| config BR2_PACKAGE_OPENOCD |
| bool "openocd" |
| select BR2_PACKAGE_JIMTCL |
| help |
| OpenOCD - Open On-Chip Debugger |
| |
| http://openocd.sourceforge.net/ |
| |
| if BR2_PACKAGE_OPENOCD |
| |
| comment "Adapters" |
| |
| config BR2_PACKAGE_OPENOCD_CMSIS_DAP |
| bool "CMSIS-DAP compliant debuggers" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb |
| depends on BR2_PACKAGE_HAS_UDEV # hidapi |
| depends on BR2_TOOLCHAIN_HAS_THREADS_NPTL # hidapi |
| select BR2_PACKAGE_LIBUSB |
| select BR2_PACKAGE_HIDAPI |
| help |
| Enable support for CMSIS-DAP compliant debuggers (i.e |
| Atmel/Microchip EDBG, etc.) |
| |
| config BR2_PACKAGE_OPENOCD_FTDI |
| bool "MPSSE mode of FTDI based devices" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb |
| select BR2_PACKAGE_LIBUSB |
| help |
| Enable building support for the MPSSE mode of FTDI |
| (FT2xxx/FT4xxx) based devices (default is auto) |
| |
| config BR2_PACKAGE_OPENOCD_STLINK |
| bool "ST-Link JTAG Programmer" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb |
| select BR2_PACKAGE_LIBUSB |
| help |
| Enable building support for the ST-Link JTAG |
| Programmer (default is auto) |
| |
| config BR2_PACKAGE_OPENOCD_TI_ICDI |
| bool "TI ICDI JTAG Programmer" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb |
| select BR2_PACKAGE_LIBUSB |
| help |
| Enable building support for the TI ICDI JTAG |
| Programmer (default is auto) |
| |
| config BR2_PACKAGE_OPENOCD_ULINK |
| bool "Keil ULINK JTAG Programmer" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb |
| select BR2_PACKAGE_LIBUSB |
| help |
| Enable building support for the Keil ULINK JTAG |
| Programmer (default is auto) |
| |
| config BR2_PACKAGE_OPENOCD_UBLASTER2 |
| bool "Altera USB-Blaster II Compatible" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb |
| select BR2_PACKAGE_LIBUSB |
| help |
| Enable building support for the Altera USB-Blaster |
| II Compatible (default is auto) |
| |
| config BR2_PACKAGE_OPENOCD_JLINK |
| bool "Segger J-Link JTAG Programmer" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb |
| select BR2_PACKAGE_LIBUSB |
| help |
| Segger J-Link JTAG Programmer and clone such as Atmel |
| SAM-ICE |
| |
| config BR2_PACKAGE_OPENOCD_OSDBM |
| bool "OSDBM JTAG (only) Programmer" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb |
| select BR2_PACKAGE_LIBUSB |
| help |
| Enable building support for the OSBDM (JTAG only) |
| Programmer (default is auto) |
| |
| config BR2_PACKAGE_OPENOCD_OPENDOUS |
| bool "eStick/opendous JTAG Programmer" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb |
| select BR2_PACKAGE_LIBUSB |
| help |
| Enable building support for the eStick/opendous JTAG |
| Programmer (default is auto) |
| |
| config BR2_PACKAGE_OPENOCD_AICE |
| bool "Andes JTAG Programmer" |
| depends on BR2_USE_MMU # use fork() |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb |
| select BR2_PACKAGE_LIBUSB |
| help |
| Enable building support for the Andes JTAG |
| Programmer (default is auto) |
| |
| config BR2_PACKAGE_OPENOCD_VSLLINK |
| bool "Versaloon-Link JTAG Programmer" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb |
| select BR2_PACKAGE_LIBUSB |
| select BR2_PACKAGE_LIBUSB_COMPAT |
| help |
| Enable building support for the Versaloon-Link JTAG |
| Programmer (default is auto) |
| |
| config BR2_PACKAGE_OPENOCD_USBPROG |
| bool "USBProg JTAG Programmer" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb |
| select BR2_PACKAGE_LIBUSB |
| select BR2_PACKAGE_LIBUSB_COMPAT |
