain |
| updated to 2017.09, Glibc updated to 2.26, Glibc support for |
| ARCv2. The toolchain wrapper now handles SOURCE_DATE_EPOCH for |
| older (pre-gcc7.x) toolchains for BR2_REPRODUCIBLE. |
| |
| New defconfigs: Atmel SAM45D27, Bananapi M1 and M2 Plus, |
| Engicam i.CoreM6 Qt5 configuration, i.MX6 sabreauto (mainline |
| kernel/u-boot), i.MX6Q sabresd Qt5 configuration, i.MX7d-pico, |
| QEMU ppc64le, Raspberry pi3 Qt5 webengine configuration, |
| Technologic TS-7680. |
| |
| New packages: asterisk, azmq, bcg729, boinc, dahdi-linux, |
| dahdi-tools, freeswitch-mod-bcg729, fscryptctl, libb64, |
| libpri, libss7, lua-basexx, lua-compat53, lua-cqueues, |
| lua-curl, lua-datafile, lua-fifo, lua-httpd, |
| lua-lpeg-patterns, lua-markdown, lua-sailor, lua-value, |
| luksmeta, minetest, minetest-game, pdmenu, prosody, |
| python-aiocoap, python-automat, python-ibmiotf, |
| python-iso8601, python-m2r, python-simplesqlite, |
| python-websockets, python-xmltodict, qt5wayland, qt5webengine, |
| restorecond, selinux-python, semodule-utils, uhubctl, |
| wireguard, wsapi-fcgi, wsapi-xavante |
| |
| Removed packages: aiccu, rfkill, sepolgen |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #10281: lsblk does not compile for util-linux |
| #10336: lttng compilation fails : linking error |
| #10351: glibc missing in rootfs |
| #10356: nfs-utils missing header |
| #10361: python3 python-config script generates invalid includes |
| #10366: dropbear download url has changed |
| #10391: WiringPi retrieves wrong (old) version |
| #10406: Beaglebone black: Buggy SGX driver version, swapped... |
| #10426: uboot-tools' fw_setenv does not update the redundant... |
| #10451: libpcap 1.8.x and 1.7x does not compile on PPC |
| |
| 2017.08.2, Released November 28th, 2017 |
| |
| Important / security related fixes. |
| |
| Qt: 5.6 version updated to 5.6.3. |
| |
| Reproducible: Do not override SOURCE_DATE_EPOCH if already set |
| in the environment. |
| |
| Makefiles: Workaround include order issues for certain make |
| versions by explicitly sorting the result of wildcard where it |
| matters. |
| |
| Updated/fixed packages: apr, apr-util, arqp-standalone, |
| azure-iot-sdk-c, collectd, dvb-apps, ffmpeg, go-bootstrap, |
| google-breakpad, gstreamer, imagemagick, irssi, jimtcl, |
| kvm-unit-test, libcurl, libfastjson, libglib2, libidn, |
| libpjsip, libplist, localedef, lttng-tools, luajit, mesa3d, |
| moarvm, mp4v2, openssh, openssl, oracle-mysql, postgresql, |
| python3, python-pyqt5, qt, qt5base, qt5canvas3d, |
| qt5connectivity, qt5declarative, qt5engineio, |
| qt5graphicaleffects, qt5imageformats, qt5location, |
| qt5multimedia, qt5quickcontrols, qt5quickcontrols2, qt5script, |
| qt5sensors, qt5serialbus, qt5serialport, qt5svg, qt5tools, |
| qt5webchannel, qt5webkit, qt5websockets, qt5x11extras, |
| qt5xmlpatterns, quagga, redis, ruby, samba4, sdl2, snmppp, |
| swupdate, ti-gfx, uboot-tools, usb_modeswitch, vboot-utils, |
| webkitgtk, wget, wireshark, xapp_xdriinfo. |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| 10326: mesa3d package fails to build when BR2_SHARED_STATIC_LIBS=y |
| 10361: python3 python-config script generates invalid includes |
| 10501: host-localedef fails to compile on Ubuntu 17.10 |
| |
| 2017.08.1, Released October 23rd, 2017 |
| |
| Important / security related fixes. |
| |
| Webkitgtk bumped to the 2.18.x series, fixing a large number |
| of security issues. |
| |
| Defconfigs: galileo: fix ext4 related kernel config, bump |
| kernel for gcc 6.x compatibility, enable wchar support for |
| grub2. wandboard: correct rootfs offset |
| |
| support: Ensure gzip compression level 6 is used for git |
| tarballs. check-bin-arch: Correctly handle (ignore) symbolic |
| links. check-rpath: Also handle PIE binaries |
| |
| External toolchain: Correctly handle glibc Buildroot |
| toolchains built with merged /usr |
| |
| musl: fix ARMv4 build with binutils 2.27.51+, fix for |
| CVE-2017-15650 |
| |
| Updated/fixed packages: apache, augeas, bind, bluez5_utils, |
| busybox, bzip2, cmake, dnsmasq, ejabberd, gcc, git, go, ffmpeg, file, |
| flashrom, gd, gdk-pixbug, gnupg2, hostapd, ifupdown-scripts, |
| imagemagick, iucode-tool, kernel-module-imx-gpu-viv, lame, |
| libarchive, libcurl, libffi, libidn, libmbim, libnspr, libnss, |
| libressl, librsync, libsoup, libxml2, libzip, mbedtls, musl, |
| netplug, nginx, openvpn, pkgconf, poppler, proxychains-ng, |
| qemu, qt, rpi-userland, syslog, ruby, samba4, softether, |
| sqlite, strongswan, subversion, supertuxkart, supervisor, tcpdump, |
| tor, unrar, urq, vboot-utils, webkitgtk, wpa_supplicant, xen, |
| xmlstarlet, xlib_libXfont, xlib_libXfont2, |
| xserver_xorg-server, zsh |
| |
| 2017.08, Released September 1st, 2017 |
| |
| Minor fixes. |
| |
| Toolchain: Don't allow internal toolchain builds for MIPS |
| M6201/P6600, as support for these are not yet in mainline GCC. |
| |
| Updated/fixed packages: bcusdk, connman, dialog, dnsmasq, |
| gnupg, grub2, iostat, iucode-tool, libgcrypt, libkcapi, |
| libphidget, libv4l, linux-tools, mediastreamer, minidlna, |
| nss-pam-ldapd, nvidia-driver, qt-webkit-kiosk, rpcbind, squid, |
| transmission, vde2, vim |
| |
| Updated/fixed defconfigs: |
| |
| Removed packages: simicfs. |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #10261: Grub2 fails to build for x86_64 |
| |
| 2017.08-rc3, Released August 23rd, 2017 |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: alsa-lib, alsa-utils, cc-tool, |
| dbus-cpp, e2fsprogs, elf2flt, faad2, fakeroot, gcc, git, gpsd, |
| gst1-validate, kvmtool, libconfuse, libepoxy, librsync, |
| libspatialindex, libunwind, linux, linux-headers, lua, |
| mariadb, mesa3d, mtd, openocd, python3, syslinux, sysvinit, |
| whois, xen, zmqpp. |
| |
| Updated/fixed defconfigs: ci20, socrates_cyclone5, |
| toradex_apalis_imx6. |
| |
| Removed defconfig: Armadeus APF9328. |
| |
| skeleton-* packages introduced in -rc1 have been renamed to |
| skeleton-init-* instead. |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #10141: Squashfs extended attribute failures |
| |
| 2017.08-rc2, Released August 11th, 2017 |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: bind, dbus, erlang-p1-xml, faad2, |
| ficl, gcc, gdb, glibc, jack2, libcurl, linux, linux-headers, |
| lua, mutt, nvme, qt5base, skeleton-common, snappy, stella, |
| swupdate, uclibc, valgrind, webkitgtk. |
| |
| Updated/fixed defconfigs: beaglebone_qt5, minnowboard_max, |
| nanopi_m1{, _plus}, olimex_a20_olinuxino_lime, qemu_sparc, |
| qemu_sparc64. |
| |
| The cmake-package infrastructure for host packages has been |
| fixed to not incorrectly detect target packages through |
| pkg-config. |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9926: systemd-resolved.service: Failed at step NAMESPACE (systemd 233) |
| #10021: libqeglfs-viv-integration.so file is missing for qt5 on armv7 |
| #10026: lua-5.3.4: fix lua linker error in swupdate |
| #10146: package/skeleton-common fix recursive variable |
| #10156: glibc compilation fails for X86 32bits (i386) |
| #10201: toolchain-wrapper.c:192: (error) Memory leak: |
| #10221: Buildroot Support |
| |
| 2017.08-rc1, Released August 2nd, 2017 |
| |
| Infrastructure: |
| |
| - The skeleton package has been split into multiple packages: |
| skeleton-sysv (when Busybox or SysV init are used), |
| skeleton-systemd (when systemd is used), skeleton-none (when |
| no init system is used) and skeleton-custom (when a custom |
| skeleton is used). Those packages, except skeleton-custom, |
| share common logic and data in a new package called |
| skeleton-common. The skeleton package becomes a virtual |
| package. This change allows to generate a filesystem that is |
| compliant with systemd expectations. |
| |
| - Support for using a read-only filesystem with systemd has |
| been fixed. |
| |
| - Major revamp of the gettext handling, with user-visible |
| effect: |
| |
| - prior to this revamp, when BR2_ENABLE_LOCALE=y, each |
| package could decide to enable or not NLS support. When |
| BR2_ENABLE_LOCALE was disabled, NLS support was forced off |
| by passing --disable-nls to packages. |
| |
| - after this revamp, a new BR2_SYSTEM_ENABLE_NLS option |
| controls whether NLS support should be enabled or not in |
| packages. This option defaults to disabled, which means |
| that now, NLS support is by default disabled in all |
| packages. |
| |
| Therefore, if you need NLS support in packages, you must now |
| explicitly enable the BR2_SYSTEM_ENABLE_NLS option. |
| |
| - The host directory no longer has a usr/ component. This |
| makes it much more natural to use that directory as an |
| externally used toolchain. For compatibility with existing |
| scripts, a usr -> . link is still added. |
| |
| - Hashes are now checked on tarballs by Buildroot when a |
| package is sourced from a Git repository. |
| |
| - Patches are no longer being downloaded from Github, since |
| auto-generated patches could change over time, and break |
| hashes. All patches that were downloaded from Github are now |
| stored in their respective package directories. |
| |
| - Hash files in packages can now contain hashes for the |
| license files contained in the package source code. This |
| allows to detect changes in such license files. |
| |
| - Binaries in $(TARGET_DIR) are now cleaned up from invalid |
| RPATHs at the end of the build. |
| |
| - A new "make sdk" target prepares $(HOST_DIR) to be |
| relocatable: turns RPATHs in host binaries into relocatable |
| ones, removes bogus RPATHs from staging binaries/libraries, |
| and provides a relocate-sdk script that can be executed to |
| relocate the SDK after installation. |
| |
| - Addition of utils/genrandconfig which generates a random |
| configuration based on a set of pre-defined toolchain |
| configurations (support/config-fragments/autobuild/) and a |
| random selection of packages. It is now used by the |
| autobuilders to generate the random configurations. |
| |
| Filesystems: |
| |
| - ext2/3/4 filesystems are now generated using mkfs.ext from |
| e2fsprogs instead of using genext2fs. |
| |
| Architecture: |
| |
| - Addition of support for ARM big.LITTLE variants |
| - Improved MIPS support, with options to select NaN encoding |
| and FP32 mode. |
| |
| Toolchain: |
| |
| - Switch to gcc 6.x as the default gcc version, add support |
| for gcc 7.x, remove support for gcc 4.8 |
| - Switch to binutils 2.28 as the default binutils version, add |
| support for binutils 2.29, remove support for binutils 2.26 |
| - Support added for gdb 8.0 |
| - uClibc-ng bumped to 1.0.26 |
| - CodeSourcery toolchains for x86 and SuperH have been |
| removed, they were using a too old glibc version |
| (2.17). External toolchains with glibc 2.17 or earlier are |
| no longer supported. |
| - The version selection in the glibc package has been |
| removed. Like musl and uClibc-ng, we now use the latest |
| glibc version. |
| - Improved support for Xtensa toolchain overlays, which can |
| now be downloaded. |
| |
| Tools: |
| |
| - Numerous improvements to the runtime test infrastructure |
| - Tests are now executed by Gitlab CI on a regular basis |
| - Tools that are directly useful to the user have been moved |
| from support/scripts/ to utils/: brmake, check-package, |
| get-developers, scancpan, scanpipy, size-stats-compare, |
| test-pkg. |
| |
| New defconfigs: A13 Olinuxino, Engicam platforms (i.CoreM6 |
| Solo/Dual/DualLite/Quad, RQS SOM, GEAM6UL SOM, Is.IoT MX6UL |
| SOM), Nano Pi M1 (Plus), OrangePi Zero and Plus. |
| |
| New packages: azure-iot-sdk-c, cracklib, dt-utils, easy-rsa, |
| erlang-jiffy, erlang-p1-oauth2, erlang-p1-xmpp, |
| ifupdown-scripts, irrlicht, kodi-inputstream-adaptive, |
| kodi-inputstream-rtmp, kvazaar, let-me-create, libloki, |
| libpwquality, libressl, libspatialindex, libva-utils, |
| linuxconsoletools, linuxptp, luaossl, lua-sdl2, lua-stdlib, |
| lsscsi, paxtest, pcre2, pixz, python-asn1crypto, |
| python-backports-shutil-get-terminal-size, python-bcrypt, |
| python-cheroot, python-h2, python-hpack, python-hyperframe, |
| python-hyperlink, python-ipython-genutils, python-pathlib2, |
| python-pickleshare, python-priority, python-portend, |
| python-scandir, python-systemd, python-tempora, |
| python-traitlets, python-typepy, qt5virtualkeyboard, |
| ratpoison, rauc, refpolicy, rhash, sdl2_mixer, sdl2_net, |
| xr819-xradio, zstd |
| |
| Removed packages: cloog, input-tools, mke2img |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #7892: systemd-journald is broken |
| #9341: avahi-utils does not compile with uClibc + libglib2 |
| #9441: Link BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY to |
| BR2_ENABLE_DEBUG |
| #9746: ext4 image generated by Buildroot is not working |
| properly with U-Boot |
| #9886: Build fails with "unexpected EOF while looking for |
| matching `"'" if PATH contains a newline |
| #9891: parted 3.1 => 3.2? |
| #9911: qt5 does not build on sparc |
| #9916: qt5 does not build on |
| arm-buildroot-linux-uclibcgnueabihf for ARMv8 cores |
| #9936: Host QEMU does not build with SDL support because of |
| pkg-config |
| #9941: nodejs option disappears for arm |
| #9951: SCANCPAN failure |
| #9966: util-linux-2.30/.stamp_built' failed |
| #9976: License file for package 'rtl8821au' incorrect |
| #9991: SGX Error implicit declaration of function |
| ‘dmac_map_area’ |
| #10011: wget does not work from Buildroot |
| #10036: Buildroot builds Raspbian Jessie headless image |
| presenting incorrect prompt |
| #10051: make: *** No rule to make target |
| 'raspberrpi3_defconfig'. Stop reported with Buildroot |
| v2017.05.1 |
| #10056: No .config file was produced in /buildroot folder |
| #10061: gcc5.4 buildroot toolchain for powerpc libsanitizer |
| failure |
| #10071: fakeroot: replace hard-coded paths in post install |
| #10076: Makefile:4113: recipe for target 'all-gcc' failed |
| #10091: gcc7.1 does not build with graphite support due to old |
| isl |
| #10121: webkit without the multimedia option causes build |
| error |
| |
| 2017.05.2, Released July 27th, 2017 |
| |
| Important / security related fixes. |
| |
| Webkitgtk bumped to the 2.16.x series, fixing a large number |
| of security issues. |
| |
| host-aespipe compile fix for Debian/Gentoo/Ubuntu toolchains |
| which default to PIE mode. |
| |
| Updated/fixed packages: aespipe, apache, bind, binutils, |
| busybox, ccache, collectd, dieharder, efibootmgr, efivar, |
| expat, ffmpeg, gcc, heimdal, iproute2, irssi, libglib2, |
| libmemcached, libosip2, libtirpc, libxml-parser-perl, |
| linux-fusion, linux-zigbee, mpg123, orc, pcre, php, protobuf, |
| pulseaudio, python-setproctitle, qt5base, rpi-firmware, |
| samba4, syslinux, systemd, spice, tcpdump, tiff, uboot-tools, |
| webkitgtk, x265, xserver_xorg-server, xvisor |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #10061: gcc5.4 buildroot toolchain for powerpc libsanitizer... |
| |
| 2017.05.1, Released July 4th, 2017 |
| |
| Important / security related fixes. |
| |
| Update support/scripts/scancpan to use METACPAN v1 API as v0 |
| has been shutdown. |
| |
| Update support/scripts/mkusers to handle setups where |
| /etc/shadow is a symlink. |
| |
| External toolchain: Don't create musl dynamic loader symlink |
| for static builds. |
| |
| Setlocalversion: Correct detection of mercurial revisions for |
| non-tagged versions. |
| |
| Defconfigs: at91sam9x5ek_mmc: workaround boot rom issue. |
| |
| Updated/fixed packages: apache, automake, bind, botan, c-ares, |
| dhcp, expat, fcgiwrap, gcc, gdb, gesftpserver, glibc, glmark2, |
| gnutls, gst1-plugins-bad, imagemagick, imx-uuc, intltool, |
| iperf, ipsec-tools, irssi, kmod, libcurl, libgcrypt, libmad, |
| libnl, lugaro, mosquitto, mpg123, ncurses, nodejs, ntp, |
| openssh, openvpn, pngquant, python-simplegeneric, qt5base, |
| qt5multimedia, rtl8821au, socat, spice, systemd, tor, trinity, |
| tslib, vlc, x264, xen, xlib_libxshmfenc, xserver_xorg-server |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9976: License file for package 'rtl8821au' incorrect |
| |
| 2017.05, Released May 31st, 2017 |
| |
| Minor fixes. |
| |
| External toolchain: musl dynamic linker symlink for mips-sf |
| corrected. |
| |
| Updated/fixed packages: agentpp, bash, exim, hans, madplay, |
| qpid-proton, rtl8188eu, snmppp, stm32flash, strongswan, sudo, |
| xen |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9906: genimage: Disk full |
| |
| 2017.05-rc3, Released May 30th, 2017 |
| |
| Fixes all over the tree. |
| |
| ARC toolchain bumped to 2017.03 |
| |
| Runtime testing improvements and cleanups. |
| |
| Updated/fixed packages: acpica, armadillo, audiofile, c-icap, |
| cppcms, dhcp, docker-engine, dropbear, elfutils, erlang, |
| fbgrab, ffmpeg, flashrom, ftop, gnutls, google-breakpad, |
| keepalived, kodi, libcdio, libepoxy, libev, libminiupnpc, |
| libqmi, libtasn1, libv4l, mariadb, mono, mosh, mosquitto, |
| mxml, ntp, opencv, openpowerlink, oracle-mysql, popt, |
| pulseview, python-enum34, rabbitmq-c, redis, samba4, stella, |
| xen |
| |
| Removed packages: firejail, ola |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9871: fbgrab 1.3 won't build with BR2_REPRODUCIBLE set |
| #9876: aarch64 support with gcc 4.8 toolchain |
| #9896: host-gcc-initial error downloading because incorrect URL |
| |
| 2017.05-rc2, Released May 17th, 2017 |
| |
| Fixes all over the tree. |
| |
| ARC toolchain bumped to 2017.03-rc2 |
| |
| Updated/fixed packages: bluez_utils, boost, clamav, daemon, |
| efibootmgr, efl, espeak, expedite, faketime, ffmpeg, fxload, |
| git, gpsd, kvm-unit-tests, libcdio, libv4l, lua, mke2img, |
| mpir, mpv, odroid-scripts, openblas, opencv3, openvpn, php, |
| postgresql, protobuf, qt5declarative, qwt, radvd, rpcbind, |
| rtmpdump, strongswan, sudo, ltp-testsuite, uclibc-ng-test, |
| vlc, x11vnc, xfsprogs |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9796: source-check broken for Git downloads |
| #9866: BASE_DIR usage |
| |
| 2017.05-rc1, Released May 8th, 2017 |
| |
| Fixes all over the tree and new features. |
| |
| Infrastructure: |
| |
| - Installed binaries are now checked for correct architecture |
| to catch natively built binaries or binaries built for other |
| architecture variants. |
| |
| - Luarocks infrastructure improvements to extraction handling, |
| support for upstream name != Buildroot package name. |
| |
| - 'make printvars' output format has changed to make it easier |
| to use in scripts. It now has options to quote the variables |
| and to show the expanded/unexpanded values. |
| |
| - Automatic ext2 rootfs size calculation has been removed. The |
| logic was not working working reliable in all setups as it |
| depends on the host filesystem behaviour, so instead now the |
| size has to be specified explicitly (defaults to 60MB). |
| |
| - The git download infrastructure now ensures that GNU format |
| tar files are created. |
| |
| - Fixed a variable clashing issue in the mkusers script with |
| internal bash variables. |
| |
| - Fakeroot now links against libacl to fix issues on |
| distributions using acls. |
| |
| - Correct permissions for /dev/pts/ptmx when systemd is used |
| with recent glibc versions. |
| |
| - br2-external: Improve error reporting. |
| |
| - A wrapper script for genimage has been added in |
| support/scripts/genimage.sh for easy use of genimage from |
| post-image scripts. |
| |
| - A script to check for common style issues in new packages |
| before submitting has been added in support/scripts/check-package |
| |
| - Defconfigs are now tested by gitlab-CI instead of Travis: |
| https://gitlab.com/buildroot.org/buildroot |
| |
| - Infrastructure for runtime testing has been added to |
| support/testing |
| |
| Toolchain: |
| |
| - External linaro toolchains updated to 2017.02, ARC toolchain |
| updated to 2017.03-rc1, NIOSII CodeSourcery to 2017.05 |
| |
| - A number of fixes and improvements to the external toolchain |
| handling, including C library detection, multilib and ld.so |
| handling |
| |
| - Glibc 2.25 and uClibc-ng 1.0.24 added, wordexp support enabled |
| for uClibc-ng |
| |
| - Binutils 2.28 added and default changed to 2.27 |
| |
| |
| Architectures: |
| |
| - Support for the C-SKY architecture has been added. |
| |
| |
| License handling: |
| |
| - The package license markings for legal info now uses the |
| SPDX short identifiers for the license string where possible. |
| |
| - License info has been improved / added for a number of packages. |
| |
| |
| Misc: |
| |
| - Cmake 3.7.x installed on the host is no longer ignored as a |
| workaround for the RPATH issues has been implemented. |
| |
| - Docker-engine can now be built statically on an otherwise |
| dynamic linked build for docker-in-docker setups. |
| |
| - U-Boot now supports out-of-tree device trees, similar to |
| Linux |
| |
| - Nodejs 0.10.x support (and with it, support for <ARMv6) has |
| been removed as this is now EOL upstream. |
| |
| New defconfigs: AT91sam9x5ek dev/mmc/mmc-dev, banana pro, |
| Nationalchip gx6605s, MIPS creator ci40, nexbox a95x, 64bit |
| defconfig for raspberry pi 3, stm32f429-disc1. |
| |
| The raspberry pi zero-w and rpi3 compute module are now also |
| supported by the rpi0 / rpi3 defconfigs, beaglebone green is |
| supported by the beaglebone defconfig. |
| |
| Removed defconfig: minnowboard, via imx6 vab820, altera |
| socdk/sockit |
| |
| New packages: arp-scan, atest, augeas, bluez-tools, daemon, |
| dc3dd, dieharder, execline, fmt, ghostscript, gqrx, |
| gst1-vaapi, jo, keepalived, kmscube, kodi-jsonschemabuilder, |
| kodi-skin-confluence, kodi-texturepacker, lensfun, leptonica, |
| libbson, libcsv, libgphoto2, libkcapi, libmaxminddb, |
| libmediaart, libnpth, libscrypt, lua-bit32, lua-resty-http, |
| lugaru, memtool, mpir, nanomsg, physfs, phytool, pngquant, |
| python-decorator, python-simplegeneric, |
| python-sortedcontainers, rpi-bt-firmware, rpi-wifi-firmware, |
| s6, s6-dns, s6-linux-init, s6-linux-utils, s6-networking, |
| s6-portable-utils, s6-rc, supertux, tesseract-ocr, |
| uccp420wlan, wilink-bt-firmware |
| |
| Broken packages: ola |
| |
| Removed packages: cosmo, kodi-visualisation-fountain, |
| polarssl, portmap, xdriver_xf86-video-glide, |
| xdriver_xf86-video-v4l, xdriver_xf86-video-wsfb |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #8831: image generation fails on host ZFS due to "no free space" |
| #9436: e2fsprogs remove busybox applets even of unselected e2fs.. |
| #9456: mkusers script bash errors |
| #9496: mke2img fails during build on ntfs-3g host partition |
| #9531: NPM fails to build embedded modules |
| #9596: KODI: --enable-lirc needs "HAVE_LIRC" compiler definition.. |
| #9691: Wrong cryptsetup package include files location |
| #9696: Wrong cryptsetup package include files location |
| #9706: Can't download newer revisions of package from PyPI |
| #9711: Recent libCEC version bump seems to break kodi package |
| #9716: exit, shutdown, reboot from kodi |
| #9721: version 2017.02: no acceptable m4 could be found in $PATH |
| #9726: Raspberry Pi version B - Problems with UART speed in.. |
| #9751: expat legal info - manifest.csv: GPLv2 Source site: MIT.. |
| #9756: glibc fails to build on buildroot-sh4*-buildroot-linux-gnu |
| #9766: support/scripts/pkgutil.py conflicts with the pkgutil.py.. |
| #9776: libubox build failed |
| #9791: Python searches for packages in the user site directory |
| #9806: libseccomp is not available when BR2_arm=y |
| #9826: post-build scritp - symlinks created in post-build script.. |
| #9836: triggerhappy: systemd unit broken |
| #9846: musl libc not installed correctly in target folder |
| #9856: build libubox failed on ubuntu 17.04 64bit |
| |
| 2017.02.11, Released April 11th, 2018 |
| |
| Important / security related fixes. |
| |
| dependencies: Blacklist tar 1.30+ and build our own host-tar |
| if needed as tar 1.30+ changed the --numeric-owner output for |
| long path names. Build host-tar before other host-dependencies |
| as they need it to extract their source tarballs. |
| |
| Updated/fixed packages: apache, busybox, clamav, dhcp, |
| dnsmasq, dovecot, exim, imagemagick, irssi, jq, libcurl, |
| libpjsip, librsvg, libtasn1, libvorbis, libxml2, lz4, mariadb, |
| mbedtls, mosquitto, ntp, openblas, opencv3, openssl, patch, |
| postgresql, python-webpy, qt53d, qt5tools, quagga, rsync, |
| samba4, sngrep, tremor, wavpack, wireshark, xerces, xterm |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #10856: openblas on qemu_x86_64_defconfig fails with "sgemm_.. |
| |
| 2017.02.10, Released January 31st, 2018 |
| |
| Important / security related fixes. |
| |
| nconfig: Fix for ncurses/ncursesw linking issue causing crashes. |
| |
| System: Only show getty options when busybox init or sysvinit |
| are used. |
| |
| Infrastructure: Fix build issue for autotools based packages |
| checking for C++ support on toolchains without C++ support and |
| on a distro lacking /lib/cpp (E.G. Arch Linux). |
| |
| Updated/fixed packages: avahi, berkeleydb, bind, busybox, |
| ccache, clamav, coreutils, dovecot, eeprog, eudev, fis, |
| intel-microcode, iputils, irssi, kmsxx, libcurl, liberation, |
| libiio, lz4, mariadb, matchbox-lib, mcookie, openocd, php, |
| pound, rpcbind, squid, tar, ti-cgt-pru, transmission, |
| util-linux, webkitgtk, wireshark, xen |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9996: lz4 package does not install lz4 binaries in target |
| #10176: Rsyslog's S01logging is deleted by Busybox.mk from... |
| #10216: package/x11r7/mcookie/mcookie.c:207: bad size ? |
| #10301: systemd/getty unused options |
| #10331: kmsxx, host installation fails with BR2_SHARED_... |
| #10536: Finding non-relative paths in the ccache |
| #10641: avahi-autoipd not starting when using systemd-tmpfiles |
| |
| 2017.02.9, Released January 1st, 2018 |
| |
| Important / security related fixes. |
| |
| Fix divide by zero issue in size-stats script. |
| |
| Fix makefile include ordering issue with certain make versions |
| in the external toolchain handling. |
| |
| Updated/fixed packages: dhcp, exim, flann, gdb, heimdal, |
| libcue, libcurl, libevent, libpqxx, libsoxr, linphone, lldpd, |
| mariadb, mfgtools, mtools, nodejs, nut, openssl, rsync, |
| samba4, tor, vlc, webkitgtk, wireshark, xfsprogs, |
| xlib_libXcursor, xlib_libXfont, xlib_libXfont2 |
| |
| 2017.02.8, Released November 27th, 2017 |
| |
| Important / security related fixes. |
| |
| Qt: 5.6 version updated to 5.6.3. |
| |
| Reproducible: Do not override SOURCE_DATE_EPOCH if already set |
| in the environment. |
| |
| Updated/fixed packages: apr, apr-util, arqp-standalone, |
| collectd, dvb-apps, ffmpeg, google-breakpad, gstreamer, |
| imagemagick, libfastjson, libglib2, libpjsip, libplist, |
| localedef, luajit, mesa3d, openssh, openssl, postgresql, |
| python3, python-pyqt5, qt5base, qt5canvas3d, qt5connectivity, |
| qt5declarative, qt5engineio, qt5graphicaleffects, |
| qt5imageformats, qt5location, qt5multimedia, qt5quickcontrols, |
| qt5quickcontrols2, qt5script, qt5sensors, qt5serialbus, |
| qt5serialport, qt5svg, qt5tools, qt5webchannel, qt5webkit, |
| qt5websockets, qt5x11extras, qt5xmlpatterns, quagga, ruby, |
| samba4, snmppp, ti-gfx, vboot-utils, webkitgtk, wireshark, |
| xapp_xdriinfo. |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| 10326: mesa3d package fails to build when BR2_SHARED_STATIC_LIBS=y |
| 10361: python3 python-config script generates invalid includes |
| 10501: host-localedef fails to compile on Ubuntu 17.10 |
| |
| 2017.02.7, Released October 28th, 2017 |
| |
| Important / security related fixes. |
| |
| Webkitgtk bumped to the 2.18.x series, fixing a large number |
| of security issues. |
| |
| Defconfigs: wandboard: Correct rootfs offset |
| |
| Toolchain: Linaro toolchains updated to 2017.08 release, |
| fixing a number of issues. Musl: fix for CVE-2017-15650. |
| |
| Updated/fixed packages: busybox, bzip2, dnsmasq, git, go, |
| hostapd, irssi, iucode-tool, lame, libcurl, libffi, libnspr, |
| libnss, nodejs, openssh, openvpn, qemu, qt, redis, sdl2, |
| webkitgtk, wget, wpa_supplicant, xen, xlib_libXfont, |
| xlib_libXfont2, xserver_xorg-server |
| |
| 2017.02.6, Released September 24th, 2017 |
| |
| Important / security related fixes. |
| |
| Cmake: Ensure correct pkg-config is used when building host |
| packages |
| |
| fs/iso9660: Ensure files from earlier builds are not included. |
| |
| Updated/fixed packages: apache, bcusdk, bind, binutils, |
| bluez5_utils, botan, cmake, connman, dbus, dialog, e2fsprogs, |
| faad2, fakeroot, ffmpeg, file, flashrom, gcc, gd, gdb, |
| gdk-pixbuf, git, gnupg, gpsd, grub2, gst1-plugins-bad, |
| imagemagick, iostat, iucode-tool, jack2, libarchive, libcurl, |
| libgcrypt, libidn, libphidget, librsync, librsvg, libsoup, |
| libxml2, linux-tools, lua, mariadb, mbedtls, mediastreamer, |
| minidlna, netplug, nss-pam-ldapd, nvidia-driver, openjpeg, |
| postgresql, proxychains-ng, python-libconfig, |
| python-service-identity, qt, rpcbind, ruby, samba4, squashfs, |
| squid, strongswan, subversion, supervisor, sysvinit, tcpdump, |
| tor, transmission, unrar, valgrind, vim, webkitgtk, whois, |
| xen, zmqpp |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #10141: Squashfs extended attribute failures |
| #10261: Grub2 fails to build for x86_64 |
| #10276: BR2_PACKAGE_LINUX_TOOLS_GPIO fails for MIPS with... |
| |
| 2017.02.5, Released July 27th, 2017 |
| |
| Important / security related fixes. |
| |
| Webkitgtk bumped to the 2.16.x series, fixing a large number |
| of security issues. |
| |
| host-aespipe compile fix for Debian/Gentoo/Ubuntu toolchains |
| which default to PIE mode. |
| |
| Updated/fixed packages: aespipe, apache, bind, binutils, |
| busybox, ccache, collectd, efibootmgr, efivar, expat, ffmpeg, |
| gcc, heimdal, iproute2, irssi, libglib2, libmemcached, |
| libosip2, libtirpc, libxml-parser-perl, linux-fusion, |
| linux-zigbee, mpg123, nodejs, orc, pcre, php, pulseaudio, |
| python-setproctitle, qt5base, rpi-firmware, samba4, syslinux, |
| systemd, spice, tcpdump, tiff, webkitgtk, x265, xen, |
| xserver_xorg-server, xvisor |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #10061: gcc5.4 buildroot toolchain for powerpc libsanitizer... |
| |
| 2017.02.4, Released July 4th, 2017 |
| |
| Important / security related fixes. |
| |
| Update support/scripts/scancpan to use METACPAN v1 API as v0 |
| has been shutdown. |
| |
| Update support/scripts/mkusers to handle setups where |
| /etc/shadow is a symlink. |
| |
| External toolchain: Don't create musl dynamic loader symlink |
| for static builds. |
| |
| Setlocalversion: Correct detection of mercurial revisions for |
| non-tagged versions. |
| |
| Updated/fixed packages: apache, automake, bind, botan, c-ares, |
| dhcp, expat, fcgiwrap, gcc, gdb, gesftpserver, glibc, gnutls, |
| gst1-plugins-bad, imagemagick, imx-uuc, intltool, iperf, |
| ipsec-tools, irssi, libgcrypt, libmad, libnl, mosquitto, |
| mpg123, ncurses, nodejs, ntp, openssh, openvpn, qt5base, |
| qt5multimedia, rtl8821au, socat, spice, systemd, tor, tslib, |
| vlc, x264, xserver_xorg-server |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9976: License file for package 'rtl8821au' incorrect |
| |
| 2017.02.3, Released June 2nd, 2017 |
| |
| Important / security related fixes. |
| |
| Download: <pkg>-source-check fixed for packages from git. |
| |
| External toolchain: musl dynamic linker symlink for mips-sf |
| corrected. |
| |
| Updated/fixed packages: armadillo, audiofile, bash, |
| bluez_utils, cppcms, dbus, dhcp, dropbear, efibootmgr, efl, |
| elfutils, faketime, fbgrab, flashrom, ftop, gdb, git, |
| google-breakpad, gpsd, hans, kvm-unit-tests, kyua, libev, |
| libmicrohttpd, libminiupnpc, libtasn1, libubox, ltp-testsuite, |
| lua, madplay, mariadb, mono, mosquitto, mxml, ntp, |
| nvidia-driver, openblas, openvpn, oracle-mysql, picocom, popt, |
| postgresql, pulseview, qt5base, qwt, rabbitmq-c, redis, |
| rpcbind, rtmpdump, samba4, strongswan, sudo, vlc |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9796: source-check broken for Git downloads |
| #9871: fbgrab 1.3 won't build with BR2_REPRODUCIBLE set |
| |
| 2017.02.2, Released May 1st, 2017 |
| |
| Important / security related fixes. |
| |
| Use HTTPS for the Codesourcery external toolchains as the HTTP |
| URLs no longer work. |
| |
| Updated/fixed packages: bind, busybox, dovecot, freetype, |
| ghostscript, glibc, granite, hiredis, icu, imagemagick, |
| gst-plugins-base, gst1-plugins-base, libcroco, libcurl, libnl, |
| libnspr, libnss, libsamplerate, libsndfile, libunwind, |
| minicom, mplayer, mpv, nodejs, python-django, python-pyyaml, |
| python-web2py, samba4, syslinux, systemd, tiff, trinity, |
| uboot, wireshark, xen |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9791: Python searches for packages in the user site directory |
| |
| 2017.02.1, Released April 4th, 2017 |
| |
| Important / security related fixes. |
| |
| Fix a variable clashing issue in the mkusers script with |
| internal bash variables. |
| |
| Improve external toolchain version detection. |
| |
| Correct permissions for /dev/pts/ptmx when systemd is used |
| with recent glibc versions. |
| |
| Fix python module name clash for graph-depends. |
| |
| Fakeroot now links against libacl to fix issues on |
| distributions using acls. |
| |
| Ensure that the git download infrastructure creates GNU format |
| tar files. |
| |
| br2-external: Improve error reporting. |
| |
| Updated/fixed packages: acl, apr, audiofile, busybox, cairo, |
| dbus-cpp, dbus-glib, dbus-triggerd, domoticz, elfutils, |
| fakeroot, filemq, fmc, gdb, git, gnutls, gst-ffmpeg, |
| gst1-plygins-bad, harfbuzz, htop, imagemagick, jasper, libcec, |
| libiio, libplatform, librsvg, libselinux, libsidplay2, libsoc, |
| libwebsockets, libxkbcommon, linux-firmware, logrotate, |
