| Nanopi NEO |
| |
| Intro |
| ===== |
| |
| This default configuration will allow you to start experimenting with the |
| buildroot environment for the NanoPi NEO. With the current configuration |
| it will bring-up the board, and allow access through the serial console. |
| |
| FriendlyARM Nanopi NEO link: |
| https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO |
| |
| How to build |
| ============ |
| |
| $ make friendlyarm_nanopi_neo_defconfig |
| $ make |
| |
| Note: you will need access to the internet to download the required |
| sources. |
| |
| How to write the SD card |
| ======================== |
| |
| Once the build process is finished you will have an image called "sdcard.img" |
| in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an SD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| $ sudo sync |
| |
| Insert the micro SD card in your Nanopi NEO and power it up. The console |
| is on the debug TTL UART, 115200 8N1. |
| |
| Ethernet |
| ========== |
| |
| # udhcpc -i eth0 |
| |
| Enjoy! |
