| ################################################################################ |
| # |
| # grub |
| # |
| ################################################################################ |
| |
| GRUB_VERSION = 0.97 |
| GRUB_SOURCE = grub_$(GRUB_VERSION).orig.tar.gz |
| GRUB_PATCH = grub_$(GRUB_VERSION)-67.diff.gz |
| GRUB_SITE = http://snapshot.debian.org/archive/debian/20130129T225227Z/pool/main/g/grub |
| |
| GRUB_LICENSE = GPLv2+ |
| GRUB_LICENSE_FILES = COPYING |
| |
| # Passing -O0 since the default -O2 passed by Buildroot generates |
| # non-working stage2. Passing --build-id=none to the linker, because |
| # the ".note.gnu.build-id" ELF sections generated by default confuse |
| # objcopy when generating raw binaries. Passing -fno-stack-protector |
| # to avoid undefined references to __stack_chk_fail. |
| GRUB_CFLAGS = \ |
| -DSUPPORT_LOOPDEV \ |
| -O0 -Wl,--build-id=none \ |
| -fno-stack-protector |
| |
| GRUB_CONFIG-y += $(if $(BR2_TARGET_GRUB_SPLASH),--enable-graphics,--disable-graphics) |
| |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_DISKLESS) += --enable-diskless |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_3c595) += --enable-3c595 |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_3c90x) += --enable-3c90x |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_davicom) += --enable-davicom |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_e1000) += --enable-e1000 |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_eepro100) += --enable-eepro100 |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_epic100) += --enable-epic100 |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_forcedeth) += --enable-forcedeth |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_natsemi) += --enable-natsemi |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_ns83820) += --enable-ns83820 |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_ns8390) += --enable-ns8390 |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_pcnet32) += --enable-pcnet32 |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_pnic) += --enable-pnic |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_rtl8139) += --enable-rtl8139 |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_r8169) += --enable-r8169 |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_sis900) += --enable-sis900 |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_tg3) += --enable-tg3 |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_tulip) += --enable-tulip |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_tlan) += --enable-tlan |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_undi) += --enable-undi |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_via_rhine) += --enable-via-rhine |
| GRUB_CONFIG-$(BR2_TARGET_GRUB_w89c840) += --enable-w89c840 |
| |
| GRUB_CONFIG-y += $(if $(BR2_TARGET_GRUB_FS_EXT2),--enable-ext2fs,--disable-ext2fs) |
| GRUB_CONFIG-y += $(if $(BR2_TARGET_GRUB_FS_FAT),--enable-fat,--disable-fat) |
| GRUB_CONFIG-y += $(if $(BR2_TARGET_GRUB_FS_ISO9660),--enable-iso9660,--disable-iso9660) |
| GRUB_CONFIG-y += $(if $(BR2_TARGET_GRUB_FS_JFS),--enable-jfs,--disable-jfs) |
| GRUB_CONFIG-y += $(if $(BR2_TARGET_GRUB_FS_REISERFS),--enable-reiserfs,--disable-reiserfs) |
| GRUB_CONFIG-y += $(if $(BR2_TARGET_GRUB_FS_XFS),--enable-xfs,--disable-xfs) |
| GRUB_CONFIG-y += --disable-ffs --disable-ufs2 --disable-minix --disable-vstafs |
| |
| GRUB_STAGE_1_5_TO_INSTALL += $(if $(BR2_TARGET_GRUB_FS_EXT2),e2fs) |
| GRUB_STAGE_1_5_TO_INSTALL += $(if $(BR2_TARGET_GRUB_FS_FAT),fat) |
| GRUB_STAGE_1_5_TO_INSTALL += $(if $(BR2_TARGET_GRUB_FS_ISO9660),iso9660) |
| GRUB_STAGE_1_5_TO_INSTALL += $(if $(BR2_TARGET_GRUB_FS_JFS),jfs) |
| GRUB_STAGE_1_5_TO_INSTALL += $(if $(BR2_TARGET_GRUB_FS_REISERFS),reiserfs) |
| GRUB_STAGE_1_5_TO_INSTALL += $(if $(BR2_TARGET_GRUB_FS_XFS),xfs) |
| |
| define GRUB_DEBIAN_PATCHES |
| # Apply the patches from the Debian patch |
| (cd $(@D) ; for f in `cat debian/patches/series | grep -v ^#` ; do \ |
| cat debian/patches/$$f | patch -g0 -p1 ; \ |
| done) |
| endef |
| |
| GRUB_POST_PATCH_HOOKS += GRUB_DEBIAN_PATCHES |
| |
| GRUB_CONF_ENV = \ |
| $(HOST_CONFIGURE_OPTS) \ |
| CFLAGS="$(HOST_CFLAGS) $(GRUB_CFLAGS) -m32" |
| |
| GRUB_CONF_OPT = \ |
| --disable-auto-linux-mem-opt \ |
| $(GRUB_CONFIG-y) |
| |
| ifeq ($(BR2_TARGET_GRUB_SPLASH),y) |
| define GRUB_INSTALL_SPLASH |
| cp boot/grub/splash.xpm.gz $(TARGET_DIR)/boot/grub/ |
| endef |
| else |
| define GRUB_INSTALL_SPLASH |
| $(SED) '/^splashimage/d' $(TARGET_DIR)/boot/grub/menu.lst |
| endef |
| endif |
| |
| # We're cheating here as we're installing the grub binary not in the |
| # target directory (where it is useless), but in the host |
| # directory. This grub binary can be used to install grub into the MBR |
| # of a disk or disk image. |
| |
| define GRUB_INSTALL_TARGET_CMDS |
| install -m 0755 -D $(@D)/grub/grub $(HOST_DIR)/sbin/grub |
| mkdir -p $(TARGET_DIR)/boot/grub |
| cp $(@D)/stage1/stage1 $(TARGET_DIR)/boot/grub |
| for f in $(GRUB_STAGE_1_5_TO_INSTALL) ; do \ |
| cp $(@D)/stage2/$${f}_stage1_5 $(TARGET_DIR)/boot/grub ; \ |
| done |
| cp $(@D)/stage2/stage2 $(TARGET_DIR)/boot/grub |
| cp boot/grub/menu.lst $(TARGET_DIR)/boot/grub |
| $(GRUB_INSTALL_SPLASH) |
| endef |
| |
| $(eval $(autotools-package)) |
