| ################################################################################ |
| # |
| # toolchain-external |
| # |
| ################################################################################ |
| |
| # |
| # This package implements the support for external toolchains, i.e |
| # toolchains that are available pre-built, ready to use. Such toolchain |
| # may either be readily available on the Web (Linaro, Sourcery |
| # CodeBench, from processor vendors) or may be built with tools like |
| # Crosstool-NG or Buildroot itself. So far, we have tested this |
| # with: |
| # |
| # * Toolchains generated by Crosstool-NG |
| # * Toolchains generated by Buildroot |
| # * Toolchains provided by Linaro for the ARM and AArch64 |
| # architectures |
| # * Sourcery CodeBench toolchains (from Mentor Graphics) for the ARM, |
| # MIPS, PowerPC, x86, x86_64 and NIOS 2 architectures. For the MIPS |
| # toolchain, the -muclibc variant isn't supported yet, only the |
| # default glibc-based variant is. |
| # * Analog Devices toolchains for the Blackfin architecture |
| # * Xilinx toolchains for the Microblaze architecture |
| # * Synopsys DesignWare toolchains for ARC cores |
| # |
| # The basic principle is the following |
| # |
| # 1. If the toolchain is not pre-installed, download and extract it |
| # in $(TOOLCHAIN_EXTERNAL_INSTALL_DIR). Otherwise, |
| # $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) points to were the toolchain has |
| # already been installed by the user. |
| # |
| # 2. For all external toolchains, perform some checks on the |
| # conformity between the toolchain configuration described in the |
| # Buildroot menuconfig system, and the real configuration of the |
| # external toolchain. This is for example important to make sure that |
| # the Buildroot configuration system knows whether the toolchain |
| # supports RPC, IPv6, locales, large files, etc. Unfortunately, these |
| # things cannot be detected automatically, since the value of these |
| # options (such as BR2_TOOLCHAIN_HAS_NATIVE_RPC) are needed at |
| # configuration time because these options are used as dependencies |
| # for other options. And at configuration time, we are not able to |
| # retrieve the external toolchain configuration. |
| # |
| # 3. Copy the libraries needed at runtime to the target directory, |
| # $(TARGET_DIR). Obviously, things such as the C library, the dynamic |
| # loader and a few other utility libraries are needed if dynamic |
| # applications are to be executed on the target system. |
| # |
| # 4. Copy the libraries and headers to the staging directory. This |
| # will allow all further calls to gcc to be made using --sysroot |
| # $(STAGING_DIR), which greatly simplifies the compilation of the |
| # packages when using external toolchains. So in the end, only the |
| # cross-compiler binaries remains external, all libraries and headers |
| # are imported into the Buildroot tree. |
| # |
| # 5. Build a toolchain wrapper which executes the external toolchain |
| # with a number of arguments (sysroot/march/mtune/..) hardcoded, |
| # so we're sure the correct configuration is always used and the |
| # toolchain behaves similar to an internal toolchain. |
| # This toolchain wrapper and symlinks are installed into |
| # $(HOST_DIR)/usr/bin like for the internal toolchains, and the rest |
| # of Buildroot is handled identical for the 2 toolchain types. |
| |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC),y) |
| LIB_EXTERNAL_LIBS += libatomic.so.* libc.so.* libcrypt.so.* libdl.so.* libgcc_s.so.* libm.so.* libnsl.so.* libresolv.so.* librt.so.* libutil.so.* |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_ARM_EABIHF),yy) |
| LIB_EXTERNAL_LIBS += ld-linux-armhf.so.* |
| else |
| LIB_EXTERNAL_LIBS += ld*.so.* |
| endif |
| ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y) |
| LIB_EXTERNAL_LIBS += libpthread.so.* |
| ifneq ($(BR2_PACKAGE_GDB)$(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY),) |
| LIB_EXTERNAL_LIBS += libthread_db.so.* |
| endif # gdbserver |
| endif # ! no threads |
| endif |
| |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC),y) |
| LIB_EXTERNAL_LIBS += libnss_files.so.* libnss_dns.so.* |
| endif |
| |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y) |
| LIB_EXTERNAL_LIBS += libc.so libgcc_s.so.* |
| endif |
| |
| ifeq ($(BR2_INSTALL_LIBSTDCPP),y) |
| USR_LIB_EXTERNAL_LIBS += libstdc++.so.* |
| endif |
| |
| LIB_EXTERNAL_LIBS += $(call qstrip,$(BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS)) |
| |
