| Acme Systems Arietta G25 |
| |
| Intro |
| ===== |
| |
| This default configuration will allow you to start experimenting with the |
| buildroot environment for the Arietta G25. With the current configuration |
| it will bring-up the board, and allow access through the serial console. |
| |
| You can find additional informations, tutorials and a very comprehensive |
| documentation on http://www.acmesystems.it/arietta. |
| |
| Build instructions |
| ================== |
| |
| To build an image for the Arietta G25 choose the configuration |
| corresponding to the Arietta variant. |
| |
| For 128MB RAM variant type: |
| |
| $ make acmesystems_arietta_g25_128mb_defconfig |
| |
| else for 256MB RAM variant type: |
| |
| $ make acmesystems_arietta_g25_256mb_defconfig |
| |
| To customize the configuration chosen type: |
| |
| $ make menuconfig |
| |
| When you are ready to start building Buildroot type: |
| |
| $ make |
| |
| How to write the microSD card |
| ============================= |
| |
| Once the build process is finished you will have an image called "sdcard.img" |
| in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an SD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Insert the microSD card into the Arietta slot and power it. |
| |
| The image just built is fairly basic and the only output |
| you will get is on serial console, please consider to use a DPI |
| cable (http://www.acmesystems.it/DPI) |
