| menu "Linux Kernel Extensions" |
| |
| #------------------------------------------------------------------------------- |
| # Xenomai |
| config BR2_LINUX_KERNEL_EXT_XENOMAI |
| bool "Adeos/Xenomai Real-time patch" |
| depends on BR2_PACKAGE_XENOMAI_ARCH_SUPPORTS |
| depends on BR2_TOOLCHAIN_HAS_THREADS |
| depends on !BR2_TOOLCHAIN_USES_MUSL |
| select BR2_PACKAGE_XENOMAI |
| help |
| Xenomai is split in two parts: a kernel part and a userspace |
| part. Enabling this option automatically selects the Xenomai |
| package and helps in patching the Linux kernel built by |
| Buildroot with the Xenomai kernel part (ie Adeos/Ipipe). |
| |
| You can find the currently supported kernel versions by |
| looking at the available patches in the Xenomai sources |
| tree: ksrc/arch/$(ARCH)/patches |
| |
| However, it is recommended to use the latest version of the |
| Adeos/Ipipe patch available at |
| http://download.gna.org/adeos/patches |
| |
| Xenomai is know to support Blackfin, SH4, x86, ARM, NIOS2 |
| and PowerPC architectures. |
| |
| config BR2_LINUX_KERNEL_EXT_XENOMAI_ADEOS_PATCH |
| string "Path for Adeos patch file" |
| depends on BR2_LINUX_KERNEL_EXT_XENOMAI |
| help |
| Optionally, explicitly specify the Adeos patch to use. |
| Download it at http://download.gna.org/adeos/patches |
| and verify that your kernel version in buildroot matches. |
| |
| comment "xenomai needs a uClibc or glibc toolchain w/ threads" |
| depends on BR2_PACKAGE_XENOMAI_ARCH_SUPPORTS |
| depends on !BR2_TOOLCHAIN_HAS_THREADS || BR2_TOOLCHAIN_USES_MUSL |
| |
| #------------------------------------------------------------------------------- |
| # RTAI |
| config BR2_LINUX_KERNEL_EXT_RTAI |
| bool "RTAI Real-time patch" |
| select BR2_PACKAGE_RTAI |
| help |
| RTAI Kernel part. |
| |
| #------------------------------------------------------------------------------- |
| # ev3dev Linux drivers |
| config BR2_LINUX_KERNEL_EXT_EV3DEV_LINUX_DRIVERS |
| bool "ev3dev Linux drivers" |
| select BR2_PACKAGE_EV3DEV_LINUX_DRIVERS |
| help |
| Linux drivers for LEGO MINDSTORMS EV3 from the ev3dev project. |
| |
| https://github.com/ev3dev/lego-linux-drivers |
| |
| #------------------------------------------------------------------------------- |
| # fbtft |
| config BR2_LINUX_KERNEL_EXT_FBTFT |
| bool "FB TFT drivers" |
| select BR2_PACKAGE_FBTFT |
| help |
| Linux Framebuffer drivers for small TFT LCD display modules, |
| e.g. Adafruit PiTFT displays for Raspberry Pi (this extra |
| package is only needed for linux kernels until v3.19, since |
| v4.0 the drivers are included in the staging area). |
| |
| To enable fbtft, e.g. for Adafruit 2.8 PiTFT, enable the |
| following kernel configurations: |
| - CONFIG_SPI |
| - CONFIG_GPIOLIB |
| - CONFIG_FB |
| - CONFIG_FB_TFT |
| - CONFIG_FB_TFT_ILI9341 |
| |
| https://github.com/notro/fbtft |
| |
| # aufs-standalone |
| config BR2_LINUX_KERNEL_EXT_AUFS |
| bool "Aufs Filesystem Module patch" |
| select BR2_PACKAGE_AUFS |
| help |
| Aufs is split in two parts: a kernel part and a userspace |
| part. Enabling this option automatically selects the aufs |
| standalone (module) package and patches the Linux kernel |
| built by Buildroot with the aufs kernel part (ie fs/aufs). |
| |
| It is important to use the correct branch of aufs-standalone. |
| |
| if BR2_LINUX_KERNEL_EXT_AUFS |
| |
| choice |
| bool "aufs-standalone series" |
| help |
| Select the major series of this version. This must match the |
| major version of your kernel (e.g. for kernels 3.x, select |
| aufs3.x; for kernels 4.x, select aufs4.x). |
| |
| Note: neither aufs1.x nor aufs2.x (both for kernels older than |
| 3.x) are supported. |
| |
| config BR2_LINUX_KERNEL_EXT_AUFS_SERIES_3 |
| bool "aufs3.x" |
| |
| config BR2_LINUX_KERNEL_EXT_AUFS_SERIES_4 |
| bool "aufs4.x" |
| |
| endchoice |
| |
| config BR2_LINUX_KERNEL_EXT_AUFS_SERIES |
| int |
| default 3 if BR2_LINUX_KERNEL_EXT_AUFS_SERIES_3 |
| default 4 if BR2_LINUX_KERNEL_EXT_AUFS_SERIES_4 |
| |
| config BR2_LINUX_KERNEL_EXT_AUFS_VERSION |
| string "aufs-standalone version" |
| default "" |
| help |
| The version you choose must match that of your kernel. Usually, |
| the sha1 of the cset you want to use; avoid using a branch name |
| as this yields non-reproducible builds. |
| |
| See the following resources to see what versions are available: |
| |
| For aufs3.x: https://sourceforge.net/p/aufs/aufs3-standalone/ref/master/branches/ |
| For aufs4.x: https://github.com/sfjro/aufs4-standalone/branches/all |
| |
| endif # aufs |
| |
| endmenu |
