blob: 323ae01283f4bfc0af445a2059dc0c5bec6d8162 [file] [log] [blame]
################################################################################
#
# qemu
#
################################################################################
QEMU_VERSION = 5.2.0
QEMU_SOURCE = qemu-$(QEMU_VERSION).tar.xz
QEMU_SITE = http://download.qemu.org
QEMU_LICENSE = GPL-2.0, LGPL-2.1, MIT, BSD-3-Clause, BSD-2-Clause, Others/BSD-1c
QEMU_LICENSE_FILES = COPYING COPYING.LIB
# NOTE: there is no top-level license file for non-(L)GPL licenses;
# the non-(L)GPL license texts are specified in the affected
# individual source files.
QEMU_CPE_ID_VENDOR = qemu
#-------------------------------------------------------------
# The build system is now partly based on Meson.
# However, building is still done with configure and make as in previous versions of QEMU.
# Target-qemu
QEMU_DEPENDENCIES = host-meson host-pkgconf libglib2 zlib pixman host-python3
# Need the LIBS variable because librt and libm are
# not automatically pulled. :-(
QEMU_LIBS = -lrt -lm
QEMU_OPTS =
QEMU_VARS = LIBTOOL=$(HOST_DIR)/bin/libtool
# If we want to specify only a subset of targets, we must still enable all
# of them, so that QEMU properly builds its list of default targets, from
# which it then checks if the specified sub-set is valid. That's what we
# do in the first part of the if-clause.
# Otherwise, if we do not want to pass a sub-set of targets, we then need
# to either enable or disable -user and/or -system emulation appropriately.
# That's what we do in the else-clause.
ifneq ($(call qstrip,$(BR2_PACKAGE_QEMU_CUSTOM_TARGETS)),)
QEMU_OPTS += --enable-system --enable-linux-user
QEMU_OPTS += --target-list="$(call qstrip,$(BR2_PACKAGE_QEMU_CUSTOM_TARGETS))"
else
ifeq ($(BR2_PACKAGE_QEMU_SYSTEM),y)
QEMU_OPTS += --enable-system
else
QEMU_OPTS += --disable-system
endif
ifeq ($(BR2_PACKAGE_QEMU_LINUX_USER),y)
QEMU_OPTS += --enable-linux-user
else
QEMU_OPTS += --disable-linux-user
endif
endif
ifeq ($(BR2_PACKAGE_QEMU_SLIRP),y)
QEMU_OPTS += --enable-slirp=system
QEMU_DEPENDENCIES += slirp
else
QEMU_OPTS += --disable-slirp
endif
ifeq ($(BR2_PACKAGE_QEMU_SDL),y)
QEMU_OPTS += --enable-sdl
QEMU_DEPENDENCIES += sdl2
QEMU_VARS += SDL2_CONFIG=$(BR2_STAGING_DIR)/usr/bin/sdl2-config
else
QEMU_OPTS += --disable-sdl
endif
ifeq ($(BR2_PACKAGE_QEMU_FDT),y)
QEMU_OPTS += --enable-fdt
QEMU_DEPENDENCIES += dtc
else
QEMU_OPTS += --disable-fdt
endif
ifeq ($(BR2_PACKAGE_QEMU_TOOLS),y)
QEMU_OPTS += --enable-tools
else
QEMU_OPTS += --disable-tools
endif
ifeq ($(BR2_PACKAGE_LIBSECCOMP),y)
QEMU_OPTS += --enable-seccomp
QEMU_DEPENDENCIES += libseccomp
else
QEMU_OPTS += --disable-seccomp
endif
ifeq ($(BR2_PACKAGE_LIBSSH),y)
QEMU_OPTS += --enable-libssh
QEMU_DEPENDENCIES += libssh
else
QEMU_OPTS += --disable-libssh
endif
ifeq ($(BR2_PACKAGE_LIBUSB),y)
QEMU_OPTS += --enable-libusb
QEMU_DEPENDENCIES += libusb
else
QEMU_OPTS += --disable-libusb