| lpt-testsuite, lttng-libust, mariadb, mbedtls, memcached, |
| mesa3d, mpd, mplayer, nbd, ncftp, ntp, openssh, opentyrian, |
| pcre, perl-gd, python, qt5base, rpi-userland, rpm, samba4, |
| skalibs, slang, sngrep, squashfs, syslog-ng, taglib, |
| tcpreplay, tor, upmpdcli, wget, wireshark, |
| xdriver_xf86-video-vmware, xlib_libXv, zmqpp |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9456: mkusers script bash errors |
| |
| 2017.02, Released February 28th, 2017 |
| |
| Minor fixes, mainly fixing autobuilder issues. |
| |
| Don't use cmake 3.7.x from the build host as it is also |
| affected by the RPATH handling issues, and instead build our |
| own if needed. |
| |
| Updated/fixed packages: assimp, classpath, genimage, mplayer, |
| mpv, openocd, python-libconfig, qt5base, qt5quickcontrols, |
| vlc, xterm |
| |
| 2017.02-rc3, Released February 26th, 2017 |
| |
| Fixes all over the tree. |
| |
| Cmake reverted to version 3.6.3 to workaround regressions |
| related to RPATH handling. |
| |
| Updated/fixed packages: bctoolbox, berkeleydb, binutils, |
| btrfs-progs, classpath, directfb, glibc, gstreamer1, |
| gst1-plugins-{base,good,bad,ugly}, gst1-libav, |
| gst1-rtsp-server, gst1-validate, gst-omx, htop, libcurl, |
| libepoxy, libimxvpuapi, libpcap, libuv, ncurses, openssh, |
| oracle-mysql, poco, python, qt5base, qt5webkit, sslh, synergy, |
| trousers, uclibc-ng-test, util-linux, vlc, xfsprogs |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9251: Shared C++ libraries for Microblaze results in Segmentation... |
| #9456: mkusers script bash errors |
| #9506: Collectd 5.7.0 fails to build with libcrypt |
| #9581: VagrantFile provisioning step fails due to issue with grub-pc |
| #9586: usbmount: usbmount slows down the system... to a state of... |
| #9616: CMake host packages cannot provide CONF_ENV |
| #9641: Need raptor package installed in staging |
| #9671: stunnel build error |
| |
| 2017.02-rc2, Released February 20th, 2017 |
| |
| Fixes all over the tree. |
| |
| Support for SOURCE_DATE_EPOCH in the toolchain wrapper for |
| older gcc versions for reproducible builds has been |
| (temporarily) reverted because of licensing compatiblity |
| concerns. |
| |
| Defconfigs: SD card generation fix for the Udoo Neo board |
| |
| Infrastructure to handle .lz compressed tarballs added, and |
| affected packages updated to use it. |
| |
| Updated/fixed packages: bctoolbox, bind, canelloni, |
| cbootimage, ccache, classpath, cups, dbus, ddrescue, directfb, |
| ed, erlang, gcc, gdb, glmark2, gstreamer, gstreamer1, hiredis, |
| kmod, kmsxx, lcdapi, libasplib, libgpiod, libnss, libraw, |
| libv4l, mesa3d-headers, mosquitto, mpd, mpv, musl, ntfs-3g, |
| ocrad, openswan, postgresql, qt5base, qt5quickcontrols, redis, |
| riemann-c-client, samba4, sunxi-mali, tcping, trousers, |
| uclibc, util-linux, vim, wavpack, wget, wiringpi, xfsprogs, |
| xserver_xorg-server |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #8941: Valgrind fails to build with stack protection turned on |
| #9291: perl: SysV message queues not configured, even if available |
| #9651: libxcb-1.12 built Error |
| #9656: util-linux: schedutils doesn't build on target w/o enabl... |
| #9666: qt5quickcontrols install fails |
| |
| 2017.02-rc1, Released February 11th, 2017 |
| |
| Fixes all over the tree and new features. |
| |
| Infrastructure: |
| |
| - numerous improvements to support reproducible builds |
| |
| - new waf-package package infrastructure to support packages |
| that use the Waf build system. 6 packages converted to |
| this infrastructure. |
| |
| - add option <pkg>_PREFER_INSTALLER to the perl package |
| infrastructure |
| |
| Architecture: |
| |
| - add support for the OpenRISC CPU architecture |
| |
| - merge description of the ARM and ARM64 options, and add |
| support for selecting a specific ARM64 core |
| |
| Toolchain: |
| |
| - major rework of the external toolchain support. It is now |
| split into several packages, one per external toolchain, |
| and a common infrastructure. |
| |
| - important fix for musl to prevent a conflict between musl |
| and kernel headers (fixes the build of numerous packages |
| with musl) |
| |
| - uClibc-ng bumped to 1.0.22, and therefore enable uClibc |
| for ARM64, mips32r6 and mips64r6 |
| |
| - add gdb 7.12.1, and switch to gdb 7.11 as the default |
| |
| - Linaro toolchains updated to 2016.11, ARC toolchain |
| components updated to arc-2016.09, MIPS Codescape |
| toolchains bumped to 2016.05-06, CodeSourcery AMD64 and |
| NIOS2 toolchains bumped |
| |
| - remove Analog Devices toolchain for the Blackfin |
| architecture, remove pre-built musl toolchains from |
| musl.codu.org |
| |
| New defconfigs: Freescale i.MX23EVK, Qemu OpenRISC emulation, |
| Qemu NIOS2 emulation, Grinn chiliBoard, Freescale i.MX6Q |
| SabreSD, BeagleBoard X15, OrangePi One, ARC HS38 HAPS |
| |
| New packages: angular-websocket, aubio, bctoolbox, darkhttpd, |
| ddrescue, easydbus, fakedate, git-crypt, hiredis, ifenslave, |
| jsmn, libgpiod, libgsm, linux-syscall-support, mariadb, mimic, |
| nginx-dav-ext, nmon, opkg-utils, policycoreutils, |
| pru-software-support, python-arrow, python-attrs, |
| python-babel, python-bitstring, python-chardet, |
| python-constantly, python-flask-babel, python-gunicorn, |
| python-incremental, python-jsonschema, python-logbook, |
| python-markdown2, python-mbstrdecoder, python-mutagen, |
| python-pathpy, python-pudb, python-pyqrcode, |
| python-pytablereader, python-setuptools-scm, python-sh, |
| python-toml, python-vcversioner, python-whoosh, |
| raspberrypi-usbboot, riemann-c-client, rtl8723bs, skalibs, |
| sslh, sngrep, ti-cgt-pru, uclibc-ng-test, udpxy, uhttpd, |
| upower, ustream-ssl, waf, xlib_libXfont2 |
| |
| Removed packages: perl-db-file, snowball-hdmiservice, |
| snowball-init |
| |
| Tooling: addition of a test-pkg script to help contributors |
| build test their package. |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #8946: Valgrind fails to build with stack protection turned on |
| #9461: odroidc2 - toolchain Linaro AArch64 2016.11 compile error |
| #9466: VIM_REMOVE_DOCS removes rgb.txt |
| #9486: xorg-server 1.19 fails to compile for glibc with systemd init (x86_64) |
| #9501: eudev fails to build with older kernel headers |
| #9526: Embedded NPM fails to start with "no such file or directory" error |
| #9541: Platform drivers autoloading from info in device tree does not work |
| #9546: seems BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS do nothing |
| #9551: Coreutils fails to build target src/src_libsinglebin_pinky_a-pinky.o |
| #9566: [kmod] Compilation fails with uclibc |
| #9571: buildroot fails while building opencv for arm64 platform |
| #9576: External tree with BR 2016.11 does not work anymore |
| #9606: xorg-server cannot build for ARM target |
| |
| 2016.11.3, Released March 9th, 2017 |
| |
| Important / security related fixes. |
| |
| Updated/fixed packages: bind, dbus, gnutls, imagemagick, |
| lcms2, libcurl, ntfs-3g, ntp, openssl, php, quagga, redis, |
| squid, stunnel, tcpdump, vim, wavpack, wireshark, xlib_libXpm |
| |
| 2016.11.2, Released January 25th, 2017 |
| |
| Important / security related fixes. |
| |
| A fix for BR2_EXTERNAL trees referenced using relative paths, |
| which broke in 2016.11. |
| |
| Updated/fixed packages: bind, docker-engine, gd, gnutls, go, |
| imagemagick, irssi, libpng, libvncserver, musl, opus, php, |
| php-imagick, rabbitmq-server, runc, wireshark, |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9576: External tree with BR 2016.11 does not work anymore |
| |
| 2016.11.1, Released December 29th, 2016 |
| |
| Important / security related fixes. |
| |
| Updated/fixed packages: apache, cryptopp, docker-engine, |
| dovecot, exim, gdk-pixbuf, libcurl, libupnp, links, monit, |
| nodejs, openssh, php, python, python-bottle, samba4, squid, |
| uboot, vim, wireshark, xorg-server uboot |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9466: VIM_REMOVE_DOCS removes rgb.txt |
| |
| 2016.11, Released November 30th, 2016 |
| |
| Minor fixes. |
| |
| Updated/fixed packages: bzip2, gcc, jasper, sane-backends, |
| uboot, uclibc |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9451: packages/postgresql/postgresql.mk contains wrong POST... |
| |
| 2016.11-rc3, Released November 28th, 2016 |
| |
| Fixes all over the tree, including a number of security fixes. |
| |
| The move from fakeroot to pseudo unfortunately brought a |
| number of issues. The SELinux issue described in #9386 which |
| triggered the move to pseudo has been investigated further and |
| a workaround implemented and the pseudo changes reverted. |
| |
| Linux kernel: update default to 4.8.11. |
| |
| Defconfigs: Updates/fixes for imx28ek, mx6udoo, imx6ulpico, |
| olimex a20 olinuxino lime mali, roseapplepi, synopsis aarch64 |
| vdk, axs101, axs103 and hs38 smd vdk. |
| |
| Updated/fixed packages: autossh, chrony, dosfstools, |
| dtv-scan-tables, e2fsprogs, gcc, gdb, gnuchess, gnuradio, |
| gpsd, gst1-plugins-bad, gst1-plugins-good, imagemagick, |
| kvm-unit-tests, libfribi, libuv, mesa3d, mpfr, mplayer, mpv, |
| ntp, ola, olsr, openblas, openjpeg, openssh, postgresql, |
| ptpd2python3, qemu, qextserialport, qt5base, quagga, xqwt, |
| taskd, tiff, tremor, trousers, udisks, uclibc, wireshark, |
| xapp_xload, xenomai, xmlstarlet |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9386: ubinize fails with or without custom config |
| #9431: A misspelling |
| #9446: make raspberrypi3_defconfig compilation failure |
| |
| 2016.11-rc2, Released November 13th, 2016 |
| |
| Fixes all over the tree. |
| |
| Architecture: add support for MIPS XBurst cores; remove MIPS |
| support for M5100 cores. |
| |
| Updated/fixed packages: mesa3d, lttng-babeltrace, tinyalsa, pseudo, |
| czmq, libxml2, makedevs, binutils, kvm-unit-tests, libnss, privoxy, |
| qemu, ser2net, net-tools, ffmpeg, assimp, libmpeg2, ccache, mpv, |
| libxslt, python, python3, php, valgrind, guile, domoticz, efl, |
| jasper, kvmtool, go, wget, sane-backends, weston, tinymembench, |
| strace, openjpeg, lcms2, quota. |
| |
| Linux kernel: update default to 4.8.7. |
| |
| CMake support: fix cmake wrapper to properly pass NDEBUG flag. |
| |
| Filesystems: use a wrapper to pseudo, to better mimick the behaviour |
| of fakeroot; makedevs no longer breaks of the destination already |
| exists and is of the correct type/major/minor. |
| |
| Defconfigs: a few legacy and broken defconfigs have been removed |
| because they now fail to build: kb9202_defconfig, mini2440_defconfig, |
| freescale_p2020ds, qmx6, calao*, atmel_sama5d4ek. Other defconfigs |
| have been updated: nanopi-neo, olimex_a20_olinuxino_lime_mali, |
| armadeus_apf51, armadeus_apf28, freescale_imx31_3stack, ci20, |
| olimex_a20_olinuxino_lime2, atmel_at91sam9260eknf, |
| atmel_at91sam9rlek, atmel_at91sam9g20dfc, atmel_at91sam9g45m10ek, |
| atmel_sama5d3xek. |
| |
| 2016.11-rc1, Released November 3rd, 2016 |
| |
| Fixes all over the tree and new features. |
| |
| It is now possible to specify multiple BR2_EXTERNAL |
| directories. The required files in a BR2_EXTERNAL directory |
| have changed to accomodate this feature. Refer to the |
| documentation for details of how to update them. External |
| trees now have a name and a description. Also, it is possible |
| to override a defconfig in the external tree. |
| |
| The default skeleton now uses UID 65534 for the "nobody" |
| user instead of UID 99, like most distros do. See |
| https://lwn.net/Articles/695478/ for a complete discussion. |
| Programs and configuration files that explicitly refer to UID |
| 99 will have to be updated. |
| |
| When the build environment already has a suitable cmake version |
| (3.1 or later), that one will be used instead of building |
| host-cmake. This can speed up the build significantly. |
| |
| The ExtUtils::MakeMaker perl module is now required in the |
| build environment. |
| |
| An additional check is done during the build that files are |
| not installed in the output directory within the output |
| directory. This happens e.g. when the target directory is |
| contained both in --prefix and in DESTDIR. The build will |
| terminate with an error message that specifies which package |
| and which file caused the failure. |
| |
| The concept of "deprecated packages" and the BR2_DEPRECATED |
| option have been removed. Instead, packages are removed |
| immediately. Packages are only removed when they don't work |
| for some reason. If you still need a removed package and |
| you have a solution for the problem(s) that caused the |
| removal, please contribute it. |
| |
| Architecture: support for sh64 removed, improved support for |
| MIPS core selection. |
| |
| Toolchain: support for musl powerpc64le, mips64 and mipsr6 |
| toolchains, ARC toolchain components updates, gcc 6.x series |
| bumped to 6.2.0, default binutils version switched to 2.26, |
| default gcc version switched to gcc 5.x, Linaro toolchains |
| updated, uclibc-ng bumped to 1.0.19. GCC is now always built |
| with TLS support. Checking of unsafe compiler options (that |
| point to host directories) has been extended with -isystem, |
| -idirafter and -iquote. |
| |
| Package infrastructure: new variable $(PKG)_DL_OPTS, addition |
| of <pkg>-show-rdepends to list reverse dependencies, and |
| <pkg>-graph-rdepends to graph reverse dependencies. Linux tools |
| are now in a separate linux-tools package instead of in the |
| kernel build. Fakeroot has been replaced by pseudo. |
| |
| CMake support: the toolchainfile.cmake file now provides a |
| definition of the CMAKE_BUILD_TYPE variable. The |
| toolchainfile.cmake also no longer forces the compiler/linker |
| flags defined by Buildroot. |
| |
| New defconfigs: WaRP7, Solidrun's MX6 Cubox/Hummingboard, |
| TS-4900, Grinn's liteBoard, Udoo MX6Q/DL, Qemu ARM noMMU, |
| BeagleBone Qt5 demo, Digilent Zybo, FriendlyARM Nanopi NEO. |
| |
| New packages: arm-trusted-firmware, amd-catalyst, atop, aufs, |
| aufs-util, fwts, gst1-rtsp-server, libglob, libite, mfgtools, |
| mksh, motion, paho-mqtt-c, php-amqp, pseudo, python-couchdb, |
| python-crcmod, python-cssutils, python-docutils, |
| python-futures, python-mwclient, python-mwscrape, |
| python-mwscrape2slob, python-pyelftools, python-pyicu, |
| python-pylru, python-pyqt5, python-requests-toolbelt, |
| python-simpleaudio, python-slob, rabbitmq-server, shapelib, |
| vdr, vdr-plugin-vnsiserver, vexpress-firmware, xvisor, iio and |
| gpio linux tools. |
| |
| Removed packages: binutils 2.24, fakeroot, gcc 4.7, ipkg, |
| kodi-addon-xvdr, libgail, sstrip, torsmo, webkit, webkitgtk24, |
| wvdial, wvstreams. |
| |
| Documentation: the list of packages that was present in the |
| Buildroot manual has been removed. |
| |
| Legal info: the "licenses.txt" file that concatenates all |
| license texts is no longer generated - it was not considered |
| useful. The manifest.csv contains an empty cell instead of |
| "not saved" when no license file is available. |
| |
| Other: addition of a DEVELOPERS file listing developers taking |
| care of packages or architectures. |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #7802: host-python build hangs compiling getbuildinfo.o |
| #8206: mplayer uses host xorg development files |
| #8516: mkcubiecard.sh uses outdated sfdisk switch -D |
| #8536: Building sudo with PAM results in unusable sudo |
| #8646: check-host-rpath script returns false positives when rpath |
| contains symlink |
| #8696: xdriver_xf86-input-mouse install header files in target |
| directory |
| #8811: rp-pppoe - generated scripts commands use HOST pathnames, |
| not necessarily TARGET |
| #8846: Orphaned/missing toolchain borks eclipse plugin |
| #8856: python tornado runtime wasn't met on buildroot 2016.02 |
| #8901: gcc failes to build if fortran is enabled |
| #8916: LDFLAGS pass to openssh |
| #8941: "ls" of an NFSv4 share only works when pumped through strace |
| #8946: Valgrind fails to build with stack protection turned on |
| #9021: Kodi - Broken: Illegal instruction (core dumped) |
| #9096: rootfs.ubi not created |
| #9111: glibc 2.23: libmvec.so not copied |
| #9176: minnowboard : USB not mounted |
| #9196: raspberry pi 3 default build seem broken |
| #9201: Permission denied make: *** [core-dependencies] Error 126 in |
| Buildroot-2015.08.1 |
| #9216: log4cpp package build fails to build within install |
| #9221: Kodi needs "Python .py and .pyc support" otherwise it crashes when |
| pressing buttons. |
| #9229: Firefly boot fails with: "failed to find part:boot" |
| #9256: [Config file] New device: Odroid-U2/U3 |
| #9296: Buildroot Fails on applying patches |
| #9301: U-boot fails to build with default zynq_zed_defconfig configuration |
| #9316: U-boot fails to build if libssl-dev is not installed |
| #9321: Vanilla libcrypt++ v5.6.3 doesn't allow to work Nvidia Tegra's |
| flash utility (tegrarcm) |
| #9326: Odroid-C2 build results in non-bootable image |
| #9336: Improve iconv support for external toolchain based builds |
| #9356: gdb package |
| #9366: no link rootfs.ext4 -> rootfs.ext2 |
| #9371: openssl: download failes with "Only allow downloads from primary |
| download site" + local server |
| #9381: check-host-rpath issues |
| #9386: ubinize fails with or without custom config |
| |
| 2016.08, Released September 1st, 2016 |
| |
| Minor fixes. |
| |
| Toolchain: ARC tools updated to arc-2016.09-eng010. |
| |
| Updated/fixed packages: libshout, luajit, mpd, mplayer |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #7520: CodeSourcery toolchain ARM: C++11 std::exception_ptr.. |
| #8341: Getting EGL Error: Could not create the egl surface:.. |
| #9121: gst1-imx for i.MX6 compile failed, cannot find PXP, .. |
| |
| 2016.08-rc3, Released August 29th, 2016 |
| |
| Fixes all over the tree. |
| |
| Toolchain: C++ support for the internal blackfin toolchain |
| re-enabled. |
| |
| Architecture: Default to bf532 CPU variant for blackfin, |
| Fix flat one memory region support for m68k and disable flat |
| seperate data support because of compatibility issues. |
| |
| Defconfigs: Minnowboard and Raspberrypi: Fix errors with |
| post-build scripts when systemd is used. |
| Zynq microzed/zc706/zed: Fix u-booot configuration. |
| |
| netbsd-queue package extended and renamed to |
| musl-compat-headers. With this, a number of musl compatibility |
| patches are no longer needed. |
| |
| Updated/fixed packages: aircrack-ng, android-tools, babeld, |
| bcusdk, binutils, boa, busybox, connman, cpupower, |
| docker-engine, domoticz, elf2flt, ffmpeg, fwup, gcc, |
| glib-networking, gnupg, hplip, igd2-for-linux, imagemagick, |
| imx-uuc, iputils, jack2, kismet, kmsxx, libaio, libamcodec, |
| libconfuse, libffi, libfreeimage, libgcrypt, libgpg-error, |
| libiio, libraw, libsepol, libserialport, libxmlrpc, linknx, |
| linux-pam, lirc-tools, lldpd, logrotate, lshw, musl, ncurses, |
| neon, nettle, norm, ntfs-3g, openblas, openmpi, openswan, |
| pinentry, pixman, protobuf, python-meld3, qlibc, qt, qt5base, |
| quagga, rpcbind, rt-tests, runc, sane-backends, sconeserver, |
| squeezelite, stella, tftpd, tinycbor, tinydtls, trace-cmd, |
| trousers, tstools, uboot-tools, uclibc, ulogd, ustr, vlc, |
| webkitgtk, wireshark, xdriver_xf86-video-intel |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9101: Error on support/download/git with system git older than 1.8.4 |
| #9181: Compiling linux kernel fails if BR2_LINUX_KERNEL_TOOL_CPU.. |
| |
| 2016.08-rc2, Released August 17th, 2016 |
| |
| Fixes all over the tree. |
| |
| Toolchain: disable broken C++ support for internal blackfin |
| toolchains, ARC toolchain bumped to arc-2016.09-eng008 (GCC 6) |
| to fix various issues. |
| |
| System: Zoneinfo is available for the musl C library as well. |
| |
| Updated/fixed packages: am33x-cm3, axel, barebox, bdwgc, |
| blktrace, cairo, dante, enlightenment, fbterm, ffmpeg, flex, |
| fontconfig, gcc, gmp, gnuplot, gnuradio, gst1-imx, hidapi, |
| inotify_tools, iproute2, kmsxx, lftp, libaio, libcofi, |
| libical, libpjsip, libsidplay2, libunwindow, libxml2, |
| linux-zigbee, lttng-libust, mpv, mtd, ncdu, netplug, ntp, |
| openblas, openipmi, owfs, php, poco, procps, qt, quota, |
| sg3_utils, spidev_test, systemd-bootchart, thrift, |
| uboot-tools, uclibc, webrtc-audio-processing, wayland, weston, |
| xdriver_xf86-video-savage, xserver_xorg-server, xen |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #9136: make graph-size fails with "ValueError: too many values to.. |
| #9151: qt: fix build with ALSA >= 1.1.x |
| #9156: qt: Fix missing runtime Qt3Support dependency |
| #9161: modsetting patch not applied to xserver 1.18.4 |
| #9166: Missing overlays directory in VFAT image for raspberry pi 3 |
| |
| 2016.08-rc1, Released August 6th, 2016 |
| |
| Fixes all over the tree and new features. |
| |
| Toolchain: Fortran support added. eglibc support removed, musl |
| support no longer experimental. Blackfin and Microblaze |
| support for internal uClibc-ng toolchain, m68k/coldfire |
| improvements. The check for unsafe (build host) directories |
| access (/usr/include and /usr/lib) is now enabled by default. |
| Unused locales are now purged by default to save space (and |
| the default list of locales shrunk). The option to control |
| this has now moved from the toolchain menu to system |
| configuration. |
| |
| Legal info improvements: sources are now hardlinked instead of |
| copied if possible to save space. Patches and extra downloads |
| are also saved. |
| |
| An experimental configuration knob (BR2_REPRODUCIBLE) has been |
| added to make the builds more reproducible (E.G. less |
| differences in the binary output between builds of the same |
| configuration). This is still work in progress. |
| |
| An option to execute a custom script inside the fakeroot |
| environment used to the generate the filesystem (E.G. to tweak |
| permissions or similar) has been added. |
| |
| Git support now supports git submodules if |
| <pkg>_GIT_SUBMODULES is enabled. |
| |
| Hash files for integritry validation have been added for all |
| packages. |
| |
| Scanpypi utility to help creating packages from the Python |
| package index (pypi) has been added. |
| |
| The makedevs utility now has support for adding file |
| capabilities using extended attributes. |
| |
| New defconfigs: Arcturus uCP1020, Atmel sama5d{2,3,4} xplained |
| development configs, Blackfin GDB simulator, Linksprite |
| pcDuino, Minnow Board Max graphical demo, NXP i.MX25 PDK, |
| i.MX51 EVK, i.MX6UL Pico, i.MX7 sabresd, QEMU MIPS32r6{,el} and |
| MIPS64r6{,el} malta, Roseapple Pi, Samsung Snow chromebook, |
| Toradex Apalis i.MX6 COM, TS-4800, x86-64 PC BIOS and EFI |
| demos. A number of defconfigs have been updated and extended |
| to generate SD card images. Synopsys HS38 VDK defconfig removed. |
| |
| New packages: 4th, acpica, acpitool, alljoyn, alljoyn-base, |
| alljoyn-tcl, alljoyn-tcl-base, argparse, babeld, batman-adv, |
| circus, dante, docker-containerd, docker-engine, domoticz, |
| efibootmgr, efivar, ficl, fwup, gsettings-desktop-schemas, |
| gtksourceview, gupnp-dlna, gupnp-tools, igd2-for-linux, |
| jemalloc, kmsxx, lapack, lft, libaacs, libamcodec, libbdplus, |
| libcoap, libdvdcss, libebur128, libfastjson, libminiupnpc, |
| libnatpmp, libpqxx, libuio, libvdpau, log4cpp, minissdpd, |
| mxsldr, nginx-nasxi, nginx-upload, ninja, nodm, odroid-mali, |
| odroid-scripts, omxplayer, openblas, openmpi, openzwave, |
| p7zip, pdbg, python-argh, python-dataproperty, |
| python-dateutil, python-dialog3, python-dicttoxml, |
| python-dominate, python-engineio, python-flask-jsonrpc, |
| python-flask-login, python-humanize, python-pathtools, |
| python-pathvalidate, python-pillow, python-prompt-toolkit, |
| python-pytablewriter, python-pytz, python-scapy3k, |
| python-sdnotify, python-socketio, python-tomako, |
| python-ubjson, python-u-msgpack, python-watchdog, |
| python-wcwidth, python-xlrd, python-xlsxwriter, |
| python-xlutils, python-xlwt, rs485conf, runc, sdl2_gfx, |
| sdl2_image, sdl2_ttf, shellinabox, sphinxbase, stella, |
| supertuxkart, systemd-bootchart, tekui, terminology, tinycbor, |
| tinydtls, ti-sgx-demos, ti-sgx-km, ti-sgx-um, tunctl, wavemon, |
| wiringpi, xen |
| |
| Deprecated packages: ipkg, sstrip |
| |
| Removed packages: sunxi-mali-prop |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #8931: segment fault when compile argp-help.c using aarch64-bu... |
| #8966: eglfs error. buildroot don't compile the library libeglfs.so |
| #8971: build for beaglebone fails |
| #8986: qt5imageformats fails to build on AArch64 |
| #8991: grub2 fails to compile |
| #9001: Nodejs option not available |
| #9006: gcc with c++ support v4 and v5 fail to compile on fedora 24 |
| #9016: arceb-buildroot-linux-uclibc ld uses incorrect default format |
| #9066: 8139TOO - faulty behaviour |
| #9086: Syntax Error (missing ")" in boot/uboot/uboot.mk on line 203) |
| #9091: U-Boot fails to boot with large ramdisk |
| |
| 2016.05, Released May 31st, 2016 |
| |
| Minor fixes. |
| |
| External toolchain: Fix for symlink handling when copying |
| links to target. |
| |
| Updated/fixed packages: gcc, grantlee, gst-ffmpeg, |
| ipsec-tools, iptraf-ng, libcurl, libdrm, libsigsegv, ltris, |
| lttng-babeltrace, mbedtls, mesa3d, moarvm, mplayer, mtools, |
| net-tools, openpowerlink, pulseview, rpm, tinyalsa, |
| xdriver_xf86-video-fbturbo, xserver_xorg-server |
| |
| 2016.05-rc3, Released May 26th, 2016 |
| |
| Fixes all over the tree. |
| |
| Tweaks for SSP handling for external toolchains. |
| |
| Updated/fixed packages: aircrack-ng, bluez5_utils, connman, |
| cups, erlang-p1-stringprep, expat, ffmpeg, flann, flannel, go, |
| gst1-libav, hidapi, hplip, iptraf-ng, jamvm, kodi, |
| kodi-screensaver-matrixtrails, libcurl, libepoxy, libgpgme, |
| libsemanage, libxslt, liquid-dsp, ltris, lxc, mesa3d, midori, |
| mpg123, mtr, openpgm, openpowerlink, oprofile, php, |
| postgresql, putty, python-service-identity, python-treq, |
| qlibc, qt5serialbus, ruby, stress-ng, strongswan, time, tinc, |
| ustr, valgrind, webkitgtk, libxml2, xorriso, |
| xserver_xorg-server |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #8936: Aircrack-ng - Alot of missing dependencies |
| |
| 2016.05-rc2, Released May 17th, 2016 |
| |
| Fixes all over the tree. |
| |
| Rootfs overlay handling now refuses to overwrite |
| /{usr,bin,sbin,lib} symlinks from BR2_ROOTFS_MERGED_USR option |
| even if these directories are present in the overlay. |
| |
| External toolchain: Unbreak user provided libraries deployment |
| (BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS) handling after refactoring. |
| |
| QEMU coldfire: Fix for signal handling kernel issue, enable |
| networking support. |
| |
| Updated/fixed packages: android-tools, assimp, boost, gcc, |
| glibc, glmark2, gmrender-resurrect, go, go-bootstrap, iputils, |
| jack2, kodi-screensaver-asterwave, kodi-screensaver-rsxs, |
| kodi-visualisation-shadertoy, libarchive, libinput, libpjsip, |
| mali-t76x, mtr, nginx, opencv, openvpn, python-coherence, |
| qt5multimeda, quagga, samba4, sg3-utils, stress-ng, turbolua |
| |
| 2016.05-rc1, Released May 10th, 2016 |
| |
| Fixes all over the tree and new features. |
| |
| Architectures: new ARM variants: Cortex A17 and M4, improved |
| nonmmu (cortex-M) support, m68k has been re-enabled with |
| support for ColdFire. For x86, support for the i386 variant |
| has been dropped. |
| |
| Toolchain: Add GCC 6 support, remove GCC 4.5, mark GCC 4.7 as |
| deprecated. Go programming language support, Add Binutils 2.26 |
| support. Old Sourcery PowerPC external toolchains removed, |
| Sourcery MIPS 2016.06-8, AMD64 2015.11-139, NiosII 2015.11-130 |
| added, Linaro ARM/ARMeb/Aarch64 toolchains updated. |
| |
| New defconfigs: Firefly RK3288, Boundary Devices i.MX7 Nitrogen7, |
| STM32F429 and STM32F469 Discovery boards, Hardkernel ODROID-C2, |
| Raspberry Pi Zero and Raspberry Pi 3. Some Qemu defconfigs were |
| added for m68k, eXtensa-nommu and ColdFire. |
| |
| Linux: use zImage by default on ARM, subversion repository |
| support (for u-boot as well). |
| |
| New packages: aer-inject, android-tools, cannelloni, |
| cbootimage, cgroupfs-mount, connman-gtk, crudini, dt, |
| gmrender-resurrect, flannel, font-awesome, freeswitch, go, |
| go-bootstrap, gr-osmosdr, granite, i7z, imx-uuc, |
| kodi-adsp-basic, kodi-adsp-freesurround, |
| kodi-audiodecoder-opus, kodi-pvr-hdhomerun, |
| kodi-screensaver-asterwave, kodi-screensaver-cpblobs, |
| kodi-screensaver-matrixtrails, kodi-screensaver-planestate, |
| kodi-screensaver-rsxs, kodi-visualisation-fishbmc, |
| kodi-visualisation-fountain, kodi-visualisation-goom, libgee, |
| libimxvpuapi, libpjsip, libtomcrypt, libtommath, libusbgx, |
| lksctp-tools, mali-t76x, mkpimage, mpv, msr-tools, nload, |
| norm, nvme, owfs, pound, privoxy, procrank_linux, putty, |
| python-autobahn, python-characteristic, python-crossbar, |
| python-cryptography, python-iniparse, python-iowait, |
| python-lmdb, python-pexpect, python-ptyprocess, |
| python-pyasn-modules, python-pygments, python-pymysql, |
| python-pynacl, python-pyopenssl, python-pysocks, |
| python-pytrie, python-rpi-gpio, python-service-identity, |
| python-setproctitle, python-shutilwhich, python-treq, |
| python-txaio, python-ujson, python-wsaccel, qt5canvas3d, |
| qt5location, qt5quickcontrols2, qt5serialbus, qt5tools, |
| raptor, scrub, taskd, tegrarcm, turbolua, valijson, |
| wayland-protocols, webkitgtk, wilc1000-firmware, wpan-tools, |
| xdriver_xf86-video-amdgpu |
| |
| Removed packages: foomatic-filters, python-m2crypto, |
| qt5quick1, qt5webkit-examples, samba, xdriver_xf86-input-void |
| |
| Issues resolved (http://bugs.buildroot.org): |
| |
| #6830: Qt5: no fonts are installed |
| #7562: musl buildroot-toolchain and BR2_MIPS_SOFT_FLOAT break |
| #7580: Invalid filesystem in Pandaboard defconfig |
| #8346: wf111 package removes all kernel module dependencies |
| #8436: xserver_xorg-server Segmentation fault |
| #8736: IPV6 forced on in busybox |
| #8746: At startup system stops with 'cannot set terminal proces.. |
| #8751: make fail [fio does not build on sh] |
| #8766: Compiling host-gcc-final-4.9.3 broken on i386 |
| #8771: make savedefconfig modifies sources |
| #8781: Unable to build uboot for imx28evk |
| #8786: gdb fails to build with xz and expat support at the same |
| #8801: Compilation of Buildroot 2016.2 for Raspberry Pi with... |
| #8806: Buildroot 2016.2 for Raspberry Pi requires that ext4... |
| #8836: Can't select Vim in menuconfig |
| #8851: Make sure fio can compile with libaio support if it... |
| #8861: With buildroot 2016.02 trying to build for corei7-avx |
| fails while trying to build host-binutils |
| #8866: Making an USB flash bootable with extlinux build with |
| buildroot does not work |
| |
| 2016.02, Released March 1st, 2016 |
| |
| Minor fixes, mostly security related. |
| |
| Circular dependency issue with same-as-kernel linux-headers |
| option fixed. |
| |
| Updated/fixed packages: bluez5_utils, heirloom-mailx, |
| imx-gpu-viv, kodi-pvr-argustv, kodi-pvr-mediaportal-tvserver, |
| kodi-pvr-nextpvr, libfcgi, openssl, pifmrds, powerpc-utils, |
| python-m2crypto, slang, sox, squid, tn5250, xerces, zsh |
| |
| 2016.02-rc3, Released February 27th, 2016 |
| |
| Fixes all over the tree. |
| |
| Defconfigs: Ensure EABIhf is correctly enabled for ARM cores |
| where VFP is optional (but present on the specific hw). Fix |
| ARM variant selection for freescale_imx31_3stack_defconfig. |
| |
| Ensure tarballs of downloaded git trees do not contain a |
| timestamp. |
| |
| Clarify license of patches in COPYING. |
| |
| Updated/fixed package: avahi, binutils, cairo, can-festival, |
| chrony, cifs-utils, dnsmasq, dvdauthor, e2fsprogs, efl, |
| erlang-rebar, eudev, fbterm, gawk, gnupg2, gnuradio, gpm, |
| gst1-plugins-good, hostapd, imagemagick, iproute2, iputils, |
| jack2, kexec, kismet, lftp, libarchive, libeXosip2, libfm, |
| libglib2, libsoil, libssh, libssh2, libuci, links, lshw, lxc, |
| mediastreamer, mono, mraa, mutt, nfs-utils, numactl, ofono, |
| omniorb, openipmi, openobex, patch, pax-utils, perf, |
| pulseaudio, pure-ftp, qhull, qt, quagga, quota, sdl_sound, |
| shairport-sync, spice, sysklogd, syslog-ng, trace-cmd, |
| trousers, tvheadend, util-linux, vim, webkitgtk24, wireshark, |
| wpa_supplicant, xerces, zsh |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #8651: libMonoPosixHelper.so wrong link reference in buildroot.. |
| |
| 2016.02-rc2, Released February 18th, 2016 |
| |
| Fixes all over the tree. |
| |
| Toolchain: PR19405 backport to binutils 2.25.1 to fix NIOS ld |
| crash, backport of Xtensa .init/.fini literals handling. |
| glibc security patches for CVE-2014-8121, CVE-2015-1781 |
| and CVE-2015-7547. |
| |
| Defconfigs for Acmesystems Arietta g25 added. |
| |
| Updated/fixed packages: binutils, boost, chrony, dovecot, |
| e2fsprogs, fio, gdb, glibc, graphite2, icu, kbd, libbsd, |
| libcue, libgcrypt, libraw, links, mc, mosquitto, nodejs, |
| postgresql, pptp-linux, pulseaudio, samba4, spice, squid, |
| sysklogd, systemd, tiff, uclibc, ulogd, util-linux, valgrind. |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #8576: Building embedded Linux for Atmel SAMA5D4_Xplained... |
| #8606: Problem compiling on Arch Linux |
| #8681: kbd 2.0.3 does not build on rpi |
| |
| 2016.02-rc1, Released February 10th, 2016 |
| |
| Fixes all over the tree and new features. |
| |
| Toolchain: Support for GCC 5.3.x. ARC toolchain updated to |
| arc-2015.12. Support for legacy uClibc dropped, default to |
| uClibc-ng instead. Added sys/queue.h implementation for MUSL |
| for compatibility. Updated versions of Code sourcery and |
| Linaro toolchains. MIPS Codescape toolchains added. Version |
| selection for preconfigured external toolchains removed. |
