| # |
| # Automatically generated make config: don't edit |
| # Thu Sep 27 19:19:26 2007 |
| # |
| BR2_HAVE_DOT_CONFIG=y |
| BR2_VERSION="0.10.0-svn" |
| # BR2_alpha is not set |
| BR2_arm=y |
| # BR2_armeb is not set |
| # BR2_avr32 is not set |
| # BR2_cris is not set |
| # BR2_ia64 is not set |
| # BR2_i386 is not set |
| # BR2_m68k is not set |
| # BR2_mips is not set |
| # BR2_mipsel is not set |
| # BR2_nios2 is not set |
| # BR2_powerpc is not set |
| # BR2_s390 is not set |
| # BR2_sh is not set |
| # BR2_sh64 is not set |
| # BR2_sparc is not set |
| # BR2_sparc64 is not set |
| # BR2_x86_64 is not set |
| # BR2_generic_arm is not set |
| # BR2_arm7tdmi is not set |
| # BR2_arm610 is not set |
| # BR2_arm710 is not set |
| # BR2_arm720t is not set |
| # BR2_arm920t is not set |
| # BR2_arm922t is not set |
| BR2_arm926t=y |
| # BR2_arm10t is not set |
| # BR2_arm1136jf_s is not set |
| # BR2_arm1176jz_s is not set |
| # BR2_arm1176jzf_s is not set |
| # BR2_sa110 is not set |
| # BR2_sa1100 is not set |
| # BR2_xscale is not set |
| # BR2_iwmmxt is not set |
| BR2_ARM_TYPE="ARM926T" |
| # BR2_ARM_OABI is not set |
| BR2_ARM_EABI=y |
| # BR2_x86_i386 is not set |
| # BR2_x86_i486 is not set |
| # BR2_x86_i586 is not set |
| # BR2_x86_i686 is not set |
| # BR2_x86_pentiumpro is not set |
| # BR2_x86_pentium_mmx is not set |
| # BR2_x86_pentium_m is not set |
| # BR2_x86_pentium2 is not set |
| # BR2_x86_pentium3 is not set |
| # BR2_x86_pentium4 is not set |
| # BR2_x86_prescott is not set |
| # BR2_x86_nocona is not set |
| # BR2_x86_core2 is not set |
| # BR2_x86_k6 is not set |
| # BR2_x86_k6_2 is not set |
| # BR2_x86_athlon is not set |
| # BR2_x86_athlon_4 is not set |
| # BR2_x86_opteron is not set |
| # BR2_x86_opteron_sse3 is not set |
| # BR2_x86_barcelona is not set |
| # BR2_x86_geode is not set |
| # BR2_x86_c3 is not set |
| # BR2_x86_winchip_c6 is not set |
| # BR2_x86_winchip2 is not set |
| BR2_ARCH="arm" |
| BR2_ENDIAN="LITTLE" |
| BR2_GCC_TARGET_TUNE="arm9tdmi" |
| |
| # |
| # Target options |
| # |
| |
| # |
| # Project Options |
| # |
| BR2_PROJECT="uclibc" |
| BR2_HOSTNAME="uclibc" |
| BR2_BANNER="Welcome to the Erik's uClibc development environment." |
| |
| # |
| # Preset Devices |
| # |
| BR2_PACKAGE_LINUX=y |
| BR2_TARGET_ARMLTD=y |
| |
| # |
| # Arm based Device Support |
| # |
| BR2_TARGET_ARMLTD_INTEGRATOR_926=y |
| # BR2_TARGET_ATMEL is not set |
| # BR2_TARGET_SHARP is not set |
| |
| # |
| # Generic System Support |
| # |
| # BR2_TARGET_GENERIC_ACCESS_POINT is not set |
| # BR2_TARGET_GENERIC_FIREWALL is not set |
| # BR2_TARGET_GENERIC_DEV_SYSTEM is not set |
| |
| # |
| # Build options |
| # |
| BR2_WGET="wget --passive-ftp -nd" |
| BR2_SVN_CO="svn co" |
| BR2_SVN_UP="svn up" |
| BR2_GIT="git clone" |
