| STM32MP157A Discovery Kit v1 |
| |
| Intro |
| ===== |
| |
| This configuration supports the STM32MP157 Discovery Kit 1 (DK1) |
| platform: |
| |
| https://www.st.com/en/evaluation-tools/stm32mp157a-dk1.html |
| |
| How to build |
| ============ |
| |
| $ make stm32mp157a_dk1_defconfig |
| $ make |
| |
| How to write the microSD card |
| ============================= |
| |
| Once the build process is finished you will have an image called |
| "sdcard.img" in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an microSD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Boot the board |
| ============== |
| |
| (1) Insert the microSD card in connector CN15 |
| |
| (2) Plug a micro-USB cable in connector CN11 and run your serial |
| communication program on /dev/ttyACM0. |
| |
| (3) Plug a USB-C cable in CN6 to power-up the board. |
| |
| (4) The system will start, with the console on UART, but also visible |
| on the screen. |
