| A13-OLinuXino |
| |
| Intro |
| ===== |
| |
| This default configuration will allow you to start experimenting with |
| the buildroot environment for the A13-OLinuXino. With the current |
| configuration it will bring-up the board, and allow access through the |
| serial console. |
| |
| For more details about the A13-OLinuXino: |
| |
| https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/open-source-hardware |
| |
| How to build it |
| =============== |
| |
| Configure Buildroot: |
| |
| $ make olimex_a13_olinuxino_defconfig |
| |
| Compile everything and build the rootfs image: |
| |
| $ make |
| |
| Note: you will need access to the internet to download the required |
| sources. |
| |
| How to write the SD card |
| ======================== |
| |
| The sdcard.img file is a complete bootable image ready to be written |
| on the boot medium. To install it, simply copy the image to a micro SD |
| card: |
| |
| # dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Notes: |
| - replace 'sdX' with the actual device with your micro SDcard, |
| - you may need to be root to do that (use 'sudo'). |
| |
| Eject the SD card, insert it in the A13-OLinuXino board, and power it |
| up. |