| BR2_ZCAT="gzip -d -c" |
| BR2_BZCAT="bzcat" |
| BR2_TAR_OPTIONS="" |
| BR2_DL_DIR="$(BASE_DIR)/dl" |
| |
| # |
| # Mirrors and Download locations |
| # |
| BR2_SOURCEFORGE_MIRROR="switch" |
| |
| # |
| # Atmel Mirrors |
| # |
| BR2_ATMEL_MIRROR="ftp://www.at91.com/pub/buildroot" |
| BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/" |
| BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir" |
| BR2_TOPDIR_PREFIX="" |
| BR2_TOPDIR_SUFFIX="" |
| BR2_GNU_BUILD_SUFFIX="pc-linux-gnu" |
| BR2_GNU_TARGET_SUFFIX="linux-uclibcgnueabi" |
| BR2_JLEVEL=1 |
| # BR2_PREFER_IMA is not set |
| # BR2_DEPRECATED is not set |
| BR2_STRIP_strip=y |
| # BR2_STRIP_sstrip is not set |
| # BR2_STRIP_none is not set |
| # BR2_PREFER_STATIC_LIB is not set |
| # BR2_HAVE_MANPAGES is not set |
| # BR2_HAVE_INFOPAGES is not set |
| BR2_UPDATE_CONFIG=y |
| |
| # |
| # Toolchain |
| # |
| BR2_TOOLCHAIN_BUILDROOT=y |
| # BR2_TOOLCHAIN_EXTERNAL is not set |
| # BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set |
| BR2_TOOLCHAIN_SOURCE=y |
| |
| # |
| # Kernel Header Options |
| # |
| # BR2_KERNEL_HEADERS_2_4_25 is not set |
| # BR2_KERNEL_HEADERS_2_4_27 is not set |
| # BR2_KERNEL_HEADERS_2_4_29 is not set |
| # BR2_KERNEL_HEADERS_2_4_31 is not set |
| # BR2_KERNEL_HEADERS_2_6_9 is not set |
| # BR2_KERNEL_HEADERS_2_6_11 is not set |
| # BR2_KERNEL_HEADERS_2_6_12 is not set |
| # BR2_KERNEL_HEADERS_2_6_20_4 is not set |
| # BR2_KERNEL_HEADERS_2_6_20 is not set |
| # BR2_KERNEL_HEADERS_2_6_21_5 is not set |
| # BR2_KERNEL_HEADERS_2_6_21 is not set |
| # BR2_KERNEL_HEADERS_2_6_22_1 is not set |
| BR2_KERNEL_HEADERS_2_6_22=y |
| # BR2_KERNEL_HEADERS_SNAP is not set |
| BR2_DEFAULT_KERNEL_HEADERS="2.6.22.8" |
| |
| # |
| # uClibc Options |
| # |
| # BR2_UCLIBC_VERSION_0_9_28_3 is not set |
| BR2_UCLIBC_VERSION_0_9_29=y |
| # BR2_UCLIBC_VERSION_SNAPSHOT is not set |
| BR2_UCLIBC_CONFIG="target/device/Arm/uClibc.integrator926.config" |
| # BR2_ENABLE_LOCALE is not set |
| # BR2_PTHREADS_NONE is not set |
| # BR2_PTHREADS is not set |
| BR2_PTHREADS_OLD=y |
| # BR2_PTHREADS_NATIVE is not set |
| # BR2_PTHREAD_DEBUG is not set |
| # BR2_UCLIBC_PROGRAM_INVOCATION is not set |
| |
| # |
| # Binutils Options |
| # |
| # BR2_BINUTILS_VERSION_2_17 is not set |
| # BR2_BINUTILS_VERSION_2_17_50_0_17 is not set |
| # BR2_BINUTILS_VERSION_2_18 is not set |
| BR2_BINUTILS_VERSION_2_18_50_0_1=y |
| BR2_BINUTILS_VERSION="2.18.50.0.1" |
| BR2_EXTRA_BINUTILS_CONFIG_OPTIONS="" |
| |
| # |
| # GCC Options |
| # |
| # BR2_GCC_VERSION_3_4_6 is not set |
| # BR2_GCC_VERSION_4_0_4 is not set |
| # BR2_GCC_VERSION_4_1_2 is not set |
| # BR2_GCC_VERSION_4_2_0 is not set |
| BR2_GCC_VERSION_4_2_1=y |
| # BR2_GCC_IS_SNAP is not set |
| BR2_GCC_SUPPORTS_SYSROOT=y |
| # BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE is not set |
| BR2_GCC_VERSION="4.2.1" |
| BR2_TOOLCHAIN_SYSROOT=y |
| # BR2_GCC_USE_SJLJ_EXCEPTIONS is not set |
| BR2_EXTRA_GCC_CONFIG_OPTIONS="" |
| # BR2_GCC_CROSS_CXX is not set |
| # BR2_GCC_CROSS_FORTRAN is not set |
| # BR2_INSTALL_LIBSTDCPP is not set |
| # BR2_INSTALL_OBJC is not set |
| # BR2_INSTALL_FORTRAN is not set |
| BR2_GCC_SHARED_LIBGCC=y |
| |
| # |
| # Ccache Options |
| # |
| # BR2_CCACHE is not set |
| |
| # |
| # Gdb Options |
| # |
| # BR2_PACKAGE_GDB is not set |
| # BR2_PACKAGE_GDB_SERVER is not set |
| # BR2_PACKAGE_GDB_HOST is not set |
| |
| # |
| # elf2flt |
| # |
| # BR2_ELF2FLT is not set |
| # BR2_MKLIBS is not set |
| |
| # |
| # Common Toolchain Options |
| # |
| # BR2_PACKAGE_SSTRIP_TARGET is not set |
| # BR2_PACKAGE_SSTRIP_HOST is not set |
| # BR2_ENABLE_MULTILIB is not set |
| # BR2_LARGEFILE is not set |
| # BR2_INET_IPV6 is not set |
| # BR2_INET_RPC is not set |
| # BR2_USE_WCHAR is not set |
| BR2_SOFT_FLOAT=y |
| BR2_TARGET_OPTIMIZATION="-Os -pipe -fwrapv" |
| BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y |
| |
| # |
| # Package Selection for the target |
| # |
| BR2_PACKAGE_BUSYBOX=y |
| # BR2_BUSYBOX_VERSION_1_2_2_1 is not set |
| # BR2_BUSYBOX_VERSION_1_6_1 is not set |
| # BR2_BUSYBOX_VERSION_1_7_0 is not set |
| BR2_BUSYBOX_VERSION_1_7_1=y |
| # BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set |
| BR2_BUSYBOX_VERSION="1.7.1" |
| BR2_PACKAGE_BUSYBOX_INSTALL_SYMLINKS=y |
| BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.6.0.config" |
| BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y |
| BR2_PACKAGE_BUSYBOX_SKELETON=y |
| |
| # |
| # The minimum needed to build a uClibc development system |
| # |
| # BR2_PACKAGE_BASH is not set |
| # BR2_PACKAGE_BZIP2 is not set |
| # BR2_PACKAGE_DIFFUTILS is not set |
| # BR2_PACKAGE_FLEX is not set |
| # BR2_PACKAGE_GCC_TARGET is not set |
| # BR2_PACKAGE_MAKE is not set |
| |
| # |
| # Other development stuff |
| # |
| # BR2_PACKAGE_AUTOCONF is not set |
| # BR2_PACKAGE_AUTOMAKE is not set |
| # BR2_PACKAGE_BISON is not set |
| # BR2_PACKAGE_CCACHE_TARGET is not set |
| # BR2_PACKAGE_DISTCC is not set |
| # BR2_PACKAGE_DMALLOC is not set |
| # BR2_PACKAGE_EXPAT is not set |
| # BR2_PACKAGE_FAKEROOT is not set |
| BR2_HOST_FAKEROOT=y |
| # BR2_PACKAGE_GETTEXT is not set |
| # BR2_PACKAGE_LIBINTL is not set |
| # BR2_PACKAGE_LIBGMP is not set |
| # BR2_PACKAGE_LIBMPFR is not set |
| # BR2_PACKAGE_LIBTOOL is not set |
| # BR2_PACKAGE_M4 is not set |
| # BR2_PACKAGE_PKGCONFIG is not set |
| # BR2_READLINE is not set |
| # BR2_PACKAGE_XERCES is not set |
| |
| # |
| # Other stuff |
| # |
| # BR2_PACKAGE_AT is not set |
| # BR2_PACKAGE_BERKELEYDB is not set |
