| # Architecture |
| BR2_x86_64=y |
| |
| # Toolchain, required for eudev (to autoload drivers) |
| BR2_TOOLCHAIN_BUILDROOT_WCHAR=y |
| |
| # System |
| BR2_TARGET_GENERIC_GETTY_PORT="tty1" |
| BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y |
| |
| # Required tools to create bootable media |
| BR2_PACKAGE_HOST_DOSFSTOOLS=y |
| BR2_PACKAGE_HOST_GENIMAGE=y |
| BR2_PACKAGE_HOST_MTOOLS=y |
| |
| # Bootloader |
| BR2_TARGET_GRUB2=y |
| BR2_TARGET_GRUB2_X86_64_EFI=y |
| |
| # Filesystem / image |
| BR2_TARGET_ROOTFS_EXT2=y |
| BR2_TARGET_ROOTFS_EXT2_4=y |
| BR2_TARGET_ROOTFS_EXT2_SIZE="120M" |
| # BR2_TARGET_ROOTFS_TAR is not set |
| BR2_ROOTFS_POST_BUILD_SCRIPT="board/pc/post-build.sh" |
| BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image-efi.sh" |
| |
| # Linux headers same as kernel, a 4.18 series |
| BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_18=y |
| |
| # Kernel |
| BR2_LINUX_KERNEL=y |
| BR2_LINUX_KERNEL_CUSTOM_VERSION=y |
| BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.18.10" |
| BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y |
| BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/pc/linux.config" |
| BR2_LINUX_KERNEL_INSTALL_TARGET=y |
| BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y |
| |
| # Firmware |
| BR2_PACKAGE_LINUX_FIRMWARE=y |
| BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9170=y |
| BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_9271=y |
| BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160=y |
| BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3168=y |
| BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_5000=y |
| BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2A=y |
| BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_6000G2B=y |
| BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7260=y |
| BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_7265D=y |
| BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8000C=y |
| BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_8265=y |
| BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT73=y |
| BR2_PACKAGE_LINUX_FIRMWARE_RALINK_RT2XX=y |
| BR2_PACKAGE_LINUX_FIRMWARE_RTL_8169=y |
| BR2_PACKAGE_LINUX_FIRMWARE_RTL_81XX=y |
| BR2_PACKAGE_LINUX_FIRMWARE_RTL_87XX=y |
| BR2_PACKAGE_LINUX_FIRMWARE_RTL_88XX=y |
| |
| # Packages |
| # |
| # Use connman so that networking setup is simpler, via connmanctl tool |
| # acpid is for seamless power button support |
| BR2_PACKAGE_ACPID=y |
| BR2_PACKAGE_CONNMAN=y |
| BR2_PACKAGE_CONNMAN_CLIENT=y |
| BR2_PACKAGE_CONNMAN_WIFI=y |
