| ODROIDXU-UBOOT-CONFIG |
| |
| # U-Boot Parameters |
| setenv initrd_high "0xffffffff" |
| setenv fdt_high "0xffffffff" |
| |
| setenv macaddr "00:1e:06:61:7a:39" |
| setenv bootrootfs "console=tty1 root=/dev/mmcblk1p2 rootwait rw fsck.repair=yes net.ifnames=0" |
| setenv bootcmd "load mmc 0:1 0x40008000 zImage; load mmc 0:1 0x44000000 exynos5422-odroidxu4.dtb; bootz 0x40008000 - 0x44000000" |
| setenv vout "hdmi" |
| setenv governor "performance" |
| setenv HPD "true" |
| |
| # TMDS data amplitude control. |
| setenv hdmi_tx_amp_lvl "31" |
| |
| # TMDS data amplitude fine control for each channel. |
| setenv hdmi_tx_lvl_ch0 "3" |
| setenv hdmi_tx_lvl_ch1 "3" |
| setenv hdmi_tx_lvl_ch2 "3" |
| |
| # TMDS data pre-emphasis level control. |
| setenv hdmi_tx_emp_lvl "6" |
| |
| # TMDS clock amplitude control. |
| setenv hdmi_clk_amp_lvl "31" |
| |
| # TMDS data source termination resistor control. |
| setenv hdmi_tx_res "0" |
| |
| setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}" |
| |
| # final boot args |
| setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control}" |
| |
| # Boot the board |
| boot |
| |
