| STMP157-OLinuXino-LIME2 |
| |
| Intro |
| ===== |
| |
| These are open hardware boards, all based on the STmicro STMP157 SoC. |
| |
| for more details about the board see the following pages: |
| - https://www.olimex.com/Products/OLinuXino/open-source-hardware |
| - https://www.olimex.com/Products/OLinuXino/STMP1/STMP157-OLinuXino-LIME2/ |
| |
| The following defconfigs are available: |
| - olimex_stmp157_olinuxino_lime_defconfig |
| |
| How to build it |
| =============== |
| |
| Configure Buildroot: |
| |
| $ make <board>_defconfig |
| |
| Compile everything and build the rootfs image: |
| |
| $ make |
| |
| Result of the build |
| ------------------- |
| |
| After building, you should get a tree like this: |
| |
| output/images/ |
| +-- rootfs.ext2 |
| +-- rootfs.ext4 -> rootfs.ext2 |
| +-- sdcard.img |
| +-- stm32mp1xx-olinuxino-lime.dtb |
| +-- u-boot-spl.stm32 |
| +-- u-boot.img |
| `-- zImage |
| |
| |
| How to write the SD card |
| ======================== |
| |
| The sdcard.img file is a complete bootable image ready to be written |
| on the boot medium. To install it, simply copy the image to a uSD |
| card: |
| |
| # dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Where 'sdX' is the device node of the uSD. |
| |
| Eject the SD card, insert it in the STMP1-OLinuXino board, and power it up. |
| |
