| ifndef MAKE |
| MAKE := make |
| endif |
| ifndef HOSTMAKE |
| HOSTMAKE = $(MAKE) |
| endif |
| HOSTMAKE := $(shell which $(HOSTMAKE) || type -p $(HOSTMAKE) || echo make) |
| |
| # If BR2_JLEVEL is 0, scale the maximum concurrency with the number of |
| # CPUs. An additional job is used in order to keep processors busy |
| # while waiting on I/O. |
| # If the number of processors is not available, assume one. |
| ifeq ($(BR2_JLEVEL),0) |
| PARALLEL_JOBS := $(shell echo \ |
| $$((1 + `getconf _NPROCESSORS_ONLN 2>/dev/null || echo 1`))) |
| else |
| PARALLEL_JOBS := $(BR2_JLEVEL) |
| endif |
| |
| MAKE1 := $(HOSTMAKE) -j1 |
| override MAKE = $(HOSTMAKE) \ |
| $(if $(findstring j,$(filter-out --%,$(MAKEFLAGS))),,-j$(PARALLEL_JOBS)) |
| |
| ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y) |
| TARGET_VENDOR = $(call qstrip,$(BR2_TOOLCHAIN_BUILDROOT_VENDOR)) |
| else |
| TARGET_VENDOR = buildroot |
| endif |
| |
| # Sanity checks |
| ifeq ($(TARGET_VENDOR),) |
| $(error BR2_TOOLCHAIN_BUILDROOT_VENDOR is not allowed to be empty) |
| endif |
| ifeq ($(TARGET_VENDOR),unknown) |
| $(error BR2_TOOLCHAIN_BUILDROOT_VENDOR cannot be 'unknown'. \ |
| It might be confused with the native toolchain) |
| endif |
| |
| # Compute GNU_TARGET_NAME |
| GNU_TARGET_NAME = $(ARCH)-$(TARGET_VENDOR)-$(TARGET_OS)-$(LIBC)$(ABI) |
| |
| # FLAT binary format needs uclinux |
| ifeq ($(BR2_BINFMT_FLAT),y) |
| TARGET_OS = uclinux |
| else |
| TARGET_OS = linux |
| endif |
| |
| ifeq ($(BR2_TOOLCHAIN_USES_UCLIBC),y) |
| LIBC = uclibc |
| else ifeq ($(BR2_TOOLCHAIN_USES_MUSL),y) |
| LIBC = musl |
| else |
| LIBC = gnu |
| endif |
| |
| # The ABI suffix is a bit special on ARM, as it needs to be |
| # -uclibcgnueabi for uClibc EABI, and -gnueabi for glibc EABI. |
| # This means that the LIBC and ABI aren't strictly orthogonal, |
| # which explains why we need the test on LIBC below. |
| ifeq ($(BR2_arm)$(BR2_armeb),y) |
| ifeq ($(LIBC),uclibc) |
| ABI = gnueabi |
| else |
| ABI = eabi |
| endif |
| |
| ifeq ($(BR2_ARM_EABIHF),y) |
| ABI := $(ABI)hf |
| endif |
| endif |
| |
| # For FSL PowerPC there's SPE |
| ifeq ($(BR2_powerpc_SPE),y) |
| ABI = spe |
| # MPC8540s are e500v1 with single precision FP |
| ifeq ($(BR2_powerpc_8540),y) |
| TARGET_ABI += -mabi=spe -mfloat-gprs=single -Wa,-me500 |
| endif |
| ifeq ($(BR2_powerpc_8548),y) |
| TARGET_ABI += -mabi=spe -mfloat-gprs=double -Wa,-me500x2 |
| endif |
| ifeq ($(BR2_powerpc_e500mc),y) |
| TARGET_ABI += -mabi=spe -mfloat-gprs=double -Wa,-me500mc |
| endif |
| endif |
| |
| # Use longcalls option for Xtensa globally. |
