| # Architecture |
| BR2_powerpc=y |
| BR2_powerpc_e300c3=y |
| |
| # Filesystem |
| # BR2_TARGET_ROOTFS_TAR is not set |
| BR2_TARGET_ROOTFS_JFFS2=y |
| BR2_TARGET_ROOTFS_JFFS2_CUSTOM=y |
| BR2_TARGET_ROOTFS_JFFS2_CUSTOM_PAGESIZE=0x200 |
| BR2_TARGET_ROOTFS_JFFS2_CUSTOM_EBSIZE=0x4000 |
| BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y |
| |
| # Linux headers same as kernel, a 4.5 series |
| BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y |
| |
| # Kernel |
| BR2_LINUX_KERNEL=y |
| BR2_LINUX_KERNEL_CUSTOM_VERSION=y |
| BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.5.3" |
| BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y |
| BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/mpc8315erdb/linux-4.5.config" |
| BR2_LINUX_KERNEL_UIMAGE=y |
| BR2_LINUX_KERNEL_DTS_SUPPORT=y |
| BR2_LINUX_KERNEL_INTREE_DTS_NAME="mpc8315erdb" |
| |
| # Serial port config |
| BR2_TARGET_GENERIC_GETTY=y |
| BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" |
| |
| # Bootloader |
| # Lock down binutils to <2.25 to avoid U-Boot build failure |
| BR2_BINUTILS_VERSION_2_24_X=y |
| BR2_TARGET_UBOOT=y |
| BR2_TARGET_UBOOT_BOARDNAME="MPC8315ERDB_NAND" |
| BR2_TARGET_UBOOT_CUSTOM_VERSION=y |
| BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2014.04" |
| BR2_TARGET_UBOOT_FORMAT_NAND_BIN=y |
