blob: ff62bcf6145e5c8f27c06f6b3e7075fb5c0b2d14 [file] [log] [blame]
menu "Kernel"
config BR2_LINUX_KERNEL
bool "Linux Kernel"
help
Enable this option if you want to build a Linux kernel for
your embedded device
if BR2_LINUX_KERNEL
# Packages that need to have a kernel with support for loadable modules,
# but do not use the kernel-modules infrastructure, should select that
# option.
config BR2_LINUX_NEEDS_MODULES
bool
#
# Version selection. We provide the choice between:
#
# 1. A single fairly recent stable kernel version
# 2. In case an internal toolchain has been built, the same kernel
# version as the kernel headers
# 3. A custom stable version
# 4. A custom tarball
#
choice
prompt "Kernel version"
config BR2_LINUX_KERNEL_LATEST_VERSION
bool "Latest version (4.5.4)"
config BR2_LINUX_KERNEL_CUSTOM_VERSION
bool "Custom version"
help
This option allows to use a specific official version from
kernel.org, like 2.6.x, 2.6.x.y, 3.x.y, ...
Note: you cannot use this option to select a _longterm_ 2.6
kernel, because these kernels are not located at the standard
URL at kernel.org. Instead, select "Custom tarball" and
specify the right URL directly.
config BR2_LINUX_KERNEL_CUSTOM_TARBALL
bool "Custom tarball"
help
This option allows to specify a URL pointing to a kernel source
tarball. This URL can use any protocol recognized by Buildroot,
like http://, ftp://, file:// or scp://.
When pointing to a local tarball using file://, you may want to
use a make variable like $(TOPDIR) to reference the root of the
Buildroot tree.
config BR2_LINUX_KERNEL_CUSTOM_GIT
bool "Custom Git repository"
help
This option allows Buildroot to get the Linux kernel source
code from a Git repository.
config BR2_LINUX_KERNEL_CUSTOM_HG
bool "Custom Mercurial repository"
help
This option allows Buildroot to get the Linux kernel source
code from a Mercurial repository.
config BR2_LINUX_KERNEL_CUSTOM_SVN
bool "Custom Subversion repository"
help
This option allows Buildroot to get the Linux kernel source
code from a Subversion repository.
config BR2_LINUX_KERNEL_CUSTOM_LOCAL
bool "Local directory"
help
This option allows Buildroot to get the Linux kernel source
code from a local directory.
endchoice
config BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE
string "Kernel version"
depends on BR2_LINUX_KERNEL_CUSTOM_VERSION
config BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION
string "URL of custom kernel tarball"
depends on BR2_LINUX_KERNEL_CUSTOM_TARBALL
if BR2_LINUX_KERNEL_CUSTOM_GIT || BR2_LINUX_KERNEL_CUSTOM_HG || BR2_LINUX_KERNEL_CUSTOM_SVN
config BR2_LINUX_KERNEL_CUSTOM_REPO_URL
string "URL of custom repository"
default BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL \
if BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL != "" # legacy
config BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION
string "Custom repository version"
default BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION \
if BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION != "" # legacy
help
Revision to use in the typical format used by Git/Mercurial/Subversion
E.G. a sha id, a tag, branch, ..
endif
config BR2_LINUX_KERNEL_CUSTOM_LOCAL_PATH
string "Path to the local directory"
depends on BR2_LINUX_KERNEL_CUSTOM_LOCAL
help
Path to the local directory with the Linux kernel source code.
config BR2_LINUX_KERNEL_VERSION
string
default "4.5.4" if BR2_LINUX_KERNEL_LATEST_VERSION
default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \
if BR2_LINUX_KERNEL_CUSTOM_VERSION
default "custom" if BR2_LINUX_KERNEL_CUSTOM_TARBALL
default BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION \
if BR2_LINUX_KERNEL_CUSTOM_GIT || BR2_LINUX_KERNEL_CUSTOM_HG || BR2_LINUX_KERNEL_CUSTOM_SVN
default "custom" if BR2_LINUX_KERNEL_CUSTOM_LOCAL
#
# Patch selection
#
config BR2_LINUX_KERNEL_PATCH
string "Custom kernel patches"
depends on !BR2_LINUX_KERNEL_CUSTOM_LOCAL
help
A space-separated list of patches to apply to the
kernel. Each patch can be described as an URL, a local file
path, or a directory. In the case of a directory, all files
matching *.patch in the directory will be applied.