| # BR2_PACKAGE_BSDIFF is not set |
| # BR2_PACKAGE_CUSTOMIZE is not set |
| # BR2_PACKAGE_DASH is not set |
| # BR2_PACKAGE_FILE is not set |
| # BR2_PACKAGE_KEXEC is not set |
| # BR2_PACKAGE_LIBDAEMON is not set |
| # BR2_PACKAGE_LIBELF is not set |
| # BR2_PACKAGE_LIBEVENT is not set |
| # BR2_PACKAGE_LIBFLOAT is not set |
| # BR2_PACKAGE_LIBGCRYPT is not set |
| # BR2_PACKAGE_LIBGPG_ERROR is not set |
| # BR2_PACKAGE_LIBLOCKFILE is not set |
| # BR2_PACKAGE_LIBSYSFS is not set |
| # BR2_PACKAGE_LIBXML2 is not set |
| # BR2_PACKAGE_LOCKFILE_PROGS is not set |
| # BR2_PACKAGE_LSOF is not set |
| # BR2_PACKAGE_LTP-TESTSUITE is not set |
| # BR2_PACKAGE_LTT is not set |
| # BR2_PACKAGE_PORTAGE is not set |
| # BR2_PACKAGE_SQLITE is not set |
| # BR2_PACKAGE_STRACE is not set |
| # BR2_PACKAGE_SUDO is not set |
| BR2_NETWORK_SUPPORT=y |
| |
| # |
| # Networking applications |
| # |
| # BR2_PACKAGE_ARGUS is not set |
| # BR2_PACKAGE_AVAHI is not set |
| # BR2_PACKAGE_BOA is not set |
| # BR2_PACKAGE_BIND is not set |
| # BR2_PACKAGE_BRIDGE is not set |
| # BR2_PACKAGE_CURL is not set |
| # BR2_PACKAGE_LIBCURL is not set |
| # BR2_PACKAGE_DNSMASQ is not set |
| # BR2_PACKAGE_DROPBEAR is not set |
| # BR2_PACKAGE_ETHTOOL is not set |
| # BR2_PACKAGE_HASERL is not set |
| # BR2_PACKAGE_IRDA_UTILS is not set |
| # BR2_PACKAGE_IPERF is not set |
| # BR2_PACKAGE_IPROUTE2 is not set |
| # BR2_PACKAGE_IPSEC_TOOLS is not set |
| # BR2_PACKAGE_IPTABLES is not set |
| # BR2_PACKAGE_L2TP is not set |
| # BR2_PACKAGE_LIBCGI is not set |
| # BR2_PACKAGE_LIBCGICC is not set |
| BR2_PACKAGE_LIBPCAP=y |
| # BR2_PACKAGE_LINKS is not set |
| # BR2_PACKAGE_LRZSZ is not set |
| # BR2_PACKAGE_MDNSRESPONDER is not set |
| # BR2_PACKAGE_MROUTED is not set |
| # BR2_PACKAGE_MUTT is not set |
| # BR2_PACKAGE_NBD is not set |
| # BR2_PACKAGE_NCFTP is not set |
| # BR2_PACKAGE_NETKITBASE is not set |
| # BR2_PACKAGE_NETKITTELNET is not set |
| # BR2_PACKAGE_NETPLUG is not set |
| # BR2_PACKAGE_NETSNMP is not set |
| # BR2_PACKAGE_NFS_UTILS is not set |
| # BR2_PACKAGE_NTP is not set |
| # BR2_PACKAGE_OLSR is not set |
| # BR2_PACKAGE_OPENNTPD is not set |
| BR2_PACKAGE_OPENSSH=y |
| BR2_PACKAGE_OPENSSL=y |
| # BR2_PACKAGE_OPENSSL_TARGET_HEADERS is not set |
| # BR2_PACKAGE_OPENVPN is not set |
| # BR2_PACKAGE_OPENSWAN is not set |
| # BR2_PACKAGE_PORTMAP is not set |
| # BR2_PACKAGE_PPPD is not set |
| # BR2_PACKAGE_RP_PPPOE is not set |
| # BR2_PACKAGE_PPTP_LINUX is not set |
| # BR2_PACKAGE_PROFTPD is not set |
| # BR2_PACKAGE_QUAGGA is not set |
| |
| # |
| # quagga suite |
| # |
| # BR2_PACKAGE_QUAGGA_ZEBRA is not set |
| # BR2_PACKAGE_QUAGGA_BGPD is not set |
| # BR2_PACKAGE_QUAGGA_RIPD is not set |
| # BR2_PACKAGE_QUAGGA_RIPNGD is not set |
| # BR2_PACKAGE_QUAGGA_OSPFD is not set |
| # BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set |
| # BR2_PACKAGE_QUAGGA_ISISD is not set |
| # BR2_PACKAGE_RSYNC is not set |
| # BR2_PACKAGE_SAMBA is not set |
| # BR2_PACKAGE_SOCAT is not set |
| # BR2_PACKAGE_STUNNEL is not set |
| BR2_PACKAGE_TCPDUMP=y |
| # BR2_PACKAGE_TCPDUMP_SMB is not set |
| # BR2_PACKAGE_DHCPDUMP is not set |
| # BR2_PACKAGE_TFTPD is not set |
| # BR2_PACKAGE_TN5250 is not set |
| # BR2_PACKAGE_TTCP is not set |
| # BR2_PACKAGE_VPNC is not set |
| # BR2_PACKAGE_VTUN is not set |
| # BR2_PACKAGE_WIRELESS_TOOLS is not set |
| BR2_BLOCKDEV_SUPPORT=y |
| # BR2_PACKAGE_DBUS is not set |
| # BR2_PACKAGE_DM is not set |
| # BR2_PACKAGE_DMRAID is not set |
| # BR2_PACKAGE_E2FSPROGS is not set |
| # BR2_PACKAGE_GADGETFS_TEST is not set |
| # BR2_PACKAGE_HAL is not set |
| # BR2_PACKAGE_HWDATA is not set |
| # BR2_PACKAGE_IOSTAT is not set |
| # BR2_PACKAGE_LIBAIO is not set |
| # BR2_PACKAGE_LIBRAW1394 is not set |
| # BR2_PACKAGE_LIBUSB is not set |
| # BR2_PACKAGE_LM_SENSORS is not set |
| # BR2_PACKAGE_LVM2 is not set |
| # BR2_PACKAGE_MDADM is not set |
| # BR2_PACKAGE_MEMTESTER is not set |
| # BR2_PACKAGE_MKDOSFS is not set |
| # BR2_PACKAGE_MTD is not set |
| BR2_PACKAGE_PCIUTILS=y |
| # BR2_PACKAGE_PCMCIA is not set |
| # BR2_PACKAGE_RAIDTOOLS is not set |
| # BR2_PACKAGE_SETSERIAL is not set |
| # BR2_PACKAGE_SMARTMONTOOLS is not set |
| # BR2_PACKAGE_USBMOUNT is not set |
| # BR2_PACKAGE_USBUTILS is not set |
| # BR2_PACKAGE_WIPE is not set |
| # BR2_PACKAGE_XFSPROGS is not set |
| BR2_AUDIO_SUPPORT=y |
| # BR2_PACKAGE_ALSA_LIB is not set |
| # BR2_PACKAGE_ASTERISK is not set |
| # BR2_PACKAGE_AUMIX is not set |
| # BR2_PACKAGE_LIBMAD is not set |
| # BR2_PACKAGE_LIBSNDFILE is not set |
| # BR2_PACKAGE_LIBVORBIS is not set |
| # BR2_PACKAGE_MADPLAY is not set |
| # BR2_PACKAGE_MPG123 is not set |
| BR2_GRAPHIC_SUPPORT=y |
| |
| # |
| # text rendering libraries |
| # |
| # BR2_PACKAGE_NCURSES is not set |
| # BR2_PACKAGE_NEWT is not set |
| # BR2_PACKAGE_SLANG is not set |
| |
| # |
| # text rendering applications |
| # |
| # BR2_PACKAGE_DIALOG is not set |
| |
| # |
| # graphic libraries |
| # |
| # BR2_PACKAGE_DIRECTFB is not set |
| # BR2_PACKAGE_IMAGEMAGICK is not set |
| # BR2_PACKAGE_JPEG is not set |
| # BR2_PACKAGE_LIBPNG is not set |
| # BR2_PACKAGE_LIBUNGIF is not set |
| # BR2_PACKAGE_SDL is not set |
| # BR2_PACKAGE_TIFF is not set |
| |
| # |
| # busybox graphic applications |
| # |
| |
| # |
| # --> (May be broken in busybox) |
| # |
| # BR2_PACKAGE_FBV is not set |
| # BR2_PACKAGE_FBSET is not set |
| |
| # |
| # other GUIs |
| # |
| # BR2_PACKAGE_QTE is not set |
| # BR2_PACKAGE_QTOPIA4 is not set |
| BR2_PACKAGE_XSERVER_none=y |
| # BR2_PACKAGE_XSERVER_x11r7 is not set |
