| Orangepi Rk3399 |
| ================ |
| http://www.orangepi.org/Orange%20Pi%20RK3399/ |
| |
| Build: |
| ====== |
| $ make orangepi_rk3399_defconfig |
| $ make |
| |
| Files created in output directory |
| ================================= |
| |
| output/images |
| |
| ├── bl31.elf |
| ├── boot.vfat |
| ├── extlinux |
| ├── idbloader.img |
| ├── Image |
| ├── rk3399-orangepi.dtb |
| ├── rootfs.ext2 |
| ├── rootfs.ext4 -> rootfs.ext2 |
| ├── rootfs.tar |
| ├── sdcard.img |
| ├── u-boot.bin |
| └── u-boot.itb |
| |
| Creating bootable SD card: |
| ========================== |
| |
| Simply invoke (as root) |
| |
| sudo dd if=output/images/sdcard.img of=/dev/sdX && sync |
| |
| Where X is your SD card device. |
| |
| Booting: |
| ======== |
| Orangepi-RK3399 by default boots from emmc. For SD card boot to |
| happen, emmc should be empty. If emmc happens to have any bootable |
| image then erase emmc so that bootrom will look for a proper image in SD. |
| |
| emmc can be erased once after booted into linux as shown in below link. |
| |
| https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html |
| |
| Serial console: |
| --------------- |
| |
| Baudrate for this board is 1500000. |
| |
| Login: |
| ------ |
| Enter 'root' as login user, and the prompt is ready. |
| |
| https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/orangepi.html |