#
# Configuration selection
#
choice
prompt "Kernel configuration"
default BR2_LINUX_KERNEL_USE_DEFCONFIG
config BR2_LINUX_KERNEL_USE_DEFCONFIG
bool "Using an in-tree defconfig file"
config BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG
bool "Using a custom (def)config file"
endchoice
config BR2_LINUX_KERNEL_DEFCONFIG
string "Defconfig name"
depends on BR2_LINUX_KERNEL_USE_DEFCONFIG
help
Name of the kernel defconfig file to use, without the
trailing _defconfig. The defconfig is located in
arch/<arch>/configs in the kernel tree.
config BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE
string "Configuration file path"
depends on BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG
help
Path to the kernel configuration file
Note: this can be a defconfig file or a complete .config file,
which can later be saved back with make linux-update-(def)config.
config BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES
string "Additional configuration fragment files"
help
A space-separated list of kernel configuration fragment files,
that will be merged to the main kernel configuration file.
#
# Binary format
#
config BR2_LINUX_KERNEL_UBOOT_IMAGE
bool
choice
prompt "Kernel binary format"
default BR2_LINUX_KERNEL_ZIMAGE if BR2_arm || BR2_armeb
config BR2_LINUX_KERNEL_UIMAGE
bool "uImage"
depends on BR2_arc || BR2_arm || BR2_armeb || BR2_bfin || \
BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le || \
BR2_sh || BR2_sh64 || BR2_mips || BR2_mipsel || \
BR2_mips64 || BR2_mips64el
select BR2_LINUX_KERNEL_UBOOT_IMAGE
config BR2_LINUX_KERNEL_APPENDED_UIMAGE
bool "uImage with appended DT"
depends on BR2_arm || BR2_armeb
select BR2_LINUX_KERNEL_DTS_SUPPORT
select BR2_LINUX_KERNEL_APPENDED_DTB
select BR2_LINUX_KERNEL_UBOOT_IMAGE
config BR2_LINUX_KERNEL_BZIMAGE
bool "bzImage"
depends on BR2_i386 || BR2_x86_64
config BR2_LINUX_KERNEL_ZIMAGE
bool "zImage"
depends on BR2_arm || BR2_armeb || BR2_powerpc || \
BR2_powerpc64 || BR2_powerpc64le || BR2_sparc || \
BR2_sh || BR2_sh64 || BR2_xtensa
config BR2_LINUX_KERNEL_ZIMAGE_EPAPR
bool "zImage.epapr"
depends on BR2_powerpc64 || BR2_powerpc64le
config BR2_LINUX_KERNEL_APPENDED_ZIMAGE
bool "zImage with appended DT"
depends on BR2_arm || BR2_armeb
select BR2_LINUX_KERNEL_DTS_SUPPORT
select BR2_LINUX_KERNEL_APPENDED_DTB
config BR2_LINUX_KERNEL_CUIMAGE
bool "cuImage"
depends on BR2_powerpc
select BR2_LINUX_KERNEL_UBOOT_IMAGE
select BR2_LINUX_KERNEL_DTS_SUPPORT
select BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT
config BR2_LINUX_KERNEL_SIMPLEIMAGE
bool "simpleImage"
depends on BR2_microblaze
select BR2_LINUX_KERNEL_UBOOT_IMAGE
select BR2_LINUX_KERNEL_DTS_SUPPORT
select BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT
config BR2_LINUX_KERNEL_IMAGE
bool "Image"
depends on BR2_aarch64
config BR2_LINUX_KERNEL_LINUX_BIN
bool "linux.bin"
depends on BR2_microblaze
select BR2_LINUX_KERNEL_UBOOT_IMAGE
config BR2_LINUX_KERNEL_VMLINUX_BIN
bool "vmlinux.bin"
depends on BR2_mips || BR2_mipsel || BR2_sh || BR2_sh64
config BR2_LINUX_KERNEL_VMLINUX
bool "vmlinux"
config BR2_LINUX_KERNEL_VMLINUZ
bool "vmlinuz"
depends on BR2_mips || BR2_mipsel
config BR2_LINUX_KERNEL_VMLINUZ_BIN
bool "vmlinuz.bin"
depends on BR2_mips || BR2_mipsel
config BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM
bool "custom target"
help
For certain cases a board-specific target image must be
used. For example, on powerPC where the OpenFirmware
description is attached in a board-specific kernel image
target like 'cuImage.mpc8379_rdb'.
Select this option and specify the make target in "Kernel
image target name".
endchoice
#
# Kernel compression format
#
choice
prompt "Kernel compression format"
help
This selection will just ensure that the correct host tools are build.
