| BeagleBone |
| |
| Intro |
| ===== |
| To be able to use BeagleBone board with the images generated by |
| Buildroot, you have to prepare the SDCard. |
| |
| How to build it |
| =============== |
| |
| $ make beaglebone_defconfig |
| |
| Then you can edit the build options using |
| |
| $ make menuconfig |
| |
| Compile all and build rootfs image: |
| |
| $ make |
| |
| Result of the build |
| ------------------- |
| |
| After building, you should get a tree like this: |
| |
| output/images/ |
| ├── am335x-boneblack.dtb |
| ├── am335x-bone.dtb |
| ├── MLO |
| ├── rootfs.ext2 |
| ├── sdcard.img |
| ├── u-boot.img |
| ├── uEnv.txt |
| └── zImage |
| |
| How to write the microSD card |
| ============================= |
| |
| Once the build process is finished you will have an image called "sdcard.img" |
| in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an SD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