| |
| New Defconfigs: ARM Juno r0/r1 development boards, Freescale |
| i.MX6UL Evaluation Kit, Intel Galileo Gen 2, Orange Pi PC. |
| A number of defconfigs have been extended to generate complete |
| system images using genimage. |
| |
| Linux: Automatically patch timeconst.pl for <3.9 kernels, |
| which isn't compatible with modern perl versions, breaking the |
| build when building on recent (Fedora 23, Debian |
| Testing/Unstable, ..) distributions. |
| |
| Makedevs utility now accepts textual (non-numerical) user and |
| group names. |
| |
| Vagrant file to easily setup a working development environment |
| in a VM has been added. |
| |
| Size-stats-compare script to compare rootfs sizes between |
| builds has been added. |
| |
| Infozip package renamed to zip. EFL packages restructured. |
| |
| Updated/fixed packages: aespipe, aiccu, alsa-lib, alsa-utils, |
| angularjs, apache, apr, argp-standalone, armadillo, arptables, |
| at, atk, audiofile, aumix, autoconf-archive, avahi, bash, bc, |
| bcache-tools, bdwgc, beecrypt, bind, binutils, bluez5_utils, |
| bluez_utils, bonnie, boost, busybox, cairo, cdrkit, chrony, |
| clamav, cmake, collectd, connman, coreutils, cppcms, crda, |
| cryptodev-linux, cryptsetup, cups, cwiid, cxxtest, dbus, |
| dbus-cpp, dbus-glib, debianutils, dhcp, dhcpcd, dhrystone, |
| dillo, directfb, directfb-examples, dmraid, dnsmasq, doom-wad, |
| dovecot, dovecot-pigeonhole, dropbear, dtv-scan-tables, |
| dvb-apps, dvbsnoop, ecryptfs-utils, eigen, ejabberd, |
| elementary, elfutils, enlightenment, erlang, espeak, eudev, |
| eventlog, exfat, exfat-utils, exiv2, expedite, faifa, |
| fakeroot, fastd, fbgrab, fetchmail, ffmpeg, findutils, fio, |
| firmware-imx, flann, flashrom, flite, flot, fmlib, freerdp, |
| freescale-imx, freetype, gauche, gawk, gcc, gcc-final, gcr, |
| gdb, gdk-pixbuf, geoip, gesftpserver, gettext, giflib, git, |
| glibc, glibmm, glog, gmp, gnupg, gnupg2, gnutls, gob2, gpsd, |
| gptfdisk, grep, gst1-libav, gst1-plugins-{bad,base,good,ugly}, |
| gst-ffmpeg, gst-plugins-{bad,base,good,ugly}, gstreamer, |
| gstreamer1, guile, gvfs, gzip, harfbuzz, haserl, hiawatha, |
| hostapd, hplip, icu, ifupdown, imagemagick, imx-gpu-viv, |
| imx-kobs, imx-lib, input-tools, intel-microcode, iperf3, |
| ipmitool, iproute2, iprutils, ipsec-tools, ipset, iptables, |
| iputils, irda-utils, irssi, iucode-tool, jack2, janus-gateway, |
| jpeg-turbo, jquery-datetimepicker, jquery-keyboard, |
| jquery-sparkline, jquery-ui, jquery-ui-themes, |
| jquery-validation, json-c, kbd, kernel-module-imx-gpu-viv, |
| keyutils, kmod, knock, kodi, lcdproc, lcms2, leafnode2, |
| leafpad, libass, libatomic_ops, libbroadvoice, libbsd, |
| libcap-ng, libcdaudio, libcue, libcurl, libdrm, libecore, |
| libedbus, libedit, libedje, libeet, libefreet, libeina, |
| libeio, libelementary, libembryo, libepoxy, libethumb, libev, |
| libevas, libevas-generic-loaders, libevdev, libevent, libffi, |
| libfm, libfribidi, libfslcodec, libfslparser, libfslvpuwrap, |
| libftdi, libfuse, libgail, libglew, libglib2, libgtk2, |
| libgtk3, libgudev, libhttpparser, libidn, libinput, libiscsi, |
| libjpeg, liblinear, libmbim, libmicrohttpd, libndp, libnspr, |
| libnss, liboauth, liboping, libpciaccess, libplist, libpng, |
| libraw, libraw1394, librsvg, libseccomp, libsecret, |
| libserialport, libsigc, libsigrok, libsigrokdecode, |
| libsndfile, libsoc, libsodium, libsoup, libssh2, libsvg, |
| libsvg-cairo, libtasn1, libtirpc, libtorrent, libungif, |
| libunwind, libupnpp, liburcu, libuv, libv4l, libva, |
| libva-intel-driver, libvips, libvncserver, libxml2, libxmlpp, |
| lightning, lighttpd, linknx, linux-firmware, linux-fusion, |
| linux-headers, liquid-dsp, lirc-tools, live555, lm-sensors, |
| lockdev, lshw, ltp-testsuite, ltrace, lttng-babeltrace, |
| lttng-libust, lttng-modules, lttng-tools, lua, luabitop, |
| luarocks, luv, lvm2, lxc, makedevs, mc, memcached, memtest86, |
| mesa3d, mesa3d-demos, mesa3d-headers, micropython, |
| micropython-lib, minicom, minidlna, mjpg-streamer, mke2img, |
| moarvm, modem-manager, mongoose, mongrel2, monkey, mono, |
| monolite, mosh, mosquitto, mpd, mplayer, msgpack, mtdev2tuio, |
| musepack, musl, mysql, nano, nasm, nbd, neard, netatalk, |
| netsnmp, nettle, net-tools, network-manager, nfs-utils, nginx, |
| nmap, nodejs, ntfs-3g, ntp, numactl, nut, nvidia-driver, |
| odhcp6c, ofono, ola, olsr, omniorb, opencv, opencv3, openipmi, |
| openldap, openntpd, openobex, openocd, openpgm, |
| open-plc-utils, openpowerlink, openssh, openssl, openswan, |
| openvpn, opkg, oprofile, opus, opusfile, p11-kit, package, |
| pango, pax-utils, pciutils, pcmanfm, perl, perl-db-file, |
| perl-io-socket-ssl, perl-libwww-perl, perl-net-dns, perl-uri, |
| perl-xml-libxml, php, php-ssh2, picocom, pinentry, pixman, |
| polarssl, popt, portaudio, pppd, procps-ng, proftpd, protobuf, |
| psmisc, ptpd2, pulseaudio, pulseview, pv, python, python3, |
| python-alsaaudio, python-can, python-cffi, python-cherrypy, |
| python-httplib2, python-jinja2, python-lxml, python-m2crypto, |
| python-mako, python-msgpack, python-psutil, python-pyasn, |
| python-pycparser, python-pydal, python-pyftpdlib, |
| python-pyroute2, python-pyxml, python-pyzmq, python-requests, |
| python-serial, python-setuptools, python-six, python-spidev, |
| python-tornado, python-twisted, python-web2py, python-webpy, |
| python-werkzeug, python-zope-interface, qemu, qhull, qpdf, qt, |
| qt5, qt5base, qt5connectivity, qt5declarative, qt5enginio, |
| qt5graphicaleffects, qt5imageformats, qt5multimedia, |
| qt5quick1, qt5quickcontrols, qt5script, qt5sensors, |
| qt5serialport, qt5svg, qt5webchannel, qt5webkit, |
| qt5webkit-examples, qt5websockets, qt5x11extras, |
| qt5xmlpatterns, qt-webkit-kiosk, racehound, radvd, read-edid, |
| readline, redis, rpcbind, rpi-firmware, rpi-userland, rrdtool, |
| rsync, rsyslog, rtai, rtorrent, rt-tests, rubix, ruby, samba4, |
| sconeserver, setools, shairport-sync, sigrok-cli, skeleton, |
| smack, snowball-init, socat, sp-oops-extract, sqlite, |
| squashfs, squeezelite, squid, sredird, sshfs, |
| start-stop-daemon, strace, strongswan, stunnel, subversion, |
| sunxi-tools, swig, sysdig, syslog-ng, sysstat, systemd, |
| sysvinit, taglib, tcl, tcpreplay, thrift, ti-gfx, tinyalsa, |
| tor, torsmo, trace-cmd, transmission, tremor, triggerhappy, |
| trinity, tvheadend, tzdata, uboot-tools, uclibc, udisks, |
| udpcast, unionfs, upmpdcli, usb_modeswitch, |
| usb_modeswitch_data, ustr, util-linux, vala, valgrind, |
| vboot-utils, vde2, vlc, vnstat, webkit, webkitgtk24, weston, |
| wget, whetstone, whois, wine, wipe, wireless-regdb, wireshark, |
| wpa_supplicant, w_scan, x11r7, xapp_xbacklight, xapp_xcompmgr, |
| xapp_xinput, xapp_xkbcomp, xdriver_xf86-input-evdev, |
| xdriver_xf86-input-libinput, xdriver_xf86-input-synaptics, |
| xdriver_xf86-video-ati, xdriver_xf86-video-fbturbo, |
| xdriver_xf86-video-imx-viv, xdriver_xf86-video-intel, |
| xfont_encodings, xfont_font-adobe-100dpi, |
| xfont_font-adobe-75dpi, xfont_font-adobe-utopia-100dpi, |
| xfont_font-adobe-utopia-75dpi, xfont_font-adobe-utopia-type1, |
| xfont_font-alias, xfont_font-arabic-misc, |
| xfont_font-bh-100dpi, xfont_font-bh-75dpi, |
| xfont_font-bh-lucidatypewriter-100dpi, |
| xfont_font-bh-lucidatypewriter-75dpi, xfont_font-bh-ttf, |
| xfont_font-bh-type1, xfont_font-bitstream-100dpi, |
| xfont_font-bitstream-75dpi, xfont_font-bitstream-type1, |
| xfont_font-cronyx-cyrillic, xfont_font-cursor-misc, |
| xfont_font-daewoo-misc, xfont_font-dec-misc, |
| xfont_font-ibm-type1, xfont_font-isas-misc, |
| xfont_font-jis-misc, xfont_font-micro-misc, |
| xfont_font-misc-cyrillic, xfont_font-misc-ethiopic, |
| xfont_font-misc-meltho, xfont_font-misc-misc, |
| xfont_font-mutt-misc, xfont_font-schumacher-misc, |
| xfont_font-screen-cyrillic, xfont_font-sony-misc, |
| xfont_font-sun-misc, xfont_font-winitzki-cyrillic, |
| xfont_font-xfree86-type1, xfsprogs, xkeyboard-config, xl2tp, |
| xlib_libfontenc, xlib_libXi, xmlstarlet, xscreensaver, |
| xserver_xorg-server, xtables-addons, xvkbd, xz, yad, yasm, |
| ympd, zeromq, zic, znc, zsh, |
| |
| New packages: acsccid, assimp, atkmm, autofs, bcm2835, |
| cairomm, cantarell, chocolate-doom, comix-cursors, cxxtest, |
| edid-decode, emlog, gcr, gtkmm3, hidapi, jquery-sidebar, |
| kernel-module-imx-gpu-viv, libasplib, libcroco, libdvbpsi, |
| libfreeglut, libgdiplus, libglfw, libhdhomerun, libnet, |
| libsoil, lldpd, luvi, mbedtls, minizip, miraclecast, mongodb, |
| mraa, netbsd-queue, netsniff-ng, nss-pam-ldapd, |
| obsidian-cursors, openal, openbox, pangomm, |
| python-backports-abc, python-beautifulsoup4, python-cbor, |
| python-click, python-cssselect, python-ecdsa, python-html5lib, |
| python-idna, python-ipaddress, python-mistune, python-netaddr, |
| python-paho-mqtt, python-paramiko, python-pyparted, |
| python-pysmb, python-pyudev, python-singledispatch, |
| python-smbus-cffi, python-urllib3, qt53d, rabbitmq-c, rfkill, |
| sbc, spi-tools, tpm-tools, trousers, ubus, unrar, unscd, |
| unzip, v4l2grab, xdriver_xf86-video-nouveau, xdotool, zbar |
| |
| Removed packages: libungif, python-pyxml, |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #7886: gettext: link failure with locally-installed libxml2 |
| #7892: systemd-journald is broken |
| #8066: nodejs crashes when built with gcc 4.9 |
| #8296: nodejs 0.12.7 - npm crashes (seg core dump) |
| #8501: gunzip fails to uncompress files |
| #8541: fail to build host-fakeroot-1.20.2 |
| #8546: build instructions for raspberry pi don't work |
| #8571: strace for ARC compile error |
| #8581: pciutils.mk PCIUTILS_MAKE_OPTS typo |
| #8616: Fail to build for raspberrypi_defconfig with big endian |
| #8621: sqlite package, properly enable readline |
| |
| 2015.11, Released November 30th, 2015 |
| |
| Minor fixes. |
| |
| Merged/seperate /usr handling is now also performed for |
| staging so cross-gdb / gdbserver can find the libraries. |
| |
| Updated/fixed packages: autossh, conntrack-tools, dcron, |
| espeak, gcc, glmark2, gpsd, gstreamer1, libglib2, libsigsegv, |
| libsoc, libv4l, minidlna, mongrel2, opencv, polarssl, |
| rpi-userland, rubix, skeleton, tovid, uemacs, valgrind, yad, |
| zmqpp |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #8441: Invalid directory for X11 fonts in target (RPi2) |
| #8491: libglib2 2.46.1 not Building for armv5 on 2015.11-rc3 |
| |
| 2015.11-rc3, Released November 26th, 2015 |
| |
| Fixes all over the tree. |
| |
| We have a new modern website! |
| |
| Updated/fixed packages: apitrace, audiofile, autossh, bullet, |
| c-ares, collectd, conntrack-tools, cryptodev-linux, dropbear, |
| fastd, gmp, gpsd, gst-plugins-bad, gst-plugins-base, |
| gst-plugins-good, gst-plugins-ugly, gstreamer, gstreamer1, |
| guile, iodine, iproute2, jimtcl, kompexsqlite, libethumb, |
| libfreeimage, libgsasl, libgtk3, libxml2, localedef, |
| lttng-tools, macchanger, mongrel2, mpd, openntpd, openssl, |
| oprofile, pcre, qt5base, quagga, rpi-userland, sconeserver, |
| sdl, spidev_test, sqlite, strongswan, ustr, xapp_sessreg, |
| yajl, zmqpp |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #6872: gpsd: disabled on microblaze |
| #8321: invalid opcode error with minidlna and ffmpeg |
| #8336: Default systemd configuration fails to boot correctly in 2015-08 |
| #8446: rpi-userland failed to build with glibc 2.22 |
| |
| 2015.11-rc2, Released November 19th, 2015 |
| |
| Fixes all over the tree. |
| |
| LD_LIBRARY_PATH is no longer used to ensure host binaries find |
| their libraries, fixing issues on recent Fedora. |
| |
| Toolchain fixes for powerpc e5500 / e6500. Fix for an issue |
| with ${TARGET}-cc after the move to use a toolchain wrapper |
| for the internal toolchain. |
| |
| Appy-patches.sh now correctly applies all files listed in |
| series files. |
| |
| Fixes for merged /usr handling when a custom skeleton is used. |
| |
| Updated/fixed packages: axfsutils, boost, busybox, dhcp, |
| directfb, dropbear, ebtables, fastd, ffmpeg, gauche, gcc, |
| gettext, gst1-plugins-bad, hostapd, ibrdtnd, libcurl, |
| libecore, libgudev, libnss, libpng, libserial, libssh2, |
| libuecc, libxml2, linux-headers, liquid-dsp, ltris, |
| lua-periphery, minidlna, mongrel2, mpd, mpg123, mplayer, |
| mysql, opencv, opencv3, package, perl-file-util, php-ssh2, |
| polarssl, pulseaudio, python-protobuf, qemu, qt5base, ranger, |
| ruby, skeleton, slang, squeezelite, strongswan, tovid, uclibc, |
| ushare, wine, wpa_supplicant, x265, |
| xdriver_xf86-video-siliconmotion, zxing-cpp |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #4790: Running udhcpc on a system with NFS root kills NFS |
| #8456: Building host-pkgconf on Fedora 23 fails due to.. |
| |
| 2015.11-rc1, Released November, 7th 2015 |
| |
| Fixes all over the tree and new features. |
| |
| Architectures: |
| |
| - Support for sparc64 added (internal toolchain with glibc |
| only). |
| |
| - Support for mips32r6 and mips64r6 added. |
| |
| - Support for Intel Quark X1000 CPU. |
| |
| - Switch to EABIhf by default on ARM when a VFP is available. |
| |
| Toolchains: |
| |
| - glibc 2.22, gdb 7.10, use gdb 7.9 by default, musl 1.1.12, |
| uclibc-ng 1.0.8, host-gdb enabled on AArch64. |
| |
| - The toolchain wrapper which was used only for external |
| toolchains is now also used for Buildroot internal |
| toolchains. This allowed to fix the ccache support, prepare |
| the way for top-level parallel build support and remove gcc |
| patches used to detect header/library path poisoning. |
| |
| - Remove Analog Devices Blackfin toolchain 2012R2. |
| |
| - Fix several Xtensa build failures by switching from |
| text-section-literals to auto-litpools. |
| |
| - Enable MIPS64 support in uClibc-ng, use uClibc on ARC |
| rather than a specific fork. |
| |
| - Linaro toolchains for ARM, ARMeb and AArch64 updated to |
| 2015.08. 2014.09 version is kept since 2015.08 only runs on |
| x86_64 hosts. |
| |
| Bootloaders: |
| |
| - Fix ARM64 support in U-Boot. |
| |
| Defconfigs: |
| |
| - Added: ARC HS38 VDK virtual boards, Avnet Microzed, Boundary |
| Devices Nitrogen SoloX, Freescale i.MX6 SoloX Sabre SD, |
| OLinuxino A20 Lime2, Qemu Sparc64, Qemu SuperH 4 big endian, |
| Synopsys AArch64 VDK virtual platform. |
| |
| - Updated: calao_qil_a9260, calao_usb_a9g20_lpw, ci20, |
| cubieboad, freescale_imx6_*, imx53loco, imx6_vab820, |
| mpc8315erdb, qmx6, p1010rdb, qemu, raspberrypi, |
| raspberrypi2, riotboard, snps_axs10*, wandboard. |
| |
| - Removed: at91rm9200df, at91sam9260dfc, at91sam9263ek, |
| calao_snowball_defconfig, gnublin, integrator926_defconfig. |
| |
| Infrastructure: |
| |
| - Support for fetching from Mercurial tags fixed. |
| |
| - Introduce LINUX_NEEDS_MODULES, which allows to enforce |
| module support to be enabled in the kernel when a package |
| builds out-of-tree kernel modules (through the |
| pkg-kernel-module infrastructure or on its own). |
| |
| - Improve the perl package infrastructure to automatically add |
| the dependency to the perl interpreter to target perl module |
| packages. |
| |
| - Remove trailing slashes in <pkg>_SITE and addition of a |
| check to ensure such trailing slashes are no longer added. |
| |
| - Extend the legal infrastructure to allow packages to declare |
| their actual source code. This is useful for packages for |
| which <pkg>_SOURCE points to pre-built binaries (as is the |
| case for external toolchains). The new <pkg>_ACTUAL_SOURCE |
| variable allows to point to the source code in such cases. |
| |
| - Improved ccache support, thanks to the usage of a toolchain |
| wrapper for internal toolchain. Now a single cache directory |
| can be shared between different Buildroot builds. |
| |
| - Addition of a 'graph-size' make targets, which generates a |
| PDF graph of per-package size of the root filesystem. |
| |
| - Addition of <pkg>_EXCLUDES so that packages can request |
| certain parts of the source code tarball to not be |
| extracted. This feature is currently used by gcc and |
| toolchain-external. |
| |
| - Packages can now use the <pkg>_PKGDIR variable, provided by |
| the package infrastructure, to reference their package |
| directory, instead of explicitly using package/<pkg>/. |
| |
| Filesystems: |
| |
| - Add high lz4 compression to squashfs. |
| |
| - Simplification of shell profile files in the default |
| skeleton. |
| |
| - Remove ftp user and /home/ftp from the skeleton, and let ftp |
| server packages create these when needed. |
| |
| - Add support for /bin, /sbin and /lib to be symlinks to their |
| corresponding directories in /usr. This is enforced for |
| systemd configurations, and optional for other |
| configurations. |
| |
| - Support for AXFS filesystem image generation added. |
| |
| - New options to add extra space/inodes to ext2/3/4 images. |
| |
| Updated/fixed packages: |
| |
| adwaita-icon-theme, apache, apitrace, atk, audit, avahi, |
| barebox, bash, batctl, bind, binutils, bluez_utils, boost, |
| bridge-utils, cairo, ccache, chrony, clapack, cloog, cmake, |
| collectd, connman, conntrack-tools, coreutils, cpio, |
| cryptsetup, dbus, dbus-cpp, devmem2, dhcp, dhcpcd, dhcpdump, |
| dhrystone, dillo, directfb, directfb-examples, dmraid, |
| dos2unix, dovecot, dovecot-pigeonhole, drbd-utils, dropbear, |
| dropwatch, dtc, e2fsprogs, ebtables, efl, eigen, ejabberd, |
| elf2flt, elfutils, erlang, ethtool, eudev, evemu, exfat, |
| exfat-utils, expat, faifa, fbterm, fdk-aac, feh, ffmpeg, file, |
| flashrom, fping, freerdp, freescale-imx, freetype, gdk-pixbuf, |
| genimage, gettext, git, glib-networking, glmark2, gnupg2, |
| gnuradio, gnutls, gpsd, grep, grub2, gst1-imx, gst1-libav, |
| gst1-plugins-bad, gst1-plugins-base, gst1-plugins-good, |
| gst1-plugins-ugly, gst1-validate, gst-fsl-plugins, |
| gst-plugins-bad, gstreamer1, guile, gvfs, harfbuzz, haveged, |
| hostapd, icu, imagemagick, impiutil, imx-gpu-viv, imx-vpu, |
| inadyn, intltool, iostat, iperf3, ipmiutil, iproute2, |
| iptables, iw, jpeg-turbo, jq, jsoncpp, kexec-lite, kmod, kodi, |
| kodi-audioencoder-flac, kodi-pvr-argustv, kodi-pvr-filmon, |
| kodi-pvr-hts, kodi-pvr-mythtv, kodi-pvr-pctv, |
| kodi-pvr-stalker, kodi-pvr-vbox, |
| kodi-visualisation-waveforhue, less, lftp, libbluray, |
| libcgroup, libconfuse, libcurl, libdcadec, libdrm, libevdev, |
| libffi, libfribidi, libfslcodec, libfslparser, libfslvpuwrap, |
| libgcrypt, libglew, libglib2, libgtk3, libidn, liblinear, |
| liblockfile, libmicrohttpd, libnetfilter_conntrack, libnfs, |
| libnftnl, libnl, libnspr, libnss, libpcap, libpfm4, libpng, |
| libselinux, libserial, libsoup, libsoxr, libstrophe, libtasn1, |
| libtirpc, libtorrent, libupnpp, liburcu, libusb-compat, libuv, |
| libv4l, libva, libva-intel-driver, libxcb, lighttpd, links, |
| linux, linux-firmware, linux-fusion, linux-headers, |
| lirc-tools, localedef, lpeg, lsof, ltp-testsuite, |
| lttng-libust, lttng-tools, lua-periphery, luaposix, lvm2, lxc, |
| lz4, mdadm, mesa3d, mesa3d-headers, minicom, minidlna, moarvm, |
| modem-manager, mosquitto, mpd, mpdecimal, mpg123, mplayer, |
| mrouted, msmtp, mtd, mutt, nettle, network-manager, nfs-utils, |
| nftables, nginx, nodejs, noip, ntp, ofono, opencv3, openpgm, |
| openssl, openswan, openvpn, pango, parted, perl, perl-cross, |
| perl-crypt-openssl-random, perl-http-message, |
| perl-io-socket-ssl, perl-module-build, perl-mojolicious, |
| perl-netaddr-ip, perl-net-dns, perl-net-http, perl-net-ssleay, |
| perl-uri, perl-xml-libxml, php, picocom, pixman, pkgconf, |
| poco, polarssl, portaudio, portmap, postgresql, proftpd, |
| protobuf, protobuf-c, pulseaudio, python-configshell-fb, |
| python-networkmanager, python-numpy, python-pyparsing, |
| python-pypcap, python-rtslib-fb, python-spidev, python-urwid, |
| python-web2py, qemu, qt5base, redis, rngtools, rng-tools, |
| rpi-firmware, rpi-userland, rtmpdump, rtorrent, ruby, samba, |
| samba4, sane-backends, sconeserver, sdl, sed, setools, |
| shairport-sync, shared-mime-info, sland, smartmontools, |
| softether, spice-protocol, sqlcipher, sqlite, squid, |
| strongswan, stunnel, subversion, sudo, sunxi-tools, |
| supervisor, systemd, tar, targetcli-fb, tcpdump, tiff, tor, |
| tvheadend, tzdata, uboot-tools, udisks, unionfs, upmpdcli, |
| util-linux, vala, valgrind, vim, vlc, vorbis-tools, vsftpd, |
| vtun, wavpack, webkitgtk24, weston, whois, wireless-regdb, |
| wireshark, wpa_supplicant, xdriver_xf86-input-vmmouse, |
| xdriver_xf86-video-imx-viv, xdriver_xf86-video-intel, |
| xdriver_xf86-video-sis, xlib_libXi, xorg-server, |
| xtables-addons, xterm, xz, zic, znc, zsh |
| |
| New packages: |
| |
| axfsutils, bitstream, check, dvblast, eventlog, fastd, gauche, |
| gmock, graphite2, gssdp, gupnp, gupnp-av, ibrcommon, ibrdtn, |
| ibrdtnd, ibrdtn-tools, imx-kobs, iqvlinux, irssi, |
| kompexsqlite, libbroadvoice, libcddb, libcodec2, libcrossguid, |
| libg7221, libhttpparser, libilbc, libldns, libmng, |
| libopenh264, libpam-radius-auth, libpam-tacplus, libsilk, |
| libsoundtouch, libssh, libuecc, libyuv, liquid-dsp, luv, |
| micropython, micropython-libs, python-pyratemp, |
| python-pyroute2, python-ranger, rapidxml, scrypt, sdl2, |
| sp-oops-extract, squeezelite, stress-ng, swupdate, syslog-ng, |
| x265, xdriver_xf86-video-fbturbo, xxhash, yad, zxing-cpp |
| |
| Removed packages: |
| |
| blackbox (was deprecated), divine (merged in directfb), |
| kobs-ng (replaced by imx-kobs), mediactl (merged in libv4l), |
| sawman (merged in directfb), schifra (marked broken since a |
| long time), texinfo (host variant only, no longer used), zxing |
| (replaced by zxing-cpp), |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #4099: cut utility from GNU coreutils works incorrect |
| #7772: libxml-parser-perl build failure: missing dependency |
| ExtUtils/MakeMaker |
| #7931: Default configuration for Cubieboard v1 is outdated |
| #8116: 2015.05-rc2 raspberrypi2_defconfig network interface |
| not coming up |
| #8246: X.org DRI2 build issue |
| #8256: pointing to /usr/bin/objcopy old version (x86) instead |
| of the generated one |
| #8266: mplayer build issue |
| #8281: pyrexc fails to run when path is too long |
| #8316: lttng-tools and lttng-babeltrace executables contain |
| bad RPATH pointing to host machine |
| #8331: kexec wants shutdown in /sbin, but systemd installs it |
| in /usr/sbin |
| #8361: Buildroot 2015.08.1 skeleton inittab overwritten by |
| busybox's version |
| #8366: libevent does not build |
| #8386: build failed with external toolchain |
| #8391: Node.js 0.12.7 fails to build on raspberry_pi defconfig |
| #8396: CCACHE initialization |
| #8401: gpsd 3.15 NMEA support |
| #8416: cups depends on BR2_DEPRECATED_SINCE_2015_05 |
| #8421: util-linux installs systemd files in output/target/home/ |
| |
| 2015.08, Released August 31st, 2015 |
| |
| Minor fixes. |
| |
| OpenCV 3.x package renamed to opencv3. OpenCV 2.4.x |
| reintroduced as opencv. |
| |
| Updated/fixed packages: bootutils, canfestival, cppcms, |
| curlftpfs, dhcpdump, dropbear, erlang-p1-tls, exfat, gnuradio, |
| ipkg, libgudev, libmbim, libwebsock, linux-pam, lm-sensors, |
| ltrace, midori, network-manager, openssh, perl-file-listing, |
| perl-http-cookies, perl-http-daemon, perl-http-negotiate, |
| perl-www-robotrules, python-can, qt5base, qt5multimedia, |
| setools, sysvinit, tinyalsa, tn5250, tvheadend, uboot, vlc, |
| x264, xserver_xorg-server, zyre |
| |
| 2015.08-rc2, Released August, 24th 2015 |
| |
| Fixes all over the tree. |
| |
| Toolchain: fix gcc build on NIOS-II. |
| |
| Infrastructure: add <fs>_POST_GEN_HOOKS mechanism to fix |
| hybrid ISO image generation. |
| |
| Architectures: add arm1136j-s variant. |
| |
| Updated/fixed packages: apitrace, audit, bcusdk, bdwgc, |
| beecrypt, boost, bwm-ng, cdrkit, c-icap, cifs-utils, clapack, |
| c-periphery, cpio, cramfs, czmq, dawgdic, dnsmasq, dosfstools, |
| dropbear, elfutils, empty, eudev, fan-ctrl, filemq, gnutls, |
| guile, haveged, imlib2, libcec, libepoxy, libev, libgpgme, |
| libiio, libnetfilter_queue, libnfnetlink, libpfm4, libpthsem, |
| librtas, libselinux, libsigsegv, libsodium, libv4l, lightning, |
| linux, lirc-tools, lrzsz, mono, mosh, mpd, msmtp, nbd, |
| netatalk, nodejs, ola, opencv, oprofile, php, poco, |
| postgresql, powertop, protobuf, protobuf-c, qt5base, |
| qt5quickcontrols, rapidjson, rng-tools, squid, sysdig, |
| sysstat, tftpd, tinc, tz, util-linux, webkitgtk24, weston, |
| wireshark, wvstreams, xdriver_xf86-input-synaptics, zyre. |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #8276: package/dropbear: symlink resolution incorrect |
| #8286: Error with buildroot |
| #8301: ldconfig parameter in Makefile |
| |
| 2015.08-rc1, Released August, 5th 2015 |
| |
| Fixes all over the tree and new features. |
| |
| Architectures: |
| |
| - Refactor how the availability of an MMU is described. |
| - Minimal support for Cortex-M3 |
| - Minimal support for AArch64 big-endian |
| |
| Toolchains: |
| |
| - Add CodeSourcery MIPS 2015.05, remove MIPS 2013.11 |
| - Use uClibc-ng as the default uClibc version, instead of the |
| official uClibc, which hasn't done any release since 3+ |
| years |
| - eglibc is now marked as deprecated |
| - GCC: gcc 4.9.x is now the default and was updated to 4.9.3, |
| support for gcc 5.x added. |
| - Binutils: use Binutils 2.24 as the default, 2.25.x series |
| bumped to 2.25.1, remove old Binutils 2.22. |
| - Update ARC toolchain components to 2015.06 |
| - Add support for Fortran when building gcc |
| |
| Bootloaders: |
| |
| - Support for using the kconfig configuration system in |
| U-Boot |
| |
| New Defconfigs: |
| |
| - VIA VAB-820/AMOS-820 |
| - OLimex OLinuxino A20 Lime |
| - Many new defconfigs for Atmel evaluation boards: |
| at91sam9rlek, at91sam9x5ek, sama5d3xek, sama5d4ek, sama5d4 |
| Xplained Ultra, sama5d3 Xplained. |
| - ACME Systems Aria G25 |
| - WarPboard |
| - Altera Cyclone 5 Development Board |
| - Xilinx zc706 |
| - ARC AXS101 and AXS103 Software Development Platforms |
| - Significant updates to Raspberry Pi / Raspberry Pi 2 |
| |
| Infrastructure: |
| |
| - Buildroot takes better care now of generating predictable |
| permissions in the target filesystem. However, existing |
| permissions on a custom skeleton or rootfs overlay will no |
| longer be preserved. Therefore, it is necessary to add a |
| permission table (BR2_ROOTFS_DEVICE_TABLE) to set the |
| required permissions. |
| - Add support for kconfig fragments. |
| - No longer pass --{enable,disable}-debug to autotools |
| packages depending on the value of |
| BR2_ENABLE_DEBUG. BR2_ENABLE_DEBUG now only controls |
| whether we build with -g or not. |
| - Support for extracting archives in .lzma in the generic |
| package infrastructure. |
| - Remove random-seed file from the default skeleton, since |
| seeding the entropy pool with a known seed makes more harm |
| than good. |
| - In the CVS download helper, add support to use a date as |
| the version. |
| - Add support for a per-package <pkg>_STRIP_COMPONENTS |
| variable, which packages can use to specify how many path |
| components should be stripped when extracting the tarball. |
| - Addition of a 'kernel-module' package infrastructure, which |
| simplifies the packaging of external kernel modules. Many |
| existing packages are converted to use it. |
| - Allow bootloaders to be implemented in $(BR2_EXTERNAL) |
| - Remove /etc/securetty from the default skeleton. |
| - Migration of sysV initscripts from the default skeleton to |
| a package called 'initscripts', installed only when Busbox |
| init or sysvinit are used. |
| - Migration of the skeleton logic to a proper 'skeleton' |
| package. |
| - Addition of a 'linux-tools' infrastructure in the 'linux' |
| package, to support building user-space tools bundled |
| within the Linux kernel sources, such as perf and cpupower. |
| - Usage of backticks instead of make $(shell ...) to execute |
| shell commands. This allows to delay the evaluation of such |
| commands when actually needed, and not when expanding the |
| variables. It is useful to make 'make printvars' less |
| noisy, and as a preparation to support top-level parallel |
| build. |
| - Libtool .la files are not mungled for all package types, |
| instead of being handled only for packages using the |
| autotools-package infrastructure. |
| - Add mechanism to allow packages to express a dependency on |
| gcc versions. This is needed for packages that use C++11 or |
| C11 support for example. |
| |
| Important package updates: |
| |
| - Complete rework of the matchbox packaging |
| - Lots of fixes in packages for compatibility with musl and |
| gcc 5. |
| - Hash files added to a large number of packages. |
| - Update a significant number of packages to use a new |
| hosting, after the announcement of Google Code and |
| Gitorious closing. |
| - Major packages needed for SELinux support have been merged, |
| but the support is not complete yet. |
| - Significant update of OpenCV to version 3.0, and addition |
| of lots of eatures. |
| - Significant update of all packages supporting the GPU and |
| VPU of i.MX ARM processors. |
| - Addition of systemd support in a significant number of |
| packages. |
| - Qt5 updated to 5.5.0 |
| - Use modular X.org server by default instead of KDrive |
| |
| Filesystems: |
| |
| - Complete overhaul of the iso9660 support. Now allows to use |
| directly IS9660 as the root filesystem format and not only |
| an initrd, and supports Grub 2 and isolinux in addition to |
| Grub. |
| |
| Updated packages: a10disp, agentpp, apache, at91bootstrap3, |
| audit, barebox, bc, bind, bmon, boost, btrfs-progs, |
| ca-certificates, can-utils, ccache, cloog, collectd, connman, |
| coreutils, c-periphery, cryptsetup, dado, dbus, dejavu, |
| dhcpcd, dnsmasq, dosfstools, dovecot, dovecot-pigeonhole, |
| e2fsprogs, ejabberd, erlang-p1-cache-tab, erlang-p1-sip, |
| erlang-p1-stringprep, erlang-p1-stun, erlang-p1-tls, |
| erlang-p1-utils, erlang-p1-xml, erlang-p1-yaml, ethtool, |
| eudev, evtest, exim, expect, explorercanvas, feh, ffmpeg, |
| file, flashrom, freescale-imx, freetype, gawk, gcc, gdb, |
| gettext, git, glib-networking, gnupg2, gnutls, gpsd, gptfdisk, |
| gpu-viv-bin-mx6q, gst-fsl-plugins, harfbuzz, hdparm, heimdal, |
| i2c-tools, imagemagick, imx-vpu, iproute2, ipset, isl, iw, |
| kodi, kodi-addon-xvdr, kodi-audioencoder-flac, |
| kodi-audioencoder-lame, kodi-audioencoder-vorbis, |
| kodi-audioencoder-wav, lftp, libass, libassuan, libcec, |
| libconfi, libcurl, libdrm, libevdev, libfreefare, libfslcodec, |
| libfslparser, libfslvpuwrap, libfuse, libglib2, libgpgme, |
| libgtk2, libgtk3, libical, libidn, libiio, libinput, libiscsi, |
| libllcp, libmicrohttpd, libnfc, libnss, libpcap, libpciaccess, |
| libpng, libserialport, libsigrok, libsoc, libtirpc, libubox, |
| libunistring, libupnp, libuv, libv4l, libva, |
| libva-intel-driver, libXrandr, lighttpd, linenoise, linux, |
| linux-firmware, linux-headers, live555, ltrace, lua, |
| lua-csnappy, lua-ev, luajit, lua-messagepack, luaperiphery, |
| lvm2, lxc, lzo, mesa3d, mesa3d-headers, midori, mmc-utils, |
| modem-manager, mono, mosquitto, mpd, mpd-mpc, mpfr, mpg123, |
| mtd, musl, nano, netperf, network-manager, nfs-utils, nginx, |
| nodejs, ntp, ola, opencv, openldap, openssh, openssl, |
| openswan, openvmtools, openvpn, opkg, orbit, orc, pcmanfm, |
| perl-cross, perl-encode-locale, perl-io-socket-ssl, |
| perl-mojolicious, perl-net-ssleay, perl-path-tiny, perl-uri, |
| perl-xml-libxml, php, pinentry, polarssl, postgresql, |
| pulseview, pure-ftpd, python, python-dpkt, python-lxml, |
| python-networkmanager, python-pyinotify, python-pypcap, |
| python-tornado, qextserialport, qt, qt5, rapidjson, redis, |
| rpcbind, rpi-firmware, rpi-userland, samba4, shairport-sync, |
| snmpp, sqlite, squid, strongswan, stunnel, sudo, sunxi-boards, |
| sunxi-mali, sysdig, sysstat, systemd, tcpdump, tiff, tmux, |
| tor, txheadend, tzdata, uboot, uclibc, ulogd, upmpdcli, |
| usb_modeswitch, usb_modeswitch_data, vala, vsftpd, wayland, |
| weston, whois, wireless-regdb, wireshark, x264, xapp_xvinfo, |
| xdriver_xf86-input-libinput, xdriver_xf86-input-vmmouse, |
| xdriver_xf86-video-cirrus, xdriver_xf86-video-geode, |
| xdriver_xf86-video-imx-viv, xdriver_xf86-video-mach64, |
| xdriver_xf86-video-neomagic, xdriver_xf86-video-r128, |
| xdriver_xf86-video-savage, xdriver_xf86-video-siliconmotion, |
| xdriver_xf86-video-vesa, xkeyboard-config, xlib_libfontenc, |
| xlib_libFS, xlib_libXaw, xlib_libxkbfile, xlib_libXrender, |
| xlib_libXt, xproto_kbproto, xproto_xproto, xproto_xrandrproto, |
| xscreensaver, xserver_xorg-server, xtables-addons, yaml-cpp, |
| zic. |
| |
| New packages: angularjs, atf, audit, c-icap, c-icap-modules, |
| cpio, dawgdic, faketime, fcgiwrap, gflags, glog, initscripts, |
| jquery-datetimepicker, kodi-audioencoder-modplug, |
| kodi-audioencoder-nosefar, kodi-audioencoder-sidplay, |
| kodi-audioencoder-snesapu, kodi-audioencoder-stsound, |
| kodi-audioencoder-timidity, kodi-audioencoder-vgmstream, |
| kodi-platform, kodi-pvr-argustv, kodi-pvr-dvblink, |
| kodi-pvr-dvbviewer, kodi-pvr-filmon, kodi-pvr-hts, |
| kodi-pvr-iptvsimple, kodi-pvr-mediaportal-tvserver, |
| kodi-pvr-mythtv, kodi-pvr-nextpvr, kodi-pvr-njoy, |
| kodi-pvr-pctv, kodi-pvr-stalker, kodi-pvr-vbox, |
| kodi-pvr-vdr-vnsi, kodi-pvr-vuplus, kodi-pvr-wmc, |
| kodi-screensaver-asteroids, kodi-screensaver-biogenesis, |
| kodi-screensaver-crystalmorph, kodi-screensaver-greynetic, |
| kodi-screensaver-pingpong, kodi-screensaver-pyro, |
| kodi-screensaver-stars, kodi-visualisation-shadertoy, |
| kodi-visualisation-spectrum, kodi-visualisation-waveforhue, |
| kodi-visualisation-waveform, kvmtool, kyua, libfm, |
| libfm-extra, libplatform, librtas, libsodium, libsquish, |
| libucl, libump, linux-backports, lua-iconv, lutok, menu-cache, |
| moarvm, monkey, mono-gtksharp3, mosh, openipmi, python-can, |