| # Details about sysroot directory selection. |
| # |
| # To find the sysroot directory, we use the trick of looking for the |
| # 'libc.a' file with the -print-file-name gcc option, and then |
| # mangling the path to find the base directory of the sysroot. |
| # |
| # Note that we do not use the -print-sysroot option, because it is |
| # only available since gcc 4.4.x, and we only recently dropped support |
| # for 4.2.x and 4.3.x. |
| # |
| # When doing this, we don't pass any option to gcc that could select a |
| # multilib variant (such as -march) as we want the "main" sysroot, |
| # which contains all variants of the C library in the case of multilib |
| # toolchains. We use the TARGET_CC_NO_SYSROOT variable, which is the |
| # path of the cross-compiler, without the --sysroot=$(STAGING_DIR), |
| # since what we want to find is the location of the original toolchain |
| # sysroot. This "main" sysroot directory is stored in SYSROOT_DIR. |
| # |
| # Then, multilib toolchains are a little bit more complicated, since |
| # they in fact have multiple sysroots, one for each variant supported |
| # by the toolchain. So we need to find the particular sysroot we're |
| # interested in. |
| # |
| # To do so, we ask the compiler where its sysroot is by passing all |
| # flags (including -march and al.), except the --sysroot flag since we |
| # want to the compiler to tell us where its original sysroot |
| # is. ARCH_SUBDIR will contain the subdirectory, in the main |
| # SYSROOT_DIR, that corresponds to the selected architecture |
| # variant. ARCH_SYSROOT_DIR will contain the full path to this |
| # location. |
| # |
| # One might wonder why we don't just bother with ARCH_SYSROOT_DIR. The |
| # fact is that in multilib toolchains, the header files are often only |
| # present in the main sysroot, and only the libraries are available in |
| # each variant-specific sysroot directory. |
| |
| |
| TOOLCHAIN_EXTERNAL_PREFIX = $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PREFIX)) |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y) |
| TOOLCHAIN_EXTERNAL_INSTALL_DIR = $(HOST_DIR)/opt/ext-toolchain |
| else |
| TOOLCHAIN_EXTERNAL_INSTALL_DIR = $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PATH)) |
| endif |
| |
| ifeq ($(TOOLCHAIN_EXTERNAL_INSTALL_DIR),) |
| ifneq ($(TOOLCHAIN_EXTERNAL_PREFIX),) |
| # if no path set, figure it out from path |
| TOOLCHAIN_EXTERNAL_BIN := $(shell dirname $(shell which $(TOOLCHAIN_EXTERNAL_PREFIX)-gcc)) |
| endif |
| else |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y) |
| TOOLCHAIN_EXTERNAL_BIN := $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/$(TOOLCHAIN_EXTERNAL_PREFIX)/bin |
| else |
| TOOLCHAIN_EXTERNAL_BIN := $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/bin |
| endif |
| endif |
| |
| TOOLCHAIN_EXTERNAL_CROSS = $(TOOLCHAIN_EXTERNAL_BIN)/$(TOOLCHAIN_EXTERNAL_PREFIX)- |
| TOOLCHAIN_EXTERNAL_CC = $(TOOLCHAIN_EXTERNAL_CROSS)gcc |
| TOOLCHAIN_EXTERNAL_CXX = $(TOOLCHAIN_EXTERNAL_CROSS)g++ |
| TOOLCHAIN_EXTERNAL_READELF = $(TOOLCHAIN_EXTERNAL_CROSS)readelf |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS = -DBR_SYSROOT='"$(STAGING_SUBDIR)"' |
| |
| ifeq ($(filter $(HOST_DIR)/%,$(TOOLCHAIN_EXTERNAL_BIN)),) |
| # TOOLCHAIN_EXTERNAL_BIN points outside HOST_DIR => absolute path |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += \ |
| -DBR_CROSS_PATH_ABS='"$(TOOLCHAIN_EXTERNAL_BIN)"' |
| else |
| # TOOLCHAIN_EXTERNAL_BIN points inside HOST_DIR => relative path |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += \ |
| -DBR_CROSS_PATH_REL='"$(TOOLCHAIN_EXTERNAL_BIN:$(HOST_DIR)/%=%)"' |
| endif |
| |
| ifeq ($(call qstrip,$(BR2_GCC_TARGET_CPU_REVISION)),) |
| CC_TARGET_CPU_ := $(call qstrip,$(BR2_GCC_TARGET_CPU)) |
| else |
| CC_TARGET_CPU_ := $(call qstrip,$(BR2_GCC_TARGET_CPU)-$(BR2_GCC_TARGET_CPU_REVISION)) |
| endif |
| CC_TARGET_ARCH_ := $(call qstrip,$(BR2_GCC_TARGET_ARCH)) |
| CC_TARGET_ABI_ := $(call qstrip,$(BR2_GCC_TARGET_ABI)) |
| CC_TARGET_FPU_ := $(call qstrip,$(BR2_GCC_TARGET_FPU)) |
| CC_TARGET_FLOAT_ABI_ := $(call qstrip,$(BR2_GCC_TARGET_FLOAT_ABI)) |
| CC_TARGET_MODE_ := $(call qstrip,$(BR2_GCC_TARGET_MODE)) |
| |
| # march/mtune/floating point mode needs to be passed to the external toolchain |
| # to select the right multilib variant |
| ifeq ($(BR2_x86_64),y) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -m64 |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_64 |
| endif |
| ifneq ($(CC_TARGET_ARCH_),) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -march=$(CC_TARGET_ARCH_) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ARCH='"$(CC_TARGET_ARCH_)"' |
| endif |
| ifneq ($(CC_TARGET_CPU_),) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -mcpu=$(CC_TARGET_CPU_) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_CPU='"$(CC_TARGET_CPU_)"' |
| endif |
| ifneq ($(CC_TARGET_ABI_),) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -mabi=$(CC_TARGET_ABI_) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ABI='"$(CC_TARGET_ABI_)"' |
| endif |
| ifneq ($(CC_TARGET_FPU_),) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -mfpu=$(CC_TARGET_FPU_) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_FPU='"$(CC_TARGET_FPU_)"' |
| endif |
| ifneq ($(CC_TARGET_FLOAT_ABI_),) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -mfloat-abi=$(CC_TARGET_FLOAT_ABI_) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_FLOAT_ABI='"$(CC_TARGET_FLOAT_ABI_)"' |
| endif |
| ifneq ($(CC_TARGET_MODE_),) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -m$(CC_TARGET_MODE_) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_MODE='"$(CC_TARGET_MODE_)"' |
| endif |
| ifeq ($(BR2_BINFMT_FLAT),y) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -Wl,-elf2flt |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_BINFMT_FLAT |
| endif |
| ifeq ($(BR2_mipsel)$(BR2_mips64el),y) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_MIPS_TARGET_LITTLE_ENDIAN |
| TOOLCHAIN_EXTERNAL_CFLAGS += -EL |
| endif |
| ifeq ($(BR2_mips)$(BR2_mips64),y) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_MIPS_TARGET_BIG_ENDIAN |
| TOOLCHAIN_EXTERNAL_CFLAGS += -EB |
| endif |
| ifeq ($(BR2_arceb),y) |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ARC_TARGET_BIG_ENDIAN |
| TOOLCHAIN_EXTERNAL_CFLAGS += -EB |
| endif |
| ifneq ($(BR2_TARGET_OPTIMIZATION),) |
| TOOLCHAIN_EXTERNAL_CFLAGS += $(call qstrip,$(BR2_TARGET_OPTIMIZATION)) |
| # We create a list like '"-mfoo", "-mbar", "-mbarfoo"' so that each |
| # flag is a separate argument when used in execv() by the external |
| # toolchain wrapper. |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_ADDITIONAL_CFLAGS='$(foreach f,$(call qstrip,$(BR2_TARGET_OPTIMIZATION)),"$(f)",)' |
| endif |
| |
| ifeq ($(BR2_SOFT_FLOAT),y) |
| TOOLCHAIN_EXTERNAL_CFLAGS += -msoft-float |
| TOOLCHAIN_EXTERNAL_WRAPPER_ARGS += -DBR_SOFTFLOAT=1 |
| endif |
| |
| # The Linaro ARMhf toolchain expects the libraries in |
| # {/usr,}/lib/arm-linux-gnueabihf, but Buildroot copies them to |
| # {/usr,}/lib, so we need to create a symbolic link. |
| define TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK |
| ln -sf . $(TARGET_DIR)/lib/arm-linux-gnueabihf |
| ln -sf . $(TARGET_DIR)/usr/lib/arm-linux-gnueabihf |
| endef |
| |
| define TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK |
| ln -sf . $(TARGET_DIR)/lib/armeb-linux-gnueabihf |
| ln -sf . $(TARGET_DIR)/usr/lib/armeb-linux-gnueabihf |
| endef |
| |
| define TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK |
| ln -sf . $(TARGET_DIR)/lib/aarch64-linux-gnu |
| ln -sf . $(TARGET_DIR)/usr/lib/aarch64-linux-gnu |
| endef |
| |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201305),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi |
| TOOLCHAIN_EXTERNAL_SOURCE = arm-2013.05-24-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201311),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi |
| TOOLCHAIN_EXTERNAL_SOURCE = arm-2013.11-33-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201405),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/arm-none-linux-gnueabi |
| TOOLCHAIN_EXTERNAL_SOURCE = arm-2014.05-29-arm-none-linux-gnueabi-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV7A_201109),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports |
| TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv7a-linux-gnueabi-sdk.tar.bz2 |
| define TOOLCHAIN_EXTERNAL_FIXUP_CMDS |
| mv $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/armv7a/* $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/ |
| rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/ |
| endef |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_ARAGO_ARMV5TE_201109),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://software-dl.ti.com/sdoemb/sdoemb_public_sw/arago_toolchain/2011_09/exports |
| TOOLCHAIN_EXTERNAL_SOURCE = arago-2011.09-armv5te-linux-gnueabi-sdk.tar.bz2 |
| define TOOLCHAIN_EXTERNAL_FIXUP_CMDS |
| mv $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/armv5te/* $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/ |
| rm -rf $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/arago-2011.09/ |
| endef |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries |
| TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-arm-linux-gnueabihf-4.9-2014.09_linux.tar.xz |
| TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMHF_SYMLINK |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_ARMEB),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries |
| TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-armeb-linux-gnueabihf-4.9-2014.09_linux.tar.xz |
| TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_ARMEBHF_SYMLINK |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201311),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = mips-2013.11-36-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201405),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = mips-2014.05-27-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201411),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/mips-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = mips-2014.11-22-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201305),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2013.05-43-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_SANITIZE_KERNEL_HEADERS |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_NIOSII201405),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/nios2-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = sourceryg++-2014.05-47-nios2-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201103),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = freescale-2011.03-38-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201203),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/powerpc-mentor-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = mentor-2012.03-71-powerpc-mentor-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = renesas-2012.03-35-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209),y) |
| TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = renesas-2012.09-61-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-uclinux |
| TOOLCHAIN_EXTERNAL_SOURCE = renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/sh-uclinux |
| TOOLCHAIN_EXTERNAL_SOURCE = renesas-2011.03-36-sh-uclinux-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109),y) |
| TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = ia32-2011.09-24-i686-pc-linux-gnu-i386-linux.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.03-27-i686-pc-linux-gnu-i386-linux.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209),y) |
| TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = ia32-2012.09-62-i686-pc-linux-gnu-i386-linux.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AMD64_201405),y) |
| TOOLCHAIN_EXTERNAL_SITE = https://sourcery.mentor.com/public/gnu_toolchain/x86_64-amd-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = amd-2014.05-25-x86_64-amd-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2012R2/2012R2-RC2/i386 |
| TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2012R2-RC2.i386.tar.bz2 |
| TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2012R2-RC2.i386.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2013R1/2013R1-RC1/i386 |
| TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2013R1-RC1.i386.tar.bz2 |
| TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2013R1-RC1.i386.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://downloads.sourceforge.net/project/adi-toolchain/2014R1/2014R1-RC2/i386 |
| TOOLCHAIN_EXTERNAL_SOURCE = blackfin-toolchain-2014R1-RC2.i386.tar.bz2 |
| TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS = blackfin-toolchain-uclibc-full-2014R1-RC2.i386.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_LINARO_AARCH64),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://releases.linaro.org/14.09/components/toolchain/binaries |
| TOOLCHAIN_EXTERNAL_SOURCE = gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux.tar.xz |
| TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_LINARO_AARCH64_SYMLINK |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64),y) |
| TOOLCHAIN_EXTERNAL_SITE = http://sourcery.mentor.com/public/gnu_toolchain/aarch64-linux-gnu |
| TOOLCHAIN_EXTERNAL_SOURCE = aarch64-2014.05-30-aarch64-linux-gnu-i686-pc-linux-gnu.tar.bz2 |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL_CROSS),y) |
| TOOLCHAIN_EXTERNAL_VERSION = 1.1.1 |
| TOOLCHAIN_EXTERNAL_SITE = https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0/musl-$(TOOLCHAIN_EXTERNAL_VERSION) |
| ifeq ($(BR2_arm),y) |
| TOOLCHAIN_EXTERNAL_SOURCE = crossx86-arm-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz |
| else ifeq ($(BR2_armeb),y) |
| TOOLCHAIN_EXTERNAL_SOURCE = crossx86-armeb-linux-musleabi-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz |
| else ifeq ($(BR2_i386),y) |
| TOOLCHAIN_EXTERNAL_SOURCE = crossx86-i486-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz |
| else ifeq ($(BR2_microblazebe),y) |
| TOOLCHAIN_EXTERNAL_SOURCE = crossx86-microblaze-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz |
| else ifeq ($(BR2_mips),y) |
| ifeq ($(BR2_SOFT_FLOAT),y) |
| TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz |
| else |
| TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mips-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz |
| endif # BR2_SOFT_FLOAT |
| else ifeq ($(BR2_mipsel),y) |
| ifeq ($(BR2_SOFT_FLOAT),y) |
| TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-sf-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz |
| else |
| TOOLCHAIN_EXTERNAL_SOURCE = crossx86-mipsel-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz |
| endif # BR2_SOFT_FLOAT |
| else ifeq ($(BR2_powerpc),y) |
| TOOLCHAIN_EXTERNAL_SOURCE = crossx86-powerpc-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz |
| else ifeq ($(BR2_x86_64),y) |
| TOOLCHAIN_EXTERNAL_SOURCE = crossx86-x86_64-linux-musl-$(TOOLCHAIN_EXTERNAL_VERSION).tar.xz |
| endif |
| else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_SYNOPSYS_ARC_2014_12),y) |
| TOOLCHAIN_EXTERNAL_SITE = https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2014.12 |
| ifeq ($(BR2_arc750d)$(BR2_arc770d),y) |
| TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE = arc700 |
| else |
| TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE = archs |
| endif |
| ifeq ($(BR2_arcle),y) |
| TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS = le |
| else |
| TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS = be |
| endif |
| TOOLCHAIN_EXTERNAL_SOURCE = arc_gnu_2014.12_prebuilt_uclibc_$(TOOLCHAIN_EXTERNAL_SYNOPSYS_ENDIANESS)_$(TOOLCHAIN_EXTERNAL_SYNOPSYS_CORE)_linux_install.tar.gz |
| else |
| # Custom toolchain |
| TOOLCHAIN_EXTERNAL_SITE = $(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))) |
| TOOLCHAIN_EXTERNAL_SOURCE = $(notdir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))) |
| endif |
| |
| # In fact, we don't need to download the toolchain, since it is already |
| # available on the system, so force the site and source to be empty so |
| # that nothing will be downloaded/extracted. |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED),y) |
| TOOLCHAIN_EXTERNAL_SITE = |
| TOOLCHAIN_EXTERNAL_SOURCE = |
| endif |
| |
| TOOLCHAIN_EXTERNAL_ADD_TOOLCHAIN_DEPENDENCY = NO |
| |
| TOOLCHAIN_EXTERNAL_INSTALL_STAGING = YES |
| |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2013R1)$(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2014R1),y) |
| # Special handling for Blackfin toolchain, because of the split in two |
| # tarballs, and the organization of tarball contents. The tarballs |
| # contain ./opt/uClinux/{bfin-uclinux,bfin-linux-uclibc} directories, |
| # which themselves contain the toolchain. This is why we strip more |
| # components than usual. |
| define TOOLCHAIN_EXTERNAL_EXTRACT_CMDS |
| mkdir -p $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) |
| $(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_SOURCE)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) | \ |
| $(TAR) $(TAR_STRIP_COMPONENTS)=3 --hard-dereference -C $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) $(TAR_OPTIONS) - |
| $(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_EXTRA_DOWNLOADS) | \ |
| $(TAR) $(TAR_STRIP_COMPONENTS)=3 --hard-dereference -C $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) $(TAR_OPTIONS) - |
| endef |
| else ifneq ($(TOOLCHAIN_EXTERNAL_SOURCE),) |
| # Normal handling of toolchain tarball extraction. |
| define TOOLCHAIN_EXTERNAL_EXTRACT_CMDS |
| mkdir -p $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) |
| $(call suitable-extractor,$(TOOLCHAIN_EXTERNAL_SOURCE)) $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) | \ |
| $(TAR) $(TAR_STRIP_COMPONENTS)=1 --exclude='usr/lib/locale/*' -C $(TOOLCHAIN_EXTERNAL_INSTALL_DIR) $(TAR_OPTIONS) - |
| $(TOOLCHAIN_EXTERNAL_FIXUP_CMDS) |
| endef |
| endif |
| |
| # Returns the location of the libc.a file for the given compiler + flags |
| define toolchain_find_libc_a |
| $$(readlink -f $$(LANG=C $(1) -print-file-name=libc.a)) |
| endef |
| |
| # Returns the sysroot location for the given compiler + flags |
| define toolchain_find_sysroot |
| $$(echo -n $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:(usr/)?lib(32|64)?/([^/]*/)?libc\.a::') |
| endef |
| |
| # Returns the lib subdirectory for the given compiler + flags (i.e |
| # typically lib32 or lib64 for some toolchains) |
| define toolchain_find_libdir |
| $$(echo -n $(call toolchain_find_libc_a,$(1)) | sed -r -e 's:.*/(usr/)?(lib(32|64)?)/([^/]*/)?libc.a:\2:') |
| endef |
| |
| # Checks for an already installed toolchain: check the toolchain |
| # location, check that it supports sysroot, and then verify that it |
| # matches the configuration provided in Buildroot: ABI, C++ support, |
| # kernel headers version, type of C library and all C library features. |
| define TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS |
| $(Q)$(call check_cross_compiler_exists,$(TOOLCHAIN_EXTERNAL_CC)) |
| $(Q)$(call check_unusable_toolchain,$(TOOLCHAIN_EXTERNAL_CC)) |
| $(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \ |
| if test -z "$${SYSROOT_DIR}" ; then \ |
| @echo "External toolchain doesn't support --sysroot. Cannot use." ; \ |
| exit 1 ; \ |
| fi ; \ |
| $(call check_kernel_headers_version,\ |
| $(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC)),\ |
| $(call qstrip,$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))); \ |
| if test "$(BR2_arm)" = "y" ; then \ |
| $(call check_arm_abi,\ |
| "$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS)",\ |
| $(TOOLCHAIN_EXTERNAL_READELF)) ; \ |
| fi ; \ |
| if test "$(BR2_INSTALL_LIBSTDCPP)" = "y" ; then \ |
| $(call check_cplusplus,$(TOOLCHAIN_EXTERNAL_CXX)) ; \ |
| fi ; \ |
| if test "$(BR2_TOOLCHAIN_EXTERNAL_UCLIBC)" = "y" ; then \ |
| $(call check_uclibc,$${SYSROOT_DIR}) ; \ |
| elif test "$(BR2_TOOLCHAIN_EXTERNAL_MUSL)" = "y" ; then \ |
| $(call check_musl,$${SYSROOT_DIR}) ; \ |
| else \ |
| $(call check_glibc,$${SYSROOT_DIR}) ; \ |
| fi |
| endef |
| |
| # With the musl C library, the libc.so library directly plays the role |
| # of the dynamic library loader. We just need to create a symbolic |
| # link to libc.so with the appropriate name. |
| ifeq ($(BR2_TOOLCHAIN_EXTERNAL_MUSL),y) |
| ifeq ($(BR2_i386),y) |
| MUSL_ARCH = i386 |
| else |
| MUSL_ARCH = $(ARCH) |
| endif |
| define TOOLCHAIN_EXTERNAL_MUSL_LD_LINK |
| ln -sf libc.so $(TARGET_DIR)/lib/ld-musl-$(MUSL_ARCH).so.1 |
| endef |
| TOOLCHAIN_EXTERNAL_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_EXTERNAL_MUSL_LD_LINK |
| endif |
| |
| # Integration of the toolchain into Buildroot: find the main sysroot |
| # and the variant-specific sysroot, then copy the needed libraries to |
| # the $(TARGET_DIR) and copy the whole sysroot (libraries and headers) |
| # to $(STAGING_DIR). |
| # |
| # Variables are defined as follows: |
| # |
| # LIBC_A_LOCATION: location of the libc.a file in the default |
| # multilib variant (allows to find the main |
| # sysroot directory) |
| # Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/usr/lib/libc.a |
| # |
| # SYSROOT_DIR: the main sysroot directory, deduced from |
| # LIBC_A_LOCATION by removing the |
| # usr/lib[32|64]/libc.a part of the path. |
| # Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/ |
| # |
| # ARCH_LIBC_A_LOCATION: location of the libc.a file in the selected |
| # multilib variant (taking into account the |
| # CFLAGS). Allows to find the sysroot of the |
| # selected multilib variant. |
| # Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/usr/lib/libc.a |
| # |
| # ARCH_SYSROOT_DIR: the sysroot of the selected multilib variant, |
| # deduced from ARCH_LIBC_A_LOCATION by removing |
| # usr/lib[32|64]/libc.a at the end of the path. |
| # Ex: /x-tools/mips-2011.03/mips-linux-gnu/libc/mips16/soft-float/el/ |
| # |
| # ARCH_LIB_DIR: 'lib', 'lib32' or 'lib64' depending on where libraries |
| # are stored. Deduced from ARCH_LIBC_A_LOCATION by |
| # looking at usr/lib??/libc.a. |
| # Ex: lib |
| # |
| # ARCH_SUBDIR: the relative location of the sysroot of the selected |
| # multilib variant compared to the main sysroot. |
| # Ex: mips16/soft-float/el |
| # |
| # SUPPORT_LIB_DIR: some toolchains, such as recent Linaro toolchains, |
| # store GCC support libraries (libstdc++, |
| # libgcc_s, etc.) outside of the sysroot. In |
| # this case, SUPPORT_LIB_DIR is set to a |
| # non-empty value, and points to the directory |
| # where these support libraries are |
| # available. Those libraries will be copied to |
| # our sysroot, and the directory will also be |
| # considered when searching libraries for copy |
