blob: 81cc5e409b72b22ffb2da3350505d9738c7e798f [file] [log] [blame]
cubieboard and cubieboard2
-----
Intro
-----
To be able to use your cubieboard board with the images generated by
Buildroot you have to correctly setup the SD card.
For more information, please see http://linux-sunxi.org/FirstSteps
---------------
How to build it
---------------
You need to use the cubieboard_defconfig or cubieboard2_defconfig, to do so:
* make cubieboard_defconfig
or
* make cubieboard2_defconfig
And to compile:
* make
-----------------
What is generated
-----------------
After building, you should obtain this tree:
output/images/
+-- rootfs.tar
+-- boot.scr
+-- script.bin
+-- sunxi-spl.bin
+-- u-boot.bin
+-- u-boot-sunxi-with-spl.bin (optional)
`-- uImage
--------------------------
How setting up the SD card
--------------------------
Depending on the rootfs size, you might want to use a 2GB or larger SD-card.
The script mkcubiecard.sh will take care of partitioning and formatting
the SD-card.
BEWARE! This process will erase your SD card.
Use dmesg to find out where the SD card is attached in the /dev tree
(<device>) and then:
# sudo ./mkcubiecard.sh <images_dir> <device>
where:
- <images_dir> is the directory containing the generated files (usually
output/images)
- <device> is the device file of the SD card (usually /dev/sdX)
--
Carlo Caione <carlo.caione@gmail.com>