| pcDuino v1 boards (http://www.linksprite.com/linksprite-pcduino) |
| |
| Intro |
| ===== |
| |
| This default configuration will allow you to start experimenting |
| with the buildroot environment for the LinkSprite pcDuino v1 board |
| including its flavors pcDuino-Lite and pcDuino-Lite-WiFi. With the |
| current configuration it will bring-up the board and allow access |
| through the serial console as well as ethernet and wireless |
| network interfaces. |
| |
| How to build it |
| =============== |
| |
| Configure Buildroot: |
| |
| $ make linksprite_pcduino_defconfig |
| |
| Modify configuration if needed, e.g. add more packages to target: |
| |
| $ make menuconfig |
| |
| Compile everything and build the SD card image: |
| |
| $ make |
| |
| How to write the SD card |
| ======================== |
| |
| Once the build process is finished you will have an image |
| called "sdcard.img" in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an SD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| |
| How to boot new image |
| ===================== |
| |
| Insert SD card and reset the board. By default pcDuino board |
| boots from SD card. |
