| Cubietech Cubieboard1 |
| ===================== |
| |
| Cubieboard1 is the first generation Cubieboard from Cubietech. |
| |
| Cubietech: |
| http://www.cubietech.com/product-detail/cubieboard1 |
| |
| Linux Sunxi Wiki: |
| https://linux-sunxi.org/Cubietech_Cubieboard |
| |
| Building |
| -------- |
| |
| Configure and build with |
| |
| make cubieboard1_defconfig |
| make |
| |
| Flashing |
| -------- |
| |
| Flash the sdcard image onto a micro sdcard with |
| |
| dd if=output/images/sdcard.img of=/dev/sdX bs=1M conv=fsync |
| |
| Running |
| ------- |
| |
| Connect a 3V3 serial interface to the serial header on the top side of the board |
| (between the USB jacks and the A10 chip). Then provide power to the board. The |
| interface uses 115200 baud. |