| # The 'longcalls' option allows calls across a greater range of addresses, |
| # and is required for some packages. While this option can degrade both |
| # code size and performance, the linker can usually optimize away the |
| # overhead when a call ends up within a certain range. |
| # |
| # Use auto-litpools for Xtensa globally. |
| # Collecting literals into separate section can be advantageous if that |
| # section is placed into DTCM at link time. This is applicable for code |
| # running on bare metal, but makes no sense under linux, where userspace |
| # is isolated from the physical memory details. OTOH placing literals into |
| # separate section breaks build of huge source files, because l32r |
| # instruction can only access literals in 256 KBytes range. |
| # |
| ifeq ($(BR2_xtensa),y) |
| TARGET_ABI += -mlongcalls -mauto-litpools |
| endif |
| |
| ifeq ($(BR2_arc)$(BR2_ARC_ATOMIC_EXT),yy) |
| TARGET_ABI += -matomic |
| endif |
| |
| STAGING_SUBDIR = $(GNU_TARGET_NAME)/sysroot |
| STAGING_DIR = $(HOST_DIR)/$(STAGING_SUBDIR) |
| |
| ifeq ($(BR2_OPTIMIZE_0),y) |
| TARGET_OPTIMIZATION = -O0 |
| endif |
| ifeq ($(BR2_OPTIMIZE_1),y) |
| TARGET_OPTIMIZATION = -O1 |
| endif |
| ifeq ($(BR2_OPTIMIZE_2),y) |
| TARGET_OPTIMIZATION = -O2 |
| endif |
| ifeq ($(BR2_OPTIMIZE_3),y) |
| TARGET_OPTIMIZATION = -O3 |
| endif |
| ifeq ($(BR2_OPTIMIZE_G),y) |
| TARGET_OPTIMIZATION = -Og |
| endif |
| ifeq ($(BR2_OPTIMIZE_S),y) |
| TARGET_OPTIMIZATION = -Os |
| endif |
| ifeq ($(BR2_OPTIMIZE_FAST),y) |
| TARGET_OPTIMIZATION = -Ofast |
| endif |
| ifeq ($(BR2_DEBUG_1),y) |
| TARGET_DEBUGGING = -g1 |
| endif |
| ifeq ($(BR2_DEBUG_2),y) |
| TARGET_DEBUGGING = -g2 |
| endif |
| ifeq ($(BR2_DEBUG_3),y) |
| TARGET_DEBUGGING = -g3 |
| endif |
| |
| TARGET_LDFLAGS = $(call qstrip,$(BR2_TARGET_LDFLAGS)) |
| |
| # By design, _FORTIFY_SOURCE requires gcc optimization to be enabled. |
| # Therefore, we need to pass _FORTIFY_SOURCE and the optimization level |
| # through the same mechanism, i.e currently through CFLAGS. Passing |
| # _FORTIFY_SOURCE through the wrapper and the optimization level |
| # through CFLAGS would not work, because CFLAGS are sometimes |
| # ignored/overridden by packages, but the flags passed by the wrapper |
| # are enforced: this would cause _FORTIFY_SOURCE to be used without any |
| # optimization level, leading to a build / configure failure. So we keep |
| # passing _FORTIFY_SOURCE and the optimization level both through CFLAGS. |
| ifeq ($(BR2_FORTIFY_SOURCE_1),y) |
| TARGET_HARDENED += -D_FORTIFY_SOURCE=1 |
