| A10-OLinuXino-LIME |
| |
| Intro |
| ===== |
| |
| These are open hardware boards, all based on the Allwinner A10 SoC. |
| |
| for more details about the boards see the following pages: |
| - https://www.olimex.com/Products/OLinuXino/open-source-hardware |
| - https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME/ |
| |
| The following defconfigs are available: |
| - olimex_a10_olinuxino_lime_defconfig |
| for the A10-OLinuXino-LIME board using mainline kernel |
| |
| (see http://linux-sunxi.org/Linux_Kernel for more details) |
| |
| How to build it |
| =============== |
| |
| Configure Buildroot: |
| |
| $ make <board>_defconfig |
| |
| Compile everything and build the rootfs image: |
| |
| $ make |
| |
| Result of the build |
| ------------------- |
| |
| After building, you should get a tree like this: |
| |
| output/images/ |
| +-- boot.scr |
| +-- rootfs.ext2 |
| +-- rootfs.ext4 -> rootfs.ext2 |
| +-- sdcard.img |
| +-- sun4i-a10-olinuxino-lime.dtb (lime, mainline) |
| +-- u-boot.bin |
| +-- u-boot-sunxi-with-spl.bin |
| `-- zImage |
| |
| |
| How to write the SD card |
| ======================== |
| |
| The sdcard.img file is a complete bootable image ready to be written |
| on the boot medium. To install it, simply copy the image to a uSD |
| card: |
| |
| # dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Where 'sdX' is the device node of the uSD. |
| |
| Eject the SD card, insert it in the A10-OLinuXino board, and power it up. |
| |
