| This is the minimal buildroot support for the Congatec QMX6 Qseven CoM |
| |
| conga-QMX6 is based on the freescale iMX6 SoC. For more information please |
| have a look at http://www.congatec.com/products/qseven/conga-qmx6.html |
| |
| The configuration is based on the currently latest kernel release from |
| Congatec's git repository which is based on 3.0.35. The bootloader u-boot |
| is preconfigured on the CPU module and does not need to be replaced. |
| |
| To build the default configuration you only have to: |
| |
| make qmx6_defconfig && make |
| |
| You will need a microSD card of sufficient size and the first or only |
| partition configured as Linux type. |
| |
| To transfer the system to the card do: |
| |
| $ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1 |
| |
| You can optionally extend the filesystem size to the whole partition: |
| |
| $ sudo resize2fs /dev/sdX1 |
| |
| You can also update the card image without completely rewriting it: |
| |
| $ sudo mount /dev/sdX1 /mnt |
| $ sudo tar xf output/images/rootfs.tar -C /mnt |
| $ sudo umount /mnt |
| |
| Connect a terminal program to the rs232 connector marked "CONSOLE" |
| with baudrate set to 115200, insert the microSD card into the socket |
| on the CPU module and power the board to watch the system boot. |
| |
| Booting from the SD card slot on the base board is currently not |
| supported. |