| else ifeq ($(BR2_FORTIFY_SOURCE_2),y) |
| TARGET_HARDENED += -D_FORTIFY_SOURCE=2 |
| endif |
| |
| TARGET_CPPFLAGS += -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 |
| TARGET_CFLAGS = $(TARGET_CPPFLAGS) $(TARGET_ABI) $(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING) $(TARGET_HARDENED) |
| TARGET_CXXFLAGS = $(TARGET_CFLAGS) |
| TARGET_FCFLAGS = $(TARGET_ABI) $(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING) |
| |
| ifeq ($(BR2_BINFMT_FLAT),y) |
| TARGET_CFLAGS += $(if $($(PKG)_FLAT_STACKSIZE),-Wl$(comma)-elf2flt=-s$($(PKG)_FLAT_STACKSIZE),\ |
| -Wl$(comma)-elf2flt) |
| TARGET_CXXFLAGS += $(if $($(PKG)_FLAT_STACKSIZE),-Wl$(comma)-elf2flt=-s$($(PKG)_FLAT_STACKSIZE),\ |
| -Wl$(comma)-elf2flt) |
| TARGET_FCFLAGS += $(if $($(PKG)_FLAT_STACKSIZE),-Wl$(comma)-elf2flt=-s$($(PKG)_FLAT_STACKSIZE),\ |
| -Wl$(comma)-elf2flt) |
| TARGET_LDFLAGS += $(if $($(PKG)_FLAT_STACKSIZE),-Wl$(comma)-elf2flt=-s$($(PKG)_FLAT_STACKSIZE),-Wl$(comma)-elf2flt) |
| endif |
| |
| ifeq ($(BR2_BINFMT_FLAT_SHARED),y) |
| TARGET_LDFLAGS += -mid-shared-library -mshared-library-id=0 |
| TARGET_CFLAGS += -mid-shared-library -mshared-library-id=0 |
| TARGET_FCFLAGS += -mid-shared-library -mshared-library-id=0 |
| TARGET_CXXFLAGS += -mid-shared-library -mshared-library-id=0 |
| endif |
| |
| ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y) |
| TARGET_CROSS = $(HOST_DIR)/bin/$(GNU_TARGET_NAME)- |
| else |
| TARGET_CROSS = $(HOST_DIR)/bin/$(TOOLCHAIN_EXTERNAL_PREFIX)- |
| endif |
| |
| # Define TARGET_xx variables for all common binutils/gcc |
| TARGET_AR = $(TARGET_CROSS)ar |
| TARGET_AS = $(TARGET_CROSS)as |
| TARGET_CC = $(TARGET_CROSS)gcc |
| TARGET_CPP = $(TARGET_CROSS)cpp |
| TARGET_CXX = $(TARGET_CROSS)g++ |
| TARGET_FC = $(TARGET_CROSS)gfortran |
| TARGET_LD = $(TARGET_CROSS)ld |
| TARGET_NM = $(TARGET_CROSS)nm |
| TARGET_RANLIB = $(TARGET_CROSS)ranlib |
| TARGET_READELF = $(TARGET_CROSS)readelf |
| TARGET_OBJCOPY = $(TARGET_CROSS)objcopy |
| TARGET_OBJDUMP = $(TARGET_CROSS)objdump |
| |
| ifeq ($(BR2_STRIP_strip),y) |
| STRIP_STRIP_DEBUG := --strip-debug |
| TARGET_STRIP = $(TARGET_CROSS)strip |
| STRIPCMD = $(TARGET_CROSS)strip --remove-section=.comment --remove-section=.note |
| else |
| TARGET_STRIP = /bin/true |
| STRIPCMD = $(TARGET_STRIP) |
| endif |
| INSTALL := $(shell which install || type -p install) |
| UNZIP := $(shell which unzip || type -p unzip) -q |
| |
| APPLY_PATCHES = PATH=$(HOST_DIR)/bin:$$PATH support/scripts/apply-patches.sh $(if $(QUIET),-s) |
| |
| HOST_CPPFLAGS = -I$(HOST_DIR)/include |
| HOST_CFLAGS ?= -O2 |
| HOST_CFLAGS += $(HOST_CPPFLAGS) |