endif
ifeq ($(BR2_PACKAGE_LIBVNCSERVER),y)
QEMU_OPTS += \
--enable-vnc \
--disable-vnc-sasl
QEMU_DEPENDENCIES += libvncserver
ifeq ($(BR2_PACKAGE_LIBPNG),y)
QEMU_OPTS += --enable-vnc-png
QEMU_DEPENDENCIES += libpng
else
QEMU_OPTS += --disable-vnc-png
endif
ifeq ($(BR2_PACKAGE_JPEG),y)
QEMU_OPTS += --enable-vnc-jpeg
QEMU_DEPENDENCIES += jpeg
else
QEMU_OPTS += --disable-vnc-jpeg
endif
else
QEMU_OPTS += --disable-vnc
endif
ifeq ($(BR2_PACKAGE_NETTLE),y)
QEMU_OPTS += --enable-nettle
QEMU_DEPENDENCIES += nettle
else
QEMU_OPTS += --disable-nettle
endif
ifeq ($(BR2_PACKAGE_NUMACTL),y)
QEMU_OPTS += --enable-numa
QEMU_DEPENDENCIES += numactl
else
QEMU_OPTS += --disable-numa
endif
ifeq ($(BR2_PACKAGE_SPICE),y)
QEMU_OPTS += --enable-spice
QEMU_DEPENDENCIES += spice
else
QEMU_OPTS += --disable-spice
endif
ifeq ($(BR2_PACKAGE_USBREDIR),y)
QEMU_OPTS += --enable-usb-redir
QEMU_DEPENDENCIES += usbredir
else
QEMU_OPTS += --disable-usb-redir
endif
# Override CPP, as it expects to be able to call it like it'd
# call the compiler.
define QEMU_CONFIGURE_CMDS
unset TARGET_DIR; \
cd $(@D); \
LIBS='$(QEMU_LIBS)' \
$(TARGET_CONFIGURE_OPTS) \
$(TARGET_CONFIGURE_ARGS) \
CPP="$(TARGET_CC) -E" \
$(QEMU_VARS) \
./configure \
--prefix=/usr \
--cross-prefix=$(TARGET_CROSS) \
--audio-drv-list= \
--meson=$(HOST_DIR)/bin/meson \
--ninja=$(HOST_DIR)/bin/ninja \
--enable-kvm \
--enable-attr \
--enable-vhost-net \
--disable-bsd-user \
--disable-containers \
--disable-xen \
--disable-virtfs \
--disable-brlapi \
--disable-curses \
--disable-curl \
--disable-vde \
--disable-linux-aio \
--disable-linux-io-uring \
--disable-cap-ng \
--disable-docs \
--disable-rbd \
--disable-libiscsi \
--disable-strip \
--disable-sparse \
--disable-mpath \
--disable-sanitizers \
--disable-hvf \
--disable-whpx \
--disable-malloc-trim \
--disable-membarrier \
--disable-vhost-crypto \
--disable-libxml2 \
--disable-capstone \
--disable-git-update \
--disable-opengl \
--disable-vhost-user-blk-server \
--disable-virtiofsd \
$(QEMU_OPTS)
endef
define QEMU_BUILD_CMDS
unset TARGET_DIR; \
$(TARGET_MAKE_ENV) $(MAKE) -C $(@D)
endef
define QEMU_INSTALL_TARGET_CMDS
unset TARGET_DIR; \
$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) $(QEMU_MAKE_ENV) DESTDIR=$(TARGET_DIR) install
endef
$(eval $(generic-package))
#-------------------------------------------------------------
# Host-qemu
HOST_QEMU_DEPENDENCIES = host-meson host-pkgconf host-zlib host-libglib2 host-pixman host-python3
# BR ARCH qemu
# ------- ----
# arm arm
# armeb armeb
# i486 i386
# i586 i386
# i686 i386
# x86_64 x86_64
# m68k m68k
# microblaze microblaze
# mips mips
# mipsel mipsel
# mips64 mips64
# mips64el mips64el
# nios2 nios2
# or1k or1k
# powerpc ppc
# powerpc64 ppc64
# powerpc64le ppc64 (system) / ppc64le (usermode)
# sh2a not supported
# sh4 sh4
# sh4eb sh4eb
# sh4a sh4
# sh4aeb sh4eb
# sparc sparc
# sparc64 sparc64
# xtensa xtensa
HOST_QEMU_ARCH = $(ARCH)
