| if BR2_TOOLCHAIN_BUILDROOT_UCLIBC |
| |
| comment "uClibc Options" |
| |
| choice |
| prompt "uClibc C library Version" |
| default BR2_UCLIBC_VERSION_0_9_33 |
| help |
| Select the version of uClibc you wish to use. |
| |
| config BR2_UCLIBC_VERSION_0_9_31 |
| bool "uClibc 0.9.31.x" |
| depends on BR2_avr32 |
| |
| config BR2_UCLIBC_VERSION_0_9_32 |
| bool "uClibc 0.9.32.x" |
| depends on !(BR2_arc || BR2_avr32 || BR2_sh || BR2_xtensa) |
| |
| config BR2_UCLIBC_VERSION_0_9_33 |
| bool "uClibc 0.9.33.x" |
| depends on !(BR2_arc || BR2_avr32 || BR2_xtensa) |
| |
| config BR2_UCLIBC_VERSION_0_9_33_ARC |
| bool "uClibc 0.9.33.x-arc" |
| depends on BR2_arc |
| |
| config BR2_UCLIBC_VERSION_SNAPSHOT |
| bool "daily snapshot" |
| |
| endchoice |
| |
| config BR2_USE_UCLIBC_SNAPSHOT |
| string "Date (yyyymmdd) of snapshot or 'snapshot' for latest" |
| default "snapshot" |
| depends on BR2_UCLIBC_VERSION_SNAPSHOT |
| help |
| Use latest snapshot or one from a specific date? |
| |
| config BR2_UCLIBC_VERSION_STRING |
| string |
| default 0.9.31.1 if BR2_UCLIBC_VERSION_0_9_31 |
| default 0.9.32.1 if BR2_UCLIBC_VERSION_0_9_32 |
| default 0.9.33.2 if BR2_UCLIBC_VERSION_0_9_33 |
| default 0.9.33-arc if BR2_UCLIBC_VERSION_0_9_33_ARC |
| default BR2_USE_UCLIBC_SNAPSHOT if BR2_UCLIBC_VERSION_SNAPSHOT |
| |
| config BR2_UCLIBC_CONFIG |
| string "uClibc configuration file to use?" |
| default "package/uclibc/uClibc-0.9.31.config" if BR2_UCLIBC_VERSION_0_9_31 |
| default "package/uclibc/uClibc-0.9.32.config" if BR2_UCLIBC_VERSION_0_9_32 |
| default "package/uclibc/uClibc-0.9.33.config" if BR2_UCLIBC_VERSION_0_9_33 |
| default "package/uclibc/uClibc-snapshot.config" if BR2_UCLIBC_VERSION_0_9_33_ARC |
| default "package/uclibc/uClibc-snapshot.config" if BR2_UCLIBC_VERSION_SNAPSHOT |
| help |
| Some people may wish to use their own modified uClibc configuration |
| file and will specify their config file location with this option. |
| See also docs/README in this package. |
| If unsure, use the default. |
| |
| config BR2_TOOLCHAIN_BUILDROOT_LARGEFILE |
| bool "Enable large file (files > 2 GB) support" |
| select BR2_LARGEFILE |
| help |
| Enable this option if you want your toolchain to support |
| files bigger than 2 GB. |
| |
| config BR2_TOOLCHAIN_BUILDROOT_INET_IPV6 |
| bool "Enable IPv6 support" |
| select BR2_INET_IPV6 |
| help |
| Enable this option if you want your toolchain to support |
| IPv6. |
| |
| config BR2_TOOLCHAIN_BUILDROOT_INET_RPC |
| bool "Enable RPC support" |
| select BR2_TOOLCHAIN_HAS_NATIVE_RPC |
| help |
| Enable this option if you want your toolchain to support |
| RPC (needed for NFS, for example). |
| |
| config BR2_TOOLCHAIN_BUILDROOT_WCHAR |
| bool "Enable WCHAR support" |
| select BR2_USE_WCHAR |
| help |
| Enable this option if you want your toolchain to support |
| wide characters (i.e characters longer than 8 bits, needed |
| for locale support). |
| |
| config BR2_TOOLCHAIN_BUILDROOT_LOCALE |
| bool "Enable toolchain locale/i18n support" |