| HOST_CXXFLAGS += $(HOST_CFLAGS) |
| HOST_LDFLAGS += -L$(HOST_DIR)/lib -Wl,-rpath,$(HOST_DIR)/lib |
| |
| # The macros below are taken from linux 4.11 and adapted slightly. |
| # Copy more when needed. |
| |
| # try-run |
| # Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise) |
| # Exit code chooses option. "$$TMP" is can be used as temporary file and |
| # is automatically cleaned up. |
| try-run = $(shell set -e; \ |
| TMP="$$(mktemp)"; \ |
| if ($(1)) >/dev/null 2>&1; \ |
| then echo "$(2)"; \ |
| else echo "$(3)"; \ |
| fi; \ |
| rm -f "$$TMP") |
| |
| # host-cc-option |
| # Usage: HOST_FOO_CFLAGS += $(call host-cc-option,-no-pie,) |
| host-cc-option = $(call try-run,\ |
| $(HOSTCC) $(HOST_CFLAGS) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2)) |
| |
| |
| # host-intltool should be executed with the system perl, so we save |
| # the path to the system perl, before a host-perl built by Buildroot |
| # might get installed into $(HOST_DIR)/bin and therefore appears |
| # in our PATH. This system perl will be used as INTLTOOL_PERL. |
| export PERL=$(shell which perl) |
| |
| # host-intltool needs libxml-parser-perl, which Buildroot installs in |
| # $(HOST_DIR)/lib/perl, so we must make sure that the system perl |
| # finds this perl module by exporting the proper value for PERL5LIB. |
| export PERL5LIB=$(HOST_DIR)/lib/perl |
| |
| TARGET_MAKE_ENV = PATH=$(BR_PATH) |
| |
| TARGET_CONFIGURE_OPTS = \ |
| $(TARGET_MAKE_ENV) \ |
| AR="$(TARGET_AR)" \ |
| AS="$(TARGET_AS)" \ |
| LD="$(TARGET_LD)" \ |
| NM="$(TARGET_NM)" \ |
| CC="$(TARGET_CC)" \ |
| GCC="$(TARGET_CC)" \ |
| CPP="$(TARGET_CPP)" \ |
| CXX="$(TARGET_CXX)" \ |
| FC="$(TARGET_FC)" \ |
| F77="$(TARGET_FC)" \ |
| RANLIB="$(TARGET_RANLIB)" \ |
| READELF="$(TARGET_READELF)" \ |
| STRIP="$(TARGET_STRIP)" \ |
| OBJCOPY="$(TARGET_OBJCOPY)" \ |
| OBJDUMP="$(TARGET_OBJDUMP)" \ |
| AR_FOR_BUILD="$(HOSTAR)" \ |
| AS_FOR_BUILD="$(HOSTAS)" \ |
| CC_FOR_BUILD="$(HOSTCC)" \ |
| GCC_FOR_BUILD="$(HOSTCC)" \ |
| CXX_FOR_BUILD="$(HOSTCXX)" \ |
| LD_FOR_BUILD="$(HOSTLD)" \ |
| CPPFLAGS_FOR_BUILD="$(HOST_CPPFLAGS)" \ |
| CFLAGS_FOR_BUILD="$(HOST_CFLAGS)" \ |
| CXXFLAGS_FOR_BUILD="$(HOST_CXXFLAGS)" \ |
| LDFLAGS_FOR_BUILD="$(HOST_LDFLAGS)" \ |
| FCFLAGS_FOR_BUILD="$(HOST_FCFLAGS)" \ |
| DEFAULT_ASSEMBLER="$(TARGET_AS)" \ |
| DEFAULT_LINKER="$(TARGET_LD)" \ |
| CPPFLAGS="$(TARGET_CPPFLAGS)" \ |
| CFLAGS="$(TARGET_CFLAGS)" \ |
| CXXFLAGS="$(TARGET_CXXFLAGS)" \ |
| LDFLAGS="$(TARGET_LDFLAGS)" \ |
| FCFLAGS="$(TARGET_FCFLAGS)" \ |
| FFLAGS="$(TARGET_FCFLAGS)" \ |
| PKG_CONFIG="$(PKG_CONFIG_HOST_BINARY)" \ |
