| STM32F429 Discovery |
| =================== |
| |
| This tutorial describes how to use the predefined Buildroot |
| configuration for the STM32F429 Discovery evaluation platform. |
| |
| Supported HW |
| ------------ |
| |
| - STM32F429I-DISCO evaluation board |
| - STM32F429I-DISC1 evaluation board |
| |
| Building |
| -------- |
| |
| make stm32f429_disco_defconfig |
| make |
| |
| Wire the UART |
| ------------- |
| |
| Use a USB to TTL adapter, and connect: |
| |
| - RX to PA9 |
| - TX to PA10 |
| - GND to one of the GND available on the board |
| |
| The UART is configured at 115200. |
| |
| Flashing |
| -------- |
| |
| ./board/stmicroelectronics/stm32f429-disco/flash.sh output/ \ |
| {stm32f429discovery|stm32f429disc1} |
| |
| It will flash the minimal bootloader, the Device Tree Blob, and the |
| kernel image which includes the root filesystem as initramfs. |