| select BR2_TOOLCHAIN_BUILDROOT_WCHAR |
| select BR2_ENABLE_LOCALE |
| help |
| Enable this option if you want your toolchain to support |
| localization and internationalization. |
| |
| choice |
| prompt "Thread library implementation" |
| default BR2_PTHREADS_NATIVE if !(BR2_avr32 || BR2_xtensa) |
| default BR2_PTHREADS_OLD |
| help |
| Use this option to select the thread library implementation |
| that should be used in your toolchain. Not all thread |
| variants work with all versions of uClibc, the "linuxthreads |
| (stable/old)" may be a working fallback if you need |
| threading at all. |
| |
| config BR2_PTHREADS_NONE |
| bool "none" |
| |
| config BR2_PTHREADS |
| bool "linuxthreads" |
| depends on !BR2_bfin |
| depends on !BR2_xtensa |
| select BR2_TOOLCHAIN_HAS_THREADS |
| |
| config BR2_PTHREADS_OLD |
| bool "linuxthreads (stable/old)" |
| select BR2_TOOLCHAIN_HAS_THREADS |
| |
| config BR2_PTHREADS_NATIVE |
| bool "Native POSIX Threading (NPTL)" |
| select BR2_TOOLCHAIN_HAS_THREADS |
| depends on !BR2_arc |
| depends on !BR2_avr32 |
| depends on !BR2_bfin |
| depends on !BR2_xtensa |
| depends on !BR2_x86_i386 |
| endchoice |
| |
| config BR2_PTHREAD_DEBUG |
| bool "Thread library debugging" |
| depends on BR2_PTHREADS || BR2_PTHREADS_OLD || BR2_PTHREADS_NATIVE |
| select BR2_TOOLCHAIN_HAS_THREADS_DEBUG |
| help |
| Build the thread library with debugging enabled. |
| |
| config BR2_TOOLCHAIN_BUILDROOT_USE_SSP |
| bool "Enable stack protection support" |
| select BR2_TOOLCHAIN_HAS_SSP |
| help |
| Enable stack smashing protection support using GCCs |
| -fstack-protector-all option in uClibc. |
| |
| See http://www.linuxfromscratch.org/hints/downloads/files/ssp.txt |
| for details. |
| |
| config BR2_UCLIBC_INSTALL_UTILS |
| bool "Compile and install uClibc utilities" |
| depends on !BR2_bfin |
| default y |
| help |
| Enabling this option will compile and install the getconf, |
| ldconfig and ldd uClibc utilities for the target. |
| |
| You can save ~32 KiB in target space by disabling them since |
| they're normally not needed. |
| |
| config BR2_UCLIBC_INSTALL_TEST_SUITE |
| bool "Compile and install uClibc tests" |
| select BR2_PACKAGE_MAKE |
| help |
| Enabling this option will compile and install the uClibc test suite. |
| This is useful if you want to check if the uClibc library is working |
| for your architecture and/or help developing uClibc. |
| |
| The test suite will be installed into /root/uClibc directory. To run |
| the test suite enter the /root/uClibc/test directory and type |
| "make UCLIBC_ONLY=1 CC=/bin/true check". |
| |
| See the /root/uClibc/test/README for additional information. |
| |
| This is not needed at all for normal builds, so you can safely say no |
| if you do not plan to dig into your C library. |
| |
| # Mapping from the Buildroot architecture configuration options to the |
| # uClibc architecture names. |
| config BR2_UCLIBC_TARGET_ARCH |
| string |
| default arc if BR2_arcle || BR2_arceb |
| default arm if BR2_arm || BR2_armeb |