ifeq ($(HOST_QEMU_ARCH),i486)
HOST_QEMU_ARCH = i386
endif
ifeq ($(HOST_QEMU_ARCH),i586)
HOST_QEMU_ARCH = i386
endif
ifeq ($(HOST_QEMU_ARCH),i686)
HOST_QEMU_ARCH = i386
endif
ifeq ($(HOST_QEMU_ARCH),powerpc)
HOST_QEMU_ARCH = ppc
endif
ifeq ($(HOST_QEMU_ARCH),powerpc64)
HOST_QEMU_ARCH = ppc64
endif
ifeq ($(HOST_QEMU_ARCH),powerpc64le)
HOST_QEMU_ARCH = ppc64le
HOST_QEMU_SYS_ARCH = ppc64
endif
ifeq ($(HOST_QEMU_ARCH),sh4a)
HOST_QEMU_ARCH = sh4
endif
ifeq ($(HOST_QEMU_ARCH),sh4aeb)
HOST_QEMU_ARCH = sh4eb
endif
HOST_QEMU_SYS_ARCH ?= $(HOST_QEMU_ARCH)
HOST_QEMU_CFLAGS = $(HOST_CFLAGS)
ifeq ($(BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE),y)
HOST_QEMU_TARGETS += $(HOST_QEMU_SYS_ARCH)-softmmu
HOST_QEMU_OPTS += --enable-system --enable-fdt
HOST_QEMU_CFLAGS += -I$(HOST_DIR)/include/libfdt
HOST_QEMU_DEPENDENCIES += host-dtc
else
HOST_QEMU_OPTS += --disable-system
endif
ifeq ($(BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE),y)
HOST_QEMU_TARGETS += $(HOST_QEMU_ARCH)-linux-user
HOST_QEMU_OPTS += --enable-linux-user
HOST_QEMU_HOST_SYSTEM_TYPE = $(shell uname -s)
ifneq ($(HOST_QEMU_HOST_SYSTEM_TYPE),Linux)
$(error "qemu-user can only be used on Linux hosts")
endif
else # BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE
HOST_QEMU_OPTS += --disable-linux-user
endif # BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE
ifeq ($(BR2_PACKAGE_HOST_QEMU_VDE2),y)
HOST_QEMU_OPTS += --enable-vde
HOST_QEMU_DEPENDENCIES += host-vde2
endif
# virtfs-proxy-helper is the only user of libcap-ng.
ifeq ($(BR2_PACKAGE_HOST_QEMU_VIRTFS),y)
HOST_QEMU_OPTS += --enable-virtfs --enable-cap-ng
HOST_QEMU_DEPENDENCIES += host-libcap-ng
else
HOST_QEMU_OPTS += --disable-virtfs --disable-cap-ng
endif
ifeq ($(BR2_PACKAGE_HOST_QEMU_USB),y)
HOST_QEMU_OPTS += --enable-libusb
HOST_QEMU_DEPENDENCIES += host-libusb
else
HOST_QEMU_OPTS += --disable-libusb
endif
# Override CPP, as it expects to be able to call it like it'd
# call the compiler.
define HOST_QEMU_CONFIGURE_CMDS
unset TARGET_DIR; \
cd $(@D); $(HOST_CONFIGURE_OPTS) CPP="$(HOSTCC) -E" \
./configure \
--target-list="$(HOST_QEMU_TARGETS)" \
--prefix="$(HOST_DIR)" \
--interp-prefix=$(STAGING_DIR) \
--cc="$(HOSTCC)" \
--host-cc="$(HOSTCC)" \
--extra-cflags="$(HOST_QEMU_CFLAGS)" \
--extra-ldflags="$(HOST_LDFLAGS)" \
--meson=$(HOST_DIR)/bin/meson \
--ninja=$(HOST_DIR)/bin/ninja \
--disable-bzip2 \
--disable-containers \
--disable-curl \
--disable-libssh \
--disable-linux-io-uring \
--disable-sdl \
--disable-vhost-user-blk-server \
--disable-virtiofsd \
--disable-vnc-jpeg \
--disable-vnc-png \
--disable-vnc-sasl \
$(HOST_QEMU_OPTS)
endef
define HOST_QEMU_BUILD_CMDS
unset TARGET_DIR; \
$(HOST_MAKE_ENV) $(MAKE) -C $(@D)
endef
define HOST_QEMU_INSTALL_CMDS
unset TARGET_DIR; \
$(HOST_MAKE_ENV) $(MAKE) -C $(@D) install
endef
$(eval $(host-generic-package))
# variable used by other packages
QEMU_USER = $(HOST_DIR)/bin/qemu-$(HOST_QEMU_ARCH)