| STAGING_DIR="$(STAGING_DIR)" \ |
| INTLTOOL_PERL=$(PERL) |
| |
| |
| HOST_MAKE_ENV = \ |
| PATH=$(BR_PATH) \ |
| PKG_CONFIG="$(PKG_CONFIG_HOST_BINARY)" \ |
| PKG_CONFIG_SYSROOT_DIR="/" \ |
| PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 \ |
| PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 \ |
| PKG_CONFIG_LIBDIR="$(HOST_DIR)/lib/pkgconfig:$(HOST_DIR)/share/pkgconfig" |
| |
| HOST_CONFIGURE_OPTS = \ |
| $(HOST_MAKE_ENV) \ |
| AR="$(HOSTAR)" \ |
| AS="$(HOSTAS)" \ |
| LD="$(HOSTLD)" \ |
| NM="$(HOSTNM)" \ |
| CC="$(HOSTCC)" \ |
| GCC="$(HOSTCC)" \ |
| CXX="$(HOSTCXX)" \ |
| CPP="$(HOSTCPP)" \ |
| OBJCOPY="$(HOSTOBJCOPY)" \ |
| RANLIB="$(HOSTRANLIB)" \ |
| CPPFLAGS="$(HOST_CPPFLAGS)" \ |
| CFLAGS="$(HOST_CFLAGS)" \ |
| CXXFLAGS="$(HOST_CXXFLAGS)" \ |
| LDFLAGS="$(HOST_LDFLAGS)" \ |
| INTLTOOL_PERL=$(PERL) |
| |
| # This is extra environment we can not export ourselves (eg. because some |
| # packages use that variable internally, eg. uboot), so we have to |
| # explicitly pass it to user-supplied external hooks (eg. post-build, |
| # post-images) |
| EXTRA_ENV = \ |
| PATH=$(BR_PATH) \ |
| BR2_DL_DIR=$(BR2_DL_DIR) \ |
| BUILD_DIR=$(BUILD_DIR) \ |
| O=$(CANONICAL_O) |
| |
| ################################################################################ |
| # settings we need to pass to configure |
| |
| # does unaligned access trap? |
| BR2_AC_CV_TRAP_CHECK = ac_cv_lbl_unaligned_fail=yes |
| ifeq ($(BR2_i386),y) |
| BR2_AC_CV_TRAP_CHECK = ac_cv_lbl_unaligned_fail=no |
| endif |
| ifeq ($(BR2_x86_64),y) |
| BR2_AC_CV_TRAP_CHECK = ac_cv_lbl_unaligned_fail=no |
| endif |
| ifeq ($(BR2_m68k),y) |
| BR2_AC_CV_TRAP_CHECK = ac_cv_lbl_unaligned_fail=no |
| endif |
| ifeq ($(BR2_powerpc)$(BR2_powerpc64)$(BR2_powerpc64le),y) |
| BR2_AC_CV_TRAP_CHECK = ac_cv_lbl_unaligned_fail=no |
| endif |
| |
| ifeq ($(BR2_ENDIAN),"BIG") |
| BR2_AC_CV_C_BIGENDIAN = ac_cv_c_bigendian=yes |
| else |
| BR2_AC_CV_C_BIGENDIAN = ac_cv_c_bigendian=no |
| endif |
| |
| # AM_GNU_GETTEXT misdetects musl gettext support. |
| # musl currently implements api level 1 and 2 (basic + ngettext) |
| # http://www.openwall.com/lists/musl/2015/04/16/3 |
| # |
| # These autoconf variables should only be pre-seeded when the minimal |
| # gettext implementation of musl is used. When the full blown |
| # implementation provided by gettext libintl is used, auto-detection |
| # works fine, and pre-seeding those values is actually wrong. |
| ifeq ($(BR2_TOOLCHAIN_USES_MUSL):$(BR2_PACKAGE_GETTEXT_PROVIDES_LIBINTL),y:) |
| BR2_GT_CV_FUNC_GNUGETTEXT_LIBC = \ |
