| BeagleBoard.org BeagleBone AI-64 Development Board |
| |
| Description |
| =========== |
| |
| This configuration will build a basic image for the BeagleBoard.org |
| BeagleBone AI-64. For more details about the board, visit: |
| |
| https://www.beagleboard.org/boards/beaglebone-ai-64 |
| |
| How to Build |
| ============ |
| |
| Select the default configuration for the target: |
| |
| $ make beagleboneai64_defconfig |
| |
| Optional: modify the configuration: |
| |
| $ make menuconfig |
| |
| Build: |
| |
| $ make |
| |
| To copy the resultimg output image file to an SD card use dd: |
| |
| $ dd if=output/images/sdcard.img of=/dev/sdX bs=1M |
| |
| How to Run |
| ========== |
| |
| Insert the SD card into the BeagleBone AI-64 board, and power it up |
| through the USB Type-C connector. The system should come up (make sure |
| to boot from the SD card not from the eMMC). You can use a USB to |
| serial adapter to connect to the connector labeled UART0 (J3) to |
| communicate with the board. |
| |
| https://docs.beagleboard.org/latest/boards/beaglebone/ai-64/02-quick-start.html |