| help |
| Enable building support for the USBProg JTAG |
| Programmer (default is auto) |
| |
| config BR2_PACKAGE_OPENOCD_RLINK |
| bool "Raisonance RLink JTAG Programmer" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb |
| select BR2_PACKAGE_LIBUSB |
| select BR2_PACKAGE_LIBUSB_COMPAT |
| help |
| Enable building support for the Raisonance RLink |
| JTAG Programmer (default is auto) |
| |
| config BR2_PACKAGE_OPENOCD_ARMEW |
| bool "Olimex ARM-JTAG-EW Programmer" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libusb-compat -> libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libusb-compat -> libusb |
| select BR2_PACKAGE_LIBUSB |
| select BR2_PACKAGE_LIBUSB_COMPAT |
| help |
| Enable building support for the Olimex ARM-JTAG-EW |
| Programmer (default is auto) |
| |
| config BR2_PACKAGE_OPENOCD_PARPORT |
| bool "pc parallel port driver" |
| help |
| Enable building the pc parallel port driver |
| |
| config BR2_PACKAGE_OPENOCD_VPI |
| bool "JTAG VPI" |
| help |
| Enable building support for JTAG VPI |
| |
| config BR2_PACKAGE_OPENOCD_UBLASTER |
| bool "Altera USB-Blaster" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb |
| select BR2_PACKAGE_LIBFTDI1 |
| help |
| Enable building support for the Altera USB-Blaster |
| using the libftdi driver, opensource alternate of |
| FTD2XX |
| |
| config BR2_PACKAGE_OPENOCD_AMTJT |
| bool "Amontec JTAG-Accelerator" |
| help |
| Enable building the Amontec JTAG-Accelerator driver |
| |
| if BR2_arm |
| |
| config BR2_PACKAGE_OPENOCD_EP93XX |
| bool "EP93xx based SBCs" |
| help |
| Enable building support for EP93xx based SBCs |
| |
| config BR2_PACKAGE_OPENOCD_AT91RM |
| bool "AT91RM9200 based SBCs" |
| help |
| Enable building support for AT91RM9200 based SBCs |
| |
| config BR2_PACKAGE_OPENOCD_BCM2835 |
| bool "bitbanging on BCM2835" |
| help |
| Enable building support for bitbanging on BCM2835 |
| (as found in Raspberry Pi) |
| |
| endif # BR2_arm |
| |
| config BR2_PACKAGE_OPENOCD_GW16012 |
| bool "Gateworks GW16012 JTAG Programmer" |
| help |
| Enable building support for the Gateworks GW16012 |
| JTAG Programmer |
| |
| config BR2_PACKAGE_OPENOCD_PRESTO |
| bool "ASIX Presto Programmer" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb |
| select BR2_PACKAGE_LIBFTDI1 |
| help |
| Enable building support for ASIX Presto Programmer |
| using the libftdi driver |
| |
| config BR2_PACKAGE_OPENOCD_OPENJTAG |
| bool "OpenJTAG Programmer" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libftdi -> libusb |
| depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 # libftdi -> libusb |
| select BR2_PACKAGE_LIBFTDI1 |
| select BR2_PACKAGE_LIBUSB |
| select BR2_PACKAGE_LIBUSB_COMPAT # needs usb.h |
| help |
| Enable building support for the OpenJTAG Programmer |
| with ftdi driver |
| |
| config BR2_PACKAGE_OPENOCD_BUSPIRATE |
| bool "Buspirate" |
| help |
| Enable building support for the Buspirate |
| |
| config BR2_PACKAGE_OPENOCD_SYSFS |
| bool "programming via sysfs gpios" |
| help |
| Enable building support for programming driven via |
| sysfs gpios. |
| |
| # Many adapters need libusb or libusb-compat, which require threads and |
| # gcc >= 4.9 but we don't want to duplicate this comment for all |
| # adapters that select libusb or libusb-compat. |
| comment "many openocd adapters needs a toolchain w/ threads, gcc >= 4.9" |
| depends on !BR2_TOOLCHAIN_HAS_THREADS || \ |
| !BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 |
| |
| endif # BR2_PACKAGE_OPENOCD |