| python-pycli, python-pydal, python-pyyaml, python-web2py, |
| qpid-proton, qt5webchannel, quazip, racehound, rtl8188eu, |
| rtl8821au, sepolgen, setools, skeleton, stm32flash, |
| webkitgtk24, xdriver_xf86-video-qxl, zynq-boot-bin. |
| |
| Deprecated packages: webkitgtk, libgail, eglibc support in |
| glibc package. |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #4291: Segmentation fault with all binaries that use threads |
| when compiled with gcc 4.6 |
| #6944: building toolchain for sh4 fails |
| #7592: Buildroot GCC: -lto requires plugin support in ranlib |
| #7628: Python SSL does not get built for Raspberry Pi |
| #7682: Missing dependencies for NFS |
| #7742: dhcp lacks important features when BR2_ENABLE_DEBUG |
| #7754: make: *** [/..../buildroot-2014.11/output/build/host-gcc-initial-4.8.3/.stamp_built] Error 2 |
| #7946: libglib2-2.42.2 fails to build for sparc-buildroot-linux-gnu |
| #7956: glibc 2.20 and 2.21 fail to build for sh64-buildroot-linux-gnu |
| #7971: python-flask, python-werkzeug. No module named zlib |
| #7981: Target file system skeleton permissions hazard |
| #8006: rpcdebug in nfs-utils built for the host |
| #8036: alsa-lib headers problem that prevents to compile alsa |
| dependent projects |
| #8081: systemd init system: /tmp is not mode 1777 |
| #8121: php opcache extension doesn't get installed |
| #8151: x86-64 make fails with ncurses 5.9 |
| #8156: pkg-kconfig infra broken for *-update-{config, defconfig} |
| #8161: default /bin/sh symlink to busybox is full path and not relative |
| #8171: glamor missing |
| #8191: Request update support for the cubieboard series |
| #8201: Important security upgrades for node.js |
| |
| 2015.05, Released May 31st, 2015 |
| |
| Minor fixes. |
| |
| Updated/fixed packages: conntrack-tools, directfb, fio, flite, |
| gptfdisk, ipmiutil, iproute2, janus-gateway, keyutils, knock, |
| libelementary, libgcrypt, libgsasl, libjpeg, libstrophe, |
| lttng-libust, nbd, ncurses, nmap, php, postgresql, python, |
| python3, sconeserver, udpcast, upmpdcli |
| |
| 2015.05-rc3, Released May 22nd, 2015 |
| |
| Several fixes, mainly related to static linking. |
| |
| Updated/fixed packages: acl, alsa-utils, apr, armadillo, attr, |
| autoconf-archive, binutils, boost, czmq, dhcpcd, duma, |
| enlightenment, exim, fbterm, freerdp, gcc, gdk-pixbuf, |
| google-breakpad, gpsd, heirloom-mailx, hwloc, ipmiutil, |
| iproute2, jack2, jasper, kmod, lcdproc, leafnode2, libcap-ng, |
| libftdi1, libmatroska, libmemcached, libmodbus, libnftnl, |
| libsigrok, libupnpp, libuv, libxml-parser-perl, linux, |
| linux-headers, lirc-tools, lua-periphery, lxc, mongoose, mono, |
| mpg123, mosquitto, neardal, newt, ntp, ola, openldap, opencv, |
| php, postgresql, protobuf, pulseaudio, python-pyqt, qemu, qt, |
| qt5base, rpi-userland, rsyslog, snmppp, sqlite, tiff, |
| tinyxml2, uboot-tools, unionfs, ux5000-firmware, usbredir, |
| ushare, vpnc, vsftpd, wavpack, wireless_tools, wsapi, |
| wvstreams, xmlstarlet, zeromq, zmqpp |
| |
| New packages: c-periphery |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #8106: mkfs.jffs2 uses the --pagesize parameter incorrectly |
| #8111: 2015.05.rc2 LIBFOO_CONF_OPTS not working |
| #8126: exim lacks plaintext and cram-md5 auth |
| |
| 2015.05-rc2, Released May 11th, 2015 |
| |
| Minor fixes. |
| |
| Toolchain: PR56780 backport to GCC 4.8.4 to fix GDB linking |
| issues. Context functions enabled for uClibc snapshot / |
| uClibc-NG. |
| |
| Architectures: Endian handling symbol for Xtensa, binutils |
| fixes. |
| |
| Infrastructure: Fix for kernel module stripping when |
| localversion contains spaces. |
| |
| Updated/fixed packages: at, autoconf-archive, binutils, |
| cc-tool, cryptsetup, dstat, expedite, freerdp, giflib, |
| gnuchess, guile, ipmiutil, iproute2, mono, monolite, neard, |
| ola, poppler, postgresql, python-qt, qt, sqlite, valgrind, |
| xlib_libXfont |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #8086: Cannot select systemd as init with Linaro 2014.09... |
| |
| 2015.05-rc1, Released May 4th, 2015 |
| |
| Fixes all over the tree and new features. |
| |
| Architectures: Removed AVR32 support, deprecate SH64, added |
| support for steamroller, corei7-avx and core-avx2 x86 |
| variants. |
| |
| Toolchains: IPv6 and Largefile support now enforced for |
| uClibc. Corresponding Kconfig symbols removed. |
| |
| External CodeSourcery AMD64 2014.05, MUSL-cross 1.1.6 added, |
| CS sh2, Xilinx microblaze v2/14.3 removed. Distro-class |
| external toolchains are now detected and blacklisted. |
| |
| Internal toolchain support for Nios2 added, Blackfin |
| removed. Aarch64 and sh musl support. uClibc-ng support added. |
| |
| Libatomic is now handled for internal and external |
| toolchains. Link time optimization (LTO) support. |
| |
| New Defconfigs: Freescale i.MX28 EVK, i.MX31 PDK and SABRE |
| Auto, Raspberry Pi 2, RIoTboard, |
| |
| Infrastructure: Hashes for a large number of packages have |
| been added. Missing hashes now stop the build unless |
| explicitly disabled. |
| |
| Spaces and colons (:) are now supported in package |
| versions. Dependencies can now be listed for the patch step |
| (<PKG>_PATCH_DEPENDENCIES). Kconfig and Linux kernel |
| extensions infrastructure has been added. |
| |
| Makedevs now has a recursive (r) option. |
| |
| The variable containing the list of packages to build has been |
| renamed from TARGETS to PACKAGES. |
| |
| Make external-deps / legal-info / source / source-check have |
| been reimplemented using the package infrastructure, so their |
| output/behaviour may differ from earlier (some packages were |
| not included in the past). |
| |
| The old insecure DES password encoding is no longer supported. |
| |
| U-Boot patch option now support direct references to patch |
| files and URLs in addition to directories of patches. The |
| i.MX28 SD format (u-boot.sd) is now supported. |
| |
| Updated/fixed packages: agentpp, aircrack-ng, alsa-lib, |
| alsa-utils, apr-util, apr, atk, autossh, avahi, avrdude, |
| bcusdk, bdwgc, bind, binutils, bmon, boost, botan, |
| btrfs-progs, busybox, ca-certificates, cairo, can-utils, |
| canfestival, ccache, chrony, civetweb, clamav, cmake, |
| collectd, connman, copas, crda, cryptodev-linux, cryptsetup, |
| cups, czmq, dbus-cpp, dbus-glib, dbus-python, dbus, dfu-util, |
| dhcp, dhcpcd, dialog, dillo, dmraid, dnsmasq, dos2unix, |
| dosfstools, dovecot-pigeonhole, dovecot, dropbear, dropwatch, |
| dtv-scan-tables, dvdauthor, e2fsprogs, ecryptfs-utils, |
| libevas, elfutils, enscript, erlang, espeak, eudev, evemu, |
| exfat-utils, exim, f2fs-tools, feh, ffmpeg, fftw, flickcurl, |
| fltk, fluxbox, fmlib, fmtools, freeradius-client, freerdp, |
| gamin, gawk, gcc-final, gcc, gd, gdb, gengetopt, geoip, git, |
| glib-networking, gnu-efi, gnuchess, gnutls, gpsd, gptfdisk, |
| gpu-viv-bin-mx6q, gst-plugin-bad, gstreamer, gstreamer1, |
| gtest, gvfs, harfbuzz, haserl, haveged, hiawatha, |
| hicolor-icon-theme, hostapd, hplip, httping, i2c-tools, icu, |
| ifplugd, imagemagick, imlib2, iozone, iproute2, iptables, |
| iputils, irqbalance, iw, jack2, jhead, jimtcl, json-c, kexec, |
| kismet, kmod, kodi-audioencoder-flac, |
| kodi-audioencoder-vorbis, kodi-pvr-addons, kodi, ktap, lcms2, |
| libass, libatomic_ops, libbluray, libcap, libcgroup, libcurl, |
| libdrm, libdvbsi, libebml, libecore, libedit, liberation, |
| libev, libevas, libevdev, libftdi, libgcrypt, libglib2, |
| libgpgme, libgtk2, libgtk3, libiconv, libidn, libiio, |
| libinput, libiscsi, libksba, liblinear, libmatroska, |
| libmicrohttpd, libmodbus, libmpdclient, libnice, libnl, |
| libnspr, libnss, libpcap, libpciaccess, libphidget, libplayer, |
| libpthsem, libqmi, librsvg, libseccomp, libsigrok, libsoup, |
| libsrtp, libssh2, libtasn1, libtool, libunistring, liburcu, |
| libusb, libuv, libva-intel-driver, libva, libvncserver, |
| libvorbis, libvpx, libwebsockets, libxml2, libzip, lightning, |
| lighttpd, linknx, linphone, linux-firmware, linux-headers, |
| linux-pam, live555, ljsyscall, lmbench, lockdev, logrotate, |
| lpc3250loader, lpeg, lsof, lttng-libust, lttng-modules, |
| lttng-tools, lua, luacrypto, luafilesystem, luajit, luaposix, |
| luarocks, lvm2, lxc, make, |
| matchbox-{common,desktop,fakekey,keyboard,lib,startup-monitor,vm}, |
| matchbox, mcelog, memcached, memstat, memtest86, mesa3d, |
| minidlna, mjpegtools, mjpg-streamer, modem-manager, mongoose, |
| monit, mono, monolite, mp4v2, mpc, mpd, mpdecimal, mpg123, |
| mplayer, musl, nano, nbd, ncftp, ncmpc, ncurses, ne10, neard, |
| neardal, net-tools, netatalk, netsnmp, network-manager, nginx, |
| nodejs, ntfs-3g, ntp, numactl, odhcp6c, ofono, open2300, |
| opencv, openldap, openntpd, openocd, openssh, openssl, |
| openswan, opentyrian, openvmtools, openvpn, oprofile, p11-kit, |
| pango, patch, patchelf, pciutils, pcre, perf, perl-gdgraph, |
| perl-io-socket-ssl, perl-json-tiny, perl-module-build, |
| perl-mojolicious, perl-net-ssleay, perl-path-tiny, |
| perl-xml-libxml, perl, phidgetwebservice, php-gnupg, php, |
| pkgconf, polarssl, poppler, popt, postgresql, powerpc-utils, |
| pppd, prboom, procps-ng, proftpd, psplash, ptpd2, |
| python-{cheetah,coherence,django,markdown,netifaces,pam,six}, |
| python-tornado, python-twisted, python-zope-interface, python, |
| python3, qemu, qt, qt5, qt5base, qt5multimedia, |
| qt5xmlpatterns, qt5cinex, quagga, qwt, radvd, readline, |
| rng-tools, rpcbind, rpi-firmware, rpi-userland, rsync, |
| rsyslog, rtai, rtmpdump, ruby, sam-ba, samba, samba4, |
| sane-backends, sconeserver, shairport-sync, sigrok-cli, slang, |
| smcroute, snmppp, socat, socketcand, sofia-sip, sox, |
| spawn-fcgi, speex, sqlcipher, sqlite, squid, strace, |
| strongswan, stunnel, sudo, sunxi-boards, swig, sysstat, |
| systemd, tcpdump, tftpd, thrift, thttpd, ti-gfx, ti-utils, |
| tiff, tinyalsa, tn5250, transmission, trinity, tslib, |
| tvheadend, tzdata, uboot-tools, uclibc, ulogd, usb_modeswitch, |
| usbutils, ustr, util-linux, vala, valgrind, vlc, wayland, |
| webp, weston, wget, which, whois, wireless-regdb, |
| wireless_tools, wireshark, wpa_supplicant, wvstreams, |
| xapp_{bdftopcf,bitmap,fonttosfnt,fslsfonts}, |
| xapp_{fstobdf,iceauth,mkfontscale,oclock,rgb,sessreg,setxkbmap}, |
| xapp_{showfont,smproxy,twm,x11perf,xcalc,xclipboard,xcmsdb}, |
| xapp_{xdbedizzy,xditview,xdpyinfo,xdriinfo,xedit,xev,xeyes}, |
| xapp_{xf86dga,xfsinfo,xgamma,xgc,xhost,xinit,xinput,xkbcomp}, |
| xapp_{xkbevd,xkbprint,xlsatoms,xlsfonts,xmag,xman,xmh,xmodmap}, |
| xapp_xmore, xcb-util-image, xcb-util-keysyms, |
| xdata_xcursor-themes, |
| xdriver_xf86-input-{evdev,keyboard,synaptics,void}, |
| xdriver_xf86-video-{ati,cirrus,geode,mach64,mga,neomagic}, |
| xdriver_xf86-video-{r128,savage,siliconmotion,sis,tdfx}, |
| xdriver_xf86-video-{trident,vmware,voodoo}, xenomai, |
| xfont_font-util, xkeyboard-config, |
| xlib_lib{ICE,X11,Xdmcp,Xfont,Xpm,XvMC}, |
| xlib_lib{Xxf86vm,xshmfence,xtrans}, xproto_randrproto, |
| xproto_xproto, xserver_xorg-server, x11vnc, x264, xerces, |
| xorriso, xterm, xz, yaml-cpp, zeromq, zic, zmqpp |
| |
| New packages: apache, autoconf-archive, batctl, |
| bitstream-vera, bullet, cc-tool, doxygen, drbd-utils, |
| dvdrw-tools, gnuradio, gst1-imx, hans, hwloc, ijs, |
| imx-usb-loader, inconsolata, iodine, iotop, ipmiutil, jsoncpp, |
| leveldb, libdcadec, libdri2, libfreeimage, libftdi1, |
| libsidplay2, lirc-tools, lua-periphery, mc, mesa3d-headers, |
| mosquitto, nvidia-driver, nvidia-tegra23{,-binaries,-codecs}, |
| openjpeg, opusfile, perl-crypt-openssl-{random,rsa}, |
| perl-db-file, perl-digest-{hmac,sha1}, |
| perl-encode-{detect,locale}, perl-file-{listing,util}, |
| perl-html-{parser,tagset}, perl-http-cookies, |
| perl-http-{daemon,date,message,negotiate}, perl-io-html, |
| perl-libwww-perl, perl-lwp-mediatypes, perl-mail-dkim, |
| perl-mailtools, perl-mime-base64, perl-net-{dns,http}, |
| perl-netaddr-ip, perl-time-hires, perl-timedate, perl-uri, |
| perl-www-robotrules, powertop, pulseview, |
| python-{cherrypy,lxml,mako,pyqt,pyxml,sip,spidev,ws4py}, qpdf, |
| qt-webkit-kiosk, sl, softether, sysdig, tinyxml2, tor, tovid, |
| unixodbc, wf111, wine, libepoxy, xapp_xcompmgr, |
| xapp_xfindproxy, xcb-util-cursor, xcb-util-renderutil, |
| xdriver_xf86-input-libinput, xdriver_xf86-video-imx{,-viv}, |
| xproto_xproxymanagementprotocol |
| |
| Removed packages: gtk2-theme-hicolor |
| |
| Deprecated packages: samba |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #7478: Multiple chosen python modules are not built due to... |
| #7508: Use of BR2_EXTERNAL and dependencies to existing packages |
| #7676: Package procps-ng installs binaries to nonsensical folder |
| #7724: Startx is not installed in the target |
| #7760: botan: wrong prefix in botan-1.10.pc |
| #7826: Building of cdparanoia |
| #7844: Lua with hard-float on MIPS by buildroot doesn't work |
| #7874: X.org configure error |
| #7941: glibc-2.20 fails to build for sparc-buildroot-linux-gnu |
| #7951: gcc 4.9.2 fails to build for sparc-buildroot-linux-gnu |
| #7961: Qt5 fails to build for xtensa-buildroot-linux-uclibc |
| #7976: mkuser script fails with: user already exists with... |
| #8011: When building only busybox and strace, strace fails... |
| #8016: collectd fails to build, network.c:171:19: error:... |
| #8041: error on building libcurl7.42.0 |
| |
| 2015.02, Released March 1st, 2015 |
| |
| Minor fixes. |
| |
| Updated/fixed packages: civetweb, ding-libs, |
| directfb-examples, glibc, gnupg, gnupg2, gpm, |
| gst-plugins-good, gst1-plugins-good, freetype, libao, libevas, |
| libevent, libfribidi, libgcrypt, libgtk2, libshout, libsrtp, |
| libtheora, libupnpp, libxmlrpc, linux, make, opus, pinentry, |
| rpi-firmware, shared-mime-info, vlc, vorbis-tools, |
| xcb-util-keysyms |
| |
| Removed packages: libgc |
| |
| 2015.02-rc3, Released February 24th, 2015 |
| |
| Minor fixes. |
| |
| Cmake and rebar (erlang) infrastructure fixes. |
| |
| Updated/fixed packages: bind, btrfs-progs, busybox, e2fsprogs, |
| evtest, ffmpeg, fltk, gnutls, i2c-tools, imagemagick, libxcb, |
| make, mjpg-streamer, netsnmp, opentyrian, php, polarssl, |
| qt5base, samba, samba4, sudo, util-linux, xserver_xorg-server |
| |
| 2015.02-rc2, Released February 15th, 2015 |
| |
| Minor fixes. |
| |
| raspberrypi: fix kernel sha1 for DT variant. |
| |
| Updated/fixed packages: dbus, dvdauthor, git, libsemanage, |
| libsepol, libssh2, mplayer, ntp, openvmtools, python3, |
| qt5base, qt5connectivity, xserver_xorg-server |
| |
| 2015.02-rc1, Released February 8th, 2015 |
| |
| Fixes all over the tree and new features. |
| |
| Static/shared library handling reworked. This is now a |
| tristate (shared only / shared and static / static |
| only). Default is now shared only to speed up the |
| build. BR2_PREFER_STATIC_LIB is now called BR2_STATIC_LIBS. |
| |
| The toolchain (internal and external) will now warn when an |
| unsafe library or header path is used (such as /usr/include or |
| /usr/lib). If BR2_COMPILER_PARANOID_UNSAFE_PATH is enabled |
| under build options this instead becomes an error. |
| |
| A installation path issue with the internal musl toolchain |
| support has been fixed so it is now possible to reuse it as an |
| external toolchain. |
| |
| Architectures: Freescale E5500 and E6500 PowerPC support |
| added, deprecated MIPS 1/2/3/4 support removed. |
| |
| New defconfigs: Freescale p2020ds, MIPS creator CI20, |
| Raspberrypi with DT, UDOO Quad. |
| |
| 'make <foo>_defconfig' now saves the path to the defconfig in |
| the .config, so a 'make savedefconfig' automatically updates |
| it. |
| |
| Infrastructure for packages using the Erland rebar tool has |
| been added. |
| |
| Hashes for a large number of packages have been added. Hashes |
| are now checked for both target and host packages. |
| |
| The system menu now has an option to automatically configure a |
| network interface through DHCP at bootup. |
| |
| The default filesystem skeleton now uses a separate tmpfs for |
| /run instead of a symlink to /tmp/ for security reasons / to |
| protect against conflicts with user generated temporary files. |
| |
| BR2_EXTERNAL is now exported to post-build and post-image |
| scripts. |
| |
| New packages: bdwgc, benejson, blktrace, bootstrap, cgic, |
| ding-libs, dvdauthor, ejabberd, erlang-goldrush, erlang-lager, |
| erlang-p1-cache-tab, erlang-p1-iconv, erlang-p1-sip, |
| erlang-p1-stringprep, erlang-p1-stun, erlang-p1-tls, |
| erlang-p1-utils, erlang-p1-xml, erlang-p1-yaml, |
| erlang-p1-zlib, exiv2, freeradius-client, gengetopt, glmark2, |
| gpu-amd-bin-mx51, guile, host-qemu, ifupdown, iperf3, |
| janus-gateway, kodi, kodi-audioencoder-flac, |
| kodi-audioencoder-lame, kodi-audioencoder-vorbis, |
| kodi-audioencoder-wav, libcli, libiio, liblinear, libnice, |
| libselinux, libsemanage, libserialport, libsigro, |
| libsigrokdecode, libsrtp, liburiparser, libvips, libwebsock, |
| libz160, libzip, lightning, mcelog, memtest86, mjpegtools, |
| mjpg-streamer, mke2img, mpd-mpc, netsurf-buildsystem, odhcp6c, |
| openldap, python-alsaaudio, python-certifi, python-cheetah, |
| python-coherence, python-django, python-docopt, python-enum, |
| python-enum34, python-flask, python-gobject, python-httplib2, |
| python-ipaddr, python-itsdangerous, python-jinja, |
| python-markdown, python-markupsafe, python-networkmanager, |
| python-pam, python-psutil, python-pyftpdlib, python-pyinotify, |
| python-pysendfile, python-pyxb, python-requests, python-six, |
| python-twisted, python-webpy, python-werkzeug, |
| python-zope-interface, qt5cinex, sigrok-cli, sofia-sip, |
| start-stop-daemon, szip, triggerhappy, ustr, vnstat, xorriso, |
| xtables-addons |
| |
| Removed packages (target): bison, distcc, gob2, m4 |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #7556: make interactive CLI optional for nftables |
| #7730: Error while connecting Qt Cretaor to device |
| #7766: logrotate default gzip path is usually wrong |
| #7790: Invalid ext4 image generated by Buildroot |
| |
| 2014.11, Released December 1st, 2014 |
| |
| Minor fixes. |
| |
| Infrastructure: LD_LIBRARY_PATH handling tweak to ensure |
| current working directory isn't searched. |
| |
| Updated/fixed packages: gd, gdb, libwebsockets, luajit, mono, |
| parted, shairport-sync, util-linux, xapp_bdftopcf, |
| xserver_xorg-server |
| |
| 2014.11-rc3, Released November 28th, 2014 |
| |
| Fixes all over the tree. |
| |
| System: File permissions of /etc/random-seed made more |
| restrictive. |
| |
| Toolchain: Various fixes related to locale handling, a fix for |
| building the toolchain wrapper on MIPS. |
| |
| Updated/fixed packages: bind, binutils. botan, btrfsprogs, |
| clamav, czmq, dhcp, dillo, dovecot, erlang, flac, gd, glibc, |
| gptfdisk, gst1-validate, heirloom-mailx, lame, libksba, |
| libllcp, libnspr, libpng, libshairplay, libtirpc, linux, |
| linux-headers, mpdecimal, mpg123, network-manager, nfstables, |
| nfs-utils, openssl, pcituils, qt, radvd, rtai, sqlcipher, |
| sstrip, tcpdump, uclibc, uemacs, ushare, wayland, weston, |
| xl2tp, xserver_xorg-server |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #7670: Fails to build mpc-1.0.2 on latest Cygwin |
| |
| 2014.11-rc2, Released November 21st, 2014 |
| |
| Fixes all over the tree. |
| |
| Inittab tweaks for shutdown handling (busybox and sysvinit). |
| |
| Updated/fixed packages: aircrack-ng, botan, canfestival, |
| clamav, coreutils, czmq, dbus, dovecot, duma, e2fsprogs, |
| erlang, gcc, iputils, libcap, libgcrypt, libmemcached, |
| libssh2, libunwind, libv4l, linux-headers, mesa3d-demos, mutt, |
| mysql, ndisc6, nodejs, omniorb, perl-cross, php, |
| python-tornado, python3, qemu, qt5base, qt5webkit, rpm, |
| rt-tests, ruby, schifra, sdl_sound, shairport-sync, sysvinit, |
| tstools, tzdata, wireshark, x264 |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #7646: strftime on datetime not works on python3 |
| |
| 2014.11-rc1, Released November 12th, 2014 |
| |
| Fixes all over the tree and new features. |
| |
| Toolchains: Use -mcpu / -march instead of -mtune. Support |
| additional ARC and sparc variants. Updated Code sourcery |
| and Linaro external toolchains. |
| |
| Defconfigs: Freescale iMX6DL SabreSD, Minnowboard MAX, QEMU |
| powerpc64 pseries added and a number of updates to the |
| existing configurations. |
| |
| Infrastructure: Buildroot is now less noisy when built with |
| the silent option (make -s). |
| A number of package infrastructure variables have been renamed |
| from *_OPT to *_OPTS for constency. Buildroot will complain if |
| the old names are used to assist in updating out of tree |
| packages. |
| Fixes for host systems where bash isn't located in /bin, and |
| older systems not supporting mktemp --tmpdir. |
| Various cleanups of users/groups in the default skeleton. |
| There is now an option to choose what shell /bin/sh points to. |
| |
| Documentation: Various updates to the user manual. The |
| asciidoc documentation handling has now been extended so it |
| can be used by (BR2_EXTERNAL) packages. |
| |
| Updated/fixed packages: acl, acpid, agentpp, aircrack-ng, |
| alsa-lib, alsamixergui, alsa-utils, apitrace, apr, apr-util, |
| argus, arptables, at, atftp, atk, attr, audiofile, aumix, |
| automake, autossh, avahi, avrdude, axel, bandwidthd, bash, |
| bcusdk, beecrypt, bind, binutils, blackbox, bluez5_utils, |
| bluez_utils, bmon, boost, bootutils, bridge-utils, |
| btrfs-progs, busybox, bwm-ng, bzip2, ca-certificates, cairo, |
| ccache, ccid, ccrypt, cdrkit, cegui06, celt051, chrony, |
| cifs-utils, civetweb, cjson, clapack, classpath, cloog, cmake, |
| collectd, connman, copas, coreutils, coxpcall, cppcms, cppdb, |
| cppzmq, cramfs, crda, cryptsetup, ctorrent, cups, cvs, cwiid, |
| czmq, dash, dbus, dbus-cpp, dbus-glib, dbus-python, dejavu, |
| dhcp, dhcpcd, dhcpdump, dialog, dillo, directfb, distcc, |
| dmalloc, dmidecode, dmraid, dnsmasq, doc-asciidoc.mk, |
| dosfstools, dropbear, dropwatch, dstat, dtach, dtc, dvbsnoop, |
| e2fsprogs, ecryptfs-utils, ed, efl, eigen, elf2flt, elfutils, |
| enlightenment, enscript, erlang, espeak, ethtool, eudev, |
| evemu, evtest, exfat, exfat-utils, exim, expat, expect, |
| explorercanvas, faifa, fakeroot, fan-ctrl, fbdump, |
| fb-test-app, fetchmail, ffmpeg, file, filemq, findutils, flac, |
| flann, flickcurl, flite, fltk, fluxbox, fmc, fmlib, |
| fontconfig, foomatic-filters, freerdp, freescale-imx, |
| freetype, ftop, fxload, gamin, gcc, gd, gdb, gdk-pixbuf, |
| genimage, genpart, genromfs, geoip, gettext, giblib, git, |
| glibc, glib-networking, gmp, gmpc, gnu-efi, gnupg, gnupg2, |
| gnuplot, gnutls, google-breakpad, gpm, gpsd, gptfdisk, |
| gpu-viv-bin-mx6q, grantlee, grep, gsl, gst1-libav, |
| gst1-plugins-{bad,base,good,ugly}, gst-ffmpeg, |
| gst-fsl-plugins, gst-omx, gst-plugins-{bad,base,good,ugly}, |
| gst-plugin-x170, gstreamer, gstreamer1, gtest, gtk2-engines, |
| gutenprint, gvfs, harfbuzz, haserl, haveged, hdparm, heimdal, |
| heirloom-mailx, hiawatha, hostapd, hplip, htop, httping, |
| hwdata, i2c-tools, icu, ifplugd, igh-ethercat, imagemagick, |
| imlib2, imx-lib, imx-vpu, inadyn, inotify-tools, input-tools, |
| intltool, iperf, iproute2, iprutils, ipsec-tools, ipset, |
| iptables, iputils, iw, jamvm, jansson, jasper, jimtcl, joe, |
| jpeg-turbo, jq, jquery-keyboard, jquery-mobile, jquery-ui, |
| jquery-ui-themes, jquery-validation, jsmin, json-c, |
| json-javascript, kbd, kexec, kexec-lite, keyutils, kismet, |
| kmod, knock, ktap, lame, lbase64, lbreakout2, lcdproc, lcms2, |
| lesstif, lftp, libaio, libao, libarchive, libargtable2, |
| libass, libassuan, libatasmart, libbluray, libbsd, libcap, |
| libcap-ng, libcdio, libcec, libcgicc, libcgroup, libcofi, |
| libconfig, libconfuse, libcurl, libdaemon, libdnet, libdrm, |
| libdvdnav, libecore, libedbus, libedit, libedje, libeet, |
| libelementary, libelf, libenca, libethumb, libevas, |
| libevas-generic-loaders, libevent, libexif, libeXosip2, |
| libffi, libftdi, libfuse, libgail, libgcrypt, libgeotiff, |
| libglade, libglib2, libgpgme, libgtk2, libhid, libidn, |
| libinput, libiscsi, libjson, libksba, liblockfile, |
| liblog4c-localtime, liblogging, libmad, libmatroska, libmbim, |
| libmemcached, libmicrohttpd, libmpdclient, libmpeg2, libndp, |
| libnfc, libnfs, libnftnl, libnl, libnspr, libnss, liboauth, |
| libogg, liboping, libosip2, libpcap, libpciaccess, libpfm4, |
| libplayer, libplist, libpng, libpthsem, libqmi, libqrencode, |
| libraw, libreplaygain, libroxml, librsvg, librtlsdr, |
| libsamplerate, libseccomp, libsecret, libshairplay, libsoc, |
| libsoup, libsoxr, libssh2, libstrophe, libsvg, libsvg-cairo, |
| libtasn1, libtheora, libtirpc, libtorrent, libubox, libuci, |
| libungif, liburcu, libusb, libuv, libv4l, libva, |
| libva-intel-driver, libvncserver, libvorbis, libvpx, |
| libwebsockets, libxcb, libxml2, libxml-parser-perl, libxmlrpc, |
| libxslt, lighttpd, linenoise, linknx, links, linphone, |
| linux-firmware, linux-fusion, linux-headers, linux-pam, |
| linux-zigbee, lite, live555, ljlinenoise, lmbench, lm-sensors, |
| localedef, lockdev, lockfile-progs, log4cxx, lpty, lrandom, |
| lrzsz, lshw, lsof, lsqlite3, ltp-testsuite, ltrace, ltris, |
| lttng-babeltrace, lttng-libust, lttng-modules, lttng-tools, |
| lua, luabitop, lua-coat, lua-coatpersistent, lua-csnappy, |
| lua-ev, luajit, luajson, lualogging, lua-messagepack, |
| lua-msgpack-native, luaposix, luarocks, luasec, luasocket, |
| luasql-sqlite3, lua-testmore, lunit, lvm2, lxc, lz4, lzlib, |
| lzma, m4, madplay, make, makedevs, Makefile.in, |
| matchbox-common, matchbox-desktop, matchbox-fakekey, |
| matchbox-keyboard, matchbox-lib, matchbox-panel, |
| matchbox-startup-monitor, matchbox-wm, mcrypt, mdadm, |
| media-ctl, mediastreamer, memcached, memstat, memtester, |
| mesa3d, metacity, midori, mii-diag, minidlna, mmc-utils, |
| modem-manager, mongoose, mongrel2, monit, mpc, mpd, mpdecimal, |
| mpfr, mpg123, mplayer, mrouted, msmtp, mtd, mtools, mtr, |
| musepack, musl, mutt, mxml, mysql, nano, nanocom, nbd, ncftp, |
| ncurses, ndisc6, ne10, neard, neon, netatalk, netperf, |
| netsnmp, nettle, net-tools, network-manager, newt, nfs-utils, |
| ngrep, nmap, nodejs, nss-mdns, ntfs-3g, ntp, numactl, nut, |
| nuttcp, ofono, ola, omap-u-boot-utils, omniorb, |
| on2-8170-modules, opencore-amr, opencv, openntpd, openobex, |
| openocd, openpowerlink, openssh, openssl, openswan, |
| opentyrian, opentyrian-data, openvpn, opkg, oprofile, opus, |
| opus-tools, orbit, orc, ortp, p11-kit, pango, parted, |
| pciutils, pcmanfm, pcre, pcsc-lite, perf, perl, perl-gd, |
| perl-gdgraph, perl-io-socket-ssl, perl-json-tiny, |
| perl-module-build, perl-mojolicious, perl-net-ssleay, |
| perl-path-tiny, perl-xml-libxml, perl-xml-parser, php, |
| php-geoip, php-gnupg, php-imagick, php-memcached, php-ssh2, |
| php-yaml, php-zmq, picocom, pifmrds, pinentry, pixman, |
| pkg-autotools.mk, pkg-cmake.mk, pkg-download.mk, |
| pkg-generic.mk, pkg-kconfig.mk, pkg-luarocks.mk, pkg-perl.mk, |
| pkg-python.mk, pkg-utils.mk, poco, polarssl, polkit, poppler, |
| popt, portaudio, portmap, postgresql, powerpc-utils, pppd, |
| pptp-linux, prboom, procps-ng, proftpd, protobuf, protobuf-c, |
| psmisc, ptpd2, pulseaudio, pv, pwgen, python, python3, |
| python-dialog, python-ipy, python-keyring, python-mad, |
| python-netifaces, python-numpy, python-protobuf, python-pyasn, |
| python-pyparsing, python-pyro, python-pyusb, python-serial, |
| python-setuptools, qdecoder, qemu, qextserialport, qjson, qt, |
| qt5, qt5base, qt5connectivity, qt5declarative, qt5enginio, |
| qt5graphicaleffects, qt5imageformats, qt5multimedia, |
| qt5quick1, qt5quickcontrols, qt5script, qt5sensors, |
| qt5serialport, qt5svg, qt5webkit, qt5webkit-examples, |
| qt5websockets, qt5x11extras, qt5xmlpatterns, qtuio, quagga, |
| quota, qwt, radvd, rapidjson, rdesktop, redis, rings, rpcbind, |
| rpi-firmware, rpi-userland, rpm, rp-pppoe, rrdtool, |
| rsh-redone, rsync, rsyslog, rtai, rtmpdump, rt-tests, rubix, |
| ruby, samba, sam-ba, samba4, sane-backends, schifra, |
| sconeserver, scons, screen, sdl, sdl_gfx, sdl_image, |
| sdl_mixer, sdl_net, sdl_sound, sdl_ttf, sed, ser2net, |
| setserial, sg3_utils, shared-mime-info, simicsfs, sispmctl, |
| slang, slirp, smcroute, smstools3, snmppp, |
| snowball-hdmiservice, socat, socketcand, sox, spawn-fcgi, |
| speex, spice, spice-protocol, sqlcipher, sqlite, squashfs, |
| squid, sredird, startup-notification, strace, stress, |
| strongswan, stunnel, subversion, sudo, sunxi-boards, |
| sunxi-cedarx, swig, sylpheed, synergy, sysklogd, sysstat, |
| systemd, sysvinit, taglib, tar, tcl, tcllib, tcpdump, |
| tcpreplay, texinfo, tftpd, thrift, thttpd, tiff, ti-utils, |
| tn5250, torsmo, trace-cmd, transmission, tslib, tstools, |
| tvheadend, twolame, tz, uboot-tools, uclibc, udisks, ulogd, |
| upmpdcli, upx, urg, usb_modeswitch, usbmount, usbredir, |
| usbutils, util-linux, valgrind, vde2, vim, vlc, vo-aacenc, |
| vorbis-tools, vpnc, vsftpd, vtun, wayland, webkit, webp, |
| webrtc-audio-processing, weston, wget, whois, wireless-regdb, |
| wireshark, wpa_supplicant, wvstreams, x11r7, x11vnc, |
| xapp_xcalc, xapp_xdm, xapp_xdpyinfo, xapp_xf86dga, xapp_xfs, |
| xapp_xinit, xapp_xkbevd, xapp_xmh, xapp_xrandr, xapp_xsm, |
| xbmc, xbmc-pvr-addons, xcb-proto, xcursor-transparent-theme, |
| xdriver_xf86-input-mouse, xdriver_xf86-video-{ast,intel}, |
| xdriver_xf86-video-vmware, xenomai, xerces, |
| xfont_font-adobe-{100,75}dpi, |
| xfont_font-adobe-utopia-{100dpi,75dpi,type1}, |
| xfont_font-alias, xfont_font-arabic-misc, |
| xfont_font-bh-100dpi, xfont_font-bh-75dpi, |
| xfont_font-bh-lucidatypewriter-100dpi, |
| xfont_font-bh-lucidatypewriter-75dpi, xfont_font-bh-ttf, |
| xfont_font-bh-type1, xfont_font-bitstream-100dpi, |
| xfont_font-bitstream-75dpi, xfont_font-bitstream-type1, |
| xfont_font-cronyx-cyrillic, xfont_font-cursor-misc, |
| xfont_font-daewoo-misc, xfont_font-dec-misc, |
| xfont_font-ibm-type1, xfont_font-isas-misc, |
| xfont_font-jis-misc, xfont_font-micro-misc, |
| xfont_font-misc-cyrillic, xfont_font-misc-ethiopic, |
| xfont_font-misc-meltho, xfont_font-misc-misc, |
| xfont_font-mutt-misc, xfont_font-schumacher-misc, |
| xfont_font-screen-cyrillic, xfont_font-sony-misc, |
| xfont_font-sun-misc, xfont_font-winitzki-cyrillic, |
| xfont_font-xfree86-type1, xfsprogs, xinetd, xkeyboard-config, |
| xlib_libdmx, xlib_libFS, xlib_libpciaccess, xlib_libSM, |
| xlib_libX11, xlib_libXaw, xlib_libXext, xlib_libXfont, |
| xlib_libXi, xlib_libXinerama, xlib_libXrandr, xlib_libXrender, |
| xlib_libXres, xlib_libXScrnSaver, xlib_libXt, xlib_libXv, |
| xlib_libXvMC, xlib_libXxf86dga, xlib_libXxf86vm, xmlstarlet, |
| xproto_xcmiscproto, xproto_xextproto, xscreensaver, |
| xserver_xorg-server, xterm, xz, zeromq, zlib, zlog, zmqpp, |
| znc, zsh, zxing |
| |
| New packages: adwaita-icon-theme, am335x-pru-package, |
| bcache-tools, biosdevname, botan, canfestival, clamav, |
| cppunit, dos2unix, dovecot, dovecot-pigeonhole, getent, glm, |
| gst1-validate, hicolor-icon-theme, ipmitool, leafnode2, |
| libdvbcsa, libgtk3, libphidget, libshout, libunistring, |
| libupnpp, mesa3d-demos, modplugtools, mono, monolite, mp4v2, |
| netcat-openbsd, nginx, odhcploc, openvmtools, |
| phidgetwebservice, pps-tools, pure-ftpd, |
| python-configshell-fb, python-rtslib-fb, python-urwid, qlibc, |
| qt5location, shairport-sync, spidev_test, targetcli-fb, |
| tinyalsa, trinity, x264, yaml-cpp, ympd |
| |
| Removed packages: libelf |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #261: New package: wxWidgets |
| #325: New package: ratpoison |
| #405: New package: OpenVZ tools |
| #1309: New package: rdiff-backup |
| #3427: New package: nginx |
| #3655: New package: libav |
| #3991: New Package: open-vm-tools (Vmware Tools) |
| #6878: dmraid: disabled on ARC |
| #6950: Full unicode support in ncurses |
| #7010: jamvm builds and runs fine under mips (be) |
| #7088: elfutils on Blackfin doesn't build |
| #7142: ecryptfs needs getent to run |
| #7280: CMake toolchain file uses the FORCE attribute on CMAKE_CXX_FLAGS |
| #7346: [2014.08rc3] vim-8ae50e3ef8bf.tar.gz can not be downloaded, ... |
| #7352: [2014.08-rc3] diffutils-3.3 failed on building |
| #7358: rpi-userland: linking with bcm_host doesn't give vc_dispmanx_* |
| #7364: monit builds a static application, even though BR2_PREFER_... |
| #7370: ngrep - requires --with-pcap-includes fully defined to find... |
| #7442: rootfs remount does not work as expected with sysvinit |
| #7448: Having export MACHINE="something" breaks glibc build on IMX6... |
| #7568: musl buildroot-toolchain does not put libgcc_s.so.1 into place |
| #7574: quota-4.01 fails to build statically |
| |
| 2014.08, Released September 1st, 2014 |
| |
| Minor manual fixes/additions. |
| |
| Updated/fixed packages: btrfs-progs, cmake, cppcms, exim, |
| lftp, libdaemon, libev, libgpgme, libiqrf, libnl, libplist, |
| libroxml, libwebsockets, mesa3d, mpd, mtdev2tuio, musepack, |
| perl-gd, php-geoip, php-gnupg, php-imagick, php-memcached, |
| php-ssh2, php-yaml, php-zmq, polarssl, ruby, systemd, taglib, |
| uboot-tools, upmpdcli, webkit, xapp_xfs, xapp_luit, |
| xscreensaver, yajl |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #7346: vim-8ae50e3ef8bf.tar.gz can not be downloaded, 404 not found |
| |
| 2014.08-rc3, Released August 26th, 2014 |
| |
| Minor fixes. |
| |
| User manual update / restructuring. |
| |
| Updated/fixed packages: cairo, ecryptfs-utils, gettext, |
| gstreamer, gstreamer1, gutenprint, icu, imagemagick, jack2, |
| lbreakout2, libevas-generic-loaders, libftdi, libinput, |
| libtorrent, ltris, msgpack, ntp, php, procps-ng, pulseaudio, |
| thrift, tvheadend, usb_modeswitch, xmlstarlet, |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #7136: ecryptfs-utils needs gettext to run when glibc/eglibc... |
| #7322: libgomp dependency issue with imagemagick |
