blob: 6a34c4239d1fc46030b3ccca68bee5d0c834cc25 [file] [log] [blame]
NanoPi M1
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the NanoPi M1. With the current configuration
it will bring-up the board, and allow access through the serial console.
How to build it
===============
Configure Buildroot:
$ make friendlyarm_nanopi_m1_defconfig
Compile everything and build the SD card image:
$ make
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX