package/pkg-cmake.mk - buildroot - Git at Google

 ################################################################################
 # CMake package infrastructure
 #
 # This file implements an infrastructure that eases development of
 # package .mk files for CMake packages. It should be used for all
 # packages that use CMake as their build system.
 #
 # See the Buildroot documentation for details on the usage of this
 # infrastructure
 #
 # In terms of implementation, this CMake infrastructure requires
 # the .mk file to only specify metadata information about the
 # package: name, version, download URL, etc.
 #
 # We still allow the package .mk file to override what the different
 # steps are doing, if needed. For example, if <PKG>_BUILD_CMDS is
 # already defined, it is used as the list of commands to perform to
 # build the package, instead of the default CMake behaviour. The
 # package can also define some post operation hooks.
 #
 ################################################################################

 # Set compiler variables.
 ifeq ($(BR2_CCACHE),y)
 CMAKE_HOST_C_COMPILER = $(HOSTCC_NOCCACHE)
 CMAKE_HOST_CXX_COMPILER = $(HOSTCXX_NOCCACHE)
 CMAKE_HOST_C_COMPILER_LAUNCHER = $(HOST_DIR)/bin/ccache
 CMAKE_HOST_CXX_COMPILER_LAUNCHER = $(HOST_DIR)/bin/ccache
 else
 CMAKE_HOST_C_COMPILER = $(HOSTCC)
 CMAKE_HOST_CXX_COMPILER = $(HOSTCXX)
 endif

 ifneq ($(QUIET),)
 CMAKE_QUIET = -DCMAKE_RULE_MESSAGES=OFF -DCMAKE_INSTALL_MESSAGE=NEVER
 endif

 ################################################################################
 # inner-cmake-package -- defines how the configuration, compilation and
 # installation of a CMake package should be done, implements a few hooks to
 # tune the build process and calls the generic package infrastructure to
 # generate the necessary make targets
 #
 #  argument 1 is the lowercase package name
 #  argument 2 is the uppercase package name, including a HOST_ prefix
 #             for host packages
 #  argument 3 is the uppercase package name, without the HOST_ prefix
 #             for host packages
 #  argument 4 is the type (target or host)
 ################################################################################

 define inner-cmake-package

 $(3)_SUPPORTS_IN_SOURCE_BUILD ?= YES

 # The default backend, unless specified by the package
 $(3)_CMAKE_BACKEND ?= make

 ifeq ($$($(3)_SUPPORTS_IN_SOURCE_BUILD),YES)
 $(2)_BUILDDIR			= $$($(2)_SRCDIR)
 else
 $(2)_BUILDDIR			= $$($(2)_SRCDIR)/buildroot-build
 endif

 ifeq ($$($(3)_CMAKE_BACKEND),make)
 $(2)_GENERATOR = "Unix Makefiles"
 # $$(MAKE) can be 'make -jN', we just want 'make'  (possibly with a full path)
 $(2)_GENERATOR_PROGRAM = $$(firstword $$(MAKE))
 # Generator specific code (make) should be avoided,
 # but for now, copy them to the new variables.
 $(2)_BUILD_ENV ?= $$($(2)_MAKE_ENV)
 $(2)_BUILD_OPTS ?= -- $$($(2)_MAKE_OPTS)

 else ifeq ($$($(3)_CMAKE_BACKEND),ninja)
 $(2)_DEPENDENCIES += host-ninja
 $(2)_GENERATOR = "Ninja"
 $(2)_GENERATOR_PROGRAM = $$(HOST_DIR)/bin/ninja

 else
 $$(error Unsupported cmake backend "$$($(3)_CMAKE_BACKEND)")
 endif

 #
 # Configure step. Only define it if not already defined by the package
 # .mk file. And take care of the differences between host and target
 # packages.
 #
 ifndef $(2)_CONFIGURE_CMDS
 ifeq ($(4),target)

 # Configure package for target
 #
 # - We are passing BUILD_SHARED_LIBS because it is documented as a
 #   standard CMake variable to control the build of shared libraries
 #   (see https://cmake.org/cmake/help/v3.8/manual/cmake-variables.7.html#variables-that-change-behavior)
 # - We are not passing BUILD_STATIC_LIBS because it is *not*
 #   documented as a standard CMake variable. If a package supports it,
 #   it must handle it explicitly.
 #
 define $(2)_CONFIGURE_CMDS
 	(mkdir -p $$($$(PKG)_BUILDDIR) && \
 	cd $$($$(PKG)_BUILDDIR) && \
 	rm -f CMakeCache.txt && \
 	PATH=$$(BR_PATH) \
 	$$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
 		-G$$($$(PKG)_GENERATOR) \
 		-DCMAKE_MAKE_PROGRAM="$$($$(PKG)_GENERATOR_PROGRAM)" \
 		-DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \
 		-DCMAKE_INSTALL_PREFIX="/usr" \
 		-DCMAKE_INSTALL_RUNSTATEDIR="/run" \
 		-DCMAKE_COLOR_MAKEFILE=OFF \
 		-DBUILD_DOC=OFF \
 		-DBUILD_DOCS=OFF \
 		-DBUILD_EXAMPLE=OFF \
 		-DBUILD_EXAMPLES=OFF \
 		-DBUILD_TEST=OFF \
 		-DBUILD_TESTS=OFF \
 		-DBUILD_TESTING=OFF \
 		-DBUILD_SHARED_LIBS=$$(if $$(BR2_STATIC_LIBS),OFF,ON) \
 		$$(CMAKE_QUIET) \
 		$$($$(PKG)_CONF_OPTS) \
 	)
 endef
 else

 # Configure package for host
 define $(2)_CONFIGURE_CMDS
 	(mkdir -p $$($$(PKG)_BUILDDIR) && \
 	cd $$($$(PKG)_BUILDDIR) && \
 	rm -f CMakeCache.txt && \
 	PATH=$$(BR_PATH) \
 	PKG_CONFIG="$$(PKG_CONFIG_HOST_BINARY)" \
 	PKG_CONFIG_SYSROOT_DIR="/" \
 	PKG_CONFIG_LIBDIR="$$(HOST_DIR)/lib/pkgconfig:$$(HOST_DIR)/share/pkgconfig" \
 	PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \
 	PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \
 	$$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
 		-G$$($$(PKG)_GENERATOR) \
 		-DCMAKE_MAKE_PROGRAM="$$($$(PKG)_GENERATOR_PROGRAM)" \
 		-DCMAKE_INSTALL_SO_NO_EXE=0 \
 		-DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \
 		-DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \
 		-DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY="BOTH" \
 		-DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" \
 		-DCMAKE_INSTALL_PREFIX="$$(HOST_DIR)" \
 		-DCMAKE_C_FLAGS="$$(HOST_CFLAGS)" \
 		-DCMAKE_CXX_FLAGS="$$(HOST_CXXFLAGS)" \
 		-DCMAKE_EXE_LINKER_FLAGS="$$(HOST_LDFLAGS)" \
 		-DCMAKE_SHARED_LINKER_FLAGS="$$(HOST_LDFLAGS)" \
 		-DCMAKE_C_COMPILER="$$(CMAKE_HOST_C_COMPILER)" \
 		-DCMAKE_CXX_COMPILER="$$(CMAKE_HOST_CXX_COMPILER)" \
 		$(if $$(CMAKE_HOST_C_COMPILER_LAUNCHER),\
 			-DCMAKE_C_COMPILER_LAUNCHER="$$(CMAKE_HOST_C_COMPILER_LAUNCHER)" \
 			-DCMAKE_CXX_COMPILER_LAUNCHER="$$(CMAKE_HOST_CXX_COMPILER_LAUNCHER)" \
 		) \
 		-DCMAKE_COLOR_MAKEFILE=OFF \
 		-DBUILD_DOC=OFF \
 		-DBUILD_DOCS=OFF \
 		-DBUILD_EXAMPLE=OFF \
 		-DBUILD_EXAMPLES=OFF \
 		-DBUILD_TEST=OFF \
 		-DBUILD_TESTS=OFF \
 		-DBUILD_TESTING=OFF \
 		-DBUILD_SHARED_LIBS=ON \
 		$$(CMAKE_QUIET) \
 		$$($$(PKG)_CONF_OPTS) \
 	)
 endef
 endif
 endif

 # Since some CMake modules (even upstream ones) use pgk_check_modules
 # primitives to find {C,LD}FLAGS, add it to the dependency list.
 $(2)_DEPENDENCIES += host-pkgconf

 $(2)_DEPENDENCIES += $(BR2_CMAKE_HOST_DEPENDENCY)

 #
 # Build step. Only define it if not already defined by the package .mk
 # file.
 #
 ifndef $(2)_BUILD_CMDS
 ifeq ($(4),target)
 define $(2)_BUILD_CMDS
 	$$(TARGET_MAKE_ENV) $$($$(PKG)_BUILD_ENV) $$(BR2_CMAKE) --build $$($$(PKG)_BUILDDIR) -j$(PARALLEL_JOBS) $$($$(PKG)_BUILD_OPTS)
 endef
 else
 define $(2)_BUILD_CMDS
 	$$(HOST_MAKE_ENV) $$($$(PKG)_BUILD_ENV) $$(BR2_CMAKE) --build $$($$(PKG)_BUILDDIR) -j$(PARALLEL_JOBS) $$($$(PKG)_BUILD_OPTS)
 endef
 endif
 endif

 #
 # Host installation step. Only define it if not already defined by the
 # package .mk file.
 #
 ifndef $(2)_INSTALL_CMDS
 define $(2)_INSTALL_CMDS
 	$$(HOST_MAKE_ENV) $$($$(PKG)_BUILD_ENV) $$(BR2_CMAKE) --install $$($$(PKG)_BUILDDIR) $$($$(PKG)_INSTALL_OPTS)
 endef
 endif

 #
 # Staging installation step. Only define it if not already defined by
 # the package .mk file.
 #
 ifndef $(2)_INSTALL_STAGING_CMDS
 define $(2)_INSTALL_STAGING_CMDS
 	$$(TARGET_MAKE_ENV) $$($$(PKG)_BUILD_ENV) DESTDIR=$$(STAGING_DIR) $$(BR2_CMAKE) --install $$($$(PKG)_BUILDDIR) $$($$(PKG)_INSTALL_STAGING_OPTS)
 endef
 endif

 #
 # Target installation step. Only define it if not already defined by
 # the package .mk file.
 #
 ifndef $(2)_INSTALL_TARGET_CMDS
 define $(2)_INSTALL_TARGET_CMDS
 	$$(TARGET_MAKE_ENV) $$($$(PKG)_BUILD_ENV) DESTDIR=$$(TARGET_DIR) $$(BR2_CMAKE) --install $$($$(PKG)_BUILDDIR) $$($$(PKG)_INSTALL_TARGET_OPTS)
 endef
 endif

 # Call the generic package infrastructure to generate the necessary
 # make targets
 $(call inner-generic-package,$(1),$(2),$(3),$(4))

 endef

 ################################################################################
 # cmake-package -- the target generator macro for CMake packages
 ################################################################################

 cmake-package = $(call inner-cmake-package,$(pkgname),$(call UPPERCASE,$(pkgname)),$(call UPPERCASE,$(pkgname)),target)
 host-cmake-package = $(call inner-cmake-package,host-$(pkgname),$(call UPPERCASE,host-$(pkgname)),$(call UPPERCASE,$(pkgname)),host)

 ################################################################################
 # Generation of the CMake toolchain file
 ################################################################################

 # CMAKE_SYSTEM_PROCESSOR should match uname -m
 ifeq ($(BR2_ARM_CPU_ARMV4),y)
 CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT = armv4
 else ifeq ($(BR2_ARM_CPU_ARMV5),y)
 CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT = armv5
 else ifeq ($(BR2_ARM_CPU_ARMV6),y)
 CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT = armv6
 else ifeq ($(BR2_ARM_CPU_ARMV7A),y)
 CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT = armv7
 else ifeq ($(BR2_ARM_CPU_ARMV8A),y)
 CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT = armv8
 endif

 ifeq ($(BR2_arm),y)
 CMAKE_SYSTEM_PROCESSOR = $(CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT)l
 else ifeq ($(BR2_armeb),y)
 CMAKE_SYSTEM_PROCESSOR = $(CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT)b
 else ifeq ($(call qstrip,$(BR2_ARCH)),powerpc64)
 CMAKE_SYSTEM_PROCESSOR = ppc64
 else ifeq ($(call qstrip,$(BR2_ARCH)),powerpc64le)
 CMAKE_SYSTEM_PROCESSOR = ppc64le
 else
 CMAKE_SYSTEM_PROCESSOR = $(BR2_ARCH)
 endif

 # In order to allow the toolchain to be relocated, we calculate the HOST_DIR
 # based on the toolchainfile.cmake file's location: $(HOST_DIR)/share/buildroot
 # In all the other variables, HOST_DIR will be replaced by RELOCATED_HOST_DIR,
 # so we have to strip "$(HOST_DIR)/" from the paths that contain it.
 define TOOLCHAIN_CMAKE_INSTALL_FILES
 	@mkdir -p $(HOST_DIR)/share/buildroot
 	sed \
 		-e 's#@@STAGING_SUBDIR@@#$(call qstrip,$(STAGING_SUBDIR))#' \
 		-e 's#@@TARGET_CFLAGS@@#$(call qstrip,$(TARGET_CFLAGS))#' \
 		-e 's#@@TARGET_CXXFLAGS@@#$(call qstrip,$(TARGET_CXXFLAGS))#' \
 		-e 's#@@TARGET_FCFLAGS@@#$(call qstrip,$(TARGET_FCFLAGS))#' \
 		-e 's#@@TARGET_LDFLAGS@@#$(call qstrip,$(TARGET_LDFLAGS))#' \
 		-e 's#@@TARGET_CC@@#$(subst $(HOST_DIR)/,,$(call qstrip,$(TARGET_CC)))#' \
 		-e 's#@@TARGET_CXX@@#$(subst $(HOST_DIR)/,,$(call qstrip,$(TARGET_CXX)))#' \
 		-e 's#@@TARGET_FC@@#$(subst $(HOST_DIR)/,,$(call qstrip,$(TARGET_FC)))#' \
 		-e 's#@@CMAKE_SYSTEM_PROCESSOR@@#$(call qstrip,$(CMAKE_SYSTEM_PROCESSOR))#' \
 		-e 's#@@TOOLCHAIN_HAS_CXX@@#$(if $(BR2_INSTALL_LIBSTDCPP),1,0)#' \
 		-e 's#@@TOOLCHAIN_HAS_FORTRAN@@#$(if $(BR2_TOOLCHAIN_HAS_FORTRAN),1,0)#' \
 		-e 's#@@CMAKE_BUILD_TYPE@@#$(if $(BR2_ENABLE_RUNTIME_DEBUG),Debug,Release)#' \
 		$(TOPDIR)/support/misc/toolchainfile.cmake.in \
 		> $(HOST_DIR)/share/buildroot/toolchainfile.cmake
 	$(Q)$(INSTALL) -D -m 0644 support/misc/Buildroot.cmake \
 		$(HOST_DIR)/share/buildroot/Platform/Buildroot.cmake
 endef