| # to the target filesystem. |
| |
| define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS |
| $(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \ |
| if test -z "$${SYSROOT_DIR}" ; then \ |
| @echo "External toolchain doesn't support --sysroot. Cannot use." ; \ |
| exit 1 ; \ |
| fi ; \ |
| ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ |
| ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ |
| SUPPORT_LIB_DIR="" ; \ |
| if test `find $${ARCH_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \ |
| LIBSTDCPP_A_LOCATION=$$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \ |
| if [ -e "$${LIBSTDCPP_A_LOCATION}" ]; then \ |
| SUPPORT_LIB_DIR=`readlink -f $${LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \ |
| fi ; \ |
| fi ; \ |
| ARCH_SUBDIR=`echo $${ARCH_SYSROOT_DIR} | sed -r -e "s:^$${SYSROOT_DIR}(.*)/$$:\1:"` ; \ |
| if test -z "$(BR2_STATIC_LIBS)" ; then \ |
| $(call MESSAGE,"Copying external toolchain libraries to target...") ; \ |
| for libs in $(LIB_EXTERNAL_LIBS); do \ |
| $(call copy_toolchain_lib_root,$${ARCH_SYSROOT_DIR},$${SUPPORT_LIB_DIR},$${ARCH_LIB_DIR},$$libs,/lib); \ |
| done ; \ |
| for libs in $(USR_LIB_EXTERNAL_LIBS); do \ |
| $(call copy_toolchain_lib_root,$${ARCH_SYSROOT_DIR},$${SUPPORT_LIB_DIR},$${ARCH_LIB_DIR},$$libs,/usr/lib); \ |
| done ; \ |
| fi ; \ |
| if test "$(BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY)" = "y"; then \ |
| $(call MESSAGE,"Copying gdbserver") ; \ |
| gdbserver_found=0 ; \ |
| for d in $${ARCH_SYSROOT_DIR}/usr $${ARCH_SYSROOT_DIR}/../debug-root/usr $${ARCH_SYSROOT_DIR}/usr/$${ARCH_LIB_DIR} ; do \ |
| if test -f $${d}/bin/gdbserver ; then \ |
| install -m 0755 -D $${d}/bin/gdbserver $(TARGET_DIR)/usr/bin/gdbserver ; \ |
| gdbserver_found=1 ; \ |
| break ; \ |
| fi ; \ |
| done ; \ |
| if [ $${gdbserver_found} -eq 0 ] ; then \ |
| echo "Could not find gdbserver in external toolchain" ; \ |
| exit 1 ; \ |
| fi ; \ |
| fi |
| endef |
| |
| define TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS |
| $(Q)SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC))" ; \ |
| if test -z "$${SYSROOT_DIR}" ; then \ |
| @echo "External toolchain doesn't support --sysroot. Cannot use." ; \ |
| exit 1 ; \ |
| fi ; \ |
| ARCH_SYSROOT_DIR="$(call toolchain_find_sysroot,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ |
| ARCH_LIB_DIR="$(call toolchain_find_libdir,$(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ |
| SUPPORT_LIB_DIR="" ; \ |
| if test `find $${ARCH_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \ |
| LIBSTDCPP_A_LOCATION=$$(LANG=C $(TOOLCHAIN_EXTERNAL_CC) $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \ |
| if [ -e "$${LIBSTDCPP_A_LOCATION}" ]; then \ |
| SUPPORT_LIB_DIR=`readlink -f $${LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \ |
| fi ; \ |
| fi ; \ |
| ARCH_SUBDIR=`echo $${ARCH_SYSROOT_DIR} | sed -r -e "s:^$${SYSROOT_DIR}(.*)/$$:\1:"` ; \ |
| $(call MESSAGE,"Copying external toolchain sysroot to staging...") ; \ |
| $(call copy_toolchain_sysroot,$${SYSROOT_DIR},$${ARCH_SYSROOT_DIR},$${ARCH_SUBDIR},$${ARCH_LIB_DIR},$${SUPPORT_LIB_DIR}) |
| endef |
| |
| # Special installation target used on the Blackfin architecture when |
| # FDPIC is not the primary binary format being used, but the user has |
| # nonetheless requested the installation of the FDPIC libraries to the |
| # target filesystem. |
| ifeq ($(BR2_BFIN_INSTALL_FDPIC_SHARED),y) |
| define TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC |
| $(Q)$(call MESSAGE,"Install external toolchain FDPIC libraries to target...") ; \ |
| FDPIC_EXTERNAL_CC=$(dir $(TOOLCHAIN_EXTERNAL_CC))/../../bfin-linux-uclibc/bin/bfin-linux-uclibc-gcc ; \ |
| FDPIC_SYSROOT_DIR="$(call toolchain_find_sysroot,$${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ |
| FDPIC_LIB_DIR="$(call toolchain_find_libdir,$${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS))" ; \ |
| FDPIC_SUPPORT_LIB_DIR="" ; \ |
| if test `find $${FDPIC_SYSROOT_DIR} -name 'libstdc++.a' | wc -l` -eq 0 ; then \ |
| FDPIC_LIBSTDCPP_A_LOCATION=$$(LANG=C $${FDPIC_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS) -print-file-name=libstdc++.a) ; \ |
| if [ -e "$${FDPIC_LIBSTDCPP_A_LOCATION}" ]; then \ |
| FDPIC_SUPPORT_LIB_DIR=`readlink -f $${FDPIC_LIBSTDCPP_A_LOCATION} | sed -r -e 's:libstdc\+\+\.a::'` ; \ |
| fi ; \ |
| fi ; \ |
| for libs in $(LIB_EXTERNAL_LIBS); do \ |
| $(call copy_toolchain_lib_root,$${FDPIC_SYSROOT_DIR},$${FDPIC_SUPPORT_LIB_DIR},$${FDPIC_LIB_DIR},$$libs,/lib); \ |
| done ; \ |