| gt_cv_func_gnugettext1_libc=yes \ |
| gt_cv_func_gnugettext2_libc=yes |
| endif |
| |
| TARGET_CONFIGURE_ARGS = \ |
| $(BR2_AC_CV_TRAP_CHECK) \ |
| ac_cv_func_mmap_fixed_mapped=yes \ |
| ac_cv_func_memcmp_working=yes \ |
| ac_cv_have_decl_malloc=yes \ |
| gl_cv_func_malloc_0_nonnull=yes \ |
| ac_cv_func_malloc_0_nonnull=yes \ |
| ac_cv_func_calloc_0_nonnull=yes \ |
| ac_cv_func_realloc_0_nonnull=yes \ |
| lt_cv_sys_lib_search_path_spec="" \ |
| $(BR2_AC_CV_C_BIGENDIAN) \ |
| $(BR2_GT_CV_FUNC_GNUGETTEXT_LIBC) |
| |
| ################################################################################ |
| |
| ifeq ($(BR2_SYSTEM_ENABLE_NLS),y) |
| NLS_OPTS = --enable-nls |
| TARGET_NLS_DEPENDENCIES = host-gettext |
| ifeq ($(BR2_PACKAGE_GETTEXT_PROVIDES_LIBINTL),y) |
| TARGET_NLS_DEPENDENCIES += gettext |
| TARGET_NLS_LIBS += -lintl |
| endif |
| else |
| NLS_OPTS = --disable-nls |
| endif |
| |
| # We need anything that is invalid. Traditionally, we'd have used 'false' (and |
| # we did so in the past). However, that breaks libtool for packages that have |
| # optional C++ support (e.g. gnutls), because libtool will *require* a *valid* |
| # C++ preprocessor as long as CXX is not 'no'. |
| # Now, whether we use 'no' or 'false' for CXX as the same side effect: it is an |
| # invalid C++ compiler, and thus will cause detection of C++ to fail (which is |
| # expected and what we want), while at the same time taming libtool into |
| # silence. |
| ifneq ($(BR2_INSTALL_LIBSTDCPP),y) |
| TARGET_CONFIGURE_OPTS += CXX=no |
| endif |
| |
| ifeq ($(BR2_STATIC_LIBS),y) |
| SHARED_STATIC_LIBS_OPTS = --enable-static --disable-shared |
| TARGET_CFLAGS += -static |
| TARGET_CXXFLAGS += -static |
| TARGET_FCFLAGS += -static |
| TARGET_LDFLAGS += -static |
| else ifeq ($(BR2_SHARED_LIBS),y) |
| SHARED_STATIC_LIBS_OPTS = --disable-static --enable-shared |
| else ifeq ($(BR2_SHARED_STATIC_LIBS),y) |
| SHARED_STATIC_LIBS_OPTS = --enable-static --enable-shared |
| endif |
| |
| ifeq ($(BR2_COMPILER_PARANOID_UNSAFE_PATH),y) |
| export BR_COMPILER_PARANOID_UNSAFE_PATH=enabled |
| endif |
| |
| include package/pkg-download.mk |
| include package/pkg-autotools.mk |
| include package/pkg-cmake.mk |
| include package/pkg-luarocks.mk |
| include package/pkg-perl.mk |
| include package/pkg-python.mk |
| include package/pkg-virtual.mk |
| include package/pkg-generic.mk |
| include package/pkg-kconfig.mk |
| include package/pkg-rebar.mk |
| include package/pkg-kernel-module.mk |
| include package/pkg-waf.mk |
| include package/pkg-golang.mk |
| include package/pkg-meson.mk |
