| Intro |
| ===== |
| |
| NanoPi Neo4 is a RK3399 SoC based ARM64 board. |
| |
| |
| Official wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO4 |
| Mainline wiki: https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/neo4.html |
| |
| Build |
| ===== |
| |
| Run NanoPi Neo4 configuration |
| |
| $ make nanopi_neo4_defconfig |
| |
| To build, run make comamnd. |
| |
| $ make |
| |
| Files created in output directory |
| ================================= |
| |
| output/images |
| |
| ├── bl31.bin |
| ├── bl31.elf |
| ├── Image |
| ├── rk3399-nanopi-neo4.dtb |
| ├── rootfs.ext2 |
| ├── rootfs.ext4 -> rootfs.ext2 |
| ├── rootfs.tar |
| ├── sdcard.img |
| ├── u-boot.bin |
| ├── u-boot.itb |
| ├── u-boot-spl-dtb.bin |
| ├── u-boot-tpl-dtb.bin |
| ├── u-boot-tpl-dtb.img |
| └── u-boot-tpl-spl-dtb.img |
| |
| Creating bootable SD card: |
| ========================= |
| |
| Simply invoke (as root) |
| |
| # dd if=output/images/sdcard.img of=/dev/sdX && sync |
| |
| Where X is your SD card device |
| |
| Serial console |
| -------------- |
| |
| Baudrate for this board is 1500000 |