| default avr32 if BR2_avr32 |
| default bfin if BR2_bfin |
| default m68k if BR2_m68k |
| default mips if BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el |
| default powerpc if BR2_powerpc |
| default sh if BR2_sh |
| default sparc if BR2_sparc |
| default xtensa if BR2_xtensa |
| default i386 if BR2_i386 |
| default x86_64 if BR2_x86_64 |
| |
| # This is only useful for uClibc <= 0.9.32. It can be removed once |
| # Buildroot will support only uClibc >= 0.9.33 on ARM. |
| config BR2_UCLIBC_ARM_TYPE |
| string |
| depends on BR2_UCLIBC_TARGET_ARCH = "arm" |
| default GENERIC_ARM if BR2_fa526 |
| default ARM7TDMI if BR2_arm7tdmi |
| default ARM720T if BR2_arm720t |
| default ARM920T if BR2_arm920t |
| default ARM922T if BR2_arm922t |
| default ARM926T if BR2_arm926t |
| default ARM10T if BR2_arm10t |
| default ARM1136JF_S if BR2_arm1136jf_s |
| default ARM1176JZ_S if BR2_arm1176jz_s |
| default ARM1176JZF_S if BR2_arm1176jzf_s |
| default ARM_SA1100 if BR2_strongarm |
| default ARM_XSCALE if BR2_xscale |
| default ARM_IWMMXT if BR2_iwmmxt |
| default ARM_CORTEXA8 if BR2_cortex_a8 |
| default ARM_CORTEXA9 if BR2_cortex_a9 |
| |
| config BR2_UCLIBC_ARM_BX |
| bool |
| depends on BR2_UCLIBC_TARGET_ARCH = "arm" |
| default y if (BR2_ARM_CPU_HAS_THUMB || BR2_ARM_CPU_HAS_THUMB2) |
| |
| config BR2_UCLIBC_MIPS_ABI |
| string |
| depends on BR2_UCLIBC_TARGET_ARCH = "mips" |
| default O32 if BR2_MIPS_OABI32 |
| default N32 if BR2_MIPS_NABI32 |
| default N64 if BR2_MIPS_NABI64 |
| |
| config BR2_UCLIBC_MIPS_ISA |
| string |
| depends on BR2_UCLIBC_TARGET_ARCH = "mips" |
| default 1 if BR2_mips_1 |
| default 2 if BR2_mips_2 |
| default 3 if BR2_mips_3 |
| default 4 if BR2_mips_4 |
| default MIPS32 if BR2_mips_32 |
| default MIPS32R2 if BR2_mips_32r2 |
| default MIPS64 if BR2_mips_64 |
| |
| config BR2_UCLIBC_SH_TYPE |
| string |
| depends on BR2_UCLIBC_TARGET_ARCH = "sh" |
| default SHA2 if BR2_sh2 |
| default SH3 if BR2_sh3 || BR2_sh3eb |
| default SH4 if BR2_sh4 || BR2_sh4eb |
| |
| config BR2_UCLIBC_SPARC_TYPE |
| string |
| depends on BR2_UCLIBC_TARGET_ARCH = "sparc" |
| default V7 if BR2_sparc_v7 || BR2_sparc_sparchfleon || BR2_sparc_sparcsfleon |
| default V8 if BR2_sparc_v8 || BR2_sparc_sparchfleonv8 || BR2_sparc_sparcsfleonv8 |
| |
| config BR2_UCLIBC_POWERPC_TYPE |
| string |
| depends on BR2_UCLIBC_TARGET_ARCH = "powerpc" |
| default CLASSIC if !BR2_powerpc_8540 && !BR2_powerpc_8548 |
| default E500 if BR2_powerpc_8540 || BR2_powerpc_8548 |
| |
| config BR2_UCLIBC_X86_TYPE |
| string |
| depends on BR2_UCLIBC_TARGET_ARCH = "i386" |
| default 386 if BR2_x86_i386 |
| default 486 if BR2_x86_i486 |
| default 586 if BR2_x86_i586 |
| default 586MMX if BR2_x86_pentium_mmx |
| default 686 if BR2_x86_i686 || BR2_x86_pentiumpro |
| default PENTIUMII if BR2_x86_pentium2 |
| default PENTIUMIII if BR2_x86_pentium3 |
| default PENTIUM4 if BR2_x86_pentium4 || BR2_x86_pentium_m || \ |
| BR2_x86_nocona || BR2_x86_core2 |
| |
| endif # BR2_TOOLCHAIN_BUILDROOT_UCLIBC |