| #7328: Git dl of versions in x/y broken |
| |
| 2014.08-rc2, Released August 18th, 2014 |
| |
| Fixes all over the tree. |
| |
| User manual restructured / reworked. |
| |
| Toolchain: Fix for C++ exceptions / pthread_exit() on |
| uClibc/glibc, C++-11 features with uClibc. |
| |
| Updated/fixed packages: bandwidthd, bluez5_utils, empty, |
| espeak, fbv, ffmpeg, gd, gnupg2, gst1-plugin-good, iftop, |
| infozip, libcuefile, libeml, libnftl, localedef, ltrace, |
| matchbox, mpd, network-manager, nftables, ngrep, nut, openssl, |
| oprofile, perl, perl-net-ssleay, postgresql, pppd, procps-ng, |
| qt, subversion, synergy, systemd, tar, tftpd, webkit, |
| xapp_rstart, xbmc, xbmc-pvr-addons |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #7124: Use BR toolchain externally results a non-bootable... |
| #7208: Glibc C++ aplications crash if they use exceptions |
| #7250: Cannot build with -std=c++11 |
| #7262: Generating locale en_US.UTF-8 fails on 64bit fedora.. |
| #7286: systemd 215 doesn't build |
| |
| 2014.08-rc1, Released August 8th, 2014 |
| |
| Fixes all over the tree and new features. |
| |
| Architecture: Powerpc64 BE/LE added, AVR32 deprecated. |
| Improved altivec / SPE /atomic instructions |
| handling. Additional PowerPC CPU variants added. |
| |
| Defconfigs: Atmel SAMA5D3, Congatec QMX6, Lego ev3, TS-5x00, |
| qemu-system-xtensa, qemu-aarch64-virt added. A number of |
| tweaks to existing ones. lpc32xx defconfigs removed. |
| |
| Toolchain: Microblaze support for internal musl toolchain. |
| Default to GCC 4.8 for internal toolchain, remove deprecated |
| 4.3 and 4.6 versions. |
| External CodeSourcery / Linaro toolchain updates, option to |
| copy gconv libraries for external toolchains. |
| |
| Infrastructure: graph-depends: misc fixes, transitive |
| dependencies are not drawn by default. Download handling is |
| now done using helper scripts. Integrity of downloads can now |
| be verified using sha* hashes. Subversion download now uses |
| peg revisions for robustness. |
| Legal-info: License info of local or overridden packages are |
| saved as well. Toolchain packages are also taken into account. |
| autotools: Static linking with libtool / v1.5 improvements. |
| Gettextize support, similar to autoreconf. |
| kconfig package infrastructure added. |
| |
| Misc: Version selection for busybox dropped. |
| |
| Updated/fixed packages: aespipe, aiccu, alsa-lib, alsa-utils, |
| alsamixergui, argus, armadillo, at, atftp, atk, avahi, |
| avrdude, axel, b43-firmware, b43-fwcutter, bandwidthd, bc, |
| bcusdk, beecrypt, bind, binutils, blackbox, bluez5_utils, |
| bmon, boa, bonnie, bootutils, bsdiff, btrfs-progs, bustle, |
| busybox, bwm-ng, bzip2, ca-certificates, cairo, can-utils, |
| ccache, ccrypt, chrony, cifs-utils, classpath, cloog, cmake, |
| collectd, connman, coreutils, cosmo, cppcms, cramfs, crda, |
| cryptodev-linux, cryptodev, ctorrent, cvs, dbus-cpp, |
| dbus-glib, dbus-python, dbus, dcron, dejavu, devmem2, |
| dfu-util, dhcp, dhcpcd, dhcpdump, dhrystone, dialog, dillo, |
| distcc, dmidecode, dmraid, dnsmasq, doom-wad, dropbear, |
| dropwatch, dsp-tools, dtv-scan-tables, dvb-apps, e2fsprogs, |
| e2tools, eeprog, eigen, elf2flt, elftosb, enlightenment, |
| enscript, espeak, ethtool, eudev, evemu, exim, expedite, |
| explorercanvas, ezxml, faifa, fan-ctrl, fconfig, feh, |
| fetchmail, ffmpeg, fftw, file, fio, fis, flann, flashrom, |
| flex, flot, fltk, fontconfig, freerdp, freescale-imx, |
| freetype, ftop, gcc, gd, gdb, genimage, genromfs, gettext, |
| giblib, glib-networking, glibc, gmp, gnupg, gnutls, gpm, gpsd, |
| gptfdisk, gpu-viv-bin-imx6q, gqview, grantlee, gst-ffmpeg, |
| gst-fsl-plugins, gst1-libav, gst1-plugins-bad, |
| gst1-plugins-ugly, gtk2-engines, gtk2-theme-hicolor, gtkperf, |
| gvfs, haserl, hdparm, hostapd, httping, i2c-tools, icu, |
| imagemagick, imx-lib, inadyn, inotify-tools, input-tools, |
| ipkg, iproute2, iputils, irda-utils, iw, jack2, jpeg, jquery, |
| jquery-keyboard, jquery-mobile, jquery-validation, jsmin, kbd, |
| kexec, kmod, knock, latencytop, lcdapi, leafpad, lesstif, |
| lftp, libaio, libarchive, libargtable2, libart, libatasmart, |
| libatomic_ops, libbsd, libcap-ng, libcec, libcgicc, libcgroup, |
| libconfuse, libcurl, libdrm, libdvdnav, libdvdread, |
| libeXosip2, libedit, liberation, libesmtp, libev, libevas, |
| libevdev, libevent, libfcgi, libffi, libfreefare, libfslcodec, |
| libfslparser, libfslvpuwrap, libgail, libgcrypt, libglade, |
| libglib2, libgpgme, libgtk2, libhid, libical, libiconv, |
| libiqrf, libjpeg, liblog4c-localtime, libmbus, libmicrohttpd, |
| libmms, libndp, libnftnl, libnl, libnspr, libnss, liboauth, |
| libpcap, libpng, libpthsem, libqmi, libraw, libraw1394, |
| librsvg, libsoc, libsoup, libsvgtiny, libsysfs, libtasn1, |
| libtirpc, libtorrent, libusb, libv4l, libwebsockets, libxcb, |
| libxml2, libyaml, links, linux-firmware, linux-fusion, |
| linux-headers, linux-pam, lite, live555, lm-sensors, |
| lockfile-progs, lpc3250loader, lshw, lsof, lsuio, ltrace, |
| ltris, lua-messagepack, luainterpreter, luajit, luaposix, |
| luarocks, lvm2, lxc, lz4, lzo, make, makedevs, mdadm, |
| mediastreamer, mesa3d, metacity, minidlna, mkpasswd, |
| modem-manager, mongoose, mpd, mpg123, msgpack, mtd, mtools, |
| mtr, musepack, musl, mysql, nano, nasm, nbd, ncurses, ndisc6, |
| netatalk, netplug, network-manager, nftables, ngircd, nodejs, |
| nss-mdns, ntp, nut, olsr, open2300, opencv, openntpd, openocd, |
| openpgm, openpowerlink, openssh, openssl, openswan, openvpn, |
| opkg, oprofile, opus-tools, orc, p910nd, pango, parted, |
| pax-utils, pcmanfm, perf, perl, perl-module-build, php, |
| pixman, pkgconf, poco, polarssl, popt, portmap, postgresql, |
| prboom, protobuf-c, proxychains-ng, psmisc, psplash, ptpd2, |
| python, |
| python-{bottle,dpkt,id3,mad,msgpack,nfc,pygame,pyzmq,simplejson}, |
| python3, qhull, qt, qt5base, qt5connectivity, qt5declarative, |
| qt5graphicaleffects, qt5multimedia, qt5quickcontrols, |
| qt5sensors, qt5svg, qt5webkit, quagga, quota, radvd, rdesktop, |
| read-edid, rpcbind, rpi-firmware, rpi-userland, rpm, |
| rsh-redone, rsync, rt-tests, rtmpdump, rtorrent, rubix, ruby, |
| samba, samba4, sane-backends, sawman, sconeserver, setserial, |
| sg3_utils, shared-mime-info, smartmontools, smcroute, snappy, |
| socketcand, spawn-fcgi, sqlite, squashfs, squid, sredird, |
| startup-notification, statserial, strongswan, stunnel, |
| sunxi-mali, supervisor, synergy, sysklogd, sysprof, sysstat, |
| systemd, tcpdump, tcpreplay, texinfo, thrift, thttpd, ti-gfx, |
| ti-utils, tinyhttpd, torsmo, trace-cmd, transmission, tslib, |
| tstools, tvheadend, tzdata, uboot-tools, uclibc, udev, |
| udpcast, usb_modeswitch, usbmount, util-linux, valgrind, vim, |
| vlc, w_scan, wayland, webrtc-audio-processing, weston, wget, |
| wireless-regdb, wireless_tools, wireshark, wpa_supplicant, |
| xapp_{twm,xconsole,xcursorgen,xedit,xfs,xinit,xrandr}, |
| xdriver_xf86-video-intel, xlib_lib{FS,ICE,Xext,Xfont,Xft,Xi}, |
| xproto_fontsproto, xproto_inputproto, xserver_xorg-server, |
| x11vnc, xbmc, xbmc-addon-xvdr, xbmc-pvr-addons, xterm, xvkbd, |
| xz |
| |
| New packages: flickcurl, fmc, fmlib, geoip, gnupg2, |
| google-breakpad, imx-vpu, isl, kexec-lite, libglew, libglu, |
| libinput, libksba, libmemcached, libmpdclient, librtlsdr, |
| libuv, libva, libva-intel-driver, linux-zigbee, memcached, |
| mpdecimal, ncmpc, opencore-amr, patchelf, perl-datetime-tiny, |
| perl-gd, perl-gdgraph, perl-gdtextutil, perl-io-socket-ssl, |
| perl-json-tiny, perl-mojolicious, perl-net-ssleay, |
| perl-path-tiny, perl-try-tiny, perl-xml-libxml, |
| perl-xml-namespacesupport, perl-xml-sax, perl-xml-sax-base, |
| php-geoip, php-memcached, pifmrds, pinentry, powerpc-utils, |
| procps-ng, pwgen, python-cffi, python-daemon, python-flup, |
| python-ipython, python-numpy, qt5enginio, qt5webkit-examples, |
| qt5websockets, simicsfs, sispmctl, sox, sshpass, tclap, |
| twolame, upmpdcli, whois, xlib_libxshmfence, xproto_dri3proto |
| |
| Removed packages: procps |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #5750: Doing a Buildroot build from /usr doesn't work |
| #5900: config flags to the Xenomai build system |
| #6230: Cannot compile gcc without threads (uClibc-based) |
| #6626: procps Unknown HZ value! (XX) Assume 100 |
| #7118: Package "thrift" requires atomic operations |
| #7154: Local uClibc config file gets overwritten using ... |
| #7160: host-xz not built |
| #7166: hostapd: segfault when using RT5370 |
| #7172: Name collision of rpath token expansion and internal.. |
| #7178: NTPd package cannot sync time without a proper ntp.conf |
| #7184: supervisord depends on libxml2 implicitly |
| #7196: Unable to build on UBUNTU13.10 |
| #7268: python 2.7 compilation issue on a Debian/Ubuntu ... |
| |
| 2014.05, Released May 31st, 2014 |
| |
| Minor fixes. |
| |
| Minor manual fixes. U-Boot now defaults to spl/u-boot-spl.bin |
| for the spl file. |
| |
| Updated/fixed packages: exim, glibc, gnutls, libfribidi, |
| qt5base, qt5webkit, sysklogd, thrift, u-boot |
| |
| 2014.05-rc3, Released May 28th, 2014 |
| |
| Minor fixes. |
| |
| Updated/fixed packages: acl, attr, connman, dosfstools, |
| dropbear, dvb-apps, exim, flite, gdb, httping, hwdata, |
| lesstif, libnss, libv4l, lttng-babeltrace, midori, monit, |
| mplayer, php, python2, rdesktop, rpi-userland, ruby, samba, |
| samba4, slang, xbmc |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #7100: license info for package 'acl' missing |
| #7106: license info for package 'attr' missing |
| #7112: license info for package 'hwdata' |
| |
| 2014.05-rc2, Released May 21st, 2014 |
| |
| Fixes all over the tree. |
| |
| Stripping using sstrip has been deprecated. |
| |
| BR2_EXTERNAL can now also be used to implement custom |
| filesystem types. |
| |
| The newly added BR2_GRAPH_DEPTH variable to limit the depth of |
| the generated dependency graph has been renamed to |
| BR2_GRAPH_DEPS_OPTS, so additional options can be supported in |
| the future. |
| |
| The virtual package infrastructure will now error out early |
| if multiple packages providing the same virtual package has |
| been enabled (E.G. opengl). This change requires that the |
| packages explicitly declare what virtual package(s) they |
| provide. |
| |
| Updated/fixed packages: acpid, armadillo, avahi, bellagio, |
| btrfs-progs, cairo, clapack, directfb, duma, ecryptfs-utils, |
| elfutils, eudev, fbgrab, fio, flann, fluxbox, gdb, gpm, |
| gpu-viv-bin-mx6q, gst1-plugins-good, gst-plugins-good, |
| imagemagick, iprutils, ipsec-tools, jack2, libdvdnav, |
| libdvdread, libnss, libunwind, linux-headers, lsof, lua, |
| luajit, matchbox-keyboard, mesa3d, mpd, mplayer, mtr, mysql, |
| netsnmp, nodejs, openpowerlink, openvpn, pciutils, |
| php-imagick, postgresql, pulseaudio, qt5quick1, rpi-userland, |
| rsyslog, samba, samba4, sane-backends, sunxi-mali, systemd, |
| ti-gfx, tstools, udev, webkit, wpa_supplicant, xbmc, |
| xlib_libXpm, xserver_xorg-server, zyre |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #5396: Boot hangs when starting samba if BR2_ENABLE_LOCALE... |
| #7016: Git issues in resulting buildroot tar |
| #7094: pciutils doesn't build on Blackfin |
| |
| 2014.05-rc1, Released May 13th, 2014 |
| |
| Fixes all over the tree and new features. |
| |
| Architectures: Support for MIPS o32 ABI on MIPS-64 targets has |
| been removed. Building o32 ELF files for MIPS64 is an exotic |
| configuration that nobody should be using. If o32 is required, |
| then is better if it's built for MIPS 32-bit cores so only |
| 32-bit instructions will be used leading to a more efficient |
| o32 usage. |
| Support for the ARM A12 variant and Intel corei7. |
| |
| Configs: Minnowboard and Altera SoCkit added, QEMU updates. |
| |
| Bootloaders: Grub2 and gummiboot support, syslinux support |
| extended. |
| |
| Toolchains: GCC 4.9. Glibc 2.19. Support for the musl C |
| library for internal and external toolchains. 4.8-R3 support |
| for ARC, Internal toolchain support for Aarch64 and |
| Microblaze. Environment variable to control debug output of |
| toolchain wrapper renamed to BR2_DEBUG_WRAPPER to match the |
| other variables. Toolchain tuple vendor name can now be |
| customized. Updated external Linaro ARM/Aarch64 |
| toolchains. Added external Linaro ARMEB toolchain. |
| A GDB gdbinit file is now generated for external toolchains to |
| automatically set the correct sysroot. |
| |
| Kconfig handling for minimum kernel headers version required |
| for packages. Now packages needing specific kernel header |
| features can specify these requirements in Kconfig. |
| |
| Infrastructure: Support for (but disabled as it leads to |
| unreproducible builds) toplevel parallel builds. See the |
| comment at the top of Makefile for details about how to enable |
| it and what the problems are if you want to test it. |
| Python package infrastructure extended to support Python 3.x |
| Perl and virtual package infrastructure support added. |
| PRE_*_HOOKS support for all build steps. |
| |
| Updated/fixed packages: acpid, agentpp, aiccu, apr, avahi, |
| barebox, bash, beecrypt, bellagio, binutils, boost, |
| boot-wrapper-aarch64, bustle, busybox, ca-certificates, cairo, |
| ccache, ccid, cgilua, chrony, cifs-utils, civetweb, cmake, |
| collectd, connman, coreutils, coxpcall, cppcms, cppzmq, crda, |
| cryptodev, cryptsetup, cups, czmq, dbus, dhcpdump, directfb, |
| dmalloc, dmraid, dnsmasq, dosfstools, dsp-tools, dtc, |
| dvb-apps, ebtables, ecryptfs-utils, eigen, erlang, ethtool, |
| evemu, evtest, f2fs-tools, fdk-aac, feh, ffmpeg, file, filemq, |
| flac, flot, fmtools, fping, freetype, fswebcam, gcc, gd, gdb, |
| gettext, giblib, git, glibc, glibmm, glib-networking, gmp, |
| gnutls, gpm, gpsd, gpu-viv-bin-mx6q, grep, gst1-libav, |
| gst1-plugins-bad, gst1-plugins-base, gst1-plugins-good, |
| gst1-plugins-ugly, gst-ffmpeg, gst-fsl-plugins, gst-omx, |
| gst-plugins-good, gstreamer1, gvfs, harfbuzz, haveged, |
| hostapd, htop, httping, ifplugd, iftop, igmpproxy, |
| imagemagick, imlib2, imx-lib, infozip, intltool, iproute2, |
| ipsec-tools, ipset, jansson, jpeg, jpeg-turbo, jquery, |
| jquery-keyboard, jquery-ui, jquery-ui-themes, json-glib, |
| json-javascript, kexec, kmod, lame, lbase64, lbreakout2, |
| lcdproc, lftp, libao, libatasmart, libatomic_ops, libcap, |
| libcdio, libcec, libcgicc, libcgroup, libcurl, libdrm, |
| libdvdnav, libdvdread, libegl, libeio, libenca, libesmtp, |
| libevas, libevdev, libfribidi, libfslcodec, libfslparser, |
| libfslvpuwrap, libgail, libgles, libglib2, libgtk2, libhid, |
| libjpeg, libmbim, libmicrohttpd, libmodplug, libnftnl, |
| libnspr, libogg, libopenmax, libopenvg, libpcap, libplayer, |
| libpng, libpthread-stubs, librsvg, libsigsegv, libsocketcan, |
| libsoup, libtasn1, libtool, libtpl, libunwind, liburcu, |
| libusb, libwebsockets, libxcb, libxml2, libxmlpp, libyaml, |
| lighttpd, linphone, linux-firmware, linux-headers, ljsyscall, |
| lmbench, lsof, ltp-testsuite, ltris, lttng-babeltrace, |
| lttng-libust, lttng-modules, lttng-tools, lua, lua-cjson, |
| luacrypto, lua-ev, luaexpat, luaexpatutils, luafilesystem, |
| luainterpreter, luajit, lua-msgpack-native, luaposix, |
| luarocks, luasec, luasocket, luasql-sqlite3, lvm2, macchanger, |
| memstat, mesa3d, metacity, minidlna, mmc-utils, |
| mobile-broadband-provider-info, modem-manager, mongrel2, |
| monit, mpd, mplayer, msmtp, mtd, mtools, mutt, mysql, nasm, |
| ncurses, ne10, netatalk, netsnmp, nettle, network-manager, |
| newt, nfs-utils, nmap, nodejs, ntfs-3g, ntp, nut, ofono, ola, |
| olsr, omniorb, opencv, opengl, openpgm, openssh, openssl, |
| openswan, openvpn, orbit, orc, p11-kit, pango, parted, |
| pciutils, pcre, pcsc-lite, perf, perl, perl-xml-parser, php, |
| picocom, pixman, pkgconf, poppler, popt, portmap, powervr, |
| pppd, pptp-linux, proftpd, protobuf, protobuf-c, ptpd2, |
| pulseaudio, python, python3, python-bottle, python-m2crypto, |
| python-netifaces, python-pyasn, python-pycrypto, |
| python-pygame, python-pysnmp, python-pysnmp-apps, |
| python-pysnmp-mibs, python-serial, python-setuptools, |
| qextserialport, qt, qt5, qt5base, qt5connectivity, |
| qt5declarative, qt5graphicaleffects, qt5imageformats, |
| qt5multimedia, qt5quick1, qt5quickcontrols, qt5script, |
| qt5sensors, qt5serialport, qt5svg, qt5webkit, qt5x11extras, |
| qt5xmlpatterns, qtuio, qwt, radvd, readline, rings, |
| rpi-firmware, rpi-userland, rsh-redone, rsync, rsyslog, rtai, |
| rtmpdump, rt-tests, ruby, samba, sconeserver, scons, sdl, |
| sdl_image, sdl_mixer, sg3_utils, slang, smstools3, snmppp, |
| socat, speex, sqlcipher, sqlite, squashfs, squid, strongswan, |
| stunnel, sunxi-boards, sunxi-mali, sunxi-tools, sylpheed, |
| syslinux, sysstat, systemd, taglib, tcl, tcllib, tcpreplay, |
| tidsp-binaries, ti-gfx, tmux, tvheadend, tzdata, uboot, |
| uboot-tools, uclibc, udev, udisks, ulogd, usb_modeswitch, |
| usb_modeswitch_data, usbmount, util-linux, valgrind, vlc, |
| webkit, weston, wget, wireshark, wpa_supplicant, wsapi, |
| w_scan, xapp_appres, xapp_bdftopcf, xapp_beforelight, |
| xapp_bitmap, xapp_editres, xapp_fslsfonts, xapp_fstobdf, |
| xapp_iceauth, xapp_ico, xapp_mkfontscale, xapp_rgb, |
| xapp_rstart, xapp_sessreg, xapp_showfont, xapp_twm, |
| xapp_viewres, xapp_xauth, xapp_xbacklight, xapp_xcalc, |
| xapp_xclock, xapp_xditview, xapp_xdpyinfo, xapp_xdriinfo, |
| xapp_xev, xapp_xfd, xapp_xfontsel, xapp_xfs, xapp_xfsinfo, |
| xapp_xgc, xapp_xhost, xapp_xinit, xapp_xkbutils, xapp_xkill, |
| xapp_xload, xapp_xlsclients, xapp_xlsfonts, xapp_xmag, |
| xapp_xman, xapp_xmessage, xapp_xmodmap, xapp_xprop, |
| xapp_xrandr, xapp_xrdb, xapp_xrefresh, xapp_xset, |
| xapp_xsetroot, xapp_xsm, xapp_xstdcmap, xapp_xvidtune, |
| xapp_xvinfo, xapp_xwd, xapp_xwininfo, xcb-util-wm, |
| xdriver_xf86-input-evdev, xdriver_xf86-input-joystick, |
| xdriver_xf86-input-keyboard, xdriver_xf86-input-mouse, |
| xdriver_xf86-input-synaptics, xdriver_xf86-input-vmmouse, |
| xdriver_xf86-video-ark, xdriver_xf86-video-ast, |
| xdriver_xf86-video-ati, xdriver_xf86-video-cirrus, |
| xdriver_xf86-video-dummy, xdriver_xf86-video-fbdev, |
| xdriver_xf86-video-geode, xdriver_xf86-video-glide, |
| xdriver_xf86-video-glint, xdriver_xf86-video-i128, |
| xdriver_xf86-video-intel, xdriver_xf86-video-mach64, |
| xdriver_xf86-video-mga, xdriver_xf86-video-neomagic, |
| xdriver_xf86-video-newport, xdriver_xf86-video-nv, |
| xdriver_xf86-video-openchrome, xdriver_xf86-video-r128, |
| xdriver_xf86-video-savage, xdriver_xf86-video-siliconmotion, |
| xdriver_xf86-video-sis, xdriver_xf86-video-tdfx, |
| xdriver_xf86-video-tga, xdriver_xf86-video-trident, |
| xdriver_xf86-video-vesa, xdriver_xf86-video-vmware, |
| xdriver_xf86-video-voodoo, xenomai, xerces, xl2tp, xlib_libFS, |
| xlib_xtrans, xproto_xproto, xserver_xorg-server, |
| xutil_util-macros, zeromq, zic, zmqpp, zyre |
| |
| New packages: armadillo, btrfs-progs, clapack, cosmo, dado, |
| dbus-triggerd, dtv-scan-tables, e2tools, eudev, exim, expect, |
| fetchmail, flann, flite, gnu-efi, grub2, gummiboot, heimdal, |
| iprutils, iptraf-ng, jack2, jquery-mobile, libee, libestr, |
| libgc, libgl, liblogging, libndp, libsoxr, libstrophe, |
| libubox, libuci, libxmlrpc, ljlinenoise, lpeg, lpty, lrandom, |
| lsqlite3, lua-coat, lua-coatpersistent, lua-csnappy, luajson, |
| lualogging, lua-messagepack, lua-testmore, lunit, lzip, lzlib, |
| musl, nftables, opentyrian, opentyrian-data, |
| perl-module-build, php-gnupg, php-imagick, php-ssh2, php-yaml, |
| php-zmq, postgresql, python-libconfig, python-pypcap, |
| python-pyrex, qdecoder, qhull, samba4, smack, tz, tzdump, ucl, |
| upx, vo-aacenc, xbmc, xbmc-addon-xvdr, xbmc-pvr-addons, |
| yaffs2utils, zlog, znc |
| |
| Removed packages: crosstool-ng, python-distutilscross, vala |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #6842: Checking external toolchain for eabihf |
| #6956: Packaging libsoxr |
| #6986: Make legal-info fails on uboot versions before 2014.01 |
| #6992: Incorrect installation rights on external kernel module.. |
| |
| 2014.02, Released February 27th, 2014 |
| |
| Minor fixes. |
| |
| Updated/fixed packages: cegui06, cppdb, e2fsprogs, gcc, gdb, |
| gst1-plugins-bad, gstreamer, gstreamer1, haserl, imagemagick, |
| libpng, libxml2, lua, luajit, luarock, ncftp, openswan, |
| pcsc-lite, qt5connectivity, ramsmp, strongswan, vlc |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #6938: mkuser script generates wrong password for new user in.. |
| |
| 2014.02-rc3, Released February 25th, 2014 |
| |
| Minor fixes. |
| |
| Updated/fixed packages: aiccu, ala-lib, alsa-utils, binutils, |
| cairo, coreutils, dhcpcd, distcc, efl, evas, iputils, gdb, |
| gpsd, gst-fsl-plugins, icu, libcec, libcgi, libplayer, |
| libsecret, libsepol, libsigsegv, libtool, libv4l, |
| linux-headers, matchbox-lib, mpg123, ncftp, opencv, pcmanfm, |
| pixman, pv, qt, rt-tests, sawman, sconeserver, sdl, thrift, |
| tvheadend, util-linux, webkit, xscreensaver |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #4706: Removing .stamp_target_installed does not trigger... |
| #5030: busybox built fails if we use an override src dir... |
| #5420: Dbus and /var/run management |
| #5768: Not able to build ALSA-Lib for static build |
| #5774: Not able to build ALSA-Utils for static build |
| #6542: external python modules fail to compile to pyc if... |
| #6764: Support for kernel signed modules |
| #6794: Busybox compiled from buildroot hangs on pass from... |
| |
| 2014.02-rc2, Released February 20th, 2014 |
| |
| Fixes all over the tree. Static linking / nommu fixes and |
| annotations for several packages. |
| |
| Updated/fixed packages: boost, busybox, collectd, coreutils, |
| dropbear, elfutils, feh, gcc, gst1-libav, imagemagick, iozone, |
| jimtcl, kexec, libvncserver, lvm2, lxc, mplayer, netsnmp, nut, |
| opencv, python, python3, qtuio, systemd, thrift, transmission, |
| uclibc, vlc, webkit |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #5450: AT91SAM9260 Bootstrap compilation problem |
| #5582: libiconv 1.14 failed to build |
| #5624: When building directfb, BR2_TARGET_LDFLAGS not used by.. |
| #5852: [2012.11] usb_modeswitch should depends of "BR2_PACK.. |
| #6218: binutils-2.23.2/gas fails with undefined reference to.. |
| #6236: binutils-2.23.2/bfd fails with undefined reference to.. |
| #6470: If the build directory is a child of /usr, the build.. |
| #6776: systemd error: static declaration of 'execvpe' follows.. |
| #6818: toolchainfile.cmake has absolut path references |
| |
| 2014.02-rc1, Released February 11th, 2014 |
| |
| Fixes all over the tree and new features. |
| |
| Support for external packages/defconfigs (BR2_EXTERNAL). See |
| user manual for details. |
| |
| Cleanup of environment variable names for consistency. The |
| download directory location override (BUILDROOT_DL_DIR) is now |
| called BR2_DL_DIR. Likewise the name of the current .config is |
| renamed from BUILDROOT_CONFIG to BR2_CONFIG. Please update |
| your post build scripts if you use this! BUILD_DIR is now also |
| exported to the post build/image scripts. |
| |
| Toolchain: GCC 4.8 fix for ARM stack corruption, reverted |
| uClibc pread/pwrite backport as they cause issues on certain |
| architectures, new Linaro and Sourcery Codebench toolchains. |
| x86: Support for AMD Jaguar cores, SSE4.x, SH: SH2/SH3/SH3EB |
| variants removed, Microblaze: Internal toolchain support |
| |
| Legal infrastructure: Info is now split between host and |
| target packages, large number of license annotations. |
| |
| Lua: selection between lua 5.1 / 5.2, luarocks support |
| |
| Python: package infrastructure, many new packages. |
| |
| Defconfigs: Armadeus APF51 + Zedboard added, apf27, apf28, |
| beaglebone, microblaze, pandaboard, qemu, raspberry pi |
| updated. |
| |
| Updated/fixed packages: aiccu, alsa-lib, alsa-utils, |
| am33x-cm3, aumix, autoconf, automake, barebox, bellagio, |
| berkeleydb, binutils, bison, blackbox, bluez_utils, boost, |
| bustle, busybox, cairo, can-utils, ccache, ccid, cgilua, |
| cifs-utils, civetweb, cmake, collectd, connman, copas, |
| coreutils, coxpcall, cppzmq, cramfs, crda, cryptodev-linux, |
| cryptsetup, cups, czmq, dhcpcd, dhcpdump, dhrystone, dialog, |
| dmraid, dnsmasq, dosfstools, dropbear, dropwatch, dtc, duma, |
| dvb-apps, e2fsprogs, eglibc, eigen, elf2flt, erlang, ethtool, |
| f2fs-tools, ffmpeg, file, filemq, fio, flashrom, flex, |
| fluxbox, fontconfig freerdp, freetype, gadgetfs-test, gawk, |
| gcc, gdb, gdbm, gettext, git, glibc, gnupg, gnutls, gob2, |
| gpsd, grep, grub, gst-ffmpeg, gst-plugins-good, |
| gst1-plugins-bad, gst1-plugins-base, gst1-plugins-good, |
| gst1-plugins-ugly, gstreamer, gstreamer1, gtest, icu, iftop, |
| imagemagick, inadyn, infozip, iozone, iproute2, iptables, iw, |
| jpeg, jpeg-turbo, jq, kexec, kmod, knock, lbase64, lcdapi, |
| lftp, libcdaudio, libcgi, libcgicc, libcuefile, libcurl, |
| libdmtx, libdrm, libdvdnav, libdvdread, libegl, libevent, |
| libexif, libfcgi, libfreefare, libgles, libglib2, libllcp, |
| libmicrohttpd, libmpd, libnfc, libnl, libnss, libopenmax, |
| libopenvg, libpcap, libpfm4, libplayer, libpng, libqmi, |
| libreplaygain, libroxml, libsamplerate, libsexy, libsigsegv, |
| libsndfile, libsoc, libtasn1, libtorrent, libtpl, libupnp, |
| libusb, libusb-compat, libvorbis, libxcb, libxml2, libxmlpp, |
| libyaml, lighttpd, linknx, linux-firmware, linux-pam, live555, |
| lm_sensors, lmbench, lockdev, logrotate, lrzsz, ltrace, lua, |
| lua-ev, lua-msgpack-native, luabitop, luaexpat, luaexpatutils, |
| luafilesystem, luajit, luaposix, luasec, luasocket, |
| luasql-sqlite3, m4, matchbox, mdadm, minicom, mongrel2, mpc, |
| mpd, mpg123, mplayer, mtd, mysql, lvm2, mxml, ncurses, ne10, |
| neard, neardal, netsnmp, netstat-nat, network-manager, nodejs, |
| numactl, ofone, ola, olsr, omniorb, open2300, opencv, |
| openpowerlink, openssh, openssl, openvpn, oprofile, opus, |
| opus-tools, orbit, p11-kit, parted, pcre, pcsc-lite, perl, |
| php, poco, poppler, powervr, protobuf-c, psplash, python, |
| python-bottle, |
| python-{crc16,distutilscross,dpkt,id3,ipy,m2crypto,mad,meld}, |
| python-{netifaces,nfc,protobuf,pygame,pyparsing,pyro,pyzmq}, |
| python-{serial,setuptools}, qt, qt5base, qt5connectivity, |
| qt5declarative, qt5graphicaleffects, qt5jsbackend, |
| qt5multimedia, qt5quick1, qt5quickcontrols, qt5script, |
| qt5webkit, radvd, redis, rings, rng-tools, rpcbind, |
| rpi-firmware, rpi-userland, rt-tests, sam-ba, samba, sawman, |
| sconeserver, scons, sdl, sg3_utils, snappy, snmppp, |
| socketcand, spice, spice-protocol, sqlcipher, sqlite, squid, |
| sshfs, strace, subversion, sunxi-mali, supervisor, sysklogd, |
| sysprof, sysstat, systemd, sysvinit, taglib, tar, tcpdump, |
| ti-gfx, ti-utils, tinymembench, tn5250, trace-cmd, |
| transmission, tvheadend, tzdata, zxing, uboot, uboot-tools, |
| uclibc, udev, udpcast, ulogd, urg, usb_modeswitch_data, |
| util-linux, vala, valgrind, vorbis-tools, wavpack, wayland, |
| weston, wget, wireless-regdb, wireshark, wpa_supplicant, |
| wsapi, xavante, xapp_xdpyinfo, xapp_xrandr, xcb-proto, |
| xdriver_xf86-video-intel, xenomai, xkeyboard-config, xl2tp, |
| xlib_lib{FS,SM,X11}, |
| xlib_libX{au,aw,composite,cursor,damage,ext,fixes,font,i}, |
| xlib_libX{inerama,mu,pm,randr,render,res,t,tst,v,xf86dga}, |
| xlib_libXxf86vm, xlib_libdmx, xlib_libfontenc, |
| xlib_libpciaccess, xlib_xtrans, xproto_dri2proto, |
| xproto_{glproto,inputproto,presentproto,randrproto,videoproto}, |
| xproto_xextproto, xproto_xproto, xutil_util-macros, |
| xutil_makedepend, zic, zmqpp, zxing, zsh, zyre |
| |
| New packages: apitrace, avrdude, c-ares, ca-certificates, |
| cwiid, dbus-cpp, evemu, fping, fswebcam, gpm, gst1-libav, |
| haveged, intel-microcode, iucode-tools, jasper, joe, ktap, |
| lbreakout2, libass, libbluray, libcdio, libenca, libevdev, |
| libmbim, libmodplug, libnfs, libnftnl, libplist, libshairplay, |
| libsocketcan, ljsyscall, log4cplus, ltris, luainterpreter, |
| luarocks, minidlna, mmc-utils, modemmanager, mtr, net-tools, |
| python-configobj, python-dialog, python-json-schema-validator, |
| python-keyring, python-msgpack, python-posix-ipc, |
| python-pyasn, python-pycrypto, python-pysnmp, |
| python-pysnmp-apps, python-pysnmp-mibs, python-pyusb, |
| python-simplejson, python-tornado, python-versiontools, |
| rtmpdump, rtptools, smcroute, smstools3, tcpreplay, thrift, |
| ti-uim, tinyxml, tmux, vlc, wmctrl, xconsole |
| |
| Removed packages: autoconf, automake, ccache, cpanminus, lzma, |
| netkitbase, netkittelnet, pkg-config, squashfs3, ttcp, xstroke |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #65: new package: dbus c++ language bindings |
| #769: Update configuration menu for MIPS target |
| #2419: Add a bundle of Lua modules |
| #2629: Segmentation faults and division by zero in Grub on ext2 |
| #3811: Added auto-mount for USB and SD Card (mdev) (for 2011.05) |
| #4339: Allow override of DL_DIR in extract step |
| #4363: Make sure that copied linux and busybox defconfig are... |
| #4454: There should be simple way to update image, when chang... |
| #5024: grub fails to build for x86_64 target architecture |
| #5066: New-Package: net-tools |
| #5072: ncurses: add ncurses-progs to target |
| #5294: uclibc build ignores target CFLAGS and LDFLAGS |
| #5366: Login doesn't work with util-linux versions of login/agetty |
| #5378: dropbear Makefile broken |
| #5390: System banner - change to empty doesn't remove /etc/issue |
| #5780: spurious build failure because it cannot remove ubinize.cfg |
| #5798: ncurses-5.9 fails to compile statically |
| #5810: Buildroot 2012.11: Additional GCC option "-msoft-float" ... |
| #6080: Git fetch caching |
| #6092: Bootable ISO image creation seems to have stopped working.. |
| #6272: coreutils build fails |
| #6434: apply-patches.sh does not work recursively |
| #6446: eglibc doesn't install ldconfig to target |
| #6484: Add c-ares |
| #6596: Slow bootup if mdev is chosen |
| #6656: Build Qt5 with ccache |
| #6662: internal compiler error: Segmentation fault during making.. |
| #6722: Usage of $($(PKG)_DIR_PREFIX) is an issue with linux package |
| #6752: genext2fs: e2fsck must run before tunefs -U random |
| #6770: openssl 1.0.1f fails with ccache |
| #6830: Qt5: no fonts are installed |
| #6848: Qt5: no text shown in simple QWidget / frame-buffer setup |
| #6854: Update to Qt 5.2.1 |
| |
| 2013.11, Released November 30th, 2013: |
| |
| Minor fixes. |
| |
| Updated/fixed packages: apr, binutils, dbus-python, dropwatch, |
| ecryptfs-utils, eglibc, gdb, gpsd, grantlee, hostapd, |
| iptables, qlibiscsi, libnspr, libnss, libpfm4, libtool, |
| lua-ev, lvm2, mplayer, qt, qt5, quagga, ruby, tinymembench, |
| tvheadend, util-linux, wpa_supplicant |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #1279: Buildroot compiled Busybox and Coreutils LFS issues |
| #2995: -fstack-protector-all causes ssh to SIGSEGV |
| #5570: Cannot compile software on the target machine |
| #6428: util-linux libmount segfaults with patch from buildroot |
| #6500: php fails to build for armel |
| #6554: gdb needs to dependents on host texinfo |
| #6692: GNU nano fails to compile for x86_64 |
| #6704: wpa_supplicant: fix wrong path to executable file in D-Bus |
| |
| 2013.11-rc3, Released November 26th, 2013 |
| |
| Fixes all over the tree. |
| |
| Architecture: Mark MIPS I, II, III and IV as deprecated. |
| |
| Updated/fixed packages: beecrypt, dbus, e2fsprogs, libcap-ng, |
| libglib2, libroxml, libsigsegv, libvncserver, lxc, mdadm, |
| mongoose, nut, ola, omniorb, openssl, pcre, php, poco, |
| protobuf-c, pv, qt5base, ruby, schifra, squid, sunxi-mail, |
| swig, ti-gfx, tinymembench, uclibc, udisks, vim |
| |
| 2013.11-rc2, Released November 18th, 2013 |
| |
| Fixes all over the tree. |
| |
| Defconfigs: qemu_arm_versatile, qemu_arm_nuri, sheevaplug: |
| Adjust kernel versions. |
| |
| Toolchain: avr32: fix for modern kernel headers |
| |
| Bootloader: Barebox updated to 2013.10.1 |
| |
| Updated/fixed packages: dhcp, e2fsprogs, gst1-plugins-bad, |
| libcurl, libvncserver, nano, pc, qt5base, squashfs, ttcp, |
| wayland, wvstreams |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #3601: DHCPD S80dhcp-server startup script issues |
| #6320: Fix kernel compile issue if BR2_LINUX_KERNEL_CUSTOM_GIT_VERS.. |
| #6416: Xenomai package, patch alternative |
| #6590: directfb-examples build failed whit linaro toolchain |
| |
| 2013.11-rc1, Released November 12th, 2013 |
| |
| Architectures: Nios-II support, MIPS arch handling fixes |
| |
| Defconfigs: cubieboard2, freescale i.MX 6sololite evk, |
| sabre-sd, wandboard added, rpi renamed to raspberrypi_defconfig |
| |
| Toolchain: glibc support, upstream uClibc fixes, uClibc 0.9.31 |
| for avr32, crosstool-ng backend removed, external musl |
| toolchain support, gcc 4.8.2, updated Linaro external |
| toolchains. Fortran and objective-C support deprecated, |
| mudflap support |
| |
| Bootloaders: U-Boot: u-boot.imx support, version bumps |
| |
| Linux: use kmod instead of module-init-tools |
| |
| System: default to devtmpfs for /dev |
| |
| Infrastructure: Make 3.82 fixes, locales generation fixes, CVS |
| download support, post-rsync hooks |
| |
| Fs: u-boot image support for cpio |
| |
| Updated/fixed packages: aircrack-ng, alsamixergui, apr, |
| apr-util, atk, automake, bellagio, berkeleydb, bind, binutils, |
| bison, boost, busybox, can-utils, ccache, ccid, cgilua, |
| chrony, cifs-utils, cjson, collectd, connman, conntrack-tools, |
| copas, cppcms, cppzmq, czmq, dash, dbus, dhcpcd, diffutils, |
| directfb, dmidecode, dnsmaqs, docker, dosfstools, dropbear, |
| dropwatch, ebtables, eglibc, elf2flt, empty, enchant, erlang, |
| ethtool, fbgrab, fbv, fdk-aac, feh, ffmpeg, file, findutils, |
| fltk, fmtools, freetype, gdk-pixbuf, gettext, git, |
| glib-networking, gmp, gnupg, gnutls, gpu-viv-bin-mx6q, gsl, |