| for libs in $(USR_LIB_EXTERNAL_LIBS); do \ |
| $(call copy_toolchain_lib_root,$${FDPIC_SYSROOT_DIR},$${FDPIC_SUPPORT_LIB_DIR},$${FDPIC_LIB_DIR},$$libs,/usr/lib); \ |
| done |
| endef |
| endif |
| |
| # Special installation target used on the Blackfin architecture when |
| # shared FLAT is not the primary format being used, but the user has |
| # nonetheless requested the installation of the shared FLAT libraries |
| # to the target filesystem. The flat libraries are found and linked |
| # according to the index in name "libN.so". Index 1 is reserved for |
| # the standard C library. Customer libraries can use 4 and above. |
| ifeq ($(BR2_BFIN_INSTALL_FLAT_SHARED),y) |
| define TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT |
| $(Q)$(call MESSAGE,"Install external toolchain FLAT libraries to target...") ; \ |
| FLAT_EXTERNAL_CC=$(dir $(TOOLCHAIN_EXTERNAL_CC))../../bfin-uclinux/bin/bfin-uclinux-gcc ; \ |
| FLAT_LIBC_A_LOCATION=`$${FLAT_EXTERNAL_CC} $(TOOLCHAIN_EXTERNAL_CFLAGS) -mid-shared-library -print-file-name=libc`; \ |
| if [ -f $${FLAT_LIBC_A_LOCATION} -a ! -h $${FLAT_LIBC_A_LOCATION} ] ; then \ |
| $(INSTALL) -D $${FLAT_LIBC_A_LOCATION} $(TARGET_DIR)/lib/lib1.so; \ |
| fi |
| endef |
| endif |
| |
| # We use --hash-style=both to increase the compatibility of |
| # the generated binary with older platforms, except for MIPS, |
| # where the only acceptable hash style is 'sysv' |
| ifeq ($(findstring mips,$(HOSTARCH)),mips) |
| TOOLCHAIN_EXTERNAL_WRAPPER_HASH_STYLE = sysv |
| else |
| TOOLCHAIN_EXTERNAL_WRAPPER_HASH_STYLE = both |
| endif |
| |
| # Build toolchain wrapper for preprocessor, C and C++ compiler and setup |
| # symlinks for everything else. Skip gdb symlink when we are building our |
| # own gdb to prevent two gdb's in output/host/usr/bin. |
| # When the link-time-optimazation flag '-flto' is used, then the compiler |
| # and binutils have to support lto. ar/ranlib need to be called with the |
| # lto plugin. The wrappers *-gcc-ar and *-gcc-ranlib provided by GCC could |
| # be used as drop-ins for ar/runlib when Makefiles are used which do not |
| # pass the lto arguments. |
| define TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER |
| $(Q)$(call MESSAGE,"Building ext-toolchain wrapper") |
| mkdir -p $(HOST_DIR)/usr/bin; cd $(HOST_DIR)/usr/bin; \ |
| for i in $(TOOLCHAIN_EXTERNAL_CROSS)*; do \ |
| base=$${i##*/}; \ |
| case "$$base" in \ |
| *-ar|*-ranlib|*-nm) \ |
| ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \ |
| ;; \ |
| *cc|*cc-*|*++|*++-*|*cpp) \ |
| ln -sf ext-toolchain-wrapper $$base; \ |
| ;; \ |
| *gdb|*gdbtui) \ |
| if test "$(BR2_PACKAGE_HOST_GDB)" != "y"; then \ |
| ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \ |
| fi \ |
| ;; \ |
| *) \ |
| ln -sf $$(echo $$i | sed 's%^$(HOST_DIR)%../..%') .; \ |
| ;; \ |
| esac; \ |
| done ; |
| $(HOSTCC) $(HOST_CFLAGS) $(TOOLCHAIN_EXTERNAL_WRAPPER_ARGS) \ |
| -s -Wl,--hash-style=$(TOOLCHAIN_EXTERNAL_WRAPPER_HASH_STYLE) \ |
| toolchain/toolchain-external/ext-toolchain-wrapper.c \ |
| -o $(HOST_DIR)/usr/bin/ext-toolchain-wrapper |
| endef |
| |
| # This sed magic is taken from Linux headers_install.sh script. |
| define TOOLCHAIN_EXTERNAL_SANITIZE_KERNEL_HEADERS |
| $(Q)$(call MESSAGE,"Sanitizing kernel headers"); |
| find $(STAGING_DIR)/usr/include/linux/ -name "*.h" | xargs sed -r -i \ |
| -e 's/([ \t(])(__user|__force|__iomem)[ \t]/\1/g' \ |
| -e 's/__attribute_const__([ \t]|$$)/\1/g' \ |
| -e 's@^#include <linux/compiler.h>@@' \ |
| -e 's/(^|[^a-zA-Z0-9])__packed([^a-zA-Z0-9_]|$$)/\1__attribute__((packed))\2/g' \ |
| -e 's/(^|[ \t(])(inline|asm|volatile)([ \t(]|$$)/\1__\2__\3/g' \ |
| -e 's@#(ifndef|define|endif[ \t]*/[*])[ \t]*_UAPI@#\1 @' |
| endef |
| |
| define TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT |
| if test -f $(TARGET_CROSS)gdb ; then \ |
| $(call gen_gdbinit_file) ; \ |
| fi |
| endef |
| |
| define TOOLCHAIN_EXTERNAL_INSTALL_STAGING_CMDS |
| $(TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS) |
| $(TOOLCHAIN_EXTERNAL_INSTALL_WRAPPER) |
| $(TOOLCHAIN_EXTERNAL_INSTALL_GDBINIT) |
| endef |
| |
| # Even though we're installing things in both the staging, the host |
| # and the target directory, we do everything within the |
| # install-staging step, arbitrarily. |
| define TOOLCHAIN_EXTERNAL_INSTALL_TARGET_CMDS |
| $(TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS) |
| $(TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC) |
| $(TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT) |
| endef |
| |
| $(eval $(generic-package)) |