 TOOLCHAIN_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_CMAKE_INSTALL_FILES
	################################################################################
	# CMake package infrastructure
	#
	# This file implements an infrastructure that eases development of
	# package .mk files for CMake packages. It should be used for all
	# packages that use CMake as their build system.
	#
	# See the Buildroot documentation for details on the usage of this
	# infrastructure
	#
	# In terms of implementation, this CMake infrastructure requires
	# the .mk file to only specify metadata information about the
	# package: name, version, download URL, etc.
	#
	# We still allow the package .mk file to override what the different
	# steps are doing, if needed. For example, if <PKG>_BUILD_CMDS is
	# already defined, it is used as the list of commands to perform to
	# build the package, instead of the default CMake behaviour. The
	# package can also define some post operation hooks.
	#
	################################################################################

	# Set compiler variables.
	ifeq ($(BR2_CCACHE),y)
	CMAKE_HOST_C_COMPILER = $(HOSTCC_NOCCACHE)
	CMAKE_HOST_CXX_COMPILER = $(HOSTCXX_NOCCACHE)
	CMAKE_HOST_C_COMPILER_LAUNCHER = $(HOST_DIR)/bin/ccache
	CMAKE_HOST_CXX_COMPILER_LAUNCHER = $(HOST_DIR)/bin/ccache
	else
	CMAKE_HOST_C_COMPILER = $(HOSTCC)
	CMAKE_HOST_CXX_COMPILER = $(HOSTCXX)
	endif

	ifneq ($(QUIET),)
	CMAKE_QUIET = -DCMAKE_RULE_MESSAGES=OFF -DCMAKE_INSTALL_MESSAGE=NEVER
	endif

	################################################################################
	# inner-cmake-package -- defines how the configuration, compilation and
	# installation of a CMake package should be done, implements a few hooks to
	# tune the build process and calls the generic package infrastructure to
	# generate the necessary make targets
	#
	# argument 1 is the lowercase package name
	# argument 2 is the uppercase package name, including a HOST_ prefix
	# for host packages
	# argument 3 is the uppercase package name, without the HOST_ prefix
	# for host packages
	# argument 4 is the type (target or host)
	################################################################################

	define inner-cmake-package

	$(3)_SUPPORTS_IN_SOURCE_BUILD ?= YES

	# The default backend, unless specified by the package
	$(3)_CMAKE_BACKEND ?= make

	ifeq ($$($(3)_SUPPORTS_IN_SOURCE_BUILD),YES)
	$(2)_BUILDDIR = $$($(2)_SRCDIR)
	else
	$(2)_BUILDDIR = $$($(2)_SRCDIR)/buildroot-build
	endif

	ifeq ($$($(3)_CMAKE_BACKEND),make)
	$(2)_GENERATOR = "Unix Makefiles"
	# $$(MAKE) can be 'make -jN', we just want 'make' (possibly with a full path)
	$(2)_GENERATOR_PROGRAM = $$(firstword $$(MAKE))
	# Generator specific code (make) should be avoided,
	# but for now, copy them to the new variables.
	$(2)_BUILD_ENV ?= $$($(2)_MAKE_ENV)
	$(2)_BUILD_OPTS ?= -- $$($(2)_MAKE_OPTS)

	else ifeq ($$($(3)_CMAKE_BACKEND),ninja)
	$(2)_DEPENDENCIES += host-ninja
	$(2)_GENERATOR = "Ninja"
	$(2)_GENERATOR_PROGRAM = $$(HOST_DIR)/bin/ninja

	else
	$$(error Unsupported cmake backend "$$($(3)_CMAKE_BACKEND)")
	endif

	#
	# Configure step. Only define it if not already defined by the package
	# .mk file. And take care of the differences between host and target
	# packages.
	#
	ifndef $(2)_CONFIGURE_CMDS
	ifeq ($(4),target)

	# Configure package for target
	#
	# - We are passing BUILD_SHARED_LIBS because it is documented as a
	# standard CMake variable to control the build of shared libraries
	# (see https://cmake.org/cmake/help/v3.8/manual/cmake-variables.7.html#variables-that-change-behavior)
	# - We are not passing BUILD_STATIC_LIBS because it is not
	# documented as a standard CMake variable. If a package supports it,
	# it must handle it explicitly.
	#
	define $(2)_CONFIGURE_CMDS
	(mkdir -p $$($$(PKG)_BUILDDIR) && \
	cd $$($$(PKG)_BUILDDIR) && \
	rm -f CMakeCache.txt && \
	PATH=$$(BR_PATH) \
	$$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
	-G$$($$(PKG)_GENERATOR) \
	-DCMAKE_MAKE_PROGRAM="$$($$(PKG)_GENERATOR_PROGRAM)" \
	-DCMAKE_TOOLCHAIN_FILE="$$(HOST_DIR)/share/buildroot/toolchainfile.cmake" \
	-DCMAKE_INSTALL_PREFIX="/usr" \
	-DCMAKE_INSTALL_RUNSTATEDIR="/run" \
	-DCMAKE_COLOR_MAKEFILE=OFF \
	-DBUILD_DOC=OFF \
	-DBUILD_DOCS=OFF \
	-DBUILD_EXAMPLE=OFF \
	-DBUILD_EXAMPLES=OFF \
	-DBUILD_TEST=OFF \
	-DBUILD_TESTS=OFF \
	-DBUILD_TESTING=OFF \
	-DBUILD_SHARED_LIBS=$$(if $$(BR2_STATIC_LIBS),OFF,ON) \
	$$(CMAKE_QUIET) \
	$$($$(PKG)_CONF_OPTS) \
	)
	endef
	else

	# Configure package for host
	define $(2)_CONFIGURE_CMDS
	(mkdir -p $$($$(PKG)_BUILDDIR) && \
	cd $$($$(PKG)_BUILDDIR) && \
	rm -f CMakeCache.txt && \
	PATH=$$(BR_PATH) \
	PKG_CONFIG="$$(PKG_CONFIG_HOST_BINARY)" \
	PKG_CONFIG_SYSROOT_DIR="/" \
	PKG_CONFIG_LIBDIR="$$(HOST_DIR)/lib/pkgconfig:$$(HOST_DIR)/share/pkgconfig" \
	PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \
	PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \
	$$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
	-G$$($$(PKG)_GENERATOR) \
	-DCMAKE_MAKE_PROGRAM="$$($$(PKG)_GENERATOR_PROGRAM)" \
	-DCMAKE_INSTALL_SO_NO_EXE=0 \
	-DCMAKE_FIND_ROOT_PATH="$$(HOST_DIR)" \
	-DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" \
	-DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY="BOTH" \
	-DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" \
	-DCMAKE_INSTALL_PREFIX="$$(HOST_DIR)" \
	-DCMAKE_C_FLAGS="$$(HOST_CFLAGS)" \
	-DCMAKE_CXX_FLAGS="$$(HOST_CXXFLAGS)" \
	-DCMAKE_EXE_LINKER_FLAGS="$$(HOST_LDFLAGS)" \
	-DCMAKE_SHARED_LINKER_FLAGS="$$(HOST_LDFLAGS)" \
	-DCMAKE_C_COMPILER="$$(CMAKE_HOST_C_COMPILER)" \
	-DCMAKE_CXX_COMPILER="$$(CMAKE_HOST_CXX_COMPILER)" \
	$(if $$(CMAKE_HOST_C_COMPILER_LAUNCHER),\
	-DCMAKE_C_COMPILER_LAUNCHER="$$(CMAKE_HOST_C_COMPILER_LAUNCHER)" \
	-DCMAKE_CXX_COMPILER_LAUNCHER="$$(CMAKE_HOST_CXX_COMPILER_LAUNCHER)" \
	) \
	-DCMAKE_COLOR_MAKEFILE=OFF \
	-DBUILD_DOC=OFF \
	-DBUILD_DOCS=OFF \
	-DBUILD_EXAMPLE=OFF \
	-DBUILD_EXAMPLES=OFF \
	-DBUILD_TEST=OFF \
	-DBUILD_TESTS=OFF \
	-DBUILD_TESTING=OFF \
	-DBUILD_SHARED_LIBS=ON \
	$$(CMAKE_QUIET) \
	$$($$(PKG)_CONF_OPTS) \
	)
	endef
	endif
	endif

