blob: 5811884d4dcc18fc12df7739fadbffbc28efbff6 [file] [log] [blame]
Intro
=====
This default configuration will allow you to start experimenting with the
buildroot environment for the Orangepi Prime. With the current configuration
it will bring-up the board, and allow access through the serial console.
Orangepi Prime link:
http://www.orangepi.org/OrangePiPrime/
Wiki link:
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Prime
This configuration uses U-Boot mainline and kernel mainline.
How to build
============
$ make orangepi_prime_defconfig
$ make
Note: you will need access to the internet to download the required
sources.
How to write the SD card
========================
Once the build process is finished you will have an image called "sdcard.img"
in the output/images/ directory.
Copy the bootable "sdcard.img" onto an SD card with "dd":
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
$ sudo sync
Insert the micro SDcard in your Orangepi Prime and power it up. The console
is on the serial line, 115200 8N1.