| Arrow Avenger96 |
| |
| Intro |
| ===== |
| |
| This configuration supports the Arrow Avenger96 board: |
| |
| https://wiki.dh-electronics.com/index.php/Avenger96 |
| |
| How to build |
| ============ |
| |
| $ make avenger96_defconfig |
| $ make |
| |
| How to write the microSD card |
| ============================= |
| |
| WARNING! This will destroy all the card content. Use with care! |
| |
| Once the build process is finished you will have an image called |
| "sdcard.img" in the output/images/ directory. |
| |
| Copy the bootable "sdcard.img" onto an microSD card with "dd": |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Boot the board |
| ============== |
| |
| (1) Configure the boot switches for boot from microsd: 1-0-1 |
| |
| (2) Insert the microSD card in the slot |
| |
| (3) Plug a serial adapter (beware: 1v8 levels!) to the low speed |
| expansion connector |
| |
| (4) Plug in power cable |
| |
| (5) The system will start, with the console on UART, but also visible |
| on the screen. |