| # BR2_PACKAGE_XSERVER_xorg is not set |
| # BR2_PACKAGE_XSERVER_tinyx is not set |
| BR2_X11_PREFIX="/usr" |
| |
| # |
| # X libraries and helper libraries |
| # |
| # BR2_PACKAGE_ATK is not set |
| # BR2_PACKAGE_PANGO is not set |
| # BR2_PACKAGE_LIBDRM is not set |
| # BR2_PACKAGE_LIBGLIB12 is not set |
| # BR2_PACKAGE_LIBGLIB2 is not set |
| # BR2_PACKAGE_FONTCONFIG is not set |
| # BR2_PACKAGE_FREETYPE is not set |
| # BR2_PACKAGE_TSLIB is not set |
| |
| # |
| # X Window managers |
| # |
| # BR2_PACKAGE_MATCHBOX is not set |
| |
| # |
| # X applications |
| # |
| |
| # |
| # Video libraries/codecs and applications |
| # |
| # BR2_PACKAGE_MPLAYER is not set |
| BR2_COMPRESSOR_SUPPORT=y |
| # BR2_PACKAGE_LZO is not set |
| # BR2_PACKAGE_LZMA_TARGET is not set |
| # BR2_PACKAGE_LZMA_HOST is not set |
| BR2_PACKAGE_ZLIB=y |
| # BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set |
| BR2_SCRIPTING_SUPPORT=y |
| # BR2_PACKAGE_MICROPERL is not set |
| BR2_PACKAGE_MICROPERL_MODULES="warnings.pm warnings/register.pm strict.pm constant.pm vars.pm Exporter.pm Exporter/Heavy.pm Carp.pm Getopt/Long.pm" |
| # BR2_PACKAGE_PYTHON is not set |
| # BR2_PACKAGE_RUBY is not set |
| # BR2_PACKAGE_TCL is not set |
| # BR2_PACKAGE_PHP is not set |
| |
| # |
| # Target filesystem options |
| # |
| |
| # |
| # filesystem for target device |
| # |
| # BR2_TARGET_ROOTFS_CRAMFS is not set |
| # BR2_TARGET_ROOTFS_CLOOP is not set |
| BR2_TARGET_ROOTFS_EXT2=y |
| BR2_TARGET_ROOTFS_EXT2_BLOCKS=0 |
| BR2_TARGET_ROOTFS_EXT2_INODES=0 |
| BR2_TARGET_ROOTFS_EXT2_RESBLKS=0 |
| BR2_TARGET_ROOTFS_EXT2_SQUASH=y |
| BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2" |
| BR2_TARGET_ROOTFS_EXT2_NONE=y |
| # BR2_TARGET_ROOTFS_EXT2_GZIP is not set |
| # BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set |
| # BR2_TARGET_ROOTFS_EXT2_LZMA is not set |
| BR2_TARGET_ROOTFS_EXT2_COPYTO="" |
| # BR2_TARGET_ROOTFS_JFFS2 is not set |
| # BR2_TARGET_ROOTFS_SQUASHFS is not set |
| BR2_TARGET_ROOTFS_TAR=y |
| BR2_TARGET_ROOTFS_TAR_NONE=y |
| # BR2_TARGET_ROOTFS_TAR_GZIP is not set |
| # BR2_TARGET_ROOTFS_TAR_BZIP2 is not set |
| # BR2_TARGET_ROOTFS_TAR_LZMA is not set |
| BR2_TARGET_ROOTFS_TAR_OPTIONS="" |
| # BR2_TARGET_ROOTFS_CPIO is not set |
| # BR2_TARGET_ROOTFS_CPIO_NONE is not set |
| # BR2_TARGET_ROOTFS_CPIO_GZIP is not set |
| # BR2_TARGET_ROOTFS_CPIO_BZIP2 is not set |
| # BR2_TARGET_ROOTFS_CPIO_LZMA is not set |
| # BR2_TARGET_ROOTFS_INITRAMFS is not set |
| |
| # |
| # bootloader for target device |
| # |
| |
| # |
| # Kernel |
| # |
| # BR2_KERNEL_none is not set |
| BR2_KERNEL_LINUX=y |
| # BR2_KERNEL_HURD is not set |
| BR2_PACKAGE_LINUX_KCONFIG="target/device/Arm/linux26.integrator926.config" |
| BR2_PACKAGE_LINUX_FORMAT="zImage" |