| gstreamer, gstreamer1, gst1-plugins-{bad,base,good,ugly}, |
| gtest, gutenprint, hplip, i2c-tools, icu, ifplugd, |
| imagemagick, iozone, iproute2, ipset, iptables, iw, jamvm, |
| jansson, jpeg-turbo, kismet, kmod, lcms2, libassuan, libcap, |
| libcap-ng, libcdaudio, libcec, libcue, libcurl, libdrm, |
| libedit, libevas, libevent, libfreefare, libfuse, |
| libgpg-error, libiconv, liblog4c-localtime, libmicrohttpd, |
| libmnl, libmodbus, |
| libnetfilter_{acct,conntrack,cthelper,cttimeout,log,queue}, |
| libnfnetlink, libnl, libpng, libqmi, libqrencode, libroxml, |
| libsecret, libsigsegv, libsoup, libtirpc, libunwind, libusb, |
| libvpx, lighttpd, linphone, linux-pam, lmbench, |
| lockfile-progs, log4cxx, logrotate, logsurfer, ltp-testsuite, |
| ltrace, luacrypto, luaposix, lvm2, m4, matchbox-lib, |
| media-ctl, mediastreamer, minicom, minidlna, mongoose, monit, |
| mpc, mpd, mpg123, mplayer, mrouted, mtdev, mutt, mysql_client, |
| nano, ncftp, ndisc6, neard, neardal, neon, net-snmp, netatalk, |
| netcat, netkitbase, netperf, netplug, nettle, nfacct, |
| nfs-utils, ngircd, ngrep, noip, nuttcp, olsr, openssh, opkg, |
| oprofile, opus-tools, orc, ortp, pciutils, pcre, pcsc-lite, |
| perf, perl, perl-cross, php, picocom, pkgconf, polarssl, |
| poppler, pppd, proftpd, protobuf, proxychains-ng, pulseaudio, |
| pv, qemu, qt, qt5base, qt5webkit, quagga, radvd, redis, |
| rpi-{firmware,userland}, rrdtool, rsync, rtorrent, ruby, |
| samba, scons, screen, sdl_sound, ser2net, setserial, |
| smartmontools, socat, socketcand, sqlcipher, sqlite, squid, |
| stress, strongswan, stunnel, sudo, syslinux, systemd, |
| sysvinit, tcl, ti-gfx, time, transmission, tremor, tslib, |
| tstools, tvheadend, tzdata, uboot-tools, uclibc, udpcast, |
| uemacs, ulogd, usb_modeswitch{,_data}, util-linux, vala, |
| valgrind, vde2, vorbus-tools, vpnc, vsftpd, vtun, wayland, |
| webkit, webp, webrtc-audio-processing, weston, wget, |
| wireshark, wsapi, xavante, xdriver_xf86-video-geode, xenomai, |
| xinetd, xlib_libpthread-stubs, xl2tp, xmlstarlet, |
| xserver_xorg-server, xz, zeromq, zic, zmqpp |
| |
| New packages: aiccu, autossh, bc, civetweb, cppdb, cryptsetup, |
| duma, eigen, harfbuzz, igmpproxy, iputils, jq, knock, kobs-ng, |
| lesstif, libcgroup, libsepol, libsoc, libssh2, luasec, luasql, |
| lxc, nut, ola, omniorb, openpowerlink, orbit, p910nd, psplash, |
| python-crc16, python-ipy, python-pyzmq, qt5sensors, |
| qt5serialport, qt5x11extras, snmppp, subversion, tcping, |
| trace-cmd, xscreensaver, zsh |
| |
| Removed packages: module-init-tools |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #1138: Buildroot fails to build packages if BR2_GCC_SHARED_LIBGCC=y |
| #5408: qt build failure with Sourcery CodeBench ARM 2010.09 |
| #5630: makefile error with toolchain helpers.mk |
| #5672: htop: remove X11 stuff |
| #5678: linux.mk: linux-menuconfig fails |
| #5696: python3 installation is too large, patches from python2 needed |
| #5978: Erlang does not build for arm in 2013.02-rc3 |
| #6392: Extended ARM uImage kernel options |
| #6404: Buildroot's coreutils 'uname -p' reports 'Unknown' on recent.. |
| #6428: util-linux libmount segfaults with patch from buildroot |
| #6452: eglibc from Linaro 2013.07 not copied to target correctly |
| #6566: PHP segfault when crosscompiled to mips64 - patch included |
| #6572: [PowerPC] Buildroot uses wrong external toolchain libraries.. |
| #6578: udisks package broken |
| #6602: ebtables 64 bit kernel + 32 bit userland alignment error.. |
| #6608: ebtables missing ethertypes - fix included |
| #6620: Sysvinit package missing killall5 and symlinks - patch included |
| #6632: CMake use host pkg-config |
| #6638: pkgconf doesn't download |
| #6644: "all" target doesn't work in out-of-tree builds |
| #6650: Segmentation fault when trying to build latest buildroot |
| #6668: iptables limit module alignment problem on mips64 |
| |
| 2013.08, Released August 31th, 2013: |
| |
| Minor fixes. |
| |
| Documentation build fixed. |
| |
| Updated/fixed packages: ltrace, strongswan |
| |
| 2013.08-rc3, Released August 29th, 2013: |
| |
| Fixes all over the tree. |
| |
| External toolchain lib32/lib64 handling, ABI name for EABIhf, |
| misc fixes for generatelocales, apply-patches and module |
| stripping. |
| |
| Top level menu names reordered and renamed for clarity. |
| |
| Updated/fixed packages: acl, attr, bash, dbus, directfb, |
| dvb-apps, kexec, kmod, libbsd, linux-fusion, mesa3d, minidlna, |
| openssh, openssl, pulseaudio, python-setuptools, qt5, |
| qt5webkit, redis, strongswan, sunxi-mali |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #6464: dbus-daemon-launch-helper needs setuid |
| |
| 2013.08-rc2, Released August 16th 2013: |
| |
| Documentation improvements. |
| |
| External toolchains fixes. |
| |
| Updated/fixed packages: aircrack-ng, bash, boost, cairo, |
| cppcms, eglibc, ffmpeg, gcc, git, gnupg, imagemagick, libcec, |
| libffi, libgcrypt, linux, linux-headers, ltrace, netatalk, |
| opencv, opengl, readline, samba, strongswan, sunxi-cedarx, |
| uclibc, udev, wayland, webkit, zeromq. |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #6440: typo in ffmpeg makefile |
| |
| 2013.08-rc1, Released August 5th, 2013: |
| |
| Architectures: |
| - improved support for floating point on ARM and Thumb/Thumb2 |
| - support for ARM OABI removed |
| |
| Toolchains: |
| - support added for Sourcery CodeBench ARM and MIPS 2013.05 |
| - Linaro ARM and Aarch64 toolchains updated |
| - support added for the Arago ARMv5 and ARMv7 toolchains |
| - gcc 4.8.x version bumped |
| - support for installing both FDPIC and FLAT libraries on |
| Blackfin |
| - support for uClibc 0.9.31 removed, |
| - convert the internal toolchain backend to use the package |
| infrastructure |
| - support added for eglibc in the internal toolchain backend |
| - toolchain components for the ARC architecture updated and |
| gdb for ARC added. |
| - support for Blackfin in the internal toolchain fixed |
| |
| Defconfigs: beaglebone_defconfig updated, new defconfig for |
| CubieBoard, for Olimex mx233 Olinuxino, for Calao Systems |
| TNY-A9G20-LPW. |
| |
| A number of packages have been fixed to use the |
| <pkg>_CONFIG_SCRIPTS mechanism to get their <pkg>-config shell |
| script installed and modified properly. Licensing informations |
| has been added to a number of packages. |
| |
| Use XZ tarballs for a number of packages. |
| |
| Noticeable package changes/additions: |
| - The glib2/libgtk2/webkit stack has been updated to recent |
| versions. |
| - Support for Gstreamer 1.x has been added. |
| - OpenGL support for TI OMAP platforms has been added. |
| - OpenGL support for Allwinner platforms has been added. |
| - OpenMAX support for RasberryPi has been added. |
| |
| Updated/fixed packages: acl, attr, autoconf, avahi, barebox, |
| bind, binutils, busybox, bwm-ng, bzip2, cifs-utils, colletctd, |
| cpanminus, cups, curl, dash, dbus, dhcp, directfb, |
| directfb-examples, dnsmasq, dosfstools, dropbear, dtc, |
| e2fsprogs, ed, efl, enlightenment, erlang, ethtool, fbgrab, |
| fftw, firmware-imx, flot, fltk, freetype, gawk, gdk-pixbuf, |
| gettext, gmp, gnutls, gsl, gutenprint, gvfs, gzip, haserl, |
| hiawatha, httping, icu, imagemagick, imlib2, imx-lib, |
| intltool, iozone, ipset, iptables, jquery, jquery-keyboard, |
| jquery-sparkline, kmod, less, libart, libcdaudio, libcgicc, |
| libesmtp, libftdi, libfuse, libglib2, libgtk, libgtk2, libidn, |
| libiqrf, liblog4c-localtime, libnspr, libnss, libpcap, |
| libroxml, libserial, libsigsev, libsoup, libtool, libtpl, |
| libvncserver, libxml2, linphone, lm_sensors, logrotate, |
| ltrace, lttng, luafilesystem, luajit, minicom, monit, mpg123, |
| mtd, mutt, mxml, neard, netatask, netsnmp, nettle, |
| network-manager, nodejs, nss-mdns, openssh, openswan, openvpn, |
| opkg, opus, pcre, perl-cross, php, pixman, poco, polarssl, |
| pulseaudio, pv, python, python3, qt, qt5, qt5declarative, |
| qt5jsbackend, qt5quick1, readline, rpi-firmware, ruby, samba, |
| sane-backends, sconeserver, sdl_image, sdparm, ser2net, |
| socketcand, sqlite, squid, strace, tcl, tcpdump, tinyhttpd, |
| tvheadend, tzdata, uboot, udpcast, usb_modeswitch, |
| usb_modeswitch_data, usbutils, webkit, wireshark, wvstreams, |
| xapp_luit, xapp_xmodmap, xenomai, xfsprogs, xlib_libX11, zic, |
| zlib. |
| |
| New packages: a10disp, aespipe, am33x-cm3, cppcms, dhcpcd, |
| dropwatch, dtc, ecryptfs-utils, eglibc, elf2flt, fdk-aac, |
| gcc-final, gcc-initial, gcc-intermediate, git, |
| gpu-viv-bin-mx6q, gst1-plugins-bad, gst1-plugins-base, |
| gst1-plugins-good, gst1-plugins-ugly, gst-omx, |
| gst-plugin-x170, gstreamer1, jimtcl, lbase64, libassuan, |
| libbsd, libcec, libdvbsi, libedit, libgpgme, libqmi, |
| libqrencode, libsvg, libsvg-cairo, libunwind, libvpx, |
| linux-headers, lockdev, luabitop, luacrypto, lua-ev, |
| luaexpatutils, msgpack, ocrad, on2-8170-libs, |
| on2-8170-modules, p11-kit, pax-utils, ptpd, ptpd2, |
| python-pyro, ramspeed/smp, snappy, strongswan, sunxi-boards, |
| sunxi-cedarx, sunxi-mali, sunxi-tools, ti-gfx, tinymembench, |
| tree, tstools, uclibc, w_scan. |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #4718: python (built for powerpc) distutils has paths to host |
| compiler toolchain |
| #5516: appended device tree blobs on uImage fails |
| #6302: Versions of packages retrieved from github.com are wrong |
| #6308: dosfstools download link is wrong |
| #6326: Dropbear: Add options to allow better config for |
| different target devices (e.g. routers) |
| #6338: Wrong download link for minicom package |
| #6344: Wrong handling of license text files with same name and |
| different directory |
| #6374: gnutls package broken if linux cryptodev module |
| selected |
| #6410: omap3_beagle has uimage error load address error |
| |
| 2013.05, Released May 31th, 2013: |
| |
| Minor fixes. |
| |
| External toolchain wrapper fix for if host/usr/bin is placed |
| in the patch. |
| |
| Updated/fixed packages: acpid, at91bootstrap, czmq, elf2flt, |
| flex, jamvm, kmod, libplayer, libtirpc, libv4, |
| lttng-babeltrace, opengl, qt5jsbackend, udpcast, wvstreams |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #4868: Buildroot compile failure for toolchain/gdb-7.4/intl/reloc... |
| #4988: flex and m4 problems |
| #5912: obsolete CVS files |
| |
| 2013.05-rc3, Released May 25th, 2013: |
| |
| Minor fixes. |
| |
| Updated/fixed packages: aircrack-ng, bellagio, boost, crda, |
| dvb-apps, flot, libatomic_ops, libeXosip2, libosip2, libxml2, |
| mongrel2, poco, portaudio, pptp-linux, tvheadend, urg, weston, |
| wireshark |
| |
| 2013.05-rc2, Released May 15th, 2013: |
| |
| Fixes all over the tree. |
| |
| Default number of parallel jobs is now number of CPUs + 1. |
| |
| Defconfigs: Add Telit EVK-PRO3, AT91SAM9260-EK Nand flash. |
| |
| Updated/fixed packages: aircrack-ng, busybox, cairo, |
| classpath, curlftpfs, czmq, dbus, f2fs-tools, fan-ctrl, |
| filemq, gst-plugin-bad, gutenprint, hplip, json-c, |
| libatomic_ops, libcurl, libdrm, libglib2, libnspr, libnss, |
| libsha1, libsigsegv, libxcb, linknx, linux-pam, lttng-modules, |
| lttng-tools, matchbox-lib, mcookie, mesa3d, neon, pixman, |
| pulseaudio, python-nfc, qt5imageformats, quota, openssl, |
| sconeserver, strace, sylpheed, wvstreams, |
| xapp_{appres,bdftopcf,beforelight,bitmap,edires,fonttosfnt}, |
| xapp_{fslsfonts,fstobdf,iceauth,ico,listres,luit,mkfontdir}, |
| xapp_{mkfontscale,oclock,rgb,rstart,scripts,sessreg,setxkbmap}, |
| xapp_{showfont,smproxy,twm,viewres,x11perf,xauth,xbacklight}, |
| xapp_x{biff,calc,clipboard,clock,cmsdb,cursorgen,dbedizzy,ditview}, |
| xapp_x{dm,dpyinfo,driinfo,edit,ev,eyes,f86dga,fd,fontsel,fs,fsinfo}, |
| xapp_x{gamma,gc,host,input-calibrator,input,kbcomp,kbevd,kbprint}, |
| xapp_x{kbutils,kill,load,logo,lsatoms,lsclients,lsfonts,mag,man}, |
| xapp_x{message,mh,modmap,more,pr,prop,randr,rdb,refresh,set,setmode}, |
| xapp_x{setpointer,setroot,sm,stdcmap,vidtune,vinfo,wd,wininfo,wud}, |
| xcb-util, xcursor-transparent-theme, xdata_xbitmaps, |
| xdata_xcursor-themes, |
| xdriver_xf86-input-{evdev,joystick,keyboard,mouse,synaptics}, |
| xdriver_xf86-input-{tslib,vmmouse,void}, |
| xdriver_xf86-video-{ark,ast,ati,cirrus,dummy,fbdev,geode,glide}, |
| xdriver_xf86-video-{glint,i128,intel,mach64,mga,neomagic,newport}, |
| xdriver_xf86-video-{nv,openchrome,r128,savage,siliconmotion,sis}, |
| xdriver_xf86-video-{tdfx,tga,trident,v4l,vesa,vmware,voodoo,wsfb}, |
| xfont_encodings, xfont_font-adobe-{100,75}dpi, |
| xfont_font-utopia-{100dpi,75dpi,type1}, |
| xfont_font-{alias,arabic-misc,bh-100dpi,bh-75dpi}, |
| xfont_font-bh-lucidatypewriter-{100,75}dpi, xfont_font-bh-{ttf,type1}, |
| xfont_font-bitstream-{100dpi,75dpi,type1}, xfont_font-cronyx-cyrillic, |
| xfont_font-{cursor,daewoo,dec,isas,jis,micro}-misc, |
| xfont_font-ibm-type1, xfont_font-misc-{cyrillic,ethiopic,meltho,misc}, |
| xfont_font-{mutt,schumacher}-misc, |
| xfont_font-{screen-cyrillic,sony-misc,sun-misc,util}, |
| xfont_font-winitzki-cyrillic, xfont_font-xfree86-type1, |
| xlib_lib{FS,ICE,SM,X11,XScrnSaver,Xau,Xaw,Xcomposite,Xcursor}, |
| xlib_libX{damage,dmcp,ext,fixes,font,ft,i,inerama,mu,pm,randr}, |
| xlib_libX{render,res,t,tst,v,vMC,xf86dga,xf86vm}, |
| xlib_lib{dmx,fontenc,pciaccess,pthread-stubs,xkbfile}, xlib_xtrans, |
| xproto_{applewm,bigreqs,composite,damage,dmx,dri2,fixes}proto, |
| xproto_{fontcache,font,gl,input,kb,randr,record,render}proto, |
| xproto_{resource,scrnsaver,video,windowswm,xcmisc,xext}proto, |
| xproto_{xf86bigfont,xf86dga,xf86dri,xf86vidmode,xinerama,x}proto, |
| xserver_xorg-server, xutil_{makedepend,util-macros} |
| |
| Readded Packages: xapp_xinit |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #5054: amd64: cannot find init - due to missing /lib64 folder |
| |
| 2013.05-rc1, Released May 8th, 2013: |
| |
| Architectures: ARC support, Blackfin support, FLAT binary |
| format, ARM: Drop old CPU variants, add fa526/626, Marvell PJ4 |
| |
| Toolchains: Add new Microblaze external toolchains, Linaro |
| ARM/Aarch64 updates, GCC 4.6.4 / 4.7.3 / 4.8.0 added to |
| internal toolchain, default to GCC 4.7.x. Internal |
| Crosstool-ng backend deprecated. |
| |
| Defconfigs: Add Atmel at91sam9g45m10ek, freescale mpc8315erdb |
| & p1010rdb, Armadeus apf27 / apf28, Openblocks A6, Raspberry |
| pi, gnublin board. |
| |
| FS: LZO and XZ compression methods, extra ubifs options, |
| ext2 rev 0/1 and ext3/4 support. |
| |
| Patch handling: apply-patches now has .patch.xz support, |
| Patch logic reworked as discussed during Febrary dev days: |
| http://elinux.org/Buildroot:DeveloperDaysFOSDEM2013 |
| |
| <pkg>-rsync now excludes version control files. |
| |
| linux: uImage load address for ARM multiplatform kernels |
| |
| Infrastructure for multiple OpenGL / ES / EGL / OpenVG |
| providers, similar to how libjpeg / libjpeg-turbo is handled. |
| |
| Infrastructure for packages to add system users. |
| |
| kconfig: updated to 3.9-rc2, support make olddefconfig |
| |
| Updated/fixed packages: alsa-lib, alsa-utils, apr, apr-util, |
| argp-standalone, at, at91bootstrap, audiofile, aumix, avahi, |
| bash, blackbox, bind, binutils, bison, boost, bridge-utils, |
| busybox, ccache, cifs-utils, cmake, collectd, connman, |
| conntrack-tools, cpanminus, crosstool-ng, diffutils, directfb, |
| directfb-examples, divine, dmalloc, dnsmasq, dosfstools, |
| dropbear, e2fsprogs, ebtables, eeprog, erlang, ethtool, |
| fb-test-app, fbset, feh, ffmpeg, file, flex, flot, foomatic, |
| fxload, gd, gdb, gdisk, genimage, gettext, gmp, gnuchess, |
| gnutls, gob2, gperf, gpsd, gstreamer, haserl, hiawatha, htop, |
| httping, icu, inotify-tools, intltool, iproute2, ipset, |
| iptables, iw, jpeg, jquery, jquery-{sparkline,validation}, |
| json-c, kbd, kexec, kismet, kmod, lcdproc, libarchive, |
| libatasmart, libcap, libconfig, libconfuse, libcurl, libdrm, |
| libeet, libev, libevas, libeXosip2, libffi, libfribi, libfuse, |
| libgcrypt, libglib2, libgtk2, libid3tag, libmicrohttpd, |
| libnetfilter_acct, libnetfilter_conntrack, libnl, libpcap, |
| libplayer, libsigc, libv4l, libxcb, linenoise, linux-pam, |
| lm_sensors, ltp-testsuite, luajit, lzop, madplay, make, mdadm, |
| mediastreamer, memtester, mesa3d, |
| mobile-broadband-provider-info, monit, mpd, mpfr, mpg123, |
| mrouted, msmtp, nbd, ncurses, ndisc6, neard, neardal, neon, |
| netperf, netsnmp, nettle, nfacct, ntfs-3g, ofono, olsr, |
| omap-u-boot-utils, openssh, openssl, openswan, openvpn, |
| oprofile, orc, patch, pciutils, pcre, perl, php, poco, |
| polarssl, proftpd, psmisc, pulseaudio, python, |
| python-{bottle,netifaces,serial,setuptools}, qt, quagga, |
| quota, radvd, rpi-firmware, rpi-userland, rt-tests, sam-ba, |
| samba, sawman, sdl, ser2net, smartmontools, socat, socketcand, |
| speex, squid, stress, stunnel, sudo, syslinux, sysstat, |
| sysvinit, tcl, tcprelay, tinyhttpd, tslib, tvheadend, |
| uboot-tools, udev, ulogd, util-linux, vala, vtun, webkit, |
| xapp_{iceauth,luit,makefontscale,sessreg,setxkbmap,smproxy}, |
| xapp_{xauth,xcmsdb,xdpyinfo,xev,xgamma,xhost,xinput,xkbcomp}, |
| xapp_{xkbevd,xlsatoms,xlsclients,xmodmap,xpr,xprop,xrandr,xrdb}, |
| xapp_{xset,xwd,xwininfo}, xcb-{proto,util}, |
| xdriver_xf86-input-{evdev,joystick,keyboard,mouse,synptics}, |
| xdriver_xf86-input-{tslib,vmmouse,void}, |
| xdriver_xf86-video-{ark,ast,ati,cirrus,dummy,geode,glide,glint}, |
| xdriver_xf86-video-{i128,intel,mach64,mga,neomagic,newport}, |
| xdriver_xf86-video-{openchrome,r128,savage,siliconmotion,sis}, |
| xdriver_xf86-video-{tdfx,trident,vesa,vmware,wsfb}, xenomai, |
| xfont, xinetd, xkeyboard-config, xlib_lib{FS,ICE,SM,X11}, |
| xlib_libX{scrnSaver,au,aw,cursor,dmcp,ext,fixes,font,ft,i}, |
| xlib_libX{inerama,mu,pm,randr,res,tst,v,vMC,xf86dga,xf86vm}, |
| xlib_lib{dmx,fontenc,pciaccess,xkbfile}, xlib_xtrans, |
| xproto_{applevm,bigreqs,dri2,fonts,gl,input,kbd,record}proto, |
| xproto_{resource,scrnsaver,xcmisc,xext,x}proto, |
| xserver_xorg-server, xutil_makedepend, xz, zeromq |
| |
| New packages: aircrack-ng, bcusdk, chrony, crda, |
| cryptodev-linux, cppzmq, czmq, dtach, enscript, exfat, |
| exfat-utils, f2fs-tools, fan-ctrl, filemq, foomatic-filters, |
| genimage, genpart, glibmm, gnuplot, gtest, gutenprint, hplip, |
| iozone, jansson, jhead, jquery-keyboard, jquery-ui, |
| jquery-ui-themes, json-glib, json-javascript, lcms2, libpfm4, |
| libpthsem, libserial, libsigsegv, libtasn1, libwebsockets, |
| libxkbcommon, libxml++, linknx, log4cxx, mongoose, mongrel2, |
| mtools, ne10, nmap, nodejs, openobex, openpgm, poppler, |
| protobuf-c, python-m2crypto, python-thrift, qjson, qt5base, |
| qt5declarative, qt5graphicaleffects, qt5imageformats, |
| qt5jsbackend, qt5multimedia, qt5quick1, qt5script, qt5svg, |
| qt5webkit qt5xmlpatterns, rapidjson, redis, swig, texinfo, |
| tzdata, urg, ussp-push, wayland, webp, weston, wireless-regdb, |
| wireshark, wvdial, wvstreams, xcb-util-image, xcb-util-wm, |
| xcursor-transparent-theme, zic, zmqpp, zyre |
| |
| Removed packages: microperl, ocf-linux, xapp_xinit, |
| xapp_xplsprinters, xapp_xprehashprinterlist, |
| xfont_font-bitstream-speedo, |
| xlib_lib{Xfontcache,XprintAppUtil,XprintUtil,Xp,oldX,xkbui}, |
| xproto_{print,xf86rush}proto |
| |
| Deprecated packages: vala |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #1291: Add support for Faraday 526 arm processor (fa526) |
| #2683: cups does not install correctly to target |
| #3313: mesa3d fails to build |
| #5186: initramfs/cpio should support lzo compression |
| #5636: agetty - cannot get controlling tty error - need updated... |
| #5906: collectd client headers not exported |
| #5966: bison unnecessarily required as build dependency |
| #6140: --enable-fileinfo not applied for php package |
| #6164: openvpn usage of ip tool from Busybox |
| |
| 2013.02, Released February 28th, 2013: |
| |
| Misc manual updates. |
| |
| Updated/fixed packages: busybox, collectd, flashbench, |
| libgtk2, libupnp, mii-diag, quota |
| |
| 2013.02-rc3, Released February 26th, 2013 |
| |
| Minor fixes. |
| |
| Updated/fixed packages: conntrack-tools, dialog, |
| enlightenment, haserl, keyutils, libfif, libmad, |
| linux-firmware, linux-fusion, matchbox-desktop, matchbox-wm, |
| ruby, spawn-fcgi, vtun |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #5960: fusion.ko driver does not install to target rootfs |
| |
| 2013.02-rc2, Released February 19th, 2013 |
| |
| Fixes all over the tree. |
| |
| Various manual updates and fixes. |
| |
| Updated/fixed packages: busybox, collectd, gesftpserver, |
| glib-networking, gnutls, inotify-tools, libcurl, libffi, |
| libglib2, libtorrent, libvorbis, neard, network-manager, |
| ntfs-3g, openssl, qt, rpi-userland, rtorrent, thttpd, vim. |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #5906: collectd client headers not exported |
| |
| 2013.02-rc1, Released February 10th, 2013 |
| |
| Toolchain: Crosstool-ng 1.17.0, default to GCC 4.6.3, target |
| libraries install fixed. Add Linaro ARM |
| 2012.11/2012.12/2013.01, AArch64 12.11/12.12/13.01. Sourcery |
| CodeBench MIPS 2012.03/09. Infrastructure to warn about |
| missing 32bit support for binary toolchains. Toolchain wrapper |
| is now relocatable. Add GDB 7.5.1 / Remove 6.8 / 7.0 / |
| 7.1. Deprecate uClibc 0.9.31. |
| |
| Architecture: Xtensa fixes, add missing powerpc variants, arm |
| 1136jf-s rev1, add A5/A15, neon support toggle, OABI |
| deprecated. Sparc: drop old unused variants |
| |
| Bootloaders: At91bootstap: fix upstream URL, Barebox: add |
| 2012.12/2013.01/2013.02, remove 2012.08/09/10, lzop fixes, |
| environment image support, U-Boot: add 2013.01.01 |
| |
| Linux: fix appended dtb handling for v3.8+ kernels, support |
| multiple device trees |
| |
| Defconfigs: calao USB-A9260, snowball, QEMU PPC440 on ML507 |
| board, QEMU ARM Exynos4210, Kernel version in QEMU defconfigs |
| updated, at91rm9200df: misc fixes. Lock kernel headers to |
| match kernel. |
| |
| Infrastructure: Git download fixes. Toolchain make target |
| renamed from 'cross' to 'toolchain'. Eclipse integration |
| support. Option to set root password, post image scripts, |
| config scripts handling. |
| |
| Updated/fixed packages: alsa-lib, argp-standalone, argus, |
| arptables, atk, audiofile, axel, beecrypt, bind, bison, |
| bluez_utils, boost, cairo, can-utils, bmon, boa, busybox, |
| cairo, ccache, cdrkit, cifs-utils, cjson, cmake, collectd, |
| connman, coreutils, cpanminus, cups, dbus, dhcp, dialog, |
| diffutils, directfb, distcc, divine, dnsmasq, docker, |
| dosfstools, dstat, e2fsprogs, ebtables, ed, empty, ethtool, |
| expedite, fbset, fbv, ffmpeg, flex, fltk, fluxbox, freetype, |
| gadget-test, gawk, gdb, genext2fs, gettext, giblib, |
| glib-networking, gmp, gmpc, gnupg, gnutls, gpsd, |
| gst-plugins-{bad,base,good}, gstreamer, gzip, haserl, hdparm, |
| heirloom-mailx, hiawanta, hostapd, icu, imagemagick, imlib2, |
| inadyn, infozip, iproute2, ipset, iptables, iw, jpeg, jquery, |
| jquery-sparklines, jqeury-validation, kismet, kmod, lame, |
| libao, libcap, libcurl, libdvdnav, libdvdread, libecore, |
| libedbus, libedje, libeet, libefreet, libeina, libeio, |
| liberation, libelementary, libembryo, libethumb, libev, |
| libevas, libffi, libfribidi, libfuse, libgcrypt, libglib2, |
| libgpg-error, libgtk2, libhid, libidn, libmicrohttpd, libmpd, |
| libnl, libnspr, libnss, libogg, libpcap, libplayer, libpng, |
| libroxml, librsvg, libseccomp, libsigc, libsndfile, libungif, |
| libupnp, liburcu, libusb-compat, libvncserver, libvorbis, |
| libxml2, libxslt, lighttpd, links, linux-firmware, |
| linux-fusion, ltp-testsuite, ltrace, |
| lttng-{babel,libust,modules,tools}, lvm2, lua, luajit, lzop, |
| matchbox-{desktop,lib}, mdadm, metacity, midori, minicom, mpd, |
| mpfr, mplayer, mtd, mysql_client, ncurses, neon, netatalk, |
| networkmanager, nspr, ntfs-3g, nuttcp, ofone, olsr, openssl, |
| openvpn, opkg, oprofile, opus, opus-tools, orc, ortp, pango, |
| pciutils, pcmanfm, pcre, pcsc-lite, perl, php, pixman, |
| pkgconf, polarssl, pptp-linux, proxychains, pulseaudio, |
| python, python3, qemu, qextserialport, qt, quagga, radvd, |
| readline, rng-tools, rt-tests, rubix, ruby, sam-ba, samba, |
| sane-backends, sconeserver, scons, screen, sdl, sdl_gfx, |
| sdl_mixer, sdl_ttf, sdparm, sed, ser2net, smartmontools, |
| speex, sqlite, squid, sshfs, strace, sudo, sylpheed, tn5250, |
| taglib, tar, torsmo, transmission, tslib, uboot-tools, ulogd, |
| usb_modeswitch, util-linux, valgrind, vim, vsftpd, wavpack, |
| webkit, wipe, wireless_tools, wpa_supplicant, xapp_xinit, |
| xapp_xinput-calibrator, xapp_xman, xapp_xmh, xlib_libX11, |
| xlib_libXdmcp, xlib_libXft, xlib_libpthread-stubs, |
| xlib_xtrans, xproto_xcmiscproto, xproto_xextproto, |
| xserver_xorg-server, xstroke, xvkbd, xz |
| |
| New packages: b43-firmware, b43-fwcutter, bustle, |
| cache-calibrator, cegui06, celt051, classpath, curlftpfs, |
| dvb-apps, dvbsnoop, elfutils, enlightenment, firmware-imx, |
| flashbench, gd, gesftpserver, gst-fsl-plugins, httping, iftop, |
| imx-lib, jamvm, jpeg-turbo, keyutils, libatasmart, libcofi, |
| libebml, libevas-generic-loaders, libfslcodec, libfslparser, |
| libfslvpuwrap, libgsasl, libiscsi, libmatroska, libmcrypt, |
| libmhash, libqwt, libseccomp, libsha1, linenoise, mcrypt, |
| media-ctl, ncdu, neard, neardal, nettle, perf, polkit, |
| proxychains, python-bottle, python-pyparsing, rpi-firmware, |
| rpi-userland, sg3_utils, slirp, snowball-hdmiservice, spice, |
| spice-protocol, tcllib, tvheadend, udisks, usbredir |
| ux500-firmware, vde2, xcb-utils-keysyms, yavta, |
| zd1211-firmware |
| |
| Removed packages: customize, xdriver_xf86-input-{acecad,aiptek}, |
| xdriver_xf86-video-{apm,chips,i740,rendition,s3,s3virge,sisusb}, |
| xdriver_xf86-video-sun{cg14,cg3,cg6,ffb,leo,tcx}, |
| xdriver_xf86-video-{tsend,xgi,xgixp} |
| |
| Deprecated packages: xstroke |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #4237: building shared openssl w/-Os fails due to gcc bug |
| #5690: python3 does not obey to BR2_PACKAGE_PYTHON3_PYC_ONLY=y |
| #5602: python3 should install a "python" symbolic link |
| #5846: Extra slash added to last slash in URL |
| |
| 2012.11.1, Released January 3rd, 2013: |
| |
| Toolchain: Fixed non-largefile builds on recent Ubuntu |
| versions. |
| |
| Arch: fix missing x86/generic handling, Build for Xtensa with |
| longcalls option. |
| |
| Updated/fixed packages: dosfstools, qt |
| |
| 2012.11, Released December 2nd, 2012: |
| |
| Git shallow clone fix for older git version. |
| |
| Updated/fixed packages: ctuio, libtool |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #5726: List all the available hook points |
| |
| 2012.11-rc2, Released November 30th, 2012: |
| |
| Minor fixes around the tree. |
| |
| Various manual updates and fixes. |
| |
| Add checks for legacy features. |
| |
| Updated/fixed packages: acpid, alsa-lib, arptables, binutils, |
| busybox, ccache, cjson, cramfs, directfb, flex, fluxbox, gdb, |
| hiawatha, igh-ethercat, imagemagick, imlib2, lcdproc, |
| libdaemon, libecore, libhid, libmad, libpcap, libsigc, libusb, |
| linux-fusion, matchbox, ocf-linux, owl-linux, python, rrdtool, |
| scons, strace, sylpheed |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #5732: Error : package/alsa-lib/alsa-lib.mk |
| |
| 2012.11-rc1, Released November 17th, 2012 |
| |
| Fixes all over the tree and new features. |
| |
| Defconfigs: use u-boot 2012.10 on at91 and beaglebone, |
| sheevaplug + qemu: bump kernel version, add qemu-mips64-malta |
| + nitrogen6x defconfigs. |
| |
| Bootloaders: add u-boot 2012.07/10, ais target format, add |
| barebox 2012.08/09/10/11, linker overlap issue fix for |
| at91bootstrap, mxs-bootlets updated for new Barebox versions. |
| |
| Toolchains: binutils 2.23.1, gcc 4.7.2, default to gcc 4.6.x, |
| Codebench arm/sh/x86 2012.03/09, Linaro 2012.08/09/10. |
| Libtirpc support for modern glibc variants. Toolchain on |
| target has been deprecated. |
| |
| Initial Aarch64 support, Xtensa support re-added. |
| |
| Infrastructure: Use shallow git clone when possible, use |
| tarballs rather than git URLs for github. Moved to pkgconf |
| rather than pkg-config. System directory added, default |
| skeleton/device tables moved. More than 1 post-build script |
| can now be used. output/target now contains a |
| THIS_IS_NOT_YOUR_ROOT_FILESYSTEM warning, to help people |
| understand how to (not) use it. |
| |
| Manual has been reworked and extended. |
| |
| Legal-info: Lots of package annotations, CSV file fixes, |
| _LICENSE / _REDISTRIBUTE splitup, per-package hooks. |
| |
| Updated/fixed packages: acpid, alsa-lib, alsa-utils, |
| alsamixergui, attr, autoconf, automake, bash, bind, binutils, |
| bison, blackbox, bluez-utils, busybox, cairo, can-utils, |
| cifs-utils, cjson, cmake, collectd, connman, conntrack-tools, |
| coreutils, cups, cvs, dbus, dhcp, directfb, dmalloc, dnsmasq, |
| dropbear, e2fsprogs, ethtool, fbdump, feh, fftw, file, |
| flashrom, fluxbox, gdb, gdisk, gdk-pixbuf, genext2fs, gettext, |
| gnutls, gpsd, gqview, grep, gsl, gst-plugins-{bad,good}, |
| hdparm, hiawatha, hostapd, input-tools, iproute2, ipset, |
| iptables, iw, json-c, kexec, kmod, lcdproc, leafpad, less, |
| libcurl, libdrm, libdvdnav, libdvdread, libffi, libfuse, |
| libglib2, libhid, liblockfile, libmad, libmbus, libmnl, |
| libnetfilter_{acct,conntrack,cthelper,cttimeout,queue}, |
| libnfc, libnfc-llcp, libnfnetlink, libnl, libnspr, libnss, |
| libpcap, libplayer, libtool, libtorrent, liburcu, libv4l, |
| libxcb, libxml2, libxslt, links, linux-firmware, lm-sensors, |
| lmbench, lockfile-progs, logrotate, lshw, lsof, |
| lttng-babeltrace, lttng-tools, lua, luajit, mesa3d, microperl, |
| mii-diag, module-init-tools, mpc, mpd, mpg123, mplayer, |
| mtd-utils, mysql_client, nbd, ncurses, netatalk, netkitbase, |
| netkittelnet, netsnmp, newt, nfs-utils, openntpd, openssh, |
| openssl, opkg, patch, pciutils, pcre, php, poco, polarssl, |
| popt, portmap, pppd, procps, pulseaudio, python, python-nfc, |
| python-protobuf, qt, quota, rp-pppoe, rtorrent, sam-ba, samba, |
| scons, sdl_gfx, smartmontools, sqlite, squid, strace, sudo, |
| sylpheed, tcpdump, tremor, ttcp, tiff, unionfs, |
| usb_modeswitch, usbutils, util-linux, vala, valgrind, vpnc, |
| vsftpd, webkit, wget, which, wpa_supplicant, x11vnc, xapp_*, |
| xdriver_*, xenomai, xfont_*, xinetd, xl2tp, xlib_*, xlsclient, |
| xproto_*, xserver_xorg-server, xutil_util-macros, xz, zeromq |
| |
| New packages: arptables, at91bootstrap3, boot-wrapper-aarch64, |
| ccid, cpanminus, cpuload, erlang, evtest, fb-test-apps, |
| fxload, gdbm, gnupg, googlefontdirectory, grantlee, gsl, |
| lcdapi, liblo, liblog4c-localtime, libtirpc, linux-pam, |
| lua-msgpack-native, macchanger, mtdev, mtdev2tuio, nfacct, |
| opus, opus-tools, pcsc-lite, perl, pkgconf, python-meld3, |
| python3, qemu, qextserialport, qtuio, rpcbind, schifra, |
| sconeserver, supervisor, time, ulogd, usb_modeswitch_data, |
| yasm |
| |
| Deprecated packages: netkitbase, netkittelnet |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #807: [PATCH] samba - make iconv and smbd optional |
| #3049: binutils have a sysroot bug in ld |
| #5330: update vsftpd to 3.0.0 |
| #5486: libglib2 build fails on: libs/libglib-2.0.so: undefined... |
| #5666: Fails to build python 2.7.2 for 2440 arm |
| |
| 2012.08, Release August 31th, 2012 |
| |
| Updated/fixed packages: microperl, cups, luajit, rrdtool, |
| prboom, oprofile. |
| |
| Added license information for: sqlite. |
| |
| Changed the source URLs of all packages located on Sourceforge |
| in order to use the automatic mirror selection URL |
| downloads.sourceforge.net, and get rid of the |
| BR2_SOURCEFORGE_MIRROR option. |
| |
| 2012.08-rc3, Released August 25th, 2012 |
| |
| Updated/fixed packages: libglib2, netsnmp, freetype, libfuse, |
| libpng, x11vnc, zlib, gpsd, ifplugd, bash, distcc. |
| |
| Added license informations for: barebox, grub, syslinux, |
| uboot, xloader, yajl, zlib, zxing, alsa-lib, alsa-utils, |
| faad2, nano, fbdump, rsync, librsync, fontconfig, |
| inotify-tools, |
| |
| 2012.08-rc2, Released August 15th, 2012 |
| |
| Updated/fixed packages: imagemagick, sudo, crosstool-ng. |
| |
| Added license informations for: mxml, nanocom, empty, expat, |
| lua, lucjson, xinetd, cjson, luaexpat, lmbench, bwm-ng, |
| input-event-daemon, luajit, cgilua, copas, coxpcall, |
| luafilesystem, luasocket, rings, wsapi, xavante, libtpl, |
| avahi, busybox, libfcgi, ifplugd, libcgicc, libcurl, |
| libdaemon, libdnet, libgpg-error, libpcap, libpng, lighttpd, |
| mtd, openssl, psmisc, socat, spawn-fcgi. |
| |
| Fixes to Microblaze external toolchains |
| configuration. Improvements of the pkg-stats |
| script. Out-of-tree fix for the graph-depends script. |
| |
| Kernel headers version bump. |
| |
| 2012.08-rc1, Released August 1st, 2012 |
| |
| Fixes all over the tree and new features. |
| |
| Integration of a legal information reporting infrastructure, |
| which allows to generate detailed informations about the |
| licenses and source code of all components of a system |
| generated by Buildroot. License information will progressively |
| be added on packages. |
| |
| Default configuration files added for Calao-systems USB-A9263 |
| and Calao-systems USB-A9G20-LPW. |
| |
| External toolchains update: allow download of a custom |
| toolchain, add Linaro 2012.05 and 2012.06 for ARM, add |
| Blackfin toolchain 2012R1-BETA1, add Sourcery CodeBench MIPS |
| 2011.09. |
| |
| Allow the restriction of downloads to the primary site only. |
| This is useful for project developers who want to ensure that |
| the project can be built even if the upstream tarball |
| locations disappear. |
| |
| Add a 'System configuration' choice to select between 3 |
| different init systems: Busybox init, SysV init and Systemd |
| init. |
| |