	# Since some CMake modules (even upstream ones) use pgk_check_modules
	# primitives to find {C,LD}FLAGS, add it to the dependency list.
	$(2)_DEPENDENCIES += host-pkgconf

	$(2)_DEPENDENCIES += $(BR2_CMAKE_HOST_DEPENDENCY)

	#
	# Build step. Only define it if not already defined by the package .mk
	# file.
	#
	ifndef $(2)_BUILD_CMDS
	ifeq ($(4),target)
	define $(2)_BUILD_CMDS
	$$(TARGET_MAKE_ENV) $$($$(PKG)_BUILD_ENV) $$(BR2_CMAKE) --build $$($$(PKG)_BUILDDIR) -j$(PARALLEL_JOBS) $$($$(PKG)_BUILD_OPTS)
	endef
	else
	define $(2)_BUILD_CMDS
	$$(HOST_MAKE_ENV) $$($$(PKG)_BUILD_ENV) $$(BR2_CMAKE) --build $$($$(PKG)_BUILDDIR) -j$(PARALLEL_JOBS) $$($$(PKG)_BUILD_OPTS)
	endef
	endif
	endif

	#
	# Host installation step. Only define it if not already defined by the
	# package .mk file.
	#
	ifndef $(2)_INSTALL_CMDS
	define $(2)_INSTALL_CMDS
	$$(HOST_MAKE_ENV) $$($$(PKG)_BUILD_ENV) $$(BR2_CMAKE) --install $$($$(PKG)_BUILDDIR) $$($$(PKG)_INSTALL_OPTS)
	endef
	endif

	#
	# Staging installation step. Only define it if not already defined by
	# the package .mk file.
	#
	ifndef $(2)_INSTALL_STAGING_CMDS
	define $(2)_INSTALL_STAGING_CMDS
	$$(TARGET_MAKE_ENV) $$($$(PKG)_BUILD_ENV) DESTDIR=$$(STAGING_DIR) $$(BR2_CMAKE) --install $$($$(PKG)_BUILDDIR) $$($$(PKG)_INSTALL_STAGING_OPTS)
	endef
	endif

	#
	# Target installation step. Only define it if not already defined by
	# the package .mk file.
	#
	ifndef $(2)_INSTALL_TARGET_CMDS
	define $(2)_INSTALL_TARGET_CMDS
	$$(TARGET_MAKE_ENV) $$($$(PKG)_BUILD_ENV) DESTDIR=$$(TARGET_DIR) $$(BR2_CMAKE) --install $$($$(PKG)_BUILDDIR) $$($$(PKG)_INSTALL_TARGET_OPTS)
	endef
	endif

	# Call the generic package infrastructure to generate the necessary
	# make targets
	$(call inner-generic-package,$(1),$(2),$(3),$(4))

	endef

	################################################################################
	# cmake-package -- the target generator macro for CMake packages
	################################################################################

	cmake-package = $(call inner-cmake-package,$(pkgname),$(call UPPERCASE,$(pkgname)),$(call UPPERCASE,$(pkgname)),target)
	host-cmake-package = $(call inner-cmake-package,host-$(pkgname),$(call UPPERCASE,host-$(pkgname)),$(call UPPERCASE,$(pkgname)),host)

	################################################################################
	# Generation of the CMake toolchain file
	################################################################################

