| A33-OLinuXino |
| |
| Intro |
| ===== |
| |
| This board is based on Allwinner A33 SoC. |
| |
| Home Page: https://www.olimex.com/Products/OLinuXino/A33/A33-OLinuXino/open-source-hardware |
| Wiki: https://wiki.amarulasolutions.com/bsp/sunxi/a33/Olimex-A33-Olinuxino.html |
| |
| How to build it |
| =============== |
| |
| Configure Buildroot: |
| |
| $ make olimex_a33_olinuxino_defconfig |
| |
| Build everything by running: |
| |
| $ make |
| |
| Result of the build |
| ------------------- |
| |
| After building, you should get a tree like this: |
| |
| output/images/ |
| ├── boot.scr |
| ├── rootfs.ext2 |
| ├── rootfs.ext4 -> rootfs.ext2 |
| ├── rootfs.tar |
| ├── sdcard.img |
| ├── sun8i-a33-olinuxino.dtb |
| ├── u-boot.bin |
| ├── u-boot-sunxi-with-spl.bin |
| └── zImage |
| |
| |
| How to write the SD card |
| ======================== |
| |
| The sdcard.img file is a complete bootable image ready to be written |
| on the boot medium. To install it, simply copy the image to a uSD |
| card: |
| |
| # dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Where 'sdX' is the device node of the uSD. |
| |
| Eject the SD card, insert it in the A33-OLinuXino board, and power it up. |