| Cleanups to the package infrastructure. The visible change to |
| developers is that $(eval $(call AUTOTARGETS)) is now $(eval |
| $(autotools-package)), and similarly for other package |
| infrastructures and host packages. Refer to the documentation |
| for details. |
| |
| By default, automatic detection of the number of compilation |
| jobs to use, depending on the number of CPUs available. |
| |
| Improvements to generate systems with static libraries only |
| (infrastructure and package fixes). |
| |
| Add proper support in the Linux kernel package to generate |
| Device Tree Blobs or combined Device Tree / Kernel |
| images. This will be useful on Microblaze, PowerPC and ARM, |
| which are architectures making extensive use of the Device |
| Tree. |
| |
| Updated/fixed packages: audiofile, autoconf, automake, axel, |
| barebox, bash, beecrypt, berkeleydb, bind, bison, bluez_utils, |
| bonnie, boost, busybox, bsdiff, bwm-ng, bzip2, cifs-utils, |
| cgilua, cmake, connman, conntrack-tools, crosstool-ng, cups, |
| dbus, dhcp, dnsmasq, e2fsprogs, eeprog, ethtool, faad2, fbv, |
| ffmpeg, freetype, gmp, gnutls, gob2, gpsd, grep, |
| gst-plugins-base, gst-plugins-good, gzip, hiawatha, hostapd, |
| htop, icu, igh-ethercat, imagemagick, input-tools, iostat, |
| iproute2, ipset, iptables, iw, kmod, less, libcap, libgci, |
| libconfig, libcurl, libelf, libevas, libeXosip2, libexif, |
| libfuse, libidn, libmad, libmbus, libmnl, |
| libnetfilter-conntrack, libnl, libnspr, libnss, libogg, |
| libosip2, libpcap, libpng, libroxml, liburcu, libusb, libxml2, |
| libxslt, lighttpd, linux, ltrace, lttng-libust, lttng-modules, |
| lttng-tools, lua, m4, memtester, midori, mii-diag, |
| module-init-tools, mpfr, mpg123, mrouted, msmtp, mtd, mxml, |
| mysql_client, nasm, nbd, ncurses, nfs-utils, opencv, openocd, |
| openssl, pciutils, php, polarssl, portaudio, pppd, |
| pthread-stubs, pulseaudio, qt, quagga, quota, radvd, rpm, |
| rrdtool, samba, sam-ba, scons, sdl_gfx, sdl_sound, speex, |
| sqlite, squashfs, squid, sudo, synergy, syslinux, systemd, |
| tar, tcpdump, tcpreplay, udev, usbutils, valgrind, wget, |
| wpa_supplicant, wsapi, xavante, xserver_xorg-server, zlib |
| |
| New packages: cjson, collectd, dfu-util, dmidecode, elftosb, |
| fbterm, flashrom, freerdp, inadyn, libfreefare, |
| libnetfilter_cttimeout, libnfc, libnfc-llcp, liboping, |
| libtorrent, linphone, logsurfer, lshw, luacjson, luaexpat, |
| luajit, mediastreamer, mobile-broadband-provider-info, monit, |
| mxs-bootlets, nanocom, nss-mdns, ofone, omap-u-boot-utils, |
| opkg, ortp, owl-linux, python-id3, python-nfc, quota, |
| ramspeed, rtorrent, sound-theme-borealis, |
| sound-theme-freedesktop, sysprof, webrtc-audio-processing, |
| xinetd, zxing |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #1315: Allow use of older external toolchains without sysroot |
| support [won't fix] |
| #5276: Hiawatha needs to manage IPV6 if so [fixed] |
| #5360: buildroot fails when building "host-libglib2 2.30.2 |
| Building" [won't fix, upstream problem] |
| #5384: Can't build packages relying on gets on newer glibc |
| [fixed] |
| |
| 2012.05, Released May 30th, 2012: |
| |
| Updated/fixed packages: busybox, netsnmp, pptp-linux |
| |
| 2012.05-rc3, Released May 25th, 2012: |
| |
| Minor fixes around the tree. |
| |
| Infra: Fix for DOWNLOAD macro when using primary mirrors with |
| scp targets. |
| |
| Toolchain: Kernel headers 3.2.18 / 3.3.7. |
| |
| Updated/fixed packages: binutils, bison, busybox, cifs-utils, |
| gnuchess, gpsd, iperf, libmpeg2, mtd, ntfs-3g, oprofile, |
| xserver-xorg |
| |
| 2012.05-rc2, Released May 18th, 2012: |
| |
| Fixes all over the tree. |
| |
| Toolchain: uClibc: Use 0.9.33.2, Crosstool-ng: fix gperf |
| dependency, disable decimal floats support, Linux 3.2.17 / |
| 3.3.6 kernel headers. Fix sysroot copy handling for toolchains |
| without C++ support. |
| |
| Updated/fixed packages: apr, apr-util, ccache, dnsmasq, |
| heirloom-mailx, gdb, ndisc6, opencv, openssl, socat, vala |
| |
| 2012.05-rc1, Released May 10th, 2012: |
| |
| Fixes all over the tree and new features. |
| |
| Use /etc/os-release for version info rather than |
| /etc/br-version. |
| |
| CMake toolchain file moved to $HOST_DIR/usr/share/buildroot. |
| |
| Apply-patches.sh: cleanups, archived patches handling fixes, |
| support series files. |
| |
| Defconfigs: beaglebone, mx53qsb, pandaboard, qemu configs for |
| arm-vexpress/microblaze/ppc-mpc88544ds, use 3.2.x for |
| atngw100, use 3.3.x for qemu configs. |
| |
| Menu structure: Libraries moved out of multimedia section |
| |
| Atom processor support. Prescott fix, blackfin ABI fix, |
| Microblaze architecture support (using ext toolchain). Cleanup |
| architecture names, deprecate Xtensa support. |
| |
| Toolchain: Add GCC 4.4.7, 4.6.3, 4.7.0. uClibc 0.9.33.1, |
| default to uClibc 0.9.33.x, enable |
| UCLIBC_SUPPORT_AI_ADDRCONFIG by default, static and 64bit |
| fixes for external toolchains, linaro ext toolchains, new |
| sourcery codebench ext toolchains, GDB 7.4.1, crosstool-ng |
| 1.15.2. |
| |
| Bootloaders: U-Boot: add 2012.04.01, SPL and u-boot.img |
| support. Barebox: add 2012.04, remove 2011.12. |
| |
| Updated/fixed packages: alsa-lib, alsa-utils, at, atk, avahi, |
| barebox, berkeleydb, bind, bluez_utils, boost, busybox, |
| can-utils, ccache, cifs-utils, coreutils, cups, dbus, dhcp, |
| directfb, dnsmasq, doom-wad, dosfstools, e2fsprogs, expat, |
| fakeroot, feh, ffmpeg, file, fis, freetype, gamin, gawk, |
| gdk-pixbuf, gettext, giblib, glib-networking, gmp, gnutls, |
| gpsd, grep, gstreamer, gst-plugins-{bad,base,good,ugly}, |
| haserl, hdparm, imagemagick, iproute2, iptable, iw, kexec, |
| kmod, lame, libaio, libarchive, libatomic_ops, libconfig, |
| libcurl, libdvdnav, libdvdread, libedbus, libethumb, libffi, |
| libfuse, libglib2, libgtk2, libhid, libmad, libmbus, libmpeg2, |
| libnl, libplayer, libpng, libsigc, libsoup, libupnp, liburcu, |
| libusb, libusb-compat, libxml2, libxml-parser-perl, libxslt, |
| lighttpd, linux-firmware, linux-fusion, lite, lsof, ltrace, |
| lttng-libust, lua, m4, makedevs, microperl, mpd, mpfr, mpg123, |
| mrouted, mtd, mysql_client, nbd, ncftp, ncurses, neon, |
| netsnmp, network-manager, nfs-utils, ngrep, ntfs-3g, openntpd, |
| openssh, openssl, parted, pango, pcre, php, pixman, poco, |
| psmisc, pulseaudio, python, qt, quagga, radvd, rpm, rsync, |
| ruby, samba, sam-ba, sane-backends, sawman, screen, sdl_net, |
| smartmontools, speex, sqlite, squashfs3, squid, sshfs, sudo, |
| syslinux, sysstat, taglib, tcpdump, tftp-hpa, transmission, |
| tiff, tinyhttpd, uboot-tools, udev, uemacs, unionfs, usbutils, |
| util-linux, vala, valgrind, vim, vsftpd, wget, wipe, |
| wpa_supplicant, xdriver_xf86-{input-vmmouse,video-fbdev}, |
| xfsprogs, zlib |
| |
| New packages: apr, apr-util, audiofile, bellagio, |
| conntrack-tools, empty, fmtools, glib-networking, |
| heirloom-mailx, hiawatha, latencytop, lcdproc, libcap-ng, |
| libdmtx, libfcgi, libnetfilter_conntrack, libnfnetlink, |
| libtpl, localedef, minicom, msmtp, ndisc6, netatalk, |
| ocf-linux, openswan, parted, polarssl, protobuf, read-edid, |
| socketcand, stress, systemd, ushare, zeromq |
| |
| Deprecated packages: ttcp |
| |
| Removed packages: ntfsprogs |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #2353: [lua] fix build with 2010.08-rc1 |
| #2503: Microperl fails build on MIPSel or with Fedora13.x86_64 |
| #2557: [PATCH] mkfs.xfs complains about missing libxfs.so.0 |
| #2881: Can't build project statically with external toolchain |
| #3751: MIPS: fix BR2_GCC_TARGET_ABI for MIPS n64 |
| #4808: ccache may build against wrong zlib |
| #4880: New package lcdproc |
| #4886: New package protobuf |
| #4892: build fails on ltp-testsuite-20101031/testcases/kernel/fs/... |
| #4898: * make: [target-finalize] Error 1 (ignored)* |
| #4985: Qt 4.7.4 build crashes with Linux 2.6.29 |
| #4970: udev 181 fails to build if kernel version 3.3 is selected |
| #5018: dialog broken: exits with assert in uClibc |
| #5102: qt package moc, uic, rcc read from wrong place |
| #5144: Patch to fix ixon bug in uemacs |
| #5198: Line graphics output is broken in GNU Screen |
| #5204: Missing terminfo file(s) for GNU screen terminal type |
| |
| 2012.02, Released February 29th, 2012: |
| |
| Updated/fixed packages: libecore |
| |
| 2012.02-rc3, Released February 27th, 2012: |
| |
| Fixes all over the tree. |
| |
| Automatic host dependencies handling for cmake packages |
| fixed. Customize package deprecated as using a post-build |
| script is nowadays the preferred way of adding extra stuff to |
| the rootfs. |
| |
| Linux-headers 3.0.x / 3.2.x stable version bumped. |
| |
| QEMU defconfigs updated to 3.2.x kernels and readme fixed. |
| |
| Updated/fixed packages: dropbear, ffmpeg, libpng |
| |
| 2012.02-rc2, Released February 19th, 2012: |
| |
| Fixes all over the tree. |
| |
| Toolchain: uClibc: Added upstream post-0.9.33 fixes, Bump |
| linux-headers 3.0.x / 3.2.x stable versions. |
| |
| Documentation: Added makedev / <pkg>_DEVICES / |
| <pkg>_PERMISSIONS documentation. |
| |
| Updated/fixed packages: busybox, ffmpeg, gst-dsp, libecore, |
| libvncserver, mxml, python. |
| |
| 2012.02-rc1, Released February 12th, 2012: |
| |
| Fixes all over the tree and new features. |
| |
| Toolchain: Default to GCC 4.5.x, add binutils 2.22. Java |
| support removed, Powerpc SPE ABI support. GDB ELF support fix, |
| GDB 7.4, crosstool-NG 1.13.4. |
| |
| Gentargets: scp and mercurial support. |
| Autotools: derive host dependencies from target by default. |
| Packages can now declare device table snippets. |
| |
| Host utilities menu with commonly used host tools. |
| |
| defconfigs: qemu configs for x86-64, mips and sparc, at91 |
| defconfigs now use modern U-Boot / mainline Linux, added |
| lpc3250 defconfigs. |
| |
| uClibc: remove 0.9.30, backport unshare() support, add |
| 0.9.32.1 / 0.9.33, use same config for ctng. |
| |
| Bootloaders: U-Boot: add 2011.12, remove 2010.xx versions, |
| Barebox: add 2012.01/02, remove 2011.10/11, LPC32xx |
| bootloaders added. |
| |
| Various manual updates. Release tarballs now contain generated |
| manual in text/html/pdf formats. |
| |
| Buildroot now calls the stop function of scripts in |
| /etc/init.d at shutdown. |
| |
| Updated/fixed packages: atk, avahi, barebox, bash, beecrypt, |
| bind, binutils, bison, bluez_utils, bzip2, busybox, cairo, |
| ccache, cdrkit, coreutils, cramfs, dbus, dbus-glib, dialog, |
| diffutils, dmalloc, dropbear, e2fsprogs, ebtables, ed, |
| ethtool, expat, ffmpeg, file, fis, flex, fluxbox, fontconfig, |
| freetype, gawk, grep, gst-dsp, gst-ffmpeg, gst-plugins-base, |
| hdparm, hostapd, htop, i2c-tools, icu, iproute2, ipsec-tools, |
| ipset, iptables, iw, jpeg, kismet, lame, libcap, libcgi, |
| libev, libeXosip2, libffi, libftdi, libgpg-error, libgtk2, |
| libidn, libmms, libmnl, libmodbus, libnl, libogg, libosip, |
| libpcap, libpng, libraw1394, libroxml, libusb, libusb-compat, |
| libv4l, libvorbis, libxcb, libxml-parser-perl, libxslt, |
| lighttpd, links, lm-sensors, lua, m4, module-init-tools, mpc, |
| mesa3d, mpd, mpfr, mplayer, mtd-utils, nano, nbd, ncurses, |
| netperf, netsnmp, ntp, opencv, openocd, openssl, openvpn, orc, |
| pciutils, pcre, pixman, pkg-config, poco, popt, proftpd, |
| python, python-serial, qt, ruby, samba, sdl, sdparm, |
| squashfs3, sshfs, sqlite, squid, sudo, syslinux, tcl, tcpdump, |
| ti-utils, tiff, tremor, uboot, uboot-tools, udev, usbmount, |
| util-linux, vala, valgrind, vsftpd, wpa_supplicant, |
| xapp_{bdftopcf,mkfontdir,mkfontscale,xkbcomp,xcursorgen,xinit}, |
| xapp_xinput, xapp_xman, xcb-util, xdm, xenomai, |
| xf86-video-sis, xfont_{encodings,font-util}, |
| xlib_lib{fontenc,X11,Xau,Xcursor,Xdmcp,Xfixes,Xfont,Xrender}, |
| xlib_libxkbfile, xterm, xutil_makedepend, yajl |
| |
| New packages: boost, connman, dstat, expedite, explorercanvas, |
| feh, flot, giblib, igh-ethercat, imlib2, jquery, |
| jquery-sparklines, jquery-validation, jsmin, kmod, libecore, |
| libedbus, libedje, libeet, libeina, libelementary, libesmtp, |
| libethumb, libevas, libical, libmbus, liboauth, liburcu, |
| libvncserver, linux-firmware, |
| lttng-{babeltrace,libust,modules,tools}, NetworkManager, |
| open2300, python-distutilscross, python-dpkt, |
| python-netifaces, python-pygame, python-setuptools, rt-tests, |
| sam-ba, sane-backends, sqlcipher, transmission, unionfs, |
| xf86-input-tslib, xinput-calibrator |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #743: Add Transmission bit torrent option to buildroot |
| #755: Add Boost libraries as a package |
| #2299: Add crypto support to libsoup |
| #2617: Pixman 0.19.2 & Cairo 1.10.0 |
| #3403: libgpg-error: bump to version 1.10 |
| #3409: libgpg-error: download from gnupg.org |
| #3421: nano: make tiny flag optional |
| #3691: New EFL packages |
| #4664: Cannot patch AT91Bootstrap |
| #4700: setlocalversion not working for combination svn/ubuntu 11.10... |
| #4760: Qt: add host-pkg-config to dependency-list |
| |
| 2011.11, Released November 30th, 2011: |
| |
| Fixes all over the tree. |
| |
| Bump kernel headers / default Linux version to 3.1.4. |
| |
| Updated/fixed packages: ruby |
| |
| 2011.11-rc3, Released November 26th, 2011: |
| |
| Fixes all over the tree. |
| |
| Toolchain: Fix gdb dependencies for external toolchains, |
| adjust uClibc patches so they don't confuse modern versions of |
| patch, bump crosstool-ng, kernel headers and linux versions. |
| |
| Updated/fixed packages: busybox, freetype, mplayer, opencv, |
| php, rsyslog, ruby, thttpd, xapp_xf86dga |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #4357: Prevent patch commands from accessing source control |
| #4369: Fix permissions on untared lsof archive |
| |
| 2011.11-rc2, Released November 18th, 2011: |
| |
| Fixes all over the tree and new features. |
| |
| Updated asciidoc documentation |
| |
| Toolchain: Bumped 3.x stable kernel headers, use wget in |
| crosstool-ng as well, bump crosstool-ng version, gdb fixes, |
| uClibc sparc fix. |
| |
| Updated/fixed packages: distcc, file, gst-plugins-bad, libxcb, |
| mplayer, newt, qt, rpm, rrdtool, tar, tftpd |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #3355: mplayer fails to build |
| #4021: uClibc: undefined reference to `__GI___errno_location' |
| #4297: Qt's qmake uses wrong pkg-config |
| |
| 2011.11-rc1, Released November 11th, 2011: |
| |
| Fixes all over the tree and new features. |
| |
| Moved misc scripts and support stuff to support/. Renamed |
| patch-kernel.sh to support/scripts/apply-patches.sh. |
| |
| Documentation: Moved to asciidoc format, make targets to |
| generate text/html/pdf/epub output added. |
| |
| Defconfigs: Qemu configs updated to 3.1 kernel and readmes |
| added. |
| |
| Bootloaders: Add support for custom git tree / tarballs for |
| barebox, similar to how it's handled for u-boot. Clean up |
| menuconfig options. |
| |
| Toolchain: Update external codesourcery toolchain download |
| URLs after Codesourcery got bought by Mentor, add x86 |
| toolchain, update toolchain versions and optimize toolchain |
| sysroot copying. Fix uClibc 0.9.32 builds for e500 PPC, |
| updated GDB versions / download URLs. Binutils |
| libbfd/libopcodes static/dynamic linking fix. GCC 4.6.2 added, |
| use ctng-1.13.0. |
| |
| Package infrastructure: Support for local packages / |
| overrides, package dir / name arguments dropped from |
| {GEN,AUTO,CMAKE}TARGETS. |
| |
| Linux: Kernel extensions infrastructure support, Xenomai + |
| RTAI support. |
| |
| Updated/fixed packages: acpid, bind, busybox, dash, dbus, |
| dbus-glib, directfb, dnsmasq, drystone, e2fsprogs, ethtool, |
| fakeroot, fbdump, file, freetype, fuse, gamin, gmp, gmpc, |
| gnutls, gob2, gst-plugins-{base,bad,good,ugly}, gstreamer, |
| hostapd, ifplugd, imagemagick, intltool, ipsec-tools, ipset, |
| iptables, iw, jpeg, kexec, leafpad, less, libargtable2, libao, |
| libconfuse, libcuefile, libcurl, libdaemon, libevent, |
| libglib2, libiconv, libmpd, libreplaygain, libroxml, |
| libsamplerate, libsndfile, libsoup, libsvgtiny, libtool, |
| libxcb, lighttpd, links, linux-fusion, lite, lrzsz, lsof, lzo, |
| lzop, makedevs, mcookie, mpg123, mpd, mpfr, mtd, musepack, |
| mutt, mysql_client, ncftp, ncurses, neon, netcat, netsnmp, |
| ntfs-3g, ntfsprogs, ntp, openntpd, openssh, openssl, oprofile, |
| orc, pciutils, psmisc, python, qt, quagga, radvd, rpm, rsync, |
| samba, sawman, sdl_sound, smartmontools, sqlite, squid, |
| stunnel, sudo, sylpheed, sysstat, taglib, tar, tcpreplay, |
| tslib, usbutils, util-linux, valgrind, wget, whetstone, which, |
| wpa-supplicant, xdata_xcursor-themes, xmlstarlet, xterm |
| |
| New packages: bluez-utils, cifs-utils, fftw, fluxbox, json-c, |
| libev, libftdi, libgeotiff, libmodbus, libplayer, live555, |
| ngrep, noip, opencv, openocd, picocom, poco, portaudio, |
| pulseaudio, pv, rtai, vala, xenomai. |
| |
| Removed packages: liboil, sfdisk, swfdec, webif |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #505: live555: new package |
| #507: Enable live and tv options in MPlayer-1.0rc2 |
| #531: let e2fsprogs package to export headers to staging dir if needed |
| #1171: Linuxthreads new cannot find sysdep.h |
| #1357: Add bluez to buildroot system |
| #2107: New package: input-event-daemon |
| #2599: New package: orc (Oil Runtime Compiler) |
| #2605: gstreamer: Update to 0.10.30 |
| #2677: introducing util-linux-ng as replacement for util-linux |
| #2917: Qt: Add declarative module |
| #3145: jffs2 image generation fails |
| #3271: netperf-2.4.5 fails to compile |
| #3331: xdata_xcursor-themes depends on xcursorgen |
| #3343: Add file:// download SITE_METHOD |
| #3391: Add support for specifying an external kernel tree |
| #3631: Error while compiling with Xorg |
| #3709: oprofile doesn't build for mipsel |
| #3925: midori not getting compile |
| #4045: Add support for downloading i386 toolchains from codesourcery |
| #4165: lrzsz-fix-symlink-at-rebuild.patch |
| #4171: makedevs-unused-but-set-variable.patch |
| #4183: Codesourcery toolchain download site has changed |
| #4231: libneon.so: undefined reference to `SSL_SESSION_cmp' |
| #4381: Add option to lighttpd to enable Lua support |
| #4387: Make sure that dest dir exists before installing mtd files |
| |
| 2011.08, Released August 31th, 2011: |
| |
| Fixes all over the tree. |
| |
| Toolchain: Fix codesourcery 2009q3 ARM download, Linux 3.0.4 |
| kernel headers. |
| |
| Updated/fixed packages: ipset, python |
| |
| 2011.08-rc2, Released August 29th, 2011: |
| |
| Fixes all over the tree. |
| |
| Toolchain: crosstool-NG 1.12.1, use binutils 2.21 on |
| mips/sh/older uClibc, disallow uClibc 0.9.32 on avr32/sh |
| (broken). |
| |
| Defconfigs: kernel updates, fix mini2440 serial port config, |
| remove old arm toolchain configs. |
| |
| Bootloaders: Fix grub patching, add barebox-{n,x,menuconfig} |
| targets similar to linux/busybox. |
| |
| Updated/fixed packages: barebox, directfb, libsoup, |
| libxml-parser-perl, mtd, ncurses, python, ti-utils, udev, |
| usbmount, util-linux, xfont_font-misc-misc |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #3685: ncurses installation hangs due to old version of tic |
| #4093: Grub fails to install bz2 patch after conversion to... |
| |
| 2011.08-rc1, Released August 4th, 2011: |
| |
| Fixes all over the tree and new features. |
| |
| Toolchain: uClibc 0.9.32 / NPTL support, 0.9.29 removed, |
| ext-toolchain-wrapper improvements, improved non-MMU |
| support. GCC 4.3.6 / 4.6.1. |
| |
| GENTARGETS infrastructure extended to cover bootloaders and |
| Linux kernel as well. Options to retrive Linux/U-Boot from a |
| custom git repo instead of upstream tarballs. |
| Support for Linux 3.x and release candidate tarballs. |
| X-Loader bootloader for omap added. |
| |
| Make source/external-deps now also works for external |
| toolchains / crosstool-ng backend. |
| |
| Updated/fixed packages: autoconf, berkeleydb, bind, binutils, |
| bmon, bridge-utils, busybox, cmake, dbus, dbus-glib, |
| e2fsprogs, ethtool, ffmpeg, gst-plugins-{bad,base,good,ugly}, |
| gvfs, hostapd, iproute2, iptables, iw, jpeg, lame, libarchive, |
| libdnet, libdrm, libgcrypt, libgtk2, libmpeg2, libpng, |
| libsoup, lighttpd, linux-fusion, lzo, midori, mtd-utils, |
| nfs-utils, openvpn, oprofile, orc, pkg-config, proftpd, qt, |
| ruby, samba, sdl, shared-mime-info, sudo, sqlite, squid, |
| synergy, udev, usbmount, usbutils, util-linux, valgrind, |
| webkit, xorg-xserver, xz, zlib |
| |
| New packages: acl, attr, ebtables, gnutls, inotify-tools, |
| ipset, libargtable2, libiqrf, libmnl, libnspr, libnss, |
| libroxml, libyaml, live555, mxml, orc, rsyslog, sredird, |
| statserial, stunnel, ti-utils, uboot-tools, yajl |
| |
| Deprecated packages: liboil, swfdec |
| |
| Removed packages: hal |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #3559: libnspr: Add new package |
| #3595: patch to add libroxml |
| #3565: libnss: Add new package |
| #3583: xfonts_font-adobe-100dpi fails due to missing map file |
| #3649: [PATCH] Add mapdir to existing pkg-config patch |
| #3907: 2011.05 - Qt 4.7.3 not building on ARM |
| #3961: Nfs-utils: Remove SUSv3-function index |
| #3985: "help" target's defconfig list needs sort |
| #3997: bump libroxml to v2.1.0 |
| |
| 2011.05, Released May 27th, 2011: |
| |
| Updated/fixed packages: makedevs |
| |
| 2011.05-rc2, Released May 24th, 2011: |
| |
| Fixes all over the tree. |
| |
| Toolchain: Code sourcery ARM 2009q1 download URL fixed / |
| 2009q3 external toolchains added. Crosstool-NG bumped to |
| 1.11.3, eglic/glibc configuration fixes. Linux kernel 2.6.38.x |
| bumped to 2.6.38.7. |
| |
| Updated/fixed packages: bind, fakeroot, kbd, psmisc, qt |
| |
| 2011.05-rc1, Released May 18th, 2011: |
| |
| Fixes all over the tree and new features. |
| |
| External toolchain improvements: We now build a binary |
| toolchain wrapper and install it into HOST_DIR/usr/bin, which |
| enforces the correct compiler arguments, making an external |
| toolchain as easy to use outside of Buildroot as the internal |
| ones are. This also brought a cleanup of CFLAGS, making the |
| Buildroot build output easier to read. |
| |
| Rootfs device handling improvements: Choice between static |
| /dev, devtmpfs and devtmpfs with either mdev or udev. |
| |
| Toolchain: More preconfigured codesourcery external |
| toolchains, improved Crosstool-NG support, fix for GCC |
| snapshot versions, GCC 4.4.6 / 4.5.3, experimental GCC 4.6.0 |
| support, target-GCC fixes, uClibc fixes, 0.9.32-rc3 support. |
| |
| Bootloaders: U-boot 2011.03, Barebox 2011.05.0 |
| |
| Linux: support for custom kernel image targets, E.G. for |
| powerpc builds with embedded device trees. |
| |
| Misc fixes for qemu defconfigs, ensuring correct serial |
| terminal setup out of the box. |
| |
| Misc gentarget / autotools handling fixes. |
| |
| Updated/fixed packages: alsa-lib, alsa-utils, alsamixergui, |
| atk, avahi, bind, bison, busybox, copas, dbus-glib, dhcp, |
| dhcpdump, dnsmasq, dropbear, ethtool, fakeroot, ffmpeg, file, |
| gamin, gnuconfig, gst-ffmpeg, gst-plugins-good, gtk2-engines, |
| haserl, hostapd, icu, imagemagick, iproute2, iw, kismet, less, |
| libcap, libdnet, libglade, libglib2, libgtk2, libnl, libpng, |
| libxml2, libxml2, libxslt, lighttpd, lockfile-progs, makedevs, |
| midori, mpg123, mpc, mpd, mpfr, mplayer, mtd-utils, ncurses, |
| netsnmp, openssh, openssl, openvpn, pango, pkg-config, popt, |
| procps, proftpd, qt, quagga, readline, rsync, samba, sdl, |
| socat, squashfs, squid, sudo, tslib, udev, usbutils, webkit, |
| wpa_supplicant, xerces, xfont_font-misc-misc, xlib_libX11, |
| xlib_libXfont, xlib_xtrans, xorg-server, xterm, xz |
| |
| New packages: bonnie++, can-utils, gdisk, htop, |
| input-event-daemon, libexif, libraw, libv4l, ngircd |
| |
| Removed packages: festival |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #2131: Add OpenMP support to the toolchain |
| #3379: New Package: bonnie++ |
| #3445: Not working openssl-10.0.0d on 386sx |
| #3451: fakeroot package: wrong FAKEROOT_SITE variable |
| #3457: alsamixergui: broken URL |
| #3475: Calling sync on large filesystems when not always necessary |
| #3511: make busybox-menuconfig does not download busybox package |
| #3541: Quotes in the top Makefile:217 break buildroot/kernel config... |
| #3571: u-boot: fw_printenv does not build |
| #3643: popt source url is not responding |
| #3733: dropbear: make zlib optional |
| #3757: Buildroot can't build mplayer with libmad |
| |
| 2011.02, Released February 28th, 2011: |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: alsamixergui, avahi, ffmpeg, icu, mpd, |
| nuttcp, qt, slang, squashfs, sylpheed, synergy, xerces |
| |
| Deprecated packages: devmem2, webif |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #2911: Qt: Disable qt3support-option, if gui-module isn't selected |
| #3259: Unable to build webkit (on arm) |
| #3295: slang fails to build on mipsel |
| #3325: ffmpeg fails to build |
| |
| 2011.02-rc2, Released February 24th, 2011: |
| |
| Fixes all over the tree. |
| |
| Festival packages marked as broken. Unless someone steps up |
| to support them, they will be removed during the 2011.05 |
| development cycle. |
| |
| Updated/fixed packages: atk, avahi, bind, cairo, dbus, |
| enchant, fakeroot, gmpc, gpsd, gvfs, iperf, jpeg, libarchive, |
| libcgicc, libdaemon, libdrm, libevent, libgail, libglib2, |
| libgpg-error, libmicrohttpd, librsvg, libsoup, libxcp, |
| makedevs, matchbox-fakekey, matchbox-startup-monitor, mdadm, |
| metacity, mpd, nasm, nfs-utils, olsr, openssl, popt, |
| pthread-stubs, quagga, rpm, samba, sdl, sdl_gfx, sdl_image, |
| sdl_mixer, sdl_sound, sdl_ttf, squashfs, synergy, taglib, |
| tcpreplay, tiff, wpa_supplicant, xcb-util, |
| xdriver_xf86-input-{acepad,aiptek,evdev,joystick,keyboard}, |
| xdriver_xf86-input-{mouse,synaptics,void}, |
| xdriver_xf86-video-{chips,dummy,geode,glide,intel,nv,wsfb}, |
| xlib_lib{ICE,SM,XScrnSaver,Xau,Xcursor,Xdmcp,Xi,Xinerama}, |
| xlib_lib{Xrandr,Xt,Xtst,Xxf86dga,Xxf86vm,dmx,fontenc,pciaccess}, |
| xserver_xorg-server, xz |
| |
| Removed packages: ace_of_penguins, vlc |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #3205: Failing chmod when running "make" in buildroot (openssl)... |
| #3277: quagga fails to build with SNMP support |
| #3283: See why nfs-utils needs fakeroot, and convert to autotools |
| #3307: synergy fails to build due to missing XTest library |
| |
| 2011.02-rc1, Released February 14th, 2011: |
| |
| Fixes all over the tree and new features. |
| |
| External toolchain improvements: clarification of the options, |
| and introduction of the toolchain profile concept, for |
| well-known toolchains. Buildroot is now capable of |
| automatically downloading and extracting well-known toolchains |
| (for the moment, CodeSourcery ARM, PowerPC, MIPS and SuperH |
| toolchains are supported). Crosstool-NG backend updated and |
| improved. |
| |
| Complete rework of how hardware boards are supported. |
| Each board now only has a single defconfig file, and all |
| board-specific options have been removed. See |
| docs/buildroot.html#board_support for details. |
| |
| Added support for the following boards: Mini2440, Qemu ARM |
| Versatile, Qemu MIPSel Malta, Qemu PowerPC G3beige, Qemu SH4 |
| r2d and Qemu x86. The Qemu boards support allows to easily |
| build systems that are known to work under Qemu. |
| |
| Initial support for Blackfin processors. |
| |
| Staging directory moved into $(O)/host/usr/<tuple>/sysroot, in |
| preparation for support of SDK. For the same reason, the |
| toolchain binaries (cross-compiler and other related tools) |
| are now installed in $(O)/host/usr/bin/. The cross pkg-config |
| now also automatically returns correct values for cross |
| compilation, without needing any environment variables to be |
| set. |
| |
| Ccache support reworked. Now used for both host and target |
| compilation, and cache is stored in ~/.buildroot-ccache. |
| |
| Toolchain: uClibc 0.9.32-rc2, several components moved to |
| normal AUTOTARGET packages. |
| |
| Generic cmake infrastructure, similar to the existing |
| GENTARGETS/AUTOTARGETS. |
| |
| Support for bzr downloads, next to the existing git/svn support. |
| |
| Kconfig infrastructure rebased against 2.6.38-rc3, bringing |
| misc fixes. 'xconfig' now uses Qt4 rather than Qt3. |
| |
| EXT2 file system size handling improved, UBI image support, fs |
| configuration options cleanup, U-Boot/Barebox version bumps. |
| |
| Updated/fixed packages: alsa-utils, at, autoconf, automake, |
| bash, binutils, bison, busybox, bzip2, cdrkit, cloop, cmake, |
| coreutils, cups, dbus, dbus-python, dhcp, directfb, |
| direcfb-examples, dmalloc, dnsmasq, dosfstools, e2fsprogs, ed, |
| fbset, ffmpeg, findutils, flac, freetype, gdk-pixbuf, gmp, |
| grep, gperf, gst-ffmpeg, gst-plugins-bad, gst-plugins-base, |
| gst-plugins-good, gst-plugins-ugly, gstreamer, gvfs, hdparm, |
| hostapd, i2c-tools, icu, imagemagick, input-tools, iproute2, |
| iptables, iw, jpeg, kexec, libaio, libart, libcap, libconfig, |
| libfuse, libglib2, libidn, libmad, libogg, libpcap, libpng, |
| libsndfile, libtheora, libtool, libusb-compat, libvorbis, |
| libxcb, libxml2, libxslt, links, linux-fusion, lm-sensors, |
| lsof, ltp-testsuite, ltrace, lvm2, lzo, m4, makedevs, |
| memtester, mesa3d, mii-diag, mpc, mpfr, mpg123, mplayer, |
| mrouted, mtd-utils, nano, netperf, netplug, ntfs-3g, ntp, |
| openssh, openssl, openvpn, oprofile, pango, patch, pciutils, |
| php, pkgconfig, portmap, psmisc, python, qt, rsync, ruby, |
| sawman, screen, sdl_gfx, sdl_sound, smartmontools, socat, |
| sqlite, squid, sshfs, sstrip, sysklogd, sysstat, sysvinit, |
| tar, tcpdump, tslib, udev, usbutils, vim, vtun, webkit, wipe, |
| x11vnc, xapp_xlogo, xcb-proto, xfont_font-util, |
| xkeyboard-config, xlib_libX11, xz, zlib |
| |
| New packages: dhrystone, dsp-tools, faad2, fbgrab, gst-dsp, |
| gst-omapfb, irda-utils, lame, libao, libcue, libcuefile, |
| libffi, libhid, libreplaygain, libsamplerate, libsigc++, |
| lsuio, mpd, musepack, python-mad, python-serial, rsh-redone, |
| sdparm, tidsp-binaries, vorbis-tools, wavpack, whetstone, |
| xl2tp, xmlstarlet |
| |
| Removed packages: hotplug, l2tp, libfloat, microcom, |
| ng-spice-rework |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #267: The make target: cross fails because toolchain_build_... |
| #415: Berkeley DB: mut_pthread.o: relocation R_X86_64_32 against... |
| #561: ltp-testsuite failed to install |
| #1447: Installing gfortran on PowerPC |
| #1651: Build fail caused by ccache in module-init-tools |
| #1681: Cross-compiled binaries shouldn't be installed into staging |
| #1723: [PATCH] axel: convert to generic package infrastructure and... |
| #1735: [PATCH] mplayer: convert to autotools infrastructure |
| #2551: [PATCH] native toolchain in the target filesystem fails |
| #2623: buildroot-snapshot-20100922 fails when compiling development... |
| #2647: makedevs package lacks support for 16-bit major/minor numbers |
| #2371: QT MYSQL Module does not build when MySQL installed on the host |
| #2839: compile fails in various packages with a odd message "error:... |
| #2887: tar "buffer overflow detected" error |
| #2893: Broken "make source" with external toolchain |
| #2905: Qt: Speed up compilation, if gui-module isn't selected |
| #2929: genext2fs: couldn't allocate a block (no free space) |
| #2935: Ntpdate isn't installed |
| #2965: Broken linkage to xkbcomp (blocking X server startup) |
| #2983: xlib_libX11 build failed |
| #3007: kexec doesn't build: Missing regdef.h file |
| #3085: Init scripts are not compatible with sysVinit (when busybox... |
| #3103: make external-deps wants to download gcc-.tar.bz2 when... |
| #3109: abnormal `make busybox-menuconfig` |
| #3115: How about board specific makefiles? |
| #3169: python patch has typo, aborts build in scenario |
| #3181: dhcp.mk copies S80dhcp-server to etc/init.d, not etc/init.d/ |
| |
| 2010.11, Released November 30th, 2010: |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: libgcrypt, qt, squid, sysstat, tcpdump, |
| xserver-xorg |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #2773: squid with openssl support needs openssl on the host |
| #2857: OBJDUMP definition is missing from TARGET_CONFIGURE_OPTS |
| |
| 2010.11-rc2, Released November 25th, 2010: |
| |
| Fixes all over the tree. |
| |
| Add support for LEON Sparc architecture variants. Fix make |
| source/external-deps for host packages. |
| |
| Updated/fixed packages: bash, bind, busybox, dialog, gpsd, |
| libglib2, libcurl, libmad, lrzsz, midori, module-init-tools, |
| mtd-utils, openssh, openssl, pciutils, php, qt, sqlite, |
| sysstat, webkit, zlib |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #759: Sysstat build broken without libintl |
| #2479: host-module-init-tools 3.11 fails to build |
| #2725: Buildroot overrides kernel config |
| #2785: mtd-utils build fails due to missing libmtd |
| #2791: Added PHP-Process Control to the PHP-Package |
| #2797: pciutils dependencies on zlib not taken into account |
| #2809: failed to compile libglib2 |
| #2821: [PATCH] Patch for JavaScriptCore in QtWebKit module |
| #2827: qt-4.7.0-pthread_getattr_np.patch invalid for qt 4.6... |
| #2833: Failed to compile webkit without X11 |
| |
| 2010.11-rc1, Released November 8th, 2010: |
| |
| Fixes all over the tree and new features. |
| |
| Kconfig infrastructure rebased against 2.6.36-rc1, bringing |
| misc fixes + nconfig and savedefconfig targets. |
| |
| Toolchain: ARM cortex A9 support, experimental crosstool-ng |
| backend, GCC 4.5.x. |
| |
| Fs: Squashfs 4.1 with lzo support |
| |
| Old-style package hooks (*_HOOK_POST_*) removed. Use the more |
| generic new-style ones instead. |
| |
| Download handling reworked and support for git/svn downloads |