	# CMAKE_SYSTEM_PROCESSOR should match uname -m
	ifeq ($(BR2_ARM_CPU_ARMV4),y)
	CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT = armv4
	else ifeq ($(BR2_ARM_CPU_ARMV5),y)
	CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT = armv5
	else ifeq ($(BR2_ARM_CPU_ARMV6),y)
	CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT = armv6
	else ifeq ($(BR2_ARM_CPU_ARMV7A),y)
	CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT = armv7
	else ifeq ($(BR2_ARM_CPU_ARMV8A),y)
	CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT = armv8
	endif

	ifeq ($(BR2_arm),y)
	CMAKE_SYSTEM_PROCESSOR = $(CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT)l
	else ifeq ($(BR2_armeb),y)
	CMAKE_SYSTEM_PROCESSOR = $(CMAKE_SYSTEM_PROCESSOR_ARM_VARIANT)b
	else ifeq ($(call qstrip,$(BR2_ARCH)),powerpc64)
	CMAKE_SYSTEM_PROCESSOR = ppc64
	else ifeq ($(call qstrip,$(BR2_ARCH)),powerpc64le)
	CMAKE_SYSTEM_PROCESSOR = ppc64le
	else
	CMAKE_SYSTEM_PROCESSOR = $(BR2_ARCH)
	endif

	# In order to allow the toolchain to be relocated, we calculate the HOST_DIR
	# based on the toolchainfile.cmake file's location: $(HOST_DIR)/share/buildroot
	# In all the other variables, HOST_DIR will be replaced by RELOCATED_HOST_DIR,
	# so we have to strip "$(HOST_DIR)/" from the paths that contain it.
	define TOOLCHAIN_CMAKE_INSTALL_FILES
	@mkdir -p $(HOST_DIR)/share/buildroot
	sed \
	-e 's#@@STAGING_SUBDIR@@#$(call qstrip,$(STAGING_SUBDIR))#' \
	-e 's#@@TARGET_CFLAGS@@#$(call qstrip,$(TARGET_CFLAGS))#' \
	-e 's#@@TARGET_CXXFLAGS@@#$(call qstrip,$(TARGET_CXXFLAGS))#' \
	-e 's#@@TARGET_FCFLAGS@@#$(call qstrip,$(TARGET_FCFLAGS))#' \
	-e 's#@@TARGET_LDFLAGS@@#$(call qstrip,$(TARGET_LDFLAGS))#' \
	-e 's#@@TARGET_CC@@#$(subst $(HOST_DIR)/,,$(call qstrip,$(TARGET_CC)))#' \
	-e 's#@@TARGET_CXX@@#$(subst $(HOST_DIR)/,,$(call qstrip,$(TARGET_CXX)))#' \
	-e 's#@@TARGET_FC@@#$(subst $(HOST_DIR)/,,$(call qstrip,$(TARGET_FC)))#' \
	-e 's#@@CMAKE_SYSTEM_PROCESSOR@@#$(call qstrip,$(CMAKE_SYSTEM_PROCESSOR))#' \
	-e 's#@@TOOLCHAIN_HAS_CXX@@#$(if $(BR2_INSTALL_LIBSTDCPP),1,0)#' \
	-e 's#@@TOOLCHAIN_HAS_FORTRAN@@#$(if $(BR2_TOOLCHAIN_HAS_FORTRAN),1,0)#' \
	-e 's#@@CMAKE_BUILD_TYPE@@#$(if $(BR2_ENABLE_RUNTIME_DEBUG),Debug,Release)#' \
	$(TOPDIR)/support/misc/toolchainfile.cmake.in \
	> $(HOST_DIR)/share/buildroot/toolchainfile.cmake
	$(Q)$(INSTALL) -D -m 0644 support/misc/Buildroot.cmake \
	$(HOST_DIR)/share/buildroot/Platform/Buildroot.cmake
	endef

	TOOLCHAIN_POST_INSTALL_STAGING_HOOKS += TOOLCHAIN_CMAKE_INSTALL_FILES