| menuconfig BR2_PACKAGE_WPA_SUPPLICANT |
| bool "wpa_supplicant" |
| depends on BR2_USE_MMU # fork() |
| help |
| WPA supplicant for secure wireless networks |
| |
| http://w1.fi/wpa_supplicant/ |
| |
| if BR2_PACKAGE_WPA_SUPPLICANT |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_NL80211 |
| bool "Enable nl80211 support" |
| default y |
| depends on BR2_TOOLCHAIN_HAS_THREADS # libnl |
| select BR2_PACKAGE_LIBNL |
| help |
| Enable support for nl80211. This is the current wireless |
| API for Linux, supported by all wireless drivers in vanilla |
| Linux, but may not be supported by some out-of-tree Linux |
| wireless drivers. wpa_supplicant will still fall back to |
| using the Wireless Extensions (wext) API with these drivers. |
| |
| If this option is disabled, then only the deprecated wext |
| API will be supported, with far less features. Linux may |
| supports using wext with modern drivers using a |
| compatibility layer, but it must be enabled in the kernel |
| configuration. |
| |
| comment "nl80211 support needs a toolchain w/ threads" |
| depends on !BR2_TOOLCHAIN_HAS_THREADS |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_WEXT |
| bool "Enable wext (deprecated)" |
| default y if !BR2_TOOLCHAIN_HAS_THREADS |
| help |
| Enable support for wext. This is the historic wireless API |
| for Linux, which is now deprecated and in maintenance-only in |
| the kernel. It may still be required by out-of-tree drivers. |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_WIRED |
| bool "Enable wired support" |
| select BR2_PACKAGE_WPA_SUPPLICANT_EAP |
| help |
| Include the "wired" driver, so the internal IEEE 802.1x |
| supplicant can be used with Ethernet. This also enables |
| support for MACSEC. |
| |
| comment "wpa_supplicant will be useless without at least one driver" |
| depends on !BR2_PACKAGE_WPA_SUPPLICANT_NL80211 && \ |
| !BR2_PACKAGE_WPA_SUPPLICANT_WEXT && \ |
| !BR2_PACKAGE_WPA_SUPPLICANT_WIRED |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_IBSS_RSN |
| bool "Enable IBSS RSN" |
| depends on BR2_PACKAGE_WPA_SUPPLICANT_NL80211 |
| help |
| Enable support for RSN/WPA2 in Ad-Hoc mode. |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT |
| bool "Enable AP mode" |
| depends on BR2_PACKAGE_WPA_SUPPLICANT_NL80211 |
| help |
| With this option enabled, wpa_supplicant can act as an |
| access point much like hostapd does with a limited feature |
| set. This links in parts of hostapd functionality into |
| wpa_supplicant, making it bigger but dispensing the need for |
| a separate hostapd binary in some applications hence being |
| smaller overall. It also enables support for Wi-Fi Direct. |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_WIFI_DISPLAY |
| bool "Enable Wi-Fi Display" |
| depends on BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT |
| help |
| Enable support for Wi-Fi Display |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING |
| bool "Enable mesh networking" |
| depends on BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT |
| select BR2_PACKAGE_OPENSSL |
| select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL |
| help |
| Enable support for open and secured mesh networking |
| (IEEE 802.11s) |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN |
| bool "Enable autoscan" |
| help |
| Enable support for the autoscan feature (allow periodic scan) |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_EAP |
| bool "Enable EAP" |
| help |
| Enable support for EAP, 802.1x/WPA-Enterprise and FILS. |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_HOTSPOT |
| bool "Enable HS20" |
| select BR2_PACKAGE_WPA_SUPPLICANT_EAP |
| help |
| Enable Hotspot 2.0 and IEEE 802.11u interworking |
| functionality. |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_DEBUG_SYSLOG |
| bool "Enable syslog support" |
| help |
| Enable support for sending debug messages to syslog. |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_WPS |
| bool "Enable WPS" |
| help |
| Enable support for Wi-Fi Protected Setup (WPS). |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_WPA3 |
| bool "Enable WPA3 support" |
| select BR2_PACKAGE_OPENSSL |
| select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL |
| help |
| Enable WPA3 support including OWE, SAE, DPP |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_CLI |
| bool "Install wpa_cli binary" |
| select BR2_PACKAGE_WPA_SUPPLICANT_CTRL_IFACE |
| help |
| Install wpa_cli command line utility |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_WPA_CLIENT_SO |
| bool "Install wpa_client shared library" |
| depends on !BR2_STATIC_LIBS |
| help |
| Install libwpa_client.so. |
| |
| comment "wpa_client library needs a toolchain w/ dynamic library" |
| depends on BR2_STATIC_LIBS |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE |
| bool "Install wpa_passphrase binary" |
| help |
| Install wpa_passphrase command line utility. |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_CTRL_IFACE |
| bool "Enable the Unix-socket control interface" |
| help |
| Enable support for the Unix-socket-based API. |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_DBUS |
| bool "Enable support for the DBus control interface" |
| depends on BR2_TOOLCHAIN_HAS_THREADS # dbus |
| select BR2_PACKAGE_DBUS |
| help |
| Enable support for the DBus control interface. |
| |
| comment "dbus support needs a toolchain w/ threads" |
| depends on !BR2_TOOLCHAIN_HAS_THREADS |
| |
| config BR2_PACKAGE_WPA_SUPPLICANT_DBUS_INTROSPECTION |
| bool "Introspection support" |
| depends on BR2_PACKAGE_WPA_SUPPLICANT_DBUS |
| help |
| Add introspection support for the DBus control interface. |
| |
| endif |