| added. |
| |
| Removed experimental shared config.cache support, as it is |
| too unreliable. |
| |
| A convenience Makefile wrapper is created when using |
| out-of-tree building, similar to how it is done for the kernel. |
| |
| Alpha, Cris, IA64 and Sparc64 architecture support removed. |
| |
| New packages: argp-standalone, gdk-pixbuf, gpsd, gst-ffmpeg, |
| libmpeg2, kbd, librsvg, nuttcp, rng-tools, rrdtool, xz |
| |
| Updated/fixed packages: acpid, alsa-lib, argus, at, autoconf, |
| automake, avahi, axel, beecrypt, berkeleydb, bind, bmon, boa, |
| bootutils, bridge-utils, bsdiff, busybox, cvs, dbus, directfb, |
| dmraid, docker, dosfstools, dropbear, e2fsprogs, ethtool, |
| expat, ezxml, fbset, fconfig, ffmpeg, freetype, gadgetfs-test, |
| gamin, gawk, genext2fs, gperf, gst-plugins-base, |
| gst-plugins-ugly, gtk2-themes, gtkperf, gvfs, haserl, hdparm, |
| hostapd, hwdata, ifplugd, imagemagick, iperf, ipsec-tools, |
| iproute2, iptables, iw, jpeg, kexec, kismet, less, libcgi, |
| libcurl, libdaemon, libdnet, liberation, libevent, libeXosip2, |
| libglade, libgtk2, libiconv, libidn, libintl, libmms, libmpd, |
| libnl, liboil, libosip2, libpcap, libpng, libtool, libungif, |
| libxml2, libxslt, lighttpd, lite, lm-sensors, lockfile-progs, |
| logrotate, m4, matchbox, mdadm, mesa3d, metacity, mplayer, |
| mtd-utils, mysql_client, nano, nbd, ncftp, neon, netperf, |
| netsnmp, ng-spice-rework, ntfsprogs, ntp, openntpd, openssh, |
| openssl, openvpn, oprofile, pango, patch, pcre, php, |
| pkg-config, portmap, pppd, pptp-linux, prboom, proftpd, radvd, |
| rdesktop, readline, rp-pppoe, ruby, qt, quagga, samba, sawman, |
| sdl_mixer, sdl_sound, sed, setserial, shared-mime-info, slang, |
| speex, sqlite, squashfs, startup-notification, strace, |
| sylpheed, sysstat, taglib, tcpdump, thttpd, tiff, tn5250, |
| torsmo, tslib, udev, udpcast, usbmount, usbutils, vsftpd, |
| vtun, which, wireless-tools, wpa_supplicant, xapp_twm, |
| xapp_xbacklight, xapp_xcursorgen, xapp_xinit, xapp_xinput, |
| xapp_xmore, |
| xdriver_xf86-input-{acecad,aiptek,evdev,joystick,keyboard}, |
| xdriver-xf86-input-{mouse,synaptics,vmmouse,void}, |
| xdriver-xf86-video-{apm,ark,ast,ati,chips,cirrus,dummy,fbdev}, |
| xdriver-xf86-video-{geode,glide,glint,i128,i740,intel,mach64}, |
| xdriver-xf86-video-{mga,neomagic,newport,nv,openchrome,r128}, |
| xdriver-xf86-video-{rendition,s3,s3virge,savage,siliconmotion}, |
| xdriver-xf86-video-{sis,sisusb,suncg3,suncg6,suncg14,sunffb}, |
| xdriver-xf86-video-{sunleo,suntcx,tdfx,tga,trident,v4l,vesa}, |
| xdriver-xf86-video-{vmware,voodeo,wsfb,xgi,xgixp}, |
| xkeyboard-config, xlib_libX11, xserver_xorg-server, xstroke, |
| xterm, xvkbd, zlib |
| |
| Deprecated packages: hotplug, lzma, ng-spice-rework, sfdisk |
| |
| Removed packages: dillo, libglib12, libgtk12, microwin, |
| pcmcia |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #901: new package: gpsd |
| #2389: Generate a Makefile wrapper in $(O) |
| #2461: wireless_tools: install shared library if needed |
| #2521: Can't compile sdl_mixer, mikmod.h can't be found |
| #2533: xserver_xorg-server: Enable glx, if mesa3d is built |
| #2563: [PATCH] cairo: Expose the configure option to disable some... |
| #2581: libmms: Update to 0.6, and patch to work on architectures... |
| #2707: Can't compile linux kernel using buildroot + crosstool-ng |
| #2731: Build order |
| #2737: buildroot configuration tool crashing when the path exceeds... |
| #2767: Build for lsof broken in buildroot-2010.08 |
| |
| 2010.08: Released August 31th, 2010: |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: atk, xstroke |
| |
| Removed packages: lxdoom |
| |
| 2010.08-rc2, Released August 30th, 2010: |
| |
| Fixes all over the tree. |
| |
| Mark the combination of uClibc 0.9.31, gcc 4.2.x, C++ and |
| locale support as broken. Remove deprecated GCC 4.2.[1-3] |
| versions. |
| |
| Mark CRIS architecture as deprecated, as it is discontinued |
| upstream. |
| |
| Marked shared config.cache as experimental and disabled by |
| default as it is known to break with certain package |
| combinations. |
| |
| Toolchain: fixed gcc 4.2.x build after uClibc NPTL support got |
| added. |
| |
| fs: old-style squashfs for big endian archs fixed. |
| |
| Updated/fixed packages: busybox, gst-plugins-base, |
| imagemagick, kismet, libgail, libglib2, libgtk2, lua, |
| luafilesystem, lzo, ncurses, netcat, pango, php, pppd, |
| proftpd, qt, samba, startup-notification, swfdec, sysvinit, |
| util-linux |
| |
| Removed packages: stunnel |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #635: util-linux fails to build in 2009.08 |
| #2239: netcat package installs its binary to target as avr32-linux... |
| #2395: libglib2-2.24.1 and libxml2-2.7.7 fails build on MIPS because... |
| #2443: Initramfs: Don't overwrite $(TARGET_DIR)/init if it exists |
| #2449: Minor fixes for squashfs makefile and correct PowerPC e500 ... |
| |
| 2010.08-rc1, Released July 30th, 2010: |
| |
| Fixes all over the tree and new features. |
| |
| Toolchain: GCC 4.3.5, older 4.3.x versions removed. GCC 4.1.2 |
| and non-sysroot support removed. Added support for (snapshot) |
| NPTL in uClibc, 0.9.28.3 removed, |
| |
| Bootloaders: Various cleanups, moved to boot/, added Barebox, |
| removed yaboot. Support building u-boot from custom tarball, |
| u-boot 2010.06. |
| |
| New GTK-based configurator, usable using 'make gconfig'. |
| |
| Java packages marked as broken. Unless someone steps up to |
| support this, they will be removed during the 2010.11 |
| development cycle. |
| |
| Alpha, IA64 and Sparc64 architectures marked as deprecated. |
| GTK+ on DirectFB has also been marked as deprecated, as it is |
| not supported in recent GTK+ versions, and more and more |
| packages depends on the new versions. |
| Unless someone steps up to support them, they will be removed |
| during the 2010.11 development cycle. |
| |
| New packages: cgilua, copas, coxpcall, ffmpeg, libsvgtiny, |
| libgail, luafilesystem, luasocket, rings, wsapi, xavante, xterm |
| |
| Updated/fixed packages: alsa-lib, alsamixergui, at, atk, |
| avahi, berkeleydb, bash, blackbox, busybox, bzip2, cairo, |
| cdrkit, cmake, dash, dhcp, dialog, diffutils, distcc, dmalloc, |
| dnsmasq, dropbear, e2fsprogs, fbv, file, flex, fontconfig, |
| gawk, gmpc, gnuchess, gst-plugins-base, gst-plugins-good, |
| gstreamer, gzip, icu, intltool, iostat, ipsec-tools, iptables, |
| iw, libart, libcgi, libcurl, libdrm, libeXosip, libfuse, |
| libglib2, libgpg-error, libiconv, libidn, liblockfile, libpng, |
| libsoup, lighttpd, links, linux-fusion, lmbench, lrzsz, |
| ltrace, make, midori, module-init-tools, mplayer, |
| mysql_client, nbd, ncurses, neon, netcat, netperf, netsnmp, |
| ntfsprogs, openssl, oprofile, pango, php, qt, quagga, samba, |
| setserial, sdl, sdl_mixer, sdl_sound, sdl_ttf, speech-tools, |
| sqlite, squashfs, swfdec, tftpd, thttpd, tn5250, tremor, |
| usbutils, webif, webkit, wireless_tools, xerces, |
| xkeyboard-config, xserver_xorg-server, xvkbd, zlib |
| |
| Removed packages: modutils, portage, rxvt |
| |
| Deprecated packages: dillo, libglib12, libgtk12, microwin, pcmcia |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #321: alsa-lib uses host include files for python which breaks ... |
| #361: linux kernel configuration choice works incorrectly |
| #387: Tremor not installed to toolchain |
| #401: new package: ffmpeg |
| #475: uImage target for U-boot failed generating |
| #543: ATK requires X11 on DirectFB target |
| #575: webkit: Buildroot Libtool Patch Fails |
| #583: build fails with external x86_64 toolchain |
| #729: sstrip creates corrupted headers |
| #829: Webkit r44552 needs libXt |
| #835: Package Dataflashboot-1.05 does not compile with buildroot... |
| #847: Compiling target-gcc v4.4 fails with "libc.so.0: cannot open... |
| #859: Add (head of) nptl branch to list of uClibc versions |
| #949: compile with debug info |
| #955: Grub fails to build with External Toolchain |
| #1051: Webkit doesn't compile (Linuxthreads new, x86) |
| #1213: Move .config into output directory |
| #1225: Buildroot fails to account for "nof" subdirectory (no float... |
| #1231: (sparc) Linux kernel fails to build |
| #1261: The getline() in output/build/linux-2.6.28/scripts/unifdef.c... |
| #1339: Busybox needs -fno-strict-aliasing to compile cleanly |
| #1393: neon config fails libxml/parser.h: libxml2 requires, but not ... |
| #1405: WebKit fails to build because pthread_getattr_np is not impl... |
| #1675: GMP Error during buildroot make process |
| #1741: external toolchain linking error |
| #1753: lmbench: convert to generic package infrastructure |
| #1771: Fakeroot and the target/generic/device_table.txt create bad... |
| #1807: LZMA 4.32.7, Required header file(s) are missing |
| #1813: xkeyboard-config fails to build because of intltool problem |
| #1879: Bump iptables to 1.4.8 |
| #1885: Add a bunch of lua modules |
| #1897: Bump libusb to 1.0.7 |
| #1903: Bump tn5250 to 0.17.4 and migrate to autotargets |
| #1909: netperf-2.4.5 fails to build because of undeclared SOCK_DCCP |
| #1927: Bump file to 5.03 and migrate to autotargets |
| #1933: Bump gawk to 3.1.8 and migrate to autotargets |
| #1945: PHP: add sqlite3 dependency when using external lib |
| #1951: Bump openssl to 0.9.8o |
| #1957: Bump sqlite to 3.6.23.1 |
| #1975: Package removal/deprecation |
| #1981: zlib: bump to 1.2.5 |
| #1987: intltool: Fix spelling mistake |
| #1993: Bump bash to 4.1.7(1) and migrate to autotargets |
| #1999: Typo in path checking |
| #2005: Bump dnsmasq to 2.55 and migrate to gentargets |
| #2035: ipsec-tools-0.7.2 fails to build with gcc-4.4.x |
| #2038: Bump ncurses to 5.7 |
| #2095: make gconfig: undefined reference to symbol 'dlsym@@GLIBC_2.2.5' |
| #2101: blackbox depends on locale support |
| #2119: Tries to build kernel, although disabled in config |
| #2125: libXfont build fail |
| #2143: buildroot compiler generates segfaulting statically linked exe.. |
| #2149: xterm build failure |
| #2155: Compression lzo don't set for ubifs |
| #2161: [SECURITY] Update libpng to 1.2.44 |
| #2167: Bump busybox to 1.17.0, convert to gentargets, drop 1.12, ... |
| #2181: pixman can't apply pixman-0.10.0-no-tests.patch |
| #2191: linux-fusion build fail |
| #2221: Qt does not compile (dependencies not taken into account?) |
| #2233: Atmel atstk target skeletons have /etc/mtab as a file, not ... |
| #2245: Netcat does not work due to incorrect assumptions about signed.. |
| #2251: directory output/build after make *_defconfig not found |
| #2257: Convert netsnmp package to autotargets |
| #2263: Bump samba to 3.3.13 |
| #2269: setserial causes make error |
| |
| 2010.05, Released May 30th, 2010: |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: coreutils, hal, libcap, |
| lockfile-progs, ncftp, xserver_xorg-server |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #1789: binutils fails to build for i386 |
| #1843: Fix libcap build failure |
| #1855: XORG Keyboard driver fails to compile |
| |
| 2010.05-rc3, Released May 27th, 2010: |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: aumix, atk, avahi, bmon, busybox, cairo, |
| cdrkit, dbus-glib, dbus-python, docker, enchant, fltk, gamin, |
| gettext, gmpc, gob2, grep, gstreamer, gst-plugins-bad, |
| gst-plugins-base, gvfs, hal, iconv, icu, iperf, libcgicc, |
| libdvdnav, libdvdread, libglade, libglib2, libgtk2, libidn, |
| libmms, libmpd, libpcap, libsoup, lmbench, lsof, ltrace, lvm2, |
| make, metacity, microperl, mtd-utils, mutt, nbd, netsnmp, |
| ntfsprogs, ntp, olsr, pango, pciutils, pcmanfm, php, |
| pkg-config, psmisc, qt, samba, shared-mime-info, squashfs, |
| squashfs3, sshfs, startup-notification, swfdec, sylpheed, |
| uemacs, util-linux, valgrind, vpnc, vsftpd, webkit, xstroke |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #75: arm buildroot "unrecognized option" error |
| #699: Buildroot fails to copy libstdc++ to target when using external... |
| #1693: NTP trys IPV6 even if not configured error: 'IPV6_MULTICAST... |
| #1729: alsamixergui fails to build |
| #1801: Avahi-autoipd doesn't create TARGET_DIR/var/lib |
| #1819: pciutils small bugs |
| #2065: Internal toolchain: bump gcc 4.3.x series to 4.3.5 |
| |
| 2010.05-rc2, Released May 11th, 2010: |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: busybox, customize, gawk, gnuchess, |
| hal, hostapd, less, libgcrypt, libnl, libxcb, linux-fusion, |
| ltp-testsuite, mplayer, netplug, pciutils, php, sed, |
| shared-mime-info usb_modeswitch, usbutils, vlc wpa_supplicant, |
| xapp_bdftopcf, xapp_mkfontdir, xdriver_xf86-video-openchrome, |
| xfont_encodings, xlib_libX11, xlib_libXfont, xlib_xtrans, |
| xproto_fontcacheproto, xproto_fontsproto, xvkbd |
| |
| Removed packages: vice |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #849: "customize" package copies files to wrong place in target tree |
| #985: Bump usb_modeswitch package to 1.1.0 |
| #1135: Package customize. Wrong copying |
| #1525: Package hal deletes a whole <target>/etc/rc.d directory |
| #1531: libxcb 1.5 build fails, due to missing xcbgen Python module |
| #1669: Busybox failed to compile when using an external toolchain |
| #1699: Fix usbutils dependencies and bump |
| #1705: Fix pciutils broken cross compiling |
| #1717: External toolchain fixes for hostapd & wpa_supplicant |
| |
| 2010.05-rc1, Released May 3rd, 2010: |
| |
| Cleaned up / restructured package menu. |
| |
| Toolchain: uClibc 0.9.30.3 / 0.9.31, older 0.9.30.x removed. |
| 2.6.33 kernel headers, binutils 2.20.1, GCC 4.4.4, |
| removed broken nios2 support, ppc e300cX/e500mc support, |
| improved external toolchain support, GDB 7.x support. |
| |
| X.org updated to 7.5. |
| |
| New packages: cdrkit, cramfs, genext2fs, genromfs, |
| libatomic_ops, librsync, libusb-compat, lmbench, netperf, |
| squashfs, squashfs3, squid |
| |
| Updated/fixed packages: alsa-utils, argus, autoconf, bison, |
| busybox, bzip2, directfb, dnsmasq, dosfstools, e2fsprogs, |
| eeprog, fakeroot, fbv, findutils, freetype, haserl, hostapd, |
| iperf, iptables, iw, less, libaio, libcgi, libcgicc, libdrm, |
| libgcrypt, libglib2, libid3tag, libmad, liboil, libosip2, |
| libpng, libraw1394, libsysfs, libxml2, libxslt, linux-fusion, |
| ltrace, lua, lzma, madplay, makedevs, matchbox, mdadm, |
| memstat, mesa3d, mtd-utils, nano, ncurses, openssl, patch, |
| pciutils, php, pixman, portage, pppd, pthread-stubs, python, |
| qt, radvd, samba, setserial, smartmontools, tar, tslib, |
| udpcast, usb_modeswith, vtun, wget, xdata_xcursor-themes, |
| xdriver_xf86-video-intel, xkeyboard-config, xlib_libX11, |
| xlib_libXaw, xlib_libXfont, xlib_libXfontcache, |
| xlib_libXxf86misc, xlib_libXtst, xlib_libpciaccess, |
| xproto_dri2proto, xproto_eviext, xproto_fontcacheproto, |
| xproto_xf86miscproto, xserver_xorg-server |
| |
| Removed packages: xapp_xtrap, xlib_libXTrap, xlib_libXevie, |
| xlib_libXxf86misc, xxproto_evieext, proto_trapproto, |
| xproto_xf86miscproto |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #513: Add new squid package |
| #661: lmbench: new package |
| #719: Add lua option to haserl |
| #800: [PATCH] iperf update to 2.0.4 |
| #803: [PATCH] lua - add shared library patch and config option for... |
| #805: [PATCH] mdadm - version update |
| #817: integrator926_defconfig uses unsupported uboot board name |
| #851: Add option to specify --sysroot value for external toolchain |
| #1093: Upgrade libusb to v1.0.3 and add new libusb-compat |
| package for compatibility with old packages that expect |
| the pre-1.0 API. |
| #1105: Add new netperf package |
| #1111: Bump wget to 1.12 and migrate to Makefile.autotools.in |
| #1117: Bump nano to 2.2.3 and migrate to Makefile.autotools.in |
| #1123: Bump less to 436 and migrate to Makefile.autotools.in |
| #1129: Bump memstat to 0.8 and migrate to Makefile.package.in |
| #1189: Wrong u-boot configuration name for integrator926 target |
| #1219: kernel headers not correctly installed into toolchain/staging |
| #1267: Wrong BR2_EXTRA_VERSION |
| #1273: BR2_INET_IPV6 does not enable IPv6 in pppd |
| #1303: Add librsync package |
| #1321: Busybox link fails due to lack of --sysroot option |
| #1327: mtd-utils compile failure due to lack of --sysroot in CFLAGS |
| #1345: Bump pppd to 2.4.5 and convert to Makefile.autotools.in |
| #1369: cannot build radvd (flex problem) |
| #1387: xlib_libX11-1.3.2 can't find libjpeg |
| #1411: [SECURITY] Update openssl package to 0.9.8n |
| #1417: Bump iptables to 1.4.7 |
| #1423: Bump e2fsprogs to 1.41.11 |
| #1429: [SECURITY] Update php to 5.2.13 |
| #1441: Add binutils 2.20.1 |
| #1447: Package installation on target with debug symbols is broken |
| #1459: Misc QA fixes |
| #1489: radvd update to 1.6 |
| #1513: Enable powerpc e300c2, e300c3 and e500mc optimization |
| #1537: dev entries not created anymore |
| #1555: Fix default uclibc-0.9.31 configuration |
| #1561: [SECURITY] Update samba to 3.3.12 |
| #1567: openssl0.9.8n fails to compile |
| #1573: Alsa-utils alsactl/init/* not installed to target |
| #1591: portmap fails to compile |
| #1615: Convert eeprog package to gentargets |
| #1645: Bump hostapd package to 0.7.2 |
| |
| 2010.02, Release February 26th, 2010: |
| |
| Fixes all over the tree. |
| |
| Updated/fixed packages: avahi, busybox, cramfs, ipsec-tools, libcgicc, |
| libgtk2, libraw1394, madplay, netsnmp, pango, squashfs, sylpheed, qt, |
| xfont_font-util |
| |
| Removed packages: hostap, openmotif, xpdf |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #165: openmotif does not build |
| #1147: Remove obsolete hostap package |
| #1183: make source fails to download gmp, mpfr and patches |
| |
| 2010.02-rc2, Released February 23th, 2010: |
| |
| Fixes all over the tree and new features. |
| |
| New packages: intltool |
| |
| Updated/fixed packages: ace_of_penguins, alsa-lib, alsa-utils, argus, |
| at, automake, ccache, dosfstools, e2fsprogs, flex, gob2, gmpc, |
| gst-plugins-good, imagemagick, iw, kexec, libeXosip, libgtk2, |
| libpcap, libpng, libsoup, libxcb, libxml-parser-perl, libxml2, |
| libxslt, lvm2, matchbox, mplayer, rsync, rubix, shared-mime-info, |
| tcl, webkit, xapp_mkfontscale, xfont_encodings, xfont_font-util, |
| xlib_libfontenc, xproto_trapproto, zlib |
| |
| Removed package: xboard |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #335: atk looks for the path to the gnome library on the host |
| #355: Please update WebKit - it doesn't compile! |
| #453: libglib2 autoreconf |
| #457: e2fsprogs link problem |
| #459: libgtk2 autoreconf |
| #469: build of libgtk2 for host incorrectly assumes that X.org ... |
| #671: Bash fails to build when building buildront on Ubuntu 9.04 |
| #711: WebKit host dependencies problems |
| #821: cp: illegal operation |
| #1039: Not compiled on ubuntu karmic |
| #1069: [PATCH] The AT91BOOTSTRAP makefile contains a typo |
| |
| 2010.02-rc1, Released February 9th, 2010: |
| |
| Fixes all over the tree and new features. |
| |
| Generalized autotools infrastructure to be usable for |
| non-autotools packages, see package/Makefile.package.in for |
| details. |
| |
| Cleaned up avr32 toolchain config, external source-based |
| toolchain support is gone. |
| |
| Dependency checks: Also check for makeinfo, only print output |
| on errors. |
| |
| Toolchain: uClibc 0.9.30.2, gcc 4.4.3 |
| |
| New packages: libcdaudio, libdvdnav, libdvdread, hostapd, ser2net, |
| tcpreplay |
| |
| Updated/fixed packages: alsa-lib, alsa-utils, at, autoconf, bash, |
| bind, binutils, bootutils, busybox, dbus, directfb, dnsmasq, |
| e2fsprogs, gstreamer, gperf, gst-plugins-bad, gvfs, fbdump, flex, |
| hal, iptables, iw, jpeg, kismet, libfuse, libglib2, liboil, libpcap, |
| libungif, libxml2, libxslt, lighttpd, mesa, mpg123, mtd-utils, nbd, |
| neon, netstat-nat, newt, openvpn, pcre, php, qt, rdesktop, readline, |
| rpm, sawman, sdl, sdl_ttf, sqlite, sshfs, tremor, u-boot, |
| usb_modeswitch, usbutils, webkit, wpa_supplicant, xfsprogs, zlib |
| |
| Removed package: asterisk, openswan |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #515: tcpreplay: new package |
| #553: Wrong DirectFB ps2mouse limitation |
| #559: mesa3d build fails |
| #679: Autoconf cannot find M4 |
| #739: New/updated hostapd package |
| #749: Bump usbutils package to version 0.86 |
| #751: Kernel 2.6 snapshot fetch fail |
| #753: Bump lighttpd package to 1.4.25 |
| #757: U-Boot: mkimage cannot be installed using external toolchain |
| #761: Add binutils 2.20 to toolchain options |
| #763: [SECURITY] Update pcre to 7.9 |
| #765: Add buildroot branding to gcc |
| #767: Bump iw package to 0.9.18 |
| #773: [SECURITY] Update bind to 9.5.2-P1 |
| #795: Minor edits to fix typos, grammar, spelling, usage in documen... |
| #813: Drop not very useful generic package selection options ... |
| #823: Editor backup files (~) is copied from the target_skeleton |
| #827: Bump mtd-utils package to version 1.2.0 |
| #841: Build error |
| #913: Bump iptables to 1.4.6 |
| #919: Bump usb_modeswitch package to 1.0.7 |
| #925: Bump wpa_supplicant package to 0.6.10 |
| #931: Bump kismet package to 2010-01-R1 |
| #937: Bump openvpn package to 2.1.1 |
| #943: Bump sqlite package to 3.6.22 |
| #961: Bump dnsmasq to 2.52 |
| #967: Bump netstat-nat to 1.4.10 |
| #973: Bump iw to 0.9.19 |
| #1003: DHCP options disabled with busybox-1.16.0 |
| #1009: [SECURITY] Bump php to 5.2.12 |
| #1015: [SECURITY] Bump bind to 9.5.1-P2 |
| #1027: Busybox flash commands conflict with those from mtd-utils |
| #1063: [SECURITY] Update lighttpd to 1.4.26 |
| |
| 2009.11, Released December 1st, 2009: |
| |
| Additional fixes and cleanups. |
| |
| Updated/fixed packages: alsamixergui, autoconf, coreutils, fltk, |
| microperl, ncurses, vim |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #707: Cant configure fltk-1.1.7. configure: error: Configure could ... |
| |
| 2009.11-rc2, Released November 29th, 2009: |
| |
| Additional fixes and cleanups. |
| |
| Updated/fixed packages: busybox, dbus, fltk, gvfs, ltrace |
| |
| 2009.11-rc1, Released November 23rd, 2009: |
| |
| Fixes all over the tree and new features. |
| |
| Cleaned up / Simplified build directory layout. Refer to |
| docs/buildroot.html#using for details. |
| |
| Target defconfig files moved to configs/ and listed in 'make help' |
| output. |
| |
| Fixed *clean targets. Now clean removes everything generated, |
| so you can do a fresh rebuild. Distclean furthermore removes |
| kbuild tools and .config, bringing the source tree back in a |
| pristine state. |
| |
| Toolchain: ARM cortex A8 support, GCC 4.4.2, sensible default |
| soft / hardfloat setting for architecture, ensure target-ldd |
| gets installed. |
| |
| New packages: divine, gvfs, libarchive, libmicrohttpd, |
| sdl_sound, swfdec, sysstat |
| |
| Updated/fixed packages: alsa-lib, alsamixergui, autoconf, bootutils, |
| busybox, gcc, directfb, dnsmasq, e2fsprogs, festival, gamin, gperf, |
| gqview, gstreamer, gst-plugins-bad, gst-plugins-base, gst-plugins-good, |
| imagemagick, ipkg, iptables, iw, kernel-headers, kismet, leafpad, |
| libelf, libevent, libglib2, libidn, liblockfile, libmad, libpcap, |
| libupnp, libuuid, libxml2, lighttpd, ltrace, lua, lzma, magiccube4d, |
| matchbox, mdadm, nbd, ncftp, ncurses, netkittelnet, netsnmp, |
| ng-spice-rework, ntfs-3g, openntp, openssl, pcmanfm, php, psmisc, |
| python, quagga, radvd, rpm, rsync, rubix, samba, sawman, sdl, sdl_image, |
| shared-mime-info, sfdisk, spawn-fcgi, speech-tools, sqlite, squashfs, |
| synergy, syslinux, sysklogd, target-binutils, tcpdump, torsmo, u-boot, |
| udpcast, util-linux, valgrind, vsftpd, wipe, wpa-supplicant, x11vnc, |
| xdata_xcursor-themes, xboard, xfsprogs, xstroke, zlib[5~ |
| |
| Removed package: mdnsresponder, mpatrol, gcc 3.4.6 + 4.0.4, vice |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #301: allow to install libsmbclient |
| #303: add gvfs package |
| #477: Add sdl_sound package |
| #487: Make kismet package sexier |
| #511: New package usb_modeswitch |
| #527: misc fixes for dnsmasq package |
| #565: libevent: Bump version and clean up makefile |
| #587: Use iptables multipurpose binaries and bump to 1.4.4 |
| #593: Missing early check for patch(1) |
| #597: (REOP) Selecting busybox in buildroot's config clobbers ar ... |
| #609: libmicrohttpd: New package |
| #615: python: Don't delete .py files unless asked |
| #617: netkit/inetd requires RPC and fails to build if RPC is disabled |
| #619: netkittelnet requires netkitbase to install, but there's no ... |
| #645: allow to build nbd-server with NBD package |
| #653: [SECURITY] Update php package to version 5.2.11 |
| #655: Update sqlite package to version 3.6.18 |
| #657: Bug in imagemagick-clean target |
| #663: Add option for NAND flash with 512B Page and 16 kB erasesize ... |
| #665: [PATCH] Samba package |
| #667: [PATCH] e2fsprogs |
| #683: SDL-dfb does not select directfb |
| #701: make install problem with unstripped binaries |
| #703: [SECURITY] Update openssl package to 0.9.8l |
| #705: Bump spawn-fcgi package to 1.6.3 |
| #709: Bump lighttpd package to 1.4.24 |
| #713: Migrate openntpd package to Makefile.autotools.in |
| #715: Bump libidn package to 1.15 and other fixes |
| #717: Bump dnsmasq to 2.51 and introduce new IDN option |
| #731: Bump iw package to 0.9.17 |
| |
| 2009.08, Released August 31th, 2009: |
| |
| Additional fixes and cleanups. |
| |
| Updated/fixed packages: ctorrent, saveconfig/getconfig, |
| sdl_net, util-linux. |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #529: util-linux doesn't find headers and include libs correctly |
| #557: Build ctorrent with SSL support if available |
| |
| 2009.08-rc3, Released August 26th, 2009: |
| |
| Additional fixes and cleanups. |
| |
| Updated/fixed packages: alsa-utils, berkeleydb, busybox, dbus, |
| directfb, enchant, kernel headers. |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #471: Allow directfb compilation with debug |
| #541: Removal of CVS directories in target filesystem broken |
| #547: berkeleydb: Update config.{sub, guess} |
| #549: enchant: Fix dependencies. |
| #569: Fix alsa-utils build for x86 on x86-64 |
| |
| 2009.08-rc2, Released August 6th, 2009: |
| |
| Additional fixes and new features. |
| |
| New packages: libuuid, gcc 4.3.4. |
| |
| Updated/fixed packages: busybox, classpath, gzip, ipsec-tools, |
| jamvm, libusb, microperl, neon, popt, sed, webkit. |
| |
| Fixed issue with 'make oldconfig' |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #525: sed broken with external toolchain |
| #537: Fix gzip build with recent glibc |
| |
| 2009.08-rc1, Released August 2nd, 2009: |
| |
| Fixes all over the tree and new features. |
| |
| Improvement of external toolchain support: |
| - Support for glibc toolchains. |
| - The toolchain configuration announced to Buildroot is |
| verified against the real toolchain configuration. |
| - Fixes, documentation. |
| |
| Cleanup X.org support: clarified configuration options, and |
| removed mandatory dependency on useless libraries such as |
| libXt or libXaw. |
| |
| New QT-based configurator, usable using 'make xconfig'. |
| |
| Support for the Xtensa architecture. |
| |
| Toolchain: GCC 4.4.1, 2.6.30 kernel headers, removed < 2.6.26 |
| headers. |
| |
| New packages: bmon, ctorrent, dosfstools, enchant, |
| gst-plugins-bad, iw, libmms, libnl, netstat-nat, ntfsprogs, |
| sdl_gfx, spawn-fcgi. |
| |
| Updated packages: bind, busybox, coreutils, sqlite, directfb, |
| expat, gamin, gnuconfig, haserl, ipsec-tools, classpath, |
| libcurl, libglib2, liblockfile, libpng, libsoup, libxml2, |
| lighttpd, ltp-testsuite, lvm2, matchbox, memstat, |
| gst-plugins-good, gstreamer, libogg, libvorbis, mplayer, |
| neon, openssl, pciutils, php, qt, ruby, sawman, webkit, |
| wpa-supplicant, xdriver_xf86-input-synaptics, |
| xdriver_xf86-video-intel, xlib_libXfont, xlib_libXft, |
| xlib_libXt, xproto_xproto, xserver-xorg, xutil_makedepend, |
| xutil_util-macros. |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #83: liblockfile fails to compile due to eaccess redefinition |
| #163: Xtensa architecture port |
| #171: xorg-server / kernel headers 2.6.26 - vm86.c compilation issue |
| #241: device mapper + lvm2: build together |
| #243: ctorrent: new package |
| #247: ntfsprogs: new package |
| #271: Library 'libgcc_s.so.1' not installed in search path |
| #287: New package libnl |
| #289: New package iw |
| #331: Update MPlayer to version 1.0rc2 |
| #333: Bump sqlite package to 3.6.15 |
| #349: update libsoup to version 2.26.2 |
| #357: New package netstat-nat |
| #359,#413: Upgrade openvpn to Makefile.autotools.in |
| #367: linux kernel compile error for arm926t |
| #369: Add SDL_gfx package |
| #373: Support for building gstreamer without libxml |
| #379: update DirectFB to version 1.4.0 |
| #383: gst-plugins-good: Allow soup plugin to be configured |
| #385: neon: Fix pkgconfig dependency |
| #387: Tremor not installed to toolchain |
| #389: New package bmon |
| #391: gstreamer: Bump version to 0.10.23 |
| #393: gst-plugins-base: Bump version to 0.10.23 |
| #395: gst-plugins-bad: New package |
| #403: Error while building iso9660 image |
| #409: Bump php package to 5.2.10 |
| #411: ipsec-tools: Bump version to 0.7.2 |
| #417: New package spawn-fcgi |
| #419: Bump lighttpd package to 1.4.23 |
| #421: toolchain: Clean up toolchain locale support menu |
| #427: webkit: Update to WebKit svn r44552 |
| #437: ltp-testsuite: Bump version to 20090630 |
| #451: Upgrade from unmaintained dosfstools-2.11 to dosfstools-3.0.3 |
| #467: DirectFB 1.4.1 |
| #473: memstat_0.5.tar.gz has install with -D and that fails "make" |
| #491: libxml2: Bump version to 0.7.3 |
| #495: Bump bind package to 9.5.1-P3 (security) |
| #497: OpenSSL RSA key generation hangs on x86_64 |
| #509: Bump sqlite package to 3.6.16 |
| #523: pciutils broken with external toolchain |
| #533: Update gamin to 0.1.10 to fix compilation |
| |
| 2009.05, Released June 1st, 2009: |
| |
| Fixes for dropbear & diffutils, bump linux-advanced 2.6.29.x |
| version and marked ubifsroot as broken. |
| |
| 2009.05-rc3, Released May 27th, 2009: |
| |
| Fixes for toolchain (gcc arm pr37436), stable kernel versions, |
| busybox, curl, libusb, readline, python and strace. |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #345: libcurl package needs a urandom fix |
| |
| 2009.05-rc2, Released May 19th, 2009: |
| |
| Fixes for toolchain (gcc w/softfloat on ppc, 3.4.6 buildfix |
| for newer hosts), stable kernel versions, busybox, cups, |
| dmraid, docker, mesa3d, rsync and updated defconfigs. |
| |
| xserver marked as broken on AVR32 and atngw100-expanded |
| config removed. |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #167: metacity does not build |
| #295: gamin installs python support even if python is disabled |
| #323: gen_matypes fails to execute during build of Mesa when us... |
| |
| 2009.05-rc1, Released May 5th, 2009: |
| |
| Fixes all over the tree, further conversion of packages to |
| Makefile.autotools.in and we now build host versions of |
| packages where needed for build time dependencies instead of |
| relying on the correct versions being available on the build |
| host. Ancient toolchain / busybox versions have furthermore |
| been removed as announced in the 2009.02 release notes. |
| |
| New packages: flac, gob2, lzop, taglib, wpa_supplicant |
| |
| Updated packages: avahi, bind, binutils, busybox, dbus, dbus-glib, |
| directfb, dnsmasq, freetype, gcc, gmp, gstreamer, iptables, kernel |
| headers, kexec, libglib2, libpng, libsndfile, lua, mpfr, ntfs-3g, |
| openssl, php, qtopia4, rsync, samba, sqlite, tar, uboot, uclibc, |
| util-linux, xorg7, xerces |
| |
| Issues resolved (http://bugs.uclibc.org): |
| |
| #5,#77,#141,#143: Convert php package to Makefile.autotools.in |
| and a ton of other improvements |
| #19: page.h missing by util-linux |
| #37: update libglib2 to version 2.18.4 |
| #61: tslib puts staging_dir into pkgconfig file |
| #69: tar refuses to build |
| #71,#175: ./wchar.h:41:12: error: empty filename in #include |
| #73: Bump openssl package to the latest version |
| #81: New package wpa_supplicant |
| #99: new package: flac |
| #101: update gstreamer packages |
| #105,#313: menuconfig segfaults on tinyx if wchar is not |
| selected |
| #107: convert libvorbis to Makefile.autotools.in |
| #109: Make pppd package avoid bsd err |
| #111: binutils 2.17 fails to build when texinfo >= 4.10 |
| #133: Modify ncurses5-config to get correct include path |
| #137: Bump php to version 5.2.9 |
| #139: Bump sqlite to 3.6.11 and convert to |
| Makefile.autotools.in |
| #145: Bump bind package to 9.5.1-P1 (security) |
| #147: buildroot toolchain fails to build w/binutils-2.19.1 |
| #151: openssl package trivial fixes |
| #161: vim fails on patching with errors in configure.patch |
| #169: blackbox-0.70.1 does not build |
| #177: xdriver_xf86-input-keyboard does not build |
| #179: Upgrade dropbear to Makefile.autotools.in |
| #181: Update to Xorg 7.4 |
| #187: ntfs-3g: could not build cross |
| #191: alsa-lib ARM binaries always built with EABI |
| #213: Bump wpa_supplicant package to version 0.6.9 |
| #217: Bump openssl package to 0.9.8k (security) |
| #219: Toolchain build fails on m4 |
| #225: m4 macros are out of place |
| #233: make ipv6 optional in iptables |
| #237: ncftp: convert to Makefile.autotools.in |
| #239: ntfs-3g: convert to Makefile.autotools.in |
| #245: lzop: new package |
| #271: Bump bind package to 9.5.1-P2 (security) |
| #277: Bump sqlite package to 3.6.16 |
| #279: update libglib2 to version 2.20.1 |
| #281: update DirectFB to version 1.2.8 |
| #283: add taglib |
| #285: compilation of samba fails if IPV6 support is missing |
| #293: update samba to version 3.3.3 |
| #299: add shared-mime-info package |
| #307: make openssl package respect build flags |