The actual compression for the kernel should be selected in the
kernel configuration menu.
config BR2_LINUX_KERNEL_GZIP
bool "gzip compression"
config BR2_LINUX_KERNEL_LZ4
bool "lz4 compression"
config BR2_LINUX_KERNEL_LZMA
bool "lzma compression"
config BR2_LINUX_KERNEL_LZO
bool "lzo compression"
config BR2_LINUX_KERNEL_XZ
bool "xz compression"
endchoice
config BR2_LINUX_KERNEL_IMAGE_TARGET_NAME
string "Kernel image target name"
depends on BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM
help
Specify the kernel make target to build the kernel that you
need.
config BR2_LINUX_KERNEL_IMAGE_NAME
string "Kernel image name"
depends on BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM
help
The filename of the kernel image, if it is different from the
make target (above). Only Xtensa uses a filename different from
the make target. Defaults to BR2_LINUX_KERNEL_IMAGE_TARGET_NAME.
If unsure, leave it empty.
config BR2_LINUX_KERNEL_UIMAGE_LOADADDR
string "load address (for 3.7+ multi-platform image)"
depends on BR2_arm || BR2_armeb
depends on BR2_LINUX_KERNEL_UIMAGE || BR2_LINUX_KERNEL_APPENDED_UIMAGE
help
If your ARM system's Linux kernel is configured with the new (3.7+)
multi-architecture support (CONFIG_ARCH_MULTIPLATFORM=y in your
kernel config), then it is necessary to specify a kernel load address
when building the uImage. This should be a hexadecimal string
beginning with 0x, for example: 0x00008000.
If unsure, let this option empty.
config BR2_LINUX_KERNEL_DTS_SUPPORT
bool "Build a Device Tree Blob (DTB)"
help
Compile one or more device tree sources into device tree blobs.
Select the dts files to compile in the options below.
if BR2_LINUX_KERNEL_DTS_SUPPORT
# We have mainly three cases when it comes to device tree support:
# 1) We don't want any support at all. Then the ..DTS_SUPPORT
# variable won't be set
# 2) We want device tree support, so we need the user to enter the
# device tree name or the path to the custom device he uses, but
# the kernel abstracts this from us and only build an image that
# looks like a regular kernel image. In this case, we only need
# to derive the kernel image name from the given device tree
# name, and all the rest is as usual
# 3) We want device tree support, but the kernel requires us to
# build the device tree blob separately. In this case, some
# more logic will be needed.
# The variable below address the second case, were you only want
# limited actions from buildroot.
config BR2_LINUX_KERNEL_DTB_IS_SELF_BUILT
bool
config BR2_LINUX_KERNEL_APPENDED_DTB
bool
choice
prompt "Device tree source"
default BR2_LINUX_KERNEL_USE_INTREE_DTS
config BR2_LINUX_KERNEL_USE_INTREE_DTS
bool "Use a device tree present in the kernel."
help
Use a device tree source distributed with
the kernel sources. The dts files are located
in the arch/<arch>/boot/dts folder.
config BR2_LINUX_KERNEL_USE_CUSTOM_DTS
bool "Use a custom device tree file"
help
Use a custom device tree file, i.e, a device
tree file that does not belong to the kernel
source tree.
endchoice
config BR2_LINUX_KERNEL_INTREE_DTS_NAME
string "Device Tree Source file names"
depends on BR2_LINUX_KERNEL_USE_INTREE_DTS
help
Name of the device tree source file, without
the trailing .dts. You can provide a list of
dts files to build, separated by spaces.
config BR2_LINUX_KERNEL_CUSTOM_DTS_PATH
string "Device Tree Source file paths"
depends on BR2_LINUX_KERNEL_USE_CUSTOM_DTS
help
Path to the device tree source files. You can
provide a list of dts paths to copy and build,
separated by spaces.
endif
config BR2_LINUX_KERNEL_INSTALL_TARGET
bool "Install kernel image to /boot in target"
depends on !BR2_TARGET_ROOTFS_INITRAMFS
help
Select this option to have the kernel image installed to
/boot in the target root filesystem, as is typically done on
x86/x86_64 systems.
Note that this option also installs the Device Tree Blobs to
/boot if DTBs have been generated by the kernel build
process.
# Linux extensions
source "linux/Config.ext.in"
# Linux tools
source "linux/Config.tools.in"
endif # BR2_LINUX_KERNEL
endmenu