| Intro |
| ===== |
| |
| This default configuration will allow you to start experimenting with the |
| buildroot environment for the Orangepi Lite2. With the current configuration |
| it will bring-up the board, and allow access through the serial console. |
| |
| Orangepi Lite2 link: |
| http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Lite-2.html |
| |
| Wiki link: |
| https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Lite2 |
| |
| How to build |
| ============ |
| |
| $ make orangepi_lite2_defconfig |
| $ make |
| |
| Note: you will need access to the internet to download the required |
| sources. |
| |
| How to write the SD card |
| ======================== |
| |
| Once the build process is finished you will have an image called "sdcard.img" |
| in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an SD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| $ sudo sync |
| |
| Insert the micro SDcard in your Orangepi Lite2 and power it up. The console |
| is on the serial line, 115200 8N1. |
| |
| WiFi |
| ==== |
| |
| # wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf |
| (type password and enter) |
| # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B |
| # udhcpc -i wlan0 |
| # ping google.com |
