| Acme Systems Aria G25 |
| |
| Build instructions |
| ================== |
| |
| To build an image for the Aria G25 choose the configuration |
| corresponding to the Aria variant. |
| |
| For 128MB RAM variant type: |
| |
| $ make acmesystems_aria_g25_128mb_defconfig |
| |
| else for 256MB RAM variant type: |
| |
| $ make acmesystems_aria_g25_256mb_defconfig |
| |
| To customize the configuration choosed type: |
| |
| $ make menuconfig |
| |
| When you are ready to start building Buildroot type: |
| |
| $ make |
| |
| How to write the microSD card |
| ============================= |
| |
| Once the build process is finished you will have an image called |
| "sdcard.img" in the output/images/ directory. |
| |
| Write the bootable SD card image "sdcard.img" onto an SD card with |
| "dd" command: |
| |
| $ sudo dd if=output/images/sdcard.img of=/dev/sdX |
| |
| Assuming your Aria G25 baseboard has a MicroSD socket, for example |
| with the Terra baseboard, insert the microSD card into the baseboard |
| slot and power it. |
| |
| To get the kernel log messages you can use a DPI cable |
| (http://www.acmesystems.it/DPI) |
| |
| You can find additional informations, tutorials and a very |
| comprehensive documentation on http://www.acmesystems.it/aria. |
